soc.lore.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/3] Add devicetree support for SDX65 Modem and MTP
@ 2021-07-22 21:16 quic_vamslank
  2021-07-22 21:16 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Document SDX65 platform and boards quic_vamslank
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: quic_vamslank @ 2021-07-22 21:16 UTC (permalink / raw)
  To: agross, bjorn.andersson, olof, soc, linus.walleij, sboyd, robh+dt
  Cc: linux-arm-msm, linux-kernel, devicetree, linux-gpio, Vamsi Krishna Lanka

From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>

Hello,

Changes from v1:
 - Addressed Bjorn's comments 

This series adds devicetree support for Qualcomm SDX65 platform and MTP
board. This series functionally depends on Add Pdc, GCC and RPMh Clock support
series [1] and Add pinctrl support for SDX65 [2] which are under review.

With this current devicetree support, the MTP can boot into initramfs
shell.

Thanks,
Vamsi

Vamsi krishna Lanka (3):
  dt-bindings: arm: qcom: Document SDX65 platform and boards
  ARM: dts: qcom: Add SDX65 platform and MTP board support
  ARM: dts: qcom: sdx65: Add pincontrol node

 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 arch/arm/boot/dts/Makefile                    |   3 +-
 arch/arm/boot/dts/qcom-sdx65-mtp.dts          |  25 +++
 arch/arm/boot/dts/qcom-sdx65.dtsi             | 210 ++++++++++++++++++
 4 files changed, 243 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/qcom-sdx65-mtp.dts
 create mode 100644 arch/arm/boot/dts/qcom-sdx65.dtsi

-- 
2.32.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 1/3] dt-bindings: arm: qcom: Document SDX65 platform and boards
  2021-07-22 21:16 [PATCH v2 0/3] Add devicetree support for SDX65 Modem and MTP quic_vamslank
@ 2021-07-22 21:16 ` quic_vamslank
  2021-07-22 21:24   ` quic_vamslank
  2021-07-22 21:16 ` [PATCH v2 2/3] ARM: dts: qcom: Add SDX65 platform and MTP board support quic_vamslank
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 8+ messages in thread
From: quic_vamslank @ 2021-07-22 21:16 UTC (permalink / raw)
  To: agross, bjorn.andersson, olof, soc, linus.walleij, sboyd, robh+dt
  Cc: linux-arm-msm, linux-kernel, devicetree, linux-gpio,
	Vamsi krishna Lanka, Rob Herring

From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>

Document the SDX65 platform binding and also the boards using it.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 174134f920e1..bdf1da8fc557 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -41,6 +41,7 @@ description: |
         sdm660
         sdm845
         sdx55
+        sdx65
         sm8250
         sm8350
 
@@ -174,6 +175,11 @@ properties:
               - qcom,sdx55-mtp
           - const: qcom,sdx55
 
+      - items:
+          - enum:
+              - qcom,sdx65-mtp
+          - const: qcom,sdx65
+
       - items:
           - enum:
               - qcom,ipq6018-cp01-c1
-- 
2.32.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 2/3] ARM: dts: qcom: Add SDX65 platform and MTP board support
  2021-07-22 21:16 [PATCH v2 0/3] Add devicetree support for SDX65 Modem and MTP quic_vamslank
  2021-07-22 21:16 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Document SDX65 platform and boards quic_vamslank
@ 2021-07-22 21:16 ` quic_vamslank
  2021-07-22 21:24   ` quic_vamslank
  2021-07-22 21:16 ` [PATCH v2 3/3] ARM: dts: qcom: sdx65: Add pincontrol node quic_vamslank
  2021-07-22 21:24 ` [PATCH v2 0/3] Add devicetree support for SDX65 Modem and MTP quic_vamslank
  3 siblings, 1 reply; 8+ messages in thread
From: quic_vamslank @ 2021-07-22 21:16 UTC (permalink / raw)
  To: agross, bjorn.andersson, olof, soc, linus.walleij, sboyd, robh+dt
  Cc: linux-arm-msm, linux-kernel, devicetree, linux-gpio, Vamsi krishna Lanka

From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>

Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..

