* build failures in v4.4.y stable queue
@ 2020-11-04 14:12 Guenter Roeck
2020-11-04 14:37 ` Greg KH
0 siblings, 1 reply; 6+ messages in thread
From: Guenter Roeck @ 2020-11-04 14:12 UTC (permalink / raw)
To: stable; +Cc: gregkh, sashal
Building ia64:defconfig ... failed
--------------
Error log:
drivers/acpi/numa.c: In function 'pxm_to_node':
drivers/acpi/numa.c:49:43: error: 'numa_off' undeclared
Building powerpc:defconfig ... failed
--------------
Error log:
arch/powerpc/kvm/book3s_hv.c: In function ‘kvm_arch_vm_ioctl_hv’:
arch/powerpc/kvm/book3s_hv.c:3161:7: error: implicit declaration of function ‘kvmhv_on_pseries’
Guenter
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: build failures in v4.4.y stable queue
2020-11-04 14:12 build failures in v4.4.y stable queue Guenter Roeck
@ 2020-11-04 14:37 ` Greg KH
2020-11-04 16:18 ` Sasha Levin
0 siblings, 1 reply; 6+ messages in thread
From: Greg KH @ 2020-11-04 14:37 UTC (permalink / raw)
To: Guenter Roeck; +Cc: stable, sashal
On Wed, Nov 04, 2020 at 06:12:30AM -0800, Guenter Roeck wrote:
> Building ia64:defconfig ... failed
> --------------
> Error log:
> drivers/acpi/numa.c: In function 'pxm_to_node':
> drivers/acpi/numa.c:49:43: error: 'numa_off' undeclared
Caused by 8a3decac087a ("ACPI: Add out of bounds and numa_off
protections to pxm_to_node()"), I'll go drop it.
Sasha, you didn't queue this up to 4.9, but you did to 4.4?
>
> Building powerpc:defconfig ... failed
> --------------
> Error log:
> arch/powerpc/kvm/book3s_hv.c: In function ‘kvm_arch_vm_ioctl_hv’:
> arch/powerpc/kvm/book3s_hv.c:3161:7: error: implicit declaration of function ‘kvmhv_on_pseries’
Caused by 05e6295dc7de ("KVM: PPC: Book3S HV: Do not allocate HPT for a
nested guest"), I'll go drop this.
Sasha, why did you only queue this up to 4.4 and 5.4 and 5.9 and not the
middle queues as well?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: build failures in v4.4.y stable queue
2020-11-04 14:37 ` Greg KH
@ 2020-11-04 16:18 ` Sasha Levin
2020-11-05 2:34 ` Guenter Roeck
0 siblings, 1 reply; 6+ messages in thread
From: Sasha Levin @ 2020-11-04 16:18 UTC (permalink / raw)
To: Greg KH; +Cc: Guenter Roeck, stable
On Wed, Nov 04, 2020 at 03:37:09PM +0100, Greg KH wrote:
>On Wed, Nov 04, 2020 at 06:12:30AM -0800, Guenter Roeck wrote:
>> Building ia64:defconfig ... failed
>> --------------
>> Error log:
>> drivers/acpi/numa.c: In function 'pxm_to_node':
>> drivers/acpi/numa.c:49:43: error: 'numa_off' undeclared
>
>Caused by 8a3decac087a ("ACPI: Add out of bounds and numa_off
>protections to pxm_to_node()"), I'll go drop it.
>
>Sasha, you didn't queue this up to 4.9, but you did to 4.4?
>
>>
>> Building powerpc:defconfig ... failed
>> --------------
>> Error log:
>> arch/powerpc/kvm/book3s_hv.c: In function ‘kvm_arch_vm_ioctl_hv’:
>> arch/powerpc/kvm/book3s_hv.c:3161:7: error: implicit declaration of function ‘kvmhv_on_pseries’
>
>Caused by 05e6295dc7de ("KVM: PPC: Book3S HV: Do not allocate HPT for a
>nested guest"), I'll go drop this.
>
>Sasha, why did you only queue this up to 4.4 and 5.4 and 5.9 and not the
>middle queues as well?
Originally it got queued everywhere, but then it looks like I dropped it
from 4.9-4.19 because of build failures, but it seems that the 4.4
failure wasn't detected.
Looking into why, it seems that my baseline for that build also fails
for some reason:
../../../../linux/arch/powerpc/kernel/exceptions-64s.S: Assembler messages:
../../../../linux/arch/powerpc/kernel/exceptions-64s.S:1603: Warning: invalid register expression
../../../../linux/arch/powerpc/kernel/exceptions-64s.S:1644: Warning: invalid register expression
../../../../linux/arch/powerpc/kernel/exceptions-64s.S:839: Error: attempt to move .org backwards
../../../../linux/arch/powerpc/kernel/exceptions-64s.S:840: Error: attempt to move .org backwards
../../../../linux/arch/powerpc/kernel/exceptions-64s.S:864: Error: attempt to move .org backwards
../../../../linux/arch/powerpc/kernel/exceptions-64s.S:865: Error: attempt to move .org backwards
make[2]: *** [/home/sasha/data/linux/scripts/Makefile.build:375: arch/powerpc/kernel/head_64.o] Error 1
make[1]: *** [/home/sasha/data/linux/Makefile:1006: arch/powerpc/kernel] Error 2
I think that I'll rebuild my toolchain for powerpc and redo the baseline
builds, sorry about that.
