From: Baruch Siach <baruch@tkos.co.il> To: "Thierry Reding" <thierry.reding@gmail.com>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Lee Jones" <lee.jones@linaro.org>, "Linus Walleij" <linus.walleij@linaro.org>, "Bartosz Golaszewski" <bgolaszewski@baylibre.com> Cc: Baruch Siach <baruch@tkos.co.il>, Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, Gregory Clement <gregory.clement@bootlin.com>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Chris Packham <chris.packham@alliedtelesis.co.nz>, Sascha Hauer <s.hauer@pengutronix.de>, Ralph Sennhauser <ralph.sennhauser@gmail.com>, linux-pwm@vger.kernel.org, linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/5] dt-bindings: ap806: document gpio pwm-offset property Date: Wed, 18 Nov 2020 12:30:46 +0200 [thread overview] Message-ID: <8e9c2730806e47524a30c52366edd67670736f0e.1605694661.git.baruch@tkos.co.il> (raw) In-Reply-To: <cover.1605694661.git.baruch@tkos.co.il> Update the example as well. Add the '#pwm-cells' and 'clocks' properties for a complete working example. Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- .../bindings/arm/marvell/ap80x-system-controller.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt index e31511255d8e..a754e8992450 100644 --- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt @@ -80,6 +80,11 @@ Required properties: - offset: offset address inside the syscon block +Optional properties: + +- pwm-offset: offset address of PWM duration control registers inside the + syscon block + Example: ap_syscon: system-controller@6f4000 { compatible = "syscon", "simple-mfd"; @@ -101,6 +106,9 @@ ap_syscon: system-controller@6f4000 { gpio-controller; #gpio-cells = <2>; gpio-ranges = <&ap_pinctrl 0 0 19>; + pwm-offset = <0x10c0>; + #pwm-cells = <2>; + clocks = <&ap_clk 3>; }; }; -- 2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Baruch Siach <baruch@tkos.co.il> To: "Thierry Reding" <thierry.reding@gmail.com>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Lee Jones" <lee.jones@linaro.org>, "Linus Walleij" <linus.walleij@linaro.org>, "Bartosz Golaszewski" <bgolaszewski@baylibre.com> Cc: Andrew Lunn <andrew@lunn.ch>, Baruch Siach <baruch@tkos.co.il>, Jason Cooper <jason@lakedaemon.net>, linux-pwm@vger.kernel.org, Gregory Clement <gregory.clement@bootlin.com>, linux-gpio@vger.kernel.org, Chris Packham <chris.packham@alliedtelesis.co.nz>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Ralph Sennhauser <ralph.sennhauser@gmail.com>, Sascha Hauer <s.hauer@pengutronix.de>, linux-arm-kernel@lists.infradead.org, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Subject: [PATCH 5/5] dt-bindings: ap806: document gpio pwm-offset property Date: Wed, 18 Nov 2020 12:30:46 +0200 [thread overview] Message-ID: <8e9c2730806e47524a30c52366edd67670736f0e.1605694661.git.baruch@tkos.co.il> (raw) In-Reply-To: <cover.1605694661.git.baruch@tkos.co.il> Update the example as well. Add the '#pwm-cells' and 'clocks' properties for a complete working example. Signed-off-by: Baruch Siach <baruch@tkos.co.il> --- .../bindings/arm/marvell/ap80x-system-controller.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt index e31511255d8e..a754e8992450 100644 --- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt @@ -80,6 +80,11 @@ Required properties: - offset: offset address inside the syscon block +Optional properties: + +- pwm-offset: offset address of PWM duration control registers inside the + syscon block + Example: ap_syscon: system-controller@6f4000 { compatible = "syscon", "simple-mfd"; @@ -101,6 +106,9 @@ ap_syscon: system-controller@6f4000 { gpio-controller; #gpio-cells = <2>; gpio-ranges = <&ap_pinctrl 0 0 19>; + pwm-offset = <0x10c0>; + #pwm-cells = <2>; + clocks = <&ap_clk 3>; }; }; -- 2.29.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-18 10:47 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-18 10:30 [PATCH 0/5] gpio: mvebu: Armada 8K/7K PWM support Baruch Siach 2020-11-18 10:30 ` Baruch Siach 2020-11-18 10:30 ` [PATCH 1/5] gpio: mvebu: update Armada XP per-CPU comment Baruch Siach 2020-11-18 10:30 ` Baruch Siach 2020-11-18 22:47 ` Andrew Lunn 2020-11-18 22:47 ` Andrew Lunn 2020-11-18 10:30 ` [PATCH 2/5] gpio: mvebu: switch pwm duration registers to regmap Baruch Siach 2020-11-18 10:30 ` Baruch Siach 2020-11-18 22:59 ` Andrew Lunn 2020-11-18 22:59 ` Andrew Lunn 2020-11-18 10:30 ` [PATCH 3/5] gpio: mvebu: add pwm support for Armada 8K/7K Baruch Siach 2020-11-18 10:30 ` Baruch Siach 2020-11-18 23:18 ` Andrew Lunn 2020-11-18 23:18 ` Andrew Lunn 2020-11-19 6:21 ` Baruch Siach 2020-11-19 6:21 ` Baruch Siach 2020-11-19 13:34 ` Andrew Lunn 2020-11-19 13:34 ` Andrew Lunn 2020-11-19 13:47 ` Baruch Siach 2020-11-19 13:47 ` Baruch Siach 2020-12-01 18:16 ` Bartosz Golaszewski 2020-12-01 18:16 ` Bartosz Golaszewski 2020-12-01 18:21 ` Baruch Siach 2020-12-01 18:21 ` Baruch Siach 2020-11-18 10:30 ` [PATCH 4/5] arm64: dts: armada: add pwm offsets for ap/cp gpios Baruch Siach 2020-11-18 10:30 ` Baruch Siach 2020-11-18 10:30 ` Baruch Siach [this message] 2020-11-18 10:30 ` [PATCH 5/5] dt-bindings: ap806: document gpio pwm-offset property Baruch Siach 2020-11-18 22:46 ` [PATCH 0/5] gpio: mvebu: Armada 8K/7K PWM support Andrew Lunn 2020-11-18 22:46 ` Andrew Lunn 2020-11-19 5:49 ` Baruch Siach 2020-11-19 5:49 ` Baruch Siach
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=8e9c2730806e47524a30c52366edd67670736f0e.1605694661.git.baruch@tkos.co.il \ --to=baruch@tkos.co.il \ --cc=andrew@lunn.ch \ --cc=bgolaszewski@baylibre.com \ --cc=chris.packham@alliedtelesis.co.nz \ --cc=gregory.clement@bootlin.com \ --cc=jason@lakedaemon.net \ --cc=lee.jones@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-pwm@vger.kernel.org \ --cc=ralph.sennhauser@gmail.com \ --cc=s.hauer@pengutronix.de \ --cc=sebastian.hesselbarth@gmail.com \ --cc=thierry.reding@gmail.com \ --cc=thomas.petazzoni@bootlin.com \ --cc=u.kleine-koenig@pengutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.