From: Byungchul Park <max.byungchul.park@gmail.com>
To: Byungchul Park <byungchul.park@lge.com>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>,
Joel Fernandes <joel@joelfernandes.org>,
josh@joshtriplett.org, Steven Rostedt <rostedt@goodmis.org>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
jiangshanlai@gmail.com, rcu@vger.kernel.org,
linux-kernel@vger.kernel.org, kernel-team@lge.com
Subject: Re: [PATCH] rcu: Make jiffies_till_sched_qs writable
Date: Sat, 13 Jul 2019 18:08:11 +0900 [thread overview]
Message-ID: <CANrsvRNWHD6EM3Jska2S6iqpUyqZdQzW8HsmRFb7uxdUzP9WVg@mail.gmail.com> (raw)
In-Reply-To: <20190712054828.GA7702@X58A-UD3R>
On Fri, Jul 12, 2019 at 2:50 PM Byungchul Park <byungchul.park@lge.com> wrote:
>
> On Thu, Jul 11, 2019 at 05:30:52AM -0700, Paul E. McKenney wrote:
> > > > If there is a real need, something needs to be provided to meet that
> > > > need. But in the absence of a real need, past experience has shown
> > > > that speculative tuning knobs usually do more harm than good. ;-)
> > >
> > > It makes sense, "A speculative tuning knobs do more harm than good".
> > >
> > > Then, it would be better to leave jiffies_till_{first,next}_fqs tunnable
> > > but jiffies_till_sched_qs until we need it.
> > >
> > > However,
> > >
> > > (1) In case that jiffies_till_sched_qs is tunnable:
> > >
> > > We might need all of jiffies_till_{first,next}_qs,
> > > jiffies_till_sched_qs and jiffies_to_sched_qs because
> > > jiffies_to_sched_qs can be affected by any of them. So we
> > > should be able to read each value at any time.
> > >
> > > (2) In case that jiffies_till_sched_qs is not tunnable:
> > >
> > > I think we don't have to keep the jiffies_till_sched_qs any
> > > longer since that's only for setting jiffies_to_sched_qs at
> > > *booting time*, which can be done with jiffies_to_sched_qs too.
> > > It's meaningless to keep all of tree variables.
> > >
> > > The simpler and less knobs that we really need we have, the better.
> > >
> > > what do you think about it?
> > >
> > > In the following patch, I (1) removed jiffies_till_sched_qs and then
> > > (2) renamed jiffies_*to*_sched_qs to jiffies_*till*_sched_qs because I
> > > think jiffies_till_sched_qs is a much better name for the purpose. I
> > > will resend it with a commit msg after knowing your opinion on it.
>
> Hi Paul,
>
> > I will give you a definite "maybe".
> >
> > Here are the two reasons for changing RCU's embarrassingly large array
> > of tuning parameters:
> >
> > 1. They are causing a problem in production. This would represent a
> > bug that clearly must be fixed. As you say, this change is not
> > in this category.
> >
> > 2. The change simplifies either RCU's code or the process of tuning
> > RCU, but without degrading RCU's ability to run everywhere and
> > without removing debugging tools.
>
> Agree.
>
> > The change below clearly simplifies things by removing a few lines of
> > code, and it does not change RCU's default self-configuration. But are
> > we sure about the debugging aspect? (Please keep in mind that many more
>
> I'm sorry I don't get it. I don't think this patch affect any debugging
> ability. What do you think it hurts? Could you explain it more?
I meant we are able to achieve it by directly changing
rcutree.jiffies_to_sched_qs even for the debugging purpose
w/o changing code itself as well. Thoughts?
--
Thanks,
Byungchul
> > sites are willing to change boot parameters than are willing to patch
> > their kernels.)
>
> Right.
>
> > What do you think?
> >
> > Finally, I urge you to join with Joel Fernandes and go through these
> > grace-period-duration tuning parameters. Once you guys get your heads
> > completely around all of them and how they interact across the different
> > possible RCU configurations, I bet that the two of you will have excellent
> > ideas for improvement.
