[PATCH AUTOSEL 5.1 01/70] iio: adc: ads124: avoid buffer overflow

[PATCH AUTOSEL 5.1 01/70] iio: adc: ads124: avoid buffer overflow

[Sasha Levin]

From: Vincent Stehlé <vincent.stehle@laposte.net>

[ Upstream commit 0db8aa49a97e7f40852a64fd35abcc1292a7c365 ]

When initializing the priv->data array starting from index 1, there is one
less element to consider than when initializing the full array.

Fixes: e717f8c6dfec8f76 ("iio: adc: Add the TI ads124s08 ADC code")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/ti-ads124s08.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c
index 53f17e4f2f23..552c2be8d87a 100644
--- a/drivers/iio/adc/ti-ads124s08.c
+++ b/drivers/iio/adc/ti-ads124s08.c
@@ -202,7 +202,7 @@ static int ads124s_read(struct iio_dev *indio_dev, unsigned int chan)
 	};
 
 	priv->data[0] = ADS124S08_CMD_RDATA;
-	memset(&priv->data[1], ADS124S08_CMD_NOP, sizeof(priv->data));
+	memset(&priv->data[1], ADS124S08_CMD_NOP, sizeof(priv->data) - 1);
 
 	ret = spi_sync_transfer(priv->spi, t, ARRAY_SIZE(t));
 	if (ret < 0)
-- 
2.20.1

[PATCH AUTOSEL 5.1 02/70] iio: imu: mpu6050: Fix FIFO layout for ICM20602

[Sasha Levin]

From: Steve Moskovchenko <stevemo@skydio.com>

[ Upstream commit 1615fe41a1959a2ee2814ba62736b2bb54e9802a ]

The MPU6050 driver has recently gained support for the
ICM20602 IMU, which is very similar to MPU6xxx. However,
the ICM20602's FIFO data specifically includes temperature
readings, which were not present on MPU6xxx parts. As a
result, the driver will under-read the ICM20602's FIFO
register, causing the same (partial) sample to be returned
for all reads, until the FIFO overflows.

Fix this by adding a table of scan elements specifically
for the ICM20602, which takes the extra temperature data
into consideration.

While we're at it, fix the temperature offset and scaling
on ICM20602, since it uses different scale/offset constants
than the rest of the MPU6xxx devices.

Signed-off-by: Steve Moskovchenko <stevemo@skydio.com>
Fixes: 22904bdff978 ("iio: imu: mpu6050: Add support for the ICM 20602 IMU")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 46 ++++++++++++++++++++--
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  | 20 +++++++++-
 drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c |  3 ++
 3 files changed, 64 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 650de0fefb7b..385f14a4d5a7 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -471,7 +471,10 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
 			return IIO_VAL_INT_PLUS_MICRO;
 		case IIO_TEMP:
 			*val = 0;
-			*val2 = INV_MPU6050_TEMP_SCALE;
+			if (st->chip_type == INV_ICM20602)
+				*val2 = INV_ICM20602_TEMP_SCALE;
+			else
+				*val2 = INV_MPU6050_TEMP_SCALE;
 
 			return IIO_VAL_INT_PLUS_MICRO;
 		default:
@@ -480,7 +483,10 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_OFFSET:
 		switch (chan->type) {
 		case IIO_TEMP:
-			*val = INV_MPU6050_TEMP_OFFSET;
+			if (st->chip_type == INV_ICM20602)
+				*val = INV_ICM20602_TEMP_OFFSET;
+			else
+				*val = INV_MPU6050_TEMP_OFFSET;
 
 			return IIO_VAL_INT;
 		default:
@@ -845,6 +851,32 @@ static const struct iio_chan_spec inv_mpu_channels[] = {
 	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
 };
 
+static const struct iio_chan_spec inv_icm20602_channels[] = {
+	IIO_CHAN_SOFT_TIMESTAMP(INV_ICM20602_SCAN_TIMESTAMP),
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
+				| BIT(IIO_CHAN_INFO_OFFSET)
+				| BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = INV_ICM20602_SCAN_TEMP,
+		.scan_type = {
+				.sign = 's',
+				.realbits = 16,
+				.storagebits = 16,
+				.shift = 0,
+				.endianness = IIO_BE,
+			     },
+	},
+
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_ICM20602_SCAN_GYRO_X),
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_ICM20602_SCAN_GYRO_Y),
+	INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_ICM20602_SCAN_GYRO_Z),
+
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_ICM20602_SCAN_ACCL_Y),
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_ICM20602_SCAN_ACCL_X),
+	INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_ICM20602_SCAN_ACCL_Z),
+};
+
 /*
  * The user can choose any frequency between INV_MPU6050_MIN_FIFO_RATE and
  * INV_MPU6050_MAX_FIFO_RATE, but only these frequencies are matched by the
@@ -1100,8 +1132,14 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 		indio_dev->name = name;
 	else
 		indio_dev->name = dev_name(dev);
-	indio_dev->channels = inv_mpu_channels;
-	indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
+
+	if (chip_type == INV_ICM20602) {
+		indio_dev->channels = inv_icm20602_channels;
+		indio_dev->num_channels = ARRAY_SIZE(inv_icm20602_channels);
+	} else {
+		indio_dev->channels = inv_mpu_channels;
+		indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
+	}
 
 	indio_dev->info = &mpu_info;
 	indio_dev->modes = INDIO_BUFFER_TRIGGERED;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index 325afd9f5f61..3d5fe4474378 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -208,6 +208,9 @@ struct inv_mpu6050_state {
 #define INV_MPU6050_BYTES_PER_3AXIS_SENSOR   6
 #define INV_MPU6050_FIFO_COUNT_BYTE          2
 
+/* ICM20602 FIFO samples include temperature readings */
+#define INV_ICM20602_BYTES_PER_TEMP_SENSOR   2
+
 /* mpu6500 registers */
 #define INV_MPU6500_REG_ACCEL_CONFIG_2      0x1D
 #define INV_MPU6500_REG_ACCEL_OFFSET        0x77
@@ -229,6 +232,9 @@ struct inv_mpu6050_state {
 #define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT    3
 #define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT    3
 
+#define INV_ICM20602_TEMP_OFFSET	     8170
+#define INV_ICM20602_TEMP_SCALE		     3060
+
 /* 6 + 6 round up and plus 8 */
 #define INV_MPU6050_OUTPUT_DATA_SIZE         24
 
@@ -270,7 +276,7 @@ struct inv_mpu6050_state {
 #define INV_ICM20608_WHOAMI_VALUE		0xAF
 #define INV_ICM20602_WHOAMI_VALUE		0x12
 
-/* scan element definition */
+/* scan element definition for generic MPU6xxx devices */
 enum inv_mpu6050_scan {
 	INV_MPU6050_SCAN_ACCL_X,
 	INV_MPU6050_SCAN_ACCL_Y,
@@ -281,6 +287,18 @@ enum inv_mpu6050_scan {
 	INV_MPU6050_SCAN_TIMESTAMP,
 };
 
+/* scan element definition for ICM20602, which includes temperature */
+enum inv_icm20602_scan {
+	INV_ICM20602_SCAN_ACCL_X,
+	INV_ICM20602_SCAN_ACCL_Y,
+	INV_ICM20602_SCAN_ACCL_Z,
+	INV_ICM20602_SCAN_TEMP,
+	INV_ICM20602_SCAN_GYRO_X,
+	INV_ICM20602_SCAN_GYRO_Y,
+	INV_ICM20602_SCAN_GYRO_Z,
+	INV_ICM20602_SCAN_TIMESTAMP,
+};
+
 enum inv_mpu6050_filter_e {
 	INV_MPU6050_FILTER_256HZ_NOLPF2 = 0,
 	INV_MPU6050_FILTER_188HZ,
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 548e042f7b5b..57bd11bde56b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -207,6 +207,9 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
 	if (st->chip_config.gyro_fifo_enable)
 		bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR;
 
+	if (st->chip_type == INV_ICM20602)
+		bytes_per_datum += INV_ICM20602_BYTES_PER_TEMP_SENSOR;
+
 	/*
 	 * read fifo_count register to know how many bytes are inside the FIFO
 	 * right now
-- 
2.20.1

[PATCH AUTOSEL 5.1 03/70] iio: dac: ds4422/ds4424 fix chip verification

[Sasha Levin]

From: Ruslan Babayev <ruslan@babayev.com>

[ Upstream commit 60f2208699ec08ff9fdf1f97639a661a92a18f1c ]

The ds4424_get_value function takes channel number as it's 3rd
argument and translates it internally into I2C address using
DS4424_DAC_ADDR macro. The caller ds4424_verify_chip was passing an
already translated I2C address as its last argument.

Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Cc: xe-linux-external@cisco.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/dac/ds4424.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/dac/ds4424.c b/drivers/iio/dac/ds4424.c
index 883a47562055..714a97f91319 100644
--- a/drivers/iio/dac/ds4424.c
+++ b/drivers/iio/dac/ds4424.c
@@ -166,7 +166,7 @@ static int ds4424_verify_chip(struct iio_dev *indio_dev)
 {
 	int ret, val;
 
-	ret = ds4424_get_value(indio_dev, &val, DS4424_DAC_ADDR(0));
+	ret = ds4424_get_value(indio_dev, &val, 0);
 	if (ret < 0)
 		dev_err(&indio_dev->dev,
 				"%s failed. ret: %d\n", __func__, ret);
-- 
2.20.1

[PATCH AUTOSEL 5.1 04/70] iio: adc: ti-ads8688: fix timestamp is not updated in buffer

[Sasha Levin]

From: Sean Nyekjaer <sean@geanix.com>

[ Upstream commit e6d12298310fa1dc11f1d747e05b168016057fdd ]

When using the hrtimer iio trigger timestamp isn't updated.
If we use iio_get_time_ns it is updated correctly.

Fixes: 2a86487786b5c ("iio: adc: ti-ads8688: add trigger and buffer support")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/ti-ads8688.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c
index 8b4568edd5cb..7f16c77b99fb 100644
--- a/drivers/iio/adc/ti-ads8688.c
+++ b/drivers/iio/adc/ti-ads8688.c
@@ -397,7 +397,7 @@ static irqreturn_t ads8688_trigger_handler(int irq, void *p)
 	}
 
 	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
-			pf->timestamp);
+			iio_get_time_ns(indio_dev));
 
 	iio_trigger_notify_done(indio_dev->trig);
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 05/70] staging: erofs: set sb->s_root to NULL when failing from __getname()

[Sasha Levin]

From: Chengguang Xu <cgxu519@gmail.com>

[ Upstream commit f2dcb8841e6b155da098edae09125859ef7e853d ]

Set sb->s_root to NULL when failing from __getname(),
so that we can avoid double dput and unnecessary operations
in generic_shutdown_super().

Signed-off-by: Chengguang Xu <cgxu519@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/erofs/super.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/staging/erofs/super.c b/drivers/staging/erofs/super.c
index 15c784fba879..c8981662a49b 100644
--- a/drivers/staging/erofs/super.c
+++ b/drivers/staging/erofs/super.c
@@ -459,6 +459,7 @@ static int erofs_read_super(struct super_block *sb,
 	 */
 err_devname:
 	dput(sb->s_root);
+	sb->s_root = NULL;
 err_iget:
 #ifdef EROFS_FS_HAS_MANAGED_CACHE
 	iput(sbi->managed_cache);
-- 
2.20.1

[PATCH AUTOSEL 5.1 06/70] Staging: vc04_services: Fix a couple error codes

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit ca4e4efbefbbdde0a7bb3023ea08d491f4daf9b9 ]

These are accidentally returning positive EINVAL instead of negative
-EINVAL.  Some of the callers treat positive values as success.

Fixes: 7b3ad5abf027 ("staging: Import the BCM2835 MMAL-based V4L2 camera driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/vc04_services/bcm2835-camera/controls.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/vc04_services/bcm2835-camera/controls.c b/drivers/staging/vc04_services/bcm2835-camera/controls.c
index a2c55cb2192a..52f3c4be5ff8 100644
--- a/drivers/staging/vc04_services/bcm2835-camera/controls.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/controls.c
@@ -576,7 +576,7 @@ exit:
 				dev->colourfx.enable ? "true" : "false",
 				dev->colourfx.u, dev->colourfx.v,
 				ret, (ret == 0 ? 0 : -EINVAL));
-	return (ret == 0 ? 0 : EINVAL);
+	return (ret == 0 ? 0 : -EINVAL);
 }
 
 static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
@@ -600,7 +600,7 @@ static int ctrl_set_colfx(struct bm2835_mmal_dev *dev,
 		 "%s: After: mmal_ctrl:%p ctrl id:0x%x ctrl val:%d ret %d(%d)\n",
 			__func__, mmal_ctrl, ctrl->id, ctrl->val, ret,
 			(ret == 0 ? 0 : -EINVAL));
-	return (ret == 0 ? 0 : EINVAL);
+	return (ret == 0 ? 0 : -EINVAL);
 }
 
 static int ctrl_set_bitrate(struct bm2835_mmal_dev *dev,
-- 
2.20.1

[PATCH AUTOSEL 5.1 07/70] staging: wilc1000: Fix some double unlock bugs in wilc_wlan_cleanup()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit fea69916360468e364a4988db25a5afa835f3406 ]

If ->hif_read_reg() or ->hif_write_reg() fail then the code unlocks
and keeps executing.  It should just return.

Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/wilc1000/wilc_wlan.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c
index c2389695fe20..70b1ab21f8a3 100644
--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -1076,13 +1076,17 @@ void wilc_wlan_cleanup(struct net_device *dev)
 	acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP);
 
 	ret = wilc->hif_func->hif_read_reg(wilc, WILC_GP_REG_0, &reg);
-	if (!ret)
+	if (!ret) {
 		release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+		return;
+	}
 
 	ret = wilc->hif_func->hif_write_reg(wilc, WILC_GP_REG_0,
 					(reg | ABORT_INT));
-	if (!ret)
+	if (!ret) {
 		release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
+		return;
+	}
 
 	release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 	wilc->hif_func->hif_deinit(NULL);
-- 
2.20.1

[PATCH AUTOSEL 5.1 08/70] pinctrl: intel: Clear interrupt status in mask/unmask callback

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 670784fb4ebe54434e263837390e358405031d9e ]

Commit a939bb57cd47 ("pinctrl: intel: implement gpio_irq_enable") was
added because clearing interrupt status bit is required to avoid
unexpected behavior.

Turns out the unmask callback also needs the fix, which can solve weird
IRQ triggering issues on I2C touchpad ELAN1200.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/intel/pinctrl-intel.c | 37 +++++----------------------
 1 file changed, 6 insertions(+), 31 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index 3b1818184207..717148d2818c 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -913,35 +913,6 @@ static void intel_gpio_irq_ack(struct irq_data *d)
 	}
 }
 
-static void intel_gpio_irq_enable(struct irq_data *d)
-{
-	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct intel_pinctrl *pctrl = gpiochip_get_data(gc);
-	const struct intel_community *community;
-	const struct intel_padgroup *padgrp;
-	int pin;
-
-	pin = intel_gpio_to_pin(pctrl, irqd_to_hwirq(d), &community, &padgrp);
-	if (pin >= 0) {
-		unsigned int gpp, gpp_offset, is_offset;
-		unsigned long flags;
-		u32 value;
-
-		gpp = padgrp->reg_num;
-		gpp_offset = padgroup_offset(padgrp, pin);
-		is_offset = community->is_offset + gpp * 4;
-
-		raw_spin_lock_irqsave(&pctrl->lock, flags);
-		/* Clear interrupt status first to avoid unexpected interrupt */
-		writel(BIT(gpp_offset), community->regs + is_offset);
-
-		value = readl(community->regs + community->ie_offset + gpp * 4);
-		value |= BIT(gpp_offset);
-		writel(value, community->regs + community->ie_offset + gpp * 4);
-		raw_spin_unlock_irqrestore(&pctrl->lock, flags);
-	}
-}
-
 static void intel_gpio_irq_mask_unmask(struct irq_data *d, bool mask)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
@@ -954,15 +925,20 @@ static void intel_gpio_irq_mask_unmask(struct irq_data *d, bool mask)
 	if (pin >= 0) {
 		unsigned int gpp, gpp_offset;
 		unsigned long flags;
-		void __iomem *reg;
+		void __iomem *reg, *is;
 		u32 value;
 
 		gpp = padgrp->reg_num;
 		gpp_offset = padgroup_offset(padgrp, pin);
 
 		reg = community->regs + community->ie_offset + gpp * 4;
+		is = community->regs + community->is_offset + gpp * 4;
 
 		raw_spin_lock_irqsave(&pctrl->lock, flags);
+
+		/* Clear interrupt status first to avoid unexpected interrupt */
+		writel(BIT(gpp_offset), is);
+
 		value = readl(reg);
 		if (mask)
 			value &= ~BIT(gpp_offset);
@@ -1106,7 +1082,6 @@ static irqreturn_t intel_gpio_irq(int irq, void *data)
 
 static struct irq_chip intel_gpio_irqchip = {
 	.name = "intel-gpio",
-	.irq_enable = intel_gpio_irq_enable,
 	.irq_ack = intel_gpio_irq_ack,
 	.irq_mask = intel_gpio_irq_mask,
 	.irq_unmask = intel_gpio_irq_unmask,
-- 
2.20.1

[PATCH AUTOSEL 5.1 09/70] netfilter: nf_tables: fix oops during rule dump

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 2c82c7e724ff51cab78e1afd5c2aaa31994fe41e ]

We can oops in nf_tables_fill_rule_info().

Its not possible to fetch previous element in rcu-protected lists
when deletions are not prevented somehow: list_del_rcu poisons
the ->prev pointer value.

Before rcu-conversion this was safe as dump operations did hold
nfnetlink mutex.

Pass previous rule as argument, obtained by keeping a pointer to
the previous rule during traversal.

Fixes: d9adf22a291883 ("netfilter: nf_tables: use call_rcu in netlink dumps")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 1606eaa5ae0d..041a81185c6a 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -2256,13 +2256,13 @@ static int nf_tables_fill_rule_info(struct sk_buff *skb, struct net *net,
 				    u32 flags, int family,
 				    const struct nft_table *table,
 				    const struct nft_chain *chain,
-				    const struct nft_rule *rule)
+				    const struct nft_rule *rule,
+				    const struct nft_rule *prule)
 {
 	struct nlmsghdr *nlh;
 	struct nfgenmsg *nfmsg;
 	const struct nft_expr *expr, *next;
 	struct nlattr *list;
-	const struct nft_rule *prule;
 	u16 type = nfnl_msg_type(NFNL_SUBSYS_NFTABLES, event);
 
 	nlh = nlmsg_put(skb, portid, seq, type, sizeof(struct nfgenmsg), flags);
@@ -2282,8 +2282,7 @@ static int nf_tables_fill_rule_info(struct sk_buff *skb, struct net *net,
 			 NFTA_RULE_PAD))
 		goto nla_put_failure;
 
-	if ((event != NFT_MSG_DELRULE) && (rule->list.prev != &chain->rules)) {
-		prule = list_prev_entry(rule, list);
+	if (event != NFT_MSG_DELRULE && prule) {
 		if (nla_put_be64(skb, NFTA_RULE_POSITION,
 				 cpu_to_be64(prule->handle),
 				 NFTA_RULE_PAD))
@@ -2330,7 +2329,7 @@ static void nf_tables_rule_notify(const struct nft_ctx *ctx,
 
 	err = nf_tables_fill_rule_info(skb, ctx->net, ctx->portid, ctx->seq,
 				       event, 0, ctx->family, ctx->table,
-				       ctx->chain, rule);
+				       ctx->chain, rule, NULL);
 	if (err < 0) {
 		kfree_skb(skb);
 		goto err;
@@ -2355,12 +2354,13 @@ static int __nf_tables_dump_rules(struct sk_buff *skb,
 				  const struct nft_chain *chain)
 {
 	struct net *net = sock_net(skb->sk);
+	const struct nft_rule *rule, *prule;
 	unsigned int s_idx = cb->args[0];
-	const struct nft_rule *rule;
 
+	prule = NULL;
 	list_for_each_entry_rcu(rule, &chain->rules, list) {
 		if (!nft_is_active(net, rule))
-			goto cont;
+			goto cont_skip;
 		if (*idx < s_idx)
 			goto cont;
 		if (*idx > s_idx) {
@@ -2372,11 +2372,13 @@ static int __nf_tables_dump_rules(struct sk_buff *skb,
 					NFT_MSG_NEWRULE,
 					NLM_F_MULTI | NLM_F_APPEND,
 					table->family,
-					table, chain, rule) < 0)
+					table, chain, rule, prule) < 0)
 			return 1;
 
 		nl_dump_check_consistent(cb, nlmsg_hdr(skb));
 cont:
+		prule = rule;
+cont_skip:
 		(*idx)++;
 	}
 	return 0;
@@ -2532,7 +2534,7 @@ static int nf_tables_getrule(struct net *net, struct sock *nlsk,
 
 	err = nf_tables_fill_rule_info(skb2, net, NETLINK_CB(skb).portid,
 				       nlh->nlmsg_seq, NFT_MSG_NEWRULE, 0,
-				       family, table, chain, rule);
+				       family, table, chain, rule, NULL);
 	if (err < 0)
 		goto err;
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 10/70] perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints

[Sasha Levin]

From: Stephane Eranian <eranian@google.com>

[ Upstream commit 23e3983a466cd540ffdd2bbc6e0c51e31934f941 ]

This patch fixes an bug revealed by the following commit:

  6b89d4c1ae85 ("perf/x86/intel: Fix INTEL_FLAGS_EVENT_CONSTRAINT* masking")

That patch modified INTEL_FLAGS_EVENT_CONSTRAINT() to only look at the event code
when matching a constraint. If code+umask were needed, then the
INTEL_FLAGS_UEVENT_CONSTRAINT() macro was needed instead.
This broke with some of the constraints for PEBS events.

