[PATCH AUTOSEL 4.14 001/115] net: ovs: fix return type of ndo_start_xmit function

[PATCH AUTOSEL 4.14 001/115] net: ovs: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit eddf11e18dff0e8671e06ce54e64cfc843303ab9 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/openvswitch/vport-internal_dev.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/openvswitch/vport-internal_dev.c b/net/openvswitch/vport-internal_dev.c
index b9377afeaba45..1025bed255b9b 100644
--- a/net/openvswitch/vport-internal_dev.c
+++ b/net/openvswitch/vport-internal_dev.c
@@ -44,7 +44,8 @@ static struct internal_dev *internal_dev_priv(struct net_device *netdev)
 }
 
 /* Called with rcu_read_lock_bh. */
-static int internal_dev_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t
+internal_dev_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	int len, err;
 
@@ -63,7 +64,7 @@ static int internal_dev_xmit(struct sk_buff *skb, struct net_device *netdev)
 	} else {
 		netdev->stats.tx_errors++;
 	}
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static int internal_dev_open(struct net_device *netdev)
-- 
2.20.1

[PATCH AUTOSEL 4.14 002/115] net: xen-netback: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit a9ca7f17c6d240e269a24cbcd76abf9a940309dd ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netback/interface.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 2641e76d03d9d..b5fa910b47b70 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -172,7 +172,8 @@ static u16 xenvif_select_queue(struct net_device *dev, struct sk_buff *skb,
 	return vif->hash.mapping[skb_get_hash_raw(skb) % size];
 }
 
-static int xenvif_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+xenvif_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct xenvif *vif = netdev_priv(dev);
 	struct xenvif_queue *queue = NULL;
-- 
2.20.1

[PATCH AUTOSEL 4.14 003/115] ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode

[Sasha Levin]

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit b830526f304764753fcb8b4a563a94080e982a6c ]

Add ti,syscon-unaligned-access property to PCIe RC nodes to set
appropriate bits in CTRL_CORE_SMA_SW_7 register to enable workaround for
errata i870.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/dra7.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 0bf354024ef55..3af1aa7a3213d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -314,6 +314,7 @@
 						<0 0 0 2 &pcie1_intc 2>,
 						<0 0 0 3 &pcie1_intc 3>,
 						<0 0 0 4 &pcie1_intc 4>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
 				status = "disabled";
 				pcie1_intc: interrupt-controller {
 					interrupt-controller;
@@ -367,6 +368,7 @@
 						<0 0 0 2 &pcie2_intc 2>,
 						<0 0 0 3 &pcie2_intc 3>,
 						<0 0 0 4 &pcie2_intc 4>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
 				pcie2_intc: interrupt-controller {
 					interrupt-controller;
 					#address-cells = <0>;
-- 
2.20.1

[PATCH AUTOSEL 4.14 004/115] ARM: dts: omap5: enable OTG role for DWC3 controller

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit 656c1a65ab555ee5c7cd0d6aee8ab82ca3c1795f ]

Since SMPS10 and OTG cable detection extcon are described here, and
work to enable OTG power when an OTG cable is plugged in, we can
define OTG mode in the controller (which is disabled by default in
omap5.dtsi).

Tested on OMAP5EVM and Pyra.

Suggested-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap5-board-common.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 7824b2631cb6b..f65343f8e1d69 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -694,6 +694,10 @@
 	vbus-supply = <&smps10_out1_reg>;
 };
 
+&dwc3 {
+	dr_mode = "otg";
+};
+
 &mcspi1 {
 
 };
-- 
2.20.1

[PATCH AUTOSEL 4.14 005/115] net: hns3: Fix for netdev not up problem when setting mtu

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 93d8daf460183871a965dae339839d9e35d44309 ]

Currently hns3_nic_change_mtu will try to down the netdev before
setting mtu, and it does not up the netdev when the setting fails,
which causes netdev not up problem.

This patch fixes it by not returning when the setting fails.

Fixes: a8e8b7ff3517 ("net: hns3: Add support to change MTU in HNS3 hardware")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
index 69726908e72c4..5483cb23c08a3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c
@@ -1307,13 +1307,11 @@ static int hns3_nic_change_mtu(struct net_device *netdev, int new_mtu)
 	}
 
 	ret = h->ae_algo->ops->set_mtu(h, new_mtu);
-	if (ret) {
+	if (ret)
 		netdev_err(netdev, "failed to change MTU in hardware %d\n",
 			   ret);
-		return ret;
-	}
-
-	netdev->mtu = new_mtu;
+	else
+		netdev->mtu = new_mtu;
 
 	/* if the netdev was running earlier, bring it up again */
 	if (if_running && hns3_nic_net_open(netdev))
-- 
2.20.1

[PATCH AUTOSEL 4.14 006/115] f2fs: return correct errno in f2fs_gc

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 61f7725aa148ee870436a29d3a24d5c00ab7e9af ]

This fixes overriding error number in f2fs_gc.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/gc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index ceb6023786bdf..67120181dc2af 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1091,7 +1091,7 @@ int f2fs_gc(struct f2fs_sb_info *sbi, bool sync,
 
 	put_gc_inode(&gc_list);
 
-	if (sync)
+	if (sync && !ret)
 		ret = sec_freed ? 0 : -EAGAIN;
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 007/115] ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block

[Sasha Levin]

From: Philipp Rossak <embed3d@gmail.com>

[ Upstream commit 6c700289a3e84d5d3f2a95cf27732a7f7fce105b ]

The size of the register should be the size of the whole memory block,
not just the registers, that are needed.

Signed-off-by: Philipp Rossak <embed3d@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 11240a8313c26..03f37081fc64e 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -594,7 +594,7 @@
 			clock-names = "apb", "ir";
 			resets = <&r_ccu RST_APB0_IR>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x01f02000 0x40>;
+			reg = <0x01f02000 0x400>;
 			status = "disabled";
 		};
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 008/115] SUNRPC: Fix priority queue fairness

[Sasha Levin]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit f42f7c283078ce3c1e8368b140e270755b1ae313 ]

Fix up the priority queue to not batch by owner, but by queue, so that
we allow '1 << priority' elements to be dequeued before switching to
the next priority queue.
The owner field is still used to wake up requests in round robin order
by owner to avoid single processes hogging the RPC layer by loading the
queues.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sunrpc/sched.h |   2 -
 net/sunrpc/sched.c           | 109 +++++++++++++++++------------------
 2 files changed, 54 insertions(+), 57 deletions(-)

diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index d96e74e114c06..c9548a63d09bb 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -188,7 +188,6 @@ struct rpc_timer {
 struct rpc_wait_queue {
 	spinlock_t		lock;
 	struct list_head	tasks[RPC_NR_PRIORITY];	/* task queue for each priority level */
-	pid_t			owner;			/* process id of last task serviced */
 	unsigned char		maxpriority;		/* maximum priority (0 if queue is not a priority queue) */
 	unsigned char		priority;		/* current priority */
 	unsigned char		nr;			/* # tasks remaining for cookie */
@@ -204,7 +203,6 @@ struct rpc_wait_queue {
  * from a single cookie.  The aim is to improve
  * performance of NFS operations such as read/write.
  */
-#define RPC_BATCH_COUNT			16
 #define RPC_IS_PRIORITY(q)		((q)->maxpriority > 0)
 
 /*
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index f9db5fe52d367..aff76fb434300 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -99,64 +99,78 @@ __rpc_add_timer(struct rpc_wait_queue *queue, struct rpc_task *task)
 	list_add(&task->u.tk_wait.timer_list, &queue->timer_list.list);
 }
 
-static void rpc_rotate_queue_owner(struct rpc_wait_queue *queue)
-{
-	struct list_head *q = &queue->tasks[queue->priority];
-	struct rpc_task *task;
-
-	if (!list_empty(q)) {
-		task = list_first_entry(q, struct rpc_task, u.tk_wait.list);
-		if (task->tk_owner == queue->owner)
-			list_move_tail(&task->u.tk_wait.list, q);
-	}
-}
-
 static void rpc_set_waitqueue_priority(struct rpc_wait_queue *queue, int priority)
 {
 	if (queue->priority != priority) {
-		/* Fairness: rotate the list when changing priority */
-		rpc_rotate_queue_owner(queue);
 		queue->priority = priority;
+		queue->nr = 1U << priority;
 	}
 }
 
-static void rpc_set_waitqueue_owner(struct rpc_wait_queue *queue, pid_t pid)
-{
-	queue->owner = pid;
-	queue->nr = RPC_BATCH_COUNT;
-}
-
 static void rpc_reset_waitqueue_priority(struct rpc_wait_queue *queue)
 {
 	rpc_set_waitqueue_priority(queue, queue->maxpriority);
-	rpc_set_waitqueue_owner(queue, 0);
 }
 
 /*
- * Add new request to a priority queue.
+ * Add a request to a queue list
  */
-static void __rpc_add_wait_queue_priority(struct rpc_wait_queue *queue,
-		struct rpc_task *task,
-		unsigned char queue_priority)
+static void
+__rpc_list_enqueue_task(struct list_head *q, struct rpc_task *task)
 {
-	struct list_head *q;
 	struct rpc_task *t;
 
-	INIT_LIST_HEAD(&task->u.tk_wait.links);
-	if (unlikely(queue_priority > queue->maxpriority))
-		queue_priority = queue->maxpriority;
-	if (queue_priority > queue->priority)
-		rpc_set_waitqueue_priority(queue, queue_priority);
-	q = &queue->tasks[queue_priority];
 	list_for_each_entry(t, q, u.tk_wait.list) {
 		if (t->tk_owner == task->tk_owner) {
-			list_add_tail(&task->u.tk_wait.list, &t->u.tk_wait.links);
+			list_add_tail(&task->u.tk_wait.links,
+					&t->u.tk_wait.links);
+			/* Cache the queue head in task->u.tk_wait.list */
+			task->u.tk_wait.list.next = q;
+			task->u.tk_wait.list.prev = NULL;
 			return;
 		}
 	}
+	INIT_LIST_HEAD(&task->u.tk_wait.links);
 	list_add_tail(&task->u.tk_wait.list, q);
 }
 
