From: Alex Riesen <alexander.riesen@cetitec.com> To: Kieran Bingham <kieran.bingham@ideasonboard.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org>, Mauro Carvalho Chehab <mchehab@kernel.org>, Hans Verkuil <hverkuil-cisco@xs4all.nl>, "Laurent Pinchart" <laurent.pinchart@ideasonboard.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>, <devel@driverdev.osuosl.org>, <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-renesas-soc@vger.kernel.org> Subject: [PATCH v3 06/11] media: adv748x: prepare/enable mclk when the audio is used Date: Fri, 20 Mar 2020 17:12:02 +0100 [thread overview] Message-ID: <7ed1287d00da70de13627480b1601bfd2c6e570a.1584720678.git.alexander.riesen@cetitec.com> (raw) In-Reply-To: <cover.1584720678.git.alexander.riesen@cetitec.com> As there is nothing else (the consumers are supposed to do that) which enables the clock, do it in the driver. Signed-off-by: Alexander Riesen <alexander.riesen@cetitec.com> -- v3: added --- drivers/media/i2c/adv748x/adv748x-dai.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/media/i2c/adv748x/adv748x-dai.c b/drivers/media/i2c/adv748x/adv748x-dai.c index 6fce7d000423..1c673efd4745 100644 --- a/drivers/media/i2c/adv748x/adv748x-dai.c +++ b/drivers/media/i2c/adv748x/adv748x-dai.c @@ -117,11 +117,22 @@ static int adv748x_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) static int adv748x_dai_startup(struct snd_pcm_substream *sub, struct snd_soc_dai *dai) { + int ret; struct adv748x_state *state = state_of(dai); if (sub->stream != SNDRV_PCM_STREAM_CAPTURE) return -EINVAL; - return set_audio_pads_state(state, 1); + ret = set_audio_pads_state(state, 1); + if (ret) + goto fail; + ret = clk_prepare_enable(state->dai.mclk); + if (ret) + goto fail_pwdn; + return 0; +fail_pwdn: + set_audio_pads_state(state, 0); +fail: + return ret; } static int adv748x_dai_hw_params(struct snd_pcm_substream *sub, @@ -174,6 +185,7 @@ static void adv748x_dai_shutdown(struct snd_pcm_substream *sub, struct snd_soc_d { struct adv748x_state *state = state_of(dai); + clk_disable_unprepare(state->dai.mclk); set_audio_pads_state(state, 0); } -- 2.25.1.25.g9ecbe7eb18
WARNING: multiple messages have this Message-ID (diff)
From: Alex Riesen <alexander.riesen@cetitec.com> To: Kieran Bingham <kieran.bingham@ideasonboard.com> Cc: Mark Rutland <mark.rutland@arm.com>, devel@driverdev.osuosl.org, Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Geert Uytterhoeven <geert@linux-m68k.org>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Hans Verkuil <hverkuil-cisco@xs4all.nl>, Mauro Carvalho Chehab <mchehab@kernel.org>, linux-media@vger.kernel.org Subject: [PATCH v3 06/11] media: adv748x: prepare/enable mclk when the audio is used Date: Fri, 20 Mar 2020 17:12:02 +0100 [thread overview] Message-ID: <7ed1287d00da70de13627480b1601bfd2c6e570a.1584720678.git.alexander.riesen@cetitec.com> (raw) In-Reply-To: <cover.1584720678.git.alexander.riesen@cetitec.com> As there is nothing else (the consumers are supposed to do that) which enables the clock, do it in the driver. Signed-off-by: Alexander Riesen <alexander.riesen@cetitec.com> -- v3: added --- drivers/media/i2c/adv748x/adv748x-dai.