Several of them, including the one used for cycles:p, cycles:pp, cycles:ppp
fell in that category and caused the event to be rejected in PEBS mode.
In other words, on some platforms a cmdline such as:

  $ perf top -e cycles:pp

would fail with -EINVAL.

This patch fixes this bug by properly using INTEL_FLAGS_UEVENT_CONSTRAINT()
when needed in the PEBS constraint tables.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/20190521005246.423-1-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/ds.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index 10c99ce1fead..b71adf603b86 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -684,7 +684,7 @@ struct event_constraint intel_core2_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x1fc7, 0x1), /* SIMD_INST_RETURED.ANY */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1),    /* MEM_LOAD_RETIRED.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x01),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x01),
 	EVENT_CONSTRAINT_END
 };
 
@@ -693,7 +693,7 @@ struct event_constraint intel_atom_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c5, 0x1), /* MISPREDICTED_BRANCH_RETIRED */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1),    /* MEM_LOAD_RETIRED.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x01),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x01),
 	/* Allow all events as PEBS with no flags */
 	INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
 	EVENT_CONSTRAINT_END
@@ -701,7 +701,7 @@ struct event_constraint intel_atom_pebs_event_constraints[] = {
 
 struct event_constraint intel_slm_pebs_event_constraints[] = {
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x1),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x1),
 	/* Allow all events as PEBS with no flags */
 	INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
 	EVENT_CONSTRAINT_END
@@ -726,7 +726,7 @@ struct event_constraint intel_nehalem_pebs_event_constraints[] = {
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf),    /* MEM_LOAD_RETIRED.* */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf),    /* FP_ASSIST.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	EVENT_CONSTRAINT_END
 };
 
@@ -743,7 +743,7 @@ struct event_constraint intel_westmere_pebs_event_constraints[] = {
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf),    /* MEM_LOAD_RETIRED.* */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf),    /* FP_ASSIST.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	EVENT_CONSTRAINT_END
 };
 
@@ -752,7 +752,7 @@ struct event_constraint intel_snb_pebs_event_constraints[] = {
 	INTEL_PLD_CONSTRAINT(0x01cd, 0x8),    /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
 	INTEL_PST_CONSTRAINT(0x02cd, 0x8),    /* MEM_TRANS_RETIRED.PRECISE_STORES */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
         INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
         INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
         INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -767,9 +767,9 @@ struct event_constraint intel_ivb_pebs_event_constraints[] = {
         INTEL_PLD_CONSTRAINT(0x01cd, 0x8),    /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
 	INTEL_PST_CONSTRAINT(0x02cd, 0x8),    /* MEM_TRANS_RETIRED.PRECISE_STORES */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -783,9 +783,9 @@ struct event_constraint intel_hsw_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
 	INTEL_PLD_CONSTRAINT(0x01cd, 0xf),    /* MEM_TRANS_RETIRED.* */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x11d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x21d0, 0xf), /* MEM_UOPS_RETIRED.LOCK_LOADS */
@@ -806,9 +806,9 @@ struct event_constraint intel_bdw_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
 	INTEL_PLD_CONSTRAINT(0x01cd, 0xf),    /* MEM_TRANS_RETIRED.* */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c2, 0xf),
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x11d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x21d0, 0xf), /* MEM_UOPS_RETIRED.LOCK_LOADS */
@@ -829,9 +829,9 @@ struct event_constraint intel_bdw_pebs_event_constraints[] = {
 struct event_constraint intel_skl_pebs_event_constraints[] = {
 	INTEL_FLAGS_UEVENT_CONSTRAINT(0x1c0, 0x2),	/* INST_RETIRED.PREC_DIST */
 	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108001c0, 0x2),
 	/* INST_RETIRED.TOTAL_CYCLES_PS (inv=1, cmask=16) (cycles:p). */
-	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x108000c0, 0x0f),
 	INTEL_PLD_CONSTRAINT(0x1cd, 0xf),		      /* MEM_TRANS_RETIRED.* */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x11d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x12d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_STORES */
-- 
2.20.1

[PATCH AUTOSEL 5.1 11/70] netfilter: nf_queue: fix reinject verdict handling

[Sasha Levin]

From: Jagdish Motwani <jagdish.motwani@sophos.com>

[ Upstream commit 946c0d8e6ed43dae6527e878d0077c1e11015db0 ]

This patch fixes netfilter hook traversal when there are more than 1 hooks
returning NF_QUEUE verdict. When the first queue reinjects the packet,
'nf_reinject' starts traversing hooks with a proper hook_index. However,
if it again receives a NF_QUEUE verdict (by some other netfilter hook), it
queues the packet with a wrong hook_index. So, when the second queue
reinjects the packet, it re-executes hooks in between.

Fixes: 960632ece694 ("netfilter: convert hook list to an array")
Signed-off-by: Jagdish Motwani <jagdish.motwani@sophos.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_queue.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index a36a77bae1d6..5b86574e7b89 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -254,6 +254,7 @@ static unsigned int nf_iterate(struct sk_buff *skb,
 repeat:
 		verdict = nf_hook_entry_hookfn(hook, skb, state);
 		if (verdict != NF_ACCEPT) {
+			*index = i;
 			if (verdict != NF_REPEAT)
 				return verdict;
 			goto repeat;
-- 
2.20.1

[PATCH AUTOSEL 5.1 12/70] netfilter: nft_fib: Fix existence check support

[Sasha Levin]

From: Phil Sutter <phil@nwl.cc>

[ Upstream commit e633508a95289489d28faacb68b32c3e7e68ef6f ]

NFTA_FIB_F_PRESENT flag was not always honored since eval functions did
not call nft_fib_store_result in all cases.

Given that in all callsites there is a struct net_device pointer
available which holds the interface data to be stored in destination
register, simplify nft_fib_store_result() to just accept that pointer
instead of the nft_pktinfo pointer and interface index. This also
allows to drop the index to interface lookup previously needed to get
the name associated with given index.

Fixes: 055c4b34b94f6 ("netfilter: nft_fib: Support existence check")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netfilter/nft_fib.h   |  2 +-
 net/ipv4/netfilter/nft_fib_ipv4.c | 23 +++--------------------
 net/ipv6/netfilter/nft_fib_ipv6.c | 16 ++--------------
 net/netfilter/nft_fib.c           |  6 +++---
 4 files changed, 9 insertions(+), 38 deletions(-)

diff --git a/include/net/netfilter/nft_fib.h b/include/net/netfilter/nft_fib.h
index a88f92737308..e4c4d8eaca8c 100644
--- a/include/net/netfilter/nft_fib.h
+++ b/include/net/netfilter/nft_fib.h
@@ -34,5 +34,5 @@ void nft_fib6_eval(const struct nft_expr *expr, struct nft_regs *regs,
 		   const struct nft_pktinfo *pkt);
 
 void nft_fib_store_result(void *reg, const struct nft_fib *priv,
-			  const struct nft_pktinfo *pkt, int index);
+			  const struct net_device *dev);
 #endif
diff --git a/net/ipv4/netfilter/nft_fib_ipv4.c b/net/ipv4/netfilter/nft_fib_ipv4.c
index 94eb25bc8d7e..c8888e52591f 100644
--- a/net/ipv4/netfilter/nft_fib_ipv4.c
+++ b/net/ipv4/netfilter/nft_fib_ipv4.c
@@ -58,11 +58,6 @@ void nft_fib4_eval_type(const struct nft_expr *expr, struct nft_regs *regs,
 }
 EXPORT_SYMBOL_GPL(nft_fib4_eval_type);
 
-static int get_ifindex(const struct net_device *dev)
-{
-	return dev ? dev->ifindex : 0;
-}
-
 void nft_fib4_eval(const struct nft_expr *expr, struct nft_regs *regs,
 		   const struct nft_pktinfo *pkt)
 {
@@ -94,8 +89,7 @@ void nft_fib4_eval(const struct nft_expr *expr, struct nft_regs *regs,
 
 	if (nft_hook(pkt) == NF_INET_PRE_ROUTING &&
 	    nft_fib_is_loopback(pkt->skb, nft_in(pkt))) {
-		nft_fib_store_result(dest, priv, pkt,
-				     nft_in(pkt)->ifindex);
+		nft_fib_store_result(dest, priv, nft_in(pkt));
 		return;
 	}
 
@@ -108,8 +102,7 @@ void nft_fib4_eval(const struct nft_expr *expr, struct nft_regs *regs,
 	if (ipv4_is_zeronet(iph->saddr)) {
 		if (ipv4_is_lbcast(iph->daddr) ||
 		    ipv4_is_local_multicast(iph->daddr)) {
-			nft_fib_store_result(dest, priv, pkt,
-					     get_ifindex(pkt->skb->dev));
+			nft_fib_store_result(dest, priv, pkt->skb->dev);
 			return;
 		}
 	}
@@ -150,17 +143,7 @@ void nft_fib4_eval(const struct nft_expr *expr, struct nft_regs *regs,
 		found = oif;
 	}
 
-	switch (priv->result) {
-	case NFT_FIB_RESULT_OIF:
-		*dest = found->ifindex;
-		break;
-	case NFT_FIB_RESULT_OIFNAME:
-		strncpy((char *)dest, found->name, IFNAMSIZ);
-		break;
-	default:
-		WARN_ON_ONCE(1);
-		break;
-	}
+	nft_fib_store_result(dest, priv, found);
 }
 EXPORT_SYMBOL_GPL(nft_fib4_eval);
 
diff --git a/net/ipv6/netfilter/nft_fib_ipv6.c b/net/ipv6/netfilter/nft_fib_ipv6.c
index 73cdc0bc63f7..ec068b0cffca 100644
--- a/net/ipv6/netfilter/nft_fib_ipv6.c
+++ b/net/ipv6/netfilter/nft_fib_ipv6.c
@@ -169,8 +169,7 @@ void nft_fib6_eval(const struct nft_expr *expr, struct nft_regs *regs,
 
 	if (nft_hook(pkt) == NF_INET_PRE_ROUTING &&
 	    nft_fib_is_loopback(pkt->skb, nft_in(pkt))) {
-		nft_fib_store_result(dest, priv, pkt,
-				     nft_in(pkt)->ifindex);
+		nft_fib_store_result(dest, priv, nft_in(pkt));
 		return;
 	}
 
@@ -187,18 +186,7 @@ void nft_fib6_eval(const struct nft_expr *expr, struct nft_regs *regs,
 	if (oif && oif != rt->rt6i_idev->dev)
 		goto put_rt_err;
 
-	switch (priv->result) {
-	case NFT_FIB_RESULT_OIF:
-		*dest = rt->rt6i_idev->dev->ifindex;
-		break;
-	case NFT_FIB_RESULT_OIFNAME:
-		strncpy((char *)dest, rt->rt6i_idev->dev->name, IFNAMSIZ);
-		break;
-	default:
-		WARN_ON_ONCE(1);
-		break;
-	}
-
+	nft_fib_store_result(dest, priv, rt->rt6i_idev->dev);
  put_rt_err:
 	ip6_rt_put(rt);
 }
diff --git a/net/netfilter/nft_fib.c b/net/netfilter/nft_fib.c
index 21df8cccea65..77f00a99dfab 100644
--- a/net/netfilter/nft_fib.c
+++ b/net/netfilter/nft_fib.c
@@ -135,17 +135,17 @@ int nft_fib_dump(struct sk_buff *skb, const struct nft_expr *expr)
 EXPORT_SYMBOL_GPL(nft_fib_dump);
 
 void nft_fib_store_result(void *reg, const struct nft_fib *priv,
-			  const struct nft_pktinfo *pkt, int index)
+			  const struct net_device *dev)
 {
-	struct net_device *dev;
 	u32 *dreg = reg;
+	int index;
 
 	switch (priv->result) {
 	case NFT_FIB_RESULT_OIF:
+		index = dev ? dev->ifindex : 0;
 		*dreg = (priv->flags & NFTA_FIB_F_PRESENT) ? !!index : index;
 		break;
 	case NFT_FIB_RESULT_OIFNAME:
-		dev = dev_get_by_index_rcu(nft_net(pkt), index);
 		if (priv->flags & NFTA_FIB_F_PRESENT)
 			*dreg = !!dev;
 		else
-- 
2.20.1

[PATCH AUTOSEL 5.1 13/70] ipvs: Fix use-after-free in ip_vs_in

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 719c7d563c17b150877cee03a4b812a424989dfa ]

BUG: KASAN: use-after-free in ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
Read of size 4 at addr ffff8881e9b26e2c by task sshd/5603

CPU: 0 PID: 5603 Comm: sshd Not tainted 4.19.39+ #30
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
 dump_stack+0x71/0xab
 print_address_description+0x6a/0x270
 kasan_report+0x179/0x2c0
 ip_vs_in.part.29+0xe8/0xd20 [ip_vs]
 ip_vs_in+0xd8/0x170 [ip_vs]
 nf_hook_slow+0x5f/0xe0
 __ip_local_out+0x1d5/0x250
 ip_local_out+0x19/0x60
 __tcp_transmit_skb+0xba1/0x14f0
 tcp_write_xmit+0x41f/0x1ed0
 ? _copy_from_iter_full+0xca/0x340
 __tcp_push_pending_frames+0x52/0x140
 tcp_sendmsg_locked+0x787/0x1600
 ? tcp_sendpage+0x60/0x60
 ? inet_sk_set_state+0xb0/0xb0
 tcp_sendmsg+0x27/0x40
 sock_sendmsg+0x6d/0x80
 sock_write_iter+0x121/0x1c0
 ? sock_sendmsg+0x80/0x80
 __vfs_write+0x23e/0x370
 vfs_write+0xe7/0x230
 ksys_write+0xa1/0x120
 ? __ia32_sys_read+0x50/0x50
 ? __audit_syscall_exit+0x3ce/0x450
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7ff6f6147c60
Code: 73 01 c3 48 8b 0d 28 12 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 5d 73 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83
RSP: 002b:00007ffd772ead18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000034 RCX: 00007ff6f6147c60
RDX: 0000000000000034 RSI: 000055df30a31270 RDI: 0000000000000003
RBP: 000055df30a31270 R08: 0000000000000000 R09: 0000000000000000
R10: 00007ffd772ead70 R11: 0000000000000246 R12: 00007ffd772ead74
R13: 00007ffd772eae20 R14: 00007ffd772eae24 R15: 000055df2f12ddc0

Allocated by task 6052:
 kasan_kmalloc+0xa0/0xd0
 __kmalloc+0x10a/0x220
 ops_init+0x97/0x190
 register_pernet_operations+0x1ac/0x360
 register_pernet_subsys+0x24/0x40
 0xffffffffc0ea016d
 do_one_initcall+0x8b/0x253
 do_init_module+0xe3/0x335
 load_module+0x2fc0/0x3890
 __do_sys_finit_module+0x192/0x1c0
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 6067:
 __kasan_slab_free+0x130/0x180
 kfree+0x90/0x1a0
 ops_free_list.part.7+0xa6/0xc0
 unregister_pernet_operations+0x18b/0x1f0
 unregister_pernet_subsys+0x1d/0x30
 ip_vs_cleanup+0x1d/0xd2f [ip_vs]
 __x64_sys_delete_module+0x20c/0x300
 do_syscall_64+0x73/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff8881e9b26600 which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 2092 bytes inside of 4096-byte region [ffff8881e9b26600, ffff8881e9b27600)
The buggy address belongs to the page:
page:ffffea0007a6c800 count:1 mapcount:0 mapping:ffff888107c0e600 index:0x0 compound_mapcount: 0
flags: 0x17ffffc0008100(slab|head)
raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff888107c0e600
raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

while unregistering ipvs module, ops_free_list calls
__ip_vs_cleanup, then nf_unregister_net_hooks be called to
do remove nf hook entries. It need a RCU period to finish,
however net->ipvs is set to NULL immediately, which will
trigger NULL pointer dereference when a packet is hooked
and handled by ip_vs_in where net->ipvs is dereferenced.

Another scene is ops_free_list call ops_free to free the
net_generic directly while __ip_vs_cleanup finished, then
calling ip_vs_in will triggers use-after-free.

This patch moves nf_unregister_net_hooks from __ip_vs_cleanup()
to __ip_vs_dev_cleanup(),  where rcu_barrier() is called by
unregister_pernet_device -> unregister_pernet_operations,
that will do the needed grace period.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: efe41606184e ("ipvs: convert to use pernet nf_hook api")
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 14457551bcb4..8ebf21149ec3 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -2312,7 +2312,6 @@ static void __net_exit __ip_vs_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 
-	nf_unregister_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
 	ip_vs_service_net_cleanup(ipvs);	/* ip_vs_flush() with locks */
 	ip_vs_conn_net_cleanup(ipvs);
 	ip_vs_app_net_cleanup(ipvs);
@@ -2327,6 +2326,7 @@ static void __net_exit __ip_vs_dev_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
 	EnterFunction(2);
+	nf_unregister_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
 	ipvs->enable = 0;	/* Disable packet reception */
 	smp_wmb();
 	ip_vs_sync_net_cleanup(ipvs);
-- 
2.20.1

[PATCH AUTOSEL 5.1 14/70] selftests: netfilter: missing error check when setting up veth interface

[Sasha Levin]

From: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>

[ Upstream commit 82ce6eb1dd13fd12e449b2ee2c2ec051e6f52c43 ]

A test for the basic NAT functionality uses ip command which needs veth
device. There is a condition where the kernel support for veth is not
compiled into the kernel and the test script breaks. This patch contains
code for reasonable error display and correct code exit.

Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/netfilter/nft_nat.sh | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index 3194007cf8d1..a59c5fd4e987 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -23,7 +23,11 @@ ip netns add ns0
 ip netns add ns1
 ip netns add ns2
 
-ip link add veth0 netns ns0 type veth peer name eth0 netns ns1
+ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 > /dev/null 2>&1
+if [ $? -ne 0 ];then
+    echo "SKIP: No virtual ethernet pair device support in kernel"
+    exit $ksft_skip
+fi
 ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
 
 ip -net ns0 link set lo up
-- 
2.20.1

[PATCH AUTOSEL 5.1 15/70] netfilter: nat: fix udp checksum corruption

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 6bac76db1da3cb162c425d58ae421486f8e43955 ]

Due to copy&paste error nf_nat_mangle_udp_packet passes IPPROTO_TCP,
resulting in incorrect udp checksum when payload had to be mangled.

Fixes: dac3fe72596f9 ("netfilter: nat: remove csum_recalc hook")
Reported-by: Marc Haber <mh+netdev@zugschlus.de>
Tested-by: Marc Haber <mh+netdev@zugschlus.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_nat_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_nat_helper.c b/net/netfilter/nf_nat_helper.c
index ccc06f7539d7..53aeb12b70fb 100644
--- a/net/netfilter/nf_nat_helper.c
+++ b/net/netfilter/nf_nat_helper.c
@@ -170,7 +170,7 @@ nf_nat_mangle_udp_packet(struct sk_buff *skb,
 	if (!udph->check && skb->ip_summed != CHECKSUM_PARTIAL)
 		return true;
 
-	nf_nat_csum_recalc(skb, nf_ct_l3num(ct), IPPROTO_TCP,
+	nf_nat_csum_recalc(skb, nf_ct_l3num(ct), IPPROTO_UDP,
 			   udph, &udph->check, datalen, oldlen);
 
 	return true;
-- 
2.20.1

[PATCH AUTOSEL 5.1 16/70] clk: ti: clkctrl: Fix clkdm_clk handling

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 1cc54078d104f5b4d7e9f8d55362efa5a8daffdb ]

We need to always call clkdm_clk_enable() and clkdm_clk_disable() even
the clkctrl clock(s) enabled for the domain do not have any gate register
bits. Otherwise clockdomains may never get enabled except when devices get
probed with the legacy "ti,hwmods" devicetree property.