+/*
+ * Remove request from a queue list
+ */
+static void
+__rpc_list_dequeue_task(struct rpc_task *task)
+{
+	struct list_head *q;
+	struct rpc_task *t;
+
+	if (task->u.tk_wait.list.prev == NULL) {
+		list_del(&task->u.tk_wait.links);
+		return;
+	}
+	if (!list_empty(&task->u.tk_wait.links)) {
+		t = list_first_entry(&task->u.tk_wait.links,
+				struct rpc_task,
+				u.tk_wait.links);
+		/* Assume __rpc_list_enqueue_task() cached the queue head */
+		q = t->u.tk_wait.list.next;
+		list_add_tail(&t->u.tk_wait.list, q);
+		list_del(&task->u.tk_wait.links);
+	}
+	list_del(&task->u.tk_wait.list);
+}
+
+/*
+ * Add new request to a priority queue.
+ */
+static void __rpc_add_wait_queue_priority(struct rpc_wait_queue *queue,
+		struct rpc_task *task,
+		unsigned char queue_priority)
+{
+	if (unlikely(queue_priority > queue->maxpriority))
+		queue_priority = queue->maxpriority;
+	__rpc_list_enqueue_task(&queue->tasks[queue_priority], task);
+}
+
 /*
  * Add new request to wait queue.
  *
@@ -194,13 +208,7 @@ static void __rpc_add_wait_queue(struct rpc_wait_queue *queue,
  */
 static void __rpc_remove_wait_queue_priority(struct rpc_task *task)
 {
-	struct rpc_task *t;
-
-	if (!list_empty(&task->u.tk_wait.links)) {
-		t = list_entry(task->u.tk_wait.links.next, struct rpc_task, u.tk_wait.list);
-		list_move(&t->u.tk_wait.list, &task->u.tk_wait.list);
-		list_splice_init(&task->u.tk_wait.links, &t->u.tk_wait.links);
-	}
+	__rpc_list_dequeue_task(task);
 }
 
 /*
@@ -212,7 +220,8 @@ static void __rpc_remove_wait_queue(struct rpc_wait_queue *queue, struct rpc_tas
 	__rpc_disable_timer(queue, task);
 	if (RPC_IS_PRIORITY(queue))
 		__rpc_remove_wait_queue_priority(task);
-	list_del(&task->u.tk_wait.list);
+	else
+		list_del(&task->u.tk_wait.list);
 	queue->qlen--;
 	dprintk("RPC: %5u removed from queue %p \"%s\"\n",
 			task->tk_pid, queue, rpc_qname(queue));
@@ -481,17 +490,9 @@ static struct rpc_task *__rpc_find_next_queued_priority(struct rpc_wait_queue *q
 	 * Service a batch of tasks from a single owner.
 	 */
 	q = &queue->tasks[queue->priority];
-	if (!list_empty(q)) {
-		task = list_entry(q->next, struct rpc_task, u.tk_wait.list);
-		if (queue->owner == task->tk_owner) {
-			if (--queue->nr)
-				goto out;
-			list_move_tail(&task->u.tk_wait.list, q);
-		}
-		/*
-		 * Check if we need to switch queues.
-		 */
-		goto new_owner;
+	if (!list_empty(q) && --queue->nr) {
+		task = list_first_entry(q, struct rpc_task, u.tk_wait.list);
+		goto out;
 	}
 
 	/*
@@ -503,7 +504,7 @@ static struct rpc_task *__rpc_find_next_queued_priority(struct rpc_wait_queue *q
 		else
 			q = q - 1;
 		if (!list_empty(q)) {
-			task = list_entry(q->next, struct rpc_task, u.tk_wait.list);
+			task = list_first_entry(q, struct rpc_task, u.tk_wait.list);
 			goto new_queue;
 		}
 	} while (q != &queue->tasks[queue->priority]);
@@ -513,8 +514,6 @@ static struct rpc_task *__rpc_find_next_queued_priority(struct rpc_wait_queue *q
 
 new_queue:
 	rpc_set_waitqueue_priority(queue, (unsigned int)(q - &queue->tasks[0]));
-new_owner:
-	rpc_set_waitqueue_owner(queue, task->tk_owner);
 out:
 	return task;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 009/115] IB/hfi1: Ensure ucast_dlid access doesnt exceed bounds

[Sasha Levin]

From: Dennis Dalessandro <dennis.dalessandro@intel.com>

[ Upstream commit 3144533bf667c8e53bb20656b78295960073e57b ]

The dlid assignment made by looking into the u_ucast_dlid array does not
do an explicit check for the size of the array. The code path to arrive at
def_port, the index value is long and complicated so its best to just have
an explicit check here.

Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.c b/drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.c
index a72278e9cd274..9c8ddaaa6fbbf 100644
--- a/drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.c
+++ b/drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.c
@@ -351,7 +351,8 @@ static uint32_t opa_vnic_get_dlid(struct opa_vnic_adapter *adapter,
 			if (unlikely(!dlid))
 				v_warn("Null dlid in MAC address\n");
 		} else if (def_port != OPA_VNIC_INVALID_PORT) {
-			dlid = info->vesw.u_ucast_dlid[def_port];
+			if (def_port < OPA_VESW_MAX_NUM_DEF_PORT)
+				dlid = info->vesw.u_ucast_dlid[def_port];
 		}
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 010/115] iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()

[Sasha Levin]

From: Robin Murphy <robin.murphy@arm.com>

[ Upstream commit 85c7a0f1ef624ef58173ef52ea77780257bdfe04 ]

In removing the pagetable-wide lock, we gained the possibility of the
vanishingly unlikely case where we have a race between two concurrent
unmappers splitting the same block entry. The logic to handle this is
fairly straightforward - whoever loses the race frees their partial
next-level table and instead dereferences the winner's newly-installed
entry in order to fall back to a regular unmap, which intentionally
echoes the pre-existing case of recursively splitting a 1GB block down
to 4KB pages by installing a full table of 2MB blocks first.

Unfortunately, the chump who implemented that logic failed to update the
condition check for that fallback, meaning that if said race occurs at
the last level (where the loser's unmap_idx is valid) then the unmap
won't actually happen. Fix that to properly account for both the race
and recursive cases.

Fixes: 2c3d273eabe8 ("iommu/io-pgtable-arm: Support lockless operation")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: re-jig control flow to avoid duplicate cmpxchg test]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/io-pgtable-arm.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
index e8018a308868e..17a9225283dd1 100644
--- a/drivers/iommu/io-pgtable-arm.c
+++ b/drivers/iommu/io-pgtable-arm.c
@@ -551,13 +551,12 @@ static int arm_lpae_split_blk_unmap(struct arm_lpae_io_pgtable *data,
 			return 0;
 
 		tablep = iopte_deref(pte, data);
+	} else if (unmap_idx >= 0) {
+		io_pgtable_tlb_add_flush(&data->iop, iova, size, size, true);
+		return size;
 	}
 
-	if (unmap_idx < 0)
-		return __arm_lpae_unmap(data, iova, size, lvl, tablep);
-
-	io_pgtable_tlb_add_flush(&data->iop, iova, size, size, true);
-	return size;
+	return __arm_lpae_unmap(data, iova, size, lvl, tablep);
 }
 
 static int __arm_lpae_unmap(struct arm_lpae_io_pgtable *data,
-- 
2.20.1

[PATCH AUTOSEL 4.14 011/115] kvm: arm/arm64: Fix stage2_flush_memslot for 4 level page table

[Sasha Levin]

From: Suzuki K Poulose <suzuki.poulose@arm.com>

[ Upstream commit d2db7773ba864df6b4e19643dfc54838550d8049 ]

So far we have only supported 3 level page table with fixed IPA of
40bits, where PUD is folded. With 4 level page tables, we need
to check if the PUD entry is valid or not. Fix stage2_flush_memslot()
to do this check, before walking down the table.

Acked-by: Christoffer Dall <cdall@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 virt/kvm/arm/mmu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c
index 1f4cac53b9234..9f69202d8e49b 100644
--- a/virt/kvm/arm/mmu.c
+++ b/virt/kvm/arm/mmu.c
@@ -375,7 +375,8 @@ static void stage2_flush_memslot(struct kvm *kvm,
 	pgd = kvm->arch.pgd + stage2_pgd_index(addr);
 	do {
 		next = stage2_pgd_addr_end(addr, end);
-		stage2_flush_puds(kvm, pgd, addr, next);
+		if (!stage2_pgd_none(*pgd))
+			stage2_flush_puds(kvm, pgd, addr, next);
 	} while (pgd++, addr = next, addr != end);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 012/115] arm64/numa: Report correct memblock range for the dummy node

[Sasha Levin]

From: Anshuman Khandual <anshuman.khandual@arm.com>

[ Upstream commit 77cfe950901e5c13aca2df6437a05f39dd9a929b ]

The dummy node ID is marked into all memory ranges on the system. So the
dummy node really extends the entire memblock.memory. Hence report correct
extent information for the dummy node using memblock range helper functions
instead of the range [0LLU, PFN_PHYS(max_pfn) - 1)].

Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms")
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/mm/numa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c
index dad128ba98bf8..e9c843e0c1727 100644
--- a/arch/arm64/mm/numa.c
+++ b/arch/arm64/mm/numa.c
@@ -419,7 +419,7 @@ static int __init dummy_numa_init(void)
 	if (numa_off)
 		pr_info("NUMA disabled\n"); /* Forced off on command line. */
 	pr_info("Faking a node at [mem %#018Lx-%#018Lx]\n",
-		0LLU, PFN_PHYS(max_pfn) - 1);
+		memblock_start_of_DRAM(), memblock_end_of_DRAM() - 1);
 
 	for_each_memblock(memory, mblk) {
 		ret = numa_add_memblk(0, mblk->base, mblk->base + mblk->size);
-- 
2.20.1

[PATCH AUTOSEL 4.14 013/115] ath10k: fix vdev-start timeout on error

[Sasha Levin]

From: Ben Greear <greearb@candelatech.com>

[ Upstream commit 833fd34d743c728afe6d127ef7bee67e7d9199a8 ]

The vdev-start-response message should cause the
completion to fire, even in the error case.  Otherwise,
the user still gets no useful information and everything
is blocked until the timeout period.

Add some warning text to print out the invalid status
code to aid debugging, and propagate failure code.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/core.h |  1 +
 drivers/net/wireless/ath/ath10k/mac.c  |  2 +-
 drivers/net/wireless/ath/ath10k/wmi.c  | 19 ++++++++++++++++---
 drivers/net/wireless/ath/ath10k/wmi.h  |  8 +++++++-
 4 files changed, 25 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 949ebb3e967bb..be9ec265dfe55 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -881,6 +881,7 @@ struct ath10k {
 
 	struct completion install_key_done;
 
+	int last_wmi_vdev_start_status;
 	struct completion vdev_setup_done;
 
 	struct workqueue_struct *workqueue;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 58a3c42c4aedb..259ef6a0d1740 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -954,7 +954,7 @@ static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
 	if (time_left == 0)
 		return -ETIMEDOUT;
 
-	return 0;
+	return ar->last_wmi_vdev_start_status;
 }
 
 static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index ab8eb9cdfda0f..c29e908c97317 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3132,18 +3132,31 @@ void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct wmi_vdev_start_ev_arg arg = {};
 	int ret;
+	u32 status;
 
 	ath10k_dbg(ar, ATH10K_DBG_WMI, "WMI_VDEV_START_RESP_EVENTID\n");
 
+	ar->last_wmi_vdev_start_status = 0;
+
 	ret = ath10k_wmi_pull_vdev_start(ar, skb, &arg);
 	if (ret) {
 		ath10k_warn(ar, "failed to parse vdev start event: %d\n", ret);
-		return;
+		ar->last_wmi_vdev_start_status = ret;
+		goto out;
 	}
 
