From: Maxime Ripard <maxime.ripard@bootlin.com> To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Sean Paul <seanpaul@chromium.org>, Maxime Ripard <maxime.ripard@bootlin.com> Cc: bbrezillon@kernel.org, dri-devel@lists.freedesktop.org, Paul Kocialkowski <paul.kocialkowski@bootlin.com>, Chen-Yu Tsai <wens@csie.org>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Jagan Teki <jagan@openedev.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 7/9] drm/sun4i: dsi: Rework a bit the hblk calculation Date: Fri, 8 Feb 2019 10:53:20 +0100 [thread overview] Message-ID: <d79a21b09847579ce907212a59737af21a729dd0.1549619502.git-series.maxime.ripard@bootlin.com> (raw) In-Reply-To: <cover.23dbbc9b943ff8f36253ac7c617e2eda142b1b69.1549619502.git-series.maxime.ripard@bootlin.com> It turns out that the hblk calculation actually follows a similar pattern than the other packets. Rework a bit the calculation and add a comment. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 8e6392831e9d..e0288e7dc64e 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -488,9 +488,13 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD); /* - * hblk seems to be the line + porches length. + * The blanking is set using a sync event (4 bytes) and a + * blanking packet (4 bytes + payload + 2 bytes). Its minimal + * size is therefore 10 bytes. */ - hblk = mode->htotal * Bpp - hsa; +#define HBLK_PACKET_OVERHEAD 10 + hblk = max((unsigned int)HBLK_PACKET_OVERHEAD, + (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp - HBLK_PACKET_OVERHEAD); /* * And I'm not entirely sure what vblk is about. The driver in -- git-series 0.9.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Ripard <maxime.ripard@bootlin.com> To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Sean Paul <seanpaul@chromium.org>, Maxime Ripard <maxime.ripard@bootlin.com> Cc: bbrezillon@kernel.org, dri-devel@lists.freedesktop.org, Paul Kocialkowski <paul.kocialkowski@bootlin.com>, Chen-Yu Tsai <wens@csie.org>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Jagan Teki <jagan@openedev.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 7/9] drm/sun4i: dsi: Rework a bit the hblk calculation Date: Fri, 8 Feb 2019 10:53:20 +0100 [thread overview] Message-ID: <d79a21b09847579ce907212a59737af21a729dd0.1549619502.git-series.maxime.ripard@bootlin.com> (raw) In-Reply-To: <cover.23dbbc9b943ff8f36253ac7c617e2eda142b1b69.1549619502.git-series.maxime.ripard@bootlin.com> It turns out that the hblk calculation actually follows a similar pattern than the other packets. Rework a bit the calculation and add a comment. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 8e6392831e9d..e0288e7dc64e 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -488,9 +488,13 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD); /* - * hblk seems to be the line + porches length. + * The blanking is set using a sync event (4 bytes) and a + * blanking packet (4 bytes + payload + 2 bytes). Its minimal + * size is therefore 10 bytes. */ - hblk = mode->htotal * Bpp - hsa; +#define HBLK_PACKET_OVERHEAD 10 + hblk = max((unsigned int)HBLK_PACKET_OVERHEAD, + (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp - HBLK_PACKET_OVERHEAD); /* * And I'm not entirely sure what vblk is about. The driver in -- git-series 0.9.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-02-08 9:54 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-02-08 9:53 [PATCH v2 0/9] drm/sun4i: dsi: Add burst mode support Maxime Ripard 2019-02-08 9:53 ` Maxime Ripard 2019-02-08 9:53 ` [PATCH v2 1/9] fixup! ARM: dts: sun8i-a33: bridgemate: Enable display support Maxime Ripard 2019-02-08 9:53 ` Maxime Ripard 2019-02-08 9:57 ` Maxime Ripard 2019-02-08 9:57 ` Maxime Ripard 2019-02-08 9:53 ` [PATCH v2 2/9] drm/sun4i: dsi: Restrict DSI tcon clock divider Maxime Ripard 2019-02-08 9:53 ` Maxime Ripard 2019-02-08 9:53 ` [PATCH v2 3/9] drm/sun4i: dsi: Change the start delay calculation Maxime Ripard 2019-02-08 9:53 ` Maxime Ripard 2019-03-07 17:54 ` Jagan Teki 2019-03-07 17:54 ` Jagan Teki 2019-03-11 14:12 ` Maxime Ripard 2019-03-11 14:12 ` Maxime Ripard 2019-03-11 14:37 ` Jagan Teki 2019-03-11 14:37 ` Jagan Teki 2019-03-19 10:18 ` Maxime Ripard 2019-03-19 10:18 ` Maxime Ripard 2019-02-08 9:53 ` [PATCH v2 4/9] drm/sun4i: dsi: Enforce boundaries on the start delay Maxime Ripard 2019-02-08 9:53 ` Maxime Ripard 2019-02-08 9:53 ` [PATCH v2 5/9] drm/sun4i: dsi: Fix front vs back porch calculation Maxime Ripard 2019-02-08 9:53 ` Maxime Ripard 2019-02-08 9:53 ` [PATCH v2 6/9] drm/sun4i: dsi: Fix DRQ calculation Maxime Ripard 2019-02-08 9:53 ` Maxime Ripard 2019-02-08 9:53 ` Maxime Ripard [this message] 2019-02-08 9:53 ` [PATCH v2 7/9] drm/sun4i: dsi: Rework a bit the hblk calculation Maxime Ripard 2019-02-08 9:53 ` [PATCH v2 8/9] drm/sun4i: dsi: Add burst support Maxime Ripard 2019-02-08 9:53 ` Maxime Ripard 2019-02-08 9:53 ` [PATCH v2 9/9] drm/panel: Add Ronbo RB070D30 panel Maxime Ripard 2019-02-08 9:53 ` Maxime Ripard 2019-02-08 12:24 ` Konstantin Sudakov 2019-02-08 12:24 ` Konstantin Sudakov 2019-02-11 14:40 ` Maxime Ripard 2019-02-11 14:40 ` Maxime Ripard 2019-02-08 18:21 ` Sam Ravnborg 2019-02-08 18:21 ` Sam Ravnborg
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=d79a21b09847579ce907212a59737af21a729dd0.1549619502.git-series.maxime.ripard@bootlin.com \ --to=maxime.ripard@bootlin.com \ --cc=bbrezillon@kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jagan@openedev.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=maarten.lankhorst@linux.intel.com \ --cc=paul.kocialkowski@bootlin.com \ --cc=seanpaul@chromium.org \ --cc=thomas.petazzoni@bootlin.com \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.