Fixes: 88a172526c32 ("clk: ti: add support for clkctrl clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ti/clkctrl.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 639f515e08f0..3325ee43bcc1 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -137,9 +137,6 @@ static int _omap4_clkctrl_clk_enable(struct clk_hw *hw)
 	int ret;
 	union omap4_timeout timeout = { 0 };
 
-	if (!clk->enable_bit)
-		return 0;
-
 	if (clk->clkdm) {
 		ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
 		if (ret) {
@@ -151,6 +148,9 @@ static int _omap4_clkctrl_clk_enable(struct clk_hw *hw)
 		}
 	}
 
+	if (!clk->enable_bit)
+		return 0;
+
 	val = ti_clk_ll_ops->clk_readl(&clk->enable_reg);
 
 	val &= ~OMAP4_MODULEMODE_MASK;
@@ -179,7 +179,7 @@ static void _omap4_clkctrl_clk_disable(struct clk_hw *hw)
 	union omap4_timeout timeout = { 0 };
 
 	if (!clk->enable_bit)
-		return;
+		goto exit;
 
 	val = ti_clk_ll_ops->clk_readl(&clk->enable_reg);
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 17/70] powerpc/powernv: Return for invalid IMC domain

[Sasha Levin]

From: Anju T Sudhakar <anju@linux.vnet.ibm.com>

[ Upstream commit b59bd3527fe3c1939340df558d7f9d568fc9f882 ]

Currently init_imc_pmu() can fail either because we try to register an
IMC unit with an invalid domain (i.e an IMC node not supported by the
kernel) or something went wrong while registering a valid IMC unit. In
both the cases kernel provides a 'Register failed' error message.

For example when trace-imc node is not supported by the kernel, but
skiboot advertises a trace-imc node we print:

  IMC Unknown Device type
  IMC PMU (null) Register failed

To avoid confusion just print the unknown device type message, before
attempting PMU registration, so the second message isn't printed.

Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device")
Reported-by: Pavaman Subramaniyam <pavsubra@in.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Reword change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/opal-imc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c
index 3d27f02695e4..828f6656f8f7 100644
--- a/arch/powerpc/platforms/powernv/opal-imc.c
+++ b/arch/powerpc/platforms/powernv/opal-imc.c
@@ -161,6 +161,10 @@ static int imc_pmu_create(struct device_node *parent, int pmu_index, int domain)
 	struct imc_pmu *pmu_ptr;
 	u32 offset;
 
+	/* Return for unknown domain */
+	if (domain < 0)
+		return -EINVAL;
+
 	/* memory for pmu */
 	pmu_ptr = kzalloc(sizeof(*pmu_ptr), GFP_KERNEL);
 	if (!pmu_ptr)
-- 
2.20.1

[PATCH AUTOSEL 5.1 18/70] usb: xhci: Fix a potential null pointer dereference in xhci_debugfs_create_endpoint()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 5bce256f0b528624a34fe907db385133bb7be33e ]

In xhci_debugfs_create_slot(), kzalloc() can fail and
dev->debugfs_private will be NULL.
In xhci_debugfs_create_endpoint(), dev->debugfs_private is used without
any null-pointer check, and can cause a null pointer dereference.

To fix this bug, a null-pointer check is added in
xhci_debugfs_create_endpoint().

This bug is found by a runtime fuzzing tool named FIZZER written by us.

[subjet line change change, add potential -Mathais]
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-debugfs.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c
index cadc01336bf8..7ba6afc7ef23 100644
--- a/drivers/usb/host/xhci-debugfs.c
+++ b/drivers/usb/host/xhci-debugfs.c
@@ -440,6 +440,9 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,
 	struct xhci_ep_priv	*epriv;
 	struct xhci_slot_priv	*spriv = dev->debugfs_private;
 
+	if (!spriv)
+		return;
+
 	if (spriv->eps[ep_index])
 		return;
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 19/70] mISDN: make sure device name is NUL terminated

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit ccfb62f27beb295103e9392462b20a6ed807d0ea ]

The user can change the device_name with the IMSETDEVNAME ioctl, but we
need to ensure that the user's name is NUL terminated.  Otherwise it
could result in a buffer overflow when we copy the name back to the user
with IMGETDEVINFO ioctl.

I also changed two strcpy() calls which handle the name to strscpy().
Hopefully, there aren't any other ways to create a too long name, but
it's nice to do this as a kernel hardening measure.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/socket.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index a14e35d40538..84e1d4c2db66 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -393,7 +393,7 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -676,7 +676,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			memcpy(di.channelmap, dev->channelmap,
 			       sizeof(di.channelmap));
 			di.nrbchan = dev->nrbchan;
-			strcpy(di.name, dev_name(&dev->dev));
+			strscpy(di.name, dev_name(&dev->dev), sizeof(di.name));
 			if (copy_to_user((void __user *)arg, &di, sizeof(di)))
 				err = -EFAULT;
 		} else
@@ -690,6 +690,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			err = -EFAULT;
 			break;
 		}
+		dn.name[sizeof(dn.name) - 1] = '\0';
 		dev = get_mdevice(dn.id);
 		if (dev)
 			err = device_rename(&dev->dev, dn.name);
-- 
2.20.1

[PATCH AUTOSEL 5.1 20/70] x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor

[Sasha Levin]

From: Frank van der Linden <fllinden@amazon.com>

[ Upstream commit 2ac44ab608705948564791ce1d15d43ba81a1e38 ]

For F17h AMD CPUs, the CPB capability ('Core Performance Boost') is forcibly set,
because some versions of that chip incorrectly report that they do not have it.

However, a hypervisor may filter out the CPB capability, for good
reasons. For example, KVM currently does not emulate setting the CPB
bit in MSR_K7_HWCR, and unchecked MSR access errors will be thrown
when trying to set it as a guest:

	unchecked MSR access error: WRMSR to 0xc0010015 (tried to write 0x0000000001000011) at rIP: 0xffffffff890638f4 (native_write_msr+0x4/0x20)

	Call Trace:
	boost_set_msr+0x50/0x80 [acpi_cpufreq]
	cpuhp_invoke_callback+0x86/0x560
	sort_range+0x20/0x20
	cpuhp_thread_fun+0xb0/0x110
	smpboot_thread_fn+0xef/0x160
	kthread+0x113/0x130
	kthread_create_worker_on_cpu+0x70/0x70
	ret_from_fork+0x35/0x40

To avoid this issue, don't forcibly set the CPB capability for a CPU
when running under a hypervisor.

Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: jiaxun.yang@flygoat.com
Fixes: 0237199186e7 ("x86/CPU/AMD: Set the CPB bit unconditionally on F17h")
Link: http://lkml.kernel.org/r/20190522221745.GA15789@dev-dsk-fllinden-2c-c1893d73.us-west-2.amazon.com
[ Minor edits to the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/amd.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 01004bfb1a1b..524709dcf749 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -820,8 +820,11 @@ static void init_amd_zn(struct cpuinfo_x86 *c)
 {
 	set_cpu_cap(c, X86_FEATURE_ZEN);
 
-	/* Fix erratum 1076: CPB feature bit not being set in CPUID. */
-	if (!cpu_has(c, X86_FEATURE_CPB))
+	/*
+	 * Fix erratum 1076: CPB feature bit not being set in CPUID.
+	 * Always set it, except when running under a hypervisor.
+	 */
+	if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_CPB))
 		set_cpu_cap(c, X86_FEATURE_CPB);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 21/70] perf/ring_buffer: Fix exposing a temporarily decreased data_head

[Sasha Levin]

From: Yabin Cui <yabinc@google.com>

[ Upstream commit 1b038c6e05ff70a1e66e3e571c2e6106bdb75f53 ]

In perf_output_put_handle(), an IRQ/NMI can happen in below location and
write records to the same ring buffer:

	...
	local_dec_and_test(&rb->nest)
	...                          <-- an IRQ/NMI can happen here
	rb->user_page->data_head = head;
	...

In this case, a value A is written to data_head in the IRQ, then a value
B is written to data_head after the IRQ. And A > B. As a result,
data_head is temporarily decreased from A to B. And a reader may see
data_head < data_tail if it read the buffer frequently enough, which
creates unexpected behaviors.

This can be fixed by moving dec(&rb->nest) to after updating data_head,
which prevents the IRQ/NMI above from updating data_head.

[ Split up by peterz. ]

Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: mark.rutland@arm.com
Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.224478157@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/ring_buffer.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index 674b35383491..009467a60578 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -51,11 +51,18 @@ again:
 	head = local_read(&rb->head);
 
 	/*
-	 * IRQ/NMI can happen here, which means we can miss a head update.
+	 * IRQ/NMI can happen here and advance @rb->head, causing our
+	 * load above to be stale.
 	 */
 
-	if (!local_dec_and_test(&rb->nest))
+	/*
+	 * If this isn't the outermost nesting, we don't have to update
+	 * @rb->user_page->data_head.
+	 */
+	if (local_read(&rb->nest) > 1) {
+		local_dec(&rb->nest);
 		goto out;
+	}
 
 	/*
 	 * Since the mmap() consumer (userspace) can run on a different CPU:
@@ -87,9 +94,18 @@ again:
 	rb->user_page->data_head = head;
 
 	/*
-	 * Now check if we missed an update -- rely on previous implied
-	 * compiler barriers to force a re-read.
+	 * We must publish the head before decrementing the nest count,
+	 * otherwise an IRQ/NMI can publish a more recent head value and our
+	 * write will (temporarily) publish a stale value.
+	 */
+	barrier();
+	local_set(&rb->nest, 0);
+
+	/*
+	 * Ensure we decrement @rb->nest before we validate the @rb->head.
+	 * Otherwise we cannot be sure we caught the 'last' nested update.
 	 */
+	barrier();
 	if (unlikely(head != local_read(&rb->head))) {
 		local_inc(&rb->nest);
 		goto again;
-- 
2.20.1

[PATCH AUTOSEL 5.1 22/70] perf/ring_buffer: Add ordering to rb->nest increment

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 3f9fbe9bd86c534eba2faf5d840fd44c6049f50e ]

Similar to how decrementing rb->next too early can cause data_head to
(temporarily) be observed to go backward, so too can this happen when
we increment too late.

This barrier() ensures the rb->head load happens after the increment,
both the one in the 'goto again' path, as the one from
perf_output_get_handle() -- albeit very unlikely to matter for the
latter.

Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: ef60777c9abd ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.309516009@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/ring_buffer.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index 009467a60578..4b5f8d932400 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -48,6 +48,15 @@ static void perf_output_put_handle(struct perf_output_handle *handle)
 	unsigned long head;
 
 again:
+	/*
+	 * In order to avoid publishing a head value that goes backwards,
+	 * we must ensure the load of @rb->head happens after we've
+	 * incremented @rb->nest.
+	 *
+	 * Otherwise we can observe a @rb->head value before one published
+	 * by an IRQ/NMI happening between the load and the increment.
+	 */
+	barrier();
 	head = local_read(&rb->head);
 
 	/*
-- 
2.20.1

[PATCH AUTOSEL 5.1 23/70] perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 4d839dd9e4356bbacf3eb0ab13a549b83b008c21 ]

We must use {READ,WRITE}_ONCE() on rb->user_page data such that
concurrent usage will see whole values. A few key sites were missing
this.

Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: 7b732a750477 ("perf_counter: new output ABI - part 1")
Link: http://lkml.kernel.org/r/20190517115418.394192145@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/ring_buffer.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c
index 4b5f8d932400..7a0c73e4b3eb 100644
--- a/kernel/events/ring_buffer.c
+++ b/kernel/events/ring_buffer.c
@@ -100,7 +100,7 @@ again:
 	 * See perf_output_begin().
 	 */
 	smp_wmb(); /* B, matches C */
-	rb->user_page->data_head = head;
+	WRITE_ONCE(rb->user_page->data_head, head);
 
 	/*
 	 * We must publish the head before decrementing the nest count,
@@ -496,7 +496,7 @@ void perf_aux_output_end(struct perf_output_handle *handle, unsigned long size)
 		perf_event_aux_event(handle->event, aux_head, size,
 				     handle->aux_flags);
 
-	rb->user_page->aux_head = rb->aux_head;
+	WRITE_ONCE(rb->user_page->aux_head, rb->aux_head);
 	if (rb_need_aux_wakeup(rb))
 		wakeup = true;
 
@@ -528,7 +528,7 @@ int perf_aux_output_skip(struct perf_output_handle *handle, unsigned long size)
 
 	rb->aux_head += size;
 
-	rb->user_page->aux_head = rb->aux_head;
+	WRITE_ONCE(rb->user_page->aux_head, rb->aux_head);
 	if (rb_need_aux_wakeup(rb)) {
 		perf_output_wakeup(handle);
 		handle->wakeup = rb->aux_wakeup + rb->aux_watermark;
-- 
2.20.1

[PATCH AUTOSEL 5.1 24/70] gpio: fix gpio-adp5588 build errors

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit e9646f0f5bb62b7d43f0968f39d536cfe7123b53 ]

The gpio-adp5588 driver uses interfaces that are provided by
GPIOLIB_IRQCHIP, so select that symbol in its Kconfig entry.

Fixes these build errors:

../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_handler’:
../drivers/gpio/gpio-adp5588.c:266:26: error: ‘struct gpio_chip’ has no member named ‘irq’
            dev->gpio_chip.irq.domain, gpio));
                          ^
../drivers/gpio/gpio-adp5588.c: In function ‘adp5588_irq_setup’:
../drivers/gpio/gpio-adp5588.c:298:2: error: implicit declaration of function ‘gpiochip_irqchip_add_nested’ [-Werror=implicit-function-declaration]
  ret = gpiochip_irqchip_add_nested(&dev->gpio_chip,
  ^
../drivers/gpio/gpio-adp5588.c:307:2: error: implicit declaration of function ‘gpiochip_set_nested_irqchip’ [-Werror=implicit-function-declaration]
  gpiochip_set_nested_irqchip(&dev->gpio_chip,
  ^

Fixes: 459773ae8dbb ("gpio: adp5588-gpio: support interrupt controller")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3f50526a771f..864a1ba7aa3a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -824,6 +824,7 @@ config GPIO_ADP5588
 config GPIO_ADP5588_IRQ
 	bool "Interrupt controller support for ADP5588"
 	depends on GPIO_ADP5588=y
+	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to enable the adp5588 to be used as an interrupt
 	  controller. It requires the driver to be built in the kernel.
-- 
2.20.1

[PATCH AUTOSEL 5.1 25/70] efi/x86/Add missing error handling to old_memmap 1:1 mapping code

[Sasha Levin]

From: Gen Zhang <blackgod016574@gmail.com>

[ Upstream commit 4e78921ba4dd0aca1cc89168f45039add4183f8e ]

The old_memmap flow in efi_call_phys_prolog() performs numerous memory
allocations, and either does not check for failure at all, or it does
but fails to propagate it back to the caller, which may end up calling
into the firmware with an incomplete 1:1 mapping.

So let's fix this by returning NULL from efi_call_phys_prolog() on
memory allocation failures only, and by handling this condition in the
caller. Also, clean up any half baked sets of page tables that we may
have created before returning with a NULL return value.

Note that any failure at this level will trigger a panic() two levels
up, so none of this makes a huge difference, but it is a nice cleanup
nonetheless.

[ardb: update commit log, add efi_call_phys_epilog() call on error path]

Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Bradford <robert.bradford@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190525112559.7917-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/efi/efi.c    | 2 ++
 arch/x86/platform/efi/efi_64.c | 9 ++++++---
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index e1cb01a22fa8..a7189a3b4d70 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -85,6 +85,8 @@ static efi_status_t __init phys_efi_set_virtual_address_map(
 	pgd_t *save_pgd;
 
 	save_pgd = efi_call_phys_prolog();
+	if (!save_pgd)
+		return EFI_ABORTED;
 
 	/* Disable interrupts around EFI calls: */
 	local_irq_save(flags);
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index cf0347f61b21..08ce8177c3af 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -84,13 +84,15 @@ pgd_t * __init efi_call_phys_prolog(void)
 
 	if (!efi_enabled(EFI_OLD_MEMMAP)) {
 		efi_switch_mm(&efi_mm);
-		return NULL;
+		return efi_mm.pgd;
 	}
 
 	early_code_mapping_set_exec(1);
 
 	n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
 	save_pgd = kmalloc_array(n_pgds, sizeof(*save_pgd), GFP_KERNEL);
+	if (!save_pgd)
+		return NULL;
 
 	/*
 	 * Build 1:1 identity mapping for efi=old_map usage. Note that
@@ -138,10 +140,11 @@ pgd_t * __init efi_call_phys_prolog(void)
 		pgd_offset_k(pgd * PGDIR_SIZE)->pgd &= ~_PAGE_NX;
 	}
 
-out:
 	__flush_tlb_all();
-
 	return save_pgd;
+out:
+	efi_call_phys_epilog(save_pgd);
+	return NULL;
 }
 
 void __init efi_call_phys_epilog(pgd_t *save_pgd)
-- 
2.20.1

[PATCH AUTOSEL 5.1 26/70] net: stmmac: update rx tail pointer register to fix rx dma hang issue.

[Sasha Levin]

From: Biao Huang <biao.huang@mediatek.com>

[ Upstream commit 4523a5611526709ec9b4e2574f1bb7818212651e ]

Currently we will not update the receive descriptor tail pointer in
stmmac_rx_refill. Rx dma will think no available descriptors and stop
once received packets exceed DMA_RX_SIZE, so that the rx only test will fail.

Update the receive tail pointer in stmmac_rx_refill to add more descriptors
to the rx channel, so packets can be received continually

Fixes: 54139cf3bb33 ("net: stmmac: adding multiple buffers for rx")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3c409862c52e..8cebc44108b2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3338,6 +3338,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
 		entry = STMMAC_GET_ENTRY(entry, DMA_RX_SIZE);
 	}
 	rx_q->dirty_rx = entry;
+	stmmac_set_rx_tail_ptr(priv, priv->ioaddr, rx_q->rx_tail_addr, queue);
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 5.1 27/70] net: stmmac: fix csr_clk can't be zero issue

[Sasha Levin]

From: Biao Huang <biao.huang@mediatek.com>

[ Upstream commit 5e7f7fc538d894b2d9aa41876b8dcf35f5fe11e6 ]

The specific clk_csr value can be zero, and
stmmac_clk is necessary for MDC clock which can be set dynamically.
So, change the condition from plat->clk_csr to plat->stmmac_clk to
fix clk_csr can't be zero issue.

Fixes: cd7201f477b9 ("stmmac: MDC clock dynamically based on the csr clock input")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c     | 6 +++---
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 5 ++++-
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8cebc44108b2..635d88d82610 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4380,10 +4380,10 @@ int stmmac_dvr_probe(struct device *device,
 	 * set the MDC clock dynamically according to the csr actual
 	 * clock input.
 	 */
-	if (!priv->plat->clk_csr)
-		stmmac_clk_csr_set(priv);
-	else
+	if (priv->plat->clk_csr >= 0)
 		priv->clk_csr = priv->plat->clk_csr;
+	else
+		stmmac_clk_csr_set(priv);
 
 	stmmac_check_pcs_mode(priv);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 3031f2bf15d6..f45bfbef97d0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -408,7 +408,10 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	/* Default to phy auto-detection */
 	plat->phy_addr = -1;
 
-	/* Get clk_csr from device tree */
+	/* Default to get clk_csr from stmmac_clk_crs_set(),
+	 * or get clk_csr from device tree.
+	 */
+	plat->clk_csr = -1;
 	of_property_read_u32(np, "clk_csr", &plat->clk_csr);
 
 	/* "snps,phy-addr" is not a standard property. Mark it as deprecated
-- 
2.20.1

[PATCH AUTOSEL 5.1 28/70] net: stmmac: dwmac-mediatek: modify csr_clk value to fix mdio read/write fail

[Sasha Levin]

From: Biao Huang <biao.huang@mediatek.com>

[ Upstream commit f4ca7a9260dfe700f2a16f0881825de625067515 ]

1. the frequency of csr clock is 66.5MHz, so the csr_clk value should
be 0 other than 5.
2. the csr_clk can be got from device tree, so remove initialization here.