-	if (WARN_ON(__le32_to_cpu(arg.status)))
-		return;
+	status = __le32_to_cpu(arg.status);
+	if (WARN_ON_ONCE(status)) {
+		ath10k_warn(ar, "vdev-start-response reports status error: %d (%s)\n",
+			    status, (status == WMI_VDEV_START_CHAN_INVALID) ?
+			    "chan-invalid" : "unknown");
+		/* Setup is done one way or another though, so we should still
+		 * do the completion, so don't return here.
+		 */
+		ar->last_wmi_vdev_start_status = -EINVAL;
+	}
 
+out:
 	complete(&ar->vdev_setup_done);
 }
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index d0e05aa437e36..947b74c64fec0 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -6480,11 +6480,17 @@ struct wmi_ch_info_ev_arg {
 	__le32 rx_frame_count;
 };
 
+/* From 10.4 firmware, not sure all have the same values. */
+enum wmi_vdev_start_status {
+	WMI_VDEV_START_OK = 0,
+	WMI_VDEV_START_CHAN_INVALID,
+};
+
 struct wmi_vdev_start_ev_arg {
 	__le32 vdev_id;
 	__le32 req_id;
 	__le32 resp_type; /* %WMI_VDEV_RESP_ */
-	__le32 status;
+	__le32 status; /* See wmi_vdev_start_status enum above */
 };
 
 struct wmi_peer_kick_ev_arg {
-- 
2.20.1

[PATCH AUTOSEL 4.14 014/115] ata: ahci_brcm: Match BCM63138 compatible strings

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit fb8506f15f2e394f5f648575cf48a26e8744390c ]

Match the "brcm,bcm63138-ahci" compatible string in order to allow this
driver to probe on such platforms.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/ahci_brcm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 5936d1679bf3a..0a3998526bb1d 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -297,6 +297,7 @@ static struct scsi_host_template ahci_platform_sht = {
 static const struct of_device_id ahci_of_match[] = {
 	{.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
 	{.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
+	{.compatible = "brcm,bcm63138-ahci", .data = (void *)BRCM_SATA_BCM7445},
 	{.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
 	{},
 };
-- 
2.20.1

[PATCH AUTOSEL 4.14 015/115] ata: ahci_brcm: Allow using driver or DSL SoCs

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 7fb44929cb0e5cdcde143e1ca3ca57b5b8247db0 ]

The Broadcom STB AHCI controller is the same as the one found on DSL
SoCs, so we will utilize the same driver on these systems as well.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index cb5339166563e..229a5ccd6b73b 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -102,7 +102,8 @@ config SATA_AHCI_PLATFORM
 
 config AHCI_BRCM
 	tristate "Broadcom AHCI SATA support"
-	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
+		   ARCH_BCM_63XX
 	help
 	  This option enables support for the AHCI SATA3 controller found on
 	  Broadcom SoC's.
-- 
2.20.1

[PATCH AUTOSEL 4.14 016/115] ath9k: fix reporting calculated new FFT upper max

[Sasha Levin]

From: Simon Wunderlich <sw@simonwunderlich.de>

[ Upstream commit 4fb5837ac2bd46a85620b297002c704e9958f64d ]

Since the debug print code is outside of the loop, it shouldn't use the loop
iterator anymore but instead print the found maximum index.

Cc: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/common-spectral.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.c b/drivers/net/wireless/ath/ath9k/common-spectral.c
index a41bcbda1d9e8..37d5994eb1ccd 100644
--- a/drivers/net/wireless/ath/ath9k/common-spectral.c
+++ b/drivers/net/wireless/ath/ath9k/common-spectral.c
@@ -411,7 +411,7 @@ ath_cmn_process_ht20_40_fft(struct ath_rx_status *rs,
 
 		ath_dbg(common, SPECTRAL_SCAN,
 			"Calculated new upper max 0x%X at %i\n",
-			tmp_mag, i);
+			tmp_mag, fft_sample_40.upper_max_index);
 	} else
 	for (i = dc_pos; i < SPECTRAL_HT20_40_NUM_BINS; i++) {
 		if (fft_sample_40.data[i] == (upper_mag >> max_exp))
-- 
2.20.1

[PATCH AUTOSEL 4.14 017/115] usb: gadget: udc: fotg210-udc: Fix a sleep-in-atomic-context bug in fotg210_get_status()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 2337a77c1cc86bc4e504ecf3799f947659c86026 ]

The driver may sleep in an interrupt handler.
The function call path (from bottom to top) in Linux-4.17 is:

[FUNC] fotg210_ep_queue(GFP_KERNEL)
drivers/usb/gadget/udc/fotg210-udc.c, 744:
	fotg210_ep_queue in fotg210_get_status
drivers/usb/gadget/udc/fotg210-udc.c, 768:
	fotg210_get_status in fotg210_setup_packet
drivers/usb/gadget/udc/fotg210-udc.c, 949:
	fotg210_setup_packet in fotg210_irq (interrupt handler)

To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.
If possible, spin_unlock() and spin_lock() around fotg210_ep_queue()
can be also removed.

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/fotg210-udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index d17d7052605ba..6866a0be249e4 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -744,7 +744,7 @@ static void fotg210_get_status(struct fotg210_udc *fotg210,
 	fotg210->ep0_req->length = 2;
 
 	spin_unlock(&fotg210->lock);
-	fotg210_ep_queue(fotg210->gadget.ep0, fotg210->ep0_req, GFP_KERNEL);
+	fotg210_ep_queue(fotg210->gadget.ep0, fotg210->ep0_req, GFP_ATOMIC);
 	spin_lock(&fotg210->lock);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 018/115] usb: dwc3: gadget: Check ENBLSLPM before sending ep command

[Sasha Levin]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit 87dd96111b0bb8e616fcbd74dbf4bb4182f2c596 ]

When operating in USB 2.0 speeds (HS/FS), if GUSB2PHYCFG.ENBLSLPM or
GUSB2PHYCFG.SUSPHY is set, it must be cleared before issuing an endpoint
command.

Current implementation only save and restore GUSB2PHYCFG.SUSPHY
configuration. We must save and clear both GUSB2PHYCFG.ENBLSLPM and
GUSB2PHYCFG.SUSPHY settings. Restore them after the command is
completed.

DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/gadget.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 1b99d44e52b9a..2cc6b2aceedb8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -277,27 +277,36 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
 	struct dwc3		*dwc = dep->dwc;
 	u32			timeout = 1000;
+	u32			saved_config = 0;
 	u32			reg;
 
 	int			cmd_status = 0;
-	int			susphy = false;
 	int			ret = -EINVAL;
 
 	/*
-	 * Synopsys Databook 2.60a states, on section 6.3.2.5.[1-8], that if
-	 * we're issuing an endpoint command, we must check if
-	 * GUSB2PHYCFG.SUSPHY bit is set. If it is, then we need to clear it.
+	 * When operating in USB 2.0 speeds (HS/FS), if GUSB2PHYCFG.ENBLSLPM or
+	 * GUSB2PHYCFG.SUSPHY is set, it must be cleared before issuing an
+	 * endpoint command.
 	 *
-	 * We will also set SUSPHY bit to what it was before returning as stated
-	 * by the same section on Synopsys databook.
+	 * Save and clear both GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY
+	 * settings. Restore them after the command is completed.
+	 *
+	 * DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2
 	 */
 	if (dwc->gadget.speed <= USB_SPEED_HIGH) {
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 		if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
-			susphy = true;
+			saved_config |= DWC3_GUSB2PHYCFG_SUSPHY;
 			reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
-			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 		}
+
+		if (reg & DWC3_GUSB2PHYCFG_ENBLSLPM) {
+			saved_config |= DWC3_GUSB2PHYCFG_ENBLSLPM;
+			reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+		}
+
+		if (saved_config)
+			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 	}
 
 	if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) {
@@ -395,9 +404,9 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 		}
 	}
 
-	if (unlikely(susphy)) {
+	if (saved_config) {
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
-		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+		reg |= saved_config;
 		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 019/115] nl80211: Fix a GET_KEY reply attribute

[Sasha Levin]

From: Andrew Zaborowski <andrew.zaborowski@intel.com>

[ Upstream commit efdfce7270de85a8706d1ea051bef3a7486809ff ]

Use the NL80211_KEY_IDX attribute inside the NL80211_ATTR_KEY in
NL80211_CMD_GET_KEY responses to comply with nl80211_key_policy.
This is unlikely to affect existing userspace.

Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/nl80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 9627c52c3f937..df8c5312f26ad 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3118,7 +3118,7 @@ static void get_key_callback(void *c, struct key_params *params)
 			 params->cipher)))
 		goto nla_put_failure;
 
-	if (nla_put_u8(cookie->msg, NL80211_ATTR_KEY_IDX, cookie->idx))
+	if (nla_put_u8(cookie->msg, NL80211_KEY_IDX, cookie->idx))
 		goto nla_put_failure;
 
 	nla_nest_end(cookie->msg, key);
-- 
2.20.1

[PATCH AUTOSEL 4.14 020/115] irqchip/irq-mvebu-icu: Fix wrong private data retrieval

[Sasha Levin]

From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit 2b4dab69dcca13c5be2ddaf1337ae4accd087de6 ]

The irq_domain structure has an host_data pointer that just stores
private data. It is meant to not be touched by the IRQ core. However,
when it comes to MSI, the MSI layer adds its own private data there
with a structure that also has a host_data pointer.

Because this IRQ domain is an MSI domain, to access private data we
should do a d->host_data->host_data, also wrapped as
'platform_msi_get_host_data()'.

This bug was lying there silently because the 'icu' structure retrieved
this way was just called by dev_err(), only producing a
'(NULL device *):' output on the console.

Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-mvebu-icu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-mvebu-icu.c b/drivers/irqchip/irq-mvebu-icu.c
index e18c48d3a92e7..6a77b9ea8e418 100644
--- a/drivers/irqchip/irq-mvebu-icu.c
+++ b/drivers/irqchip/irq-mvebu-icu.c
@@ -92,7 +92,7 @@ static int
 mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
 			       unsigned long *hwirq, unsigned int *type)
 {
-	struct mvebu_icu *icu = d->host_data;
+	struct mvebu_icu *icu = platform_msi_get_host_data(d);
 	unsigned int icu_group;
 
 	/* Check the count of the parameters in dt */
-- 
2.20.1

[PATCH AUTOSEL 4.14 021/115] watchdog: w83627hf_wdt: Support NCT6796D, NCT6797D, NCT6798D

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 57cbf0e3a0fd48e5ad8f3884562e8dde4827c1c8 ]

The watchdog controller on NCT6796D, NCT6797D, and NCT6798D is compatible
with the wtachdog controller on other Nuvoton chips.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/w83627hf_wdt.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 7817836bff554..4b9365d4de7a9 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -50,7 +50,7 @@ static int cr_wdt_csr;		/* WDT control & status register */
 enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
 	     w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
 	     w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
-	     nct6795, nct6102 };
+	     nct6795, nct6796, nct6102 };
 
 static int timeout;			/* in seconds */
 module_param(timeout, int, 0);
@@ -100,6 +100,7 @@ MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
 #define NCT6792_ID		0xc9
 #define NCT6793_ID		0xd1
 #define NCT6795_ID		0xd3
+#define NCT6796_ID		0xd4	/* also NCT9697D, NCT9698D */
 
 #define W83627HF_WDT_TIMEOUT	0xf6
 #define W83697HF_WDT_TIMEOUT	0xf4
@@ -209,6 +210,7 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
 	case nct6792:
 	case nct6793:
 	case nct6795:
+	case nct6796:
 	case nct6102:
 		/*
 		 * These chips have a fixed WDTO# output pin (W83627UHG),
@@ -407,6 +409,9 @@ static int wdt_find(int addr)
 	case NCT6795_ID:
 		ret = nct6795;
 		break;
+	case NCT6796_ID:
+		ret = nct6796;
+		break;
 	case NCT6102_ID:
 		ret = nct6102;
 		cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
@@ -450,6 +455,7 @@ static int __init wdt_init(void)
 		"NCT6792",
 		"NCT6793",
 		"NCT6795",
+		"NCT6796",
 		"NCT6102",
 	};
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 022/115] KVM: PPC: Inform the userspace about TCE update failures

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit f7960e299f13f069d6f3d4e157d91bfca2669677 ]

We return H_TOO_HARD from TCE update handlers when we think that
the next handler (realmode -> virtual mode -> user mode) has a chance to
handle the request; H_HARDWARE/H_CLOSED otherwise.

