[PATCH v3 00/13] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards

[PATCH v3 00/13] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards

[Artur Weber]

This patches re-introduces the Exynos4212 platform and adds support
for the Samsung Galaxy Tab 3 8.0 series of tablets that uses it:

 - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
 - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
 - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)

What works:

 - Display and backlight
 - Touchscreen (without touchkeys)
 - GPIO buttons, hall sensor
 - WiFi and Bluetooth
 - USB, fuel gauge, charging
 - Accelerometer and magnetometer
 - WiFi model only: light sensor

Display panel bindings used by the Tab3 DTSI are added in a separate
patchset - "[PATCH 0/3] Add Samsung S6D7AA0 panel controller driver":
https://lore.kernel.org/all/20230501185103.25939-1-aweber.kernel@gmail.com/

LP855X binding updates used by the Tab3 DTSI are added in a separate
patchset - "[PATCH 0/4] video: backlight: lp855x: modernize bindings":
https://lore.kernel.org/all/20230429104534.28943-1-aweber.kernel@gmail.com/

Changed in v2:
 - Added note about display panel bindings to cover letter and
   Tab3 DTSI commit

Changed in v3:
 - Addressed review comments
 - Tab3 DTS tweaks (remove broken RTC, add CPU thermal node)
 - Fixed typos in Exynos DTSIs

Artur Weber (13):
  dt-bindings: soc: samsung: add Exynos4212 PMU compatible
  dt-bindings: clock: add Exynos4212 clock compatible
  ARM: exynos: Re-introduce Exynos4212 support
  soc: samsung: Re-introduce Exynos4212 support
  clk: samsung: Add Exynos4212 compatible to CLKOUT driver
  clk: samsung: Re-add support for Exynos4212 CPU clock
  Revert "media: exynos4-is: Remove dependency on obsolete SoC support"
  Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"
  ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi
  ARM: dts: Re-introduce Exynos4212 DTSI
  ARM: dts: exynos: Fix some typos in comments
  dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards
  ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards

 .../bindings/arm/samsung/samsung-boards.yaml  |   10 +
 .../bindings/clock/samsung,exynos-clock.yaml  |    1 +
 .../bindings/soc/samsung/exynos-pmu.yaml      |    5 +
 arch/arm/boot/dts/Makefile                    |    3 +
 arch/arm/boot/dts/exynos3250-pinctrl.dtsi     |    4 +-
 arch/arm/boot/dts/exynos3250.dtsi             |    2 +-
 arch/arm/boot/dts/exynos4.dtsi                |    2 +-
 arch/arm/boot/dts/exynos4210-pinctrl.dtsi     |    4 +-
 arch/arm/boot/dts/exynos4212-tab3-3g8.dts     |   29 +
 arch/arm/boot/dts/exynos4212-tab3-lte8.dts    |   44 +
 arch/arm/boot/dts/exynos4212-tab3-wifi8.dts   |   26 +
 arch/arm/boot/dts/exynos4212-tab3.dtsi        | 1171 +++++++++++++++++
 arch/arm/boot/dts/exynos4212.dtsi             |  157 +++
 arch/arm/boot/dts/exynos4412.dtsi             |  646 +--------
 ...2-pinctrl.dtsi => exynos4x12-pinctrl.dtsi} |    6 +-
 .../dts/{exynos4412.dtsi => exynos4x12.dtsi}  |  165 +--
 arch/arm/boot/dts/exynos5.dtsi                |    2 +-
 arch/arm/boot/dts/exynos5250-pinctrl.dtsi     |    4 +-
 arch/arm/boot/dts/exynos5250.dtsi             |    2 +-
 arch/arm/boot/dts/exynos5260-pinctrl.dtsi     |    2 +-
 arch/arm/boot/dts/exynos5410.dtsi             |    2 +-
 arch/arm/boot/dts/exynos5420-pinctrl.dtsi     |    2 +-
 arch/arm/boot/dts/exynos5420.dtsi             |    2 +-
 arch/arm/boot/dts/exynos5800.dtsi             |    2 +-
 arch/arm/boot/dts/s3c6400.dtsi                |    2 +-
 arch/arm/boot/dts/s3c6410.dtsi                |    2 +-
 arch/arm/boot/dts/s3c64xx.dtsi                |    2 +-
 arch/arm/boot/dts/s5pv210-pinctrl.dtsi        |    2 +-
 arch/arm/boot/dts/s5pv210.dtsi                |    2 +-
 arch/arm/mach-exynos/Kconfig                  |    5 +
 arch/arm/mach-exynos/common.h                 |    8 +
 arch/arm/mach-exynos/exynos.c                 |    2 +
 arch/arm/mach-exynos/firmware.c               |    8 +-
 arch/arm/mach-exynos/pm.c                     |    2 +-
 arch/arm/mach-exynos/suspend.c                |    4 +
 drivers/clk/samsung/clk-exynos-clkout.c       |    3 +
 drivers/clk/samsung/clk-exynos4.c             |   44 +-
 .../media/platform/samsung/exynos4-is/Kconfig |    2 +-
 .../platform/samsung/exynos4-is/fimc-core.c   |    2 +-
 .../platform/samsung/exynos4-is/fimc-lite.c   |    2 +-
 drivers/phy/samsung/Kconfig                   |    2 +-
 drivers/soc/samsung/exynos-pmu.c              |    9 +
 drivers/soc/samsung/exynos-pmu.h              |    2 +
 drivers/soc/samsung/exynos4-pmu.c             |   13 +-
 44 files changed, 1534 insertions(+), 837 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos4212-tab3-3g8.dts
 create mode 100644 arch/arm/boot/dts/exynos4212-tab3-lte8.dts
 create mode 100644 arch/arm/boot/dts/exynos4212-tab3-wifi8.dts
 create mode 100644 arch/arm/boot/dts/exynos4212-tab3.dtsi
 create mode 100644 arch/arm/boot/dts/exynos4212.dtsi
 rename arch/arm/boot/dts/{exynos4412-pinctrl.dtsi => exynos4x12-pinctrl.dtsi} (99%)
 copy arch/arm/boot/dts/{exynos4412.dtsi => exynos4x12.dtsi} (81%)


base-commit: e154a338e16cc3b3bbd54c891253319d22383746
-- 
2.40.1

[PATCH v3 01/13] dt-bindings: soc: samsung: add Exynos4212 PMU compatible

[Artur Weber]

Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
back the relevant compatible.

This reverts part of commit c40610198f35 ("soc: samsung: Remove
Exynos4212 related dead code").

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changed in v3:
 - Added Exynos4212 compatible next to all Exynos4412 compatible
   appearances
---
 .../devicetree/bindings/soc/samsung/exynos-pmu.yaml          | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
index 5d8d9497f18e..e1d716df5dfa 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
@@ -17,6 +17,7 @@ select:
         enum:
           - samsung,exynos3250-pmu
           - samsung,exynos4210-pmu
+          - samsung,exynos4212-pmu
           - samsung,exynos4412-pmu
           - samsung,exynos5250-pmu
           - samsung,exynos5260-pmu
@@ -36,6 +37,7 @@ properties:
           - enum:
               - samsung,exynos3250-pmu
               - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
               - samsung,exynos4412-pmu
               - samsung,exynos5250-pmu
               - samsung,exynos5260-pmu
@@ -50,6 +52,7 @@ properties:
           - enum:
               - samsung,exynos3250-pmu
               - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
               - samsung,exynos4412-pmu
               - samsung,exynos5250-pmu
               - samsung,exynos5420-pmu
@@ -125,6 +128,7 @@ allOf:
             enum:
               - samsung,exynos3250-pmu
               - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
               - samsung,exynos4412-pmu
               - samsung,exynos5250-pmu
               - samsung,exynos5410-pmu
@@ -143,6 +147,7 @@ allOf:
             enum:
               - samsung,exynos3250-pmu
               - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
               - samsung,exynos4412-pmu
               - samsung,exynos5250-pmu
               - samsung,exynos5420-pmu
-- 
2.40.1

[PATCH v3 02/13] dt-bindings: clock: add Exynos4212 clock compatible

[Artur Weber]

Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
back the relevant compatible.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
 .../devicetree/bindings/clock/samsung,exynos-clock.yaml          | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
index 0589a63e273a..a36781a455b6 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
@@ -24,6 +24,7 @@ properties:
           - samsung,exynos3250-cmu-dmc
           - samsung,exynos3250-cmu-isp
           - samsung,exynos4210-clock
+          - samsung,exynos4212-clock
           - samsung,exynos4412-clock
           - samsung,exynos5250-clock
       - items:
-- 
2.40.1

[PATCH v3 03/13] ARM: exynos: Re-introduce Exynos4212 support

[Artur Weber]

Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
back the relevant code.

This reverts commit 9e43eca3c87476f75680f472ff3ebcd85f357b86.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changed in v3:
 - Reordered if statement conditionals (Exynos4212 comes before 4412)
---
 arch/arm/mach-exynos/Kconfig    | 5 +++++
 arch/arm/mach-exynos/common.h   | 8 ++++++++
 arch/arm/mach-exynos/exynos.c   | 2 ++
 arch/arm/mach-exynos/firmware.c | 8 +++++++-
 arch/arm/mach-exynos/pm.c       | 2 +-
 arch/arm/mach-exynos/suspend.c  | 4 ++++
 6 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 4d3b40e4049a..b3d5df5225fe 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -78,6 +78,11 @@ config CPU_EXYNOS4210
 	default y
 	depends on ARCH_EXYNOS4
 
+config SOC_EXYNOS4212
+	bool "Samsung Exynos4212"
+	default y
+	depends on ARCH_EXYNOS4
+
 config SOC_EXYNOS4412
 	bool "Samsung Exynos4412"
 	default y
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 29eb075b24a4..c9e85d33c309 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -15,6 +15,7 @@
 #define EXYNOS3_SOC_MASK	0xFFFFF000
 
 #define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
 #define EXYNOS4412_CPU_ID	0xE4412200
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
@@ -34,6 +35,7 @@ static inline int is_samsung_##name(void)	\
 
 IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
 IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
@@ -52,6 +54,12 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_exynos4210()	0
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
 #if defined(CONFIG_SOC_EXYNOS4412)
 # define soc_is_exynos4412()	is_samsung_exynos4412()
 #else
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 51a247ca4da8..5671621f1661 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -178,6 +178,7 @@ static void __init exynos_dt_machine_init(void)
 		exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
 #endif
 	if (of_machine_is_compatible("samsung,exynos4210") ||
+	    of_machine_is_compatible("samsung,exynos4212") ||
 	    (of_machine_is_compatible("samsung,exynos4412") &&
 	     (of_machine_is_compatible("samsung,trats2") ||
 		  of_machine_is_compatible("samsung,midas") ||
@@ -192,6 +193,7 @@ static char const *const exynos_dt_compat[] __initconst = {
 	"samsung,exynos3250",
 	"samsung,exynos4",
 	"samsung,exynos4210",
+	"samsung,exynos4212",
 	"samsung,exynos4412",
 	"samsung,exynos5",
 	"samsung,exynos5250",
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 2da5b60b59e2..a5e22678e27b 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -63,12 +63,18 @@ static int exynos_cpu_boot(int cpu)
 	 *
 	 * On Exynos5 devices the call is ignored by trustzone firmware.
 	 */
-	if (!soc_is_exynos4210() && !soc_is_exynos4412())
+	if (!soc_is_exynos4210() && !soc_is_exynos4212() &&
+	    !soc_is_exynos4412())
 		return 0;
 
 	/*
 	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+	 * But, Exynos4212 has only one secondary CPU so second parameter
+	 * isn't used for informing secure firmware about CPU id.
 	 */
+	if (soc_is_exynos4212())
+		cpu = 0;
+
 	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
 	return 0;
 }
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 30f4e55bf39e..0019d21bff90 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -161,7 +161,7 @@ void exynos_enter_aftr(void)
 
 	exynos_pm_central_suspend();
 
-	if (soc_is_exynos4412()) {
+	if (soc_is_exynos4212() || soc_is_exynos4412()) {
 		/* Setting SEQ_OPTION register */
 		pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
 			       S5P_CENTRAL_SEQ_OPTION);
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 3bf14ca78b62..df1e10033f90 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -231,6 +231,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 
 EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
 EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
+EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu");
 EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu");
 EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu");
 EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu");
@@ -640,6 +641,9 @@ static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
 	}, {
 		.compatible = "samsung,exynos4210-pmu",
 		.data = &exynos4_pm_data,
+	}, {
+		.compatible = "samsung,exynos4212-pmu",
+		.data = &exynos4_pm_data,
 	}, {
 		.compatible = "samsung,exynos4412-pmu",
 		.data = &exynos4_pm_data,
-- 
2.40.1

[PATCH v3 04/13] soc: samsung: Re-introduce Exynos4212 support

[Artur Weber]

Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
it back.