Fixes: 9992f37e346b ("stmmac: dwmac-mediatek: add support for mt2712")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
index bf2562995fc8..126b66bb73a6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
@@ -346,8 +346,6 @@ static int mediatek_dwmac_probe(struct platform_device *pdev)
 		return PTR_ERR(plat_dat);
 
 	plat_dat->interface = priv_plat->phy_mode;
-	/* clk_csr_i = 250-300MHz & MDC = clk_csr_i/124 */
-	plat_dat->clk_csr = 5;
 	plat_dat->has_gmac4 = 1;
 	plat_dat->has_gmac = 0;
 	plat_dat->pmt = 0;
-- 
2.20.1

[PATCH AUTOSEL 5.1 29/70] io_uring: Fix __io_uring_register() false success

[Sasha Levin]

From: Pavel Begunkov <asml.silence@gmail.com>

[ Upstream commit a278682dad37fd2f8d2f30d8e84e376a856ab472 ]

If io_copy_iov() fails, it will break the loop and report success,
albeit partially completed operation.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index 30a5687a17b6..69ff94558758 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -2505,7 +2505,7 @@ static int io_sqe_buffer_register(struct io_ring_ctx *ctx, void __user *arg,
 
 		ret = io_copy_iov(ctx, &iov, arg, i);
 		if (ret)
-			break;
+			goto err;
 
 		/*
 		 * Don't impose further limits on the size and buffer
-- 
2.20.1

[PATCH AUTOSEL 5.1 30/70] dpaa2-eth: Fix potential spectre issue

[Sasha Levin]

From: Ioana Radulescu <ruxandra.radulescu@nxp.com>

[ Upstream commit 5a20a093d965560f632b2ec325f8876918f78165 ]

Smatch reports a potential spectre vulnerability in the dpaa2-eth
driver, where the value of rxnfc->fs.location (which is provided
from user-space) is used as index in an array.

Add a call to array_index_nospec() to sanitize the access.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
index 591dfcf76adb..0610fc0bebc2 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/net_tstamp.h>
+#include <linux/nospec.h>
 
 #include "dpni.h"	/* DPNI_LINK_OPT_* */
 #include "dpaa2-eth.h"
@@ -589,6 +590,8 @@ static int dpaa2_eth_get_rxnfc(struct net_device *net_dev,
 	case ETHTOOL_GRXCLSRULE:
 		if (rxnfc->fs.location >= max_rules)
 			return -EINVAL;
+		rxnfc->fs.location = array_index_nospec(rxnfc->fs.location,
+							max_rules);
 		if (!priv->cls_rules[rxnfc->fs.location].in_use)
 			return -EINVAL;
 		rxnfc->fs = priv->cls_rules[rxnfc->fs.location].fs;
-- 
2.20.1

[PATCH AUTOSEL 5.1 31/70] dpaa2-eth: Use PTR_ERR_OR_ZERO where appropriate

[Sasha Levin]

From: Ioana Radulescu <ruxandra.radulescu@nxp.com>

[ Upstream commit bd8460fa4de46e9d6177af4fe33bf0763a7af4b7 ]

Use PTR_ERR_OR_ZERO instead of PTR_ERR in cases where
zero is a valid input. Reported by smatch.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index 57cbaa38d247..df371c81a706 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -1966,7 +1966,7 @@ alloc_channel(struct dpaa2_eth_priv *priv)
 
 	channel->dpcon = setup_dpcon(priv);
 	if (IS_ERR_OR_NULL(channel->dpcon)) {
-		err = PTR_ERR(channel->dpcon);
+		err = PTR_ERR_OR_ZERO(channel->dpcon);
 		goto err_setup;
 	}
 
@@ -2022,7 +2022,7 @@ static int setup_dpio(struct dpaa2_eth_priv *priv)
 		/* Try to allocate a channel */
 		channel = alloc_channel(priv);
 		if (IS_ERR_OR_NULL(channel)) {
-			err = PTR_ERR(channel);
+			err = PTR_ERR_OR_ZERO(channel);
 			if (err != -EPROBE_DEFER)
 				dev_info(dev,
 					 "No affine channel for cpu %d and above\n", i);
-- 
2.20.1

[PATCH AUTOSEL 5.1 32/70] net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE()

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 3e66b7cc50ef921121babc91487e1fb98af1ba6e ]

Building with Clang reports the redundant use of MODULE_DEVICE_TABLE():

drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table'
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:90:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table               \
                    ^
<scratch space>:85:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^

This drops the one further from the table definition to match the common
use of MODULE_DEVICE_TABLE().

Fixes: 07563c711fbc ("EISA bus MODALIAS attributes support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/dec/tulip/de4x5.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index 66535d1653f6..f16853c3c851 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -2107,7 +2107,6 @@ static struct eisa_driver de4x5_eisa_driver = {
 		.remove  = de4x5_eisa_remove,
         }
 };
-MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
 #endif
 
 #ifdef CONFIG_PCI
-- 
2.20.1

[PATCH AUTOSEL 5.1 33/70] ACPI/PCI: PM: Add missing wakeup.flags.valid checks

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 9a51c6b1f9e0239a9435db036b212498a2a3b75c ]

Both acpi_pci_need_resume() and acpi_dev_needs_resume() check if the
current ACPI wakeup configuration of the device matches what is
expected as far as system wakeup from sleep states is concerned, as
reflected by the device_may_wakeup() return value for the device.

However, they only should do that if wakeup.flags.valid is set for
the device's ACPI companion, because otherwise the wakeup.prepare_count
value for it is meaningless.

Add the missing wakeup.flags.valid checks to these functions.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/device_pm.c | 4 ++--
 drivers/pci/pci-acpi.c   | 3 ++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 824ae985ad93..ccb59768b1f3 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -949,8 +949,8 @@ static bool acpi_dev_needs_resume(struct device *dev, struct acpi_device *adev)
 	u32 sys_target = acpi_target_system_state();
 	int ret, state;
 
-	if (!pm_runtime_suspended(dev) || !adev ||
-	    device_may_wakeup(dev) != !!adev->wakeup.prepare_count)
+	if (!pm_runtime_suspended(dev) || !adev || (adev->wakeup.flags.valid &&
+	    device_may_wakeup(dev) != !!adev->wakeup.prepare_count))
 		return true;
 
 	if (sys_target == ACPI_STATE_S0)
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index e1949f7efd9c..bf32fde328c2 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -666,7 +666,8 @@ static bool acpi_pci_need_resume(struct pci_dev *dev)
 	if (!adev || !acpi_device_power_manageable(adev))
 		return false;
 
-	if (device_may_wakeup(&dev->dev) != !!adev->wakeup.prepare_count)
+	if (adev->wakeup.flags.valid &&
+	    device_may_wakeup(&dev->dev) != !!adev->wakeup.prepare_count)
 		return true;
 
 	if (acpi_target_system_state() == ACPI_STATE_S0)
-- 
2.20.1

[PATCH AUTOSEL 5.1 34/70] PCI: PM: Avoid possible suspend-to-idle issue

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit d491f2b75237ef37d8867830ab7fad8d9659e853 ]

If a PCI driver leaves the device handled by it in D0 and calls
pci_save_state() on the device in its ->suspend() or ->suspend_late()
callback, it can expect the device to stay in D0 over the whole
s2idle cycle.  However, that may not be the case if there is a
spurious wakeup while the system is suspended, because in that case
pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq()
which calls pci_restore_state(), via pci_pm_default_resume_early(),
so state_saved is cleared and the second iteration of
pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which
may change the power state of the device.

To avoid that, add a new internal flag, skip_bus_pm, that will be set
by pci_pm_suspend_noirq() when it runs for the first time during the
given system suspend-resume cycle if the state of the device has
been saved already and the device is still in D0.  Setting that flag
will cause the next iterations of pci_pm_suspend_noirq() to set
state_saved for pci_pm_resume_noirq(), so that it always restores the
device state from the originally saved data, and avoid calling
pci_prepare_to_sleep() for the device.

Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci-driver.c | 17 ++++++++++++++++-
 include/linux/pci.h      |  1 +
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 71853befd435..6375c2f32ba1 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -734,6 +734,8 @@ static int pci_pm_suspend(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
+	pci_dev->skip_bus_pm = false;
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_suspend(dev, PMSG_SUSPEND);
 
@@ -827,7 +829,20 @@ static int pci_pm_suspend_noirq(struct device *dev)
 		}
 	}
 
-	if (!pci_dev->state_saved) {
+	if (pci_dev->skip_bus_pm) {
+		/*
+		 * The function is running for the second time in a row without
+		 * going through full resume, which is possible only during
+		 * suspend-to-idle in a spurious wakeup case.  Moreover, the
+		 * device was originally left in D0, so its power state should
+		 * not be changed here and the device register values saved
+		 * originally should be restored on resume again.
+		 */
+		pci_dev->state_saved = true;
+	} else if (pci_dev->state_saved) {
+		if (pci_dev->current_state == PCI_D0)
+			pci_dev->skip_bus_pm = true;
+	} else {
 		pci_save_state(pci_dev);
 		if (pci_power_manageable(pci_dev))
 			pci_prepare_to_sleep(pci_dev);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 2c056a7a728a..1ad70686f62e 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -344,6 +344,7 @@ struct pci_dev {
 						   D3cold, not set for devices
 						   powered on/off by the
 						   corresponding bridge */
+	unsigned int	skip_bus_pm:1;	/* Internal: Skip bus-level PM */
 	unsigned int	ignore_hotplug:1;	/* Ignore hotplug events */
 	unsigned int	hotplug_user_indicators:1; /* SlotCtl indicators
 						      controlled exclusively by
-- 
2.20.1

[PATCH AUTOSEL 5.1 35/70] loop: Don't change loop device under exclusive opener

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 33ec3e53e7b1869d7851e59e126bdb0fe0bd1982 ]

Loop module allows calling LOOP_SET_FD while there are other openers of
the loop device. Even exclusive ones. This can lead to weird
consequences such as kernel deadlocks like:

mount_bdev()				lo_ioctl()
  udf_fill_super()
    udf_load_vrs()
      sb_set_blocksize() - sets desired block size B
      udf_tread()
        sb_bread()
          __bread_gfp(bdev, block, B)
					  loop_set_fd()
					    set_blocksize()
            - now __getblk_slow() indefinitely loops because B != bdev
              block size

Fix the problem by disallowing LOOP_SET_FD ioctl when there are
exclusive openers of a loop device.

[Deliberately chosen not to CC stable as a user with priviledges to
trigger this race has other means of taking the system down and this
has a potential of breaking some weird userspace setup]

Reported-and-tested-by: syzbot+10007d66ca02b08f0e60@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/loop.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index bf1c61cab8eb..21349a17f7f5 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -919,9 +919,20 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
 	if (!file)
 		goto out;
 
+	/*
+	 * If we don't hold exclusive handle for the device, upgrade to it
+	 * here to avoid changing device under exclusive owner.
+	 */
+	if (!(mode & FMODE_EXCL)) {
+		bdgrab(bdev);
+		error = blkdev_get(bdev, mode | FMODE_EXCL, loop_set_fd);
+		if (error)
+			goto out_putf;
+	}
+
 	error = mutex_lock_killable(&loop_ctl_mutex);
 	if (error)
-		goto out_putf;
+		goto out_bdev;
 
 	error = -EBUSY;
 	if (lo->lo_state != Lo_unbound)
@@ -985,10 +996,15 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
 	mutex_unlock(&loop_ctl_mutex);
 	if (partscan)
 		loop_reread_partitions(lo, bdev);
+	if (!(mode & FMODE_EXCL))
+		blkdev_put(bdev, mode | FMODE_EXCL);
 	return 0;
 
 out_unlock:
 	mutex_unlock(&loop_ctl_mutex);
+out_bdev:
+	if (!(mode & FMODE_EXCL))
+		blkdev_put(bdev, mode | FMODE_EXCL);
 out_putf:
 	fput(file);
 out:
-- 
2.20.1

Re: [PATCH AUTOSEL 5.1 35/70] loop: Don't change loop device under exclusive opener

[Jan Kara]

On Sat 08-06-19 07:39:14, Sasha Levin wrote:
> From: Jan Kara <jack@suse.cz>
> 
> [ Upstream commit 33ec3e53e7b1869d7851e59e126bdb0fe0bd1982 ]

Please don't push this to stable kernels because...

> [Deliberately chosen not to CC stable as a user with priviledges to
> trigger this race has other means of taking the system down and this
> has a potential of breaking some weird userspace setup]

... of this. Thanks!

								Honza
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

Re: [PATCH AUTOSEL 5.1 35/70] loop: Don't change loop device under exclusive opener

[Sasha Levin]

On Mon, Jun 10, 2019 at 11:00:13AM +0200, Jan Kara wrote:
>On Sat 08-06-19 07:39:14, Sasha Levin wrote:
>> From: Jan Kara <jack@suse.cz>
>>
>> [ Upstream commit 33ec3e53e7b1869d7851e59e126bdb0fe0bd1982 ]
>
>Please don't push this to stable kernels because...

I've dropped this, but...

>> [Deliberately chosen not to CC stable as a user with priviledges to
>> trigger this race has other means of taking the system down and this
>> has a potential of breaking some weird userspace setup]
>
>... of this. Thanks!

Can't this be triggered by an "innocent" user, rather as part of an
attack? Why can't this race happen during regular usage?

--
Thanks,
Sasha

Re: [PATCH AUTOSEL 5.1 35/70] loop: Don't change loop device under exclusive opener

[Jan Kara]

On Wed 19-06-19 16:11:36, Sasha Levin wrote:
> On Mon, Jun 10, 2019 at 11:00:13AM +0200, Jan Kara wrote:
> > On Sat 08-06-19 07:39:14, Sasha Levin wrote:
> > > From: Jan Kara <jack@suse.cz>
> > > 
> > > [ Upstream commit 33ec3e53e7b1869d7851e59e126bdb0fe0bd1982 ]
> > 
> > Please don't push this to stable kernels because...
> 
> I've dropped this, but...

OK, thanks.

> > > [Deliberately chosen not to CC stable as a user with priviledges to
> > > trigger this race has other means of taking the system down and this
> > > has a potential of breaking some weird userspace setup]
> > 
> > ... of this. Thanks!
> 
> Can't this be triggered by an "innocent" user, rather as part of an
> attack? Why can't this race happen during regular usage?

Well, the problem happens when mount happens on loop device when someone
modifies the backing file of the loop device. So for this to be
triggerable, you have to have control over assignment of backing files to
loop devices (you have to be owner of these loop devices to be able to do
this - pretty much means root in most setups) and be able to trigger mount
on this device. If you have these capabilities, there are much more
efficient ways to gain full administrator priviledges on the system,
deadlocking the kernel is thus the least of your worries.

								Honza
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

[PATCH AUTOSEL 5.1 36/70] drm/etnaviv: lock MMU while dumping core

[Sasha Levin]

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit 1396500d673bd027683a0609ff84dca7eb6ea2e7 ]

The devcoredump needs to operate on a stable state of the MMU while
it is writing the MMU state to the coredump. The missing lock
allowed both the userspace submit, as well as the GPU job finish
paths to mutate the MMU state while a coredump is under way.

Fixes: a8c21a5451d8 (drm/etnaviv: add initial etnaviv DRM driver)
Reported-by: David Jander <david@protonic.nl>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: David Jander <david@protonic.nl>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/etnaviv/etnaviv_dump.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_dump.c b/drivers/gpu/drm/etnaviv/etnaviv_dump.c
index 33854c94cb85..515515ef24f9 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_dump.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_dump.c
@@ -125,6 +125,8 @@ void etnaviv_core_dump(struct etnaviv_gpu *gpu)
 		return;
 	etnaviv_dump_core = false;
 
+	mutex_lock(&gpu->mmu->lock);
+
 	mmu_size = etnaviv_iommu_dump_size(gpu->mmu);
 
 	/* We always dump registers, mmu, ring and end marker */
@@ -167,6 +169,7 @@ void etnaviv_core_dump(struct etnaviv_gpu *gpu)
 	iter.start = __vmalloc(file_size, GFP_KERNEL | __GFP_NOWARN | __GFP_NORETRY,
 			       PAGE_KERNEL);
 	if (!iter.start) {
+		mutex_unlock(&gpu->mmu->lock);
 		dev_warn(gpu->dev, "failed to allocate devcoredump file\n");
 		return;
 	}
@@ -234,6 +237,8 @@ void etnaviv_core_dump(struct etnaviv_gpu *gpu)
 					 obj->base.size);
 	}
 
+	mutex_unlock(&gpu->mmu->lock);
+
 	etnaviv_core_dump_header(&iter, ETDUMP_BUF_END, iter.data);
 
 	dev_coredumpv(gpu->dev, iter.start, iter.data - iter.start, GFP_KERNEL);
-- 
2.20.1

[PATCH AUTOSEL 5.1 37/70] net: aquantia: tx clean budget logic error

[Sasha Levin]

From: Igor Russkikh <Igor.Russkikh@aquantia.com>

[ Upstream commit 31bafc49a7736989e4c2d9f7280002c66536e590 ]

In case no other traffic happening on the ring, full tx cleanup
may not be completed. That may cause socket buffer to overflow
and tx traffic to stuck until next activity on the ring happens.

This is due to logic error in budget variable decrementor.
Variable is compared with zero, and then post decremented,
causing it to become MAX_INT. Solution is remove decrementor
from the `for` statement and rewrite it in a clear way.

Fixes: b647d3980948e ("net: aquantia: Add tx clean budget and valid budget handling logic")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
index e2ffb159cbe2..bf4aa7060f1a 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
@@ -139,10 +139,10 @@ void aq_ring_queue_stop(struct aq_ring_s *ring)
 bool aq_ring_tx_clean(struct aq_ring_s *self)
 {
 	struct device *dev = aq_nic_get_dev(self->aq_nic);
-	unsigned int budget = AQ_CFG_TX_CLEAN_BUDGET;
+	unsigned int budget;
 
-	for (; self->sw_head != self->hw_head && budget--;
-		self->sw_head = aq_ring_next_dx(self, self->sw_head)) {
+	for (budget = AQ_CFG_TX_CLEAN_BUDGET;
+	     budget && self->sw_head != self->hw_head; budget--) {
 		struct aq_ring_buff_s *buff = &self->buff_ring[self->sw_head];
 
 		if (likely(buff->is_mapped)) {
@@ -167,6 +167,7 @@ bool aq_ring_tx_clean(struct aq_ring_s *self)
 
 		buff->pa = 0U;
 		buff->eop_index = 0xffffU;
+		self->sw_head = aq_ring_next_dx(self, self->sw_head);
 	}
 
 	return !!budget;
-- 
2.20.1

[PATCH AUTOSEL 5.1 38/70] net: aquantia: fix LRO with FCS error

[Sasha Levin]

From: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>

[ Upstream commit eaeb3b7494ba9159323814a8ce8af06a9277d99b ]

Driver stops producing skbs on ring if a packet with FCS error
was coalesced into LRO session. Ring gets hang forever.

Thats a logical error in driver processing descriptors:
When rx_stat indicates MAC Error, next pointer and eop flags
are not filled. This confuses driver so it waits for descriptor 0
to be filled by HW.

Solution is fill next pointer and eop flag even for packets with FCS error.

Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../aquantia/atlantic/hw_atl/hw_atl_b0.c      | 61 ++++++++++---------
 1 file changed, 32 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index b31dba1b1a55..ec302fdfec63 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -702,38 +702,41 @@ static int hw_atl_b0_hw_ring_rx_receive(struct aq_hw_s *self,
 		if ((rx_stat & BIT(0)) || rxd_wb->type & 0x1000U) {
 			/* MAC error or DMA error */
 			buff->is_error = 1U;
-		} else {
-			if (self->aq_nic_cfg->is_rss) {
-				/* last 4 byte */
-				u16 rss_type = rxd_wb->type & 0xFU;
-
-				if (rss_type && rss_type < 0x8U) {
-					buff->is_hash_l4 = (rss_type == 0x4 ||
-					rss_type == 0x5);
-					buff->rss_hash = rxd_wb->rss_hash;
-				}
+		}
+		if (self->aq_nic_cfg->is_rss) {
+			/* last 4 byte */
+			u16 rss_type = rxd_wb->type & 0xFU;
+
+			if (rss_type && rss_type < 0x8U) {
+				buff->is_hash_l4 = (rss_type == 0x4 ||
+				rss_type == 0x5);
+				buff->rss_hash = rxd_wb->rss_hash;
 			}
+		}
 
-			if (HW_ATL_B0_RXD_WB_STAT2_EOP & rxd_wb->status) {
-				buff->len = rxd_wb->pkt_len %
-					AQ_CFG_RX_FRAME_MAX;
-				buff->len = buff->len ?
-					buff->len : AQ_CFG_RX_FRAME_MAX;
-				buff->next = 0U;
-				buff->is_eop = 1U;
+		if (HW_ATL_B0_RXD_WB_STAT2_EOP & rxd_wb->status) {
+			buff->len = rxd_wb->pkt_len %
+				AQ_CFG_RX_FRAME_MAX;
+			buff->len = buff->len ?
+				buff->len : AQ_CFG_RX_FRAME_MAX;
+			buff->next = 0U;
+			buff->is_eop = 1U;
+		} else {
+			buff->len =
+				rxd_wb->pkt_len > AQ_CFG_RX_FRAME_MAX ?
+				AQ_CFG_RX_FRAME_MAX : rxd_wb->pkt_len;
+
+			if (HW_ATL_B0_RXD_WB_STAT2_RSCCNT &
+				rxd_wb->status) {
+				/* LRO */
+				buff->next = rxd_wb->next_desc_ptr;
+				++ring->stats.rx.lro_packets;
 			} else {
-				if (HW_ATL_B0_RXD_WB_STAT2_RSCCNT &
-					rxd_wb->status) {
-					/* LRO */
-					buff->next = rxd_wb->next_desc_ptr;
-					++ring->stats.rx.lro_packets;
-				} else {
-					/* jumbo */
-					buff->next =
-						aq_ring_next_dx(ring,
-								ring->hw_head);
-					++ring->stats.rx.jumbo_packets;
-				}
+				/* jumbo */
+				buff->next =
+					aq_ring_next_dx(ring,
+							ring->hw_head);
+				++ring->stats.rx.jumbo_packets;
 			}
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.1 39/70] i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr

[Sasha Levin]

From: Yingjoe Chen <yingjoe.chen@mediatek.com>

[ Upstream commit a0692f0eef91354b62c2b4c94954536536be5425 ]

If I2C_M_RECV_LEN check failed, msgs[i].buf allocated by memdup_user
will not be freed. Pump index up so it will be freed.

