From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Support Opensource <support.opensource@diasemi.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] dt-bindings: regulator: dlg,da9210: Convert to json-schema
Date: Mon, 23 Oct 2023 11:04:45 +0200 [thread overview]
Message-ID: <bfd1cf9d620a8229f5a5e62e6fe9e59c153d0830.1698051619.git.geert+renesas@glider.be> (raw)
Convert the Dialog Semiconductor DA9210 Multi-Phase 12A DC-DC Buck
Converter Device Tree binding documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
.../devicetree/bindings/regulator/da9210.txt | 29 -----------
.../bindings/regulator/dlg,da9210.yaml | 52 +++++++++++++++++++
2 files changed, 52 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/da9210.txt
create mode 100644 Documentation/devicetree/bindings/regulator/dlg,da9210.yaml
diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt
deleted file mode 100644
index 58065ca9e3b46892..0000000000000000
--- a/Documentation/devicetree/bindings/regulator/da9210.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Dialog Semiconductor DA9210 Multi-phase 12A DCDC BUCK Converter
-
-Required properties:
-
-- compatible: must be "dlg,da9210"
-- reg: the i2c slave address of the regulator. It should be 0x68.
-
-Optional properties:
-
-- interrupts: a reference to the DA9210 interrupt, if available.
-
-Any standard regulator properties can be used to configure the single da9210
-DCDC.
-
-Example:
-
- da9210@68 {
- compatible = "dlg,da9210";
- reg = <0x68>;
-
- interrupt-parent = <...>;
- interrupts = <...>;
-
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <1600000>;
- regulator-max-microamp = <4600000>;
- regulator-boot-on;
- };
diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9210.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9210.yaml
new file mode 100644
index 0000000000000000..81f23de36de4c2f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9210.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/dlg,da9210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9210 Multi-Phase 12A DC-DC Buck Converter
+
+maintainers:
+ - Support Opensource <support.opensource@diasemi.com>
+
+allOf:
+ - $ref: regulator.yaml#
+
+properties:
+ compatible:
+ const: dlg,da9210
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@68 {
+ compatible = "dlg,da9210";
+ reg = <0x68>;
+
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <1600000>;
+ regulator-max-microamp = <4600000>;
+ regulator-boot-on;
+ };
+ };
--
2.34.1
next reply other threads:[~2023-10-23 11:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-23 9:04 Geert Uytterhoeven [this message]
2023-10-23 16:18 ` [PATCH] dt-bindings: regulator: dlg,da9210: Convert to json-schema Conor Dooley
2023-10-23 17:58 ` Geert Uytterhoeven
2023-10-24 16:33 ` Conor Dooley
[not found] ` <51a56a92254444d094b446c30637da71@AM7PR10MB3685.EURPRD10.PROD.OUTLOOK.COM>
2023-11-01 10:51 ` DLG Adam Ward
2023-10-24 19:10 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bfd1cf9d620a8229f5a5e62e6fe9e59c153d0830.1698051619.git.geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.