This reverts commit c40610198f35e8264f9175dafe74db6288a07eda.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
 drivers/soc/samsung/exynos-pmu.c  |  9 +++++++++
 drivers/soc/samsung/exynos-pmu.h  |  2 ++
 drivers/soc/samsung/exynos4-pmu.c | 13 +++++++++++--
 3 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c
index 732c86ce2be8..f3437db2fbdc 100644
--- a/drivers/soc/samsung/exynos-pmu.c
+++ b/drivers/soc/samsung/exynos-pmu.c
@@ -57,6 +57,12 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode)
 
 	if (pmu_data->powerdown_conf_extra)
 		pmu_data->powerdown_conf_extra(mode);
+
+	if (pmu_data->pmu_config_extra) {
+		for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
+			pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
+					pmu_data->pmu_config_extra[i].offset);
+	}
 }
 
 /*
@@ -79,6 +85,9 @@ static const struct of_device_id exynos_pmu_of_device_ids[] = {
 	}, {
 		.compatible = "samsung,exynos4210-pmu",
 		.data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data),
+	}, {
+		.compatible = "samsung,exynos4212-pmu",
+		.data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data),
 	}, {
 		.compatible = "samsung,exynos4412-pmu",
 		.data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data),
diff --git a/drivers/soc/samsung/exynos-pmu.h b/drivers/soc/samsung/exynos-pmu.h
index 5e851f32307e..1c652ffd79b4 100644
--- a/drivers/soc/samsung/exynos-pmu.h
+++ b/drivers/soc/samsung/exynos-pmu.h
@@ -20,6 +20,7 @@ struct exynos_pmu_conf {
 
 struct exynos_pmu_data {
 	const struct exynos_pmu_conf *pmu_config;
+	const struct exynos_pmu_conf *pmu_config_extra;
 
 	void (*pmu_init)(void);
 	void (*powerdown_conf)(enum sys_powerdown);
@@ -32,6 +33,7 @@ extern void __iomem *pmu_base_addr;
 /* list of all exported SoC specific data */
 extern const struct exynos_pmu_data exynos3250_pmu_data;
 extern const struct exynos_pmu_data exynos4210_pmu_data;
+extern const struct exynos_pmu_data exynos4212_pmu_data;
 extern const struct exynos_pmu_data exynos4412_pmu_data;
 extern const struct exynos_pmu_data exynos5250_pmu_data;
 extern const struct exynos_pmu_data exynos5420_pmu_data;
diff --git a/drivers/soc/samsung/exynos4-pmu.c b/drivers/soc/samsung/exynos4-pmu.c
index cb35103565a6..f8092190b938 100644
--- a/drivers/soc/samsung/exynos4-pmu.c
+++ b/drivers/soc/samsung/exynos4-pmu.c
@@ -86,7 +86,7 @@ static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
 	{ PMU_TABLE_END,},
 };
 
-static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
+static const struct exynos_pmu_conf exynos4x12_pmu_config[] = {
 	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
 	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
 	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
@@ -191,6 +191,10 @@ static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
 	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
 	{ S5P_CMU_SYSCLK_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
 	{ S5P_CMU_SYSCLK_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
+	{ PMU_TABLE_END,},
+};
+
+static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
 	{ S5P_ARM_CORE2_LOWPWR,			{ 0x0, 0x0, 0x2 } },
 	{ S5P_DIS_IRQ_CORE2,			{ 0x0, 0x0, 0x0 } },
 	{ S5P_DIS_IRQ_CENTRAL2,			{ 0x0, 0x0, 0x0 } },
@@ -204,6 +208,11 @@ const struct exynos_pmu_data exynos4210_pmu_data = {
 	.pmu_config	= exynos4210_pmu_config,
 };
 
+const struct exynos_pmu_data exynos4212_pmu_data = {
+	.pmu_config	= exynos4x12_pmu_config,
+};
+
 const struct exynos_pmu_data exynos4412_pmu_data = {
-	.pmu_config		= exynos4412_pmu_config,
+	.pmu_config		= exynos4x12_pmu_config,
+	.pmu_config_extra	= exynos4412_pmu_config,
 };
-- 
2.40.1

[PATCH v3 05/13] clk: samsung: Add Exynos4212 compatible to CLKOUT driver

[Artur Weber]

Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
it back.

This reverts commit d5cd103b06f9d766295d18798de484528eb120ea.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
 drivers/clk/samsung/clk-exynos-clkout.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynos-clkout.c b/drivers/clk/samsung/clk-exynos-clkout.c
index e6d6cbf8c4e6..326d5fc58727 100644
--- a/drivers/clk/samsung/clk-exynos-clkout.c
+++ b/drivers/clk/samsung/clk-exynos-clkout.c
@@ -55,6 +55,9 @@ static const struct of_device_id exynos_clkout_ids[] = {
 	}, {
 		.compatible = "samsung,exynos4210-pmu",
 		.data = &exynos_clkout_exynos4,
+	}, {
+		.compatible = "samsung,exynos4212-pmu",
+		.data = &exynos_clkout_exynos4,
 	}, {
 		.compatible = "samsung,exynos4412-pmu",
 		.data = &exynos_clkout_exynos4,
-- 
2.40.1

[PATCH v3 06/13] clk: samsung: Re-add support for Exynos4212 CPU clock

[Artur Weber]

Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
it back.

This reverts commit c9194fb623b0158029a268376df09fe28a2a2b05.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changed in v3:
 - Reordered enum and if statement conditionals (Exynos4212 comes before
   4412)
---
 drivers/clk/samsung/clk-exynos4.c | 44 +++++++++++++++++++++++++++----
 1 file changed, 39 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 22009cb53428..8379dd187bc7 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -138,7 +138,8 @@
 /* the exynos4 soc type */
 enum exynos4_soc {
 	EXYNOS4210,
-	EXYNOS4X12,
+	EXYNOS4212,
+	EXYNOS4412,
 };
 
 /* list of PLLs to be registered */
@@ -1205,6 +1206,24 @@ static const struct exynos_cpuclk_cfg_data e4210_armclk_d[] __initconst = {
 	{  0 },
 };
 
+static const struct exynos_cpuclk_cfg_data e4212_armclk_d[] __initconst = {
+	{ 1500000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4210_CPU_DIV1(2, 6), },
+	{ 1400000, E4210_CPU_DIV0(2, 1, 6, 0, 7, 3), E4210_CPU_DIV1(2, 6), },
+	{ 1300000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4210_CPU_DIV1(2, 5), },
+	{ 1200000, E4210_CPU_DIV0(2, 1, 5, 0, 7, 3), E4210_CPU_DIV1(2, 5), },
+	{ 1100000, E4210_CPU_DIV0(2, 1, 4, 0, 6, 3), E4210_CPU_DIV1(2, 4), },
+	{ 1000000, E4210_CPU_DIV0(1, 1, 4, 0, 5, 2), E4210_CPU_DIV1(2, 4), },
+	{  900000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4210_CPU_DIV1(2, 3), },
+	{  800000, E4210_CPU_DIV0(1, 1, 3, 0, 5, 2), E4210_CPU_DIV1(2, 3), },
+	{  700000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+	{  600000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+	{  500000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+	{  400000, E4210_CPU_DIV0(1, 1, 3, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+	{  300000, E4210_CPU_DIV0(1, 1, 2, 0, 4, 2), E4210_CPU_DIV1(2, 3), },
+	{  200000, E4210_CPU_DIV0(1, 1, 1, 0, 3, 1), E4210_CPU_DIV1(2, 3), },
+	{  0 },
+};
+
 #define E4412_CPU_DIV1(cores, hpm, copy)				\
 		(((cores) << 8) | ((hpm) << 4) | ((copy) << 0))
 
@@ -1233,6 +1252,11 @@ static const struct samsung_cpu_clock exynos4210_cpu_clks[] __initconst = {
 			CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1, 0x14200, e4210_armclk_d),
 };
 
+static const struct samsung_cpu_clock exynos4212_cpu_clks[] __initconst = {
+	CPU_CLK(CLK_ARM_CLK, "armclk", CLK_MOUT_APLL, CLK_MOUT_MPLL_USER_C,
+			CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1, 0x14200, e4212_armclk_d),
+};
+
 static const struct samsung_cpu_clock exynos4412_cpu_clks[] __initconst = {
 	CPU_CLK(CLK_ARM_CLK, "armclk", CLK_MOUT_APLL, CLK_MOUT_MPLL_USER_C,
 			CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1, 0x14200, e4412_armclk_d),
@@ -1326,11 +1350,15 @@ static void __init exynos4_clk_init(struct device_node *np,
 		samsung_clk_register_fixed_factor(ctx,
 			exynos4x12_fixed_factor_clks,
 			ARRAY_SIZE(exynos4x12_fixed_factor_clks));
-		samsung_clk_register_cpu(ctx, exynos4412_cpu_clks,
-				ARRAY_SIZE(exynos4412_cpu_clks));
+		if (soc == EXYNOS4412)
+			samsung_clk_register_cpu(ctx, exynos4412_cpu_clks,
+					ARRAY_SIZE(exynos4412_cpu_clks));
+		else
+			samsung_clk_register_cpu(ctx, exynos4212_cpu_clks,
+					ARRAY_SIZE(exynos4212_cpu_clks));
 	}
 
-	if (soc == EXYNOS4X12)
+	if (soc == EXYNOS4212 || soc == EXYNOS4412)
 		exynos4x12_core_down_clock();
 
 	samsung_clk_extended_sleep_init(reg_base,
@@ -1363,8 +1391,14 @@ static void __init exynos4210_clk_init(struct device_node *np)
 }
 CLK_OF_DECLARE(exynos4210_clk, "samsung,exynos4210-clock", exynos4210_clk_init);
 
+static void __init exynos4212_clk_init(struct device_node *np)
+{
+	exynos4_clk_init(np, EXYNOS4212);
+}
+CLK_OF_DECLARE(exynos4212_clk, "samsung,exynos4212-clock", exynos4212_clk_init);
+
 static void __init exynos4412_clk_init(struct device_node *np)
 {
-	exynos4_clk_init(np, EXYNOS4X12);
+	exynos4_clk_init(np, EXYNOS4412);
 }
 CLK_OF_DECLARE(exynos4412_clk, "samsung,exynos4412-clock", exynos4412_clk_init);
-- 
2.40.1

[PATCH v3 07/13] Revert "media: exynos4-is: Remove dependency on obsolete SoC support"

[Artur Weber]

Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
it back.