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/media/i2c/adv748x/adv748x-dai.c b/drivers/media/i2c/adv748x/adv748x-dai.c index 6fce7d000423..1c673efd4745 100644 --- a/drivers/media/i2c/adv748x/adv748x-dai.c +++ b/drivers/media/i2c/adv748x/adv748x-dai.c @@ -117,11 +117,22 @@ static int adv748x_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) static int adv748x_dai_startup(struct snd_pcm_substream *sub, struct snd_soc_dai *dai) { + int ret; struct adv748x_state *state = state_of(dai); if (sub->stream != SNDRV_PCM_STREAM_CAPTURE) return -EINVAL; - return set_audio_pads_state(state, 1); + ret = set_audio_pads_state(state, 1); + if (ret) + goto fail; + ret = clk_prepare_enable(state->dai.mclk); + if (ret) + goto fail_pwdn; + return 0; +fail_pwdn: + set_audio_pads_state(state, 0); +fail: + return ret; } static int adv748x_dai_hw_params(struct snd_pcm_substream *sub, @@ -174,6 +185,7 @@ static void adv748x_dai_shutdown(struct snd_pcm_substream *sub, struct snd_soc_d { struct adv748x_state *state = state_of(dai); + clk_disable_unprepare(state->dai.mclk); set_audio_pads_state(state, 0); } -- 2.25.1.25.g9ecbe7eb18 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2020-03-20 16:34 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-20 16:11 [PATCH v3 00/11] media: adv748x: add support for HDMI audio Alex Riesen 2020-03-20 16:11 ` Alex Riesen 2020-03-20 16:11 ` [PATCH v3 01/11] media: adv748x: fix end-of-line terminators in diagnostic statements Alex Riesen 2020-03-20 16:11 ` Alex Riesen 2020-03-20 16:11 ` [PATCH v3 02/11] media: adv748x: include everything adv748x.h needs into the file Alex Riesen 2020-03-20 16:11 ` Alex Riesen 2020-03-20 16:11 ` [PATCH v3 03/11] media: adv748x: reduce amount of code for bitwise modifications of device registers Alex Riesen 2020-03-20 16:11 ` Alex Riesen 2020-03-20 16:11 ` [PATCH v3 04/11] media: adv748x: add definitions for audio output related registers Alex Riesen 2020-03-20 16:11 ` Alex Riesen 2020-03-20 16:12 ` [PATCH v3 05/11] media: adv748x: add support for HDMI audio Alex Riesen 2020-03-20 16:12 ` Alex Riesen 2020-03-21 1:09 ` Stephen Boyd 2020-03-21 1:09 ` Stephen Boyd 2020-03-23 8:36 ` Alex Riesen 2020-03-23 8:36 ` Alex Riesen 2020-03-20 16:12 ` Alex Riesen [this message] 2020-03-20 16:12 ` [PATCH v3 06/11] media: adv748x: prepare/enable mclk when the audio is used Alex Riesen 2020-03-20 16:12 ` [PATCH v3 07/11] media: adv748x: only activate DAI if it is described in device tree Alex Riesen 2020-03-20 16:12 ` Alex Riesen 2020-03-20 16:12 ` [PATCH v3 08/11] dt-bindings: adv748x: add information about serial audio interface (I2S/TDM) Alex Riesen 2020-03-20 16:12 ` Alex Riesen 2020-03-20 16:12 ` [PATCH v3 09/11] arm64: dts: renesas: salvator: add a connection from adv748x codec (HDMI input) to the R-Car SoC Alex Riesen 2020-03-20 16:12 ` Alex Riesen 2020-03-23 8:34 ` Geert Uytterhoeven 2020-03-23 8:34 ` Geert Uytterhoeven 2020-03-23 8:40 ` Alex Riesen 2020-03-23 8:40 ` Alex Riesen 2020-03-23 8:45 ` Alex Riesen 2020-03-23 8:45 ` Alex Riesen 2020-03-23 8:48 ` Geert Uytterhoeven 2020-03-23 8:48 ` Geert Uytterhoeven 2020-03-23 8:50 ` Alex Riesen 2020-03-23 8:50 ` Alex Riesen 2020-03-20 16:12 ` [PATCH v3 10/11] media: adv748x: add support for log_status ioctl Alex Riesen 2020-03-20 16:12 ` Alex Riesen 2020-03-20 16:12 ` [PATCH v3 11/11] media: adv748x: allow the HDMI sub-device to accept EDID Alex Riesen 2020-03-20 16:12 ` Alex Riesen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=7ed1287d00da70de13627480b1601bfd2c6e570a.1584720678.git.alexander.riesen@cetitec.com \ --to=alexander.riesen@cetitec.com \ --cc=devel@driverdev.osuosl.org \ --cc=devicetree@vger.kernel.org \ --cc=geert@linux-m68k.org \ --cc=hverkuil-cisco@xs4all.nl \ --cc=kieran.bingham@ideasonboard.com \ --cc=kuninori.morimoto.gx@renesas.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mchehab@kernel.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.