* stable backports for "ath10k: restore QCA9880-AR1A (v1) detection"
2019-09-07 21:43 ` [PATCH] ath10k: restore QCA9880-AR1A (v1) detection Sasha Levin
@ 2019-09-07 23:18 ` Christian Lamparter
2019-09-10 1:27 ` [PATCH] ath10k: restore QCA9880-AR1A (v1) detection Tom Psyborg
1 sibling, 0 replies; 3+ messages in thread
From: Christian Lamparter @ 2019-09-07 23:18 UTC (permalink / raw)
To: linux-wireless, ath10k, Sasha Levin; +Cc: Kalle Valo, stable
[-- Attachment #1: Type: text/plain, Size: 1515 bytes --]
Hello,
On Saturday, September 7, 2019 11:43:58 PM CEST Sasha Levin wrote:
> This commit has been processed because it contains a "Fixes:" tag,
> fixing commit: 1a7fecb766c8 ath10k: reset chip before reading chip_id in probe.
>
> The bot has tested the following trees: v5.2.13, v4.19.71, v4.14.142, v4.9.191, v4.4.191.
>
> v5.2.13: Failed to apply! Possible dependencies:
> 6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
The bot is right. Either add that patch or remove the "= {};" from the patch
that was sent to linux-wireless (based on "wireless-testing.git").
Alternatively, I've also added patches (as file attachments, I did this in
the hopes of fooling patchwork and the bots at least a bit... as well as
parking the patches for later). That said, I think this will go horribly
wrong because of this response. Since It has been a long time since I needed
a multi-version patch so I'm sorry for not being up-to-date with the latest
for-stable meta.
> v4.19.71: Failed to apply! Possible dependencies:
> 31324d17976e ("ath10k: support extended board data download for dual-band QCA9984")
> [...] too much
> [...]: [...]
>
> NOTE: The patch will not be queued to stable trees until it is upstream.
>
> How should we proceed with this patch?
You could let loose your ci-bot on the attached patches and see if they would
do the trick. I'm very optimistic that this will need some more time though.
So, "let's cross that bridge whenever we get there."
Cheers,
Christian
[-- Attachment #2: 4-9-ath10k-restore-QCA9880-AR1A-v1-detection.patch --]
[-- Type: text/x-patch, Size: 3151 bytes --]
From 38ac13d668f237941c8b77f16375f8f0e4de966a Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 25 Mar 2019 13:50:19 +0100
Subject: [PATCH 4.9] ath10k: restore QCA9880-AR1A (v1) detection
To: linux-wireless@vger.kernel.org,
ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>
This patch restores the old behavior that read
the chip_id on the QCA988x before resetting the
chip. This needs to be done in this order since
the unsupported QCA988x AR1A chips fall off the
bus when resetted. Otherwise the next MMIO Op
after the reset causes a BUS ERROR and panic.
Cc: stable@vger.kernel.org # 4.9
Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
drivers/net/wireless/ath/ath10k/pci.c | 36 +++++++++++++++++++--------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
--- a/drivers/net/wireless/ath/ath10k/pci.c 2019-09-08 00:07:21.374565470 +0200
+++ b/drivers/net/wireless/ath/ath10k/pci.c 2019-09-08 00:17:15.365912133 +0200
@@ -3172,7 +3172,7 @@ static int ath10k_pci_probe(struct pci_d
struct ath10k_pci *ar_pci;
enum ath10k_hw_rev hw_rev;
u32 chip_id;
- bool pci_ps;
+ bool pci_ps, is_qca988x = false;
int (*pci_soft_reset)(struct ath10k *ar);
int (*pci_hard_reset)(struct ath10k *ar);
u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
@@ -3181,6 +3181,7 @@ static int ath10k_pci_probe(struct pci_d
case QCA988X_2_0_DEVICE_ID:
hw_rev = ATH10K_HW_QCA988X;
pci_ps = false;
+ is_qca988x = true;
pci_soft_reset = ath10k_pci_warm_reset;
pci_hard_reset = ath10k_pci_qca988x_chip_reset;
targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
@@ -3300,6 +3301,19 @@ static int ath10k_pci_probe(struct pci_d
goto err_deinit_irq;
}
+ /* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+ * fall off the bus during chip_reset. These chips have the same pci
+ * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+ */
+ if (is_qca988x) {
+ chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+ if (chip_id != 0xffffffff) {
+ if (!ath10k_pci_chip_is_supported(pdev->device,
+ chip_id))
+ goto err_unsupported;
+ }
+ }
+
ret = ath10k_pci_chip_reset(ar);
if (ret) {
ath10k_err(ar, "failed to reset chip: %d\n", ret);
@@ -3312,11 +3326,8 @@ static int ath10k_pci_probe(struct pci_d
goto err_free_irq;
}
- if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
- ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
- pdev->device, chip_id);
- goto err_free_irq;
- }
+ if (!ath10k_pci_chip_is_supported(pdev->device, chip_id))
+ goto err_unsupported;
ret = ath10k_core_register(ar, chip_id);
if (ret) {
@@ -3326,6 +3337,10 @@ static int ath10k_pci_probe(struct pci_d
return 0;
+err_unsupported:
+ ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+ pdev->device, bus_params.chip_id);
+
err_free_irq:
ath10k_pci_free_irq(ar);
ath10k_pci_rx_retry_sync(ar);
[-- Attachment #3: 4-4-ath10k-restore-QCA9880-AR1A-v1-detection.patch --]
[-- Type: text/x-patch, Size: 2884 bytes --]
From 38ac13d668f237941c8b77f16375f8f0e4de966a Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 25 Mar 2019 13:50:19 +0100
Subject: [PATCH 4.4] ath10k: restore QCA9880-AR1A (v1) detection
To: linux-wireless@vger.kernel.org,
ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>
This patch restores the old behavior that read
the chip_id on the QCA988x before resetting the
chip. This needs to be done in this order since
the unsupported QCA988x AR1A chips fall off the
bus when resetted. Otherwise the next MMIO Op
after the reset causes a BUS ERROR and panic.