This reverts commit 2d41a0c9ae51ac363d107f2510022106e7234b33.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
 drivers/media/platform/samsung/exynos4-is/Kconfig     | 2 +-
 drivers/media/platform/samsung/exynos4-is/fimc-core.c | 2 +-
 drivers/media/platform/samsung/exynos4-is/fimc-lite.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/samsung/exynos4-is/Kconfig b/drivers/media/platform/samsung/exynos4-is/Kconfig
index da33faa7132e..7f9ba053dd8e 100644
--- a/drivers/media/platform/samsung/exynos4-is/Kconfig
+++ b/drivers/media/platform/samsung/exynos4-is/Kconfig
@@ -47,7 +47,7 @@ config VIDEO_S5P_MIPI_CSIS
 config VIDEO_EXYNOS_FIMC_LITE
 	tristate "EXYNOS FIMC-LITE camera interface driver"
 	depends on I2C
-	depends on SOC_EXYNOS4412 || SOC_EXYNOS5250 || COMPILE_TEST
+	depends on SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250 || COMPILE_TEST
 	depends on HAS_DMA
 	select VIDEOBUF2_DMA_CONTIG
 	select VIDEO_EXYNOS4_IS_COMMON
diff --git a/drivers/media/platform/samsung/exynos4-is/fimc-core.c b/drivers/media/platform/samsung/exynos4-is/fimc-core.c
index 1791100b6935..e2f394e60dee 100644
--- a/drivers/media/platform/samsung/exynos4-is/fimc-core.c
+++ b/drivers/media/platform/samsung/exynos4-is/fimc-core.c
@@ -1129,7 +1129,7 @@ static const struct fimc_drvdata fimc_drvdata_exynos4210 = {
 	.out_buf_count	= 32,
 };
 
-/* EXYNOS4412 */
+/* EXYNOS4212, EXYNOS4412 */
 static const struct fimc_drvdata fimc_drvdata_exynos4x12 = {
 	.num_entities	= 4,
 	.lclk_frequency	= 166000000UL,
diff --git a/drivers/media/platform/samsung/exynos4-is/fimc-lite.c b/drivers/media/platform/samsung/exynos4-is/fimc-lite.c
index e185a40305a8..f80047095f30 100644
--- a/drivers/media/platform/samsung/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/samsung/exynos4-is/fimc-lite.c
@@ -1619,7 +1619,7 @@ static const struct dev_pm_ops fimc_lite_pm_ops = {
 			   NULL)
 };
 
-/* EXYNOS4412 */
+/* EXYNOS4212, EXYNOS4412 */
 static struct flite_drvdata fimc_lite_drvdata_exynos4 = {
 	.max_width		= 8192,
 	.max_height		= 8192,
-- 
2.40.1

[PATCH v3 08/13] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"

[Artur Weber]

Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
it back.

This reverts commit fee7e1d50c6e6da1d99035181ba5a5c88f5bb526.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
 drivers/phy/samsung/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index 3ccaabf2850a..f10afa3d7ff5 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig
@@ -59,7 +59,7 @@ config PHY_EXYNOS4210_USB2
 config PHY_EXYNOS4X12_USB2
 	bool
 	depends on PHY_SAMSUNG_USB2
-	default SOC_EXYNOS3250 || SOC_EXYNOS4412
+	default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 
 config PHY_EXYNOS5250_USB2
 	bool
-- 
2.40.1

[PATCH v3 09/13] ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi

[Artur Weber]

In preparation for the re-introduction of the Exynos4212, move
their shared definitions to a separate file. Rename the pinctrl
definitions accordingly, and adapt the Exynos4412 DTSI to these
changes.

This reverts part of commit bca9085e0ae9 ("ARM: dts: exynos:
remove Exynos4212 support (dead code)").

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changed in v3:
 - Rebased on next/dt
---
 arch/arm/boot/dts/exynos4412.dtsi             | 644 +-----------------
 ...2-pinctrl.dtsi => exynos4x12-pinctrl.dtsi} |   4 +-
 .../dts/{exynos4412.dtsi => exynos4x12.dtsi}  | 165 +----
 3 files changed, 11 insertions(+), 802 deletions(-)
 rename arch/arm/boot/dts/{exynos4412-pinctrl.dtsi => exynos4x12-pinctrl.dtsi} (99%)
 copy arch/arm/boot/dts/{exynos4412.dtsi => exynos4x12.dtsi} (81%)

diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 82a36fb5ee8b..8660c4c76e3a 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -14,150 +14,11 @@
  * nodes can be added to this file.
  */
 
-#include "exynos4.dtsi"
-
-#include "exynos4-cpu-thermal.dtsi"
+#include "exynos4x12.dtsi"
 
 / {
 	compatible = "samsung,exynos4412", "samsung,exynos4";
 
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		fimc-lite0 = &fimc_lite_0;
-		fimc-lite1 = &fimc_lite_1;
-	};
-
-	bus_acp: bus-acp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_ACP>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_acp_opp_table>;
-		status = "disabled";
-
-		bus_acp_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-	};
-
-	bus_c2c: bus-c2c {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_C2C>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		status = "disabled";
-	};
-
-	bus_dmc: bus-dmc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_DMC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		samsung,data-clock-ratio = <4>;
-		#interconnect-cells = <0>;
-		status = "disabled";
-	};
-
-	bus_display: bus-display {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK160>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_display_opp_table>;
-		interconnects = <&bus_leftbus &bus_dmc>;
-		#interconnect-cells = <0>;
-		status = "disabled";
-
-		bus_display_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-	};
-
-	bus_fsys: bus-fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK133>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_fsys_opp_table>;
-		status = "disabled";
-
-		bus_fsys_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-	};
-
-	bus_leftbus: bus-leftbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_GDL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		interconnects = <&bus_dmc>;
-		#interconnect-cells = <0>;
-		status = "disabled";
-	};
-
-	bus_mfc: bus-mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_SCLK_MFC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_peri: bus-peri {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK100>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_peri_opp_table>;
-		status = "disabled";
-
-		bus_peri_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-	};
-
-	bus_rightbus: bus-rightbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_GDR>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -297,499 +158,20 @@ cpu0_opp_1500: opp-1500000000 {
 			turbo-mode;
 		};
 	};
+};
 
-	bus_dmc_opp_table: opp-table-1 {
-		compatible = "operating-points-v2";
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <1050000>;
-			opp-suspend;
-		};
-	};
-
-	bus_leftbus_opp_table: opp-table-2 {
-		compatible = "operating-points-v2";
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <925000>;
-		};
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <1000000>;
-			opp-suspend;
-		};
-	};
-
-	soc: soc {
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakup_eint: wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_2: pinctrl@3860000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 0>;
-		};
-
-		pinctrl_3: pinctrl@106e0000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x106e0000 0x1000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sram@2020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x40000>;
-
-			smp-sram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sram@2f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x2f000 0x1000>;
-			};
-		};
-
-		pd_isp: power-domain@10023ca0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023ca0 0x20>;
-			#power-domain-cells = <0>;
-			label = "ISP";
-		};
-
-		l2c: cache-controller@10502000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10502000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			prefetch-data = <1>;
-			prefetch-instr = <1>;
-			arm,tag-latency = <2 2 1>;
-			arm,data-latency = <3 2 1>;
-			arm,double-linefill = <1>;
-			arm,double-linefill-incr = <0>;
-			arm,double-linefill-wrap = <1>;
-			arm,prefetch-drop = <1>;
-			arm,prefetch-offset = <7>;
-		};
-
-		clock: clock-controller@10030000 {
-			compatible = "samsung,exynos4412-clock";
-			reg = <0x10030000 0x18000>;
-			#clock-cells = <1>;
-		};
-
-		isp_clock: clock-controller@10048000 {
-			compatible = "samsung,exynos4412-isp-clock";
-			reg = <0x10048000 0x1000>;
-			#clock-cells = <1>;
-			power-domains = <&pd_isp>;
-			clocks = <&clock CLK_ACLK200>,
-				 <&clock CLK_ACLK400_MCUISP>;
-			clock-names = "aclk200", "aclk400_mcuisp";
-		};
-
-		timer@10050000 {
-			compatible = "samsung,exynos4412-mct";
-			reg = <0x10050000 0x800>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-					      <&combiner 12 5>,
-					      <&combiner 12 6>,
-					      <&combiner 12 7>,
-					      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		watchdog: watchdog@10060000 {
-			compatible = "samsung,exynos5250-wdt";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_WDT>;
-			clock-names = "watchdog";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-		};
-
-		adc: adc@126c0000 {
-			compatible = "samsung,exynos4212-adc";
-			reg = <0x126c0000 0x100>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 3>;
-			clocks = <&clock CLK_TSADC>;
-			clock-names = "adc";
-			#io-channel-cells = <1>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		g2d: g2d@10800000 {
-			compatible = "samsung,exynos4212-g2d";
-			reg = <0x10800000 0x1000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-			clock-names = "sclk_fimg2d", "fimg2d";
-			iommus = <&sysmmu_g2d>;
-		};
-
-		mshc_0: mmc@12550000 {
-			compatible = "samsung,exynos4412-dw-mshc";
-			reg = <0x12550000 0x1000>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			fifo-depth = <0x80>;
-			clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
-			clock-names = "biu", "ciu";
-			status = "disabled";
-		};
-
-		sysmmu_g2d: sysmmu@10a40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10a40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 7>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_isp: sysmmu@12260000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12260000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 2>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_ISP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_drc: sysmmu@12270000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12270000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 3>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_DRC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_fd: sysmmu@122a0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122a0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 4>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_FD>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_mcuctl: sysmmu@122b0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122b0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 5>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite0: sysmmu@123b0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123b0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 0>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu", "master";
-			clocks = <&isp_clock CLK_ISP_SMMU_LITE0>,
-				 <&isp_clock CLK_ISP_FIMC_LITE0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite1: sysmmu@123c0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123c0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 1>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu", "master";
-			clocks = <&isp_clock CLK_ISP_SMMU_LITE1>,
-				 <&isp_clock CLK_ISP_FIMC_LITE1>;
-			#iommu-cells = <0>;
-		};
-	};
+&clock {
+	compatible = "samsung,exynos4412-clock";
 };
 
 &combiner {
 	samsung,combiner-nr = <20>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&camera {
-	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-	/* fimc_[0-3] are configured outside, under phandles */
-	fimc_lite_0: fimc-lite@12390000 {
-		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x12390000 0x1000>;
-		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
-		clock-names = "flite";
-		iommus = <&sysmmu_fimc_lite0>;
-		status = "disabled";
-	};
-
-	fimc_lite_1: fimc-lite@123a0000 {
-		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123a0000 0x1000>;
-		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
-		clock-names = "flite";
-		iommus = <&sysmmu_fimc_lite1>;
-		status = "disabled";
-	};
-
-	fimc_is: fimc-is@12000000 {
-		compatible = "samsung,exynos4212-fimc-is";
-		reg = <0x12000000 0x260000>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
-			 <&isp_clock CLK_ISP_FIMC_LITE1>,
-			 <&isp_clock CLK_ISP_PPMUISPX>,
-			 <&isp_clock CLK_ISP_PPMUISPMX>,
-			 <&isp_clock CLK_ISP_FIMC_ISP>,
-			 <&isp_clock CLK_ISP_FIMC_DRC>,
-			 <&isp_clock CLK_ISP_FIMC_FD>,
-			 <&isp_clock CLK_ISP_MCUISP>,
-			 <&isp_clock CLK_ISP_GICISP>,
-			 <&isp_clock CLK_ISP_MCUCTL_ISP>,
-			 <&isp_clock CLK_ISP_PWM_ISP>,
-			 <&isp_clock CLK_ISP_DIV_ISP0>,
-			 <&isp_clock CLK_ISP_DIV_ISP1>,
-			 <&isp_clock CLK_ISP_DIV_MCUISP0>,
-			 <&isp_clock CLK_ISP_DIV_MCUISP1>,
-			 <&clock CLK_MOUT_MPLL_USER_T>,
-			 <&clock CLK_ACLK200>,
-			 <&clock CLK_ACLK400_MCUISP>,
-			 <&clock CLK_DIV_ACLK200>,
-			 <&clock CLK_DIV_ACLK400_MCUISP>,
-			 <&clock CLK_UART_ISP_SCLK>;
-		clock-names = "lite0", "lite1", "ppmuispx",
-			      "ppmuispmx", "isp",
-			      "drc", "fd", "mcuisp",
-			      "gicisp", "mcuctl_isp", "pwm_isp",
-			      "ispdiv0", "ispdiv1", "mcuispdiv0",
-			      "mcuispdiv1", "mpll", "aclk200",
-			      "aclk400mcuisp", "div_aclk200",
-			      "div_aclk400mcuisp", "uart";
-		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
-			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
-		iommu-names = "isp", "drc", "fd", "mcuctl";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		status = "disabled";
-
-		pmu@10020000 {
-			reg = <0x10020000 0x3000>;
-		};
-
-		i2c1_isp: i2c-isp@12140000 {
-			compatible = "samsung,exynos4212-i2c-isp";
-			reg = <0x12140000 0x100>;
-			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
-			clock-names = "i2c_isp";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&exynos_usbphy {
-	compatible = "samsung,exynos4x12-usb2-phy";
-	samsung,sysreg-phandle = <&sys_reg>;
-};
-
-&fimc_0 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_1 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_2 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-	samsung,cam-if;
-};
-
-&fimc_3 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <1920 8192 1366 1920>;
-	samsung,rotators = <0>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
 };
 