--
Thanks,
Sasha
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: build failures in v4.4.y stable queue
2020-11-04 16:18 ` Sasha Levin
@ 2020-11-05 2:34 ` Guenter Roeck
2020-11-09 0:19 ` Sasha Levin
0 siblings, 1 reply; 6+ messages in thread
From: Guenter Roeck @ 2020-11-05 2:34 UTC (permalink / raw)
To: Sasha Levin, Greg KH; +Cc: stable
On 11/4/20 8:18 AM, Sasha Levin wrote:
> On Wed, Nov 04, 2020 at 03:37:09PM +0100, Greg KH wrote:
>> On Wed, Nov 04, 2020 at 06:12:30AM -0800, Guenter Roeck wrote:
>>> Building ia64:defconfig ... failed
>>> --------------
>>> Error log:
>>> drivers/acpi/numa.c: In function 'pxm_to_node':
>>> drivers/acpi/numa.c:49:43: error: 'numa_off' undeclared
>>
>> Caused by 8a3decac087a ("ACPI: Add out of bounds and numa_off
>> protections to pxm_to_node()"), I'll go drop it.
>>
>> Sasha, you didn't queue this up to 4.9, but you did to 4.4?
>>
>>>
>>> Building powerpc:defconfig ... failed
>>> --------------
>>> Error log:
>>> arch/powerpc/kvm/book3s_hv.c: In function ‘kvm_arch_vm_ioctl_hv’:
>>> arch/powerpc/kvm/book3s_hv.c:3161:7: error: implicit declaration of function ‘kvmhv_on_pseries’
>>
>> Caused by 05e6295dc7de ("KVM: PPC: Book3S HV: Do not allocate HPT for a
>> nested guest"), I'll go drop this.
>>
>> Sasha, why did you only queue this up to 4.4 and 5.4 and 5.9 and not the
>> middle queues as well?
>
> Originally it got queued everywhere, but then it looks like I dropped it
> from 4.9-4.19 because of build failures, but it seems that the 4.4
> failure wasn't detected.
>
> Looking into why, it seems that my baseline for that build also fails
> for some reason:
>
> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S: Assembler messages:
> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:1603: Warning: invalid register expression
> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:1644: Warning: invalid register expression
> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:839: Error: attempt to move .org backwards
> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:840: Error: attempt to move .org backwards
> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:864: Error: attempt to move .org backwards
> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:865: Error: attempt to move .org backwards
> make[2]: *** [/home/sasha/data/linux/scripts/Makefile.build:375: arch/powerpc/kernel/head_64.o] Error 1
> make[1]: *** [/home/sasha/data/linux/Makefile:1006: arch/powerpc/kernel] Error 2
>
> I think that I'll rebuild my toolchain for powerpc and redo the baseline
> builds, sorry about that.
>
Is that an allmodconfig build ? That simply won't build in 4.4.y because
exceptions-64s.S is too large there.
Guenter
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: build failures in v4.4.y stable queue
2020-11-05 2:34 ` Guenter Roeck
@ 2020-11-09 0:19 ` Sasha Levin
2020-11-09 0:47 ` Guenter Roeck
0 siblings, 1 reply; 6+ messages in thread
From: Sasha Levin @ 2020-11-09 0:19 UTC (permalink / raw)
To: Guenter Roeck; +Cc: Greg KH, stable
On Wed, Nov 04, 2020 at 06:34:50PM -0800, Guenter Roeck wrote:
>On 11/4/20 8:18 AM, Sasha Levin wrote:
>> On Wed, Nov 04, 2020 at 03:37:09PM +0100, Greg KH wrote:
>>> On Wed, Nov 04, 2020 at 06:12:30AM -0800, Guenter Roeck wrote:
>>>> Building ia64:defconfig ... failed
>>>> --------------
>>>> Error log:
>>>> drivers/acpi/numa.c: In function 'pxm_to_node':
>>>> drivers/acpi/numa.c:49:43: error: 'numa_off' undeclared
>>>
>>> Caused by 8a3decac087a ("ACPI: Add out of bounds and numa_off
>>> protections to pxm_to_node()"), I'll go drop it.
>>>
>>> Sasha, you didn't queue this up to 4.9, but you did to 4.4?
>>>
>>>>
>>>> Building powerpc:defconfig ... failed
>>>> --------------
>>>> Error log:
>>>> arch/powerpc/kvm/book3s_hv.c: In function ‘kvm_arch_vm_ioctl_hv’:
>>>> arch/powerpc/kvm/book3s_hv.c:3161:7: error: implicit declaration of function ‘kvmhv_on_pseries’
>>>
>>> Caused by 05e6295dc7de ("KVM: PPC: Book3S HV: Do not allocate HPT for a
>>> nested guest"), I'll go drop this.