This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
---
 arch/arm/boot/dts/Makefile           |   3 +-
 arch/arm/boot/dts/qcom-sdx65-mtp.dts |  25 ++++
 arch/arm/boot/dts/qcom-sdx65.dtsi    | 198 +++++++++++++++++++++++++++
 3 files changed, 225 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/qcom-sdx65-mtp.dts
 create mode 100644 arch/arm/boot/dts/qcom-sdx65.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8e5d4ab4e75e..1e3f01496cb3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -929,7 +929,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8974-sony-xperia-castor.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb \
 	qcom-mdm9615-wp8548-mangoh-green.dtb \
-	qcom-sdx55-mtp.dtb
+	qcom-sdx55-mtp.dtb \
+	qcom-sdx65-mtp.dtb
 dtb-$(CONFIG_ARCH_RDA) += \
 	rda8810pl-orangepi-2g-iot.dtb \
 	rda8810pl-orangepi-i96.dtb
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
new file mode 100644
index 000000000000..59457da8e5f1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "qcom-sdx65.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDX65 MTP";
+	compatible = "qcom,sdx65-mtp", "qcom,sdx65";
+	qcom,board-id = <0x2010008 0x302>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart3 {
+	status = "ok";
+};
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
new file mode 100644
index 000000000000..fb240213cc35
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX65 SoC device tree source
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdx65.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
+	interrupt-parent = <&intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			clock-output-names = "xo_board";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdx65";
+			reg = <0x00100000 0x001f7400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		blsp1_uart3: serial@831000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x00831000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		pdc: interrupt-controller@b210000 {
+			compatible = "qcom,sdx65-pdc", "qcom,pdc";
+			reg = <0xb210000 0x10000>;
+			qcom,pdc-ranges = <0 147 52>, <52 266 32>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		intc: interrupt-controller@17800000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <3>;
+			reg = <0x17800000 0x1000>,
+			      <0x17802000 0x1000>;
+		};
+
+		timer@17820000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17820000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17821000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 7 0x4>,
+					     <GIC_SPI 6 0x4>;
+				reg = <0x17821000 0x1000>,
+				      <0x17822000 0x1000>;
+			};
+
+			frame@17823000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 8 0x4>;
+				reg = <0x17823000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17824000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 9 0x4>;
+				reg = <0x17824000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17825000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 10 0x4>;
+				reg = <0x17825000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17826000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 11 0x4>;
+				reg = <0x17826000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17827000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 12 0x4>;
+				reg = <0x17827000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17828000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 13 0x4>;
+				reg = <0x17828000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17829000 {
+				frame-number = <7>;
+				interrupts = <GIC_SPI 14 0x4>;
+				reg = <0x17829000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17830000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x17830000 0x10000>,
+			    <0x17840000 0x10000>;
+			reg-names = "drv-0", "drv-1";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <1>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+				<SLEEP_TCS   2>,
+				<WAKE_TCS    2>,
+				<CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller@1 {
+				compatible = "qcom,sdx65-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			<1 12 0xf08>,
+			<1 10 0xf08>,
+			<1 11 0xf08>;
+		clock-frequency = <19200000>;
+	};
+};
-- 
2.32.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 3/3] ARM: dts: qcom: sdx65: Add pincontrol node
  2021-07-22 21:16 [PATCH v2 0/3] Add devicetree support for SDX65 Modem and MTP quic_vamslank
  2021-07-22 21:16 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Document SDX65 platform and boards quic_vamslank
  2021-07-22 21:16 ` [PATCH v2 2/3] ARM: dts: qcom: Add SDX65 platform and MTP board support quic_vamslank
@ 2021-07-22 21:16 ` quic_vamslank
  2021-07-22 21:24   ` quic_vamslank
  2021-07-22 21:24 ` [PATCH v2 0/3] Add devicetree support for SDX65 Modem and MTP quic_vamslank
  3 siblings, 1 reply; 8+ messages in thread
From: quic_vamslank @ 2021-07-22 21:16 UTC (permalink / raw)
  To: agross, bjorn.andersson, olof, soc, linus.walleij, sboyd, robh+dt
  Cc: linux-arm-msm, linux-kernel, devicetree, linux-gpio, Vamsi krishna Lanka

From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>

This commit adds pincontrol node to SDX65 dts.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index fb240213cc35..db269c73c0e9 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -79,6 +79,18 @@ blsp1_uart3: serial@831000 {
 			status = "disabled";
 		};
 
