* Bug 215678 - vmwgfx: probe of 0000:00:0f.0 failed with error -16
@ 2022-03-18 7:12 Thorsten Leemhuis
2022-04-11 10:23 ` Bug 215678 - vmwgfx: probe of 0000:00:0f.0 failed with error -16 #forregzbot Thorsten Leemhuis
0 siblings, 1 reply; 2+ messages in thread
From: Thorsten Leemhuis @ 2022-03-18 7:12 UTC (permalink / raw)
To: Zack Rusin; +Cc: regressions, ML dri-devel, VMware Graphics
Hi, this is your Linux kernel regression tracker.
I noticed a regression report in bugzilla.kernel.org that afaics nobody
acted upon since it was reported about a week ago, that's why I decided
to forward it to the lists and a few relevant people to the CC. To quote
from https://bugzilla.kernel.org/show_bug.cgi?id=215678 :
> With latest kernel, i notice this:
>
> dmesg | grep vmwgfx
> [ 2.959200] vmwgfx 0000:00:0f.0: vgaarb: deactivate vga console
> [ 2.959764] vmwgfx 0000:00:0f.0: BAR 1: can't reserve [mem 0xf0000000-0xf7ffffff pref]
> [ 2.959766] vmwgfx: probe of 0000:00:0f.0 failed with error -16
>
>
> lspci -s 0000:00:0f.0 -nnvv
> 00:0f.0 VGA compatible controller [0300]: VMware SVGA II Adapter [15ad:0405] (prog-if 00 [VGA controller])
> Subsystem: VMware SVGA II Adapter [15ad:0405]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 2140 [size=16]
> Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> Region 2: Memory at fb800000 (32-bit, non-prefetchable) [size=8M]
> Expansion ROM at 000c0000 [disabled] [size=128K]
> Capabilities: [40] Vendor Specific Information: Len=00 <?>
> Capabilities: [44] PCI Advanced Features
> AFCap: TP+ FLR+
> AFCtrl: FLR-
> AFStatus: TP-
> Kernel modules: vmwgfx
>
> Driver version:
> #define VMWGFX_DRIVER_DATE "20211206"
>
> Host: Windows 11 & VMware Workstation 16 Pro 16.2.0 build-18760230
> Guest: Debian 11
Could somebody take a look into this? Or was this discussed somewhere
else already? Or even fixed?
Anyway, to get this tracked:
#regzbot introduced: v5.16..v5.17-rc7
#regzbot from: sander44 <ionut_n2001@yahoo.com>
#regzbot title: "vmwgfx: probe of 0000:00:0f.0 failed with error -16" in
guest
#regzbot link: https://bugzilla.kernel.org/show_bug.cgi?id=215678
Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
P.S.: As the Linux kernel's regression tracker I'm getting a lot of
reports on my table. I can only look briefly into most of them and lack
knowledge about most of the areas they concern. I thus unfortunately
will sometimes get things wrong or miss something important. I hope
that's not the case here; if you think it is, don't hesitate to tell me
in a public reply, it's in everyone's interest to set the public record
straight.
--
Additional information about regzbot:
If you want to know more about regzbot, check out its web-interface, the
getting start guide, and the references documentation:
https://linux-regtracking.leemhuis.info/regzbot/
https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md
https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md
The last two documents will explain how you can interact with regzbot
yourself if your want to.
Hint for reporters: when reporting a regression it's in your interest to
CC the regression list and tell regzbot about the issue, as that ensures
the regression makes it onto the radar of the Linux kernel's regression
tracker -- that's in your interest, as it ensures your report won't fall
through the cracks unnoticed.