This changes the handlers to return H_TOO_HARD on every error giving
the userspace an opportunity to handle any request or at least log
them all.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_64_vio.c    | 8 ++++----
 arch/powerpc/kvm/book3s_64_vio_hv.c | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c
index 2c6cce8e7cfd0..5e44462960213 100644
--- a/arch/powerpc/kvm/book3s_64_vio.c
+++ b/arch/powerpc/kvm/book3s_64_vio.c
@@ -404,7 +404,7 @@ static long kvmppc_tce_iommu_unmap(struct kvm *kvm,
 	long ret;
 
 	if (WARN_ON_ONCE(iommu_tce_xchg(tbl, entry, &hpa, &dir)))
-		return H_HARDWARE;
+		return H_TOO_HARD;
 
 	if (dir == DMA_NONE)
 		return H_SUCCESS;
@@ -434,15 +434,15 @@ long kvmppc_tce_iommu_map(struct kvm *kvm, struct iommu_table *tbl,
 		return H_TOO_HARD;
 
 	if (WARN_ON_ONCE(mm_iommu_ua_to_hpa(mem, ua, tbl->it_page_shift, &hpa)))
-		return H_HARDWARE;
+		return H_TOO_HARD;
 
 	if (mm_iommu_mapped_inc(mem))
-		return H_CLOSED;
+		return H_TOO_HARD;
 
 	ret = iommu_tce_xchg(tbl, entry, &hpa, &dir);
 	if (WARN_ON_ONCE(ret)) {
 		mm_iommu_mapped_dec(mem);
-		return H_HARDWARE;
+		return H_TOO_HARD;
 	}
 
 	if (dir != DMA_NONE)
diff --git a/arch/powerpc/kvm/book3s_64_vio_hv.c b/arch/powerpc/kvm/book3s_64_vio_hv.c
index 23d6d1592f117..c75e5664fe3d8 100644
--- a/arch/powerpc/kvm/book3s_64_vio_hv.c
+++ b/arch/powerpc/kvm/book3s_64_vio_hv.c
@@ -264,14 +264,14 @@ static long kvmppc_rm_tce_iommu_map(struct kvm *kvm, struct iommu_table *tbl,
 
 	if (WARN_ON_ONCE_RM(mm_iommu_ua_to_hpa_rm(mem, ua, tbl->it_page_shift,
 			&hpa)))
-		return H_HARDWARE;
+		return H_TOO_HARD;
 
 	pua = (void *) vmalloc_to_phys(pua);
 	if (WARN_ON_ONCE_RM(!pua))
 		return H_HARDWARE;
 
 	if (WARN_ON_ONCE_RM(mm_iommu_mapped_inc(mem)))
-		return H_CLOSED;
+		return H_TOO_HARD;
 
 	ret = iommu_tce_xchg_rm(tbl, entry, &hpa, &dir);
 	if (ret) {
@@ -448,7 +448,7 @@ long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu,
 
 		rmap = (void *) vmalloc_to_phys(rmap);
 		if (WARN_ON_ONCE_RM(!rmap))
-			return H_HARDWARE;
+			return H_TOO_HARD;
 
 		/*
 		 * Synchronize with the MMU notifier callbacks in
-- 
2.20.1

[PATCH AUTOSEL 4.14 023/115] dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 9524d6b265f9b2b9a61fceb2ee2ce1c2a83e39ca ]

Clang warns when implicitly converting from one enumerated type to
another. Avoid this by using the equivalent value from the expected
type.

In file included from drivers/dma/ep93xx_dma.c:30:
./include/linux/platform_data/dma-ep93xx.h:88:10: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                return DMA_NONE;
                ~~~~~~ ^~~~~~~~
1 warning generated.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/platform_data/dma-ep93xx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h
index f8f1f6b952a62..eb9805bb3fe8a 100644
--- a/include/linux/platform_data/dma-ep93xx.h
+++ b/include/linux/platform_data/dma-ep93xx.h
@@ -85,7 +85,7 @@ static inline enum dma_transfer_direction
 ep93xx_dma_chan_direction(struct dma_chan *chan)
 {
 	if (!ep93xx_dma_chan_is_m2p(chan))
-		return DMA_NONE;
+		return DMA_TRANS_NONE;
 
 	/* even channels are for TX, odd for RX */
 	return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
-- 
2.20.1

[PATCH AUTOSEL 4.14 024/115] dmaengine: timb_dma: Use proper enum in td_prep_slave_sg

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 5e621f5d538985f010035c6f3e28c22829d36db1 ]

Clang warns when implicitly converting from one enumerated type to
another. Avoid this by using the equivalent value from the expected
type.

drivers/dma/timb_dma.c:548:27: warning: implicit conversion from
enumeration type 'enum dma_transfer_direction' to different enumeration
type 'enum dma_data_direction' [-Wenum-conversion]
                td_desc->desc_list_len, DMA_MEM_TO_DEV);
                                        ^~~~~~~~~~~~~~
1 warning generated.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/timb_dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c
index 896bafb7a5324..cf6588cc3efdc 100644
--- a/drivers/dma/timb_dma.c
+++ b/drivers/dma/timb_dma.c
@@ -545,7 +545,7 @@ static struct dma_async_tx_descriptor *td_prep_slave_sg(struct dma_chan *chan,
 	}
 
 	dma_sync_single_for_device(chan2dmadev(chan), td_desc->txd.phys,
-		td_desc->desc_list_len, DMA_MEM_TO_DEV);
+		td_desc->desc_list_len, DMA_TO_DEVICE);
 
 	return &td_desc->txd;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 025/115] ext4: fix build error when DX_DEBUG is defined

[Sasha Levin]

From: Gabriel Krisman Bertazi <krisman@collabora.co.uk>

[ Upstream commit 799578ab16e86b074c184ec5abbda0bc698c7b0b ]

Enabling DX_DEBUG triggers the build error below.  info is an attribute
of  the dxroot structure.

linux/fs/ext4/namei.c:2264:12: error: ‘info’
undeclared (first use in this function); did you mean ‘insl’?
	   	  info->indirect_levels));

Fixes: e08ac99fa2a2 ("ext4: add largedir feature")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/namei.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 162e853dc5d65..212b01861d941 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2293,7 +2293,7 @@ static int ext4_dx_add_entry(handle_t *handle, struct ext4_filename *fname,
 			dxroot->info.indirect_levels += 1;
 			dxtrace(printk(KERN_DEBUG
 				       "Creating %d level index...\n",
-				       info->indirect_levels));
+				       dxroot->info.indirect_levels));
 			err = ext4_handle_dirty_dx_node(handle, dir, frame->bh);
 			if (err)
 				goto journal_error;
-- 
2.20.1

[PATCH AUTOSEL 4.14 026/115] clk: keystone: Enable TISCI clocks if K3_ARCH

[Sasha Levin]

From: Nishanth Menon <nm@ti.com>

[ Upstream commit 2f149e6e14bcb5e581e49307b54aafcd6f74a74f ]

K3_ARCH uses TISCI for clocks as well. Enable the same
for the driver support.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/Makefile         | 1 +
 drivers/clk/keystone/Kconfig | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f7f761b02beda..8ca03d9d693b0 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_ARCH_HISI)			+= hisilicon/
 obj-y					+= imgtec/
 obj-$(CONFIG_ARCH_MXC)			+= imx/
 obj-$(CONFIG_MACH_INGENIC)		+= ingenic/
+obj-$(CONFIG_ARCH_K3)			+= keystone/
 obj-$(CONFIG_ARCH_KEYSTONE)		+= keystone/
 obj-$(CONFIG_MACH_LOONGSON32)		+= loongson1/
 obj-$(CONFIG_ARCH_MEDIATEK)		+= mediatek/
diff --git a/drivers/clk/keystone/Kconfig b/drivers/clk/keystone/Kconfig
index 7e9f0176578a6..b04927d06cd10 100644
--- a/drivers/clk/keystone/Kconfig
+++ b/drivers/clk/keystone/Kconfig
@@ -7,7 +7,7 @@ config COMMON_CLK_KEYSTONE
 
 config TI_SCI_CLK
 	tristate "TI System Control Interface clock drivers"
-	depends on (ARCH_KEYSTONE || COMPILE_TEST) && OF
+	depends on (ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST) && OF
 	depends on TI_SCI_PROTOCOL
 	default ARCH_KEYSTONE
 	---help---
-- 
2.20.1

[PATCH AUTOSEL 4.14 027/115] sunrpc: Fix connect metrics

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 3968a8a5310404c2f0b9e4d9f28cab13a12bc4fd ]

For TCP, the logic in xprt_connect_status is currently never invoked
to record a successful connection. Commit 2a4919919a97 ("SUNRPC:
Return EAGAIN instead of ENOTCONN when waking up xprt->pending")
changed the way TCP xprt's are awoken after a connect succeeds.