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sdx65-tlmm";
+			reg = <0xf100000 0x300000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 109>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+		};
+
 		pdc: interrupt-controller@b210000 {
 			compatible = "qcom,sdx65-pdc", "qcom,pdc";
 			reg = <0xb210000 0x10000>;
-- 
2.32.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 0/3] Add devicetree support for SDX65 Modem and MTP
  2021-07-22 21:16 [PATCH v2 0/3] Add devicetree support for SDX65 Modem and MTP quic_vamslank
                   ` (2 preceding siblings ...)
  2021-07-22 21:16 ` [PATCH v2 3/3] ARM: dts: qcom: sdx65: Add pincontrol node quic_vamslank
@ 2021-07-22 21:24 ` quic_vamslank
  3 siblings, 0 replies; 8+ messages in thread
From: quic_vamslank @ 2021-07-22 21:24 UTC (permalink / raw)
  To: agross, bjorn.andersson, olof, soc, linus.walleij, robh+dt
  Cc: linux-arm-msm, linux-kernel, devicetree, linux-gpio, Vamsi Krishna Lanka

From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>

Hello,

Changes from v1:
 - Addressed Bjorn's comments 

This series adds devicetree support for Qualcomm SDX65 platform and MTP
board. This series functionally depends on Add Pdc, GCC and RPMh Clock support
series [1] and Add pinctrl support for SDX65 [2] which are under review.

With this current devicetree support, the MTP can boot into initramfs
shell.

Thanks,
Vamsi

Vamsi krishna Lanka (3):
  dt-bindings: arm: qcom: Document SDX65 platform and boards
  ARM: dts: qcom: Add SDX65 platform and MTP board support
  ARM: dts: qcom: sdx65: Add pincontrol node

 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 arch/arm/boot/dts/Makefile                    |   3 +-
 arch/arm/boot/dts/qcom-sdx65-mtp.dts          |  25 +++
 arch/arm/boot/dts/qcom-sdx65.dtsi             | 210 ++++++++++++++++++
 4 files changed, 243 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/qcom-sdx65-mtp.dts
 create mode 100644 arch/arm/boot/dts/qcom-sdx65.dtsi

-- 
2.32.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 1/3] dt-bindings: arm: qcom: Document SDX65 platform and boards
  2021-07-22 21:16 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Document SDX65 platform and boards quic_vamslank
@ 2021-07-22 21:24   ` quic_vamslank
  0 siblings, 0 replies; 8+ messages in thread
From: quic_vamslank @ 2021-07-22 21:24 UTC (permalink / raw)
  To: agross, bjorn.andersson, olof, soc, linus.walleij, robh+dt
  Cc: linux-arm-msm, linux-kernel, devicetree, linux-gpio,
	Vamsi krishna Lanka, Rob Herring

From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>

Document the SDX65 platform binding and also the boards using it.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 174134f920e1..bdf1da8fc557 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -41,6 +41,7 @@ description: |
         sdm660
         sdm845
         sdx55
+        sdx65
         sm8250
         sm8350
 
@@ -174,6 +175,11 @@ properties:
               - qcom,sdx55-mtp
           - const: qcom,sdx55
 
+      - items:
+          - enum:
+              - qcom,sdx65-mtp
+          - const: qcom,sdx65
+
       - items:
           - enum:
               - qcom,ipq6018-cp01-c1
-- 
2.32.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 2/3] ARM: dts: qcom: Add SDX65 platform and MTP board support
  2021-07-22 21:16 ` [PATCH v2 2/3] ARM: dts: qcom: Add SDX65 platform and MTP board support quic_vamslank
@ 2021-07-22 21:24   ` quic_vamslank
  0 siblings, 0 replies; 8+ messages in thread
From: quic_vamslank @ 2021-07-22 21:24 UTC (permalink / raw)
  To: agross, bjorn.andersson, olof, soc, linus.walleij, robh+dt
  Cc: linux-arm-msm, linux-kernel, devicetree, linux-gpio, Vamsi krishna Lanka

From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>

Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..