Fixes: 838bfa6049fb ("i2c-dev: Add support for I2C_M_RECV_LEN")
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/i2c-dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 3f7b9af11137..776f36690448 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -283,6 +283,7 @@ static noinline int i2cdev_ioctl_rdwr(struct i2c_client *client,
 			    msgs[i].len < 1 || msgs[i].buf[0] < 1 ||
 			    msgs[i].len < msgs[i].buf[0] +
 					     I2C_SMBUS_BLOCK_MAX) {
+				i++;
 				res = -EINVAL;
 				break;
 			}
-- 
2.20.1

[PATCH AUTOSEL 5.1 40/70] i2c: mlxcpld: Fix wrong initialization order in probe

[Sasha Levin]

From: Vadim Pasternak <vadimp@mellanox.com>

[ Upstream commit 13067ef73f337336e3149f5bb9f3fd05fe7f87a0 ]

Fix wrong order in probing routine initialization - field `base_addr'
is used before it's initialized. Move assignment of 'priv->base_addr`
to the beginning, prior the call to mlxcpld_i2c_read_comm().
Wrong order caused the first read of capability register to be executed
at wrong offset 0x0 instead of 0x2000. By chance it was a "good
garbage" at 0x0 offset.

Fixes: 313ce648b5a4 ("i2c: mlxcpld: Add support for extended transaction length for i2c-mlxcpld")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mlxcpld.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c
index 745ed43a22d6..2fd717d8dd30 100644
--- a/drivers/i2c/busses/i2c-mlxcpld.c
+++ b/drivers/i2c/busses/i2c-mlxcpld.c
@@ -503,6 +503,7 @@ static int mlxcpld_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, priv);
 
 	priv->dev = &pdev->dev;
+	priv->base_addr = MLXPLAT_CPLD_LPC_I2C_BASE_ADDR;
 
 	/* Register with i2c layer */
 	mlxcpld_i2c_adapter.timeout = usecs_to_jiffies(MLXCPLD_I2C_XFER_TO);
@@ -518,7 +519,6 @@ static int mlxcpld_i2c_probe(struct platform_device *pdev)
 		mlxcpld_i2c_adapter.nr = pdev->id;
 	priv->adap = mlxcpld_i2c_adapter;
 	priv->adap.dev.parent = &pdev->dev;
-	priv->base_addr = MLXPLAT_CPLD_LPC_I2C_BASE_ADDR;
 	i2c_set_adapdata(&priv->adap, priv);
 
 	err = i2c_add_numbered_adapter(&priv->adap);
-- 
2.20.1

[PATCH AUTOSEL 5.1 41/70] ALSA: hda - Force polling mode on CNL for fixing codec communication

[Sasha Levin]

From: Bard Liao <yung-chuan.liao@linux.intel.com>

[ Upstream commit fa763f1b2858752e6150ffff46886a1b7faffc82 ]

We observed the same issue as reported by commit a8d7bde23e7130686b7662
("ALSA: hda - Force polling mode on CFL for fixing codec communication")
We don't have a better solution. So apply the same workaround to CNL.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 2ec91085fa3e..a93468ffb85c 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -375,6 +375,7 @@ enum {
 
 #define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98)
 #define IS_CFL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa348)
+#define IS_CNL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x9dc8)
 
 static char *driver_short_names[] = {
 	[AZX_DRIVER_ICH] = "HDA Intel",
@@ -1700,8 +1701,8 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci,
 	else
 		chip->bdl_pos_adj = bdl_pos_adj[dev];
 
-	/* Workaround for a communication error on CFL (bko#199007) */
-	if (IS_CFL(pci))
+	/* Workaround for a communication error on CFL (bko#199007) and CNL */
+	if (IS_CFL(pci) || IS_CNL(pci))
 		chip->polling_mode = 1;
 
 	err = azx_bus_init(chip, model[dev], &pci_hda_io_ops);
-- 
2.20.1

[PATCH AUTOSEL 5.1 42/70] configfs: Fix use-after-free when accessing sd->s_dentry

[Sasha Levin]

From: Sahitya Tummala <stummala@codeaurora.org>

[ Upstream commit f6122ed2a4f9c9c1c073ddf6308d1b2ac10e0781 ]

In the vfs_statx() context, during path lookup, the dentry gets
added to sd->s_dentry via configfs_attach_attr(). In the end,
vfs_statx() kills the dentry by calling path_put(), which invokes
configfs_d_iput(). Ideally, this dentry must be removed from
sd->s_dentry but it doesn't if the sd->s_count >= 3. As a result,
sd->s_dentry is holding reference to a stale dentry pointer whose
memory is already freed up. This results in use-after-free issue,
when this stale sd->s_dentry is accessed later in
configfs_readdir() path.

This issue can be easily reproduced, by running the LTP test case -
sh fs_racer_file_list.sh /config
(https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/fs/racer/fs_racer_file_list.sh)

Fixes: 76ae281f6307 ('configfs: fix race between dentry put and lookup')
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/configfs/dir.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 39843fa7e11b..073e788f7810 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -58,15 +58,13 @@ static void configfs_d_iput(struct dentry * dentry,
 	if (sd) {
 		/* Coordinate with configfs_readdir */
 		spin_lock(&configfs_dirent_lock);
-		/* Coordinate with configfs_attach_attr where will increase
-		 * sd->s_count and update sd->s_dentry to new allocated one.
-		 * Only set sd->dentry to null when this dentry is the only
-		 * sd owner.
-		 * If not do so, configfs_d_iput may run just after
-		 * configfs_attach_attr and set sd->s_dentry to null
-		 * even it's still in use.
+		/*
+		 * Set sd->s_dentry to null only when this dentry is the one
+		 * that is going to be killed.  Otherwise configfs_d_iput may
+		 * run just after configfs_attach_attr and set sd->s_dentry to
+		 * NULL even it's still in use.
 		 */
-		if (atomic_read(&sd->s_count) <= 2)
+		if (sd->s_dentry == dentry)
 			sd->s_dentry = NULL;
 
 		spin_unlock(&configfs_dirent_lock);
-- 
2.20.1

[PATCH AUTOSEL 5.1 43/70] perf data: Fix 'strncat may truncate' build failure with recent gcc

[Sasha Levin]

From: Shawn Landden <shawn@git.icu>

[ Upstream commit 97acec7df172cd1e450f81f5e293c0aa145a2797 ]

This strncat() is safe because the buffer was allocated with zalloc(),
however gcc doesn't know that. Since the string always has 4 non-null
bytes, just use memcpy() here.

    CC       /home/shawn/linux/tools/perf/util/data-convert-bt.o
  In file included from /usr/include/string.h:494,
                   from /home/shawn/linux/tools/lib/traceevent/event-parse.h:27,
                   from util/data-convert-bt.c:22:
  In function ‘strncat’,
      inlined from ‘string_set_value’ at util/data-convert-bt.c:274:4:
  /usr/include/powerpc64le-linux-gnu/bits/string_fortified.h:136:10: error: ‘__builtin_strncat’ output may be truncated copying 4 bytes from a string of length 4 [-Werror=stringop-truncation]
    136 |   return __builtin___strncat_chk (__dest, __src, __len, __bos (__dest));
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Shawn Landden <shawn@git.icu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 20190518183238.10954-1-shawn@git.icu
Link: https://lkml.kernel.org/n/tip-289f1jice17ta7tr3tstm9jm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/data-convert-bt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/data-convert-bt.c b/tools/perf/util/data-convert-bt.c
index 26af43ad9ddd..53d49fd8b8ae 100644
--- a/tools/perf/util/data-convert-bt.c
+++ b/tools/perf/util/data-convert-bt.c
@@ -271,7 +271,7 @@ static int string_set_value(struct bt_ctf_field *field, const char *string)
 				if (i > 0)
 					strncpy(buffer, string, i);
 			}
-			strncat(buffer + p, numstr, 4);
+			memcpy(buffer + p, numstr, 4);
 			p += 3;
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.1 44/70] s390/zcrypt: Fix wrong dispatching for control domain CPRBs

[Sasha Levin]

From: Harald Freudenberger <freude@linux.ibm.com>

[ Upstream commit 7379e652797c0b9b5f6caea1576f2dff9ce6a708 ]

The zcrypt device driver does not handle CPRBs which address
a control domain correctly. This fix introduces a workaround:
The domain field of the request CPRB is checked if there is
a valid domain value in there. If this is true and the value
is a control only domain (a domain which is enabled in the
crypto config ADM mask but disabled in the AQM mask) the
CPRB is forwarded to the default usage domain. If there is
no default domain, the request is rejected with an ENODEV.

This fix is important for maintaining crypto adapters. For
example one LPAR can use a crypto adapter domain ('Control
and Usage') but another LPAR needs to be able to maintain
this adapter domain ('Control'). Scenarios like this did
not work properly and the patch enables this.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/ap.h       |  4 ++--
 drivers/s390/crypto/ap_bus.c     | 26 ++++++++++++++++++++++----
 drivers/s390/crypto/ap_bus.h     |  3 +++
 drivers/s390/crypto/zcrypt_api.c | 17 ++++++++++++++---
 4 files changed, 41 insertions(+), 9 deletions(-)

diff --git a/arch/s390/include/asm/ap.h b/arch/s390/include/asm/ap.h
index e94a0a28b5eb..aea32dda3d14 100644
--- a/arch/s390/include/asm/ap.h
+++ b/arch/s390/include/asm/ap.h
@@ -160,8 +160,8 @@ struct ap_config_info {
 	unsigned char Nd;		/* max # of Domains - 1 */
 	unsigned char _reserved3[10];
 	unsigned int apm[8];		/* AP ID mask */
-	unsigned int aqm[8];		/* AP queue mask */
-	unsigned int adm[8];		/* AP domain mask */
+	unsigned int aqm[8];		/* AP (usage) queue mask */
+	unsigned int adm[8];		/* AP (control) domain mask */
 	unsigned char _reserved4[16];
 } __aligned(8);
 
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 1546389d71db..6717536a633c 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -254,19 +254,37 @@ static inline int ap_test_config_card_id(unsigned int id)
 }
 
 /*
- * ap_test_config_domain(): Test, whether an AP usage domain is configured.
+ * ap_test_config_usage_domain(): Test, whether an AP usage domain
+ * is configured.
  * @domain AP usage domain ID
  *
  * Returns 0 if the usage domain is not configured
  *	   1 if the usage domain is configured or
  *	     if the configuration information is not available
  */
-static inline int ap_test_config_domain(unsigned int domain)
+int ap_test_config_usage_domain(unsigned int domain)
 {
 	if (!ap_configuration)	/* QCI not supported */
 		return domain < 16;
 	return ap_test_config(ap_configuration->aqm, domain);
 }
+EXPORT_SYMBOL(ap_test_config_usage_domain);
+
+/*
+ * ap_test_config_ctrl_domain(): Test, whether an AP control domain
+ * is configured.
+ * @domain AP control domain ID
+ *
+ * Returns 1 if the control domain is configured
+ *	   0 in all other cases
+ */
+int ap_test_config_ctrl_domain(unsigned int domain)
+{
+	if (!ap_configuration)	/* QCI not supported */
+		return 0;
+	return ap_test_config(ap_configuration->adm, domain);
+}
+EXPORT_SYMBOL(ap_test_config_ctrl_domain);
 
 /**
  * ap_query_queue(): Check if an AP queue is available.
@@ -1267,7 +1285,7 @@ static void ap_select_domain(void)
 	best_domain = -1;
 	max_count = 0;
 	for (i = 0; i < AP_DOMAINS; i++) {
-		if (!ap_test_config_domain(i) ||
+		if (!ap_test_config_usage_domain(i) ||
 		    !test_bit_inv(i, ap_perms.aqm))
 			continue;
 		count = 0;
@@ -1442,7 +1460,7 @@ static void _ap_scan_bus_adapter(int id)
 				      (void *)(long) qid,
 				      __match_queue_device_with_qid);
 		aq = dev ? to_ap_queue(dev) : NULL;
-		if (!ap_test_config_domain(dom)) {
+		if (!ap_test_config_usage_domain(dom)) {
 			if (dev) {
 				/* Queue device exists but has been
 				 * removed from configuration.
diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
index 15a98a673c5c..6f3cf37776ca 100644
--- a/drivers/s390/crypto/ap_bus.h
+++ b/drivers/s390/crypto/ap_bus.h
@@ -251,6 +251,9 @@ void ap_wait(enum ap_wait wait);
 void ap_request_timeout(struct timer_list *t);
 void ap_bus_force_rescan(void);
 
+int ap_test_config_usage_domain(unsigned int domain);
+int ap_test_config_ctrl_domain(unsigned int domain);
+
 void ap_queue_init_reply(struct ap_queue *aq, struct ap_message *ap_msg);
 struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type);
 void ap_queue_prepare_remove(struct ap_queue *aq);
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index c31b2d31cd83..03b1853464db 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -822,7 +822,7 @@ static long _zcrypt_send_cprb(struct ap_perms *perms,
 	struct ap_message ap_msg;
 	unsigned int weight, pref_weight;
 	unsigned int func_code;
-	unsigned short *domain;
+	unsigned short *domain, tdom;
 	int qid = 0, rc = -ENODEV;
 	struct module *mod;
 
@@ -834,6 +834,17 @@ static long _zcrypt_send_cprb(struct ap_perms *perms,
 	if (rc)
 		goto out;
 
+	/*
+	 * If a valid target domain is set and this domain is NOT a usage
+	 * domain but a control only domain, use the default domain as target.
+	 */
+	tdom = *domain;
+	if (tdom >= 0 && tdom < AP_DOMAINS &&
+	    !ap_test_config_usage_domain(tdom) &&
+	    ap_test_config_ctrl_domain(tdom) &&
+	    ap_domain_index >= 0)
+		tdom = ap_domain_index;
+
 	pref_zc = NULL;
 	pref_zq = NULL;
 	spin_lock(&zcrypt_list_lock);
@@ -856,8 +867,8 @@ static long _zcrypt_send_cprb(struct ap_perms *perms,
 			/* check if device is online and eligible */
 			if (!zq->online ||
 			    !zq->ops->send_cprb ||
-			    ((*domain != (unsigned short) AUTOSELECT) &&
-			     (*domain != AP_QID_QUEUE(zq->queue->qid))))
+			    (tdom != (unsigned short) AUTOSELECT &&
+			     tdom != AP_QID_QUEUE(zq->queue->qid)))
 				continue;
 			/* check if device node has admission for this queue */
 			if (!zcrypt_check_queue(perms,
-- 
2.20.1

[PATCH AUTOSEL 5.1 45/70] perf namespace: Protect reading thread's namespace

[Sasha Levin]

From: Namhyung Kim <namhyung@kernel.org>

[ Upstream commit 6584140ba9e6762dd7ec73795243289b914f31f9 ]

It seems that the current code lacks holding the namespace lock in
thread__namespaces().  Otherwise it can see inconsistent results.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Link: http://lkml.kernel.org/r/20190522053250.207156-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/thread.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index 50678d318185..b800752745af 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -132,7 +132,7 @@ void thread__put(struct thread *thread)
 	}
 }
 
-struct namespaces *thread__namespaces(const struct thread *thread)
+static struct namespaces *__thread__namespaces(const struct thread *thread)
 {
 	if (list_empty(&thread->namespaces_list))
 		return NULL;
@@ -140,10 +140,21 @@ struct namespaces *thread__namespaces(const struct thread *thread)
 	return list_first_entry(&thread->namespaces_list, struct namespaces, list);
 }
 
+struct namespaces *thread__namespaces(const struct thread *thread)
+{
+	struct namespaces *ns;
+
+	down_read((struct rw_semaphore *)&thread->namespaces_lock);
+	ns = __thread__namespaces(thread);
+	up_read((struct rw_semaphore *)&thread->namespaces_lock);
+
+	return ns;
+}
+
 static int __thread__set_namespaces(struct thread *thread, u64 timestamp,
 				    struct namespaces_event *event)
 {
-	struct namespaces *new, *curr = thread__namespaces(thread);
+	struct namespaces *new, *curr = __thread__namespaces(thread);
 
 	new = namespaces__new(event);
 	if (!new)
-- 
2.20.1

[PATCH AUTOSEL 5.1 46/70] perf record: Fix s390 missing module symbol and warning for non-root users

[Sasha Levin]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit 6738028dd57df064b969d8392c943ef3b3ae705d ]

Command 'perf record' and 'perf report' on a system without kernel
debuginfo packages uses /proc/kallsyms and /proc/modules to find
addresses for kernel and module symbols. On x86 this works for root and
non-root users.

On s390, when invoked as non-root user, many of the following warnings
are shown and module symbols are missing:

    proc/{kallsyms,modules} inconsistency while looking for
        "[sha1_s390]" module!

Command 'perf record' creates a list of module start addresses by
parsing the output of /proc/modules and creates a PERF_RECORD_MMAP
record for the kernel and each module. The following function call
sequence is executed:

  machine__create_kernel_maps
    machine__create_module
      modules__parse
        machine__create_module --> for each line in /proc/modules
          arch__fix_module_text_start

Function arch__fix_module_text_start() is s390 specific. It opens
file /sys/module/<name>/sections/.text to extract the module's .text
section start address. On s390 the module loader prepends a header
before the first section, whereas on x86 the module's text section
address is identical the the module's load address.

However module section files are root readable only. For non-root the
read operation fails and machine__create_module() returns an error.
Command perf record does not generate any PERF_RECORD_MMAP record
for loaded modules. Later command perf report complains about missing
module maps.

To fix this function arch__fix_module_text_start() always returns
success. For root users there is no change, for non-root users
the module's load address is used as module's text start address
(the prepended header then counts as part of the text section).

This enable non-root users to use module symbols and avoid the
warning when perf report is executed.

Output before:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text

Output after:

  [tmricht@m83lp54 perf]$ ./perf report -D | fgrep MMAP
  0 0x168 [0x50]: PERF_RECORD_MMAP ... x [kernel.kallsyms]_text
  0 0x1b8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../autofs4.ko.xz
  0 0x250 [0xa8]: PERF_RECORD_MMAP ... x /lib/modules/.../sha_common.ko.xz
  0 0x2f8 [0x98]: PERF_RECORD_MMAP ... x /lib/modules/.../des_generic.ko.xz

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: http://lkml.kernel.org/r/20190522144601.50763-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/s390/util/machine.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/tools/perf/arch/s390/util/machine.c b/tools/perf/arch/s390/util/machine.c
index 0b2054007314..a19690a17291 100644
--- a/tools/perf/arch/s390/util/machine.c
+++ b/tools/perf/arch/s390/util/machine.c
@@ -5,16 +5,19 @@
 #include "util.h"
 #include "machine.h"
 #include "api/fs/fs.h"
+#include "debug.h"
 
 int arch__fix_module_text_start(u64 *start, const char *name)
 {
+	u64 m_start = *start;
 	char path[PATH_MAX];
 
 	snprintf(path, PATH_MAX, "module/%.*s/sections/.text",
 				(int)strlen(name) - 2, name + 1);
-
-	if (sysfs__read_ull(path, (unsigned long long *)start) < 0)
-		return -1;
+	if (sysfs__read_ull(path, (unsigned long long *)start) < 0) {
+		pr_debug2("Using module %s start:%#lx\n", path, m_start);
+		*start = m_start;
+	}
 
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.1 47/70] ia64: fix build errors by exporting paddr_to_nid()

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 9a626c4a6326da4433a0d4d4a8a7d1571caf1ed3 ]

Fix build errors on ia64 when DISCONTIGMEM=y and NUMA=y by
exporting paddr_to_nid().