 &gic {
 	cpu-offset = <0x4000>;
 };
 
-&gpu {
-	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "gp",
-			  "gpmmu",
-			  "pp0",
-			  "ppmmu0",
-			  "pp1",
-			  "ppmmu1",
-			  "pp2",
-			  "ppmmu2",
-			  "pp3",
-			  "ppmmu3",
-			  "pmu";
-	operating-points-v2 = <&gpu_opp_table>;
-
-	gpu_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <875000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-350000000 {
-			opp-hz = /bits/ 64 <350000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-440000000 {
-			opp-hz = /bits/ 64 <440000000>;
-			opp-microvolt = <1025000>;
-		};
-	};
-};
-
-&hdmi {
-	compatible = "samsung,exynos4212-hdmi";
-};
-
-&jpeg_codec {
-	compatible = "samsung,exynos4212-jpeg";
-};
-
-&rotator {
-	compatible = "samsung,exynos4212-rotator";
-};
-
-&mixer {
-	compatible = "samsung,exynos4212-mixer";
-	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
-	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
-	interconnects = <&bus_display &bus_dmc>;
-};
-
 &pmu {
 	interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
 	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
@@ -798,22 +180,4 @@ &pmu {
 
 &pmu_system_controller {
 	compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon";
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
-	#clock-cells = <1>;
 };
-
-&tmu {
-	compatible = "samsung,exynos4412-tmu";
-	interrupt-parent = <&combiner>;
-	interrupts = <2 4>;
-	reg = <0x100c0000 0x100>;
-	clocks = <&clock CLK_TMU_APBIF>;
-	clock-names = "tmu_apbif";
-	status = "disabled";
-};
-
-#include "exynos4412-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
similarity index 99%
rename from arch/arm/boot/dts/exynos4412-pinctrl.dtsi
rename to arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 8ab31c3daa48..9f7ea5f2a91f 100644
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
  *
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
  * tree nodes are listed in this file.
  */
 
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
similarity index 81%
copy from arch/arm/boot/dts/exynos4412.dtsi
copy to arch/arm/boot/dts/exynos4x12.dtsi
index 82a36fb5ee8b..dcbb19824620 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -5,12 +5,12 @@
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
- * based board files can include this file and provide values for board specfic
- * bindings.
+ * Samsung's Exynos4x12 SoC series device nodes are listed in this file.
+ * Particular SoCs from Exynos4x12 series can include this file and provide
+ * values for SoCs specfic bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
- * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
+ * Exynos4x12 SoCs. As device tree coverage for Exynos4x12 increases, additional
  * nodes can be added to this file.
  */
 
@@ -19,8 +19,6 @@
 #include "exynos4-cpu-thermal.dtsi"
 
 / {
-	compatible = "samsung,exynos4412", "samsung,exynos4";
-
 	aliases {
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
@@ -158,146 +156,6 @@ bus_rightbus: bus-rightbus {
 		status = "disabled";
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-				core2 {
-					cpu = <&cpu2>;
-				};
-				core3 {
-					cpu = <&cpu3>;
-				};
-			};
-		};
-
-		cpu0: cpu@a00 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa00>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu1: cpu@a01 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa01>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu2: cpu@a02 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa02>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu3: cpu@a03 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa03>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	cpu0_opp_table: opp-table-0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <925000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <975000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <987500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <200000>;
-			opp-suspend;
-		};
-		opp-900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = <1037500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1087500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1137500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1187500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1250000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1287500>;
-			clock-latency-ns = <200000>;
-		};
-		cpu0_opp_1500: opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1350000>;
-			clock-latency-ns = <200000>;
-			turbo-mode;
-		};
-	};
-
 	bus_dmc_opp_table: opp-table-1 {
 		compatible = "operating-points-v2";
 
@@ -421,7 +279,6 @@ l2c: cache-controller@10502000 {
 		};
 
 		clock: clock-controller@10030000 {
-			compatible = "samsung,exynos4412-clock";
 			reg = <0x10030000 0x18000>;
 			#clock-cells = <1>;
 		};
@@ -571,7 +428,6 @@ sysmmu_fimc_lite1: sysmmu@123c0000 {
 };
 
 &combiner {
-	samsung,combiner-nr = <20>;
 	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
@@ -719,10 +575,6 @@ &fimc_3 {
 	samsung,lcd-wb;
 };
 
-&gic {
-	cpu-offset = <0x4000>;
-};
-
 &gpu {
 	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
@@ -790,14 +642,7 @@ &mixer {
 	interconnects = <&bus_display &bus_dmc>;
 };
 
-&pmu {
-	interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
-	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	status = "okay";
-};
-
 &pmu_system_controller {
-	compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon";
 	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
 			"clkout4", "clkout8", "clkout9";
 	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
@@ -816,4 +661,4 @@ &tmu {
 	status = "disabled";
 };
 
-#include "exynos4412-pinctrl.dtsi"
+#include "exynos4x12-pinctrl.dtsi"
-- 
2.40.1

[PATCH v3 10/13] ARM: dts: Re-introduce Exynos4212 DTSI

[Artur Weber]

Support for the Exynos4212 SoC was originally dropped as there were
no boards using it. We will be adding a device that uses it, so add
it back.

This reverts commit bca9085e0ae93253bc93ce218c85ac7d7e7f1831.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changed in v3:
 - Rebased on next/dt
---
 arch/arm/boot/dts/exynos4212.dtsi | 157 ++++++++++++++++++++++++++++++
 1 file changed, 157 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos4212.dtsi

diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
new file mode 100644
index 000000000000..0ac3245788fc
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include "exynos4x12.dtsi"
+
+/ {
+	compatible = "samsung,exynos4212", "samsung,exynos4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@a00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa00>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@a01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa01>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <200000>;
+			opp-suspend;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1037500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1087500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1137500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1187500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1287500>;
+			clock-latency-ns = <200000>;
+		};
+		cpu0_opp_1500: opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1350000>;
+			clock-latency-ns = <200000>;
+			turbo-mode;
+		};
+	};
+};
+
+&clock {
+	compatible = "samsung,exynos4212-clock";
+};
+
+&combiner {
+	samsung,combiner-nr = <18>;
+};
+
+&gic {
+	cpu-offset = <0x8000>;
+};
+
+&pmu {
+	interrupts = <2 2>, <3 2>;
+	interrupt-affinity = <&cpu0>, <&cpu1>;
+	status = "okay";
+};
+
+&pmu_system_controller {
+	compatible = "samsung,exynos4212-pmu", "simple-mfd", "syscon";
+};
-- 
2.40.1

[PATCH v3 11/13] ARM: dts: exynos: Fix some typos in comments

[Artur Weber]

Change 'specfic' to 'specific', 'optiosn' to 'options' and remove
duplicated 'are listed' in DTSI heading comments.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
 arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 4 ++--
 arch/arm/boot/dts/exynos3250.dtsi         | 2 +-
 arch/arm/boot/dts/exynos4.dtsi            | 2 +-
 arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 4 ++--
 arch/arm/boot/dts/exynos4212.dtsi         | 2 +-
 arch/arm/boot/dts/exynos4412.dtsi         | 2 +-
 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 4 ++--
 arch/arm/boot/dts/exynos4x12.dtsi         | 2 +-
 arch/arm/boot/dts/exynos5.dtsi            | 2 +-
 arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 4 ++--
 arch/arm/boot/dts/exynos5250.dtsi         | 2 +-
 arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 2 +-
 arch/arm/boot/dts/exynos5410.dtsi         | 2 +-
 arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 2 +-
 arch/arm/boot/dts/exynos5420.dtsi         | 2 +-
 arch/arm/boot/dts/exynos5800.dtsi         | 2 +-
 arch/arm/boot/dts/s3c6400.dtsi            | 2 +-
 arch/arm/boot/dts/s3c6410.dtsi            | 2 +-
 arch/arm/boot/dts/s3c64xx.dtsi            | 2 +-
 arch/arm/boot/dts/s5pv210-pinctrl.dtsi    | 2 +-
 arch/arm/boot/dts/s5pv210.dtsi            | 2 +-
 21 files changed, 25 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 011ba2eff29e..07828551d4b3 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -5,8 +5,8 @@
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
  */
 
 #include "exynos-pinctrl.h"
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index bd37f1b587f0..3f1015edab43 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -6,7 +6,7 @@
  *		http://www.samsung.com
  *
  * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 8dd6976ab0a7..549e63b51242 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -9,7 +9,7 @@
  *
  * Samsung's Exynos4 SoC series device nodes are listed in this file.  Particular
  * SoCs from Exynos4 series can include this file and provide values for SoCs
- * specfic bindings.
+ * specific bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
  * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 76f44ae0de46..70d268f9fcb1 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -7,8 +7,8 @@
  * Copyright (c) 2011-2012 Linaro Ltd.
  *		www.linaro.org
  *
- * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
+ * Samsung's Exynos4210 SoC pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
  */
 
 #include "exynos-pinctrl.h"
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index 0ac3245788fc..aa984601ee06 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -6,7 +6,7 @@
  *		http://www.samsung.com
  *
  * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 8660c4c76e3a..dcbe0ce6180f 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -6,7 +6,7 @@
  *		http://www.samsung.com
  *
  * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 9f7ea5f2a91f..04935fbe2f2a 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -5,8 +5,8 @@
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
  */
 
 #include "exynos-pinctrl.h"
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index dcbb19824620..84c1db221c98 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -7,7 +7,7 @@
  *
  * Samsung's Exynos4x12 SoC series device nodes are listed in this file.
  * Particular SoCs from Exynos4x12 series can include this file and provide
- * values for SoCs specfic bindings.
+ * values for SoCs specific bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
  * Exynos4x12 SoCs. As device tree coverage for Exynos4x12 increases, additional
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 48e43b6b3213..4a17a19586bb 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -7,7 +7,7 @@
  *
  * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular
  * SoCs from Exynos5 series can include this file and provide values for SoCs
- * specfic bindings.
+ * specific bindings.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 48732edadff1..d956540a2d88 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -5,8 +5,8 @@
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
+ * Samsung's Exynos5250 SoC pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
  */
 
 #include "exynos-pinctrl.h"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 1a4c6c028d03..99c84bebf25a 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -7,7 +7,7 @@
  *
  * Samsung Exynos5250 SoC device nodes are listed in this file.
  * Exynos5250 based board files can include this file and provide
- * values for board specfic bindings.
+ * values for board specific bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
  * Exynos5250 SoC. As device tree coverage for Exynos5250 increases,
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index 43e4a541f479..d15494b4bda9 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -6,7 +6,7 @@
  *		http://www.samsung.com
  *
  * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
- * tree nodes are listed in this file.
+ * tree nodes in this file.
  */
 