Instead, change connection-oriented transports to bump connect_count
and compute connect_time the moment that XPRT_CONNECTED is set.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprt.c               | 14 ++++----------
 net/sunrpc/xprtrdma/transport.c |  6 +++++-
 net/sunrpc/xprtsock.c           | 10 ++++++----
 3 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index d0282cc88b145..b852c34bb6373 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -795,17 +795,11 @@ void xprt_connect(struct rpc_task *task)
 
 static void xprt_connect_status(struct rpc_task *task)
 {
-	struct rpc_xprt	*xprt = task->tk_rqstp->rq_xprt;
-
-	if (task->tk_status == 0) {
-		xprt->stat.connect_count++;
-		xprt->stat.connect_time += (long)jiffies - xprt->stat.connect_start;
+	switch (task->tk_status) {
+	case 0:
 		dprintk("RPC: %5u xprt_connect_status: connection established\n",
 				task->tk_pid);
-		return;
-	}
-
-	switch (task->tk_status) {
+		break;
 	case -ECONNREFUSED:
 	case -ECONNRESET:
 	case -ECONNABORTED:
@@ -822,7 +816,7 @@ static void xprt_connect_status(struct rpc_task *task)
 	default:
 		dprintk("RPC: %5u xprt_connect_status: error %d connecting to "
 				"server %s\n", task->tk_pid, -task->tk_status,
-				xprt->servername);
+				task->tk_rqstp->rq_xprt->servername);
 		task->tk_status = -EIO;
 	}
 }
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 8cf5ccfe180d3..b1b40a1be8c57 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -238,8 +238,12 @@ rpcrdma_connect_worker(struct work_struct *work)
 	if (++xprt->connect_cookie == 0)	/* maintain a reserved value */
 		++xprt->connect_cookie;
 	if (ep->rep_connected > 0) {
-		if (!xprt_test_and_set_connected(xprt))
+		if (!xprt_test_and_set_connected(xprt)) {
+			xprt->stat.connect_count++;
+			xprt->stat.connect_time += (long)jiffies -
+						   xprt->stat.connect_start;
 			xprt_wake_pending_tasks(xprt, 0);
+		}
 	} else {
 		if (xprt_test_and_clear_connected(xprt))
 			xprt_wake_pending_tasks(xprt, -ENOTCONN);
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 05a58cc1b0cdb..a42871a59f3b9 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -1592,6 +1592,9 @@ static void xs_tcp_state_change(struct sock *sk)
 			clear_bit(XPRT_SOCK_CONNECTING, &transport->sock_state);
 			xprt_clear_connecting(xprt);
 
+			xprt->stat.connect_count++;
+			xprt->stat.connect_time += (long)jiffies -
+						   xprt->stat.connect_start;
 			xprt_wake_pending_tasks(xprt, -EAGAIN);
 		}
 		spin_unlock(&xprt->transport_lock);
@@ -2008,8 +2011,6 @@ static int xs_local_finish_connecting(struct rpc_xprt *xprt,
 	}
 
 	/* Tell the socket layer to start connecting... */
-	xprt->stat.connect_count++;
-	xprt->stat.connect_start = jiffies;
 	return kernel_connect(sock, xs_addr(xprt), xprt->addrlen, 0);
 }
 
@@ -2041,6 +2042,9 @@ static int xs_local_setup_socket(struct sock_xprt *transport)
 	case 0:
 		dprintk("RPC:       xprt %p connected to %s\n",
 				xprt, xprt->address_strings[RPC_DISPLAY_ADDR]);
+		xprt->stat.connect_count++;
+		xprt->stat.connect_time += (long)jiffies -
+					   xprt->stat.connect_start;
 		xprt_set_connected(xprt);
 	case -ENOBUFS:
 		break;
@@ -2361,8 +2365,6 @@ static int xs_tcp_finish_connecting(struct rpc_xprt *xprt, struct socket *sock)
 	xs_set_memalloc(xprt);
 
 	/* Tell the socket layer to start connecting... */
-	xprt->stat.connect_count++;
-	xprt->stat.connect_start = jiffies;
 	set_bit(XPRT_SOCK_CONNECTING, &transport->sock_state);
 	ret = kernel_connect(sock, xs_addr(xprt), xprt->addrlen, O_NONBLOCK);
 	switch (ret) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 028/115] mei: samples: fix a signedness bug in amt_host_if_call()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 185647813cac080453cb73a2e034a8821049f2a7 ]

"out_buf_sz" needs to be signed for the error handling to work.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/mei/mei-amt-version.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/samples/mei/mei-amt-version.c b/samples/mei/mei-amt-version.c
index bb9988914a563..32234481ad7db 100644
--- a/samples/mei/mei-amt-version.c
+++ b/samples/mei/mei-amt-version.c
@@ -370,7 +370,7 @@ static uint32_t amt_host_if_call(struct amt_host_if *acmd,
 			unsigned int expected_sz)
 {
 	uint32_t in_buf_sz;
-	uint32_t out_buf_sz;
+	ssize_t out_buf_sz;
 	ssize_t written;
 	uint32_t status;
 	struct amt_host_if_resp_header *msg_hdr;
-- 
2.20.1

[PATCH AUTOSEL 4.14 029/115] cxgb4: Use proper enum in cxgb4_dcb_handle_fw_update

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 3b0b8f0d9a259f6a428af63e7a77547325f8e081 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:303:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
                         ? CXGB4_DCB_STATE_FW_ALLSYNCED
                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:304:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
                         : CXGB4_DCB_STATE_FW_INCOMPLETE);
                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.

Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.

CXGB4_DCB_STATE_FW_INCOMPLETE = CXGB4_DCB_INPUT_FW_INCOMPLETE = 2
CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
index 6ee2ed30626bf..306b4b3206168 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
@@ -266,8 +266,8 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap,
 		enum cxgb4_dcb_state_input input =
 			((pcmd->u.dcb.control.all_syncd_pkd &
 			  FW_PORT_CMD_ALL_SYNCD_F)
-			 ? CXGB4_DCB_STATE_FW_ALLSYNCED
-			 : CXGB4_DCB_STATE_FW_INCOMPLETE);
+			 ? CXGB4_DCB_INPUT_FW_ALLSYNCED
+			 : CXGB4_DCB_INPUT_FW_INCOMPLETE);
 
 		if (dcb->dcb_version != FW_PORT_DCB_VER_UNKNOWN) {
 			dcb_running_version = FW_PORT_CMD_DCB_VERSION_G(
-- 
2.20.1

[PATCH AUTOSEL 4.14 030/115] cxgb4: Use proper enum in IEEE_FAUX_SYNC

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 258b6d141878530ba1f8fc44db683822389de914 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:390:4: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
                        IEEE_FAUX_SYNC(dev, dcb);
                        ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h:70:10: note: expanded
from macro 'IEEE_FAUX_SYNC'
                                            CXGB4_DCB_STATE_FW_ALLSYNCED);
                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.

CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h
index ccf24d3dc9824..2c418c405c508 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h
@@ -67,7 +67,7 @@
 	do { \
 		if ((__dcb)->dcb_version == FW_PORT_DCB_VER_IEEE) \
 			cxgb4_dcb_state_fsm((__dev), \
-					    CXGB4_DCB_STATE_FW_ALLSYNCED); \
+					    CXGB4_DCB_INPUT_FW_ALLSYNCED); \
 	} while (0)
 
 /* States we can be in for a port's Data Center Bridging.
-- 
2.20.1

[PATCH AUTOSEL 4.14 031/115] powerpc/pseries: Fix DTL buffer registration

[Sasha Levin]

From: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>

[ Upstream commit db787af1b8a6b4be428ee2ea7d409dafcaa4a43c ]

When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we register the DTL
buffer for a cpu when the associated file under powerpc/dtl in debugfs
is opened. When doing so, we need to set the size of the buffer being
registered in the second u32 word of the buffer. This needs to be in big
endian, but we are not doing the conversion resulting in the below error
showing up in dmesg:

	dtl_start: DTL registration for cpu 0 (hw 0) failed with -4

Fix this in the obvious manner.

Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/dtl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index 18014cdeb590a..c762689e0eb33 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -149,7 +149,7 @@ static int dtl_start(struct dtl *dtl)
 
 	/* Register our dtl buffer with the hypervisor. The HV expects the
 	 * buffer size to be passed in the second word of the buffer */
-	((u32 *)dtl->buf)[1] = DISPATCH_LOG_BYTES;
+	((u32 *)dtl->buf)[1] = cpu_to_be32(DISPATCH_LOG_BYTES);
 
 	hwcpu = get_hard_smp_processor_id(dtl->cpu);
 	addr = __pa(dtl->buf);
-- 
2.20.1

[PATCH AUTOSEL 4.14 032/115] powerpc/pseries: Fix how we iterate over the DTL entries

[Sasha Levin]

From: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>

[ Upstream commit 9258227e9dd1da8feddb07ad9702845546a581c9 ]

When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we look up dtl_idx in
the lppaca to determine the number of entries in the buffer. Since
lppaca is in big endian, we need to do an endian conversion before using
this in our calculation to determine the number of entries in the
buffer. Without this, we do not iterate over the existing entries in the
DTL buffer properly.

Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/dtl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index c762689e0eb33..ef6595153642e 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -184,7 +184,7 @@ static void dtl_stop(struct dtl *dtl)
 
 static u64 dtl_current_index(struct dtl *dtl)
 {
-	return lppaca_of(dtl->cpu).dtl_idx;
+	return be64_to_cpu(lppaca_of(dtl->cpu).dtl_idx);
 }
 #endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 033/115] powerpc/xive: Move a dereference below a NULL test

[Sasha Levin]

From: zhong jiang <zhongjiang@huawei.com>

[ Upstream commit cd5ff94577e004e0a4457e70d0ef3a030f4010b8 ]

Move the dereference of xc below the NULL test.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/sysdev/xive/common.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 818fc5351591c..110d8bb16ebbb 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -1008,12 +1008,13 @@ static void xive_ipi_eoi(struct irq_data *d)
 {
 	struct xive_cpu *xc = __this_cpu_read(xive_cpu);
 
-	DBG_VERBOSE("IPI eoi: irq=%d [0x%lx] (HW IRQ 0x%x) pending=%02x\n",
-		    d->irq, irqd_to_hwirq(d), xc->hw_ipi, xc->pending_prio);
-
 	/* Handle possible race with unplug and drop stale IPIs */
 	if (!xc)
 		return;
+
+	DBG_VERBOSE("IPI eoi: irq=%d [0x%lx] (HW IRQ 0x%x) pending=%02x\n",
+		    d->irq, irqd_to_hwirq(d), xc->hw_ipi, xc->pending_prio);
+
 	xive_do_source_eoi(xc->hw_ipi, &xc->ipi_data);
 	xive_do_queue_eoi(xc);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 034/115] ARM: dts: at91: sama5d4_xplained: fix addressable nand flash size

[Sasha Levin]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

[ Upstream commit df90fc64367ffdb6f1b5c0f0c4940d44832b0174 ]

sama5d4_xplained comes with a 4Gb NAND flash. Increase the rootfs
size to match this limit.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91-sama5d4_xplained.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index cf712444b2c2c..10f2fb9e0ea61 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -240,7 +240,7 @@
 
 						rootfs@800000 {
 							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
+							reg = <0x800000 0x1f800000>;
 						};
 					};
 				};
-- 
2.20.1

[PATCH AUTOSEL 4.14 035/115] ARM: dts: at91: at91sam9x5cm: fix addressable nand flash size

[Sasha Levin]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

[ Upstream commit 6f270d88a0c4a11725afd8fd2001ae408733afbf ]

at91sam9x5cm comes with a 2Gb NAND flash. Fix the rootfs size to
match this limit.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91sam9x5cm.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index bdeaa0b64a5bf..0a673a7082be1 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -88,7 +88,7 @@
 
 						rootfs@800000 {
 							label = "rootfs";
-							reg = <0x800000 0x1f800000>;
+							reg = <0x800000 0x0f800000>;
 						};
 					};
 				};
-- 
2.20.1

[PATCH AUTOSEL 4.14 036/115] mtd: rawnand: sh_flctl: Use proper enum for flctl_dma_fifo0_transfer

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit e2bfa4ca23d9b5a7bdfcf21319fad9b59e38a05c ]

Clang warns when one enumerated type is converted implicitly to another:

drivers/mtd/nand/raw/sh_flctl.c:483:46: warning: implicit conversion
from enumeration type 'enum dma_transfer_direction' to different
enumeration type 'enum dma_data_direction' [-Wenum-conversion]
                flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0)
                ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
drivers/mtd/nand/raw/sh_flctl.c:542:46: warning: implicit conversion
from enumeration type 'enum dma_transfer_direction' to different
enumeration type 'enum dma_data_direction' [-Wenum-conversion]
                flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0)
                ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
2 warnings generated.

