All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Jonathan McDowell <noodles@earth.li>
Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: Re: Audio crackles with 4.1-rc1
Date: Wed, 20 May 2015 07:01:12 +0200	[thread overview]
Message-ID: <s5hd21vu9k7.wl-tiwai@suse.de> (raw)
In-Reply-To: <20150519215310.GF28070@earth.li>

At Tue, 19 May 2015 22:53:10 +0100,
Jonathan McDowell wrote:
> 
> On Tue, May 19, 2015 at 07:09:12PM +0200, Takashi Iwai wrote:
> > At Tue, 19 May 2015 17:19:11 +0100,
> > Jonathan McDowell wrote:
> > > 
> > > On Tue, May 19, 2015 at 08:15:32AM +0200, Takashi Iwai wrote:
> > > > Does the patch below have any improvement?
> > > 
> > > I still get a clicking on the standby -> active transition with the
> > > patch provided on top of 4.1-rc4.
> > 
> > OK, just to be sure, could you check whether changing msleep(10) to
> > msleep(100) makes no difference?  Also put a line like
> > 	pr_info("XXX power up %x\n", nid);
> > after msleep() call to see which nodes are powered up dynamically.
> 
> Increasing the delay, if anything, makes the crackle when powering up
> seem a little longer. dmesg log looks like:
> 
> [ 4206.075557] XXX power up 2
> [ 4206.179671] XXX power up 14
> [ 4206.291758] XXX power up 3

OK, so everything looks correct, but the codec (or the machine) seems
leading to the noise when a branched path is activated while the pin
was already powered up.  Then let's disable the widget power-saving
for these codecs.

Could you confirm that the patch below works?


thanks,

Takashi

-- 8< --
From: Takashi Iwai <tiwai@suse.de>
Subject: [PATCH] ALSA: hda - Disable widget power-saving for ALC292 & co

We've got reports that ALC3226 (a Dell variant of ALC292) gives click
noises at transition from D3 to D0 when the widget power-saving is
enabled.  Further debugging session showed that avoiding it isn't
trivial, unfortunately, since paths are basically activated
dynamically while the pins have been already enabled.

This patch disables the widget power-saving for such codecs.

Reported-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 2e246fe495f6..31f8f13be907 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5623,7 +5623,8 @@ static int patch_alc269(struct hda_codec *codec)
 
 	spec = codec->spec;
 	spec->gen.shared_mic_vref_pin = 0x18;
-	codec->power_save_node = 1;
+	if (codec->core.vendor_id != 0x10ec0292)
+		codec->power_save_node = 1;
 
 	snd_hda_pick_fixup(codec, alc269_fixup_models,
 		       alc269_fixup_tbl, alc269_fixups);
-- 
2.4.1


  reply	other threads:[~2015-05-20  5:01 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-28 11:21 Audio crackles with 4.1-rc1 Jonathan McDowell
2015-04-28 12:00 ` Takashi Iwai
2015-04-28 12:35   ` Jonathan McDowell
2015-04-28 13:05     ` Takashi Iwai
2015-04-28 14:43       ` Takashi Iwai
2015-04-29 11:28         ` Jonathan McDowell
2015-04-29 11:54           ` Takashi Iwai
2015-04-30 15:01             ` Jonathan McDowell
2015-04-30 17:06               ` Takashi Iwai
2015-05-02 15:05                 ` Jonathan McDowell
2015-05-19  6:15                   ` Takashi Iwai
2015-05-19 16:19                     ` Jonathan McDowell
2015-05-19 17:09                       ` Takashi Iwai
2015-05-19 21:53                         ` Jonathan McDowell
2015-05-20  5:01                           ` Takashi Iwai [this message]
2015-05-20 20:02                             ` Jonathan McDowell
2015-06-10 10:17                             ` Mihai Donțu
2015-06-10 10:22                               ` Takashi Iwai
2015-06-10 10:41                                 ` Mihai Donțu
2015-06-10 10:50                                   ` Takashi Iwai
2015-06-10 10:50                                     ` Takashi Iwai
2015-06-10 11:45                                     ` Mihai Donțu
2015-06-10 11:45                                       ` Mihai Donțu
2015-06-10 12:33                                       ` Takashi Iwai
2015-06-10 12:33                                         ` Takashi Iwai
2015-06-10 12:50                                         ` Takashi Iwai
2015-06-10 16:22                                           ` Mihai Donțu
2015-06-10 16:22                                             ` Mihai Donțu
2015-06-10 16:27                                             ` Takashi Iwai
2015-06-10 16:43                                               ` Mihai Donțu
2015-06-10 16:43                                                 ` Mihai Donțu
2015-06-10 18:23                                                 ` Takashi Iwai
2015-06-10 22:12                                                   ` Mihai Donțu
2015-06-11  5:01                                                     ` Takashi Iwai
2015-06-11 22:23                                                       ` Mihai Donțu
2015-06-12  7:00                                                         ` Takashi Iwai
2015-06-12  9:45                                                           ` Mihai Donțu
2015-06-12 10:09                                                             ` Takashi Iwai
2015-06-12 14:13                                                               ` Takashi Iwai
2015-06-12 17:28                                                                 ` Mihai Donțu
2015-06-14 12:24                                                                 ` Jonathan McDowell
2015-06-14 12:24                                                                   ` Jonathan McDowell
2015-06-15 12:04                                                                   ` Takashi Iwai
2015-06-15 12:04                                                                     ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hd21vu9k7.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=noodles@earth.li \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.