* Re: [PATCH RESEND][for-stable 5.10, 5.4, 4.19, 4.14] ext4: fix kernel BUG in 'ext4_write_inline_data_end()'
[not found] <20230307103840.2603092-1-tudor.ambarus@linaro.org>
@ 2023-03-30 11:42 ` Tudor Ambarus
2023-03-30 12:01 ` Greg KH
0 siblings, 1 reply; 5+ messages in thread
From: Tudor Ambarus @ 2023-03-30 11:42 UTC (permalink / raw)
To: stable, stable
Cc: tytso, adilger.kernel, boyu.mt, linux-ext4, linux-kernel,
leejones, Ye Bin, syzbot+4faa160fa96bfba639f8, Jun Nie
+ stable@vger.kernel.org
Hi!
Can we queue this to Linux stable, please?
Thanks,
ta
On 3/7/23 10:38, Tudor Ambarus wrote:
> From: Ye Bin <yebin10@huawei.com>
>
> [ Upstream commit 5c099c4fdc438014d5893629e70a8ba934433ee8 ]
>
> tudor.ambarus@linaro.org: The patch deviates from original upstream
> patch, as it had to be backported. Backport this 3 line patch instead
> of carring it's dependency:
> 'commit 6984aef59814 ("ext4: factor out write end code of inline file")'
> The dependency conflicts with
> 'commit a54c4613dac1 ("ext4: fix race writing to an inline_data file while its xattrs are changing")'
> and was fixed in:
> 'commit 11ef08c9eb52 ("Merge branch 'delalloc-buffer-write' into dev")'
> Even if backporting the dependency is straight forward (keep the
> contents of the second patch together with the changes from the first)
> choose to backport just the fix as the refactoring patch brings little
> benefit and high risk. Tested the fix with the reproducer and it no longer
> complains on linux-{5.10, 5.4, 4.19, 4.14}.y. The original upstream commit
> message follows below.
>
> Syzbot report follow issue:
> ------------[ cut here ]------------
> kernel BUG at fs/ext4/inline.c:227!
> invalid opcode: 0000 [#1] PREEMPT SMP KASAN
> CPU: 1 PID: 3629 Comm: syz-executor212 Not tainted 6.1.0-rc5-syzkaller-00018-g59d0d52c30d4 #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
> RIP: 0010:ext4_write_inline_data+0x344/0x3e0 fs/ext4/inline.c:227
> RSP: 0018:ffffc90003b3f368 EFLAGS: 00010293
> RAX: 0000000000000000 RBX: ffff8880704e16c0 RCX: 0000000000000000
> RDX: ffff888021763a80 RSI: ffffffff821e31a4 RDI: 0000000000000006
> RBP: 000000000006818e R08: 0000000000000006 R09: 0000000000068199
> R10: 0000000000000079 R11: 0000000000000000 R12: 000000000000000b
> R13: 0000000000068199 R14: ffffc90003b3f408 R15: ffff8880704e1c82
> FS: 000055555723e3c0(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007fffe8ac9080 CR3: 0000000079f81000 CR4: 0000000000350ee0
> Call Trace:
> <TASK>
> ext4_write_inline_data_end+0x2a3/0x12f0 fs/ext4/inline.c:768
> ext4_write_end+0x242/0xdd0 fs/ext4/inode.c:1313
> ext4_da_write_end+0x3ed/0xa30 fs/ext4/inode.c:3063
> generic_perform_write+0x316/0x570 mm/filemap.c:3764
> ext4_buffered_write_iter+0x15b/0x460 fs/ext4/file.c:285
> ext4_file_write_iter+0x8bc/0x16e0 fs/ext4/file.c:700
> call_write_iter include/linux/fs.h:2191 [inline]
> do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735
> do_iter_write+0x182/0x700 fs/read_write.c:861
> vfs_iter_write+0x74/0xa0 fs/read_write.c:902
> iter_file_splice_write+0x745/0xc90 fs/splice.c:686
> do_splice_from fs/splice.c:764 [inline]
> direct_splice_actor+0x114/0x180 fs/splice.c:931
> splice_direct_to_actor+0x335/0x8a0 fs/splice.c:886
> do_splice_direct+0x1ab/0x280 fs/splice.c:974
> do_sendfile+0xb19/0x1270 fs/read_write.c:1255
> __do_sys_sendfile64 fs/read_write.c:1323 [inline]
> __se_sys_sendfile64 fs/read_write.c:1309 [inline]
> __x64_sys_sendfile64+0x1d0/0x210 fs/read_write.c:1309
> do_syscall_x64 arch/x86/entry/common.c:50 [inline]
> do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
> entry_SYSCALL_64_after_hwframe+0x63/0xcd
> ---[ end trace 0000000000000000 ]---
>
> Above issue may happens as follows:
> ext4_da_write_begin
> ext4_da_write_inline_data_begin
> ext4_da_convert_inline_data_to_extent
> ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
> ext4_da_write_end
>
> ext4_run_li_request
> ext4_mb_prefetch
> ext4_read_block_bitmap_nowait
> ext4_validate_block_bitmap
> ext4_mark_group_bitmap_corrupted(sb, block_group, EXT4_GROUP_INFO_BBITMAP_CORRUPT)
> percpu_counter_sub(&sbi->s_freeclusters_counter,grp->bb_free);
> -> sbi->s_freeclusters_counter become zero
> ext4_da_write_begin
> if (ext4_nonda_switch(inode->i_sb)) -> As freeclusters_counter is zero will return true
> *fsdata = (void *)FALL_BACK_TO_NONDELALLOC;
> ext4_write_begin
> ext4_da_write_end
> if (write_mode == FALL_BACK_TO_NONDELALLOC)
> ext4_write_end
> if (inline_data)
> ext4_write_inline_data_end
> ext4_write_inline_data
> BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);
> -> As inode is already convert to extent, so 'pos + len' > inline_size
> -> then trigger BUG.
>
> To solve this issue, instead of checking ext4_has_inline_data() which
> is only cleared after data has been written back, check the
> EXT4_STATE_MAY_INLINE_DATA flag in ext4_write_end().
>
> Fixes: f19d5870cbf7 ("ext4: add normal write support for inline data")
> Reported-by: syzbot+4faa160fa96bfba639f8@syzkaller.appspotmail.com
> Reported-by: Jun Nie <jun.nie@linaro.org>
> Signed-off-by: Ye Bin <yebin10@huawei.com>
> Link: https://lore.kernel.org/r/20221206144134.1919987-1-yebin@huaweicloud.com
> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
> Cc: stable@kernel.org
> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
> ---
> For RESEND I put stable@kernel.org in To:
>
> fs/ext4/inode.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 355343cf4609..7ac3fa2863c7 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -1303,7 +1303,8 @@ static int ext4_write_end(struct file *file,
> bool verity = ext4_verity_in_progress(inode);
>
> trace_ext4_write_end(inode, pos, len, copied);
> - if (inline_data) {
> + if (inline_data &&
> + ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) {
> ret = ext4_write_inline_data_end(inode, pos, len,
> copied, page);
> if (ret < 0) {
^ permalink raw reply [flat|nested] 5+ messages in thread