Cc: stable@vger.kernel.org # 4.4
Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
drivers/net/wireless/ath/ath10k/pci.c | 36 +++++++++++++++++++--------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
--- a/drivers/net/wireless/ath/ath10k/pci.c 2019-09-08 00:07:21.374565470 +0200
+++ b/drivers/net/wireless/ath/ath10k/pci.c 2019-09-08 00:17:15.365912133 +0200
@@ -2988,12 +2988,13 @@ static int ath10k_pci_probe(struct pci_d
struct ath10k_pci *ar_pci;
enum ath10k_hw_rev hw_rev;
u32 chip_id;
- bool pci_ps;
+ bool pci_ps, is_qca988x = false;
switch (pci_dev->device) {
case QCA988X_2_0_DEVICE_ID:
hw_rev = ATH10K_HW_QCA988X;
pci_ps = false;
+ is_qca988x = true;
break;
case QCA6164_2_1_DEVICE_ID:
case QCA6174_2_1_DEVICE_ID:
@@ -3087,6 +3088,19 @@ static int ath10k_pci_probe(struct pci_d
goto err_deinit_irq;
}
+ /* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+ * fall off the bus during chip_reset. These chips have the same pci
+ * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+ */
+ if (is_qca988x) {
+ chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+ if (chip_id != 0xffffffff) {
+ if (!ath10k_pci_chip_is_supported(pdev->device,
+ chip_id))
+ goto err_unsupported;
+ }
+ }
+
ret = ath10k_pci_chip_reset(ar);
if (ret) {
ath10k_err(ar, "failed to reset chip: %d\n", ret);
@@ -3099,11 +3113,8 @@ static int ath10k_pci_probe(struct pci_d
goto err_free_irq;
}
- if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
- ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
- pdev->device, chip_id);
- goto err_free_irq;
- }
+ if (!ath10k_pci_chip_is_supported(pdev->device, chip_id))
+ goto err_unsupported;
ret = ath10k_core_register(ar, chip_id);
if (ret) {
@@ -3113,6 +3124,10 @@ static int ath10k_pci_probe(struct pci_d
return 0;
+err_unsupported:
+ ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+ pdev->device, bus_params.chip_id);
+
err_free_irq:
ath10k_pci_free_irq(ar);
ath10k_pci_kill_tasklet(ar);
[-- Attachment #4: 4-14-ath10k-restore-QCA9880-AR1A-v1-detection.patch --]
[-- Type: text/x-patch, Size: 3153 bytes --]
From 38ac13d668f237941c8b77f16375f8f0e4de966a Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 25 Mar 2019 13:50:19 +0100
Subject: [PATCH 4.14] ath10k: restore QCA9880-AR1A (v1) detection
To: linux-wireless@vger.kernel.org,
ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>
This patch restores the old behavior that read
the chip_id on the QCA988x before resetting the
chip. This needs to be done in this order since
the unsupported QCA988x AR1A chips fall off the
bus when resetted. Otherwise the next MMIO Op
after the reset causes a BUS ERROR and panic.
Cc: stable@vger.kernel.org # 4.14
Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
drivers/net/wireless/ath/ath10k/pci.c | 36 +++++++++++++++++++--------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
--- a/drivers/net/wireless/ath/ath10k/pci.c 2019-09-08 00:07:21.374565470 +0200
+++ b/drivers/net/wireless/ath/ath10k/pci.c 2019-09-08 00:17:15.365912133 +0200
@@ -3202,7 +3202,7 @@ static int ath10k_pci_probe(struct pci_d
struct ath10k_pci *ar_pci;
enum ath10k_hw_rev hw_rev;
u32 chip_id;
- bool pci_ps;
+ bool pci_ps, is_qca988x = false;
int (*pci_soft_reset)(struct ath10k *ar);
int (*pci_hard_reset)(struct ath10k *ar);
u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
@@ -3211,6 +3211,7 @@ static int ath10k_pci_probe(struct pci_d
case QCA988X_2_0_DEVICE_ID:
hw_rev = ATH10K_HW_QCA988X;
pci_ps = false;
+ is_qca988x = true;
pci_soft_reset = ath10k_pci_warm_reset;
pci_hard_reset = ath10k_pci_qca988x_chip_reset;
targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
@@ -3331,6 +3332,19 @@ static int ath10k_pci_probe(struct pci_d
goto err_deinit_irq;
}
+ /* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+ * fall off the bus during chip_reset. These chips have the same pci
+ * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+ */
+ if (is_qca988x) {
+ chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+ if (chip_id != 0xffffffff) {
+ if (!ath10k_pci_chip_is_supported(pdev->device,
+ chip_id))
+ goto err_unsupported;
+ }
+ }
+
ret = ath10k_pci_chip_reset(ar);
if (ret) {
ath10k_err(ar, "failed to reset chip: %d\n", ret);
@@ -3343,11 +3357,8 @@ static int ath10k_pci_probe(struct pci_d
goto err_free_irq;
}
- if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
- ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
- pdev->device, chip_id);
- goto err_free_irq;
- }
+ if (!ath10k_pci_chip_is_supported(pdev->device, chip_id))
+ goto err_unsupported;
ret = ath10k_core_register(ar, chip_id);
if (ret) {
@@ -3357,6 +3368,10 @@ static int ath10k_pci_probe(struct pci_d
return 0;
+err_unsupported:
+ ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+ pdev->device, bus_params.chip_id);
+
err_free_irq:
ath10k_pci_free_irq(ar);
ath10k_pci_rx_retry_sync(ar);
[-- Attachment #5: 4-19-ath10k-restore-QCA9880-AR1A-v1-detection.patch --]
[-- Type: text/x-patch, Size: 3153 bytes --]
From 38ac13d668f237941c8b77f16375f8f0e4de966a Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 25 Mar 2019 13:50:19 +0100
Subject: [PATCH 4.19] ath10k: restore QCA9880-AR1A (v1) detection
To: linux-wireless@vger.kernel.org,
ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>
This patch restores the old behavior that read
the chip_id on the QCA988x before resetting the
chip. This needs to be done in this order since
the unsupported QCA988x AR1A chips fall off the
bus when resetted. Otherwise the next MMIO Op
after the reset causes a BUS ERROR and panic.