 #include "exynos-pinctrl.h"
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 350b8afa0a3a..546035e78f40 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -7,7 +7,7 @@
  *
  * Samsung Exynos5410 SoC device nodes are listed in this file.
  * Exynos5410 based board files can include this file and provide
- * values for board specfic bindings.
+ * values for board specific bindings.
  */
 
 #include "exynos54xx.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 14cf9c4ca0ed..93b9873fa84f 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -6,7 +6,7 @@
  *		http://www.samsung.com
  *
  * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device
- * tree nodes are listed in this file.
+ * tree nodes in this file.
  */
 
 #include "exynos-pinctrl.h"
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index dd291f1199f2..25ed90374679 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -7,7 +7,7 @@
  *
  * Samsung Exynos5420 SoC device nodes are listed in this file.
  * Exynos5420 based board files can include this file and provide
- * values for board specfic bindings.
+ * values for board specific bindings.
  */
 
 #include "exynos54xx.dtsi"
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
index 8328ddb3b02f..72d3a3535a7a 100644
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -7,7 +7,7 @@
  *
  * Samsung Exynos5800 SoC device nodes are listed in this file.
  * Exynos5800 based board files can include this file and provide
- * values for board specfic bindings.
+ * values for board specific bindings.
  */
 
 #include "exynos5420.dtsi"
diff --git a/arch/arm/boot/dts/s3c6400.dtsi b/arch/arm/boot/dts/s3c6400.dtsi
index 8c28e8a0c824..7cc785a63866 100644
--- a/arch/arm/boot/dts/s3c6400.dtsi
+++ b/arch/arm/boot/dts/s3c6400.dtsi
@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
  *
  * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
diff --git a/arch/arm/boot/dts/s3c6410.dtsi b/arch/arm/boot/dts/s3c6410.dtsi
index a766d6de696c..13e9cc69b8a8 100644
--- a/arch/arm/boot/dts/s3c6410.dtsi
+++ b/arch/arm/boot/dts/s3c6410.dtsi
@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
  *
  * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index c03df6355500..0b59135ffe88 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -6,7 +6,7 @@
  *
  * Samsung's S3C64xx SoC series device nodes are listed in this file.
  * Particular SoCs from S3C64xx series can include this file and provide
- * values for SoCs specfic bindings.
+ * values for SoCs specific bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
  * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index 6d6daef9fb7a..d5bd506d3ddc 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -8,7 +8,7 @@
  * Tomasz Figa <t.figa@samsung.com>
  *
  * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 1a9e4a96b2ff..0db5a687a530 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -8,7 +8,7 @@
  * Tomasz Figa <t.figa@samsung.com>
  *
  * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
-- 
2.40.1

[PATCH v3 12/13] dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards

[Artur Weber]

Add the compatible strings for the Samsung Galaxy Tab 3 8.0 series
of tablets.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changed in v3:
 - Moved Exynos4212 board before 4412
 - Changed description to Galaxy Tab3 instead of just Tab3
---
 .../bindings/arm/samsung/samsung-boards.yaml           | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index deb2cf971871..e3ffd8159ab6 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -72,6 +72,16 @@ properties:
           - const: samsung,exynos4210
           - const: samsung,exynos4
 
+      - description: Samsung Galaxy Tab3 family boards
+        items:
+          - enum:
+              - samsung,t310                    # Samsung Galaxy Tab 3 8.0 WiFi (SM-T310)
+              - samsung,t311                    # Samsung Galaxy Tab 3 8.0 3G (SM-T311)
+              - samsung,t315                    # Samsung Galaxy Tab 3 8.0 LTE (SM-T315)
+          - const: samsung,tab3
+          - const: samsung,exynos4212
+          - const: samsung,exynos4
+
       - description: Exynos4412 based boards
         items:
           - enum:
-- 
2.40.1

[PATCH v3 13/13] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards

[Artur Weber]

Introduce support for the Galaxy Tab 3 8.0 series of boards:

 - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
 - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
 - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)

What works:

 - Display and backlight
 - Touchscreen (without touchkeys)
 - GPIO buttons, hall sensor
 - WiFi and Bluetooth
 - USB, fuel gauge, charging
 - Accelerometer and magnetometer
 - WiFi model only: light sensor

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changed in v3:
 - Addressed review comments
 - Removed rtc node (RTC is provided by PMIC)
 - Added CPU thermal node
 - Fixed dtb_check warnings
 - Added common changes from next/dt

Display panel bindings are added by a separate patchset:
"[PATCH 0/3] Add Samsung S6D7AA0 panel controller driver"[1]

LP855X node is adapted to changes from a separate patchset:
"[PATCH 0/4] video: backlight: lp855x: modernize bindings"[2]

