[PATCH 4.9 1/2] Revert "Btrfs: fix scrub to repair raid6 corruption"

[PATCH 4.9 1/2] Revert "Btrfs: fix scrub to repair raid6 corruption"

[Sasha Levin]

This reverts commit 186a6519dc94964a4c5c68fca482f20f71551f26.

This commit used an incorrect log message.

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/raid56.c  | 18 ++++--------------
 fs/btrfs/volumes.c |  9 +--------
 2 files changed, 5 insertions(+), 22 deletions(-)

diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c
index af6a776fa18c..d016d4a79864 100644
--- a/fs/btrfs/raid56.c
+++ b/fs/btrfs/raid56.c
@@ -2161,21 +2161,11 @@ int raid56_parity_recover(struct btrfs_root *root, struct bio *bio,
 	}
 
 	/*
-	 * Loop retry:
-	 * for 'mirror == 2', reconstruct from all other stripes.
-	 * for 'mirror_num > 2', select a stripe to fail on every retry.
+	 * reconstruct from the q stripe if they are
+	 * asking for mirror 3
 	 */
-	if (mirror_num > 2) {
-		/*
-		 * 'mirror == 3' is to fail the p stripe and
-		 * reconstruct from the q stripe.  'mirror > 3' is to
-		 * fail a data stripe and reconstruct from p+q stripe.
-		 */
-		rbio->failb = rbio->real_stripes - (mirror_num - 1);
-		ASSERT(rbio->failb > 0);
-		if (rbio->failb <= rbio->faila)
-			rbio->failb--;
-	}
+	if (mirror_num == 3)
+		rbio->failb = rbio->real_stripes - 2;
 
 	ret = lock_stripe_add(rbio);
 
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 76017e1b3c0f..c2495cde26f6 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -5186,14 +5186,7 @@ int btrfs_num_copies(struct btrfs_fs_info *fs_info, u64 logical, u64 len)
 	else if (map->type & BTRFS_BLOCK_GROUP_RAID5)
 		ret = 2;
 	else if (map->type & BTRFS_BLOCK_GROUP_RAID6)
-		/*
-		 * There could be two corrupted data stripes, we need
-		 * to loop retry in order to rebuild the correct data.
-		 *
-		 * Fail a stripe at a time on every retry except the
-		 * stripe under reconstruction.
-		 */
-		ret = map->num_stripes;
+		ret = 3;
 	else
 		ret = 1;
 	free_extent_map(em);
-- 
2.17.1

[PATCH 4.9 2/2] Btrfs: make raid6 rebuild retry more

[Sasha Levin]

From: Liu Bo <bo.li.liu@oracle.com>

[ Upstream commit 8810f7517a3bc4ca2d41d022446d3f5fd6b77c09 ]

There is a scenario that can end up with rebuild process failing to
return good content, i.e.
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,

- the 1st retry is to rebuild with all other stripes, it'll eventually
  be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
  that it will do raid6 style rebuild,

however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content, and users will think of this as data loss.
More seriouly, if the loss happens on some important internal btree
roots, it could refuse to mount.

This extends btrfs to do more retries and each retry fails only one
stripe.  Since raid6 can tolerate 2 disk failures, if there is one
more failure besides the failure on which we're recovering, this can
always work.

The worst case is to retry as many times as the number of raid6 disks,
but given the fact that such a scenario is really rare in practice,
it's still acceptable.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/raid56.c  | 18 ++++++++++++++----
 fs/btrfs/volumes.c |  9 ++++++++-
 2 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c
index d016d4a79864..af6a776fa18c 100644
--- a/fs/btrfs/raid56.c
+++ b/fs/btrfs/raid56.c
@@ -2161,11 +2161,21 @@ int raid56_parity_recover(struct btrfs_root *root, struct bio *bio,
 	}
 
 	/*
-	 * reconstruct from the q stripe if they are
-	 * asking for mirror 3
+	 * Loop retry:
+	 * for 'mirror == 2', reconstruct from all other stripes.
+	 * for 'mirror_num > 2', select a stripe to fail on every retry.
 	 */
-	if (mirror_num == 3)
-		rbio->failb = rbio->real_stripes - 2;
+	if (mirror_num > 2) {
+		/*
+		 * 'mirror == 3' is to fail the p stripe and
+		 * reconstruct from the q stripe.  'mirror > 3' is to
+		 * fail a data stripe and reconstruct from p+q stripe.
+		 */
+		rbio->failb = rbio->real_stripes - (mirror_num - 1);
+		ASSERT(rbio->failb > 0);
+		if (rbio->failb <= rbio->faila)
+			rbio->failb--;
+	}
 
 	ret = lock_stripe_add(rbio);
 