>>>
>>> Sasha, why did you only queue this up to 4.4 and 5.4 and 5.9 and not the
>>> middle queues as well?
>>
>> Originally it got queued everywhere, but then it looks like I dropped it
>> from 4.9-4.19 because of build failures, but it seems that the 4.4
>> failure wasn't detected.
>>
>> Looking into why, it seems that my baseline for that build also fails
>> for some reason:
>>
>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S: Assembler messages:
>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:1603: Warning: invalid register expression
>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:1644: Warning: invalid register expression
>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:839: Error: attempt to move .org backwards
>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:840: Error: attempt to move .org backwards
>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:864: Error: attempt to move .org backwards
>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:865: Error: attempt to move .org backwards
>> make[2]: *** [/home/sasha/data/linux/scripts/Makefile.build:375: arch/powerpc/kernel/head_64.o] Error 1
>> make[1]: *** [/home/sasha/data/linux/Makefile:1006: arch/powerpc/kernel] Error 2
>>
>> I think that I'll rebuild my toolchain for powerpc and redo the baseline
>> builds, sorry about that.
>>
>
>Is that an allmodconfig build ? That simply won't build in 4.4.y because
>exceptions-64s.S is too large there.
But only on 4.4, and not on 4.9+? sheesh...
--
Thanks,
Sasha
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: build failures in v4.4.y stable queue
2020-11-09 0:19 ` Sasha Levin
@ 2020-11-09 0:47 ` Guenter Roeck
0 siblings, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2020-11-09 0:47 UTC (permalink / raw)
To: Sasha Levin; +Cc: Greg KH, stable
On 11/8/20 4:19 PM, Sasha Levin wrote:
> On Wed, Nov 04, 2020 at 06:34:50PM -0800, Guenter Roeck wrote:
>> On 11/4/20 8:18 AM, Sasha Levin wrote:
>>> On Wed, Nov 04, 2020 at 03:37:09PM +0100, Greg KH wrote:
>>>> On Wed, Nov 04, 2020 at 06:12:30AM -0800, Guenter Roeck wrote:
>>>>> Building ia64:defconfig ... failed
>>>>> --------------
>>>>> Error log:
>>>>> drivers/acpi/numa.c: In function 'pxm_to_node':
>>>>> drivers/acpi/numa.c:49:43: error: 'numa_off' undeclared
>>>>
>>>> Caused by 8a3decac087a ("ACPI: Add out of bounds and numa_off
>>>> protections to pxm_to_node()"), I'll go drop it.
>>>>
>>>> Sasha, you didn't queue this up to 4.9, but you did to 4.4?
>>>>
>>>>>
>>>>> Building powerpc:defconfig ... failed
>>>>> --------------
>>>>> Error log:
>>>>> arch/powerpc/kvm/book3s_hv.c: In function ‘kvm_arch_vm_ioctl_hv’:
>>>>> arch/powerpc/kvm/book3s_hv.c:3161:7: error: implicit declaration of function ‘kvmhv_on_pseries’
>>>>
>>>> Caused by 05e6295dc7de ("KVM: PPC: Book3S HV: Do not allocate HPT for a
>>>> nested guest"), I'll go drop this.
>>>>
>>>> Sasha, why did you only queue this up to 4.4 and 5.4 and 5.9 and not the
>>>> middle queues as well?
>>>
>>> Originally it got queued everywhere, but then it looks like I dropped it
>>> from 4.9-4.19 because of build failures, but it seems that the 4.4
>>> failure wasn't detected.
>>>
>>> Looking into why, it seems that my baseline for that build also fails
>>> for some reason:
>>>
>>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S: Assembler messages:
>>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:1603: Warning: invalid register expression
>>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:1644: Warning: invalid register expression
>>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:839: Error: attempt to move .org backwards
>>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:840: Error: attempt to move .org backwards
>>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:864: Error: attempt to move .org backwards
>>> ../../../../linux/arch/powerpc/kernel/exceptions-64s.S:865: Error: attempt to move .org backwards
>>> make[2]: *** [/home/sasha/data/linux/scripts/Makefile.build:375: arch/powerpc/kernel/head_64.o] Error 1
>>> make[1]: *** [/home/sasha/data/linux/Makefile:1006: arch/powerpc/kernel] Error 2
>>>
>>> I think that I'll rebuild my toolchain for powerpc and redo the baseline
>>> builds, sorry about that.
>>>
>>
>> Is that an allmodconfig build ? That simply won't build in 4.4.y because
>> exceptions-64s.S is too large there.
>
> But only on 4.4, and not on 4.9+? sheesh...
>
The file was rearranged in later kernel versions. I tried a long time ago
to find a minimum set of necessary patches to apply, but gave up after
a while. Feel free to give it a try yourself :-)
Guenter
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-11-09 0:47 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-04 14:12 build failures in v4.4.y stable queue Guenter Roeck
2020-11-04 14:37 ` Greg KH
2020-11-04 16:18 ` Sasha Levin
2020-11-05 2:34 ` Guenter Roeck
2020-11-09 0:19 ` Sasha Levin
2020-11-09 0:47 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).