Cc: stable@vger.kernel.org # 4.19
Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
drivers/net/wireless/ath/ath10k/pci.c | 36 +++++++++++++++++++--------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
--- a/drivers/net/wireless/ath/ath10k/pci.c 2019-09-08 00:07:21.374565470 +0200
+++ b/drivers/net/wireless/ath/ath10k/pci.c 2019-09-08 00:17:15.365912133 +0200
@@ -3483,7 +3483,7 @@ static int ath10k_pci_probe(struct pci_d
struct ath10k_pci *ar_pci;
enum ath10k_hw_rev hw_rev;
u32 chip_id;
- bool pci_ps;
+ bool pci_ps, is_qca988x = false;
int (*pci_soft_reset)(struct ath10k *ar);
int (*pci_hard_reset)(struct ath10k *ar);
u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
@@ -3493,6 +3493,7 @@ static int ath10k_pci_probe(struct pci_d
case QCA988X_2_0_DEVICE_ID:
hw_rev = ATH10K_HW_QCA988X;
pci_ps = false;
+ is_qca988x = true;
pci_soft_reset = ath10k_pci_warm_reset;
pci_hard_reset = ath10k_pci_qca988x_chip_reset;
targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
@@ -3612,6 +3613,19 @@ static int ath10k_pci_probe(struct pci_d
goto err_deinit_irq;
}
+ /* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+ * fall off the bus during chip_reset. These chips have the same pci
+ * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+ */
+ if (is_qca988x) {
+ chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+ if (chip_id != 0xffffffff) {
+ if (!ath10k_pci_chip_is_supported(pdev->device,
+ chip_id))
+ goto err_unsupported;
+ }
+ }
+
ret = ath10k_pci_chip_reset(ar);
if (ret) {
ath10k_err(ar, "failed to reset chip: %d\n", ret);
@@ -3624,11 +3638,8 @@ static int ath10k_pci_probe(struct pci_d
goto err_free_irq;
}
- if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
- ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
- pdev->device, chip_id);
- goto err_free_irq;
- }
+ if (!ath10k_pci_chip_is_supported(pdev->device, chip_id))
+ goto err_unsupported;
ret = ath10k_core_register(ar, chip_id);
if (ret) {
@@ -3638,6 +3649,10 @@ static int ath10k_pci_probe(struct pci_d
return 0;
+err_unsupported:
+ ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+ pdev->device, bus_params.chip_id);
+
err_free_irq:
ath10k_pci_free_irq(ar);
ath10k_pci_rx_retry_sync(ar);
[-- Attachment #6: 5-2-ath10k-restore-QCA9880-AR1A-v1-detection.patch --]
[-- Type: text/x-patch, Size: 3553 bytes --]
From 38ac13d668f237941c8b77f16375f8f0e4de966a Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 25 Mar 2019 13:50:19 +0100
Subject: [PATCH 5.2] ath10k: restore QCA9880-AR1A (v1) detection
To: linux-wireless@vger.kernel.org,
ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@codeaurora.org>
This patch restores the old behavior that read
the chip_id on the QCA988x before resetting the
chip. This needs to be done in this order since
the unsupported QCA988x AR1A chips fall off the
bus when resetted. Otherwise the next MMIO Op
after the reset causes a BUS ERROR and panic.
Cc: stable@vger.kernel.org # 5.2
Fixes: 1a7fecb766c8 ("ath10k: reset chip before reading chip_id in probe")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
drivers/net/wireless/ath/ath10k/pci.c | 36 +++++++++++++++++++--------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3490,7 +3490,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
struct ath10k_pci *ar_pci;
enum ath10k_hw_rev hw_rev;
struct ath10k_bus_params bus_params;
- bool pci_ps;
+ bool pci_ps, is_qca988x = false;
int (*pci_soft_reset)(struct ath10k *ar);
int (*pci_hard_reset)(struct ath10k *ar);
u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
@@ -3500,6 +3500,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
case QCA988X_2_0_DEVICE_ID:
hw_rev = ATH10K_HW_QCA988X;
pci_ps = false;
+ is_qca988x = true;
pci_soft_reset = ath10k_pci_warm_reset;
pci_hard_reset = ath10k_pci_qca988x_chip_reset;
targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
@@ -3619,25 +3620,34 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
goto err_deinit_irq;
}
+ bus_params.dev_type = ATH10K_DEV_TYPE_LL;
+ bus_params.link_can_suspend = true;
+ /* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
+ * fall off the bus during chip_reset. These chips have the same pci
+ * device id as the QCA9880 BR4A or 2R4E. So that's why the check.