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index c2495cde26f6..25f450a0529d 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -5186,7 +5186,14 @@ int btrfs_num_copies(struct btrfs_fs_info *fs_info, u64 logical, u64 len)
 	else if (map->type & BTRFS_BLOCK_GROUP_RAID5)
 		ret = 2;
 	else if (map->type & BTRFS_BLOCK_GROUP_RAID6)
-		ret = 3;
+		/*
+		 * There could be two corrupted data stripes, we need
+		 * to loop retry in order to rebuild the correct data.
+		 * 
+		 * Fail a stripe at a time on every retry except the
+		 * stripe under reconstruction.
+		 */
+		ret = map->num_stripes;
 	else
 		ret = 1;
 	free_extent_map(em);
-- 
2.17.1

[PATCH 4.9 2/2] Btrfs: make raid6 rebuild retry more

[Sasha Levin]

From: Liu Bo <bo.li.liu@oracle.com>

[ Upstream commit 8810f7517a3bc4ca2d41d022446d3f5fd6b77c09 ]

There is a scenario that can end up with rebuild process failing to
return good content, i.e.
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,

- the 1st retry is to rebuild with all other stripes, it'll eventually
  be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
  that it will do raid6 style rebuild,

however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content, and users will think of this as data loss.
More seriouly, if the loss happens on some important internal btree
roots, it could refuse to mount.

This extends btrfs to do more retries and each retry fails only one
stripe.  Since raid6 can tolerate 2 disk failures, if there is one
more failure besides the failure on which we're recovering, this can
always work.

The worst case is to retry as many times as the number of raid6 disks,
but given the fact that such a scenario is really rare in practice,
it's still acceptable.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/btrfs/raid56.c  | 18 ++++++++++++++----
 fs/btrfs/volumes.c |  9 ++++++++-
 2 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/raid56.c b/fs/btrfs/raid56.c
index d016d4a79864..af6a776fa18c 100644
--- a/fs/btrfs/raid56.c
+++ b/fs/btrfs/raid56.c
@@ -2161,11 +2161,21 @@ int raid56_parity_recover(struct btrfs_root *root, struct bio *bio,
 	}
 
 	/*
-	 * reconstruct from the q stripe if they are
-	 * asking for mirror 3
+	 * Loop retry:
+	 * for 'mirror == 2', reconstruct from all other stripes.
+	 * for 'mirror_num > 2', select a stripe to fail on every retry.
 	 */
-	if (mirror_num == 3)
-		rbio->failb = rbio->real_stripes - 2;
+	if (mirror_num > 2) {
+		/*
+		 * 'mirror == 3' is to fail the p stripe and
+		 * reconstruct from the q stripe.  'mirror > 3' is to
+		 * fail a data stripe and reconstruct from p+q stripe.
+		 */
+		rbio->failb = rbio->real_stripes - (mirror_num - 1);
+		ASSERT(rbio->failb > 0);
+		if (rbio->failb <= rbio->faila)
+			rbio->failb--;
+	}
 
 	ret = lock_stripe_add(rbio);
 
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index c2495cde26f6..25f450a0529d 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -5186,7 +5186,14 @@ int btrfs_num_copies(struct btrfs_fs_info *fs_info, u64 logical, u64 len)
 	else if (map->type & BTRFS_BLOCK_GROUP_RAID5)
 		ret = 2;
 	else if (map->type & BTRFS_BLOCK_GROUP_RAID6)
-		ret = 3;
+		/*
+		 * There could be two corrupted data stripes, we need
+		 * to loop retry in order to rebuild the correct data.
+		 * 
+		 * Fail a stripe at a time on every retry except the
+		 * stripe under reconstruction.
+		 */
+		ret = map->num_stripes;
 	else
 		ret = 1;
 	free_extent_map(em);
-- 
2.17.1