RCU Archive on lore.kernel.org
 help / color / Atom feed
From: "Paul E. McKenney" <paulmck@kernel.org>
To: rcu@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, kernel-team@fb.com,
	mingo@kernel.org, jiangshanlai@gmail.com, dipankar@in.ibm.com,
	akpm@linux-foundation.org, mathieu.desnoyers@efficios.com,
	josh@joshtriplett.org, tglx@linutronix.de, peterz@infradead.org,
	rostedt@goodmis.org, dhowells@redhat.com, edumazet@google.com,
	fweisbec@gmail.com, oleg@redhat.com, joel@joelfernandes.org
Subject: [PATCH RFC v2 tip/core/rcu 0/22] Prototype RCU usable from idle, exception, offline
Date: Wed, 18 Mar 2020 17:10:24 -0700
Message-ID: <20200319001024.GA28798@paulmck-ThinkPad-P72> (raw)
In-Reply-To: <20200312181618.GA21271@paulmck-ThinkPad-P72>

Hello!

This series provides two variants of Tasks RCU, a rude variant inspired
by Steven Rostedt's use of schedule_on_each_cpu(), and a tracing variant
requested by the BPF folks and perhaps also of use for other tracing
use cases.

The rude variant uses context switches and offline as its quiescent
states, so that preempt-disabled regions of code executing on online
CPUs form the tasks rude RCU readers.

The tracing variant has explicit read-side markers to permit finite grace
periods even given in-kernel loops in PREEMPT=n builds.  These markers
are rcu_read_lock_trace() and rcu_read_unlock_trace(), so that any code
not under rcu_read_lock_trace() is a quiescent state.  This variant
also protects marked code in the idle loop, on exception entry/exit
paths, and on the various CPU-hotplug online/offline code paths, thus
having protection properties similar to SRCU.  However, unlike SRCU,
this variant avoids expensive instructions in the read-side primitives,
thus having read-side overhead similar to that of preemptible RCU.

There are of course downsides.  The grace-period code can send IPIs to
CPUs, even when those CPUs are in the idle loop or in nohz_full userspace.
However, this version enlists the aid of the context-switch hooks,
which eliminates the need for IPIs in context-switch-heavy workloads.
It also prohibits sending of IPIs early in the grace period, which
provides additional opportunity for the hooks to do their job.  Additional
IPI-reduction mechanisms are under development.

It is also necessary to scan the full tasklist, much as for Tasks RCU.
There is a single callback queue guarded by a single lock, again, much
as for Tasks RCU.  If needed, these downsides can be at least partially
remedied.

Perhaps most important, this variant of RCU does not affect the vanilla
flavors, rcu_preempt and rcu_sched.  The fact that RCU Tasks Trace
readers can operate from idle, offline, and exception entry/exit in no
way allows rcu_preempt and rcu_sched readers to also do so.

The RCU tasks trace mechanism is based off of RCU tasks rather than
SRCU because the latter is more complex and also because the latter
uses a CPU-by-CPU approach to tracking quiescent states instead of the
task-by-task approach that is needed.  It is in theory possible to
mash RCU tasks trace into the Tree SRCU implementation, but there
will need to be extremely good reasons for doing so.

This effort benefited greatly from off-list discussions of BPF
requirements with Alexei Starovoitov and Andrii Nakryiko, as well as from
numerous on-list discussions, at least some of which are captured in the
"Link:" tags on the patches themselves.

The patches in this series are as follows, with asterisks indicating
significant change from v1:

1*.	Add function to sample state of a locked-down task.  I would
	still guess that the API is still subject to change.  ;-)

2*.	Use the above function to add per-task state to RCU CPU stall
	warnings.  This commit was adapted to the new API.

3.	Add rcutorture module parameter to produce non-busy-wait task
	stalls, thus allowing the above RCU CPU stall change to be
	exercised.

