All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan McDowell <noodles@earth.li>
To: Takashi Iwai <tiwai@suse.de>
Cc: "Mihai Donțu" <mihai.dontu@gmail.com>,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: Re: Audio crackles with 4.1-rc1
Date: Sun, 14 Jun 2015 13:24:20 +0100	[thread overview]
Message-ID: <20150614122420.GT28070@earth.li> (raw)
In-Reply-To: <s5hk2v9hv5v.wl-tiwai@suse.de>

On Fri, Jun 12, 2015 at 04:13:16PM +0200, Takashi Iwai wrote:
> At Fri, 12 Jun 2015 12:09:55 +0200,
> Takashi Iwai wrote:
> > At Fri, 12 Jun 2015 12:45:23 +0300,
> > Mihai Donțu wrote:
> > > Nice shot! It appears to work. :-) No clicks, no static.
> > 
> > Good to hear!
> > 
> > > I had to apply it by hand over 4.1-rc7, because the first two arrays
> > > look different in both it and -master. Anyway, I will play with it some
> > > more today see if anything else is broken.
> > 
> > While we are at it: could you try to enable codec->power_save_node in
> > patch_alc269() (while keeping the new patch)?
> > 
> > --- a/sound/pci/hda/patch_realtek.c
> > +++ b/sound/pci/hda/patch_realtek.c
> > @@ -5671,8 +5671,7 @@ static int patch_alc269(struct hda_codec *codec)
> >  
> >  	spec = codec->spec;
> >  	spec->gen.shared_mic_vref_pin = 0x18;
> > -	if (codec->core.vendor_id != 0x10ec0292)
> > -		codec->power_save_node = 1;
> > +	codec->power_save_node = 1;
> >  
> >  #ifdef CONFIG_PM
> >  	codec->patch_ops.suspend = alc269_suspend;
> 
> For your convenience, below is the combined patch for 4.1.
> 
> Jonathan, could you also try this patch and see whether you still get
> the noise?

Applying the combined patch to 4.1-rc7 I'm not getting any noise on the
transition from suspended to active.

J.

-- 
   101 things you can't have too   |  .''`.  Debian GNU/Linux Developer
    much of : 47 - More coffee.    | : :' :  Happy to accept PGP signed
                                   | `. `'   or encrypted mail - RSA
                                   |   `-    key on the keyservers.

WARNING: multiple messages have this Message-ID (diff)
From: Jonathan McDowell <noodles@earth.li>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	"Mihai Donțu" <mihai.dontu@gmail.com>
Subject: Re: Audio crackles with 4.1-rc1
Date: Sun, 14 Jun 2015 13:24:20 +0100	[thread overview]
Message-ID: <20150614122420.GT28070@earth.li> (raw)
In-Reply-To: <s5hk2v9hv5v.wl-tiwai@suse.de>

On Fri, Jun 12, 2015 at 04:13:16PM +0200, Takashi Iwai wrote:
> At Fri, 12 Jun 2015 12:09:55 +0200,
> Takashi Iwai wrote:
> > At Fri, 12 Jun 2015 12:45:23 +0300,
> > Mihai Donțu wrote:
> > > Nice shot! It appears to work. :-) No clicks, no static.
> > 
> > Good to hear!
> > 
> > > I had to apply it by hand over 4.1-rc7, because the first two arrays
> > > look different in both it and -master. Anyway, I will play with it some
> > > more today see if anything else is broken.
> > 
> > While we are at it: could you try to enable codec->power_save_node in
> > patch_alc269() (while keeping the new patch)?
> > 
> > --- a/sound/pci/hda/patch_realtek.c
> > +++ b/sound/pci/hda/patch_realtek.c
> > @@ -5671,8 +5671,7 @@ static int patch_alc269(struct hda_codec *codec)
> >  
> >  	spec = codec->spec;
> >  	spec->gen.shared_mic_vref_pin = 0x18;
> > -	if (codec->core.vendor_id != 0x10ec0292)
> > -		codec->power_save_node = 1;
> > +	codec->power_save_node = 1;
> >  
> >  #ifdef CONFIG_PM
> >  	codec->patch_ops.suspend = alc269_suspend;
> 
> For your convenience, below is the combined patch for 4.1.
> 
> Jonathan, could you also try this patch and see whether you still get
> the noise?

Applying the combined patch to 4.1-rc7 I'm not getting any noise on the
transition from suspended to active.

J.

-- 
   101 things you can't have too   |  .''`.  Debian GNU/Linux Developer
    much of : 47 - More coffee.    | : :' :  Happy to accept PGP signed
                                   | `. `'   or encrypted mail - RSA
                                   |   `-    key on the keyservers.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  parent reply	other threads:[~2015-06-14 12:24 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-28 11:21 Audio crackles with 4.1-rc1 Jonathan McDowell
2015-04-28 12:00 ` Takashi Iwai
2015-04-28 12:35   ` Jonathan McDowell
2015-04-28 13:05     ` Takashi Iwai
2015-04-28 14:43       ` Takashi Iwai
2015-04-29 11:28         ` Jonathan McDowell
2015-04-29 11:54           ` Takashi Iwai
2015-04-30 15:01             ` Jonathan McDowell
2015-04-30 17:06               ` Takashi Iwai
2015-05-02 15:05                 ` Jonathan McDowell
2015-05-19  6:15                   ` Takashi Iwai
2015-05-19 16:19                     ` Jonathan McDowell
2015-05-19 17:09                       ` Takashi Iwai
2015-05-19 21:53                         ` Jonathan McDowell
2015-05-20  5:01                           ` Takashi Iwai
2015-05-20 20:02                             ` Jonathan McDowell
2015-06-10 10:17                             ` Mihai Donțu
2015-06-10 10:22                               ` Takashi Iwai
2015-06-10 10:41                                 ` Mihai Donțu
2015-06-10 10:50                                   ` Takashi Iwai
2015-06-10 10:50                                     ` Takashi Iwai
2015-06-10 11:45                                     ` Mihai Donțu
2015-06-10 11:45                                       ` Mihai Donțu
2015-06-10 12:33                                       ` Takashi Iwai
2015-06-10 12:33                                         ` Takashi Iwai
2015-06-10 12:50                                         ` Takashi Iwai
2015-06-10 16:22                                           ` Mihai Donțu
2015-06-10 16:22                                             ` Mihai Donțu
2015-06-10 16:27                                             ` Takashi Iwai
2015-06-10 16:43                                               ` Mihai Donțu
2015-06-10 16:43                                                 ` Mihai Donțu
2015-06-10 18:23                                                 ` Takashi Iwai
2015-06-10 22:12                                                   ` Mihai Donțu
2015-06-11  5:01                                                     ` Takashi Iwai
2015-06-11 22:23                                                       ` Mihai Donțu
2015-06-12  7:00                                                         ` Takashi Iwai
2015-06-12  9:45                                                           ` Mihai Donțu
2015-06-12 10:09                                                             ` Takashi Iwai
2015-06-12 14:13                                                               ` Takashi Iwai
2015-06-12 17:28                                                                 ` Mihai Donțu
2015-06-14 12:24                                                                 ` Jonathan McDowell [this message]
2015-06-14 12:24                                                                   ` Jonathan McDowell
2015-06-15 12:04                                                                   ` Takashi Iwai
2015-06-15 12:04                                                                     ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150614122420.GT28070@earth.li \
    --to=noodles@earth.li \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mihai.dontu@gmail.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.