* [GIT PULL] STM32 DT changes for v5.17 #1
@ 2021-12-15 10:56 Alexandre TORGUE
2021-12-15 15:10 ` patchwork-bot+linux-soc
0 siblings, 1 reply; 2+ messages in thread
From: Alexandre TORGUE @ 2021-12-15 10:56 UTC (permalink / raw)
To: Arnd Bergmann, Olof Johansson, Kevin Hilman, SoC Team, arm-soc
Cc: Alexandre TORGUE, linux-arm-kernel, linux-stm32, Jagan Teki
Dear ARM SoC maintainers,
Please consider this first round of STM32 DT updates for v5.17.
Regards
Alex
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
tags/stm32-dt-for-v5.17-1
for you to fetch changes up to 3ff0810ffc4793bfde454a452837484d0815aa14:
ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF
(2021-12-06 09:31:05 +0100)
----------------------------------------------------------------
STM32 DT for v5.17, round 1
Highlights:
----------
-MCU:
- fix ili9341 for dtbs_check warnings on stm32f429 disco.
- MPU:
- ST boards:
- tune HS USB phys on stm32mp15 EV1 and DKx boards.
- add pull-up on USART3/UART7 RX pins on STM32MP15 DKx boards.
- use correct pinctrl setting for STUSB1600 on STM32MP15 DK boards.
- ENGICAM:
- enable LVDS pannel on i.Core STM32MP1 EDIMM2.2.
- add "i.Core STM32MP1 C.TOUCH 2.0 10.1" OF" support:
EDIMM compliant general purpose carrier board with ETH 10/100,
WIFI/BT, CAN, ...
----------------------------------------------------------------
Dillon Min (1):
ARM: dts: stm32: fix dtbs_check warning on ili9341 dts binding on
stm32f429 disco
Erwan Le Ray (2):
ARM: dts: stm32: add pull-up to USART3 and UART7 RX pins on
STM32MP15 DKx boards
ARM: dts: stm32: clean uart4_idle_pins_a node for stm32mp15
Fabrice Gasnier (3):
ARM: dts: stm32: tune the HS USB PHYs on stm32mp15xx-dkx
ARM: dts: stm32: tune the HS USB PHYs on stm32mp157c-ev1
ARM: dts: stm32: fix stusb1600 pinctrl used on stm32mp157c-dk
Jagan Teki (3):
ARM: dts: stm32: Enable LVDS panel on i.Core STM32MP1 EDIMM2.2
dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
10.1" OF
ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF
.../devicetree/bindings/arm/stm32/stm32.yaml | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/stm32f429-disco.dts | 2 +-
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 32 ++---
.../stm32mp157a-icore-stm32mp1-ctouch2-of10.dts | 132
+++++++++++++++++++++
.../dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts | 85 +++++++++++++
arch/arm/boot/dts/stm32mp157c-ev1.dts | 22 ++++
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 16 +++
8 files changed, 274 insertions(+), 17 deletions(-)
create mode 100644
arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] STM32 DT changes for v5.17 #1
2021-12-15 10:56 [GIT PULL] STM32 DT changes for v5.17 #1 Alexandre TORGUE
@ 2021-12-15 15:10 ` patchwork-bot+linux-soc
0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+linux-soc @ 2021-12-15 15:10 UTC (permalink / raw)
To: Alexandre TORGUE; +Cc: soc
Hello:
This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:
On Wed, 15 Dec 2021 11:56:29 +0100 you wrote:
> Dear ARM SoC maintainers,
>
> Please consider this first round of STM32 DT updates for v5.17.
>
> Regards
> Alex
>
> [...]
Here is the summary with links:
- [GIT,PULL] STM32 DT changes for v5.17 #1
https://git.kernel.org/soc/soc/c/03e9474bfc4d
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-12-15 15:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-15 10:56 [GIT PULL] STM32 DT changes for v5.17 #1 Alexandre TORGUE
2021-12-15 15:10 ` patchwork-bot+linux-soc
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).