FAILED: patch "[PATCH] mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI" failed to apply to 5.15-stable tree

FAILED: patch "[PATCH] mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI" failed to apply to 5.15-stable tree

[gregkh]

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

Possible dependencies:

56baa208f910 ("mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI")
6bcc55fe648b ("mmc: sdhci-brcmstb: Enable Clock Gating to save power")
f3a70f991dd0 ("mmc: sdhci-brcmstb: Re-organize flags")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 56baa208f91061ff27ec2d93fbc483f624d373b4 Mon Sep 17 00:00:00 2001
From: Brian Norris <briannorris@chromium.org>
Date: Wed, 26 Oct 2022 12:42:05 -0700
Subject: [PATCH] mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI

[[ NOTE: this is completely untested by the author, but included solely
    because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix
    SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
    drivers using CQHCI might benefit from a similar change, if they
    also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
    bug on at least MSM, Arasan, and Intel hardware. ]]

SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.

It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.

Include this fix by way of the new sdhci_and_cqhci_reset() helper.

I only patch the bcm7216 variant even though others potentially *could*
provide the 'supports-cqe' property (and thus enable CQHCI), because
d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing
(CQE)") and some Broadcom folks confirm that only the 7216 variant
actually supports it.

This patch depends on (and should not compile without) the patch
entitled "mmc: cqhci: Provide helper for resetting both SDHCI and
CQHCI".

Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026124150.v4.3.I6a715feab6d01f760455865e968ecf0d85036018@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index aff36a933ebe..55d8bd232695 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -12,6 +12,7 @@
 #include <linux/bitops.h>
 #include <linux/delay.h>
 
+#include "sdhci-cqhci.h"
 #include "sdhci-pltfm.h"
 #include "cqhci.h"
 
@@ -55,7 +56,7 @@ static void brcmstb_reset(struct sdhci_host *host, u8 mask)
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
 
-	sdhci_reset(host, mask);
+	sdhci_and_cqhci_reset(host, mask);
 
 	/* Reset will clear this, so re-enable it */
 	if (priv->flags & BRCMSTB_PRIV_FLAGS_GATE_CLOCK)