From: Matthew Hagan <mnhagan88@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Matthew Hagan <mnhagan88@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>,
soc@kernel.org, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com,
Krzysztof Kozlowski <krzk@kernel.org>,
Sam Ravnborg <sam@ravnborg.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65
Date: Fri, 6 Aug 2021 21:44:32 +0100 [thread overview]
Message-ID: <20210806204446.2981299-2-mnhagan88@gmail.com> (raw)
In-Reply-To: <20210806204446.2981299-1-mnhagan88@gmail.com>
These bindings are required for all Meraki MX64/MX65 devices. These
common bindings include memory (2GB), PWM LEDs, AMAC, I2C (AT24), NAND
partitions, EHCI, OHCI and pinctrl.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++++++++++++
1 file changed, 129 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..bcdd38954f1d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led-1 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ pwms = <&pwm 1 50000>;
+ max-brightness = <255>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ pwms = <&pwm 2 50000>;
+ max-brightness = <255>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ pwms = <&pwm 3 50000>;
+ max-brightness = <255>;
+ };
+ };
+};
+
+&amac2 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ at24@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ read-only;
+ };
+};
+
+&nand_controller {
+ nand@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "shmoo";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "bootkernel1";
+ reg = <0x100000 0x300000>;
+ };
+
+ partition@400000 {
+ label = "nvram";
+ reg = <0x400000 0x100000>;
+ };
+
+ partition@500000 {
+ label = "bootkernel2";
+ reg = <0x500000 0x300000>;
+ };
+
+ partition@800000 {
+ label = "ubi";
+ reg = <0x800000 0x3f700000>;
+ };
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_leds>;
+
+ pwm_leds: pwm_leds {
+ function = "pwm";
+ groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+ };
+};
+
+&pwm {
+ status = "okay";
+ #pwm-cells = <2>;
+};
+
+&uart0 {
+ clock-frequency = <62500000>;
+ status = "okay";
+};
--
2.26.3
WARNING: multiple messages have this Message-ID (diff)
From: Matthew Hagan <mnhagan88@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Vladimir Oltean <olteanv@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Matthew Hagan <mnhagan88@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>,
soc@kernel.org, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com,
Krzysztof Kozlowski <krzk@kernel.org>,
Sam Ravnborg <sam@ravnborg.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65
Date: Fri, 6 Aug 2021 21:44:32 +0100 [thread overview]
Message-ID: <20210806204446.2981299-2-mnhagan88@gmail.com> (raw)
Message-ID: <20210806204432.MjsyepWKrpBDCOZ8MeBJh6oDYgnNEFjvliPR6tDt3KY@z> (raw)
In-Reply-To: <20210806204446.2981299-1-mnhagan88@gmail.com>
These bindings are required for all Meraki MX64/MX65 devices. These
common bindings include memory (2GB), PWM LEDs, AMAC, I2C (AT24), NAND
partitions, EHCI, OHCI and pinctrl.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++++++++++++
1 file changed, 129 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..bcdd38954f1d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led-1 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ pwms = <&pwm 1 50000>;
+ max-brightness = <255>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ pwms = <&pwm 2 50000>;
+ max-brightness = <255>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ pwms = <&pwm 3 50000>;
+ max-brightness = <255>;
+ };
+ };
+};
+
+&amac2 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ at24@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ read-only;
+ };
+};
+
+&nand_controller {
+ nand@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "shmoo";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "bootkernel1";
+ reg = <0x100000 0x300000>;
+ };
+
+ partition@400000 {
+ label = "nvram";
+ reg = <0x400000 0x100000>;
+ };
+
+ partition@500000 {
+ label = "bootkernel2";
+ reg = <0x500000 0x300000>;
+ };
+
+ partition@800000 {
+ label = "ubi";
+ reg = <0x800000 0x3f700000>;
+ };
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_leds>;
+
+ pwm_leds: pwm_leds {
+ function = "pwm";
+ groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+ };
+};
+
+&pwm {
+ status = "okay";
+ #pwm-cells = <2>;
+};
+
+&uart0 {
+ clock-frequency = <62500000>;
+ status = "okay";
+};
--
2.26.3
WARNING: multiple messages have this Message-ID (diff)
From: Matthew Hagan <mnhagan88@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Matthew Hagan <mnhagan88@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>,
soc@kernel.org, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com,
Krzysztof Kozlowski <krzk@kernel.org>,
Sam Ravnborg <sam@ravnborg.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65
Date: Fri, 6 Aug 2021 21:44:32 +0100 [thread overview]
Message-ID: <20210806204446.2981299-2-mnhagan88@gmail.com> (raw)
Message-ID: <20210806204432.GfZMKUNabtUOInVA2HuCiiaycdAffwiiQv0HrYQS7kk@z> (raw)
In-Reply-To: <20210806204446.2981299-1-mnhagan88@gmail.com>
These bindings are required for all Meraki MX64/MX65 devices. These
common bindings include memory (2GB), PWM LEDs, AMAC, I2C (AT24), NAND
partitions, EHCI, OHCI and pinctrl.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++++++++++++
1 file changed, 129 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..bcdd38954f1d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led-1 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ pwms = <&pwm 1 50000>;
+ max-brightness = <255>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ pwms = <&pwm 2 50000>;
+ max-brightness = <255>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ pwms = <&pwm 3 50000>;
+ max-brightness = <255>;
+ };
+ };
+};
+
+&amac2 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ at24@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ read-only;
+ };
+};
+
+&nand_controller {
+ nand@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "shmoo";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "bootkernel1";
+ reg = <0x100000 0x300000>;
+ };
+
+ partition@400000 {
+ label = "nvram";
+ reg = <0x400000 0x100000>;
+ };
+
+ partition@500000 {
+ label = "bootkernel2";
+ reg = <0x500000 0x300000>;
+ };
+
+ partition@800000 {
+ label = "ubi";
+ reg = <0x800000 0x3f700000>;
+ };
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_leds>;
+
+ pwm_leds: pwm_leds {
+ function = "pwm";
+ groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+ };
+};
+
+&pwm {
+ status = "okay";
+ #pwm-cells = <2>;
+};
+
+&uart0 {
+ clock-frequency = <62500000>;
+ status = "okay";
+};
--
2.26.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-08-06 20:45 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-06 20:44 [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan [this message]
2021-08-06 20:44 ` [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65 Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190649.HmTeb43n7OCXYh5UV6JT0bVlwlMp2VMsXjgm1UTxtgI@z>
2021-08-22 19:06 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190711.cJnZ4XoKJsnc9FibMU5flCy_ruPZUxUJGYd5yvENHN4@z>
2021-08-22 19:07 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190734.kgi8NN-ELSJMnWNu-tp3iPc6fBGikL-RonkvdqMPxaE@z>
2021-08-22 19:07 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190800.mYzyBiMhvkxqZYOm1rzCJlCE-j7ifxub6k1P_ovt2yU@z>
2021-08-22 19:08 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65 Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822191100.2DfPkuhSlxXEKn5LIA2RBAoY4Xuvqy8f7-r6t3zGnBI@z>
2021-08-22 19:11 ` Florian Fainelli
[not found] ` <20210822191157.pVC3SK9g58F0tlB82DKNu_C3JMrIOCPGhoXIBuOZFPg@z>
2021-08-22 19:11 ` [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210806204446.2981299-2-mnhagan88@gmail.com \
--to=mnhagan88@gmail.com \
--cc=arnd@arndb.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=olteanv@gmail.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=sbranden@broadcom.com \
--cc=soc@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).