* Re: [PATCH] ARM: config: ux500: Update U8500 defconfig
[not found] <20201105134510.1417639-1-linus.walleij@linaro.org>
@ 2020-11-23 16:51 ` Arnd Bergmann
2020-11-23 16:51 ` Arnd Bergmann
0 siblings, 1 reply; 2+ messages in thread
From: Arnd Bergmann @ 2020-11-23 16:51 UTC (permalink / raw)
To: soc, Linus Walleij, arm; +Cc: Arnd Bergmann, linux-arm-kernel, Stephan Gerhold
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 5 Nov 2020 14:45:10 +0100, Linus Walleij wrote:
> This updates the defconfig for the U8500 platform with
> some of the changes from the v5.9 and v5.10 kernel
> cycles:
>
> - No need to select the schedutil cpufreq governor
> because it is the default now.
> - Enable the CY8CTMA140 touchscreen as used on the
> Samsung Skomer GT-S7710.
> - Enable the Samsung S6E63M0 DSI panel as used on
> the Samsung Golden GT-I8810.
> - Enable the KTD253 backlight as used on the Samsung
> Skomer GT-S7710.
> - Drop CONFIG_USB as we only use the gadget mode of
> the MUSB driver.
> - Add selection of the CONFIG_LEDS_LP55XX_COMMON
> lest the LP5521 LEDs will not work.
> - Move the config entry for CONFIG_DEBUG_FS.
Applied to arm/defconfig, thanks!
[1/1] ARM: config: ux500: Update U8500 defconfig
commit: a65183ff1535ed15c28c526f6b69ed03c21d34b4
Arnd
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: config: ux500: Update U8500 defconfig
2020-11-23 16:51 ` [PATCH] ARM: config: ux500: Update U8500 defconfig Arnd Bergmann
@ 2020-11-23 16:51 ` Arnd Bergmann
0 siblings, 0 replies; 2+ messages in thread
From: Arnd Bergmann @ 2020-11-23 16:51 UTC (permalink / raw)
To: soc, Linus Walleij, arm; +Cc: Stephan Gerhold, linux-arm-kernel, Arnd Bergmann
From: Arnd Bergmann <arnd@arndb.de>
On Thu, 5 Nov 2020 14:45:10 +0100, Linus Walleij wrote:
> This updates the defconfig for the U8500 platform with
> some of the changes from the v5.9 and v5.10 kernel
> cycles:
>
> - No need to select the schedutil cpufreq governor
> because it is the default now.
> - Enable the CY8CTMA140 touchscreen as used on the
> Samsung Skomer GT-S7710.
> - Enable the Samsung S6E63M0 DSI panel as used on
> the Samsung Golden GT-I8810.
> - Enable the KTD253 backlight as used on the Samsung
> Skomer GT-S7710.
> - Drop CONFIG_USB as we only use the gadget mode of
> the MUSB driver.
> - Add selection of the CONFIG_LEDS_LP55XX_COMMON
> lest the LP5521 LEDs will not work.
> - Move the config entry for CONFIG_DEBUG_FS.
Applied to arm/defconfig, thanks!
[1/1] ARM: config: ux500: Update U8500 defconfig
commit: a65183ff1535ed15c28c526f6b69ed03c21d34b4
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, back to index
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20201105134510.1417639-1-linus.walleij@linaro.org>
2020-11-23 16:51 ` [PATCH] ARM: config: ux500: Update U8500 defconfig Arnd Bergmann
2020-11-23 16:51 ` Arnd Bergmann
SOC Archive on lore.kernel.org
Archives are clonable:
git clone --mirror https://lore.kernel.org/soc/0 soc/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 soc soc/ https://lore.kernel.org/soc \
soc@kernel.org
public-inbox-index soc
Example config snippet for mirrors
Newsgroup available over NNTP:
nntp://nntp.lore.kernel.org/org.kernel.lore.soc
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git