>
> Great. I'd be happy if I join the improvement and with Joel. I might
> need to ask you exactly what you expect in detail maybe. Anyway I will
> willingly go with it. :)
>
> Thanks,
> Byungchul
>
> > Thanx, Paul
> >
> > > Thanks,
> > > Byungchul
> > >
> > > ---8<---
> > > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> > > index e72c184..94b58f5 100644
> > > --- a/Documentation/admin-guide/kernel-parameters.txt
> > > +++ b/Documentation/admin-guide/kernel-parameters.txt
> > > @@ -3792,10 +3792,6 @@
> > > a value based on the most recent settings
> > > of rcutree.jiffies_till_first_fqs
> > > and rcutree.jiffies_till_next_fqs.
> > > - This calculated value may be viewed in
> > > - rcutree.jiffies_to_sched_qs. Any attempt to set
> > > - rcutree.jiffies_to_sched_qs will be cheerfully
> > > - overwritten.
> > >
> > > rcutree.kthread_prio= [KNL,BOOT]
> > > Set the SCHED_FIFO priority of the RCU per-CPU
> > > diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
> > > index a2f8ba2..ad9dc86 100644
> > > --- a/kernel/rcu/tree.c
> > > +++ b/kernel/rcu/tree.c
> > > @@ -421,10 +421,8 @@ static int rcu_is_cpu_rrupt_from_idle(void)
> > > * How long the grace period must be before we start recruiting
> > > * quiescent-state help from rcu_note_context_switch().
> > > */
> > > -static ulong jiffies_till_sched_qs = ULONG_MAX;
> > > +static ulong jiffies_till_sched_qs = ULONG_MAX; /* See adjust_jiffies_till_sched_qs(). */
> > > module_param(jiffies_till_sched_qs, ulong, 0444);
> > > -static ulong jiffies_to_sched_qs; /* See adjust_jiffies_till_sched_qs(). */
> > > -module_param(jiffies_to_sched_qs, ulong, 0444); /* Display only! */
> > >
> > > /*
> > > * Make sure that we give the grace-period kthread time to detect any
> > > @@ -436,18 +434,13 @@ static void adjust_jiffies_till_sched_qs(void)
> > > {
> > > unsigned long j;
> > >
> > > - /* If jiffies_till_sched_qs was specified, respect the request. */
> > > - if (jiffies_till_sched_qs != ULONG_MAX) {
> > > - WRITE_ONCE(jiffies_to_sched_qs, jiffies_till_sched_qs);
> > > - return;
> > > - }
> > > /* Otherwise, set to third fqs scan, but bound below on large system. */
> > > j = READ_ONCE(jiffies_till_first_fqs) +
> > > 2 * READ_ONCE(jiffies_till_next_fqs);
> > > if (j < HZ / 10 + nr_cpu_ids / RCU_JIFFIES_FQS_DIV)
> > > j = HZ / 10 + nr_cpu_ids / RCU_JIFFIES_FQS_DIV;
> > > pr_info("RCU calculated value of scheduler-enlistment delay is %ld jiffies.\n", j);
> > > - WRITE_ONCE(jiffies_to_sched_qs, j);
> > > + WRITE_ONCE(jiffies_till_sched_qs, j);
> > > }
> > >
> > > static int param_set_first_fqs_jiffies(const char *val, const struct kernel_param *kp)
> > > @@ -1033,16 +1026,16 @@ static int rcu_implicit_dynticks_qs(struct rcu_data *rdp)
> > >
> > > /*
> > > * A CPU running for an extended time within the kernel can
> > > - * delay RCU grace periods: (1) At age jiffies_to_sched_qs,
> > > - * set .rcu_urgent_qs, (2) At age 2*jiffies_to_sched_qs, set
> > > + * delay RCU grace periods: (1) At age jiffies_till_sched_qs,
> > > + * set .rcu_urgent_qs, (2) At age 2*jiffies_till_sched_qs, set
> > > * both .rcu_need_heavy_qs and .rcu_urgent_qs. Note that the
> > > * unsynchronized assignments to the per-CPU rcu_need_heavy_qs
> > > * variable are safe because the assignments are repeated if this
> > > * CPU failed to pass through a quiescent state. This code
> > > - * also checks .jiffies_resched in case jiffies_to_sched_qs
> > > + * also checks .jiffies_resched in case jiffies_till_sched_qs
> > > * is set way high.
