* [GIT PULL] amlogic defconfig update for v6.7
@ 2023-10-16 8:40 Neil Armstrong
2023-10-17 22:00 ` patchwork-bot+linux-soc
0 siblings, 1 reply; 2+ messages in thread
From: Neil Armstrong @ 2023-10-16 8:40 UTC (permalink / raw)
To: soc, arm; +Cc: linux-amlogic, linux-arm-kernel
Hi,
Here's an Amlogic Defconfig changeset for v6.7 enabling drivers that are
used with most of the Amlogic based boards:
- KEYBOARD_GPIO_POLLED=m used to support buttons on pre-G12A boards, the old
SoC do not support dual-edge gpio interrupts, so we rely on polling instead
- KHADAS_MCU_FAN_THERMAL=m & MFD_KHADAS_MCU=m to control FAN over the MCU on Khadas VIM boards,
those boards have an on-board MCU that controls (in addition of boot stuff) the FAN pins
- MEDIA_CEC_SUPPORT=y & CEC_MESON_G12A_AO=m to enable the CEC bus
- RTC_DRV_PCF8563=m to enable support for RTC on most SBC boards
- VIDEO_MESON_VDEC=m to enable HW Video Decoder
- MESON_DDR_PMU=m to enable DDR PMU perf driver on G12A & SM1 SoCs
Neil
The following changes since commit 0bb80ecc33a8fb5a682236443c1e740d5c917d1d:
Linux 6.6-rc1 (2023-09-10 16:28:41 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git tags/amlogic-defconfig-for-v6.7
for you to fetch changes up to a23bfeda86239d29f18a149a7e658cc3d4e5ef8a:
arm64: defconfig: add various drivers for Amlogic based boards (2023-10-13 09:40:32 +0200)
----------------------------------------------------------------
Amlogic defconfig changes for v6.7:
- add various drivers for Amlogic based boards
- KEYBOARD_GPIO_POLLED=m used to support buttons on pre-G12A boards
- KHADAS_MCU_FAN_THERMAL=m & MFD_KHADAS_MCU=m to control FAN over the MCU on Khadas VIM boards
- MEDIA_CEC_SUPPORT=y & CEC_MESON_G12A_AO=m to enable the CEC bus
- RTC_DRV_PCF8563=m to enable support for RTC on most SBC boards
- VIDEO_MESON_VDEC=m to enable HW Video Decoder
- MESON_DDR_PMU=m to enable DDR PMU perf driver on G12A & SM1 SoCs
----------------------------------------------------------------
Marek Szyprowski (1):
arm64: defconfig: add various drivers for Amlogic based boards
arch/arm64/configs/defconfig | 8 ++++++++
1 file changed, 8 insertions(+)
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] amlogic defconfig update for v6.7
2023-10-16 8:40 [GIT PULL] amlogic defconfig update for v6.7 Neil Armstrong
@ 2023-10-17 22:00 ` patchwork-bot+linux-soc
0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+linux-soc @ 2023-10-17 22:00 UTC (permalink / raw)
To: Neil Armstrong; +Cc: soc
Hello:
This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:
On Mon, 16 Oct 2023 10:40:46 +0200 you wrote:
> Hi,
>
> Here's an Amlogic Defconfig changeset for v6.7 enabling drivers that are
> used with most of the Amlogic based boards:
> - KEYBOARD_GPIO_POLLED=m used to support buttons on pre-G12A boards, the old
> SoC do not support dual-edge gpio interrupts, so we rely on polling instead
> - KHADAS_MCU_FAN_THERMAL=m & MFD_KHADAS_MCU=m to control FAN over the MCU on Khadas VIM boards,
> those boards have an on-board MCU that controls (in addition of boot stuff) the FAN pins
> - MEDIA_CEC_SUPPORT=y & CEC_MESON_G12A_AO=m to enable the CEC bus
> - RTC_DRV_PCF8563=m to enable support for RTC on most SBC boards
> - VIDEO_MESON_VDEC=m to enable HW Video Decoder
> - MESON_DDR_PMU=m to enable DDR PMU perf driver on G12A & SM1 SoCs
>
> [...]
Here is the summary with links:
- [GIT,PULL] amlogic defconfig update for v6.7
https://git.kernel.org/soc/soc/c/40fa0489a294
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-10-17 22:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-10-16 8:40 [GIT PULL] amlogic defconfig update for v6.7 Neil Armstrong
2023-10-17 22:00 ` patchwork-bot+linux-soc
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).