+ */
+ if (is_qca988x) {
+ bus_params.chip_id =
+ ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+ if (bus_params.chip_id != 0xffffffff) {
+ if (!ath10k_pci_chip_is_supported(pdev->device,
+ bus_params.chip_id))
+ goto err_unsupported;
+ }
+ }
+
ret = ath10k_pci_chip_reset(ar);
if (ret) {
ath10k_err(ar, "failed to reset chip: %d\n", ret);
goto err_free_irq;
}
- bus_params.dev_type = ATH10K_DEV_TYPE_LL;
- bus_params.link_can_suspend = true;
bus_params.chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
- if (bus_params.chip_id == 0xffffffff) {
- ath10k_err(ar, "failed to get chip id\n");
- goto err_free_irq;
- }
+ if (bus_params.chip_id == 0xffffffff)
+ goto err_unsupported;
- if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) {
- ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
- pdev->device, bus_params.chip_id);
+ if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id))
goto err_free_irq;
- }
ret = ath10k_core_register(ar, &bus_params);
if (ret) {
@@ -3647,6 +3657,10 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
return 0;
+err_unsupported:
+ ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+ pdev->device, bus_params.chip_id);
+
err_free_irq:
ath10k_pci_free_irq(ar);
ath10k_pci_rx_retry_sync(ar);
--
2.23.0
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] ath10k: restore QCA9880-AR1A (v1) detection
2019-09-07 21:43 ` [PATCH] ath10k: restore QCA9880-AR1A (v1) detection Sasha Levin
2019-09-07 23:18 ` stable backports for "ath10k: restore QCA9880-AR1A (v1) detection" Christian Lamparter
@ 2019-09-10 1:27 ` Tom Psyborg
1 sibling, 0 replies; 3+ messages in thread
From: Tom Psyborg @ 2019-09-10 1:27 UTC (permalink / raw)
To: Kalle Valo
Cc: Christian Lamparter, linux-wireless, ath10k, Sasha Levin, stable
Hi Kalle
According to this very old post
http://lists.infradead.org/pipermail/ath10k/2013-July/000021.html
seems like you've been misinformed on amount of these cards that were
put out in the market.
At least digipart only have >40000 units in stocks
https://www.digipart.com/part/QCA9880-AR1A and other retailers
probably few thousands more.
With that large amount of cards I think it is justified to request
firmware support for the chip. And probably a lot easier to make few
firmware modifications than go hacking a bunch of API calls so it
works with v2 firmware.
I made some modifications to driver and it differentiates properly
between v1 and v2 card, this is the current status bootlog:
[ 0.000000] Linux version 4.19.57 (whtw46ww4@I5576) (gcc version
7.4.0 (OpenWrt GCC 7.4.0 r10563-db8e08a)) #0 Sun Jul 21 09:26:06 2019
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] MIPS: machine is TP-Link Archer C7 v1
[ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] Normal zone: 288 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] random: get_random_bytes called from
start_kernel+0x98/0x51c with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
[ 0.000000] Kernel command line: console=ttyS0,115200n8
rootfstype=squashfs,jffs2 ignore_loglevel
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 118256K/131072K available (4518K kernel code,
269K rwdata, 1104K rodata, 4980K init, 215K bss, 12816K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] CPU clock: 720.000 MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 5309056796 ns
[ 0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps
every 5965232126ns
[ 0.008691] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[ 0.075695] pid_max: default: 32768 minimum: 301
[ 0.081040] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.088408] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.100532] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.111534] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.118449] pinctrl core: initialized pinctrl subsystem
[ 0.125072] NET: Registered protocol family 16
[ 0.137497] PCI host bridge /ahb/pcie-controller@18250000 ranges:
[ 0.144293] MEM 0x0000000012000000..0x0000000013ffffff
[ 0.150153] IO 0x0000000000000001..0x0000000000000001
[ 0.173135] PCI host bridge to bus 0000:00
[ 0.177708] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[ 0.185419] pci_bus 0000:00: root bus resource [io 0x0001]
[ 0.191622] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.199195] pci_bus 0000:00: No busn resource found for root bus,
will use [bus 00-ff]
[ 0.208053] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
[ 0.214800] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.222408] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.229953] pci 0000:00:00.0: supports D1 D2
[ 0.235724] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.243140] pci 0000:00:00.0: BAR 0: assigned [mem
0x12000000-0x121fffff 64bit]
[ 0.251297] pci 0000:00:00.0: BAR 6: assigned [mem
0x12200000-0x1220ffff pref]
[ 0.262142] clocksource: Switched to clocksource MIPS
[ 0.304897] NET: Registered protocol family 2
[ 0.310448] tcp_listen_portaddr_hash hash table entries: 512
(order: 0, 4096 bytes)