Hint for developers: you normally don't need to care about regzbot once
it's involved. Fix the issue as you normally would, just remember to
include 'Link:' tag in the patch descriptions pointing to all reports
about the issue. This has been expected from developers even before
regzbot showed up for reasons explained in
'Documentation/process/submitting-patches.rst' and
'Documentation/process/5.Posting.rst'.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Bug 215678 - vmwgfx: probe of 0000:00:0f.0 failed with error -16 #forregzbot
2022-03-18 7:12 Bug 215678 - vmwgfx: probe of 0000:00:0f.0 failed with error -16 Thorsten Leemhuis
@ 2022-04-11 10:23 ` Thorsten Leemhuis
0 siblings, 0 replies; 2+ messages in thread
From: Thorsten Leemhuis @ 2022-04-11 10:23 UTC (permalink / raw)
To: regressions
TWIMC: this mail is primarily send for documentation purposes and for
regzbot, my Linux kernel regression tracking bot. These mails usually
contain '#forregzbot' in the subject, to make them easy to spot and filter.
#regzbot fixed-by: 27599aacbaefcbf2af7b06b0029459bbf682000d
On 18.03.22 08:12, Thorsten Leemhuis wrote:
> Hi, this is your Linux kernel regression tracker.
>
> I noticed a regression report in bugzilla.kernel.org that afaics nobody
> acted upon since it was reported about a week ago, that's why I decided
> to forward it to the lists and a few relevant people to the CC. To quote
> from https://bugzilla.kernel.org/show_bug.cgi?id=215678 :
>
>> With latest kernel, i notice this:
>>
>> dmesg | grep vmwgfx
>> [ 2.959200] vmwgfx 0000:00:0f.0: vgaarb: deactivate vga console
>> [ 2.959764] vmwgfx 0000:00:0f.0: BAR 1: can't reserve [mem 0xf0000000-0xf7ffffff pref]
>> [ 2.959766] vmwgfx: probe of 0000:00:0f.0 failed with error -16
>>
>>
>> lspci -s 0000:00:0f.0 -nnvv
>> 00:0f.0 VGA compatible controller [0300]: VMware SVGA II Adapter [15ad:0405] (prog-if 00 [VGA controller])
>> Subsystem: VMware SVGA II Adapter [15ad:0405]
>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Interrupt: pin A routed to IRQ 16
>> Region 0: I/O ports at 2140 [size=16]
>> Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
>> Region 2: Memory at fb800000 (32-bit, non-prefetchable) [size=8M]
>> Expansion ROM at 000c0000 [disabled] [size=128K]
>> Capabilities: [40] Vendor Specific Information: Len=00 <?>
>> Capabilities: [44] PCI Advanced Features
>> AFCap: TP+ FLR+
>> AFCtrl: FLR-
>> AFStatus: TP-
>> Kernel modules: vmwgfx
>>
>> Driver version:
>> #define VMWGFX_DRIVER_DATE "20211206"
>>
>> Host: Windows 11 & VMware Workstation 16 Pro 16.2.0 build-18760230
>> Guest: Debian 11
>
> Could somebody take a look into this? Or was this discussed somewhere
> else already? Or even fixed?
>
> Anyway, to get this tracked:
>
> #regzbot introduced: v5.16..v5.17-rc7
> #regzbot from: sander44 <ionut_n2001@yahoo.com>
> #regzbot title: "vmwgfx: probe of 0000:00:0f.0 failed with error -16" in
> guest
> #regzbot link: https://bugzilla.kernel.org/show_bug.cgi?id=215678
>
> Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
>
> P.S.: As the Linux kernel's regression tracker I'm getting a lot of
> reports on my table. I can only look briefly into most of them and lack
> knowledge about most of the areas they concern. I thus unfortunately
> will sometimes get things wrong or miss something important. I hope
> that's not the case here; if you think it is, don't hesitate to tell me
> in a public reply, it's in everyone's interest to set the public record
> straight.
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-04-11 10:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-18 7:12 Bug 215678 - vmwgfx: probe of 0000:00:0f.0 failed with error -16 Thorsten Leemhuis
2022-04-11 10:23 ` Bug 215678 - vmwgfx: probe of 0000:00:0f.0 failed with error -16 #forregzbot Thorsten Leemhuis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).