* [GIT PULL 1/5] Broadcom defconfig changes for 5.11
@ 2020-11-28 16:34 Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
` (5 more replies)
0 siblings, 6 replies; 20+ messages in thread
From: Florian Fainelli @ 2020-11-28 16:34 UTC (permalink / raw)
To: soc
Cc: Florian Fainelli, Sudeep Holla, linux-arm-kernel, arnd, olof,
khilman, bcm-kernel-feedback-list
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/defconfig
for you to fetch changes up to 950be99fccffa920e148fd46e33db4d509e8af63:
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers (2020-11-27 20:51:34 -0800)
----------------------------------------------------------------
This pull request contains ARM multi_v7_defconfig changes for 5.11,
please pull the following:
- Florian enables the ARM SCMI protocol, and the common clock, HWMON and
CPU frequency scaling drivers since those are used by ARCH_BRCMSTB
platforms
----------------------------------------------------------------
Florian Fainelli (1):
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
arch/arm/configs/multi_v7_defconfig | 4 ++++
1 file changed, 4 insertions(+)
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 1/5] Broadcom defconfig changes for 5.11
2020-11-28 16:34 [GIT PULL 1/5] Broadcom defconfig changes for 5.11 Florian Fainelli
@ 2020-11-28 16:34 ` Florian Fainelli
2020-11-28 16:34 ` [GIT PULL 2/5] Broadcom defconfig-arm64 " Florian Fainelli
` (4 subsequent siblings)
5 siblings, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2020-11-28 16:34 UTC (permalink / raw)
To: soc
Cc: Florian Fainelli, arnd, khilman, bcm-kernel-feedback-list,
Sudeep Holla, olof, linux-arm-kernel
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/defconfig
for you to fetch changes up to 950be99fccffa920e148fd46e33db4d509e8af63:
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers (2020-11-27 20:51:34 -0800)
----------------------------------------------------------------
This pull request contains ARM multi_v7_defconfig changes for 5.11,
please pull the following:
- Florian enables the ARM SCMI protocol, and the common clock, HWMON and
CPU frequency scaling drivers since those are used by ARCH_BRCMSTB
platforms
----------------------------------------------------------------
Florian Fainelli (1):
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
arch/arm/configs/multi_v7_defconfig | 4 ++++
1 file changed, 4 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 2/5] Broadcom defconfig-arm64 changes for 5.11
2020-11-28 16:34 [GIT PULL 1/5] Broadcom defconfig changes for 5.11 Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
@ 2020-11-28 16:34 ` Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
2020-12-08 16:34 ` Arnd Bergmann
2020-11-28 16:34 ` [GIT PULL 3/5] Broadcom devicetree " Florian Fainelli
` (3 subsequent siblings)
5 siblings, 2 replies; 20+ messages in thread
From: Florian Fainelli @ 2020-11-28 16:34 UTC (permalink / raw)
To: soc
Cc: Florian Fainelli, Sudeep Holla, linux-arm-kernel, arnd, olof,
khilman, bcm-kernel-feedback-list
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/defconfig-arm64
for you to fetch changes up to 6a7dc2b3639adc7f9ff5c148aeaef0ee775f6c3a:
arm64: defconfig: Enable ARM SCMI protocol and drivers (2020-11-27 20:52:00 -0800)
----------------------------------------------------------------
This pull request contains ARM64 defconfig changes for 5.11, please pull
the following:
- Florian enables the ARM SCMI protocol, and the common clock, HWMON and
CPU frequency scaling drivers since those are used by ARCH_BRCMSTB
platforms
----------------------------------------------------------------
Florian Fainelli (1):
arm64: defconfig: Enable ARM SCMI protocol and drivers
arch/arm64/configs/defconfig | 4 ++++
1 file changed, 4 insertions(+)
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 2/5] Broadcom defconfig-arm64 changes for 5.11
2020-11-28 16:34 ` [GIT PULL 2/5] Broadcom defconfig-arm64 " Florian Fainelli
@ 2020-11-28 16:34 ` Florian Fainelli