4.	Move Tasks RCU to its own file.

5.	Create struct to hold RCU-tasks state information.

6.	Reinstate synchronize_rcu_mult(), as there will likely once
	again be a need to wait on multiple flavors of RCU.

7.	Add an rcutorture test for synchronize_rcu_mult().

8.	Refactor RCU-tasks to allow variants to be added.

9.	Add an RCU-tasks rude variant, based on Steven Rostedt's
	use of schedule_on_each_cpu().

10.	Add torture tests for RCU Tasks Rude.

11.	Use unique names for RCU-Tasks kthreads and messages.

12.	Further refactor RCU-tasks to allow adding even more variants.

13.	Code movement to allow even more Tasks RCU variants.

14*.	Add an RCU Tasks Trace to simplify protection of tracing hooks,
	including BPF.  This version fixes a number of bugs and adapts
	to the new lockdown-task API.

15.	Add torture tests for RCU Tasks Trace.

16.	Add stall warnings for RCU Tasks Trace.

17*.	Move #ifdef into tasks.h to ease addition of Kconfig-dependent APIs.

18*.	Add RCU-tasks-specific information to rcutorture writer stall
	output, easing debugging of these RCU variants.

19*.	Make the above rcutorture writer stall output include
	grace-period state.

20*.	Cause RCU tasks trace to take advantage of RCU scheduler hooks,
	thus reducing the number of IPIs.

21*.	Record grace-period start time for RCU tasks variants for
	IPI throttling and for debugging.

22*.	Provide a kernel boot parameter to delay IPIs until a given grace
	period reaches the specified age, with this age defaulting to
	half a second, further reducing the number of IPIs.  To zero on
	context-switch-heavy workloads.

These new versions of Tasks RCU now pass heavy rcutorture testing,
and should thus be fine for experimental use.

Changes since v1:

o	Updated this cover letter to provide more detail, including
	on roads not taken.

o	Updated commit logs based on feedback from v1.

o	Updated the function providing a consistent view of the
	specified non-running task's state to invoke the specified
	function even if the task is currently running.  This will
	be necessary to safely eliminate IPIs for long-term idle and
	userspace execution.  The function may also now return false
	to transmit a failure indication to the caller, for example,
	if the function cannot handle being invoked on a running CPU.
	The function is now passed the relevant task_struct pointer as
	well as the specified argument.

	Changes were of course made to use the new API.

o	Leveraged context-switch hooks to avoid unnecessary IPIs.

o	Held off IPIs for the first half second (by default) of each
	grace period to give the context-switch hooks a better chance
	to do their job.

o	Lots of testing.

o	Fixed a number of bugs.

Todo:

o	Leverage idle entry/exit hooks to reduce IPIing of idle tasks.

o	Switch to read-side memory barriers during idle and userspace
	execution in kernels built for real-time or battery-powered use.
	As currently planned, nohz_full CPUs would be IPIed only during
	long-running loops in the kernel (as in more than half a second
	of such execution by default).

	Although this does add a branch to rcu_read_lock_trace() in
	kernels built to take this approach, the check involves only
	a cache-hot byte.  However, rcu_read_unlock_trace() executes
	the same sequence of instructions as before in the case where
	no memory barrier is required even in kernels built to take
	this approach.

o	Context-switch hooks and delayed IPIs could potentially also be
	applied to reduce the IPI intensity of RCU-tasks rude, but I do
	not yet know of any reason to do this.  If you believe that this
	is needed, please let me know.

o	Lots more testing.