Fixes these build errors:

ERROR: "paddr_to_nid" [sound/core/snd-pcm.ko] undefined!
ERROR: "paddr_to_nid" [net/sunrpc/sunrpc.ko] undefined!
ERROR: "paddr_to_nid" [fs/cifs/cifs.ko] undefined!
ERROR: "paddr_to_nid" [drivers/video/fbdev/core/fb.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/mon/usbmon.ko] undefined!
ERROR: "paddr_to_nid" [drivers/usb/core/usbcore.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/raid1.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-crypt.ko] undefined!
ERROR: "paddr_to_nid" [drivers/md/dm-bufio.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-core.ko] undefined!
ERROR: "paddr_to_nid" [drivers/ide/ide-cd_mod.ko] undefined!
ERROR: "paddr_to_nid" [drivers/gpu/drm/drm.ko] undefined!
ERROR: "paddr_to_nid" [drivers/char/agp/agpgart.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/nbd.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/loop.ko] undefined!
ERROR: "paddr_to_nid" [drivers/block/brd.ko] undefined!
ERROR: "paddr_to_nid" [crypto/ccm.ko] undefined!

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/mm/numa.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c
index a03803506b0c..5e1015eb6d0d 100644
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@@ -55,6 +55,7 @@ paddr_to_nid(unsigned long paddr)
 
 	return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0);
 }
+EXPORT_SYMBOL(paddr_to_nid);
 
 #if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA)
 /*
-- 
2.20.1

[PATCH AUTOSEL 5.1 48/70] dpaa_eth: use only online CPU portals

[Sasha Levin]

From: Madalin Bucur <madalin.bucur@nxp.com>

[ Upstream commit 7aae703f8096d21e34ce5f34f16715587bc30902 ]

Make sure only the portals for the online CPUs are used.
Without this change, there are issues when someone boots with
maxcpus=n, with n < actual number of cores available as frames
either received or corresponding to the transmit confirmation
path would be offered for dequeue to the offline CPU portals,
getting lost.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c     | 9 ++++-----
 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 4 ++--
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index d3f2408dc9e8..f38c3fa7d705 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -780,7 +780,7 @@ static void dpaa_eth_add_channel(u16 channel)
 	struct qman_portal *portal;
 	int cpu;
 
-	for_each_cpu(cpu, cpus) {
+	for_each_cpu_and(cpu, cpus, cpu_online_mask) {
 		portal = qman_get_affine_portal(cpu);
 		qman_p_static_dequeue_add(portal, pool);
 	}
@@ -896,7 +896,7 @@ static void dpaa_fq_setup(struct dpaa_priv *priv,
 	u16 channels[NR_CPUS];
 	struct dpaa_fq *fq;
 
-	for_each_cpu(cpu, affine_cpus)
+	for_each_cpu_and(cpu, affine_cpus, cpu_online_mask)
 		channels[num_portals++] = qman_affine_channel(cpu);
 
 	if (num_portals == 0)
@@ -2174,7 +2174,6 @@ static int dpaa_eth_poll(struct napi_struct *napi, int budget)
 	if (cleaned < budget) {
 		napi_complete_done(napi, cleaned);
 		qman_p_irqsource_add(np->p, QM_PIRQ_DQRI);
-
 	} else if (np->down) {
 		qman_p_irqsource_add(np->p, QM_PIRQ_DQRI);
 	}
@@ -2448,7 +2447,7 @@ static void dpaa_eth_napi_enable(struct dpaa_priv *priv)
 	struct dpaa_percpu_priv *percpu_priv;
 	int i;
 
-	for_each_possible_cpu(i) {
+	for_each_online_cpu(i) {
 		percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
 
 		percpu_priv->np.down = 0;
@@ -2461,7 +2460,7 @@ static void dpaa_eth_napi_disable(struct dpaa_priv *priv)
 	struct dpaa_percpu_priv *percpu_priv;
 	int i;
 
-	for_each_possible_cpu(i) {
+	for_each_online_cpu(i) {
 		percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
 
 		percpu_priv->np.down = 1;
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
index bdee441bc3b7..7ce2e99b594d 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -569,7 +569,7 @@ static int dpaa_set_coalesce(struct net_device *dev,
 	qman_dqrr_get_ithresh(portal, &prev_thresh);
 
 	/* set new values */
-	for_each_cpu(cpu, cpus) {
+	for_each_cpu_and(cpu, cpus, cpu_online_mask) {
 		portal = qman_get_affine_portal(cpu);
 		res = qman_portal_set_iperiod(portal, period);
 		if (res)
@@ -586,7 +586,7 @@ static int dpaa_set_coalesce(struct net_device *dev,
 
 revert_values:
 	/* restore previous values */
-	for_each_cpu(cpu, cpus) {
+	for_each_cpu_and(cpu, cpus, cpu_online_mask) {
 		if (!needs_revert[cpu])
 			continue;
 		portal = qman_get_affine_portal(cpu);
-- 
2.20.1

[PATCH AUTOSEL 5.1 49/70] xen/pvcalls: Remove set but not used variable

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 41349672e3cbc2e8349831f21253509c3415aa2b ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/xen/pvcalls-front.c: In function pvcalls_front_sendmsg:
drivers/xen/pvcalls-front.c:543:25: warning: variable bedata set but not used [-Wunused-but-set-variable]
drivers/xen/pvcalls-front.c: In function pvcalls_front_recvmsg:
drivers/xen/pvcalls-front.c:638:25: warning: variable bedata set but not used [-Wunused-but-set-variable]

They are never used since introduction.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/pvcalls-front.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 8a249c95c193..d7438fdc5706 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -540,7 +540,6 @@ out:
 int pvcalls_front_sendmsg(struct socket *sock, struct msghdr *msg,
 			  size_t len)
 {
-	struct pvcalls_bedata *bedata;
 	struct sock_mapping *map;
 	int sent, tot_sent = 0;
 	int count = 0, flags;
@@ -552,7 +551,6 @@ int pvcalls_front_sendmsg(struct socket *sock, struct msghdr *msg,
 	map = pvcalls_enter_sock(sock);
 	if (IS_ERR(map))
 		return PTR_ERR(map);
-	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
 
 	mutex_lock(&map->active.out_mutex);
 	if ((flags & MSG_DONTWAIT) && !pvcalls_front_write_todo(map)) {
@@ -635,7 +633,6 @@ out:
 int pvcalls_front_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 		     int flags)
 {
-	struct pvcalls_bedata *bedata;
 	int ret;
 	struct sock_mapping *map;
 
@@ -645,7 +642,6 @@ int pvcalls_front_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 	map = pvcalls_enter_sock(sock);
 	if (IS_ERR(map))
 		return PTR_ERR(map);
-	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
 
 	mutex_lock(&map->active.in_mutex);
 	if (len > XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER))
-- 
2.20.1

[PATCH AUTOSEL 5.1 50/70] xenbus: Avoid deadlock during suspend due to open transactions

[Sasha Levin]

From: Ross Lagerwall <ross.lagerwall@citrix.com>

[ Upstream commit d10e0cc113c9e1b64b5c6e3db37b5c839794f3df ]

During a suspend/resume, the xenwatch thread waits for all outstanding
xenstore requests and transactions to complete. This does not work
correctly for transactions started by userspace because it waits for
them to complete after freezing userspace threads which means the
transactions have no way of completing, resulting in a deadlock. This is
trivial to reproduce by running this script and then suspending the VM:

    import pyxs, time
    c = pyxs.client.Client(xen_bus_path="/dev/xen/xenbus")
    c.connect()
    c.transaction()
    time.sleep(3600)

Even if this deadlock were resolved, misbehaving userspace should not
prevent a VM from being migrated. So, instead of waiting for these
transactions to complete before suspending, store the current generation
id for each transaction when it is started. The global generation id is
incremented during resume. If the caller commits the transaction and the
generation id does not match the current generation id, return EAGAIN so
that they try again. If the transaction was instead discarded, return OK
since no changes were made anyway.

This only affects users of the xenbus file interface. In-kernel users of
xenbus are assumed to be well-behaved and complete all transactions
before freezing.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/xenbus/xenbus.h              |  3 +++
 drivers/xen/xenbus/xenbus_dev_frontend.c | 18 ++++++++++++++++++
 drivers/xen/xenbus/xenbus_xs.c           |  7 +++++--
 3 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/xenbus/xenbus.h b/drivers/xen/xenbus/xenbus.h
index 092981171df1..d75a2385b37c 100644
--- a/drivers/xen/xenbus/xenbus.h
+++ b/drivers/xen/xenbus/xenbus.h
@@ -83,6 +83,7 @@ struct xb_req_data {
 	int num_vecs;
 	int err;
 	enum xb_req_state state;
+	bool user_req;
 	void (*cb)(struct xb_req_data *);
 	void *par;
 };
@@ -133,4 +134,6 @@ void xenbus_ring_ops_init(void);
 int xenbus_dev_request_and_reply(struct xsd_sockmsg *msg, void *par);
 void xenbus_dev_queue_reply(struct xb_req_data *req);
 
+extern unsigned int xb_dev_generation_id;
+
 #endif
diff --git a/drivers/xen/xenbus/xenbus_dev_frontend.c b/drivers/xen/xenbus/xenbus_dev_frontend.c
index 0782ff3c2273..39c63152a358 100644
--- a/drivers/xen/xenbus/xenbus_dev_frontend.c
+++ b/drivers/xen/xenbus/xenbus_dev_frontend.c
@@ -62,6 +62,8 @@
 
 #include "xenbus.h"
 
+unsigned int xb_dev_generation_id;
+
 /*
  * An element of a list of outstanding transactions, for which we're
  * still waiting a reply.
@@ -69,6 +71,7 @@
 struct xenbus_transaction_holder {
 	struct list_head list;
 	struct xenbus_transaction handle;
+	unsigned int generation_id;
 };
 
 /*
@@ -441,6 +444,7 @@ static int xenbus_write_transaction(unsigned msg_type,
 			rc = -ENOMEM;
 			goto out;
 		}
+		trans->generation_id = xb_dev_generation_id;
 		list_add(&trans->list, &u->transactions);
 	} else if (msg->hdr.tx_id != 0 &&
 		   !xenbus_get_transaction(u, msg->hdr.tx_id))
@@ -449,6 +453,20 @@ static int xenbus_write_transaction(unsigned msg_type,
 		 !(msg->hdr.len == 2 &&
 		   (!strcmp(msg->body, "T") || !strcmp(msg->body, "F"))))
 		return xenbus_command_reply(u, XS_ERROR, "EINVAL");
+	else if (msg_type == XS_TRANSACTION_END) {
+		trans = xenbus_get_transaction(u, msg->hdr.tx_id);
+		if (trans && trans->generation_id != xb_dev_generation_id) {
+			list_del(&trans->list);
+			kfree(trans);
+			if (!strcmp(msg->body, "T"))
+				return xenbus_command_reply(u, XS_ERROR,
+							    "EAGAIN");
+			else
+				return xenbus_command_reply(u,
+							    XS_TRANSACTION_END,
+							    "OK");
+		}
+	}
 
 	rc = xenbus_dev_request_and_reply(&msg->hdr, u);
 	if (rc && trans) {
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index 49a3874ae6bb..ddc18da61834 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -105,6 +105,7 @@ static void xs_suspend_enter(void)
 
 static void xs_suspend_exit(void)
 {
+	xb_dev_generation_id++;
 	spin_lock(&xs_state_lock);
 	xs_suspend_active--;
 	spin_unlock(&xs_state_lock);
@@ -125,7 +126,7 @@ static uint32_t xs_request_enter(struct xb_req_data *req)
 		spin_lock(&xs_state_lock);
 	}
 
-	if (req->type == XS_TRANSACTION_START)
+	if (req->type == XS_TRANSACTION_START && !req->user_req)
 		xs_state_users++;
 	xs_state_users++;
 	rq_id = xs_request_id++;
@@ -140,7 +141,7 @@ void xs_request_exit(struct xb_req_data *req)
 	spin_lock(&xs_state_lock);
 	xs_state_users--;
 	if ((req->type == XS_TRANSACTION_START && req->msg.type == XS_ERROR) ||
-	    (req->type == XS_TRANSACTION_END &&
+	    (req->type == XS_TRANSACTION_END && !req->user_req &&
 	     !WARN_ON_ONCE(req->msg.type == XS_ERROR &&
 			   !strcmp(req->body, "ENOENT"))))
 		xs_state_users--;
@@ -286,6 +287,7 @@ int xenbus_dev_request_and_reply(struct xsd_sockmsg *msg, void *par)
 	req->num_vecs = 1;
 	req->cb = xenbus_dev_queue_reply;
 	req->par = par;
+	req->user_req = true;
 
 	xs_send(req, msg);
 
@@ -313,6 +315,7 @@ static void *xs_talkv(struct xenbus_transaction t,
 	req->vec = iovec;
 	req->num_vecs = num_vecs;
 	req->cb = xs_wake_up;
+	req->user_req = false;
 
 	msg.req_id = 0;
 	msg.tx_id = t.id;
-- 
2.20.1

[PATCH AUTOSEL 5.1 51/70] dfs_cache: fix a wrong use of kfree in flush_cache_ent()

[Sasha Levin]

From: Gen Zhang <blackgod016574@gmail.com>

[ Upstream commit 50fbc13dc12666f3604dc2555a47fc8c4e29162b ]

In flush_cache_ent(), 'ce->ce_path' is allocated by kstrdup_const().
It should be freed by kfree_const(), rather than kfree().

Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/dfs_cache.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/dfs_cache.c b/fs/cifs/dfs_cache.c
index 09b7d0d4f6e4..007cfa39be5f 100644
--- a/fs/cifs/dfs_cache.c
+++ b/fs/cifs/dfs_cache.c
@@ -131,7 +131,7 @@ static inline void flush_cache_ent(struct dfs_cache_entry *ce)
 		return;
 
 	hlist_del_init_rcu(&ce->ce_hlist);
-	kfree(ce->ce_path);
+	kfree_const(ce->ce_path);
 	free_tgts(ce);
 	dfs_cache_count--;
 	call_rcu(&ce->ce_rcu, free_cache_entry);
@@ -421,7 +421,7 @@ alloc_cache_entry(const char *path, const struct dfs_info3_param *refs,
 
 	rc = copy_ref_data(refs, numrefs, ce, NULL);
 	if (rc) {
-		kfree(ce->ce_path);
+		kfree_const(ce->ce_path);
 		kmem_cache_free(dfs_cache_slab, ce);
 		ce = ERR_PTR(rc);
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.1 52/70] KVM: PPC: Book3S HV: Use new mutex to synchronize MMU setup

[Sasha Levin]

From: Paul Mackerras <paulus@ozlabs.org>

[ Upstream commit 0d4ee88d92884c661fcafd5576da243aa943dc24 ]

Currently the HV KVM code uses kvm->lock in conjunction with a flag,
kvm->arch.mmu_ready, to synchronize MMU setup and hold off vcpu
execution until the MMU-related data structures are ready.  However,
this means that kvm->lock is being taken inside vcpu->mutex, which
is contrary to Documentation/virtual/kvm/locking.txt and results in
lockdep warnings.

To fix this, we add a new mutex, kvm->arch.mmu_setup_lock, which nests
inside the vcpu mutexes, and is taken in the places where kvm->lock
was taken that are related to MMU setup.

Additionally we take the new mutex in the vcpu creation code at the
point where we are creating a new vcore, in order to provide mutual
exclusion with kvmppc_update_lpcr() and ensure that an update to
kvm->arch.lpcr doesn't get missed, which could otherwise lead to a
stale vcore->lpcr value.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/kvm_host.h |  1 +
 arch/powerpc/kvm/book3s_64_mmu_hv.c | 36 ++++++++++++++---------------
 arch/powerpc/kvm/book3s_hv.c        | 31 ++++++++++++++++++-------
 3 files changed, 42 insertions(+), 26 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index e6b5bb012ccb..8d3658275a34 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -317,6 +317,7 @@ struct kvm_arch {
 #endif
 	struct kvmppc_ops *kvm_ops;
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+	struct mutex mmu_setup_lock;	/* nests inside vcpu mutexes */
 	u64 l1_ptcr;
 	int max_nested_lpid;
 	struct kvm_nested_guest *nested_guests[KVM_MAX_NESTED_GUESTS];
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index be7bc070eae5..c1ced22455f9 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -63,7 +63,7 @@ struct kvm_resize_hpt {
 	struct work_struct work;
 	u32 order;
 
-	/* These fields protected by kvm->lock */
+	/* These fields protected by kvm->arch.mmu_setup_lock */
 
 	/* Possible values and their usage:
 	 *  <0     an error occurred during allocation,
@@ -73,7 +73,7 @@ struct kvm_resize_hpt {
 	int error;
 
 	/* Private to the work thread, until error != -EBUSY,
-	 * then protected by kvm->lock.
+	 * then protected by kvm->arch.mmu_setup_lock.
 	 */
 	struct kvm_hpt_info hpt;
 };
@@ -139,7 +139,7 @@ long kvmppc_alloc_reset_hpt(struct kvm *kvm, int order)
 	long err = -EBUSY;
 	struct kvm_hpt_info info;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.mmu_setup_lock);
 	if (kvm->arch.mmu_ready) {
 		kvm->arch.mmu_ready = 0;
 		/* order mmu_ready vs. vcpus_running */
@@ -183,7 +183,7 @@ out:
 		/* Ensure that each vcpu will flush its TLB on next entry. */
 		cpumask_setall(&kvm->arch.need_tlb_flush);
 
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.mmu_setup_lock);
 	return err;
 }
 
@@ -1447,7 +1447,7 @@ static void resize_hpt_pivot(struct kvm_resize_hpt *resize)
 
 static void resize_hpt_release(struct kvm *kvm, struct kvm_resize_hpt *resize)
 {
-	if (WARN_ON(!mutex_is_locked(&kvm->lock)))
+	if (WARN_ON(!mutex_is_locked(&kvm->arch.mmu_setup_lock)))
 		return;
 
 	if (!resize)
@@ -1474,14 +1474,14 @@ static void resize_hpt_prepare_work(struct work_struct *work)
 	if (WARN_ON(resize->error != -EBUSY))
 		return;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.mmu_setup_lock);
 
 	/* Request is still current? */
 	if (kvm->arch.resize_hpt == resize) {
 		/* We may request large allocations here:
-		 * do not sleep with kvm->lock held for a while.
+		 * do not sleep with kvm->arch.mmu_setup_lock held for a while.
 		 */
-		mutex_unlock(&kvm->lock);
+		mutex_unlock(&kvm->arch.mmu_setup_lock);
 
 		resize_hpt_debug(resize, "resize_hpt_prepare_work(): order = %d\n",
 				 resize->order);
@@ -1494,9 +1494,9 @@ static void resize_hpt_prepare_work(struct work_struct *work)
 		if (WARN_ON(err == -EBUSY))
 			err = -EINPROGRESS;
 
-		mutex_lock(&kvm->lock);
+		mutex_lock(&kvm->arch.mmu_setup_lock);
 		/* It is possible that kvm->arch.resize_hpt != resize
-		 * after we grab kvm->lock again.
+		 * after we grab kvm->arch.mmu_setup_lock again.
 		 */
 	}
 
@@ -1505,7 +1505,7 @@ static void resize_hpt_prepare_work(struct work_struct *work)
 	if (kvm->arch.resize_hpt != resize)
 		resize_hpt_release(kvm, resize);
 
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.mmu_setup_lock);
 }
 
 long kvm_vm_ioctl_resize_hpt_prepare(struct kvm *kvm,
@@ -1522,7 +1522,7 @@ long kvm_vm_ioctl_resize_hpt_prepare(struct kvm *kvm,
 	if (shift && ((shift < 18) || (shift > 46)))
 		return -EINVAL;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.mmu_setup_lock);
 
 	resize = kvm->arch.resize_hpt;
 
@@ -1565,7 +1565,7 @@ long kvm_vm_ioctl_resize_hpt_prepare(struct kvm *kvm,
 	ret = 100; /* estimated time in ms */
 
 out:
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.mmu_setup_lock);
 	return ret;
 }
 
@@ -1588,7 +1588,7 @@ long kvm_vm_ioctl_resize_hpt_commit(struct kvm *kvm,
 	if (shift && ((shift < 18) || (shift > 46)))
 		return -EINVAL;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.mmu_setup_lock);
 
 	resize = kvm->arch.resize_hpt;
 
@@ -1625,7 +1625,7 @@ out:
 	smp_mb();
 out_no_hpt:
 	resize_hpt_release(kvm, resize);
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.mmu_setup_lock);
 	return ret;
 }
 