2020-12-08 16:34 ` Arnd Bergmann
1 sibling, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2020-11-28 16:34 UTC (permalink / raw)
To: soc
Cc: Florian Fainelli, arnd, khilman, bcm-kernel-feedback-list,
Sudeep Holla, olof, linux-arm-kernel
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/defconfig-arm64
for you to fetch changes up to 6a7dc2b3639adc7f9ff5c148aeaef0ee775f6c3a:
arm64: defconfig: Enable ARM SCMI protocol and drivers (2020-11-27 20:52:00 -0800)
----------------------------------------------------------------
This pull request contains ARM64 defconfig changes for 5.11, please pull
the following:
- Florian enables the ARM SCMI protocol, and the common clock, HWMON and
CPU frequency scaling drivers since those are used by ARCH_BRCMSTB
platforms
----------------------------------------------------------------
Florian Fainelli (1):
arm64: defconfig: Enable ARM SCMI protocol and drivers
arch/arm64/configs/defconfig | 4 ++++
1 file changed, 4 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 3/5] Broadcom devicetree changes for 5.11
2020-11-28 16:34 [GIT PULL 1/5] Broadcom defconfig changes for 5.11 Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
2020-11-28 16:34 ` [GIT PULL 2/5] Broadcom defconfig-arm64 " Florian Fainelli
@ 2020-11-28 16:34 ` Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
2020-12-08 23:09 ` Arnd Bergmann
2020-11-28 16:34 ` [GIT PULL 4/5] Broadcom devicetree-arm64 " Florian Fainelli
` (2 subsequent siblings)
5 siblings, 2 replies; 20+ messages in thread
From: Florian Fainelli @ 2020-11-28 16:34 UTC (permalink / raw)
To: soc
Cc: Florian Fainelli, Kurt Kanzenbach, Rob Herring, Vladimir Oltean,
Rafał Miłecki, Pavel Hofman, Phil Elwell,
Nicolas Saenz Julienne, Maxime Ripard, Jonathan Cameron,
kernel test robot, Vivek Unune, Serge Semin, Krzysztof Kozlowski,
linux-arm-kernel, arnd, olof, khilman, bcm-kernel-feedback-list
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/devicetree
for you to fetch changes up to f722fbac1e533ea1fe750d99d09c244efff59d59:
Merge tag 'tags/bcm2835-dt-next-2020-11-20' into devicetree/next (2020-11-20 19:14:01 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs changes for 5.11,
please pull the following:
- Vivek updates the Linksys EA9500 DTS by adding the two additional
switch port nodes (5 & 7), providing a flash partition layout to
make the device usable with OpenWrt, and finally switches to using
the pin controller rather than using mdio-mux to get the same outcome.
- Serge fixes the USB Device Tree nodes unit name to be conformant to
the recommended name patterns.
- Rafal re-arranges all the nodes that belonged to the CRU block to be
under the CRU node (such as PLLs). He also disables the USB3 PHY node
for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150
DTS.
- Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC
DTSI.
- Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the
Raspberry Pi 4 due to some cross-talk between the two blocks.
- Pavel updates the DWC2 USB controller RX FIFO sizes to be more
accurate for all BCM283x (Raspberr Pi) SoCs.
- Florian updates all BCM5301x and NSP Device Tree files to allow
switching the Broadcom B53 Ethernet switch device tree binding to YAML.
----------------------------------------------------------------
Florian Fainelli (10):
dt-bindings: net: dsa: Extend switch nodes pattern
dt-bindings: net: dsa: Document sfp and managed properties
ARM: dts: BCM5301X: Update Ethernet switch node name
ARM: dts: BCM5301X: Add a default compatible for switch node
ARM: dts: BCM5301X: Provide defaults ports container node
ARM: dts: NSP: Update ethernet switch node name
ARM: dts: NSP: Fix Ethernet switch SGMII register name
ARM: dts: NSP: Add a SRAB compatible string for each board
ARM: dts: NSP: Provide defaults ports container node
Merge tag 'tags/bcm2835-dt-next-2020-11-20' into devicetree/next
Jonathan Cameron (1):
ARM: dts: Cygnus: Drop incorrect io-channel-ranges property.