> > > */
> > > - jtsq = READ_ONCE(jiffies_to_sched_qs);
> > > + jtsq = READ_ONCE(jiffies_till_sched_qs);
> > > ruqp = per_cpu_ptr(&rcu_data.rcu_urgent_qs, rdp->cpu);
> > > rnhqp = &per_cpu(rcu_data.rcu_need_heavy_qs, rdp->cpu);
> > > if (!READ_ONCE(*rnhqp) &&
> > > @@ -3383,7 +3376,8 @@ static void __init rcu_init_geometry(void)
> > > jiffies_till_first_fqs = d;
> > > if (jiffies_till_next_fqs == ULONG_MAX)
> > > jiffies_till_next_fqs = d;
> > > - adjust_jiffies_till_sched_qs();
> > > + if (jiffies_till_sched_qs == ULONG_MAX)
> > > + adjust_jiffies_till_sched_qs();
> > >
> > > /* If the compile-time values are accurate, just leave. */
> > > if (rcu_fanout_leaf == RCU_FANOUT_LEAF &&
prev parent reply other threads:[~2019-07-13 9:08 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-08 6:00 [PATCH] rcu: Make jiffies_till_sched_qs writable Byungchul Park
2019-07-08 12:50 ` Paul E. McKenney
2019-07-08 13:03 ` Joel Fernandes
2019-07-08 13:19 ` Paul E. McKenney
2019-07-08 14:15 ` Joel Fernandes
2019-07-09 6:05 ` Byungchul Park
2019-07-09 12:43 ` Paul E. McKenney
2019-07-09 5:58 ` Byungchul Park
2019-07-09 6:45 ` Byungchul Park
2019-07-09 12:41 ` Paul E. McKenney
2019-07-10 1:20 ` Byungchul Park
2019-07-11 12:30 ` Paul E. McKenney
2019-07-11 13:08 ` Joel Fernandes
2019-07-11 15:02 ` Paul E. McKenney
2019-07-11 16:48 ` Joel Fernandes
2019-07-11 19:58 ` Joel Fernandes
2019-07-12 6:32 ` Byungchul Park
2019-07-12 12:51 ` Joel Fernandes
2019-07-12 13:02 ` Paul E. McKenney
2019-07-12 13:43 ` Joel Fernandes
2019-07-12 14:53 ` Paul E. McKenney
2019-07-13 8:47 ` Byungchul Park
2019-07-13 14:20 ` Joel Fernandes
2019-07-13 15:13 ` Paul E. McKenney
2019-07-13 15:42 ` Joel Fernandes
2019-07-13 17:41 ` Paul E. McKenney
2019-07-14 13:39 ` Byungchul Park
2019-07-14 13:56 ` Paul E. McKenney
2019-07-15 17:39 ` Joel Fernandes
2019-07-15 20:09 ` Paul E. McKenney
2019-07-18 16:14 ` Joel Fernandes
2019-07-18 16:15 ` Joel Fernandes
2019-07-18 21:34 ` Paul E. McKenney
2019-07-19 0:48 ` Joel Fernandes
2019-07-19 0:54 ` Byungchul Park
2019-07-19 0:39 ` Byungchul Park
2019-07-19 0:52 ` Joel Fernandes
2019-07-19 1:10 ` Byungchul Park
2019-07-19 7:43 ` Paul E. McKenney
2019-07-19 9:57 ` Byungchul Park
2019-07-19 19:57 ` Paul E. McKenney
2019-07-19 20:33 ` Joel Fernandes
2019-07-23 11:05 ` Byungchul Park
2019-07-23 13:47 ` Paul E. McKenney
2019-07-23 16:54 ` Paul E. McKenney
2019-07-24 7:58 ` Byungchul Park
2019-07-24 7:59 ` Byungchul Park
2019-07-12 13:01 ` Paul E. McKenney
2019-07-12 13:40 ` Joel Fernandes
2019-07-12 6:00 ` Byungchul Park
2019-07-12 5:52 ` Byungchul Park
2019-07-12 5:48 ` Byungchul Park
2019-07-13 9:08 ` Byungchul Park [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CANrsvRNWHD6EM3Jska2S6iqpUyqZdQzW8HsmRFb7uxdUzP9WVg@mail.gmail.com \
--to=max.byungchul.park@gmail.com \
--cc=byungchul.park@lge.com \
--cc=jiangshanlai@gmail.com \
--cc=joel@joelfernandes.org \
--cc=josh@joshtriplett.org \
--cc=kernel-team@lge.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=paulmck@linux.ibm.com \
--cc=rcu@vger.kernel.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).