@@ -1868,7 +1868,7 @@ static ssize_t kvm_htab_write(struct file *file, const char __user *buf,
 		return -EINVAL;
 
 	/* lock out vcpus from running while we're doing this */
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.mmu_setup_lock);
 	mmu_ready = kvm->arch.mmu_ready;
 	if (mmu_ready) {
 		kvm->arch.mmu_ready = 0;	/* temporarily */
@@ -1876,7 +1876,7 @@ static ssize_t kvm_htab_write(struct file *file, const char __user *buf,
 		smp_mb();
 		if (atomic_read(&kvm->arch.vcpus_running)) {
 			kvm->arch.mmu_ready = 1;
-			mutex_unlock(&kvm->lock);
+			mutex_unlock(&kvm->arch.mmu_setup_lock);
 			return -EBUSY;
 		}
 	}
@@ -1963,7 +1963,7 @@ static ssize_t kvm_htab_write(struct file *file, const char __user *buf,
 	/* Order HPTE updates vs. mmu_ready */
 	smp_wmb();
 	kvm->arch.mmu_ready = mmu_ready;
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.mmu_setup_lock);
 
 	if (err)
 		return err;
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index b2b29d4f9842..4519c55ba19d 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2257,11 +2257,17 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
 			pr_devel("KVM: collision on id %u", id);
 			vcore = NULL;
 		} else if (!vcore) {
+			/*
+			 * Take mmu_setup_lock for mutual exclusion
+			 * with kvmppc_update_lpcr().
+			 */
 			err = -ENOMEM;
 			vcore = kvmppc_vcore_create(kvm,
 					id & ~(kvm->arch.smt_mode - 1));
+			mutex_lock(&kvm->arch.mmu_setup_lock);
 			kvm->arch.vcores[core] = vcore;
 			kvm->arch.online_vcores++;
+			mutex_unlock(&kvm->arch.mmu_setup_lock);
 		}
 	}
 	mutex_unlock(&kvm->lock);
@@ -3820,7 +3826,7 @@ static int kvmhv_setup_mmu(struct kvm_vcpu *vcpu)
 	int r = 0;
 	struct kvm *kvm = vcpu->kvm;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.mmu_setup_lock);
 	if (!kvm->arch.mmu_ready) {
 		if (!kvm_is_radix(kvm))
 			r = kvmppc_hv_setup_htab_rma(vcpu);
@@ -3830,7 +3836,7 @@ static int kvmhv_setup_mmu(struct kvm_vcpu *vcpu)
 			kvm->arch.mmu_ready = 1;
 		}
 	}
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.mmu_setup_lock);
 	return r;
 }
 
@@ -4435,7 +4441,8 @@ static void kvmppc_core_commit_memory_region_hv(struct kvm *kvm,
 
 /*
  * Update LPCR values in kvm->arch and in vcores.
- * Caller must hold kvm->lock.
+ * Caller must hold kvm->arch.mmu_setup_lock (for mutual exclusion
+ * of kvm->arch.lpcr update).
  */
 void kvmppc_update_lpcr(struct kvm *kvm, unsigned long lpcr, unsigned long mask)
 {
@@ -4487,7 +4494,7 @@ void kvmppc_setup_partition_table(struct kvm *kvm)
 
 /*
  * Set up HPT (hashed page table) and RMA (real-mode area).
- * Must be called with kvm->lock held.
+ * Must be called with kvm->arch.mmu_setup_lock held.
  */
 static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
 {
@@ -4575,7 +4582,10 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
 	goto out_srcu;
 }
 
-/* Must be called with kvm->lock held and mmu_ready = 0 and no vcpus running */
+/*
+ * Must be called with kvm->arch.mmu_setup_lock held and
+ * mmu_ready = 0 and no vcpus running.
+ */
 int kvmppc_switch_mmu_to_hpt(struct kvm *kvm)
 {
 	if (nesting_enabled(kvm))
@@ -4592,7 +4602,10 @@ int kvmppc_switch_mmu_to_hpt(struct kvm *kvm)
 	return 0;
 }
 
-/* Must be called with kvm->lock held and mmu_ready = 0 and no vcpus running */
+/*
+ * Must be called with kvm->arch.mmu_setup_lock held and
+ * mmu_ready = 0 and no vcpus running.
+ */
 int kvmppc_switch_mmu_to_radix(struct kvm *kvm)
 {
 	int err;
@@ -4697,6 +4710,8 @@ static int kvmppc_core_init_vm_hv(struct kvm *kvm)
 	char buf[32];
 	int ret;
 
+	mutex_init(&kvm->arch.mmu_setup_lock);
+
 	/* Allocate the guest's logical partition ID */
 
 	lpid = kvmppc_alloc_lpid();
@@ -5222,7 +5237,7 @@ static int kvmhv_configure_mmu(struct kvm *kvm, struct kvm_ppc_mmuv3_cfg *cfg)
 	if (kvmhv_on_pseries() && !radix)
 		return -EINVAL;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.mmu_setup_lock);
 	if (radix != kvm_is_radix(kvm)) {
 		if (kvm->arch.mmu_ready) {
 			kvm->arch.mmu_ready = 0;
@@ -5250,7 +5265,7 @@ static int kvmhv_configure_mmu(struct kvm *kvm, struct kvm_ppc_mmuv3_cfg *cfg)
 	err = 0;
 
  out_unlock:
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.mmu_setup_lock);
 	return err;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 53/70] KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list

[Sasha Levin]

From: Paul Mackerras <paulus@ozlabs.org>

[ Upstream commit 1659e27d2bc1ef47b6d031abe01b467f18cb72d9 ]

Currently the Book 3S KVM code uses kvm->lock to synchronize access
to the kvm->arch.rtas_tokens list.  Because this list is scanned
inside kvmppc_rtas_hcall(), which is called with the vcpu mutex held,
taking kvm->lock cause a lock inversion problem, which could lead to
a deadlock.

To fix this, we add a new mutex, kvm->arch.rtas_token_lock, which nests
inside the vcpu mutexes, and use that instead of kvm->lock when
accessing the rtas token list.

This removes the lockdep_assert_held() in kvmppc_rtas_tokens_free().
At this point we don't hold the new mutex, but that is OK because
kvmppc_rtas_tokens_free() is only called when the whole VM is being
destroyed, and at that point nothing can be looking up a token in
the list.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/kvm_host.h |  1 +
 arch/powerpc/kvm/book3s.c           |  1 +
 arch/powerpc/kvm/book3s_rtas.c      | 14 ++++++--------
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 8d3658275a34..1f9eb75ce95a 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -305,6 +305,7 @@ struct kvm_arch {
 #ifdef CONFIG_PPC_BOOK3S_64
 	struct list_head spapr_tce_tables;
 	struct list_head rtas_tokens;
+	struct mutex rtas_token_lock;
 	DECLARE_BITMAP(enabled_hcalls, MAX_HCALL_OPCODE/4 + 1);
 #endif
 #ifdef CONFIG_KVM_MPIC
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 10c5579d20ce..020304403bae 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -878,6 +878,7 @@ int kvmppc_core_init_vm(struct kvm *kvm)
 #ifdef CONFIG_PPC64
 	INIT_LIST_HEAD_RCU(&kvm->arch.spapr_tce_tables);
 	INIT_LIST_HEAD(&kvm->arch.rtas_tokens);
+	mutex_init(&kvm->arch.rtas_token_lock);
 #endif
 
 	return kvm->arch.kvm_ops->init_vm(kvm);
diff --git a/arch/powerpc/kvm/book3s_rtas.c b/arch/powerpc/kvm/book3s_rtas.c
index 4e178c4c1ea5..b7ae3dfbf00e 100644
--- a/arch/powerpc/kvm/book3s_rtas.c
+++ b/arch/powerpc/kvm/book3s_rtas.c
@@ -146,7 +146,7 @@ static int rtas_token_undefine(struct kvm *kvm, char *name)
 {
 	struct rtas_token_definition *d, *tmp;
 
-	lockdep_assert_held(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.rtas_token_lock);
 
 	list_for_each_entry_safe(d, tmp, &kvm->arch.rtas_tokens, list) {
 		if (rtas_name_matches(d->handler->name, name)) {
@@ -167,7 +167,7 @@ static int rtas_token_define(struct kvm *kvm, char *name, u64 token)
 	bool found;
 	int i;
 
-	lockdep_assert_held(&kvm->lock);
+	lockdep_assert_held(&kvm->arch.rtas_token_lock);
 
 	list_for_each_entry(d, &kvm->arch.rtas_tokens, list) {
 		if (d->token == token)
@@ -206,14 +206,14 @@ int kvm_vm_ioctl_rtas_define_token(struct kvm *kvm, void __user *argp)
 	if (copy_from_user(&args, argp, sizeof(args)))
 		return -EFAULT;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.rtas_token_lock);
 
 	if (args.token)
 		rc = rtas_token_define(kvm, args.name, args.token);
 	else
 		rc = rtas_token_undefine(kvm, args.name);
 
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->arch.rtas_token_lock);
 
 	return rc;
 }
@@ -245,7 +245,7 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 	orig_rets = args.rets;
 	args.rets = &args.args[be32_to_cpu(args.nargs)];
 
-	mutex_lock(&vcpu->kvm->lock);
+	mutex_lock(&vcpu->kvm->arch.rtas_token_lock);
 
 	rc = -ENOENT;
 	list_for_each_entry(d, &vcpu->kvm->arch.rtas_tokens, list) {
@@ -256,7 +256,7 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu)
 		}
 	}
 
-	mutex_unlock(&vcpu->kvm->lock);
+	mutex_unlock(&vcpu->kvm->arch.rtas_token_lock);
 
 	if (rc == 0) {
 		args.rets = orig_rets;
@@ -282,8 +282,6 @@ void kvmppc_rtas_tokens_free(struct kvm *kvm)
 {
 	struct rtas_token_definition *d, *tmp;
 
-	lockdep_assert_held(&kvm->lock);
-
 	list_for_each_entry_safe(d, tmp, &kvm->arch.rtas_tokens, list) {
 		list_del(&d->list);
 		kfree(d);
-- 
2.20.1

[PATCH AUTOSEL 5.1 54/70] KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu

[Sasha Levin]

From: Paul Mackerras <paulus@ozlabs.org>

[ Upstream commit 5a3f49364c3ffa1107bd88f8292406e98c5d206c ]

Currently the HV KVM code takes the kvm->lock around calls to
kvm_for_each_vcpu() and kvm_get_vcpu_by_id() (which can call
kvm_for_each_vcpu() internally).  However, that leads to a lock
order inversion problem, because these are called in contexts where
the vcpu mutex is held, but the vcpu mutexes nest within kvm->lock
according to Documentation/virtual/kvm/locking.txt.  Hence there
is a possibility of deadlock.

To fix this, we simply don't take the kvm->lock mutex around these
calls.  This is safe because the implementations of kvm_for_each_vcpu()
and kvm_get_vcpu_by_id() have been designed to be able to be called
locklessly.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 4519c55ba19d..bea595c94cfc 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -445,12 +445,7 @@ static void kvmppc_dump_regs(struct kvm_vcpu *vcpu)
 
 static struct kvm_vcpu *kvmppc_find_vcpu(struct kvm *kvm, int id)
 {
-	struct kvm_vcpu *ret;
-
-	mutex_lock(&kvm->lock);
-	ret = kvm_get_vcpu_by_id(kvm, id);
-	mutex_unlock(&kvm->lock);
-	return ret;
+	return kvm_get_vcpu_by_id(kvm, id);
 }
 
 static void init_vpa(struct kvm_vcpu *vcpu, struct lppaca *vpa)
@@ -1502,7 +1497,6 @@ static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr,
 	struct kvmppc_vcore *vc = vcpu->arch.vcore;
 	u64 mask;
 
-	mutex_lock(&kvm->lock);
 	spin_lock(&vc->lock);
 	/*
 	 * If ILE (interrupt little-endian) has changed, update the
@@ -1542,7 +1536,6 @@ static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr,
 		mask &= 0xFFFFFFFF;
 	vc->lpcr = (vc->lpcr & ~mask) | (new_lpcr & mask);
 	spin_unlock(&vc->lock);
-	mutex_unlock(&kvm->lock);
 }
 
 static int kvmppc_get_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
-- 
2.20.1

[PATCH AUTOSEL 5.1 55/70] ALSA: fireface: Use ULL suffixes for 64-bit constants

[Sasha Levin]

From: Geert Uytterhoeven <geert@linux-m68k.org>

[ Upstream commit 6954158a16404e7091cea494cd0a435ca2f90388 ]

With gcc 4.1:

    sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_switch_fetching_mode’:
    sound/firewire/fireface/ff-protocol-latter.c:97: warning: integer constant is too large for ‘long’ type
    sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_begin_session’:
    sound/firewire/fireface/ff-protocol-latter.c:170: warning: integer constant is too large for ‘long’ type
    sound/firewire/fireface/ff-protocol-latter.c:197: warning: integer constant is too large for ‘long’ type
    sound/firewire/fireface/ff-protocol-latter.c:205: warning: integer constant is too large for ‘long’ type
    sound/firewire/fireface/ff-protocol-latter.c: In function ‘latter_finish_session’:
    sound/firewire/fireface/ff-protocol-latter.c:214: warning: integer constant is too large for ‘long’ type

Fix this by adding the missing "ULL" suffixes.
Add the same suffix to the last constant, to maintain consistency.

Fixes: fd1cc9de64c2ca6c ("ALSA: fireface: add support for Fireface UCX")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/firewire/fireface/ff-protocol-latter.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/firewire/fireface/ff-protocol-latter.c b/sound/firewire/fireface/ff-protocol-latter.c
index c8236ff89b7f..b30d02d359b1 100644
--- a/sound/firewire/fireface/ff-protocol-latter.c
+++ b/sound/firewire/fireface/ff-protocol-latter.c
@@ -9,11 +9,11 @@
 
 #include "ff.h"
 
-#define LATTER_STF		0xffff00000004
-#define LATTER_ISOC_CHANNELS	0xffff00000008
-#define LATTER_ISOC_START	0xffff0000000c
-#define LATTER_FETCH_MODE	0xffff00000010
-#define LATTER_SYNC_STATUS	0x0000801c0000
+#define LATTER_STF		0xffff00000004ULL
+#define LATTER_ISOC_CHANNELS	0xffff00000008ULL
+#define LATTER_ISOC_START	0xffff0000000cULL
+#define LATTER_FETCH_MODE	0xffff00000010ULL
+#define LATTER_SYNC_STATUS	0x0000801c0000ULL
 
 static int parse_clock_bits(u32 data, unsigned int *rate,
 			    enum snd_ff_clock_src *src)
-- 
2.20.1

[PATCH AUTOSEL 5.1 56/70] arm64: fix syscall_fn_t type

[Sasha Levin]

From: Sami Tolvanen <samitolvanen@google.com>

[ Upstream commit 8ef8f368ce72b5e17f7c1f1ef15c38dcfd0fef64 ]

Syscall wrappers in <asm/syscall_wrapper.h> use const struct pt_regs *
as the argument type. Use const in syscall_fn_t as well to fix indirect
call type mismatches with Control-Flow Integrity checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/syscall.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index a179df3674a1..6206ab9bfcfc 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -20,7 +20,7 @@
 #include <linux/compat.h>
 #include <linux/err.h>
 
-typedef long (*syscall_fn_t)(struct pt_regs *regs);
+typedef long (*syscall_fn_t)(const struct pt_regs *regs);
 
 extern const syscall_fn_t sys_call_table[];
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 57/70] arm64: use the correct function type in SYSCALL_DEFINE0

[Sasha Levin]

From: Sami Tolvanen <samitolvanen@google.com>

[ Upstream commit 0e358bd7b7ebd27e491dabed938eae254c17fe3b ]

Although a syscall defined using SYSCALL_DEFINE0 doesn't accept
parameters, use the correct function type to avoid indirect call
type mismatches with Control-Flow Integrity checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/syscall_wrapper.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/include/asm/syscall_wrapper.h b/arch/arm64/include/asm/syscall_wrapper.h
index a4477e515b79..507d0ee6bc69 100644
--- a/arch/arm64/include/asm/syscall_wrapper.h
+++ b/arch/arm64/include/asm/syscall_wrapper.h
@@ -30,10 +30,10 @@
 	}										\
 	static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))
 
-#define COMPAT_SYSCALL_DEFINE0(sname)					\
-	asmlinkage long __arm64_compat_sys_##sname(void);		\
-	ALLOW_ERROR_INJECTION(__arm64_compat_sys_##sname, ERRNO);	\
-	asmlinkage long __arm64_compat_sys_##sname(void)
+#define COMPAT_SYSCALL_DEFINE0(sname)							\
+	asmlinkage long __arm64_compat_sys_##sname(const struct pt_regs *__unused);	\
+	ALLOW_ERROR_INJECTION(__arm64_compat_sys_##sname, ERRNO);			\
+	asmlinkage long __arm64_compat_sys_##sname(const struct pt_regs *__unused)
 
 #define COND_SYSCALL_COMPAT(name) \
 	cond_syscall(__arm64_compat_sys_##name);
@@ -62,11 +62,11 @@
 	static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))
 
 #ifndef SYSCALL_DEFINE0
-#define SYSCALL_DEFINE0(sname)					\
-	SYSCALL_METADATA(_##sname, 0);				\
-	asmlinkage long __arm64_sys_##sname(void);		\
-	ALLOW_ERROR_INJECTION(__arm64_sys_##sname, ERRNO);	\
-	asmlinkage long __arm64_sys_##sname(void)
+#define SYSCALL_DEFINE0(sname)							\
+	SYSCALL_METADATA(_##sname, 0);						\
+	asmlinkage long __arm64_sys_##sname(const struct pt_regs *__unused);	\
+	ALLOW_ERROR_INJECTION(__arm64_sys_##sname, ERRNO);			\
+	asmlinkage long __arm64_sys_##sname(const struct pt_regs *__unused)
 #endif
 
 #ifndef COND_SYSCALL
-- 
2.20.1

[PATCH AUTOSEL 5.1 58/70] arm64: use the correct function type for __arm64_sys_ni_syscall

[Sasha Levin]

From: Sami Tolvanen <samitolvanen@google.com>

[ Upstream commit 1e29ab3186e33c77dbb2d7566172a205b59fa390 ]

Calling sys_ni_syscall through a syscall_fn_t pointer trips indirect
call Control-Flow Integrity checking due to a function type
mismatch. Use SYSCALL_DEFINE0 for __arm64_sys_ni_syscall instead and
remove the now unnecessary casts.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/sys.c   | 14 +++++++++-----
 arch/arm64/kernel/sys32.c |  7 ++-----
 2 files changed, 11 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/kernel/sys.c b/arch/arm64/kernel/sys.c
index 6f91e8116514..d8b35cfe5e94 100644
--- a/arch/arm64/kernel/sys.c
+++ b/arch/arm64/kernel/sys.c
@@ -47,22 +47,26 @@ SYSCALL_DEFINE1(arm64_personality, unsigned int, personality)
 	return ksys_personality(personality);
 }
 
+asmlinkage long sys_ni_syscall(void);
+
+asmlinkage long __arm64_sys_ni_syscall(const struct pt_regs *__unused)
+{
+	return sys_ni_syscall();
+}
+
 /*
  * Wrappers to pass the pt_regs argument.
  */
 #define sys_personality		sys_arm64_personality
 
-asmlinkage long sys_ni_syscall(const struct pt_regs *);
-#define __arm64_sys_ni_syscall	sys_ni_syscall
-
 #undef __SYSCALL
 #define __SYSCALL(nr, sym)	asmlinkage long __arm64_##sym(const struct pt_regs *);
 #include <asm/unistd.h>
 
 #undef __SYSCALL
-#define __SYSCALL(nr, sym)	[nr] = (syscall_fn_t)__arm64_##sym,
+#define __SYSCALL(nr, sym)	[nr] = __arm64_##sym,
 
 const syscall_fn_t sys_call_table[__NR_syscalls] = {
-	[0 ... __NR_syscalls - 1] = (syscall_fn_t)sys_ni_syscall,
+	[0 ... __NR_syscalls - 1] = __arm64_sys_ni_syscall,
 #include <asm/unistd.h>
 };
diff --git a/arch/arm64/kernel/sys32.c b/arch/arm64/kernel/sys32.c
index 0f8bcb7de700..3c80a40c1c9d 100644
--- a/arch/arm64/kernel/sys32.c
+++ b/arch/arm64/kernel/sys32.c
@@ -133,17 +133,14 @@ COMPAT_SYSCALL_DEFINE6(aarch32_fallocate, int, fd, int, mode,
 	return ksys_fallocate(fd, mode, arg_u64(offset), arg_u64(len));
 }
 
-asmlinkage long sys_ni_syscall(const struct pt_regs *);
-#define __arm64_sys_ni_syscall	sys_ni_syscall
-
 #undef __SYSCALL
 #define __SYSCALL(nr, sym)	asmlinkage long __arm64_##sym(const struct pt_regs *);
 #include <asm/unistd32.h>
 
 #undef __SYSCALL
-#define __SYSCALL(nr, sym)	[nr] = (syscall_fn_t)__arm64_##sym,
+#define __SYSCALL(nr, sym)	[nr] = __arm64_##sym,
 
 const syscall_fn_t compat_sys_call_table[__NR_compat_syscalls] = {
-	[0 ... __NR_compat_syscalls - 1] = (syscall_fn_t)sys_ni_syscall,
+	[0 ... __NR_compat_syscalls - 1] = __arm64_sys_ni_syscall,
 #include <asm/unistd32.h>
 };
-- 
2.20.1

[PATCH AUTOSEL 5.1 59/70] net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit 315ca92dd863fecbffc0bb52ae0ac11e0398726a ]

The sh_eth_close() resets the MAC and then calls phy_stop()
so that mdio read access result is incorrect without any error
according to kernel trace like below:

ifconfig-216   [003] .n..   109.133124: mdio_access: ee700000.ethernet-ffffffff read  phy:0x01 reg:0x00 val:0xffff

According to the hardware manual, the RMII mode should be set to 1
before operation the Ethernet MAC. However, the previous code was not
set to 1 after the driver issued the soft_reset in sh_eth_dev_exit()
so that the mdio read access result seemed incorrect. To fix the issue,
this patch adds a condition and set the RMII mode register in
sh_eth_dev_exit() for R-Car Gen2 and RZ/A1 SoCs.