Kurt Kanzenbach (1):
dt-bindings: net: dsa: b53: Add YAML bindings
Maxime Ripard (1):
ARM: dts: rpi-4: disable wifi frequencies
Pavel Hofman (1):
ARM: dts: bcm283x: increase dwc2's RX FIFO size
Rafał Miłecki (3):
ARM: dts: BCM5301X: Move CRU devices to the CRU node
ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3
ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
Serge Semin (2):
ARM: dts: BCM5301X: Harmonize EHCI/OHCI DT nodes name
ARM: dts: BCM5310X: Harmonize xHCI DT nodes name
Vivek Unune (4):
ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions
ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x
ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl
Documentation/devicetree/bindings/net/dsa/b53.txt | 149 ------------
.../devicetree/bindings/net/dsa/brcm,b53.yaml | 249 +++++++++++++++++++++
Documentation/devicetree/bindings/net/dsa/dsa.yaml | 6 +-
MAINTAINERS | 2 +-
arch/arm/boot/dts/bcm-cygnus.dtsi | 1 -
arch/arm/boot/dts/bcm-nsp.dtsi | 8 +-
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 2 +
arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 2 +-
arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi | 2 +-
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 7 -
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 7 -
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 -
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 -
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 7 -
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 7 -
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 -
arch/arm/boot/dts/bcm4709.dtsi | 4 +
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 94 +++++---
arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 3 -
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 3 -
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 -
arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 7 +-
arch/arm/boot/dts/bcm47094.dtsi | 13 ++
arch/arm/boot/dts/bcm5301x.dtsi | 67 +++---
arch/arm/boot/dts/bcm53573.dtsi | 4 +-
arch/arm/boot/dts/bcm953012er.dts | 3 -
arch/arm/boot/dts/bcm958522er.dts | 4 +
arch/arm/boot/dts/bcm958525er.dts | 4 +
arch/arm/boot/dts/bcm958525xmc.dts | 4 +
arch/arm/boot/dts/bcm958622hr.dts | 3 -
arch/arm/boot/dts/bcm958623hr.dts | 3 -
arch/arm/boot/dts/bcm958625hr.dts | 3 -
arch/arm/boot/dts/bcm958625k.dts | 3 -
arch/arm/boot/dts/bcm988312hr.dts | 3 -
34 files changed, 405 insertions(+), 283 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/dsa/b53.txt
create mode 100644 Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 3/5] Broadcom devicetree changes for 5.11
2020-11-28 16:34 ` [GIT PULL 3/5] Broadcom devicetree " Florian Fainelli
@ 2020-11-28 16:34 ` Florian Fainelli
2020-12-08 23:09 ` Arnd Bergmann
1 sibling, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2020-11-28 16:34 UTC (permalink / raw)
To: soc
Cc: linux-arm-kernel, Rob Herring, Florian Fainelli, Vivek Unune,
kernel test robot, arnd, khilman, Pavel Hofman,
Krzysztof Kozlowski, Serge Semin, olof, bcm-kernel-feedback-list,
Maxime Ripard, Jonathan Cameron, Rafał Miłecki,
Kurt Kanzenbach, Vladimir Oltean, Phil Elwell,
Nicolas Saenz Julienne
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/devicetree
for you to fetch changes up to f722fbac1e533ea1fe750d99d09c244efff59d59:
Merge tag 'tags/bcm2835-dt-next-2020-11-20' into devicetree/next (2020-11-20 19:14:01 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM-based SoCs changes for 5.11,
please pull the following:
- Vivek updates the Linksys EA9500 DTS by adding the two additional
switch port nodes (5 & 7), providing a flash partition layout to
make the device usable with OpenWrt, and finally switches to using
the pin controller rather than using mdio-mux to get the same outcome.
- Serge fixes the USB Device Tree nodes unit name to be conformant to
the recommended name patterns.