Use the proper enums from dma_data_direction to satisfy Clang.

DMA_MEM_TO_DEV = DMA_TO_DEVICE = 1
DMA_DEV_TO_MEM = DMA_FROM_DEVICE = 2

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/sh_flctl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index e7f3c98487e62..43db80e5d994f 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -480,7 +480,7 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
 
 	/* initiate DMA transfer */
 	if (flctl->chan_fifo0_rx && rlen >= 32 &&
-		flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0)
+		flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE) > 0)
 			goto convert;	/* DMA success */
 
 	/* do polling transfer */
@@ -539,7 +539,7 @@ static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
 
 	/* initiate DMA transfer */
 	if (flctl->chan_fifo0_tx && rlen >= 32 &&
-		flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0)
+		flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE) > 0)
 			return;	/* DMA success */
 
 	/* do polling transfer */
-- 
2.20.1

[PATCH AUTOSEL 4.14 037/115] PM / hibernate: Check the success of generating md5 digest before hibernation

[Sasha Levin]

From: Chen Yu <yu.c.chen@intel.com>

[ Upstream commit 749fa17093ff67b31dea864531a3698b6a95c26c ]

Currently if get_e820_md5() fails, then it will hibernate nevertheless.
Actually the error code should be propagated to upper caller so that
the hibernation could be aware of the result and terminates the process
if md5 digest fails.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/power/hibernate_64.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/x86/power/hibernate_64.c b/arch/x86/power/hibernate_64.c
index 9c80966c80bae..692a179b1ba32 100644
--- a/arch/x86/power/hibernate_64.c
+++ b/arch/x86/power/hibernate_64.c
@@ -250,9 +250,9 @@ static int get_e820_md5(struct e820_table *table, void *buf)
 	return ret;
 }
 
-static void hibernation_e820_save(void *buf)
+static int hibernation_e820_save(void *buf)
 {
-	get_e820_md5(e820_table_firmware, buf);
+	return get_e820_md5(e820_table_firmware, buf);
 }
 
 static bool hibernation_e820_mismatch(void *buf)
@@ -272,8 +272,9 @@ static bool hibernation_e820_mismatch(void *buf)
 	return memcmp(result, buf, MD5_DIGEST_SIZE) ? true : false;
 }
 #else
-static void hibernation_e820_save(void *buf)
+static int hibernation_e820_save(void *buf)
 {
+	return 0;
 }
 
 static bool hibernation_e820_mismatch(void *buf)
@@ -318,9 +319,7 @@ int arch_hibernation_header_save(void *addr, unsigned int max_size)
 
 	rdr->magic = RESTORE_MAGIC;
 
-	hibernation_e820_save(rdr->e820_digest);
-
-	return 0;
+	return hibernation_e820_save(rdr->e820_digest);
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.14 038/115] tools: PCI: Fix compilation warnings

[Sasha Levin]

From: Gustavo Pimentel <gustavo.pimentel@synopsys.com>

[ Upstream commit fef31ecaaf2c5c54db85b35e893bf8abec96b93f ]

Current compilation produces the following warnings:

tools/pci/pcitest.c: In function 'run_test':
tools/pci/pcitest.c:56:9: warning: unused variable 'time'
[-Wunused-variable]
  double time;
         ^~~~
tools/pci/pcitest.c:55:25: warning: unused variable 'end'
[-Wunused-variable]
  struct timespec start, end;
                         ^~~
tools/pci/pcitest.c:55:18: warning: unused variable 'start'
[-Wunused-variable]
  struct timespec start, end;
                  ^~~~~
tools/pci/pcitest.c:146:1: warning: control reaches end of non-void
function [-Wreturn-type]
 }
 ^

Fix them:
 - remove unused variables
 - change function return from int to void, since it's not used

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/pci/pcitest.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c
index 9074b477bff0f..8ca1c62bc06db 100644
--- a/tools/pci/pcitest.c
+++ b/tools/pci/pcitest.c
@@ -23,7 +23,6 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <sys/ioctl.h>
-#include <time.h>
 #include <unistd.h>
 
 #include <linux/pcitest.h>
@@ -43,17 +42,15 @@ struct pci_test {
 	unsigned long	size;
 };
 
-static int run_test(struct pci_test *test)
+static void run_test(struct pci_test *test)
 {
 	long ret;
 	int fd;
-	struct timespec start, end;
-	double time;
 
 	fd = open(test->device, O_RDWR);
 	if (fd < 0) {
 		perror("can't open PCI Endpoint Test device");
-		return fd;
+		return;
 	}
 
 	if (test->barnum >= 0 && test->barnum <= 5) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 039/115] clocksource/drivers/sh_cmt: Fixup for 64-bit machines

[Sasha Levin]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

[ Upstream commit 22627c6f3ed3d9d0df13eec3c831b08f8186c38e ]

When trying to use CMT for clockevents on R-Car gen3 SoCs, I noticed
that 'max_delta_ns' for the broadcast timer (CMT) was shown as 1000 in
/proc/timer_list. It turned out that when calculating it, the driver did
1 << 32 (causing what I think was undefined behavior) resulting in a zero
delta, later clamped to 1000 by cev_delta2ns(). The root cause turned out
to be that the driver abused *unsigned long* for the CMT register values
(which are 16/32-bit), so that the calculation of 'ch->max_match_value'
in sh_cmt_setup_channel() used the wrong branch. Using more proper 'u32'
instead fixed 'max_delta_ns' and even fixed the switching an active
clocksource to CMT (which caused the system to turn non-interactive
before).

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/sh_cmt.c | 72 +++++++++++++++++-------------------
 1 file changed, 33 insertions(+), 39 deletions(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index e09e8bf0bb9bf..560541f53c8d9 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -75,18 +75,17 @@ struct sh_cmt_info {
 	enum sh_cmt_model model;
 
 	unsigned long width; /* 16 or 32 bit version of hardware block */
-	unsigned long overflow_bit;
-	unsigned long clear_bits;
+	u32 overflow_bit;
+	u32 clear_bits;
 
 	/* callbacks for CMSTR and CMCSR access */
-	unsigned long (*read_control)(void __iomem *base, unsigned long offs);
+	u32 (*read_control)(void __iomem *base, unsigned long offs);
 	void (*write_control)(void __iomem *base, unsigned long offs,
-			      unsigned long value);
+			      u32 value);
 
 	/* callbacks for CMCNT and CMCOR access */
-	unsigned long (*read_count)(void __iomem *base, unsigned long offs);
-	void (*write_count)(void __iomem *base, unsigned long offs,
-			    unsigned long value);
+	u32 (*read_count)(void __iomem *base, unsigned long offs);
+	void (*write_count)(void __iomem *base, unsigned long offs, u32 value);
 };
 
 struct sh_cmt_channel {
@@ -100,9 +99,9 @@ struct sh_cmt_channel {
 
 	unsigned int timer_bit;
 	unsigned long flags;
-	unsigned long match_value;
-	unsigned long next_match_value;
-	unsigned long max_match_value;
+	u32 match_value;
+	u32 next_match_value;
+	u32 max_match_value;
 	raw_spinlock_t lock;
 	struct clock_event_device ced;
 	struct clocksource cs;
@@ -157,24 +156,22 @@ struct sh_cmt_device {
 #define SH_CMT32_CMCSR_CKS_RCLK1	(7 << 0)
 #define SH_CMT32_CMCSR_CKS_MASK		(7 << 0)
 
-static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs)
+static u32 sh_cmt_read16(void __iomem *base, unsigned long offs)
 {
 	return ioread16(base + (offs << 1));
 }
 
-static unsigned long sh_cmt_read32(void __iomem *base, unsigned long offs)
+static u32 sh_cmt_read32(void __iomem *base, unsigned long offs)
 {
 	return ioread32(base + (offs << 2));
 }
 
-static void sh_cmt_write16(void __iomem *base, unsigned long offs,
-			   unsigned long value)
+static void sh_cmt_write16(void __iomem *base, unsigned long offs, u32 value)
 {
 	iowrite16(value, base + (offs << 1));
 }
 
-static void sh_cmt_write32(void __iomem *base, unsigned long offs,
-			   unsigned long value)
+static void sh_cmt_write32(void __iomem *base, unsigned long offs, u32 value)
 {
 	iowrite32(value, base + (offs << 2));
 }
@@ -236,7 +233,7 @@ static const struct sh_cmt_info sh_cmt_info[] = {
 #define CMCNT 1 /* channel register */
 #define CMCOR 2 /* channel register */
 
-static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_channel *ch)
+static inline u32 sh_cmt_read_cmstr(struct sh_cmt_channel *ch)
 {
 	if (ch->iostart)
 		return ch->cmt->info->read_control(ch->iostart, 0);
@@ -244,8 +241,7 @@ static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_channel *ch)
 		return ch->cmt->info->read_control(ch->cmt->mapbase, 0);
 }
 
-static inline void sh_cmt_write_cmstr(struct sh_cmt_channel *ch,
-				      unsigned long value)
+static inline void sh_cmt_write_cmstr(struct sh_cmt_channel *ch, u32 value)
 {
 	if (ch->iostart)
 		ch->cmt->info->write_control(ch->iostart, 0, value);
@@ -253,39 +249,35 @@ static inline void sh_cmt_write_cmstr(struct sh_cmt_channel *ch,
 		ch->cmt->info->write_control(ch->cmt->mapbase, 0, value);
 }
 
-static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_channel *ch)
+static inline u32 sh_cmt_read_cmcsr(struct sh_cmt_channel *ch)
 {
 	return ch->cmt->info->read_control(ch->ioctrl, CMCSR);
 }
 
-static inline void sh_cmt_write_cmcsr(struct sh_cmt_channel *ch,
-				      unsigned long value)
+static inline void sh_cmt_write_cmcsr(struct sh_cmt_channel *ch, u32 value)
 {
 	ch->cmt->info->write_control(ch->ioctrl, CMCSR, value);
 }
 
-static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_channel *ch)
+static inline u32 sh_cmt_read_cmcnt(struct sh_cmt_channel *ch)
 {
 	return ch->cmt->info->read_count(ch->ioctrl, CMCNT);
 }
 
-static inline void sh_cmt_write_cmcnt(struct sh_cmt_channel *ch,
-				      unsigned long value)
+static inline void sh_cmt_write_cmcnt(struct sh_cmt_channel *ch, u32 value)
 {
 	ch->cmt->info->write_count(ch->ioctrl, CMCNT, value);
 }
 