Note that when I have tried to move the sh_eth_dev_exit() calling
after phy_stop() on sh_eth_close(), but it gets worse (kernel panic
happened and it seems that a register is accessed while the clock is
off).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/renesas/sh_eth.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index e33af371b169..48967dd27bbf 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1594,6 +1594,10 @@ static void sh_eth_dev_exit(struct net_device *ndev)
 	sh_eth_get_stats(ndev);
 	mdp->cd->soft_reset(ndev);
 
+	/* Set the RMII mode again if required */
+	if (mdp->cd->rmiimode)
+		sh_eth_write(ndev, 0x1, RMIIMODE);
+
 	/* Set MAC address again */
 	update_mac_address(ndev);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.1 60/70] blk-mq: Fix memory leak in error handling

[Sasha Levin]

From: Jes Sorensen <jsorensen@fb.com>

[ Upstream commit 41de54c64811bf087c8464fdeb43c6ad8be2686b ]

If blk_mq_init_allocated_queue() fails, make sure to free the poll
stat callback struct allocated.

Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 8a41cc5974fe..95e8005982cd 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2844,7 +2844,7 @@ struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set,
 		goto err_exit;
 
 	if (blk_mq_alloc_ctxs(q))
-		goto err_exit;
+		goto err_poll;
 
 	/* init q->mq_kobj and sw queues' kobjects */
 	blk_mq_sysfs_init(q);
@@ -2905,6 +2905,9 @@ err_hctxs:
 	kfree(q->queue_hw_ctx);
 err_sys_init:
 	blk_mq_sysfs_deinit(q);
+err_poll:
+	blk_stat_free_callback(q->poll_cb);
+	q->poll_cb = NULL;
 err_exit:
 	q->mq_ops = NULL;
 	return ERR_PTR(-ENOMEM);
-- 
2.20.1

[PATCH AUTOSEL 5.1 61/70] net: phylink: ensure consistent phy interface mode

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit c678726305b9425454be7c8a7624290b602602fc ]

Ensure that we supply the same phy interface mode to mac_link_down() as
we did for the corresponding mac_link_up() call.  This ensures that MAC
drivers that use the phy interface mode in these methods can depend on
mac_link_down() always corresponding to a mac_link_up() call for the
same interface mode.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phylink.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 89750c7dfd6f..efa31fcda505 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -51,6 +51,10 @@ struct phylink {
 
 	/* The link configuration settings */
 	struct phylink_link_state link_config;
+
+	/* The current settings */
+	phy_interface_t cur_interface;
+
 	struct gpio_desc *link_gpio;
 	struct timer_list link_poll;
 	void (*get_fixed_state)(struct net_device *dev,
@@ -453,12 +457,12 @@ static void phylink_resolve(struct work_struct *w)
 		if (!link_state.link) {
 			netif_carrier_off(ndev);
 			pl->ops->mac_link_down(ndev, pl->link_an_mode,
-					       pl->phy_state.interface);
+					       pl->cur_interface);
 			netdev_info(ndev, "Link is Down\n");
 		} else {
+			pl->cur_interface = link_state.interface;
 			pl->ops->mac_link_up(ndev, pl->link_an_mode,
-					     pl->phy_state.interface,
-					     pl->phydev);
+					     pl->cur_interface, pl->phydev);
 
 			netif_carrier_on(ndev);
 
-- 
2.20.1

[PATCH AUTOSEL 5.1 62/70] net: phy: dp83867: fix speed 10 in sgmii mode

[Sasha Levin]

From: Max Uvarov <muvarov@gmail.com>

[ Upstream commit 333061b924539c0de081339643f45514f5f1c1e6 ]

For supporting 10Mps speed in SGMII mode DP83867_10M_SGMII_RATE_ADAPT bit
of DP83867_10M_SGMII_CFG register has to be cleared by software.
That does not affect speeds 100 and 1000 so can be done on init.

Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83867.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 8448d01819ef..29cae4de9a4f 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -30,6 +30,8 @@
 #define DP83867_STRAP_STS1	0x006E
 #define DP83867_RGMIIDCTL	0x0086
 #define DP83867_IO_MUX_CFG	0x0170
+#define DP83867_10M_SGMII_CFG   0x016F
+#define DP83867_10M_SGMII_RATE_ADAPT_MASK BIT(7)
 
 #define DP83867_SW_RESET	BIT(15)
 #define DP83867_SW_RESTART	BIT(14)
@@ -277,6 +279,21 @@ static int dp83867_config_init(struct phy_device *phydev)
 				       DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL);
 	}
 
+	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+		/* For support SPEED_10 in SGMII mode
+		 * DP83867_10M_SGMII_RATE_ADAPT bit
+		 * has to be cleared by software. That
+		 * does not affect SPEED_100 and
+		 * SPEED_1000.
+		 */
+		ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
+				     DP83867_10M_SGMII_CFG,
+				     DP83867_10M_SGMII_RATE_ADAPT_MASK,
+				     0);
+		if (ret)
+			return ret;
+	}
+
 	/* Enable Interrupt output INT_OE in CFG3 register */
 	if (phy_interrupt_is_valid(phydev)) {
 		val = phy_read(phydev, DP83867_CFG3);
-- 
2.20.1

[PATCH AUTOSEL 5.1 63/70] net: phy: dp83867: increase SGMII autoneg timer duration

[Sasha Levin]

From: Max Uvarov <muvarov@gmail.com>

[ Upstream commit 1a97a477e666cbdededab93bd3754e508f0c09d7 ]

After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 are 01).
That is not enough to finalize autonegatiation on some devices.
Increase this timer duration to maximum supported 16ms.

Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83867.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 29cae4de9a4f..ffaf67bdb140 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -26,6 +26,12 @@
 
 /* Extended Registers */
 #define DP83867_CFG4            0x0031
+#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6))
+#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS   (3 << 5)
+#define DP83867_CFG4_SGMII_ANEG_TIMER_800US  (2 << 5)
+#define DP83867_CFG4_SGMII_ANEG_TIMER_2US    (1 << 5)
+#define DP83867_CFG4_SGMII_ANEG_TIMER_16MS   (0 << 5)
+
 #define DP83867_RGMIICTL	0x0032
 #define DP83867_STRAP_STS1	0x006E
 #define DP83867_RGMIIDCTL	0x0086
@@ -292,6 +298,18 @@ static int dp83867_config_init(struct phy_device *phydev)
 				     0);
 		if (ret)
 			return ret;
+
+		/* After reset SGMII Autoneg timer is set to 2us (bits 6 and 5
+		 * are 01). That is not enough to finalize autoneg on some
+		 * devices. Increase this timer duration to maximum 16ms.
+		 */
+		ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
+				     DP83867_CFG4,
+				     DP83867_CFG4_SGMII_ANEG_MASK,
+				     DP83867_CFG4_SGMII_ANEG_TIMER_16MS);
+
+		if (ret)
+			return ret;
 	}
 
 	/* Enable Interrupt output INT_OE in CFG3 register */
-- 
2.20.1

[PATCH AUTOSEL 5.1 64/70] net: phy: dp83867: Set up RGMII TX delay

[Sasha Levin]

From: Max Uvarov <muvarov@gmail.com>

[ Upstream commit 2b892649254fec01678c64f16427622b41fa27f4 ]

PHY_INTERFACE_MODE_RGMII_RXID is less then TXID
so code to set tx delay is never called.

Fixes: 2a10154abcb75 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83867.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index ffaf67bdb140..2995a1788ceb 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -255,10 +255,8 @@ static int dp83867_config_init(struct phy_device *phydev)
 		ret = phy_write(phydev, MII_DP83867_PHYCTRL, val);
 		if (ret)
 			return ret;
-	}
 
-	if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
-	    (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
+		/* Set up RGMII delays */
 		val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL);
 
 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
-- 
2.20.1

[PATCH AUTOSEL 5.1 65/70] scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route()

[Sasha Levin]

From: Varun Prakash <varun@chelsio.com>

[ Upstream commit cc555759117e8349088e0c5d19f2f2a500bafdbd ]

ip_dev_find() can return NULL so add a check for NULL pointer.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/cxgbi/libcxgbi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index 006372b3fba2..a50734f3c486 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -641,6 +641,10 @@ cxgbi_check_route(struct sockaddr *dst_addr, int ifindex)
 
 	if (ndev->flags & IFF_LOOPBACK) {
 		ndev = ip_dev_find(&init_net, daddr->sin_addr.s_addr);
+		if (!ndev) {
+			err = -ENETUNREACH;
+			goto rel_neigh;
+		}
 		mtu = ndev->mtu;
 		pr_info("rt dev %s, loopback -> %s, mtu %u.\n",
 			n->dev->name, ndev->name, mtu);
-- 
2.20.1

[PATCH AUTOSEL 5.1 66/70] scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask

[Sasha Levin]

From: Lianbo Jiang <lijiang@redhat.com>

[ Upstream commit 1d94f06e7f5df4064ef336b7b710f50143b64a53 ]

When SME is enabled, the smartpqi driver won't work on the HP DL385 G10
machine, which causes the failure of kernel boot because it fails to
allocate pqi error buffer. Please refer to the kernel log:
....
[    9.431749] usbcore: registered new interface driver uas
[    9.441524] Microsemi PQI Driver (v1.1.4-130)
[    9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5
[    9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found
         Starting dracut initqueue hook...
[  OK  ] Started Show Plymouth Boot Scre[    9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1
en.
[  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
[[0;[    9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer
....
[  139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts
[  139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts

Basically, the fact that the coherent DMA mask value wasn't set caused the
driver to fall back to SWIOTLB when SME is active.

For correct operation, lets call the dma_set_mask_and_coherent() to
properly set the mask for both streaming and coherent, in order to inform
the kernel about the devices DMA addressing capabilities.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 75ec43aa8df3..531824afba5f 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -7285,7 +7285,7 @@ static int pqi_pci_init(struct pqi_ctrl_info *ctrl_info)
 	else
 		mask = DMA_BIT_MASK(32);
 
-	rc = dma_set_mask(&ctrl_info->pci_dev->dev, mask);
+	rc = dma_set_mask_and_coherent(&ctrl_info->pci_dev->dev, mask);
 	if (rc) {
 		dev_err(&ctrl_info->pci_dev->dev, "failed to set DMA mask\n");
 		goto disable_device;
-- 
2.20.1

[PATCH AUTOSEL 5.1 67/70] scsi: scsi_dh_alua: Fix possible null-ptr-deref

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 12e750bc62044de096ab9a95201213fd912b9994 ]

If alloc_workqueue fails in alua_init, it should return -ENOMEM, otherwise
it will trigger null-ptr-deref while unloading module which calls
destroy_workqueue dereference
wq->lock like this:

BUG: KASAN: null-ptr-deref in __lock_acquire+0x6b4/0x1ee0
Read of size 8 at addr 0000000000000080 by task syz-executor.0/7045

CPU: 0 PID: 7045 Comm: syz-executor.0 Tainted: G         C        5.1.0+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
Call Trace:
 dump_stack+0xa9/0x10e
 __kasan_report+0x171/0x18d
 ? __lock_acquire+0x6b4/0x1ee0
 kasan_report+0xe/0x20
 __lock_acquire+0x6b4/0x1ee0
 lock_acquire+0xb4/0x1b0
 __mutex_lock+0xd8/0xb90
 drain_workqueue+0x25/0x290
 destroy_workqueue+0x1f/0x3f0
 __x64_sys_delete_module+0x244/0x330
 do_syscall_64+0x72/0x2a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 03197b61c5ec ("scsi_dh_alua: Use workqueue for RTPG")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/device_handler/scsi_dh_alua.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index d7ac498ba35a..2a9dcb8973b7 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -1174,10 +1174,8 @@ static int __init alua_init(void)
 	int r;
 
 	kaluad_wq = alloc_workqueue("kaluad", WQ_MEM_RECLAIM, 0);
-	if (!kaluad_wq) {
-		/* Temporary failure, bypass */
-		return SCSI_DH_DEV_TEMP_BUSY;
-	}
+	if (!kaluad_wq)
+		return -ENOMEM;
 
 	r = scsi_register_device_handler(&alua_dh);
 	if (r != 0) {
-- 
2.20.1

[PATCH AUTOSEL 5.1 68/70] scsi: libsas: delete sas port if expander discover failed

[Sasha Levin]

From: Jason Yan <yanaijie@huawei.com>

[ Upstream commit 3b0541791453fbe7f42867e310e0c9eb6295364d ]

The sas_port(phy->port) allocated in sas_ex_discover_expander() will not be
deleted when the expander failed to discover. This will cause resource leak
and a further issue of kernel BUG like below:

[159785.843156]  port-2:17:29: trying to add phy phy-2:17:29 fails: it's
already part of another port
[159785.852144] ------------[ cut here  ]------------
[159785.856833] kernel BUG at drivers/scsi/scsi_transport_sas.c:1086!
[159785.863000] Internal error: Oops - BUG: 0 [#1] SMP
[159785.867866] CPU: 39 PID: 16993 Comm: kworker/u96:2 Tainted: G
W  OE     4.19.25-vhulk1901.1.0.h111.aarch64 #1
[159785.878458] Hardware name: Huawei Technologies Co., Ltd.
Hi1620EVBCS/Hi1620EVBCS, BIOS Hi1620 CS B070 1P TA 03/21/2019
[159785.889231] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[159785.895224] pstate: 40c00009 (nZcv daif +PAN +UAO)
[159785.900094] pc : sas_port_add_phy+0x188/0x1b8
[159785.904524] lr : sas_port_add_phy+0x188/0x1b8
[159785.908952] sp : ffff0001120e3b80
[159785.912341] x29: ffff0001120e3b80 x28: 0000000000000000
[159785.917727] x27: ffff802ade8f5400 x26: ffff0000681b7560
[159785.923111] x25: ffff802adf11a800 x24: ffff0000680e8000
[159785.928496] x23: ffff802ade8f5728 x22: ffff802ade8f5708
[159785.933880] x21: ffff802adea2db40 x20: ffff802ade8f5400
[159785.939264] x19: ffff802adea2d800 x18: 0000000000000010
[159785.944649] x17: 00000000821bf734 x16: ffff00006714faa0
[159785.950033] x15: ffff0000e8ab4ecf x14: 7261702079646165
[159785.955417] x13: 726c612073277469 x12: ffff00006887b830
[159785.960802] x11: ffff00006773eaa0 x10: 7968702079687020
[159785.966186] x9 : 0000000000002453 x8 : 726f702072656874
[159785.971570] x7 : 6f6e6120666f2074 x6 : ffff802bcfb21290
[159785.976955] x5 : ffff802bcfb21290 x4 : 0000000000000000
[159785.982339] x3 : ffff802bcfb298c8 x2 : 337752b234c2ab00
[159785.987723] x1 : 337752b234c2ab00 x0 : 0000000000000000
[159785.993108] Process kworker/u96:2 (pid: 16993, stack limit =
0x0000000072dae094)
[159786.000576] Call trace:
[159786.003097]  sas_port_add_phy+0x188/0x1b8
[159786.007179]  sas_ex_get_linkrate.isra.5+0x134/0x140
[159786.012130]  sas_ex_discover_expander+0x128/0x408
[159786.016906]  sas_ex_discover_dev+0x218/0x4c8
[159786.021249]  sas_ex_discover_devices+0x9c/0x1a8
[159786.025852]  sas_discover_root_expander+0x134/0x160
[159786.030802]  sas_discover_domain+0x1b8/0x1e8
[159786.035148]  process_one_work+0x1b4/0x3f8
[159786.039230]  worker_thread+0x54/0x470
[159786.042967]  kthread+0x134/0x138
[159786.046269]  ret_from_fork+0x10/0x18
[159786.049918] Code: 91322300 f0004402 91178042 97fe4c9b (d4210000)
[159786.056083] Modules linked in: hns3_enet_ut(OE) hclge(OE) hnae3(OE)
hisi_sas_test_hw(OE) hisi_sas_test_main(OE) serdes(OE)
[159786.067202] ---[ end trace 03622b9e2d99e196  ]---
[159786.071893] Kernel panic - not syncing: Fatal exception
[159786.077190] SMP: stopping secondary CPUs
[159786.081192] Kernel Offset: disabled
[159786.084753] CPU features: 0x2,a2a00a38

Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reported-by: Jian Luo <luojian5@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_expander.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 3611a4ef0d15..7c2d78d189e4 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1014,6 +1014,8 @@ static struct domain_device *sas_ex_discover_expander(
 		list_del(&child->dev_list_node);
 		spin_unlock_irq(&parent->port->dev_list_lock);
 		sas_put_device(child);
+		sas_port_delete(phy->port);
+		phy->port = NULL;
 		return NULL;
 	}
 	list_add_tail(&child->siblings, &parent->ex_dev.children);
-- 
2.20.1

[PATCH AUTOSEL 5.1 69/70] mlxsw: spectrum: Prevent force of 56G

[Sasha Levin]

From: Amit Cohen <amitc@mellanox.com>

[ Upstream commit 275e928f19117d22f6d26dee94548baf4041b773 ]

Force of 56G is not supported by hardware in Ethernet devices. This
configuration fails with a bad parameter error from firmware.

Add check of this case. Instead of trying to set 56G with autoneg off,
return a meaningful error.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 6b8aa3761899..f4acb38569e1 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -3110,6 +3110,10 @@ mlxsw_sp_port_set_link_ksettings(struct net_device *dev,
 	ops->reg_ptys_eth_unpack(mlxsw_sp, ptys_pl, &eth_proto_cap, NULL, NULL);
 
 	autoneg = cmd->base.autoneg == AUTONEG_ENABLE;
+	if (!autoneg && cmd->base.speed == SPEED_56000) {
+		netdev_err(dev, "56G not supported with autoneg off\n");
+		return -EINVAL;
+	}
 	eth_proto_new = autoneg ?
 		ops->to_ptys_advert_link(mlxsw_sp, cmd) :
 		ops->to_ptys_speed(mlxsw_sp, cmd->base.speed);
-- 
2.20.1

[PATCH AUTOSEL 5.1 70/70] ocfs2: fix error path kobject memory leak

[Sasha Levin]

From: "Tobin C. Harding" <tobin@kernel.org>

[ Upstream commit b9fba67b3806e21b98bd5a98dc3921a8e9b42d61 ]

If a call to kobject_init_and_add() fails we should call kobject_put()
otherwise we leak memory.

Add call to kobject_put() in the error path of call to
kobject_init_and_add().  Please note, this has the side effect that the
release method is called if kobject_init_and_add() fails.

Link: http://lkml.kernel.org/r/20190513033458.2824-1-tobin@kernel.org
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/filecheck.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/ocfs2/filecheck.c b/fs/ocfs2/filecheck.c
index f65f2b2f594d..1906cc962c4d 100644
--- a/fs/ocfs2/filecheck.c
+++ b/fs/ocfs2/filecheck.c
@@ -193,6 +193,7 @@ int ocfs2_filecheck_create_sysfs(struct ocfs2_super *osb)
 	ret = kobject_init_and_add(&entry->fs_kobj, &ocfs2_ktype_filecheck,
 					NULL, "filecheck");
 	if (ret) {
+		kobject_put(&entry->fs_kobj);
 		kfree(fcheck);
 		return ret;
 	}
-- 
2.20.1