- Rafal re-arranges all the nodes that belonged to the CRU block to be
under the CRU node (such as PLLs). He also disables the USB3 PHY node
for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150
DTS.
- Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC
DTSI.
- Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the
Raspberry Pi 4 due to some cross-talk between the two blocks.
- Pavel updates the DWC2 USB controller RX FIFO sizes to be more
accurate for all BCM283x (Raspberr Pi) SoCs.
- Florian updates all BCM5301x and NSP Device Tree files to allow
switching the Broadcom B53 Ethernet switch device tree binding to YAML.
----------------------------------------------------------------
Florian Fainelli (10):
dt-bindings: net: dsa: Extend switch nodes pattern
dt-bindings: net: dsa: Document sfp and managed properties
ARM: dts: BCM5301X: Update Ethernet switch node name
ARM: dts: BCM5301X: Add a default compatible for switch node
ARM: dts: BCM5301X: Provide defaults ports container node
ARM: dts: NSP: Update ethernet switch node name
ARM: dts: NSP: Fix Ethernet switch SGMII register name
ARM: dts: NSP: Add a SRAB compatible string for each board
ARM: dts: NSP: Provide defaults ports container node
Merge tag 'tags/bcm2835-dt-next-2020-11-20' into devicetree/next
Jonathan Cameron (1):
ARM: dts: Cygnus: Drop incorrect io-channel-ranges property.
Kurt Kanzenbach (1):
dt-bindings: net: dsa: b53: Add YAML bindings
Maxime Ripard (1):
ARM: dts: rpi-4: disable wifi frequencies
Pavel Hofman (1):
ARM: dts: bcm283x: increase dwc2's RX FIFO size
Rafał Miłecki (3):
ARM: dts: BCM5301X: Move CRU devices to the CRU node
ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3
ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
Serge Semin (2):
ARM: dts: BCM5301X: Harmonize EHCI/OHCI DT nodes name
ARM: dts: BCM5310X: Harmonize xHCI DT nodes name
Vivek Unune (4):
ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions
ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x
ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl
Documentation/devicetree/bindings/net/dsa/b53.txt | 149 ------------
.../devicetree/bindings/net/dsa/brcm,b53.yaml | 249 +++++++++++++++++++++
Documentation/devicetree/bindings/net/dsa/dsa.yaml | 6 +-
MAINTAINERS | 2 +-
arch/arm/boot/dts/bcm-cygnus.dtsi | 1 -
arch/arm/boot/dts/bcm-nsp.dtsi | 8 +-
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 2 +
arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 2 +-
arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi | 2 +-
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 7 -
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 7 -
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 -
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 -
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 7 -
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 7 -
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 -
arch/arm/boot/dts/bcm4709.dtsi | 4 +
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 94 +++++---
arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 3 -
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 3 -
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 -
arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 7 +-
arch/arm/boot/dts/bcm47094.dtsi | 13 ++
arch/arm/boot/dts/bcm5301x.dtsi | 67 +++---
arch/arm/boot/dts/bcm53573.dtsi | 4 +-
arch/arm/boot/dts/bcm953012er.dts | 3 -
arch/arm/boot/dts/bcm958522er.dts | 4 +
arch/arm/boot/dts/bcm958525er.dts | 4 +
arch/arm/boot/dts/bcm958525xmc.dts | 4 +
arch/arm/boot/dts/bcm958622hr.dts | 3 -
arch/arm/boot/dts/bcm958623hr.dts | 3 -
arch/arm/boot/dts/bcm958625hr.dts | 3 -
arch/arm/boot/dts/bcm958625k.dts | 3 -
arch/arm/boot/dts/bcm988312hr.dts | 3 -
34 files changed, 405 insertions(+), 283 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/dsa/b53.txt
create mode 100644 Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 4/5] Broadcom devicetree-arm64 changes for 5.11
2020-11-28 16:34 [GIT PULL 1/5] Broadcom defconfig changes for 5.11 Florian Fainelli
` (2 preceding siblings ...)