-static inline void sh_cmt_write_cmcor(struct sh_cmt_channel *ch,
-				      unsigned long value)
+static inline void sh_cmt_write_cmcor(struct sh_cmt_channel *ch, u32 value)
 {
 	ch->cmt->info->write_count(ch->ioctrl, CMCOR, value);
 }
 
-static unsigned long sh_cmt_get_counter(struct sh_cmt_channel *ch,
-					int *has_wrapped)
+static u32 sh_cmt_get_counter(struct sh_cmt_channel *ch, u32 *has_wrapped)
 {
-	unsigned long v1, v2, v3;
-	int o1, o2;
+	u32 v1, v2, v3;
+	u32 o1, o2;
 
 	o1 = sh_cmt_read_cmcsr(ch) & ch->cmt->info->overflow_bit;
 
@@ -305,7 +297,8 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_channel *ch,
 
 static void sh_cmt_start_stop_ch(struct sh_cmt_channel *ch, int start)
 {
-	unsigned long flags, value;
+	unsigned long flags;
+	u32 value;
 
 	/* start stop register shared by multiple timer channels */
 	raw_spin_lock_irqsave(&ch->cmt->lock, flags);
@@ -412,11 +405,11 @@ static void sh_cmt_disable(struct sh_cmt_channel *ch)
 static void sh_cmt_clock_event_program_verify(struct sh_cmt_channel *ch,
 					      int absolute)
 {
-	unsigned long new_match;
-	unsigned long value = ch->next_match_value;
-	unsigned long delay = 0;
-	unsigned long now = 0;
-	int has_wrapped;
+	u32 value = ch->next_match_value;
+	u32 new_match;
+	u32 delay = 0;
+	u32 now = 0;
+	u32 has_wrapped;
 
 	now = sh_cmt_get_counter(ch, &has_wrapped);
 	ch->flags |= FLAG_REPROGRAM; /* force reprogram */
@@ -613,9 +606,10 @@ static struct sh_cmt_channel *cs_to_sh_cmt(struct clocksource *cs)
 static u64 sh_cmt_clocksource_read(struct clocksource *cs)
 {
 	struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
-	unsigned long flags, raw;
+	unsigned long flags;
 	unsigned long value;
-	int has_wrapped;
+	u32 has_wrapped;
+	u32 raw;
 
 	raw_spin_lock_irqsave(&ch->lock, flags);
 	value = ch->total_cycles;
-- 
2.20.1

[PATCH AUTOSEL 4.14 040/115] clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines

[Sasha Levin]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

[ Upstream commit 37e7742c55ba856eaec7e35673ee370f36eb17f3 ]

The driver seems to abuse *unsigned long* not only for the (32-bit)
register values but also for the 'sh_cmt_channel::total_cycles' which
needs to always be 64-bit -- as a result, the clocksource's mask is
needlessly clamped down to 32-bits on the 32-bit machines...

Fixes: 19bdc9d061bc ("clocksource: sh_cmt clocksource support")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/sh_cmt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 560541f53c8d9..3cd62f7c33e30 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -105,7 +105,7 @@ struct sh_cmt_channel {
 	raw_spinlock_t lock;
 	struct clock_event_device ced;
 	struct clocksource cs;
-	unsigned long total_cycles;
+	u64 total_cycles;
 	bool cs_enabled;
 };
 
@@ -607,8 +607,8 @@ static u64 sh_cmt_clocksource_read(struct clocksource *cs)
 {
 	struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
 	unsigned long flags;
-	unsigned long value;
 	u32 has_wrapped;
+	u64 value;
 	u32 raw;
 
 	raw_spin_lock_irqsave(&ch->lock, flags);
@@ -682,7 +682,7 @@ static int sh_cmt_register_clocksource(struct sh_cmt_channel *ch,
 	cs->disable = sh_cmt_clocksource_disable;
 	cs->suspend = sh_cmt_clocksource_suspend;
 	cs->resume = sh_cmt_clocksource_resume;
-	cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
+	cs->mask = CLOCKSOURCE_MASK(sizeof(u64) * 8);
 	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
 	dev_info(&ch->cmt->pdev->dev, "ch%u: used as clock source\n",
-- 
2.20.1

[PATCH AUTOSEL 4.14 041/115] md: allow metadata updates while suspending an array - fix

[Sasha Levin]

From: NeilBrown <neilb@suse.com>

[ Upstream commit 059421e041eb461fb2b3e81c9adaec18ef03ca3c ]

Commit 35bfc52187f6 ("md: allow metadata update while suspending.")
added support for allowing md_check_recovery() to still perform
metadata updates while the array is entering the 'suspended' state.
This is needed to allow the processes of entering the state to
complete.

Unfortunately, the patch doesn't really work.  The test for
"mddev->suspended" at the start of md_check_recovery() means that the
function doesn't try to do anything at all while entering suspend.

This patch moves the code of updating the metadata while suspending to
*before* the test on mddev->suspended.

Reported-by: Jeff Mahoney <jeffm@suse.com>
Fixes: 35bfc52187f6 ("md: allow metadata update while suspending.")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index e529cef5483a8..b942c74f1ce83 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -8736,6 +8736,18 @@ static void md_start_sync(struct work_struct *ws)
  */
 void md_check_recovery(struct mddev *mddev)
 {
+	if (test_bit(MD_ALLOW_SB_UPDATE, &mddev->flags) && mddev->sb_flags) {
+		/* Write superblock - thread that called mddev_suspend()
+		 * holds reconfig_mutex for us.
+		 */
+		set_bit(MD_UPDATING_SB, &mddev->flags);
+		smp_mb__after_atomic();
+		if (test_bit(MD_ALLOW_SB_UPDATE, &mddev->flags))
+			md_update_sb(mddev, 0);
+		clear_bit_unlock(MD_UPDATING_SB, &mddev->flags);
+		wake_up(&mddev->sb_wait);
+	}
+
 	if (mddev->suspended)
 		return;
 
@@ -8896,16 +8908,6 @@ void md_check_recovery(struct mddev *mddev)
 	unlock:
 		wake_up(&mddev->sb_wait);
 		mddev_unlock(mddev);
-	} else if (test_bit(MD_ALLOW_SB_UPDATE, &mddev->flags) && mddev->sb_flags) {
-		/* Write superblock - thread that called mddev_suspend()
-		 * holds reconfig_mutex for us.
-		 */
-		set_bit(MD_UPDATING_SB, &mddev->flags);
-		smp_mb__after_atomic();
-		if (test_bit(MD_ALLOW_SB_UPDATE, &mddev->flags))
-			md_update_sb(mddev, 0);
-		clear_bit_unlock(MD_UPDATING_SB, &mddev->flags);
-		wake_up(&mddev->sb_wait);
 	}
 }
 EXPORT_SYMBOL(md_check_recovery);
-- 
2.20.1

[PATCH AUTOSEL 4.14 042/115] ixgbe: Fix ixgbe TX hangs with XDP_TX beyond queue limit

[Sasha Levin]

From: Radoslaw Tyl <radoslawx.tyl@intel.com>

[ Upstream commit 8d7179b1e2d64b3493c0114916486fe92e6109a9 ]

We have Tx hang when number Tx and XDP queues are more than 64.
In XDP always is MTQC == 0x0 (64TxQs). We need more space for Tx queues.

Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 01c120d656c54..d1472727ef882 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -3490,12 +3490,18 @@ static void ixgbe_setup_mtqc(struct ixgbe_adapter *adapter)
 		else
 			mtqc |= IXGBE_MTQC_64VF;
 	} else {
-		if (tcs > 4)
+		if (tcs > 4) {
 			mtqc = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ;
-		else if (tcs > 1)
+		} else if (tcs > 1) {
 			mtqc = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ;
-		else
-			mtqc = IXGBE_MTQC_64Q_1PB;
+		} else {
+			u8 max_txq = adapter->num_tx_queues +
+				adapter->num_xdp_queues;
+			if (max_txq > 63)
+				mtqc = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ;
+			else
+				mtqc = IXGBE_MTQC_64Q_1PB;
+		}
 	}
 
 	IXGBE_WRITE_REG(hw, IXGBE_MTQC, mtqc);
-- 
2.20.1

[PATCH AUTOSEL 4.14 043/115] i40e: Use proper enum in i40e_ndo_set_vf_link_state

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 43ade6ad18416b8fd5bb3c9e9789faa666527eec ]

Clang warns when one enumerated type is converted implicitly to another.

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4214:42: warning:
implicit conversion from enumeration type 'enum i40e_aq_link_speed' to
different enumeration type 'enum virtchnl_link_speed'
      [-Wenum-conversion]
                pfe.event_data.link_event.link_speed = I40E_LINK_SPEED_40GB;
                                                     ~ ^~~~~~~~~~~~~~~~~~~~
1 warning generated.

Use the proper enum from virtchnl_link_speed, which has the same value
as I40E_LINK_SPEED_40GB, VIRTCHNL_LINK_SPEED_40GB. This appears to be
missed by commit ff3f4cc267f6 ("virtchnl: finish conversion to virtchnl
interface").

Link: https://github.com/ClangBuiltLinux/linux/issues/81
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index bdb7523216000..ea42240ddace7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -3191,7 +3191,7 @@ int i40e_ndo_set_vf_link_state(struct net_device *netdev, int vf_id, int link)
 		vf->link_forced = true;
 		vf->link_up = true;
 		pfe.event_data.link_event.link_status = true;
-		pfe.event_data.link_event.link_speed = I40E_LINK_SPEED_40GB;
+		pfe.event_data.link_event.link_speed = VIRTCHNL_LINK_SPEED_40GB;
 		break;
 	case IFLA_VF_LINK_STATE_DISABLE:
 		vf->link_forced = true;
-- 
2.20.1

[PATCH AUTOSEL 4.14 044/115] ixgbe: Fix crash with VFs and flow director on interface flap

[Sasha Levin]

From: Radoslaw Tyl <radoslawx.tyl@intel.com>

[ Upstream commit 5d826d209164b0752c883607be4cdbbcf7cab494 ]

This patch fix crash when we have restore flow director filters after reset
adapter. In ixgbe_fdir_filter_restore() filter->action is outside of the
rx_ring array, as it has a VF identifier in the upper 32 bits.

Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index d1472727ef882..4801d96c4fa91 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -5129,6 +5129,7 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct hlist_node *node2;
 	struct ixgbe_fdir_filter *filter;
+	u64 action;
 
 	spin_lock(&adapter->fdir_perfect_lock);
 
@@ -5137,12 +5138,17 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
 
 	hlist_for_each_entry_safe(filter, node2,
 				  &adapter->fdir_filter_list, fdir_node) {
+		action = filter->action;
+		if (action != IXGBE_FDIR_DROP_QUEUE && action != 0)
+			action =
+			(action >> ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF) - 1;
+
 		ixgbe_fdir_write_perfect_filter_82599(hw,
 				&filter->filter,
 				filter->sw_idx,
-				(filter->action == IXGBE_FDIR_DROP_QUEUE) ?
+				(action == IXGBE_FDIR_DROP_QUEUE) ?
 				IXGBE_FDIR_DROP_QUEUE :
-				adapter->rx_ring[filter->action]->reg_idx);
+				adapter->rx_ring[action]->reg_idx);
 	}
 
 	spin_unlock(&adapter->fdir_perfect_lock);
-- 
2.20.1

[PATCH AUTOSEL 4.14 045/115] IB/mthca: Fix error return code in __mthca_init_one()

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 39f2495618c5e980d2873ea3f2d1877dd253e07a ]

Fix to return a negative error code from the mthca_cmd_init() error
handling case instead of 0, as done elsewhere in this function.