[1] https://lore.kernel.org/all/20230501185103.25939-1-aweber.kernel@gmail.com/
[2] https://lore.kernel.org/all/20230429104534.28943-1-aweber.kernel@gmail.com/
---
 arch/arm/boot/dts/Makefile                  |    3 +
 arch/arm/boot/dts/exynos4212-tab3-3g8.dts   |   29 +
 arch/arm/boot/dts/exynos4212-tab3-lte8.dts  |   44 +
 arch/arm/boot/dts/exynos4212-tab3-wifi8.dts |   26 +
 arch/arm/boot/dts/exynos4212-tab3.dtsi      | 1171 +++++++++++++++++++
 5 files changed, 1273 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos4212-tab3-3g8.dts
 create mode 100644 arch/arm/boot/dts/exynos4212-tab3-lte8.dts
 create mode 100644 arch/arm/boot/dts/exynos4212-tab3-wifi8.dts
 create mode 100644 arch/arm/boot/dts/exynos4212-tab3.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index efe4152e5846..e5f63b636637 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -217,6 +217,9 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
 	exynos4210-universal_c210.dtb \
+	exynos4212-tab3-3g8.dtb \
+	exynos4212-tab3-lte8.dtb \
+	exynos4212-tab3-wifi8.dtb \
 	exynos4412-i9300.dtb \
 	exynos4412-i9305.dtb \
 	exynos4412-itop-elite.dtb \
diff --git a/arch/arm/boot/dts/exynos4212-tab3-3g8.dts b/arch/arm/boot/dts/exynos4212-tab3-3g8.dts
new file mode 100644
index 000000000000..6d890353ae76
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212-tab3-3g8.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 3G board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 3 8.0 3G (SM-T311) based on Exynos4212";
+	compatible = "samsung,t311", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+	chassis-type = "tablet";
+};
+
+/* Pin control sleep state overrides */
+&sleep0 {
+		PIN_SLP(gpb-5, INPUT, UP);
+};
+
+&sleep1 {
+		PIN_SLP(gpl0-0, OUT0, NONE);
+		PIN_SLP(gpl1-0, OUT0, NONE);
+		PIN_SLP(gpl2-4, OUT0, NONE);
+		PIN_SLP(gpm3-3, OUT1, NONE);
+};
diff --git a/arch/arm/boot/dts/exynos4212-tab3-lte8.dts b/arch/arm/boot/dts/exynos4212-tab3-lte8.dts
new file mode 100644
index 000000000000..c5ec68c292b0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212-tab3-lte8.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 LTE board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 3 8.0 LTE (SM-T315) based on Exynos4212";
+	compatible = "samsung,t315", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+	chassis-type = "tablet";
+};
+
+/* Pin control sleep state overrides */
+&sleep0 {
+		PIN_SLP(gpa0-4, INPUT, UP);
+		PIN_SLP(gpa0-5, INPUT, UP);
+
+		PIN_SLP(gpb-5, INPUT, UP);
+
+		PIN_SLP(gpc0-0, PREV, NONE);
+		PIN_SLP(gpc1-3, INPUT, NONE);
+
+		PIN_SLP(gpf1-6, INPUT, NONE);
+		PIN_SLP(gpf2-2, PREV, NONE);
+};
+
+&sleep1 {
+		PIN_SLP(gpl0-0, PREV, NONE);
+
+		PIN_SLP(gpl1-0, PREV, NONE);
+
+		PIN_SLP(gpl2-1, INPUT, DOWN);
+		PIN_SLP(gpl2-2, INPUT, DOWN);
+		PIN_SLP(gpl2-4, OUT0, NONE);
+		PIN_SLP(gpl2-5, PREV, NONE);
+
+		PIN_SLP(gpm3-3, OUT1, NONE);
+};
diff --git a/arch/arm/boot/dts/exynos4212-tab3-wifi8.dts b/arch/arm/boot/dts/exynos4212-tab3-wifi8.dts
new file mode 100644
index 000000000000..54cb01703b60
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212-tab3-wifi8.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 8.0 WiFi board device tree
+ * source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212-tab3.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 3 8.0 WiFi (SM-T310) based on Exynos4212";
+	compatible = "samsung,t310", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+	chassis-type = "tablet";
+};
+
+&i2c_lightsensor {
+	status = "okay";
+
+	lightsensor@10 {
+		compatible = "capella,cm3323";
+		reg = <0x10>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4212-tab3.dtsi b/arch/arm/boot/dts/exynos4212-tab3.dtsi
new file mode 100644
index 000000000000..b5c2ff464d1f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212-tab3.dtsi
@@ -0,0 +1,1171 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4212 based Galaxy Tab 3 board common source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4212.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos-pinctrl.h"
+
+/ {
+	compatible = "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+
+		/*
+		 * Technically 1.5GB is available, but the latter 512MB is handled
+		 * in a special way by downstream (every second page is skipped),
+		 * and thus doesn't initialize correctly on mainline. Only 1020M is
+		 * used for now.
+		 */
+		reg = <0x40000000 0x3fc00000>;
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+
+		/* Default S-BOOT bootloader loads initramfs here */
+		linux,initrd-start = <0x42000000>;
+		linux,initrd-end = <0x42800000>;
+	};
+
+	firmware@204f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204F000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		key-power {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		key-up {
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		key-down {
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		key-home {
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "home";
+			debounce-interval = <10>;
+		};
+
+		switch-hall-sensor {
+			gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			label = "hall effect sensor";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	i2c_max77693: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "maxim,max77693";
+			reg = <0x66>;
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77693_irq>;
+
+			regulators {
+				esafeout1_reg: ESAFEOUT1 {
+					regulator-name = "ESAFEOUT1";
+					regulator-boot-on;
+				};
+
+				esafeout2_reg: ESAFEOUT2 {
+					regulator-name = "ESAFEOUT2";
+				};
+
+				charger_reg: CHARGER {
+					regulator-name = "CHARGER";
+					regulator-min-microamp = <60000>;
+					regulator-max-microamp = <2580000>;
+					regulator-boot-on;
+				};
+			};
+
+			charger {
+				compatible = "maxim,max77693-charger";
+
+				maxim,constant-microvolt = <4350000>;
+				maxim,min-system-microvolt = <3600000>;
+				maxim,thermal-regulation-celsius = <100>;
+				maxim,battery-overcurrent-microamp = <3500000>;
+				maxim,charge-input-threshold-microvolt = <4300000>;
+			};
+		};
+	};
+
+	i2c_max77693_fuel: i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fuel-gauge@36 {
+			compatible = "maxim,max17050";
+			reg = <0x36>;
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77693_fuel_irq>;
+
+			maxim,over-heat-temp = <500>;
+			maxim,over-volt = <4500>;
+		};
+	};
+
+	i2c_magnetometer: i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		magnetometer@2e {
+			compatible = "yamaha,yas532";
+			reg = <0x2e>;
+			iovdd-supply = <&ldo3_reg>;
+			mount-matrix = "-1", "0", "0",
+					  "0", "1", "0",
+					  "0", "0", "-1";
+		};
+	};
+
+	i2c_lightsensor: i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		/* WiFi model uses CM3323, 3G/LTE use CM36653 */
+	};
+
+	i2c_bl: i2c-gpio-5 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		backlight: backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+
+			bl-name = "lcd-bl";
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0x78>; /* 120 */
+
+			power-supply = <&vbatt_reg>;
+			enable-supply = <&backlight_reset_supply>;
+
+			pwms = <&pwm 1 78770 0>;
+			pwm-names = "lp8556";
+
+			rom-a3h {
+				rom-addr = /bits/ 8 <0xa3>;
+				rom-val = /bits/ 8 <0x5e>;
+			};
+
+			rom-a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x34>;
+			};
+
+			rom-a7h {
+				rom-addr = /bits/ 8 <0xa7>;
+				rom-val = /bits/ 8 <0xfa>;
+			};
+		};
+	};
+
+	vbatt_reg: voltage-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBATT";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	backlight_reset_supply: voltage-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT_ENVDDIO";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_reset>;
+		gpio = <&gpm0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	display_3v3_supply: voltage-regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "DISPLAY_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_en>;
+		gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; /* LCD_EN */
+		enable-active-high;
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_display {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>;
+		};
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>;
+		};
+	};
+};
+
+&dsi_0 {
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	samsung,burst-clock-frequency = <500000000>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <24000000>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6d7aa0-lsl080al02";
+		reg = <0>;
+		power-supply = <&display_3v3_supply>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_nrst>;
+		reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight>;
+	};
+};
+
+&exynos_usbphy {
+	vbus-supply = <&esafeout1_reg>;
+	status = "okay";
+};
+
+&fimd {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_1 {
+	pinctrl-0 = <&i2c1_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	lis3dh: accelerometer@19 {
+		/* K2DH seems to be the same as lis2dh12 in terms of registers */
+		compatible = "st,lis2dh12-accel";
+		reg = <0x19>;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&ldo17_reg>;
+		vddio-supply = <&ldo3_reg>;
+
+		mount-matrix = "-1", "0", "0",
+				  "0", "1", "0",
+				  "0", "0", "-1";
+	};
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touchscreen@48 {
+		/* MELFAS MMS252, using MMS114 compatible for now */
+		compatible = "melfas,mms114";
+		reg = <0x48>;
+		interrupt-parent = <&gpb>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <1280>;
+		avdd-supply = <&ldo21_reg>;
+		vdd-supply = <&ldo25_reg>;
+	};
+};
+
+&i2c_7 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	s5m8767: pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+		wakeup-source;
+
+		s5m8767,pmic-buck-default-dvs-idx = <1>;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpm3 0 GPIO_ACTIVE_HIGH>,
+						 <&gpm3 1 GPIO_ACTIVE_HIGH>,
+						 <&gpm3 2 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck-ds-gpios = <&gpf3 1 GPIO_ACTIVE_HIGH>,
+						 <&gpf3 2 GPIO_ACTIVE_HIGH>,
+						 <&gpf3 3 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>;
+
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>;
+
+		s5m8767,pmic-buck4-dvs-voltage = <1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>,
+						<1100000>, <1100000>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VALIVE_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VM1M2_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VCC_3.3V_MHL";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VMIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				op_mode = <3>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VSIL_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				op_mode = <1>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <3>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VUOTG_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				op_mode = <1>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VCC_1.8V_MHL";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VHSIC_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				op_mode = <1>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VCC_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+				regulator-always-on;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VLED_IC_1.9V";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+				op_mode = <1>;
+				regulator-always-on;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VTOUCH_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "TSP_VDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "5M_AF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <3>;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "LEDA_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "TSP_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "CAM_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VTCAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VMEM_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt	= <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				op_mode = <1>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		s5m8767_osc: clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "en32khz_ap",
+						 "en32khz_cp",
+						 "en32khz_bt";
+		};
+	};
+};
+
+&mshc_0 {
+	broken-cd;
+	non-removable;
+	card-detect-delay = <200>;
+	vmmc-supply = <&ldo22_reg>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <0>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	lcd_en: lcd-en-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	lcd_nrst: lcd-nrst-pins {
+		samsung,pins = "gpf0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	s5m8767_ds: s5m8767-ds-pins {
+		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sleep0: sleep-state {
+		PIN_SLP(gpa0-0, INPUT, NONE);
+		PIN_SLP(gpa0-1, OUT0, NONE);
+		PIN_SLP(gpa0-2, INPUT, NONE);
+		PIN_SLP(gpa0-3, INPUT, UP);
+		PIN_SLP(gpa0-4, INPUT, DOWN);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, DOWN);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, INPUT, NONE);
+		PIN_SLP(gpb-1, INPUT, NONE);
+		PIN_SLP(gpb-2, INPUT, NONE);
+		PIN_SLP(gpb-3, INPUT, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, DOWN);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, NONE);
+		PIN_SLP(gpc0-3, INPUT, NONE);
+		PIN_SLP(gpc0-4, INPUT, NONE);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, OUT0, NONE);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, DOWN);
+		PIN_SLP(gpd1-1, INPUT, DOWN);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+
+		PIN_SLP(gpf0-0, INPUT, DOWN);
+		PIN_SLP(gpf0-1, INPUT, DOWN);
+		PIN_SLP(gpf0-2, INPUT, DOWN);
+		PIN_SLP(gpf0-3, INPUT, DOWN);
+		PIN_SLP(gpf0-4, OUT0, NONE);
+		PIN_SLP(gpf0-5, OUT0, NONE);
+		PIN_SLP(gpf0-6, INPUT, DOWN);
+		PIN_SLP(gpf0-7, INPUT, DOWN);
+
+		PIN_SLP(gpf1-0, INPUT, DOWN);
+		PIN_SLP(gpf1-1, INPUT, DOWN);
+		PIN_SLP(gpf1-2, INPUT, DOWN);
+		PIN_SLP(gpf1-3, INPUT, DOWN);
+		PIN_SLP(gpf1-4, INPUT, DOWN);
+		PIN_SLP(gpf1-5, INPUT, DOWN);
+		PIN_SLP(gpf1-6, INPUT, DOWN);
+		PIN_SLP(gpf1-7, INPUT, DOWN);
+
+		PIN_SLP(gpf2-0, INPUT, DOWN);
+		PIN_SLP(gpf2-1, INPUT, DOWN);
+		PIN_SLP(gpf2-2, INPUT, DOWN);
+		PIN_SLP(gpf2-3, INPUT, DOWN);
+		PIN_SLP(gpf2-4, INPUT, DOWN);
+		PIN_SLP(gpf2-5, INPUT, DOWN);
+		PIN_SLP(gpf2-6, INPUT, DOWN);
+		PIN_SLP(gpf2-7, INPUT, DOWN);
+
+		PIN_SLP(gpf3-0, INPUT, DOWN);
+		PIN_SLP(gpf3-1, INPUT, DOWN);
+		PIN_SLP(gpf3-2, INPUT, DOWN);
+		PIN_SLP(gpf3-3, INPUT, DOWN);
+		PIN_SLP(gpf3-4, PREV, NONE);
+		PIN_SLP(gpf3-5, OUT0, DOWN);
+
+		PIN_SLP(gpj0-0, INPUT, DOWN);
+		PIN_SLP(gpj0-1, INPUT, DOWN);
+		PIN_SLP(gpj0-2, INPUT, DOWN);
+		PIN_SLP(gpj0-3, OUT0, NONE);
+		PIN_SLP(gpj0-4, INPUT, DOWN);
+		PIN_SLP(gpj0-5, INPUT, DOWN);
+		PIN_SLP(gpj0-6, OUT0, NONE);
+		PIN_SLP(gpj0-7, OUT0, NONE);
+
+		PIN_SLP(gpj1-0, OUT0, NONE);
+		PIN_SLP(gpj1-1, INPUT, DOWN);
+		PIN_SLP(gpj1-2, PREV, NONE);
+		PIN_SLP(gpj1-3, INPUT, DOWN);
+		PIN_SLP(gpj1-4, INPUT, DOWN);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep1>;
+
+	bt_shutdown: bt-shutdown-pins {
+		samsung,pins = "gpl0-6";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_host_wakeup: bt-host-wakeup-pins {
+		samsung,pins = "gpx2-6";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_device_wakeup: bt-device-wakeup-pins {
+		samsung,pins = "gpx3-1";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	backlight_reset: backlight-reset-pins {
+		samsung,pins = "gpm0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	gpio_keys: gpio-keys-pins {
+		samsung,pins = "gpx1-2", "gpx2-2", "gpx2-4", "gpx2-7", "gpx3-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77693_irq: max77693-irq-pins {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	max77693_fuel_irq: max77693-fuel-irq-pins {
+		samsung,pins = "gpx2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sdhci2_cd: sdhci2-cd-irq-pins {
+		samsung,pins = "gpx3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	s5m8767_dvs: s5m8767-dvs-pins {
+		samsung,pins = "gpm3-0", "gpm3-1", "gpm3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	s5m8767_irq: s5m8767-irq-pins {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sleep1: sleep-state {
+		PIN_SLP(gpk0-0, PREV, NONE);
+		PIN_SLP(gpk0-1, PREV, NONE);
+		PIN_SLP(gpk0-2, PREV, NONE);
+		PIN_SLP(gpk0-3, PREV, NONE);
+		PIN_SLP(gpk0-4, PREV, NONE);
+		PIN_SLP(gpk0-5, PREV, NONE);
+		PIN_SLP(gpk0-6, PREV, NONE);
+
+		PIN_SLP(gpk1-0, INPUT, DOWN);
+		PIN_SLP(gpk1-1, INPUT, DOWN);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, PREV, NONE);
+		PIN_SLP(gpk1-4, PREV, NONE);
+		PIN_SLP(gpk1-5, PREV, NONE);
+		PIN_SLP(gpk1-6, PREV, NONE);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpk3-0, OUT0, NONE);
+		PIN_SLP(gpk3-1, INPUT, NONE);
+		PIN_SLP(gpk3-2, INPUT, DOWN);
+		PIN_SLP(gpk3-3, INPUT, NONE);
+		PIN_SLP(gpk3-4, INPUT, NONE);
+		PIN_SLP(gpk3-5, INPUT, NONE);
+		PIN_SLP(gpk3-6, INPUT, NONE);
+
+		PIN_SLP(gpl0-0, INPUT, DOWN);
+		PIN_SLP(gpl0-1, INPUT, NONE);
+		PIN_SLP(gpl0-2, INPUT, NONE);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+		PIN_SLP(gpl0-4, INPUT, DOWN);
+		PIN_SLP(gpl0-6, PREV, NONE);
+
+		PIN_SLP(gpl1-0, INPUT, DOWN);
+		PIN_SLP(gpl1-1, OUT0, NONE);
+		PIN_SLP(gpl2-0, INPUT, DOWN);
+		PIN_SLP(gpl2-1, PREV, NONE);
+		PIN_SLP(gpl2-2, PREV, NONE);
+		PIN_SLP(gpl2-3, INPUT, DOWN);
+		PIN_SLP(gpl2-4, INPUT, DOWN);
+		PIN_SLP(gpl2-5, INPUT, DOWN);
+		PIN_SLP(gpl2-6, INPUT, DOWN);
+		PIN_SLP(gpl2-7, INPUT, DOWN);
+
+		PIN_SLP(gpm0-0, PREV, NONE);
+		PIN_SLP(gpm0-1, OUT0, NONE);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, DOWN);
+		PIN_SLP(gpm0-4, INPUT, DOWN);
+		PIN_SLP(gpm0-5, INPUT, DOWN);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, INPUT, DOWN);
+
+		PIN_SLP(gpm1-0, INPUT, DOWN);
+		PIN_SLP(gpm1-1, INPUT, DOWN);
+		PIN_SLP(gpm1-2, INPUT, NONE);
+		PIN_SLP(gpm1-3, INPUT, NONE);
+		PIN_SLP(gpm1-4, INPUT, NONE);
+		PIN_SLP(gpm1-5, INPUT, NONE);
+		PIN_SLP(gpm1-6, OUT0, NONE);
+
+		PIN_SLP(gpm2-0, INPUT, NONE);
+		PIN_SLP(gpm2-1, INPUT, NONE);
+		PIN_SLP(gpm2-2, OUT0, NONE);
+		PIN_SLP(gpm2-3, INPUT, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, PREV, NONE);
+		PIN_SLP(gpm3-1, PREV, NONE);
+		PIN_SLP(gpm3-2, PREV, NONE);
+		PIN_SLP(gpm3-3, INPUT, DOWN);
+		PIN_SLP(gpm3-4, INPUT, DOWN);
+		PIN_SLP(gpm3-5, PREV, NONE);
+		PIN_SLP(gpm3-6, INPUT, DOWN);
+		PIN_SLP(gpm3-7, OUT0, NONE);
+
+		PIN_SLP(gpm4-0, INPUT, DOWN);
+		PIN_SLP(gpm4-1, INPUT, DOWN);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, PREV, NONE);
+		PIN_SLP(gpm4-5, INPUT, NONE);
+		PIN_SLP(gpm4-6, INPUT, DOWN);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy0-0, INPUT, DOWN);
+		PIN_SLP(gpy0-1, INPUT, DOWN);
+		PIN_SLP(gpy0-2, INPUT, NONE);
+		PIN_SLP(gpy0-3, INPUT, NONE);
+		PIN_SLP(gpy0-4, INPUT, DOWN);
+		PIN_SLP(gpy0-5, INPUT, DOWN);
+
+		PIN_SLP(gpy1-0, INPUT, DOWN);
+		PIN_SLP(gpy1-1, INPUT, DOWN);
+		PIN_SLP(gpy1-2, INPUT, DOWN);
+		PIN_SLP(gpy1-3, INPUT, DOWN);
+
+		PIN_SLP(gpy2-0, PREV, NONE);
+		PIN_SLP(gpy2-1, INPUT, DOWN);
+		PIN_SLP(gpy2-2, INPUT, NONE);
+		PIN_SLP(gpy2-3, INPUT, NONE);
+		PIN_SLP(gpy2-4, INPUT, NONE);
+		PIN_SLP(gpy2-5, INPUT, NONE);
+
+		PIN_SLP(gpy3-0, INPUT, DOWN);
+		PIN_SLP(gpy3-1, INPUT, DOWN);
+		PIN_SLP(gpy3-2, INPUT, DOWN);
+		PIN_SLP(gpy3-3, INPUT, DOWN);
+		PIN_SLP(gpy3-4, INPUT, DOWN);
+		PIN_SLP(gpy3-5, INPUT, DOWN);
+		PIN_SLP(gpy3-6, INPUT, DOWN);
+		PIN_SLP(gpy3-7, INPUT, DOWN);
+
+		PIN_SLP(gpy4-0, INPUT, DOWN);
+		PIN_SLP(gpy4-1, INPUT, DOWN);
+		PIN_SLP(gpy4-2, INPUT, DOWN);
+		PIN_SLP(gpy4-3, INPUT, DOWN);
+		PIN_SLP(gpy4-4, INPUT, DOWN);
+		PIN_SLP(gpy4-5, INPUT, DOWN);
+		PIN_SLP(gpy4-6, INPUT, DOWN);
+		PIN_SLP(gpy4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy5-0, INPUT, DOWN);
+		PIN_SLP(gpy5-1, INPUT, DOWN);
+		PIN_SLP(gpy5-2, INPUT, DOWN);
+		PIN_SLP(gpy5-3, INPUT, DOWN);
+		PIN_SLP(gpy5-4, INPUT, DOWN);
+		PIN_SLP(gpy5-5, INPUT, DOWN);
+		PIN_SLP(gpy5-6, INPUT, DOWN);
+		PIN_SLP(gpy5-7, INPUT, DOWN);
+
+		PIN_SLP(gpy6-0, INPUT, DOWN);
+		PIN_SLP(gpy6-1, INPUT, DOWN);
+		PIN_SLP(gpy6-2, INPUT, DOWN);
+		PIN_SLP(gpy6-3, INPUT, DOWN);
+		PIN_SLP(gpy6-4, INPUT, DOWN);
+		PIN_SLP(gpy6-5, INPUT, DOWN);
+		PIN_SLP(gpy6-6, INPUT, DOWN);
+		PIN_SLP(gpy6-7, INPUT, DOWN);
+	};
+};
+
+&pinctrl_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep2>;
+
+	sleep2: sleep-state {
+		PIN_SLP(gpz-0, INPUT, DOWN);
+		PIN_SLP(gpz-1, INPUT, DOWN);
+		PIN_SLP(gpz-2, INPUT, DOWN);
+		PIN_SLP(gpz-3, INPUT, DOWN);
+		PIN_SLP(gpz-4, INPUT, DOWN);
+		PIN_SLP(gpz-5, INPUT, DOWN);
+		PIN_SLP(gpz-6, INPUT, DOWN);
+	};
+};
+
+&pinctrl_3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep3>;
+
+	sleep3: sleep-state {
+		PIN_SLP(gpv0-0, INPUT, DOWN);
+		PIN_SLP(gpv0-1, INPUT, DOWN);
+		PIN_SLP(gpv0-2, INPUT, DOWN);
+		PIN_SLP(gpv0-3, INPUT, DOWN);
+		PIN_SLP(gpv0-4, INPUT, DOWN);
+		PIN_SLP(gpv0-5, INPUT, DOWN);
+		PIN_SLP(gpv0-6, INPUT, DOWN);
+		PIN_SLP(gpv0-7, INPUT, DOWN);
+
+		PIN_SLP(gpv1-0, INPUT, DOWN);
+		PIN_SLP(gpv1-1, INPUT, DOWN);
+		PIN_SLP(gpv1-2, INPUT, DOWN);
+		PIN_SLP(gpv1-3, INPUT, DOWN);
+		PIN_SLP(gpv1-4, INPUT, DOWN);
+		PIN_SLP(gpv1-5, INPUT, DOWN);
+		PIN_SLP(gpv1-6, INPUT, DOWN);
+		PIN_SLP(gpv1-7, INPUT, DOWN);
+
+		PIN_SLP(gpv2-0, INPUT, DOWN);
+		PIN_SLP(gpv2-1, INPUT, DOWN);
+		PIN_SLP(gpv2-2, INPUT, DOWN);
+		PIN_SLP(gpv2-3, INPUT, DOWN);
+		PIN_SLP(gpv2-4, INPUT, DOWN);
+		PIN_SLP(gpv2-5, INPUT, DOWN);
+		PIN_SLP(gpv2-6, INPUT, DOWN);
+		PIN_SLP(gpv2-7, INPUT, DOWN);
+
+		PIN_SLP(gpv3-0, INPUT, DOWN);
+		PIN_SLP(gpv3-1, INPUT, DOWN);
+		PIN_SLP(gpv3-2, INPUT, DOWN);
+		PIN_SLP(gpv3-3, INPUT, DOWN);
+		PIN_SLP(gpv3-4, INPUT, DOWN);
+		PIN_SLP(gpv3-5, INPUT, DOWN);
+		PIN_SLP(gpv3-6, INPUT, DOWN);
+		PIN_SLP(gpv3-7, INPUT, DOWN);
+
+		PIN_SLP(gpv4-0, INPUT, DOWN);
+		PIN_SLP(gpv4-1, INPUT, DOWN);
+	};
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>;
+};
+
+&pwm {
+	pinctrl-0 = <&pwm1_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <1>;
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo23_reg>;
+	status = "okay";
+};
+
+&sdhci_3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	non-removable;
+	bus-width = <4>;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	pinctrl-0 = <&uart0_data &uart0_fctl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt"; /* BCM4334B0 */
+		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
+		pinctrl-names = "default";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&s5m8767_osc S2MPS11_CLK_BT>;
+	};
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu {
+	vtmu-supply = <&ldo10_reg>;
+	status = "okay";
+};
-- 
2.40.1