2020-11-28 16:34 ` [GIT PULL 3/5] Broadcom devicetree " Florian Fainelli
@ 2020-11-28 16:34 ` Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
2020-12-08 23:09 ` Arnd Bergmann
2020-11-28 16:34 ` [GIT PULL 5/5] Broadcom drivers " Florian Fainelli
2020-12-08 16:34 ` [GIT PULL 1/5] Broadcom defconfig " Arnd Bergmann
5 siblings, 2 replies; 20+ messages in thread
From: Florian Fainelli @ 2020-11-28 16:34 UTC (permalink / raw)
To: soc
Cc: Rafał Miłecki, Florian Fainelli, linux-arm-kernel,
arnd, olof, khilman, bcm-kernel-feedback-list
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/devicetree-arm64
for you to fetch changes up to dccb22d078ebd098115e4f66bde1ee2249c8640b:
arm64: add config for Broadcom BCM4908 SoCs (2020-11-25 09:07:49 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.11, please pull the following:
- Rafal adds initial support for the Broadcom 4908 which are SoCs used
in home routers and are based on the DSL architecture and using
Broadcom Brahma-B53 CPUs.
----------------------------------------------------------------
Rafał Miłecki (3):
dt-bindings: arm: bcm: document BCM4908 bindings
arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files
arm64: add config for Broadcom BCM4908 SoCs
.../devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 38 +++++
arch/arm64/Kconfig.platforms | 8 +
arch/arm64/boot/dts/broadcom/Makefile | 1 +
arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 2 +
.../broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 66 ++++++++
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 187 +++++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
7 files changed, 303 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 4/5] Broadcom devicetree-arm64 changes for 5.11
2020-11-28 16:34 ` [GIT PULL 4/5] Broadcom devicetree-arm64 " Florian Fainelli
@ 2020-11-28 16:34 ` Florian Fainelli
2020-12-08 23:09 ` Arnd Bergmann
1 sibling, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2020-11-28 16:34 UTC (permalink / raw)
To: soc
Cc: Florian Fainelli, arnd, khilman, olof, bcm-kernel-feedback-list,
Rafał Miłecki, linux-arm-kernel
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/devicetree-arm64
for you to fetch changes up to dccb22d078ebd098115e4f66bde1ee2249c8640b:
arm64: add config for Broadcom BCM4908 SoCs (2020-11-25 09:07:49 -0800)
----------------------------------------------------------------
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.11, please pull the following:
- Rafal adds initial support for the Broadcom 4908 which are SoCs used
in home routers and are based on the DSL architecture and using
Broadcom Brahma-B53 CPUs.
----------------------------------------------------------------
Rafał Miłecki (3):
dt-bindings: arm: bcm: document BCM4908 bindings
arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files
arm64: add config for Broadcom BCM4908 SoCs
.../devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 38 +++++
arch/arm64/Kconfig.platforms | 8 +
arch/arm64/boot/dts/broadcom/Makefile | 1 +
arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 2 +
.../broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 66 ++++++++
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 187 +++++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
7 files changed, 303 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 5/5] Broadcom drivers changes for 5.11
2020-11-28 16:34 [GIT PULL 1/5] Broadcom defconfig changes for 5.11 Florian Fainelli
` (3 preceding siblings ...)