[ 0.319090] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.326880] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.333978] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.341161] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.347721] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.355054] NET: Registered protocol family 1
[ 0.359955] PCI: CLS 0 bytes, default 32
[ 2.602152] random: fast init done
[ 5.128772] Crashlog allocated RAM at address 0x3f00000
[ 5.135884] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[ 5.148697] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.155250] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 5.232790] io scheduler noop registered
[ 5.237160] io scheduler deadline registered (default)
[ 5.243159] ar7200-usb-phy 18030000.usb-phy0: phy reset is missing
[ 5.250094] ar7200-usb-phy 18030010.usb-phy1: phy reset is missing
[ 5.258595] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[ 5.265572] gpio-export gpio-export: 2 gpio(s) exported
[ 5.272126] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 5.279862] console [ttyS0] disabled
[ 5.283922] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9,
base_baud = 2500000) is a 16550A
[ 5.293553] console [ttyS0] enabled
[ 5.300959] bootconsole [early0] disabled
[ 5.327081] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 5.331977] 3 fixed-partitions partitions found on MTD device spi0.0
[ 5.338440] Creating 3 MTD partitions on "spi0.0":
[ 5.343320] 0x000000000000-0x000000020000 : "u-boot"
[ 5.349085] 0x000000020000-0x0000007f0000 : "firmware"
[ 5.356806] 2 tplink-fw partitions found on MTD device firmware
[ 5.362861] Creating 2 MTD partitions on "firmware":
[ 5.367902] 0x000000000000-0x000000100000 : "kernel"
[ 5.373680] 0x000000100000-0x0000007d0000 : "rootfs"
[ 5.379320] mtd: device 3 (rootfs) set to be root filesystem
[ 5.386376] mtdsplit: no squashfs found in "rootfs"
[ 5.391368] 0x0000007f0000-0x000000800000 : "art"
[ 5.397879] libphy: Fixed MDIO Bus: probed
[ 5.753920] libphy: ag71xx_mdio: probed
[ 5.778627] switch0: Atheros AR8327 rev. 4 switch registered on mdio-bus.0
[ 6.431314] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:00
[uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
[ 6.442773] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
[ 6.801780] ag71xx 1a000000.eth: connected to PHY at fixed-0:00
[uid=00000000, driver=Generic PHY]
[ 6.811442] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: sgmii
[ 6.820003] NET: Registered protocol family 10
[ 6.829252] Segment Routing with IPv6
[ 6.833117] NET: Registered protocol family 17
[ 6.837701] 8021q: 802.1Q VLAN Support v1.8
[ 6.862923] Freeing unused kernel memory: 4980K
[ 6.867527] This architecture does not have kernel memory protection.
[ 6.874085] Run /init as init process
[ 6.889985] init: Console is alive
[ 6.893771] init: - watchdog -
[ 6.915582] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.931970] usbcore: registered new interface driver usbfs
[ 6.937657] usbcore: registered new interface driver hub
[ 6.943149] usbcore: registered new device driver usb
[ 6.953795] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.961871] ehci-platform: EHCI generic platform driver
[ 6.967460] ehci-platform 1b000000.usb: EHCI Host Controller
[ 6.973270] ehci-platform 1b000000.usb: new USB bus registered,
assigned bus number 1
[ 6.981281] ehci-platform 1b000000.usb: irq 14, io mem 0x1b000000
[ 7.012216] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
[ 7.019257] hub 1-0:1.0: USB hub found
[ 7.023457] hub 1-0:1.0: 1 port detected
[ 7.027987] ehci-platform 1b400000.usb: EHCI Host Controller
[ 7.033824] ehci-platform 1b400000.usb: new USB bus registered,
assigned bus number 2
[ 7.041847] ehci-platform 1b400000.usb: irq 15, io mem 0x1b400000
[ 7.072165] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00
[ 7.079206] hub 2-0:1.0: USB hub found
[ 7.083403] hub 2-0:1.0: 1 port detected
[ 7.088430] kmodloader: done loading kernel modules from
/etc/modules-boot.d/*
[ 7.106193] init: - preinit -
[ 7.291223] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.369076] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.538353] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.515044] urandom_read: 4 callbacks suppressed
[ 8.515051] random: procd: uninitialized urandom read (4 bytes read)
[ 8.531594] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 8.537651] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready
[ 9.573291] eth1: link up (1000Mbps/Full duplex)
[ 9.577999] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 9.584709] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.1: link becomes ready
[ 11.669504] eth1: link down
[ 11.688655] procd: - early -
[ 11.691672] procd: - watchdog -
[ 12.239816] procd: - watchdog -
[ 12.243288] procd: - ubus -
[ 12.252031] random: ubusd: uninitialized urandom read (4 bytes read)
[ 12.296521] random: ubusd: uninitialized urandom read (4 bytes read)
[ 12.304295] procd: - init -
[ 12.714303] kmodloader: loading kernel modules from /etc/modules.d/*
[ 12.730578] urngd: v1.0.0 started.