							Thanx, Paul

------------------------------------------------------------------------

 Documentation/admin-guide/kernel-parameters.txt             |   12 
 include/linux/rcupdate.h                                    |   48 
 include/linux/rcupdate_trace.h                              |   84 
 include/linux/rcupdate_wait.h                               |   19 
 include/linux/rcutiny.h                                     |    2 
 include/linux/sched.h                                       |    8 
 include/linux/wait.h                                        |    2 
 init/init_task.c                                            |    4 
 kernel/fork.c                                               |    4 
 kernel/rcu/Kconfig                                          |   34 
 kernel/rcu/Kconfig.debug                                    |    4 
 kernel/rcu/rcu.h                                            |    3 
 kernel/rcu/rcutorture.c                                     |   99 
 kernel/rcu/tasks.h                                          | 1925 +++++++++---
 kernel/rcu/tree_plugin.h                                    |    6 
 kernel/rcu/tree_stall.h                                     |   40 
 kernel/rcu/update.c                                         |  374 --
 kernel/sched/core.c                                         |   48 
 tools/testing/selftests/rcutorture/configs/rcu/CFLIST       |    2 
 tools/testing/selftests/rcutorture/configs/rcu/RUDE01       |   10 
 tools/testing/selftests/rcutorture/configs/rcu/RUDE01.boot  |    1 
 tools/testing/selftests/rcutorture/configs/rcu/TRACE01      |   10 
 tools/testing/selftests/rcutorture/configs/rcu/TRACE01.boot |    1 
 23 files changed, 1926 insertions(+), 814 deletions(-)