2020-11-28 16:34 ` [GIT PULL 4/5] Broadcom devicetree-arm64 " Florian Fainelli
@ 2020-11-28 16:34 ` Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
2020-12-08 16:08 ` Arnd Bergmann
2020-12-08 16:34 ` [GIT PULL 1/5] Broadcom defconfig " Arnd Bergmann
5 siblings, 2 replies; 20+ messages in thread
From: Florian Fainelli @ 2020-11-28 16:34 UTC (permalink / raw)
To: soc
Cc: Lee Jones, Florian Fainelli, linux-arm-kernel, arnd, olof,
khilman, bcm-kernel-feedback-list
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/drivers
for you to fetch changes up to b96c0546b5908268716ed9b1d39fc604413c630b:
soc: bcm: brcmstb: pm: pm-arm: Provide prototype for brcmstb_pm_s3_finish() (2020-11-03 19:25:04 -0800)
----------------------------------------------------------------
This pull request contains Broadcom SoCs driver changes for 5.11, please
pull the following:
- Lee provides a missing function declaration spotted with W=1 builds
----------------------------------------------------------------
Lee Jones (1):
soc: bcm: brcmstb: pm: pm-arm: Provide prototype for brcmstb_pm_s3_finish()
drivers/soc/bcm/brcmstb/pm/pm-arm.c | 2 ++
1 file changed, 2 insertions(+)
^ permalink raw reply [flat|nested] 20+ messages in thread
* [GIT PULL 5/5] Broadcom drivers changes for 5.11
2020-11-28 16:34 ` [GIT PULL 5/5] Broadcom drivers " Florian Fainelli
@ 2020-11-28 16:34 ` Florian Fainelli
2020-12-08 16:08 ` Arnd Bergmann
1 sibling, 0 replies; 20+ messages in thread
From: Florian Fainelli @ 2020-11-28 16:34 UTC (permalink / raw)
To: soc
Cc: Florian Fainelli, arnd, khilman, bcm-kernel-feedback-list, olof,
Lee Jones, linux-arm-kernel
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/drivers
for you to fetch changes up to b96c0546b5908268716ed9b1d39fc604413c630b:
soc: bcm: brcmstb: pm: pm-arm: Provide prototype for brcmstb_pm_s3_finish() (2020-11-03 19:25:04 -0800)
----------------------------------------------------------------
This pull request contains Broadcom SoCs driver changes for 5.11, please
pull the following:
- Lee provides a missing function declaration spotted with W=1 builds
----------------------------------------------------------------
Lee Jones (1):
soc: bcm: brcmstb: pm: pm-arm: Provide prototype for brcmstb_pm_s3_finish()
drivers/soc/bcm/brcmstb/pm/pm-arm.c | 2 ++
1 file changed, 2 insertions(+)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 5/5] Broadcom drivers changes for 5.11
2020-11-28 16:34 ` [GIT PULL 5/5] Broadcom drivers " Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
@ 2020-12-08 16:08 ` Arnd Bergmann
2020-12-08 16:08 ` Arnd Bergmann
1 sibling, 1 reply; 20+ messages in thread
From: Arnd Bergmann @ 2020-12-08 16:08 UTC (permalink / raw)
To: Florian Fainelli, soc
Cc: Arnd Bergmann, Lee Jones, khilman, linux-arm-kernel,
bcm-kernel-feedback-list, olof
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 28 Nov 2020 08:34:10 -0800, Florian Fainelli wrote:
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
>
> Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/drivers
>
> [...]
Merged into arm/drivers, thanks!
merge commit: e9ab9c337beecd41f4cc98d536cd6299264d818f
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 5/5] Broadcom drivers changes for 5.11
2020-12-08 16:08 ` Arnd Bergmann
@ 2020-12-08 16:08 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2020-12-08 16:08 UTC (permalink / raw)
To: Florian Fainelli, soc
Cc: Arnd Bergmann, khilman, bcm-kernel-feedback-list, olof,
Lee Jones, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 28 Nov 2020 08:34:10 -0800, Florian Fainelli wrote:
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
>
> Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/drivers
>
> [...]
Merged into arm/drivers, thanks!
merge commit: e9ab9c337beecd41f4cc98d536cd6299264d818f
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/5] Broadcom defconfig changes for 5.11
2020-11-28 16:34 [GIT PULL 1/5] Broadcom defconfig changes for 5.11 Florian Fainelli
` (4 preceding siblings ...)