Re: [PATCH v3 07/13] Revert "media: exynos4-is: Remove dependency on obsolete SoC support"

[Krzysztof Kozlowski]

On 01/05/2023 21:55, Artur Weber wrote:
> Support for the Exynos4212 SoC was originally dropped as there were
> no boards using it. We will be adding a device that uses it, so add
> it back.
> 
> This reverts commit 2d41a0c9ae51ac363d107f2510022106e7234b33.
> 
> Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
> ---
>  drivers/media/platform/samsung/exynos4-is/Kconfig     | 2 +-
>  drivers/media/platform/samsung/exynos4-is/fimc-core.c | 2 +-
>  drivers/media/platform/samsung/exynos4-is/fimc-lite.c | 2 +-

Subject:
media: Revert "media: Remove dependency on obsolete SoC support"

I assume this will go via media tree. If not, let me know.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v3 08/13] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"

[Krzysztof Kozlowski]

On 01/05/2023 21:55, Artur Weber wrote:
> Support for the Exynos4212 SoC was originally dropped as there were
> no boards using it. We will be adding a device that uses it, so add
> it back.
> 
> This reverts commit fee7e1d50c6e6da1d99035181ba5a5c88f5bb526.

Subject:
phy: Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"

I assume this will go via phy tree. If not, let me know.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: (subset) [PATCH v3 01/13] dt-bindings: soc: samsung: add Exynos4212 PMU compatible

[Krzysztof Kozlowski]

On Mon, 01 May 2023 21:55:13 +0200, Artur Weber wrote:
> Support for the Exynos4212 SoC was originally dropped as there were
> no boards using it. We will be adding a device that uses it, so add
> back the relevant compatible.
> 
> This reverts part of commit c40610198f35 ("soc: samsung: Remove
> Exynos4212 related dead code").
> 
> [...]

Applied, thanks!

[01/13] dt-bindings: soc: samsung: add Exynos4212 PMU compatible
        https://git.kernel.org/krzk/linux/c/8a19d4a1508c62ff28ba427c3209cdb57379d325

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH v3 02/13] dt-bindings: clock: add Exynos4212 clock compatible

[Krzysztof Kozlowski]

On Mon, 01 May 2023 21:55:14 +0200, Artur Weber wrote:
> Support for the Exynos4212 SoC was originally dropped as there were
> no boards using it. We will be adding a device that uses it, so add
> back the relevant compatible.
> 
> 

Applied, thanks!

[02/13] dt-bindings: clock: add Exynos4212 clock compatible
        https://git.kernel.org/krzk/linux/c/5b40732af063c3fa2085b247129f065276c4947c

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH v3 03/13] ARM: exynos: Re-introduce Exynos4212 support

[Krzysztof Kozlowski]

On Mon, 01 May 2023 21:55:15 +0200, Artur Weber wrote:
> Support for the Exynos4212 SoC was originally dropped as there were
> no boards using it. We will be adding a device that uses it, so add
> back the relevant code.
> 
> This reverts commit 9e43eca3c87476f75680f472ff3ebcd85f357b86.
> 
> 
> [...]

Applied, thanks!

[03/13] ARM: exynos: Re-introduce Exynos4212 support
        https://git.kernel.org/krzk/linux/c/4e486a650162a20e5c3c7987715f8297c84c85f4

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH v3 04/13] soc: samsung: Re-introduce Exynos4212 support

[Krzysztof Kozlowski]

On Mon, 01 May 2023 21:55:16 +0200, Artur Weber wrote:
> Support for the Exynos4212 SoC was originally dropped as there were
> no boards using it. We will be adding a device that uses it, so add
> it back.
> 
> This reverts commit c40610198f35e8264f9175dafe74db6288a07eda.
> 
> 
> [...]

Applied, thanks!

