[GIT PULL] arm64: dts: ZynqMP DT changes for v6.6

[GIT PULL] arm64: dts: ZynqMP DT changes for v6.6

[Michal Simek]

Hi,

please pull these changes to your tree.

Thanks,
Michal

The following changes since commit 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5:

   Linux 6.5-rc1 (2023-07-09 13:53:13 -0700)

are available in the Git repository at:

   https://github.com/Xilinx/linux-xlnx.git tags/zynqmp-dt-for-6.6

for you to fetch changes up to cf0e27cd011775f63001e1e925969106c9464fca:

   arm64: zynqmp: Describe interrupts by using macros (2023-07-27 08:29:50 +0200)

----------------------------------------------------------------
arm64: ZynqMP DT changes for v6.6

- Describe caches
- Fix i2c gpio recovery description
- Setting up default i2c frequency
- Describe GEM TSU clock and assigned rates for SOMs
- Reserved 1MB for internal firmware usage
- Fix dwc3 IRQ description
- Describe interrupts by using macros

----------------------------------------------------------------
Harini Katakam (1):
       arm64: zynqmp: Assign TSU clock frequency for GEMs

Manikanta Guntupalli (1):
       arm64: zynqmp: Fix open drain warning on ZynqMP

Michal Simek (2):
       arm64: zynqmp: Fix dwc3 usb interrupt description
       arm64: zynqmp: Describe interrupts by using macros

Radhey Shyam Pandey (1):
       arm64: zynqmp: Add L2 cache nodes

Sharath Kumar Dasari (1):
       arm64: zynqmp: Add memory reserved node for k26 Kria SOM board

Varalaxmi Bingi (1):
       arm64: zynqmp: Setting default i2c clock frequency to 400kHz

  arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi         |   4 +
  arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso   |   5 +-
  arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso   |   5 +-
  arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts      |  15 +-
  arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts |   4 +-
  arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts |   4 +-
  arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts |   8 +-
  arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts      |   4 +-
  arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts      |   8 +-
  arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts      |   4 +-
  arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts      |   4 +-
  arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts      |   8 +-
  arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts      |   8 +-
  arch/arm64/boot/dts/xilinx/zynqmp.dtsi                 | 201 ++++++++++++--------
  14 files changed, 173 insertions(+), 109 deletions(-)

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP/Versal ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal/Versal NET SoCs
TF-A maintainer - Xilinx ZynqMP/Versal/Versal NET SoCs

Re: [GIT PULL] arm64: dts: ZynqMP DT changes for v6.6

[patchwork-bot+linux-soc]

Hello:

This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:

On Fri, 4 Aug 2023 13:22:32 +0200 you wrote:
> Hi,
> 
> please pull these changes to your tree.
> 
> Thanks,
> Michal
> 
> [...]

Here is the summary with links:
  - [GIT,PULL] arm64: dts: ZynqMP DT changes for v6.6
    https://git.kernel.org/soc/soc/c/e5963e159655

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html