  parent reply index

Thread overview: 171+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-12 18:16 [PATCH RFC tip/core/rcu 0/16] " Paul E. McKenney
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 01/16] sched/core: Add function to sample state of non-running function paulmck
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 02/16] rcu: Add per-task state to RCU CPU stall warnings paulmck
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 03/16] rcutorture: Add flag to produce non-busy-wait task stalls paulmck
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 04/16] rcu-tasks: Move Tasks RCU to its own file paulmck
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 05/16] rcu-tasks: Create struct to hold state information paulmck
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 06/16] rcu: Reinstate synchronize_rcu_mult() paulmck
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 07/16] rcutorture: Add a test for synchronize_rcu_mult() paulmck
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 08/16] rcu-tasks: Refactor RCU-tasks to allow variants to be added paulmck
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 09/16] rcu-tasks: Add an RCU-tasks rude variant paulmck
2020-03-16 19:47   ` Joel Fernandes
2020-03-16 20:17     ` Joel Fernandes
2020-03-16 20:32       ` Paul E. McKenney
2020-03-16 21:32         ` Steven Rostedt
2020-03-16 21:45           ` Joel Fernandes
2020-03-16 22:03             ` Steven Rostedt
2020-03-16 22:11               ` Paul E. McKenney
2020-05-10  9:59               ` Lai Jiangshan
2020-05-10 15:49                 ` Paul E. McKenney
2020-05-11  0:06                   ` Lai Jiangshan
2020-05-11  2:44                     ` Paul E. McKenney
2020-05-11  0:44                 ` Masami Hiramatsu
2020-05-11 16:07                 ` Steven Rostedt
2020-05-11 19:48                 ` Steven Rostedt
2020-03-16 20:29     ` Paul E. McKenney
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 10/16] rcutorture: Add torture tests for RCU Tasks Rude paulmck
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 11/16] rcu-tasks: Use unique names for RCU-Tasks kthreads and messages paulmck
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 12/16] rcu-tasks: Further refactor RCU-tasks to allow adding more variants paulmck
2020-03-12 18:16 ` [PATCH RFC tip/core/rcu 13/16] rcu-tasks: Code movement to allow more Tasks RCU variants paulmck
2020-03-12 18:17 ` [PATCH RFC tip/core/rcu 14/16] rcu: Add an RCU Tasks Trace to simplify protection of tracing hooks paulmck
2020-03-12 18:17 ` [PATCH RFC tip/core/rcu 15/16] rcutorture: Add torture tests for RCU Tasks Trace paulmck
2020-03-12 18:17 ` [PATCH RFC tip/core/rcu 16/16] rcu-tasks: Add stall warnings " paulmck
2020-03-13 14:41 ` [PATCH RFC tip/core/rcu 0/16] Prototype RCU usable from idle, exception, offline Frederic Weisbecker
2020-03-13 15:42   ` Paul E. McKenney
2020-03-15 17:45     ` Mathieu Desnoyers
2020-03-15 17:59       ` Paul E. McKenney
2020-03-16 18:36         ` Steven Rostedt
2020-03-16 18:52           ` Paul E. McKenney
2020-03-16 14:45     ` Frederic Weisbecker
2020-03-16 15:39       ` Paul E. McKenney
2020-03-19  0:10 ` Paul E. McKenney [this message]
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 01/22] sched/core: Add function to sample state of locked-down task paulmck
2020-03-19 17:22     ` Steven Rostedt
2020-03-19 17:35       ` Paul E. McKenney
2020-03-20  2:49         ` Paul E. McKenney
2020-03-20  3:09           ` Steven Rostedt
2020-03-20 16:27             ` Paul E. McKenney
2020-03-24  0:06           ` Joel Fernandes
2020-03-24  0:15             ` Joel Fernandes
2020-03-24 16:26               ` Paul E. McKenney
2020-03-24 15:48             ` Paul E. McKenney
2020-03-24 16:52               ` Joel Fernandes
2020-03-24 17:20                 ` Paul E. McKenney
2020-03-24 18:19                   ` Joel Fernandes
2020-03-25  0:58                     ` Paul E. McKenney
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 02/22] rcu: Add per-task state to RCU CPU stall warnings paulmck
2020-03-19 17:27     ` Steven Rostedt
2020-03-19 17:41       ` Paul E. McKenney
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 03/22] rcutorture: Add flag to produce non-busy-wait task stalls paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 04/22] rcu-tasks: Move Tasks RCU to its own file paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 05/22] rcu-tasks: Create struct to hold state information paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 06/22] rcu: Reinstate synchronize_rcu_mult() paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 07/22] rcutorture: Add a test for synchronize_rcu_mult() paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 08/22] rcu-tasks: Refactor RCU-tasks to allow variants to be added paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 09/22] rcu-tasks: Add an RCU-tasks rude variant paulmck
2020-03-19 19:04     ` Steven Rostedt
2020-03-19 23:58       ` Paul E. McKenney
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 10/22] rcutorture: Add torture tests for RCU Tasks Rude paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 11/22] rcu-tasks: Use unique names for RCU-Tasks kthreads and messages paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 12/22] rcu-tasks: Further refactor RCU-tasks to allow adding more variants paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 13/22] rcu-tasks: Code movement to allow more Tasks RCU variants paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 14/22] rcu-tasks: Add an RCU Tasks Trace to simplify protection of tracing hooks paulmck
2020-03-19  1:37     ` Joel Fernandes
2020-03-19  1:58       ` Joel Fernandes
2020-03-19  3:40         ` Paul E. McKenney
2020-03-19 19:42     ` Steven Rostedt
2020-03-20  0:28       ` Paul E. McKenney
2020-03-20  0:48         ` Steven Rostedt
