From: Lukasz Majewski <lukma@denx.de> To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org> Cc: soc@kernel.org, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Lukasz Majewski <lukma@denx.de> Subject: [PATCH v3] ARM: dts: imx28: Add DTS description of imx28 based XEA board Date: Tue, 18 May 2021 16:28:57 +0200 [thread overview] Message-ID: <20210518142857.26170-1-lukma@denx.de> (raw) This patch adds DTS definition of the imx278 based XEA board. Signed-off-by: Lukasz Majewski <lukma@denx.de> --- Changes for v3: - Remove meaningless 'regulator-always-on' and 'enable-active-high' - Provide proper order for ssp{023} - Change memory start address to @40000000 Changes for v2: - Fix 'memory' node and remove regulators subnode - Rename 'flash0: s25fl256s0@0' to flash@0 - Add proper compatible for XEA board --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/imx28-lwe.dtsi | 170 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx28-xea.dts | 99 ++++++++++++++++++ 3 files changed, 271 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/imx28-lwe.dtsi create mode 100644 arch/arm/boot/dts/imx28-xea.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8e5d4ab4e75e..d2398a090e4d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -721,7 +721,8 @@ dtb-$(CONFIG_ARCH_MXS) += \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-ts4600.dtb \ - imx28-tx28.dtb + imx28-tx28.dtb \ + imx28-xea.dtb dtb-$(CONFIG_ARCH_NOMADIK) += \ ste-nomadik-s8815.dtb \ ste-nomadik-nhk15.dtb diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi b/arch/arm/boot/dts/imx28-lwe.dtsi new file mode 100644 index 000000000000..bb971e660db8 --- /dev/null +++ b/arch/arm/boot/dts/imx28-lwe.dtsi @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2021 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28.dtsi" + +/ { + aliases { + spi2 = &ssp3; + }; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1"; + }; + + memory@40000000 { + reg = <0x40000000 0x08000000>; + }; + + reg_3v3: regulator-reg-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_5v: regulator-reg-usb-5v { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_fec_3v3: regulator-reg-fec-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec-phy"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + #sound-dai-cells = <0>; + assigned-clocks = <&clks 53>; + assigned-clock-rates = <12000000>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&spi3_pins_a { + fsl,pinmux-ids = < + MX28_PAD_AUART2_RX__SSP3_D4 + MX28_PAD_AUART2_TX__SSP3_D5 + MX28_PAD_SSP3_SCK__SSP3_SCK + MX28_PAD_SSP3_MOSI__SSP3_CMD + MX28_PAD_SSP3_MISO__SSP3_D0 + MX28_PAD_SSP3_SS0__SSP3_D3 + MX28_PAD_AUART2_TX__GPIO_3_9 + >; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a>; + bus-width = <8>; + vmmc-supply = <®_3v3>; + non-removable; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&ssp3 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_a>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0 0x80000>; + read-only; + }; + + partition@80000 { + label = "env0"; + reg = <0x80000 0x10000>; + }; + + partition@90000 { + label = "env1"; + reg = <0x90000 0x10000>; + }; + + partition@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + + partition@500000 { + label = "swupdate"; + reg = <0x500000 0x800000>; + }; + }; + }; +}; + +&usb0 { + vbus-supply = <®_usb_5v>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>; + dr_mode = "host"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb_5v>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_b>; + dr_mode = "host"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-xea.dts b/arch/arm/boot/dts/imx28-xea.dts new file mode 100644 index 000000000000..a400c108f66a --- /dev/null +++ b/arch/arm/boot/dts/imx28-xea.dts @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2021 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28-lwe.dtsi" + +/ { + compatible = "lwn,imx28-xea", "fsl,imx28"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a &hog_pins_tiva>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_GPMI_D02__GPIO_0_2 + MX28_PAD_GPMI_D05__GPIO_0_5 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_RDY0__GPIO_0_20 + MX28_PAD_GPMI_RDY1__GPIO_0_21 + MX28_PAD_GPMI_RDY2__GPIO_0_22 + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_GPMI_CLE__GPIO_0_27 + MX28_PAD_LCD_VSYNC__GPIO_1_28 + MX28_PAD_SSP1_SCK__GPIO_2_12 + MX28_PAD_SSP1_CMD__GPIO_2_13 + MX28_PAD_SSP2_SS1__GPIO_2_20 + MX28_PAD_SSP2_SS2__GPIO_2_21 + MX28_PAD_LCD_D00__GPIO_1_0 + MX28_PAD_LCD_D01__GPIO_1_1 + MX28_PAD_LCD_D02__GPIO_1_2 + MX28_PAD_LCD_D03__GPIO_1_3 + MX28_PAD_LCD_D04__GPIO_1_4 + MX28_PAD_LCD_D05__GPIO_1_5 + MX28_PAD_LCD_D06__GPIO_1_6 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + hog_pins_tiva: hog@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY3__GPIO_0_23 + MX28_PAD_GPMI_WRN__GPIO_0_25 + >; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + hog_pins_coding: hog@2 { + reg = <2>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D01__GPIO_0_1 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D04__GPIO_0_4 + MX28_PAD_GPMI_D06__GPIO_0_6 + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +®_fec_3v3 { + gpio = <&gpio0 0 0>; +}; + +®_usb_5v { + gpio = <&gpio0 2 0>; +}; + +&spi2_pins_a { + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__SSP2_SCK + MX28_PAD_SSP2_MOSI__SSP2_CMD + MX28_PAD_SSP2_MISO__SSP2_D0 + MX28_PAD_SSP2_SS0__GPIO_2_19 + >; +}; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Lukasz Majewski <lukma@denx.de> To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org> Cc: soc@kernel.org, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Lukasz Majewski <lukma@denx.de> Subject: [PATCH v3] ARM: dts: imx28: Add DTS description of imx28 based XEA board Date: Tue, 18 May 2021 16:28:57 +0200 [thread overview] Message-ID: <20210518142857.26170-1-lukma@denx.de> (raw) Message-ID: <20210518142857.cNhlhIMcK2S1pODvRj0ETfV3o4GRPJKTxolFKWn1PUc@z> (raw) This patch adds DTS definition of the imx278 based XEA board. Signed-off-by: Lukasz Majewski <lukma@denx.de> --- Changes for v3: - Remove meaningless 'regulator-always-on' and 'enable-active-high' - Provide proper order for ssp{023} - Change memory start address to @40000000 Changes for v2: - Fix 'memory' node and remove regulators subnode - Rename 'flash0: s25fl256s0@0' to flash@0 - Add proper compatible for XEA board --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/imx28-lwe.dtsi | 170 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx28-xea.dts | 99 ++++++++++++++++++ 3 files changed, 271 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/imx28-lwe.dtsi create mode 100644 arch/arm/boot/dts/imx28-xea.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8e5d4ab4e75e..d2398a090e4d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -721,7 +721,8 @@ dtb-$(CONFIG_ARCH_MXS) += \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-ts4600.dtb \ - imx28-tx28.dtb + imx28-tx28.dtb \ + imx28-xea.dtb dtb-$(CONFIG_ARCH_NOMADIK) += \ ste-nomadik-s8815.dtb \ ste-nomadik-nhk15.dtb diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi b/arch/arm/boot/dts/imx28-lwe.dtsi new file mode 100644 index 000000000000..bb971e660db8 --- /dev/null +++ b/arch/arm/boot/dts/imx28-lwe.dtsi @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2021 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28.dtsi" + +/ { + aliases { + spi2 = &ssp3; + }; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1"; + }; + + memory@40000000 { + reg = <0x40000000 0x08000000>; + }; + + reg_3v3: regulator-reg-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_5v: regulator-reg-usb-5v { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_fec_3v3: regulator-reg-fec-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec-phy"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + #sound-dai-cells = <0>; + assigned-clocks = <&clks 53>; + assigned-clock-rates = <12000000>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&spi3_pins_a { + fsl,pinmux-ids = < + MX28_PAD_AUART2_RX__SSP3_D4 + MX28_PAD_AUART2_TX__SSP3_D5 + MX28_PAD_SSP3_SCK__SSP3_SCK + MX28_PAD_SSP3_MOSI__SSP3_CMD + MX28_PAD_SSP3_MISO__SSP3_D0 + MX28_PAD_SSP3_SS0__SSP3_D3 + MX28_PAD_AUART2_TX__GPIO_3_9 + >; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a>; + bus-width = <8>; + vmmc-supply = <®_3v3>; + non-removable; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&ssp3 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_a>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0 0x80000>; + read-only; + }; + + partition@80000 { + label = "env0"; + reg = <0x80000 0x10000>; + }; + + partition@90000 { + label = "env1"; + reg = <0x90000 0x10000>; + }; + + partition@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + + partition@500000 { + label = "swupdate"; + reg = <0x500000 0x800000>; + }; + }; + }; +}; + +&usb0 { + vbus-supply = <®_usb_5v>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>; + dr_mode = "host"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb_5v>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_b>; + dr_mode = "host"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-xea.dts b/arch/arm/boot/dts/imx28-xea.dts new file mode 100644 index 000000000000..a400c108f66a --- /dev/null +++ b/arch/arm/boot/dts/imx28-xea.dts @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2021 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28-lwe.dtsi" + +/ { + compatible = "lwn,imx28-xea", "fsl,imx28"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a &hog_pins_tiva>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_GPMI_D02__GPIO_0_2 + MX28_PAD_GPMI_D05__GPIO_0_5 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_RDY0__GPIO_0_20 + MX28_PAD_GPMI_RDY1__GPIO_0_21 + MX28_PAD_GPMI_RDY2__GPIO_0_22 + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_GPMI_CLE__GPIO_0_27 + MX28_PAD_LCD_VSYNC__GPIO_1_28 + MX28_PAD_SSP1_SCK__GPIO_2_12 + MX28_PAD_SSP1_CMD__GPIO_2_13 + MX28_PAD_SSP2_SS1__GPIO_2_20 + MX28_PAD_SSP2_SS2__GPIO_2_21 + MX28_PAD_LCD_D00__GPIO_1_0 + MX28_PAD_LCD_D01__GPIO_1_1 + MX28_PAD_LCD_D02__GPIO_1_2 + MX28_PAD_LCD_D03__GPIO_1_3 + MX28_PAD_LCD_D04__GPIO_1_4 + MX28_PAD_LCD_D05__GPIO_1_5 + MX28_PAD_LCD_D06__GPIO_1_6 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + hog_pins_tiva: hog@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY3__GPIO_0_23 + MX28_PAD_GPMI_WRN__GPIO_0_25 + >; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + hog_pins_coding: hog@2 { + reg = <2>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D01__GPIO_0_1 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D04__GPIO_0_4 + MX28_PAD_GPMI_D06__GPIO_0_6 + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +®_fec_3v3 { + gpio = <&gpio0 0 0>; +}; + +®_usb_5v { + gpio = <&gpio0 2 0>; +}; + +&spi2_pins_a { + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__SSP2_SCK + MX28_PAD_SSP2_MOSI__SSP2_CMD + MX28_PAD_SSP2_MISO__SSP2_D0 + MX28_PAD_SSP2_SS0__GPIO_2_19 + >; +}; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-05-18 14:29 UTC|newest] Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-18 14:28 Lukasz Majewski [this message] 2021-05-18 14:28 ` [PATCH v3] ARM: dts: imx28: Add DTS description of imx28 based XEA board Lukasz Majewski 2021-05-22 12:37 ` Shawn Guo 2021-05-22 12:37 ` Shawn Guo 2021-06-15 16:00 ` patchwork-bot+linux-soc
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210518142857.26170-1-lukma@denx.de \ --to=lukma@denx.de \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=soc@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).