This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
---
 arch/arm/boot/dts/Makefile           |   3 +-
 arch/arm/boot/dts/qcom-sdx65-mtp.dts |  25 ++++
 arch/arm/boot/dts/qcom-sdx65.dtsi    | 198 +++++++++++++++++++++++++++
 3 files changed, 225 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/qcom-sdx65-mtp.dts
 create mode 100644 arch/arm/boot/dts/qcom-sdx65.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8e5d4ab4e75e..1e3f01496cb3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -929,7 +929,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8974-sony-xperia-castor.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb \
 	qcom-mdm9615-wp8548-mangoh-green.dtb \
-	qcom-sdx55-mtp.dtb
+	qcom-sdx55-mtp.dtb \
+	qcom-sdx65-mtp.dtb
 dtb-$(CONFIG_ARCH_RDA) += \
 	rda8810pl-orangepi-2g-iot.dtb \
 	rda8810pl-orangepi-i96.dtb
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
new file mode 100644
index 000000000000..59457da8e5f1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "qcom-sdx65.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDX65 MTP";
+	compatible = "qcom,sdx65-mtp", "qcom,sdx65";
+	qcom,board-id = <0x2010008 0x302>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart3 {
+	status = "ok";
+};
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
new file mode 100644
index 000000000000..fb240213cc35
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX65 SoC device tree source
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdx65.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
+	interrupt-parent = <&intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			clock-output-names = "xo_board";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdx65";
+			reg = <0x00100000 0x001f7400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		blsp1_uart3: serial@831000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x00831000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		pdc: interrupt-controller@b210000 {
+			compatible = "qcom,sdx65-pdc", "qcom,pdc";
+			reg = <0xb210000 0x10000>;
+			qcom,pdc-ranges = <0 147 52>, <52 266 32>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		intc: interrupt-controller@17800000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <3>;
+			reg = <0x17800000 0x1000>,
+			      <0x17802000 0x1000>;
+		};
+
+		timer@17820000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17820000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17821000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 7 0x4>,
+					     <GIC_SPI 6 0x4>;
+				reg = <0x17821000 0x1000>,
+				      <0x17822000 0x1000>;
+			};
+
+			frame@17823000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 8 0x4>;
+				reg = <0x17823000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17824000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 9 0x4>;
+				reg = <0x17824000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17825000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 10 0x4>;
+				reg = <0x17825000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17826000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 11 0x4>;
+				reg = <0x17826000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17827000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 12 0x4>;
+				reg = <0x17827000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17828000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 13 0x4>;
+				reg = <0x17828000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17829000 {
+				frame-number = <7>;
+				interrupts = <GIC_SPI 14 0x4>;
+				reg = <0x17829000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17830000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x17830000 0x10000>,
+			    <0x17840000 0x10000>;
+			reg-names = "drv-0", "drv-1";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <1>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+				<SLEEP_TCS   2>,
+				<WAKE_TCS    2>,
+				<CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller@1 {
+				compatible = "qcom,sdx65-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			<1 12 0xf08>,
+			<1 10 0xf08>,
+			<1 11 0xf08>;
+		clock-frequency = <19200000>;
+	};
+};
-- 
2.32.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 3/3] ARM: dts: qcom: sdx65: Add pincontrol node
  2021-07-22 21:16 ` [PATCH v2 3/3] ARM: dts: qcom: sdx65: Add pincontrol node quic_vamslank
@ 2021-07-22 21:24   ` quic_vamslank
  0 siblings, 0 replies; 8+ messages in thread
From: quic_vamslank @ 2021-07-22 21:24 UTC (permalink / raw)
  To: agross, bjorn.andersson, olof, soc, linus.walleij, robh+dt
  Cc: linux-arm-msm, linux-kernel, devicetree, linux-gpio, Vamsi krishna Lanka

From: Vamsi krishna Lanka <quic_vamslank@quicinc.com>

This commit adds pincontrol node to SDX65 dts.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
---
 arch/arm/boot/dts/qcom-sdx65.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index fb240213cc35..db269c73c0e9 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -79,6 +79,18 @@ blsp1_uart3: serial@831000 {
 			status = "disabled";
 		};
 
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sdx65-tlmm";
+			reg = <0xf100000 0x300000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 109>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+		};
+
 		pdc: interrupt-controller@b210000 {
 			compatible = "qcom,sdx65-pdc", "qcom,pdc";
 			reg = <0xb210000 0x10000>;
-- 
2.32.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2021-07-22 21:24 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-22 21:16 [PATCH v2 0/3] Add devicetree support for SDX65 Modem and MTP quic_vamslank
2021-07-22 21:16 ` [PATCH v2 1/3] dt-bindings: arm: qcom: Document SDX65 platform and boards quic_vamslank
2021-07-22 21:24   ` quic_vamslank
2021-07-22 21:16 ` [PATCH v2 2/3] ARM: dts: qcom: Add SDX65 platform and MTP board support quic_vamslank
2021-07-22 21:24   ` quic_vamslank
2021-07-22 21:16 ` [PATCH v2 3/3] ARM: dts: qcom: sdx65: Add pincontrol node quic_vamslank
2021-07-22 21:24   ` quic_vamslank
2021-07-22 21:24 ` [PATCH v2 0/3] Add devicetree support for SDX65 Modem and MTP quic_vamslank

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).