[ 12.756700] Loading modules backported from Linux version
v5.2-rc7-0-g6fbc7275c7a9
[ 12.764427] Backport generated by backports.git v5.2-rc7-1-0-g021a6ba1
[ 12.820407] xt_time: kernel timezone is -0000
[ 12.982093] PPP generic driver version 2.4.2
[ 12.992983] NET: Registered protocol family 24
[ 13.002433] random: crng init done
[ 13.038820] ath10k_pci 0000:00:00.0: pci probe 168c:003c 168c:3223
[ 13.045528] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 13.051917] ath10k_pci 0000:00:00.0: boot pci_mem 0x1cb18953
[ 13.060199] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1
irq_mode 0 reset_mode 0
[ 13.068700] ath10k_pci 0000:00:00.0: boot qca99x0 chip reset
[ 13.074453] ath10k_pci 0000:00:00.0: boot cold reset
[ 13.079495] ath10k_pci 0000:00:00.0: boot target and PCIe out of reset
[ 13.086124] ath10k_pci 0000:00:00.0: boot cold reset complete
[ 13.091955] ath10k_pci 0000:00:00.0: boot waiting target to initialise
[ 13.098589] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.114327] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.130053] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.145790] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.161521] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.177252] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.192988] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.208717] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.224458] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.240183] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.255914] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.271643] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.287376] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.303112] ath10k_pci 0000:00:00.0: boot target indicator 0
[ 13.318842] ath10k_pci 0000:00:00.0: boot target indicator 2
[ 13.324613] ath10k_pci 0000:00:00.0: boot target initialised
[ 13.330355] ath10k_pci 0000:00:00.0: boot qca99x0 chip reset complete (cold)
[ 13.337552] ath10k_pci 0000:00:00.0: boot hif power up
[ 13.342788] ath10k_pci 0000:00:00.0: boot qca99x0 chip reset
[ 13.348528] ath10k_pci 0000:00:00.0: boot cold reset
[ 13.353584] ath10k_pci 0000:00:00.0: boot target and PCIe out of reset
[ 13.360205] ath10k_pci 0000:00:00.0: boot cold reset complete
[ 13.366043] ath10k_pci 0000:00:00.0: boot waiting target to initialise
[ 13.372678] ath10k_pci 0000:00:00.0: boot target indicator 2
[ 13.378428] ath10k_pci 0000:00:00.0: boot target initialised
[ 13.384181] ath10k_pci 0000:00:00.0: boot qca99x0 chip reset complete (cold)
[ 13.391374] ath10k_pci 0000:00:00.0: boot init ce src ring id 0
entries 16 base_addr 2ceb9a7e
[ 13.400070] ath10k_pci 0000:00:00.0: boot ce dest ring id 1 entries
128 base_addr 289c278c
[ 13.408497] ath10k_pci 0000:00:00.0: boot ce dest ring id 2 entries
64 base_addr c0e40e4c
[ 13.416844] ath10k_pci 0000:00:00.0: boot init ce src ring id 3
entries 32 base_addr 139e13fb
[ 13.425772] ath10k_pci 0000:00:00.0: boot init ce src ring id 4
entries 8192 base_addr 42800924
[ 13.434638] ath10k_pci 0000:00:00.0: boot ce dest ring id 5 entries
128 base_addr 230402d2
[ 13.443068] ath10k_pci 0000:00:00.0: boot init ce src ring id 7
entries 2 base_addr 11334358
[ 13.451652] ath10k_pci 0000:00:00.0: boot ce dest ring id 7 entries
2 base_addr 70d67374
[ 13.460652] ath10k_pci 0000:00:00.0: bmi get target info
[ 13.466143] ath10k_pci 0000:00:00.0: Hardware name qca988x hw1.0
version 0x4000002c
[ 13.563795] firmware ath10k!pre-cal-pci-0000:00:00.0.bin:
firmware_loading_store: map pages failed
[ 13.573090] ath10k_pci 0000:00:00.0: boot fw request
'ath10k/pre-cal-pci-0000:00:00.0.bin': -11
[ 13.761310] firmware ath10k!cal-pci-0000:00:00.0.bin:
firmware_loading_store: map pages failed
[ 13.770242] ath10k_pci 0000:00:00.0: boot fw request
'ath10k/cal-pci-0000:00:00.0.bin': -11
[ 13.778749] ath10k_pci 0000:00:00.0: trying fw api 6
[ 13.962772] firmware ath10k!QCA988X!hw2.0!firmware-6.bin:
firmware_loading_store: map pages failed
[ 13.972018] ath10k_pci 0000:00:00.0: boot fw request
'ath10k/QCA988X/hw2.0/firmware-6.bin': -11
[ 13.980888] ath10k_pci 0000:00:00.0: trying fw api 5
[ 14.004273] ath10k_pci 0000:00:00.0: boot fw request
'ath10k/QCA988X/hw2.0/firmware-5.bin': 0
[ 14.012975] ath10k_pci 0000:00:00.0: found fw version 10.2.4-1.0-00043
[ 14.019600] ath10k_pci 0000:00:00.0: found fw timestamp 1541656652
[ 14.025891] ath10k_pci 0000:00:00.0: found otp image ie (7221 B)
[ 14.031981] ath10k_pci 0000:00:00.0: found fw image ie (241515 B)
[ 14.038172] ath10k_pci 0000:00:00.0: found firmware features ie (3 B)
[ 14.044715] ath10k_pci 0000:00:00.0: Enabling feature bit: 3
[ 14.050452] ath10k_pci 0000:00:00.0: Enabling feature bit: 10
[ 14.056292] ath10k_pci 0000:00:00.0: Enabling feature bit: 12
[ 14.062121] ath10k_pci 0000:00:00.0: Enabling feature bit: 16
[ 14.067957] ath10k_pci 0000:00:00.0: features
[ 14.072396] ath10k_pci 0000:00:00.0: 00000000: 00 01 14 08
....