2020-11-28 16:34 ` [GIT PULL 5/5] Broadcom drivers " Florian Fainelli
@ 2020-12-08 16:34 ` Arnd Bergmann
2020-12-08 16:34 ` Arnd Bergmann
5 siblings, 1 reply; 20+ messages in thread
From: Arnd Bergmann @ 2020-12-08 16:34 UTC (permalink / raw)
To: Florian Fainelli, soc
Cc: Arnd Bergmann, khilman, bcm-kernel-feedback-list, olof,
linux-arm-kernel, Sudeep Holla
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 28 Nov 2020 08:34:06 -0800, Florian Fainelli wrote:
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
>
> Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/defconfig
>
> [...]
Merged into arm/defconfig, thanks!
merge commit: 6f7cdd2fbfffbeb9de3d2bd1855c2ef72f0e7ef0
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 1/5] Broadcom defconfig changes for 5.11
2020-12-08 16:34 ` [GIT PULL 1/5] Broadcom defconfig " Arnd Bergmann
@ 2020-12-08 16:34 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2020-12-08 16:34 UTC (permalink / raw)
To: Florian Fainelli, soc
Cc: Arnd Bergmann, khilman, bcm-kernel-feedback-list, Sudeep Holla,
olof, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 28 Nov 2020 08:34:06 -0800, Florian Fainelli wrote:
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
>
> Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/defconfig
>
> [...]
Merged into arm/defconfig, thanks!
merge commit: 6f7cdd2fbfffbeb9de3d2bd1855c2ef72f0e7ef0
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 2/5] Broadcom defconfig-arm64 changes for 5.11
2020-11-28 16:34 ` [GIT PULL 2/5] Broadcom defconfig-arm64 " Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
@ 2020-12-08 16:34 ` Arnd Bergmann
2020-12-08 16:34 ` Arnd Bergmann
1 sibling, 1 reply; 20+ messages in thread
From: Arnd Bergmann @ 2020-12-08 16:34 UTC (permalink / raw)
To: Florian Fainelli, soc
Cc: Arnd Bergmann, khilman, bcm-kernel-feedback-list, olof,
Sudeep Holla, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 28 Nov 2020 08:34:07 -0800, Florian Fainelli wrote:
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
>
> Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/defconfig-arm64
>
> [...]
Merged into arm/defconfig, thanks!
merge commit: 0f4b0b479b3566a2d61ede6e02c01a81454a0ddf
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 2/5] Broadcom defconfig-arm64 changes for 5.11
2020-12-08 16:34 ` Arnd Bergmann
@ 2020-12-08 16:34 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2020-12-08 16:34 UTC (permalink / raw)
To: Florian Fainelli, soc
Cc: Arnd Bergmann, khilman, bcm-kernel-feedback-list, Sudeep Holla,
olof, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 28 Nov 2020 08:34:07 -0800, Florian Fainelli wrote:
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
>
> Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/defconfig-arm64
>
> [...]
Merged into arm/defconfig, thanks!
merge commit: 0f4b0b479b3566a2d61ede6e02c01a81454a0ddf
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 3/5] Broadcom devicetree changes for 5.11
2020-11-28 16:34 ` [GIT PULL 3/5] Broadcom devicetree " Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
@ 2020-12-08 23:09 ` Arnd Bergmann
2020-12-08 23:09 ` Arnd Bergmann
1 sibling, 1 reply; 20+ messages in thread
From: Arnd Bergmann @ 2020-12-08 23:09 UTC (permalink / raw)
To: soc, Florian Fainelli
Cc: Arnd Bergmann, linux-arm-kernel, Kurt Kanzenbach, Pavel Hofman,
khilman, bcm-kernel-feedback-list, Vivek Unune, Maxime Ripard,
Vladimir Oltean, Nicolas Saenz Julienne, Serge Semin,
Jonathan Cameron, olof, Rob Herring, kernel test robot,
Rafał Miłecki, Phil Elwell, Krzysztof Kozlowski
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 28 Nov 2020 08:34:08 -0800, Florian Fainelli wrote:
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
>
> Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/devicetree
>
> [...]