2020-03-20  2:41           ` Paul E. McKenney
2020-03-28 14:06             ` Joel Fernandes
2020-03-28 15:34               ` Paul E. McKenney
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 15/22] rcutorture: Add torture tests for RCU Tasks Trace paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 16/22] rcu-tasks: Add stall warnings " paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 17/22] rcu-tasks: Move #ifdef into tasks.h paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 18/22] rcu-tasks: Add RCU tasks to rcutorture writer stall output paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 19/22] rcu-tasks: Make rcutorture writer stall output include GP state paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 20/22] rcu-tasks: Make RCU Tasks Trace make use of RCU scheduler hooks paulmck
2020-03-19  0:10   ` [PATCH RFC v2 tip/core/rcu 21/22] rcu-tasks: Add a grace-period start time for throttling and debug paulmck
2020-03-19  0:11   ` [PATCH RFC v2 tip/core/rcu 22/22] rcu-tasks: Provide boot parameter to delay IPIs until late in grace period paulmck
2020-03-19 11:31   ` [PATCH RFC v2 tip/core/rcu 0/22] Prototype RCU usable from idle, exception, offline Mathieu Desnoyers
2020-03-19 13:13     ` Paul E. McKenney
     [not found]   ` <20200319104614.11444-1-hdanton@sina.com>
2020-03-19 12:38     ` [PATCH RFC v2 tip/core/rcu 03/22] rcutorture: Add flag to produce non-busy-wait task stalls Paul E. McKenney
     [not found]     ` <20200319133947.12172-1-hdanton@sina.com>
2020-03-19 15:22       ` Paul E. McKenney
     [not found]       ` <20200320040329.9840-1-hdanton@sina.com>
2020-03-20 16:11         ` Paul E. McKenney
     [not found]   ` <20200320071228.9740-1-hdanton@sina.com>
2020-03-20 19:14     ` [PATCH RFC v2 tip/core/rcu 04/22] rcu-tasks: Move Tasks RCU to its own file Paul E. McKenney
2020-03-27 22:23   ` [PATCH RFC v3 tip/core/rcu 0/34] Prototype RCU usable from idle, exception, offline Paul E. McKenney
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 01/34] sched/core: Add function to sample state of locked-down task paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 02/34] rcu: Add per-task state to RCU CPU stall warnings paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 03/34] rcutorture: Add flag to produce non-busy-wait task stalls paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 04/34] rcu-tasks: Move Tasks RCU to its own file paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 05/34] rcu-tasks: Create struct to hold state information paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 06/34] rcu: Reinstate synchronize_rcu_mult() paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 07/34] rcutorture: Add a test for synchronize_rcu_mult() paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 08/34] rcu-tasks: Refactor RCU-tasks to allow variants to be added paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 09/34] rcu-tasks: Add an RCU-tasks rude variant paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 10/34] rcutorture: Add torture tests for RCU Tasks Rude paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 11/34] rcu-tasks: Use unique names for RCU-Tasks kthreads and messages paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 12/34] rcu-tasks: Further refactor RCU-tasks to allow adding more variants paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 13/34] rcu-tasks: Code movement to allow more Tasks RCU variants paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 14/34] rcu-tasks: Add an RCU Tasks Trace to simplify protection of tracing hooks paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 15/34] rcutorture: Add torture tests for RCU Tasks Trace paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 16/34] rcu-tasks: Add stall warnings " paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 17/34] rcu-tasks: Move #ifdef into tasks.h paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 18/34] rcu-tasks: Add RCU tasks to rcutorture writer stall output paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 19/34] rcu-tasks: Make rcutorture writer stall output include GP state paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 20/34] rcu-tasks: Make RCU Tasks Trace make use of RCU scheduler hooks paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 21/34] rcu-tasks: Add a grace-period start time for throttling and debug paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 22/34] rcu-tasks: Provide boot parameter to delay IPIs until late in grace period paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 23/34] rcu-tasks: Split ->trc_reader_need_end paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 24/34] rcu-tasks: Add grace-period and IPI counts to statistics paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 25/34] rcu-tasks: Add Kconfig option to mediate smp_mb() vs. IPI paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 26/34] rcu-tasks: Avoid IPIing userspace/idle tasks if kernel is so built paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 27/34] rcu-tasks: Allow rcu_read_unlock_trace() under scheduler locks paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 28/34] rcu-tasks: Disable CPU hotplug across RCU tasks trace scans paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 29/34] rcu-tasks: Handle the running-offline idle-task special case paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 30/34] rcu-tasks: Make RCU tasks trace also wait for idle tasks paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 31/34] rcu-tasks: Add rcu_dynticks_zero_in_eqs() effectiveness statistics paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 32/34] rcu-tasks: Add count for idle tasks on offline CPUs paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 33/34] rcutorture: Add TRACE02 scenario enabling RCU Tasks Trace IPIs paulmck
