From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH v3 0/2] arm64: dts: renesas: r8a779g0: Add remaining (H)SCIF nodes Date: Fri, 21 Oct 2022 16:13:03 +0200 [thread overview] Message-ID: <cover.1666361314.git.geert+renesas@glider.be> (raw) Hi all, This patch series adds devices nodes for the remaining Serial and High Speed Serial Communication Interfaces with FIFO ((H)SCIF) on the Renesas R-Car V4H (R8A779G0) SoC. Changes compared to v2[1]: - Correct SCIF register block size. Changes compared to v1[2]: - Replace S0D3_PER by SASYNCPERD1, as per R-Car V4H Hardware User's Manual rev. 0.54. SCIF[134] and HSCIF[13] can be accessed on expansion connectors on the White Hawk BreatOut Board using DT overlays available from [3]. They have been tested with a logic analyzer (to verify clocking) and with external loopback. I plan to queues this series in renesas-devel for v6.2. Thanks for your comments! [1] https://lore.kernel.org/r/cover.1665156023.git.geert+renesas@glider.be [2] https://lore.kernel.org/r/cover.1665065132.git.geert+renesas@glider.be [3] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/renesas-overlays Geert Uytterhoeven (2): arm64: dts: renesas: r8a779g0: Add SCIF nodes arm64: dts: renesas: r8a779g0: Add remaining HSCIF nodes arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 124 +++++++++++++++++++++- 1 file changed, 121 insertions(+), 3 deletions(-) -- 2.25.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH v3 0/2] arm64: dts: renesas: r8a779g0: Add remaining (H)SCIF nodes Date: Fri, 21 Oct 2022 16:13:03 +0200 [thread overview] Message-ID: <cover.1666361314.git.geert+renesas@glider.be> (raw) Hi all, This patch series adds devices nodes for the remaining Serial and High Speed Serial Communication Interfaces with FIFO ((H)SCIF) on the Renesas R-Car V4H (R8A779G0) SoC. Changes compared to v2[1]: - Correct SCIF register block size. Changes compared to v1[2]: - Replace S0D3_PER by SASYNCPERD1, as per R-Car V4H Hardware User's Manual rev. 0.54. SCIF[134] and HSCIF[13] can be accessed on expansion connectors on the White Hawk BreatOut Board using DT overlays available from [3]. They have been tested with a logic analyzer (to verify clocking) and with external loopback. I plan to queues this series in renesas-devel for v6.2. Thanks for your comments! [1] https://lore.kernel.org/r/cover.1665156023.git.geert+renesas@glider.be [2] https://lore.kernel.org/r/cover.1665065132.git.geert+renesas@glider.be [3] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/renesas-overlays Geert Uytterhoeven (2): arm64: dts: renesas: r8a779g0: Add SCIF nodes arm64: dts: renesas: r8a779g0: Add remaining HSCIF nodes arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 124 +++++++++++++++++++++- 1 file changed, 121 insertions(+), 3 deletions(-) -- 2.25.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-10-21 14:13 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-10-21 14:13 Geert Uytterhoeven [this message] 2022-10-21 14:13 ` [PATCH v3 0/2] arm64: dts: renesas: r8a779g0: Add remaining (H)SCIF nodes Geert Uytterhoeven 2022-10-21 14:13 ` [PATCH v3 1/2] arm64: dts: renesas: r8a779g0: Add SCIF nodes Geert Uytterhoeven 2022-10-21 14:13 ` Geert Uytterhoeven 2022-10-21 22:46 ` Wolfram Sang 2022-10-21 22:46 ` Wolfram Sang 2022-10-21 14:13 ` [PATCH v3 2/2] arm64: dts: renesas: r8a779g0: Add remaining HSCIF nodes Geert Uytterhoeven 2022-10-21 14:13 ` Geert Uytterhoeven 2022-10-21 22:48 ` Wolfram Sang 2022-10-21 22:48 ` Wolfram Sang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cover.1666361314.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.