Merged into arm/dt, thanks!
merge commit: c8b53b1c6b9330ebee782ca28cc824fec50064de
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 3/5] Broadcom devicetree changes for 5.11
2020-12-08 23:09 ` Arnd Bergmann
@ 2020-12-08 23:09 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2020-12-08 23:09 UTC (permalink / raw)
To: soc, Florian Fainelli
Cc: Rob Herring, kernel test robot, Arnd Bergmann, khilman,
Pavel Hofman, Krzysztof Kozlowski, Serge Semin,
Nicolas Saenz Julienne, bcm-kernel-feedback-list, Vivek Unune,
Rafał Miłecki, Jonathan Cameron, olof, Kurt Kanzenbach,
Vladimir Oltean, Phil Elwell, linux-arm-kernel, Maxime Ripard
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 28 Nov 2020 08:34:08 -0800, Florian Fainelli wrote:
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
>
> Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/devicetree
>
> [...]
Merged into arm/dt, thanks!
merge commit: c8b53b1c6b9330ebee782ca28cc824fec50064de
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 4/5] Broadcom devicetree-arm64 changes for 5.11
2020-11-28 16:34 ` [GIT PULL 4/5] Broadcom devicetree-arm64 " Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
@ 2020-12-08 23:09 ` Arnd Bergmann
2020-12-08 23:09 ` Arnd Bergmann
1 sibling, 1 reply; 20+ messages in thread
From: Arnd Bergmann @ 2020-12-08 23:09 UTC (permalink / raw)
To: soc, Florian Fainelli
Cc: Arnd Bergmann, linux-arm-kernel, khilman,
bcm-kernel-feedback-list, olof, Rafał Miłecki
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 28 Nov 2020 08:34:09 -0800, Florian Fainelli wrote:
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
>
> Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/devicetree-arm64
>
> [...]
Merged into arm/dt, thanks!
merge commit: 1c202d0c5a67411b1d4a7af37d8bde8665972d34
Arnd
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [GIT PULL 4/5] Broadcom devicetree-arm64 changes for 5.11
2020-12-08 23:09 ` Arnd Bergmann
@ 2020-12-08 23:09 ` Arnd Bergmann
0 siblings, 0 replies; 20+ messages in thread
From: Arnd Bergmann @ 2020-12-08 23:09 UTC (permalink / raw)
To: soc, Florian Fainelli
Cc: Arnd Bergmann, khilman, Rafał Miłecki,
bcm-kernel-feedback-list, olof, linux-arm-kernel
From: Arnd Bergmann <arnd@arndb.de>
On Sat, 28 Nov 2020 08:34:09 -0800, Florian Fainelli wrote:
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
>
> Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
>
> are available in the Git repository at:
>
> https://github.com/Broadcom/stblinux.git tags/arm-soc/for-5.11/devicetree-arm64
>
> [...]
Merged into arm/dt, thanks!
merge commit: 1c202d0c5a67411b1d4a7af37d8bde8665972d34
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2020-12-08 23:12 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-28 16:34 [GIT PULL 1/5] Broadcom defconfig changes for 5.11 Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
2020-11-28 16:34 ` [GIT PULL 2/5] Broadcom defconfig-arm64 " Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
2020-12-08 16:34 ` Arnd Bergmann
2020-12-08 16:34 ` Arnd Bergmann
2020-11-28 16:34 ` [GIT PULL 3/5] Broadcom devicetree " Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
2020-12-08 23:09 ` Arnd Bergmann
2020-12-08 23:09 ` Arnd Bergmann
2020-11-28 16:34 ` [GIT PULL 4/5] Broadcom devicetree-arm64 " Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
2020-12-08 23:09 ` Arnd Bergmann
2020-12-08 23:09 ` Arnd Bergmann
2020-11-28 16:34 ` [GIT PULL 5/5] Broadcom drivers " Florian Fainelli
2020-11-28 16:34 ` Florian Fainelli
2020-12-08 16:08 ` Arnd Bergmann
2020-12-08 16:08 ` Arnd Bergmann
2020-12-08 16:34 ` [GIT PULL 1/5] Broadcom defconfig " Arnd Bergmann
2020-12-08 16:34 ` Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).