[ 14.081658] ath10k_pci 0000:00:00.0: found fw ie wmi op version 5
[ 14.087848] ath10k_pci 0000:00:00.0: found fw ie htt op version 2
[ 14.094046] ath10k_pci 0000:00:00.0: using fw api 5
[ 14.099004] ath10k_pci 0000:00:00.0: qca988x hw1.0 target
0x4000002c chip_id 0x043200ff sub 168c:3223
[ 14.108373] ath10k_pci 0000:00:00.0: kconfig debug 1 debugfs 1
tracing 1 dfs 1 testmode 1
[ 14.121519] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00043
api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 ed0aafd8
[ 14.133799] ath10k_pci 0000:00:00.0: boot did not find a pre
calibration file, try DT next: -11
[ 14.142638] ath10k_pci 0000:00:00.0: unable to load pre cal data from DT: -2
[ 14.149787] ath10k_pci 0000:00:00.0: could not load pre cal data: -2
[ 14.156243] ath10k_pci 0000:00:00.0: boot upload otp to 0x1234 len
7221 for board id
[ 14.164111] ath10k_pci 0000:00:00.0: bmi fast download address
0x1234 buffer 0x3ca910fe length 7221
[ 14.173297] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x1234
[ 14.253843] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x3ca910fe
length 7220
[ 14.285961] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x9fc59964 length 4
[ 14.293057] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x0
[ 14.299517] ath10k_pci 0000:00:00.0: bmi execute address 0x1234 param 0x10
[ 14.306655] ath10k_pci 0000:00:00.0: bmi execute result 0x10
[ 14.312413] ath10k_pci 0000:00:00.0: boot get otp board id result
0x00000010 board_id 0 chip_id 0 ext_bid_support 0
[ 14.323010] ath10k_pci 0000:00:00.0: board id does not exist in
otp, ignore it
[ 14.330335] ath10k_pci 0000:00:00.0: SMBIOS bdf variant name not set.
[ 14.336877] ath10k_pci 0000:00:00.0: DT bdf variant name not set.
[ 14.343077] ath10k_pci 0000:00:00.0: boot using board name
'bus=pci,vendor=168c,device=003c,subsystem-vendor=168c,subsystem-device=3223'
[ 14.355522] ath10k_pci 0000:00:00.0: boot using board name
'bus=pci,vendor=168c,device=003c,subsystem-vendor=168c,subsystem-device=3223'
[ 14.458077] firmware ath10k!QCA988X!hw2.0!board-2.bin:
firmware_loading_store: map pages failed
[ 14.467099] ath10k_pci 0000:00:00.0: boot fw request
'ath10k/QCA988X/hw2.0/board-2.bin': -11
[ 14.482333] ath10k_pci 0000:00:00.0: boot fw request
'ath10k/QCA988X/hw2.0/board.bin': 0
[ 14.490551] ath10k_pci 0000:00:00.0: using board api 1
[ 14.495851] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A
crc32 bebc7c08
[ 14.503280] ath10k_pci 0000:00:00.0: bmi start
[ 14.507790] ath10k_pci 0000:00:00.0: bmi write address 0x400800 length 4
[ 14.546287] ath10k_pci 0000:00:00.0: bmi read address 0x400810 length 4
[ 14.557471] ath10k_pci 0000:00:00.0: bmi write address 0x400810 length 4
[ 14.572212] ath10k_pci 0000:00:00.0: bmi write address 0x400844 length 4
[ 14.592214] ath10k_pci 0000:00:00.0: bmi write address 0x400904 length 4
[ 14.602208] ath10k_pci 0000:00:00.0: bmi write address 0x4008bc length 4
[ 14.622213] ath10k_pci 0000:00:00.0: boot did not find a pre
calibration file, try DT next: -11
[ 14.631043] ath10k_pci 0000:00:00.0: unable to load pre cal data from DT: -2
[ 14.638205] ath10k_pci 0000:00:00.0: failed to load pre cal data: -2
[ 14.644657] ath10k_pci 0000:00:00.0: pre cal download procedure
failed, try cal file: -2
[ 14.652880] ath10k_pci 0000:00:00.0: boot did not find a
calibration file, try DT next: -11
[ 14.661349] ath10k_pci 0000:00:00.0: boot did not find DT entry,
try target EEPROM next: -2
[ 14.669830] ath10k_pci 0000:00:00.0: boot did not find target
EEPROM entry, try OTP next: -122
[ 14.678578] ath10k_pci 0000:00:00.0: bmi read address 0x4008ac length 4
[ 14.695286] ath10k_pci 0000:00:00.0: boot push board extended data addr 0x0
[ 14.702401] ath10k_pci 0000:00:00.0: bmi read address 0x400854 length 4
[ 14.709186] ath10k_pci 0000:00:00.0: bmi write address 0x401cb0 length 2116
[ 14.719947] ath10k_pci 0000:00:00.0: bmi write address 0x400858 length 4
[ 14.726782] ath10k_pci 0000:00:00.0: boot upload otp to 0x1234 len 7221
[ 14.733509] ath10k_pci 0000:00:00.0: bmi fast download address
0x1234 buffer 0x3ca910fe length 7221
[ 14.742691] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x1234
[ 14.749419] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x3ca910fe
length 7220
[ 14.781532] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x51c0dfb6 length 4
[ 14.788635] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x0
[ 14.795111] ath10k_pci 0000:00:00.0: bmi execute address 0x1234 param 0x0
[ 14.802126] ath10k_pci 0000:00:00.0: bmi execute result 0x0
[ 14.807791] ath10k_pci 0000:00:00.0: boot otp execute result 0
[ 14.813716] ath10k_pci 0000:00:00.0: boot using calibration mode otp
[ 14.820166] ath10k_pci 0000:00:00.0: boot uploading firmware image
c21dc34c len 241515
[ 14.828219] ath10k_pci 0000:00:00.0: bmi fast download address
0x1234 buffer 0xc21dc34c length 241515
[ 14.837583] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x1234
[ 14.844343] ath10k_pci 0000:00:00.0: bmi lz data buffer 0xc21dc34c
length 241512
[ 15.865780] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x9fc59964 length 4
[ 15.872878] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x0
[ 15.879337] ath10k_pci 0000:00:00.0: bmi write address 0x400814 length 4
[ 15.886185] ath10k_pci 0000:00:00.0: pci hif map service
[ 15.891585] ath10k_pci 0000:00:00.0: boot htc service 'Control' ul
pipe 0 dl pipe 1 eid 0 ready
[ 15.900428] ath10k_pci 0000:00:00.0: boot htc service 'Control' eid
0 TX flow control disabled
[ 15.909175] ath10k_pci 0000:00:00.0: bmi done
[ 15.913627] ath10k_pci 0000:00:00.0: htt tx max num pending tx 1424
[ 15.920206] ath10k_pci 0000:00:00.0: htt rx ring size 512 fill_level 255
[ 15.927035] ath10k_pci 0000:00:00.0: boot hif start
[ 17.012155] ath10k_pci 0000:00:00.0: failed to receive control
response completion, polling..
