[PATCH 3/5] arm64: dts: qcom: pm7250b: Add node for PMIC VBUS booster

From: Luca Weiss <luca.weiss@fairphone.com>
To: Bjorn Andersson <andersson@kernel.org>,
	 Konrad Dybcio <konrad.dybcio@linaro.org>,
	 Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,  Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Wesley Cheng <quic_wcheng@quicinc.com>,
	 Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org,  linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org,  devicetree@vger.kernel.org,
	linux-usb@vger.kernel.org,  Luca Weiss <luca.weiss@fairphone.com>
Subject: [PATCH 3/5] arm64: dts: qcom: pm7250b: Add node for PMIC VBUS booster
Date: Fri, 22 Mar 2024 09:01:34 +0100	[thread overview]
Message-ID: <20240322-fp4-tcpm-v1-3-c5644099d57b@fairphone.com> (raw)
In-Reply-To: <20240322-fp4-tcpm-v1-0-c5644099d57b@fairphone.com>

Add the required DTS node for the USB VBUS output regulator, which is
available on PM7250B. This will provide the VBUS source to connected
peripherals.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
index 3bf7cf5d1700..91a046b3529c 100644
--- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -45,6 +45,12 @@ pmic@PM7250B_SID {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm7250b_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg";
+			status = "disabled";
+			reg = <0x1100>;
+		};
+
 		pm7250b_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;

-- 
2.44.0

