* [GIT PULL] firmware: arm_scmi: Updates for v6.7
@ 2023-10-10 12:43 Sudeep Holla
2023-10-16 21:31 ` patchwork-bot+linux-soc
0 siblings, 1 reply; 2+ messages in thread
From: Sudeep Holla @ 2023-10-10 12:43 UTC (permalink / raw)
To: ARM SoC Team, SoC Team, ALKML
Cc: Sudeep Holla, Arnd Bergmann, Cristian Marussi, Olof Johansson
Hi ARM SoC Team,
Note that this pull request contains changes in the OPP, pmdomain and
the clock drivers. They have been acked-by the maintainers agreeing to
take these changes via Arm SoC tree. Also note the OPP changes are merged
into SCMI using immutable branch shared with OPP tree.
Please pull !
Regards,
Sudeep
-->8
The following changes since commit ce9ecca0238b140b88f43859b211c9fdfd8e5b70:
Linux 6.6-rc2 (2023-09-17 14:40:24 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux.git tags/scmi-updates-6.7
for you to fetch changes up to da405477e7670782241234ea6b4309f3224ecb63:
firmware: arm_scmi: Add qcom smc/hvc transport support (2023-10-09 22:07:13 +0100)
----------------------------------------------------------------
Arm SCMI updates for v6.7
Main additions this time include:
1. SCMI v3.2 clock configuration support:
This helps to retrieve the enabled state of a clock as well as allow
to set OEM specific clock configurations.
2. Support for generic performance scaling(DVFS):
The current SCMI DVFS support is limited to the CPUs in the kernel.
This extension enables it to used for all kind of devices and not
only for the CPUs. It updates the SCMI cpufreq to utilize the power
domain bindings. It also adds a more generic SCMI performance domain
based on the genpd framework that as be used for all the non-CPU
devices.
3. Extend the generic performance scaling(DVFS) support for firmware
driver OPPs:
Consumer drivers for devices that are attached to the SCMI performance
domain can't make use of the current OPP library to scale performance
as the OPPs are firmware driven and often obtained from the firmware
rather than the device tree. These changes extend the generic OPP
and genpd PM domain frameworks to identify and utilise these firmware
driven OPPs.
4. SCMI v3.2 clock parent support:
This enables the support for discovering and changing parent clocks
and extending the SCMI clk driver to use the same.
5. Qualcom SMC/HVC transport support:
The Qualcomm virtual platforms require capability id in the hypervisor
call to identify which doorbell to assert when supporting multiple
SMC/HVC based SCMI transport channels. Extra parameter is added to
support the same and the same is obtained at the fixed address in the
shared memory which is initialised by the firmware.
6. Move the existing SCMI power domain driver under drivers/pmdomain
Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.
----------------------------------------------------------------
Cristian Marussi (6):
firmware: arm_scmi: Simplify enable/disable clock operations
firmware: arm_scmi: Add clock v3.2 CONFIG_SET support
firmware: arm_scmi: Add v3.2 clock CONFIG_GET support
firmware: arm_scmi: Add clock .state_get support to pre-v3.2
clk: scmi: Add support for .is_enabled clk_ops
firmware: arm_scmi: Add clock OEM config clock operations
Nikunj Kela (2):
dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI
firmware: arm_scmi: Add qcom smc/hvc transport support
Peng Fan (2):
firmware: arm_scmi: Add support for clock parents
clk: scmi: Add support for clock {set,get}_parent
Rob Herring (1):
firmware: arm_scpi: Use device_get_match_data()
Sudeep Holla (6):
firmware: arm_scmi: Move power-domain driver to the pmdomain dir
firmware: arm_scmi: Do not use !! on boolean when setting msg->flags
firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21}
Merge branch 'opp/pm-domain-scmi' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into for-next/scmi/updates
clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped
firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke()
Ulf Hansson (21):
firmware: arm_scmi: Extend perf protocol ops to get number of domains
firmware: arm_scmi: Extend perf protocol ops to get information of a domain
cpufreq: scmi: Prepare to move OF parsing of domain-id to cpufreq
firmware: arm_scmi: Align perf ops to use domain-id as in-parameter
firmware: arm_scmi: Drop redundant ->device_domain_id() from perf ops
cpufreq: scmi: Avoid one OF parsing in scmi_get_sharing_cpus()
dt-bindings: arm: cpus: Add a power-domain-name for a performance-domain
dt-bindings: firmware: arm,scmi: Extend bindings for protocol@13
dt-bindings: power: Clarify performance capabilities of power-domains
cpufreq: scmi: Add support to parse domain-id using #power-domain-cells
PM: domains: Allow genpd providers to manage OPP tables directly by its FW
pmdomain: arm: Add the SCMI performance domain
PM: domains: Introduce dev_pm_domain_set_performance_state()
PM: domains: Implement the ->set_performance_state() callback for genpd
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
OPP: Extend dev_pm_opp_data with a level
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend support for the opp-level beyond required-opps
firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add()
firmware: arm_scmi: Specify the performance level when adding an OPP
firmware: arm_scmi: Add generic OPP support to the SCMI performance domain
Documentation/devicetree/bindings/arm/cpus.yaml | 4 +-
.../devicetree/bindings/firmware/arm,scmi.yaml | 15 +-
.../devicetree/bindings/power/power-domain.yaml | 17 +-
MAINTAINERS | 1 +
drivers/base/power/common.c | 21 ++
drivers/base/power/domain.c | 44 ++-
drivers/clk/clk-scmi.c | 96 ++++-
drivers/cpufreq/scmi-cpufreq.c | 52 ++-
drivers/firmware/arm_scmi/Kconfig | 12 +
drivers/firmware/arm_scmi/Makefile | 1 -
drivers/firmware/arm_scmi/clock.c | 402 +++++++++++++++++++--
drivers/firmware/arm_scmi/driver.c | 1 +
drivers/firmware/arm_scmi/perf.c | 112 +++---
drivers/firmware/arm_scmi/powercap.c | 4 +-
drivers/firmware/arm_scmi/smc.c | 35 +-
drivers/firmware/arm_scpi.c | 13 +-
drivers/opp/core.c | 60 ++-
drivers/opp/of.c | 10 +-
drivers/opp/opp.h | 2 +-
drivers/pmdomain/Makefile | 1 +
drivers/pmdomain/arm/Makefile | 4 +
drivers/pmdomain/arm/scmi_perf_domain.c | 184 ++++++++++
.../arm_scmi => pmdomain/arm}/scmi_pm_domain.c | 0
include/linux/pm.h | 2 +
include/linux/pm_domain.h | 11 +
include/linux/pm_opp.h | 31 +-
include/linux/scmi_protocol.h | 43 ++-
27 files changed, 994 insertions(+), 184 deletions(-)
create mode 100644 drivers/pmdomain/arm/Makefile
create mode 100644 drivers/pmdomain/arm/scmi_perf_domain.c
rename drivers/{firmware/arm_scmi => pmdomain/arm}/scmi_pm_domain.c (100%)
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] firmware: arm_scmi: Updates for v6.7
2023-10-10 12:43 [GIT PULL] firmware: arm_scmi: Updates for v6.7 Sudeep Holla
@ 2023-10-16 21:31 ` patchwork-bot+linux-soc
0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+linux-soc @ 2023-10-16 21:31 UTC (permalink / raw)
To: Sudeep Holla; +Cc: soc
Hello:
This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:
On Tue, 10 Oct 2023 13:43:47 +0100 you wrote:
> Hi ARM SoC Team,
>
> Note that this pull request contains changes in the OPP, pmdomain and
> the clock drivers. They have been acked-by the maintainers agreeing to
> take these changes via Arm SoC tree. Also note the OPP changes are merged
> into SCMI using immutable branch shared with OPP tree.
>
> [...]
Here is the summary with links:
- [GIT,PULL] firmware: arm_scmi: Updates for v6.7
https://git.kernel.org/soc/soc/c/d1debb7b322c
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-10-16 21:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-10-10 12:43 [GIT PULL] firmware: arm_scmi: Updates for v6.7 Sudeep Holla
2023-10-16 21:31 ` patchwork-bot+linux-soc
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).