[04/13] soc: samsung: Re-introduce Exynos4212 support
        https://git.kernel.org/krzk/linux/c/514a935fd0d4d522a08257f5acbc5439174c7cf0

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH v3 05/13] clk: samsung: Add Exynos4212 compatible to CLKOUT driver

[Krzysztof Kozlowski]

On Mon, 01 May 2023 21:55:17 +0200, Artur Weber wrote:
> Support for the Exynos4212 SoC was originally dropped as there were
> no boards using it. We will be adding a device that uses it, so add
> it back.
> 
> This reverts commit d5cd103b06f9d766295d18798de484528eb120ea.
> 
> 
> [...]

Applied, thanks!

[05/13] clk: samsung: Add Exynos4212 compatible to CLKOUT driver
        https://git.kernel.org/krzk/linux/c/48b359732e166d0f5d53649e21eac8d9343b8e13

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH v3 06/13] clk: samsung: Re-add support for Exynos4212 CPU clock

[Krzysztof Kozlowski]

On Mon, 01 May 2023 21:55:18 +0200, Artur Weber wrote:
> Support for the Exynos4212 SoC was originally dropped as there were
> no boards using it. We will be adding a device that uses it, so add
> it back.
> 
> This reverts commit c9194fb623b0158029a268376df09fe28a2a2b05.
> 
> 
> [...]

Applied, thanks!

[06/13] clk: samsung: Re-add support for Exynos4212 CPU clock
        https://git.kernel.org/krzk/linux/c/40b4ffe5e921a8db911a7e5ffe3ad8da86ac0dfd

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH v3 09/13] ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi

[Krzysztof Kozlowski]

On Mon, 01 May 2023 21:55:21 +0200, Artur Weber wrote:
> In preparation for the re-introduction of the Exynos4212, move
> their shared definitions to a separate file. Rename the pinctrl
> definitions accordingly, and adapt the Exynos4412 DTSI to these
> changes.
> 
> This reverts part of commit bca9085e0ae9 ("ARM: dts: exynos:
> remove Exynos4212 support (dead code)").
> 
> [...]

Applied, thanks!

[09/13] ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi
        https://git.kernel.org/krzk/linux/c/b4354b9761437ba136329e3f2ea1386e8d483e1c

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH v3 10/13] ARM: dts: Re-introduce Exynos4212 DTSI

[Krzysztof Kozlowski]

On Mon, 01 May 2023 21:55:22 +0200, Artur Weber wrote:
> Support for the Exynos4212 SoC was originally dropped as there were
> no boards using it. We will be adding a device that uses it, so add
> it back.
> 
> This reverts commit bca9085e0ae93253bc93ce218c85ac7d7e7f1831.
> 
> 
> [...]

Applied, thanks!

[10/13] ARM: dts: Re-introduce Exynos4212 DTSI
        https://git.kernel.org/krzk/linux/c/41bf1a9f9fbdec5dd1ba69fe26157f42e44dcee4

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH v3 12/13] dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards

[Krzysztof Kozlowski]

On Mon, 01 May 2023 21:55:24 +0200, Artur Weber wrote:
> Add the compatible strings for the Samsung Galaxy Tab 3 8.0 series
> of tablets.
> 
> 

Applied, thanks!

[12/13] dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards
        https://git.kernel.org/krzk/linux/c/fd811cce9b92635799ba5c6de657e4a53c68adf6

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: [PATCH v3 11/13] ARM: dts: exynos: Fix some typos in comments

[Krzysztof Kozlowski]

On 01/05/2023 21:55, Artur Weber wrote:
> Change 'specfic' to 'specific', 'optiosn' to 'options' and remove
> duplicated 'are listed' in DTSI heading comments.
> 
> Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
> ---

This needs rebasing.

Best regards,
Krzysztof

Re: [PATCH v3 13/13] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards

[Krzysztof Kozlowski]

On 01/05/2023 21:55, Artur Weber wrote:
> Introduce support for the Galaxy Tab 3 8.0 series of boards:
> 
>  - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
>  - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
>  - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)
> 
> What works:
> 
>  - Display and backlight
>  - Touchscreen (without touchkeys)
>  - GPIO buttons, hall sensor
>  - WiFi and Bluetooth
>  - USB, fuel gauge, charging
>  - Accelerometer and magnetometer
>  - WiFi model only: light sensor
> 
> Signed-off-by: Artur Weber <aweber.kernel@gmail.com>

Thank you for your patch. There is something to discuss/improve.

> ---
> Changed in v3:
>  - Addressed review comments
>  - Removed rtc node (RTC is provided by PMIC)
>  - Added CPU thermal node
>  - Fixed dtb_check warnings
>  - Added common changes from next/dt
> 
> Display panel bindings are added by a separate patchset:
> "[PATCH 0/3] Add Samsung S6D7AA0 panel controller driver"[1]
> 
> LP855X node is adapted to changes from a separate patchset:
> "[PATCH 0/4] video: backlight: lp855x: modernize bindings"[2]
> 
> [1] https://lore.kernel.org/all/20230501185103.25939-1-aweber.kernel@gmail.com/
> [2] https://lore.kernel.org/all/20230429104534.28943-1-aweber.kernel@gmail.com/

New failures:

arch/arm/boot/dts/exynos4212-tab3-3g8.dtb: rtc@10070000: clocks: [[5,
346]] is too short

> ---
>  arch/arm/boot/dts/Makefile                  |    3 +
>  arch/arm/boot/dts/exynos4212-tab3-3g8.dts   |   29 +
>  arch/arm/boot/dts/exynos4212-tab3-lte8.dts  |   44 +
>  arch/arm/boot/dts/exynos4212-tab3-wifi8.dts |   26 +
>  arch/arm/boot/dts/exynos4212-tab3.dtsi      | 1171 +++++++++++++++++++
>  5 files changed, 1273 insertions(+)
>  create mode 100644 arch/arm/boot/dts/exynos4212-tab3-3g8.dts
>  create mode 100644 arch/arm/boot/dts/exynos4212-tab3-lte8.dts
>  create mode 100644 arch/arm/boot/dts/exynos4212-tab3-wifi8.dts
>  create mode 100644 arch/arm/boot/dts/exynos4212-tab3.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index efe4152e5846..e5f63b636637 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -217,6 +217,9 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
>  	exynos4210-smdkv310.dtb \
>  	exynos4210-trats.dtb \
>  	exynos4210-universal_c210.dtb \
> +	exynos4212-tab3-3g8.dtb \
> +	exynos4212-tab3-lte8.dtb \
> +	exynos4212-tab3-wifi8.dtb \
>  	exynos4412-i9300.dtb \
>  	exynos4412-i9305.dtb \
>  	exynos4412-itop-elite.dtb \
> diff --git a/arch/arm/boot/dts/exynos4212-tab3-3g8.dts b/arch/arm/boot/dts/exynos4212-tab3-3g8.dts
> new file mode 100644
> index 000000000000..6d890353ae76
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4212-tab3-3g8.dts
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung's Exynos4212 based Galaxy Tab 3 8.0 3G board device tree
> + * source
> + *
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + */
> +
> +/dts-v1/;
> +#include "exynos4212-tab3.dtsi"
> +
> +/ {
> +	model = "Samsung Galaxy Tab 3 8.0 3G (SM-T311) based on Exynos4212";
> +	compatible = "samsung,t311", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
> +	chassis-type = "tablet";
> +};
> +
> +/* Pin control sleep state overrides */
> +&sleep0 {
> +		PIN_SLP(gpb-5, INPUT, UP);

Too much indentent.

> +};
> +
> +&sleep1 {
> +		PIN_SLP(gpl0-0, OUT0, NONE);

Same here.

> +		PIN_SLP(gpl1-0, OUT0, NONE);
> +		PIN_SLP(gpl2-4, OUT0, NONE);
> +		PIN_SLP(gpm3-3, OUT1, NONE);
> +};
> diff --git a/arch/arm/boot/dts/exynos4212-tab3-lte8.dts b/arch/arm/boot/dts/exynos4212-tab3-lte8.dts
> new file mode 100644
> index 000000000000..c5ec68c292b0
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4212-tab3-lte8.dts
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung's Exynos4212 based Galaxy Tab 3 8.0 LTE board device tree
> + * source
> + *
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + */
> +
> +/dts-v1/;
> +#include "exynos4212-tab3.dtsi"
> +
> +/ {
> +	model = "Samsung Galaxy Tab 3 8.0 LTE (SM-T315) based on Exynos4212";
> +	compatible = "samsung,t315", "samsung,tab3", "samsung,exynos4212", "samsung,exynos4";
> +	chassis-type = "tablet";
> +};
> +
> +/* Pin control sleep state overrides */
> +&sleep0 {
> +		PIN_SLP(gpa0-4, INPUT, UP);
> +		PIN_SLP(gpa0-5, INPUT, UP);

Same.

> +
> +		PIN_SLP(gpb-5, INPUT, UP);
> +
> +		PIN_SLP(gpc0-0, PREV, NONE);
> +		PIN_SLP(gpc1-3, INPUT, NONE);
> +
> +		PIN_SLP(gpf1-6, INPUT, NONE);
> +		PIN_SLP(gpf2-2, PREV, NONE);
> +};
> +
> +&sleep1 {
> +		PIN_SLP(gpl0-0, PREV, NONE);
> +
> +		PIN_SLP(gpl1-0, PREV, NONE);
> +
> +		PIN_SLP(gpl2-1, INPUT, DOWN);
> +		PIN_SLP(gpl2-2, INPUT, DOWN);
> +		PIN_SLP(gpl2-4, OUT0, NONE);
> +		PIN_SLP(gpl2-5, PREV, NONE);
> +
> +		PIN_SLP(gpm3-3, OUT1, NONE);

...

> +			buck5_reg: BUCK5 {
> +				regulator-name = "VMEM_1.2V_AP";
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt	= <1200000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +				op_mode = <1>;
> +			};
> +
> +			buck6_reg: BUCK6 {
> +				regulator-name = "CAM_ISP_CORE_1.2V";
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt = <1200000>;
> +				op_mode = <1>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +		};
> +
> +		s5m8767_osc: clocks {
> +			compatible = "samsung,s5m8767-clk";
> +			#clock-cells = <1>;
> +			clock-output-names = "en32khz_ap",
> +						 "en32khz_cp",
> +						 "en32khz_bt";

Are these aligned with opening "?

> +		};
> +	};
> +};


Best regards,
Krzysztof

Re: [PATCH v3 00/13] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards

[Krzysztof Kozlowski]

On 01/05/2023 21:55, Artur Weber wrote:
> This patches re-introduces the Exynos4212 platform and adds support
> for the Samsung Galaxy Tab 3 8.0 series of tablets that uses it:
> 
>  - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi)
>  - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g)
>  - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte)
> 
> What works:
> 
>  - Display and backlight
>  - Touchscreen (without touchkeys)
>  - GPIO buttons, hall sensor
>  - WiFi and Bluetooth
>  - USB, fuel gauge, charging
>  - Accelerometer and magnetometer
>  - WiFi model only: light sensor


Thanks for the patches, nice work.

I applied parts of the set. Please:
1. Split the patchset per subsystems, so separate to media, phy and me.
2. Check reviews and resend bindings for display and LP855X.
3. Rebase and check/fix DTS and send a new version. I cannot apply DTS
without bindings being reviewed.


Best regards,
Krzysztof

Re: [PATCH v3 08/13] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"

[Vinod Koul]

On 09-05-23, 19:42, Krzysztof Kozlowski wrote:
> On 01/05/2023 21:55, Artur Weber wrote:
> > Support for the Exynos4212 SoC was originally dropped as there were
> > no boards using it. We will be adding a device that uses it, so add
> > it back.
> > 
> > This reverts commit fee7e1d50c6e6da1d99035181ba5a5c88f5bb526.
> 
> Subject:
> phy: Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"

Right a revert patch is patch which shall follow the sematics
> 
> I assume this will go via phy tree. If not, let me know.

Applied after fixing the title

> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> 
> Best regards,
> Krzysztof

-- 
~Vinod