2020-03-27 22:24     ` [PATCH v3 tip/core/rcu 34/34] rcu-tasks: Add IPI failure count to statistics paulmck
2020-04-15 18:18     ` [PATCH v4 tip/core/rcu 0/38] Prototype RCU usable from idle, exception, offline Paul E. McKenney
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 01/38] rcu: Add comments marking transitions between RCU watching and not paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 02/38] rcu-tasks: Use context-switch hook for PREEMPT=y kernels paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 03/38] sched/core: Add function to sample state of locked-down task paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 04/38] rcu: Add per-task state to RCU CPU stall warnings paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 05/38] rcu-tasks: Move Tasks RCU to its own file paulmck
2020-05-10  7:42         ` Lai Jiangshan
2020-05-10 15:39           ` Paul E. McKenney
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 06/38] rcu-tasks: Create struct to hold state information paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 07/38] rcu: Reinstate synchronize_rcu_mult() paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 08/38] rcutorture: Add a test for synchronize_rcu_mult() paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 09/38] rcu-tasks: Refactor RCU-tasks to allow variants to be added paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 10/38] rcu-tasks: Add an RCU-tasks rude variant paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 11/38] rcutorture: Add torture tests for RCU Tasks Rude paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 12/38] rcu-tasks: Use unique names for RCU-Tasks kthreads and messages paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 13/38] rcu-tasks: Further refactor RCU-tasks to allow adding more variants paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 14/38] rcu-tasks: Code movement to allow more Tasks RCU variants paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 15/38] rcu-tasks: Add an RCU Tasks Trace to simplify protection of tracing hooks paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 16/38] rcutorture: Add torture tests for RCU Tasks Trace paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 17/38] rcu-tasks: Add stall warnings " paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 18/38] rcu-tasks: Move #ifdef into tasks.h paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 19/38] rcu-tasks: Add RCU tasks to rcutorture writer stall output paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 20/38] rcu-tasks: Make rcutorture writer stall output include GP state paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 21/38] rcu-tasks: Make RCU Tasks Trace make use of RCU scheduler hooks paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 22/38] rcu-tasks: Add a grace-period start time for throttling and debug paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 23/38] rcu-tasks: Provide boot parameter to delay IPIs until late in grace period paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 24/38] rcu-tasks: Split ->trc_reader_need_end paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 25/38] rcu-tasks: Add grace-period and IPI counts to statistics paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 26/38] rcu-tasks: Add Kconfig option to mediate smp_mb() vs. IPI paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 27/38] rcu-tasks: Avoid IPIing userspace/idle tasks if kernel is so built paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 28/38] rcu-tasks: Allow rcu_read_unlock_trace() under scheduler locks paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 29/38] rcu-tasks: Disable CPU hotplug across RCU tasks trace scans paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 30/38] rcu-tasks: Handle the running-offline idle-task special case paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 31/38] rcu-tasks: Make RCU tasks trace also wait for idle tasks paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 32/38] rcu-tasks: Add rcu_dynticks_zero_in_eqs() effectiveness statistics paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 33/38] rcu-tasks: Add count for idle tasks on offline CPUs paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 34/38] rcutorture: Add TRACE02 scenario enabling RCU Tasks Trace IPIs paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 35/38] rcu-tasks: Add IPI failure count to statistics paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 36/38] rcu-tasks: Allow standalone use of TASKS_{TRACE_,}RCU paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 37/38] ftrace: Use synchronize_rcu_tasks_rude() instead of ftrace_sync() paulmck
2020-04-15 18:19       ` [PATCH v4 tip/core/rcu 38/38] rcu: Don't acquire lock in NMI handler in rcu_nmi_enter_common() paulmck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200319001024.GA28798@paulmck-ThinkPad-P72 \
    --to=paulmck@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=dhowells@redhat.com \
    --cc=dipankar@in.ibm.com \
    --cc=edumazet@google.com \
    --cc=fweisbec@gmail.com \
    --cc=jiangshanlai@gmail.com \
    --cc=joel@joelfernandes.org \
    --cc=josh@joshtriplett.org \
    --cc=kernel-team@fb.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mathieu.desnoyers@efficios.com \
    --cc=mingo@kernel.org \
    --cc=oleg@redhat.com \
    --cc=peterz@infradead.org \
    --cc=rcu@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

RCU Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/rcu/0 rcu/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 rcu rcu/ https://lore.kernel.org/rcu \
		rcu@vger.kernel.org
	public-inbox-index rcu

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.rcu


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git