[ 17.020805] ath10k_pci 0000:00:00.0: pci hif send complete check
[ 17.026909] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[ 17.032936] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10
[ 17.039476] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6
[ 17.046029] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0
[ 17.052581] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0
[ 17.059117] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0
[ 17.065671] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0
[ 17.072224] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0
[ 17.078760] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1
[ 17.085320] ath10k_pci 0000:00:00.0: pci hif send complete check
[ 17.091414] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[ 17.097440] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10
[ 17.103994] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6
[ 17.110538] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0
[ 17.117087] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0
[ 17.123640] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0
[ 17.130178] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0
[ 17.136730] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0
[ 17.143284] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1
[ 17.149842] ath10k_pci 0000:00:00.0: pci hif send complete check
[ 17.155950] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[ 17.161967] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10
[ 17.168516] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6
[ 17.175068] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0
[ 17.181606] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0
[ 17.188157] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0
[ 17.194711] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0
[ 17.201246] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0
[ 17.207802] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1
[ 17.214355] ath10k_pci 0000:00:00.0: pci hif send complete check
[ 17.220448] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[ 17.226478] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10
[ 17.233029] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6
[ 17.239570] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0
[ 17.246128] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0
[ 17.252675] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0
[ 17.259212] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0
[ 17.265764] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0
[ 17.272319] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1
[ 17.278861] ath10k_pci 0000:00:00.0: pci hif send complete check
[ 17.284967] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[ 17.290980] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10
[ 17.297533] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6
[ 17.304084] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0
[ 17.310620] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0
[ 17.317176] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0
[ 17.323729] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0
[ 17.330274] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0
[ 17.336824] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1
[ 17.343380] ath10k_pci 0000:00:00.0: pci hif send complete check
[ 17.349474] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[ 17.355501] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10
[ 17.362044] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6
[ 17.368594] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0
[ 17.375144] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0
[ 17.381682] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0
[ 17.388235] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0
[ 17.394790] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0
[ 17.401331] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1
[ 17.407900] ath10k_pci 0000:00:00.0: pci hif send complete check
[ 17.414006] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[ 17.420018] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10
[ 17.426570] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6
[ 17.433119] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0
[ 17.439659] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0
[ 17.446207] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0
[ 17.452753] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 127 0
[ 17.459288] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0
[ 17.465844] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1
[ 17.472393] ath10k_pci 0000:00:00.0: pci hif send complete check
[ 17.478482] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[ 17.484509] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10
[ 17.491052] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6
[ 17.497600] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0
[ 17.504152] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0
[ 17.510689] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0
[ 17.517242] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 127 0
[ 17.523797] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0
[ 17.530341] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1
[ 18.612158] ath10k_pci 0000:00:00.0: ctl_resp never came in (-145)
[ 18.618427] ath10k_pci 0000:00:00.0: failed to connect to HTC: -145
[ 18.624797] ath10k_pci 0000:00:00.0: boot hif stop
[ 18.630758] ath10k_pci 0000:00:00.0: could not init core (-145)
[ 18.636893] ath10k_pci 0000:00:00.0: boot hif power down
[ 18.642304] ath10k_pci 0000:00:00.0: could not probe fw (-145)
[ 18.694782] ath: EEPROM regdomain: 0x0
[ 18.698591] ath: EEPROM indicates default country code should be used
[ 18.705152] ath: doing EEPROM country->regdmn map search
[ 18.710550] ath: country maps to regdmn code: 0x3a
[ 18.715420] ath: Country alpha2 being used: US
[ 18.719921] ath: Regpair used: 0x3a
[ 18.741147] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 18.749490] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=12
[ 18.812526] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 47.429359] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 47.436481] eth1: link up (1000Mbps/Full duplex)
[ 47.441181] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 47.475602] br-lan: port 1(eth1.1) entered blocking state
[ 47.481087] br-lan: port 1(eth1.1) entered disabled state
[ 47.486905] device eth1.1 entered promiscuous mode
[ 47.491769] device eth1 entered promiscuous mode
[ 47.546852] br-lan: port 1(eth1.1) entered blocking state
[ 47.552373] br-lan: port 1(eth1.1) entered forwarding state
[ 47.558177] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 47.646842] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 47.674813] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 48.452468] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 48.693435] eth0: link up (1000Mbps/Full duplex)
[ 48.698191] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 48.722234] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Regards, Tom
^ permalink raw reply [flat|nested] 3+ messages in thread