Fixes: 80fd8238734c ("[PATCH] IB/mthca: Encapsulate command interface init")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mthca/mthca_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index e36a9bc52268d..ccf50dafce9ca 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -986,7 +986,8 @@ static int __mthca_init_one(struct pci_dev *pdev, int hca_type)
 		goto err_free_dev;
 	}
 
-	if (mthca_cmd_init(mdev)) {
+	err = mthca_cmd_init(mdev);
+	if (err) {
 		mthca_err(mdev, "Failed to init command interface, aborting.\n");
 		goto err_free_dev;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 046/115] IB/mlx4: Avoid implicit enumerated type conversion

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit b56511c15713ba6c7572e77a41f7ddba9c1053ec ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/infiniband/hw/mlx4/mad.c:1811:41: warning: implicit conversion
from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration
type 'enum ib_qp_create_flags' [-Wenum-conversion]
                qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_TUNNEL_QP;
                                                    ~ ^~~~~~~~~~~~~~~~~~~~~~~

drivers/infiniband/hw/mlx4/mad.c:1819:41: warning: implicit conversion
from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration
type 'enum ib_qp_create_flags' [-Wenum-conversion]
                qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_SQP;
                                                    ~ ^~~~~~~~~~~~~~~~~

The type mlx4_ib_qp_flags explicitly provides supplemental values to the
type ib_qp_create_flags. Make that clear to Clang by changing the
create_flags type to u32.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/rdma/ib_verbs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index b8a5118b6a428..f9217a75b4f94 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -1120,7 +1120,7 @@ struct ib_qp_init_attr {
 	struct ib_qp_cap	cap;
 	enum ib_sig_type	sq_sig_type;
 	enum ib_qp_type		qp_type;
-	enum ib_qp_create_flags	create_flags;
+	u32			create_flags;
 
 	/*
 	 * Only needed for special QP types, or when using the RW API.
-- 
2.20.1

[PATCH AUTOSEL 4.14 047/115] ACPICA: Never run _REG on system_memory and system_IO

[Sasha Levin]

From: Bob Moore <robert.moore@intel.com>

[ Upstream commit 8b1cafdcb4b75c5027c52f1e82b47ebe727ad7ed ]

These address spaces are defined by the ACPI spec to be
"always available", and thus _REG should never be run on them.
Provides compatibility with other ACPI implementations.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/acevents.h |  2 ++
 drivers/acpi/acpica/aclocal.h  |  2 +-
 drivers/acpi/acpica/evregion.c | 17 +++++++++++++++--
 drivers/acpi/acpica/evrgnini.c |  6 +-----
 drivers/acpi/acpica/evxfregn.c |  1 -
 5 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index a2adfd42f85cc..bfddcd989974f 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -245,6 +245,8 @@ acpi_ev_default_region_setup(acpi_handle handle,
 
 acpi_status acpi_ev_initialize_region(union acpi_operand_object *region_obj);
 
+u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node);
+
 /*
  * evsci - SCI (System Control Interrupt) handling/dispatch
  */
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 0d45b8bb16789..b10e92de7dd84 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -429,9 +429,9 @@ struct acpi_simple_repair_info {
 /* Info for running the _REG methods */
 
 struct acpi_reg_walk_info {
-	acpi_adr_space_type space_id;
 	u32 function;
 	u32 reg_run_count;
+	acpi_adr_space_type space_id;
 };
 
 /*****************************************************************************
diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c
index 28b447ff92df6..3a3277f982923 100644
--- a/drivers/acpi/acpica/evregion.c
+++ b/drivers/acpi/acpica/evregion.c
@@ -677,6 +677,19 @@ acpi_ev_execute_reg_methods(struct acpi_namespace_node *node,
 
 	ACPI_FUNCTION_TRACE(ev_execute_reg_methods);
 
+	/*
+	 * These address spaces do not need a call to _REG, since the ACPI
+	 * specification defines them as: "must always be accessible". Since
+	 * they never change state (never become unavailable), no need to ever
+	 * call _REG on them. Also, a data_table is not a "real" address space,
+	 * so do not call _REG. September 2018.
+	 */
+	if ((space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) ||
+	    (space_id == ACPI_ADR_SPACE_SYSTEM_IO) ||
+	    (space_id == ACPI_ADR_SPACE_DATA_TABLE)) {
+		return_VOID;
+	}
+
 	info.space_id = space_id;
 	info.function = function;
 	info.reg_run_count = 0;
@@ -738,8 +751,8 @@ acpi_ev_reg_run(acpi_handle obj_handle,
 	}
 
 	/*
-	 * We only care about regions.and objects that are allowed to have address
-	 * space handlers
+	 * We only care about regions and objects that are allowed to have
+	 * address space handlers
 	 */
 	if ((node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
 		return (AE_OK);
diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c
index 93ec528bcd9a9..3b48f1ecb55b1 100644
--- a/drivers/acpi/acpica/evrgnini.c
+++ b/drivers/acpi/acpica/evrgnini.c
@@ -50,9 +50,6 @@
 #define _COMPONENT          ACPI_EVENTS
 ACPI_MODULE_NAME("evrgnini")
 
-/* Local prototypes */
-static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node);
-
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ev_system_memory_region_setup
@@ -67,7 +64,6 @@ static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node);
  * DESCRIPTION: Setup a system_memory operation region
  *
  ******************************************************************************/
-
 acpi_status
 acpi_ev_system_memory_region_setup(acpi_handle handle,
 				   u32 function,
@@ -347,7 +343,7 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
  *
  ******************************************************************************/
 
-static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
+u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
 {
 	acpi_status status;
 	struct acpi_pnp_device_id *hid;
diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c
index beba9d56a0d87..742a9fe6e235d 100644
--- a/drivers/acpi/acpica/evxfregn.c
+++ b/drivers/acpi/acpica/evxfregn.c
@@ -227,7 +227,6 @@ acpi_remove_address_space_handler(acpi_handle device,
 				 */
 				region_obj =
 				    handler_obj->address_space.region_list;
-
 			}
 
 			/* Remove this Handler object from the list */
-- 
2.20.1

[PATCH AUTOSEL 4.14 048/115] powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer

[Sasha Levin]

From: Anton Blanchard <anton@ozlabs.org>

[ Upstream commit 8b78fdb045de60a4eb35460092bbd3cffa925353 ]

We currently cap the decrementer clockevent at 4 seconds, even on systems
with large decrementer support. Fix this by converting the code to use
clockevents_register_device() which calculates the upper bound based on
the max_delta passed in.

Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/time.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index fe6f3a2854557..870e75d304591 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -984,10 +984,10 @@ static void register_decrementer_clockevent(int cpu)
 	*dec = decrementer_clockevent;
 	dec->cpumask = cpumask_of(cpu);
 
+	clockevents_config_and_register(dec, ppc_tb_freq, 2, decrementer_max);
+
 	printk_once(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n",
 		    dec->name, dec->mult, dec->shift, cpu);
-
-	clockevents_register_device(dec);
 }
 
 static void enable_large_decrementer(void)
@@ -1035,18 +1035,7 @@ static void __init set_decrementer_max(void)
 
 static void __init init_decrementer_clockevent(void)
 {
-	int cpu = smp_processor_id();
-
-	clockevents_calc_mult_shift(&decrementer_clockevent, ppc_tb_freq, 4);
-
-	decrementer_clockevent.max_delta_ns =
-		clockevent_delta2ns(decrementer_max, &decrementer_clockevent);
-	decrementer_clockevent.max_delta_ticks = decrementer_max;
-	decrementer_clockevent.min_delta_ns =
-		clockevent_delta2ns(2, &decrementer_clockevent);
-	decrementer_clockevent.min_delta_ticks = 2;
-
-	register_decrementer_clockevent(cpu);
+	register_decrementer_clockevent(smp_processor_id());
 }
 
 void secondary_cpu_time_init(void)
-- 
2.20.1

[PATCH AUTOSEL 4.14 049/115] ata: ep93xx: Use proper enums for directions

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 6adde4a36f1b6a562a1057fbb1065007851050e7 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/ata/pata_ep93xx.c:662:36: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        drv_data->dma_rx_data.direction = DMA_FROM_DEVICE;
                                        ~ ^~~~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:670:36: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        drv_data->dma_tx_data.direction = DMA_TO_DEVICE;
                                        ~ ^~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:681:19: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        conf.direction = DMA_FROM_DEVICE;
                       ~ ^~~~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:692:19: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        conf.direction = DMA_TO_DEVICE;
                       ~ ^~~~~~~~~~~~~

Use the equivalent valued enums from the expected type so that Clang no
longer warns about a conversion.

DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/pata_ep93xx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index 0a550190955ad..cc6d06c1b2c70 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -659,7 +659,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 	 * start of new transfer.
 	 */
 	drv_data->dma_rx_data.port = EP93XX_DMA_IDE;
-	drv_data->dma_rx_data.direction = DMA_FROM_DEVICE;
+	drv_data->dma_rx_data.direction = DMA_DEV_TO_MEM;
 	drv_data->dma_rx_data.name = "ep93xx-pata-rx";
 	drv_data->dma_rx_channel = dma_request_channel(mask,
 		ep93xx_pata_dma_filter, &drv_data->dma_rx_data);
@@ -667,7 +667,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 		return;
 
 	drv_data->dma_tx_data.port = EP93XX_DMA_IDE;
-	drv_data->dma_tx_data.direction = DMA_TO_DEVICE;
+	drv_data->dma_tx_data.direction = DMA_MEM_TO_DEV;
 	drv_data->dma_tx_data.name = "ep93xx-pata-tx";
 	drv_data->dma_tx_channel = dma_request_channel(mask,
 		ep93xx_pata_dma_filter, &drv_data->dma_tx_data);
@@ -678,7 +678,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 
 	/* Configure receive channel direction and source address */
 	memset(&conf, 0, sizeof(conf));
-	conf.direction = DMA_FROM_DEVICE;
+	conf.direction = DMA_DEV_TO_MEM;
 	conf.src_addr = drv_data->udma_in_phys;
 	conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	if (dmaengine_slave_config(drv_data->dma_rx_channel, &conf)) {
@@ -689,7 +689,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 
 	/* Configure transmit channel direction and destination address */
 	memset(&conf, 0, sizeof(conf));
-	conf.direction = DMA_TO_DEVICE;
+	conf.direction = DMA_MEM_TO_DEV;
 	conf.dst_addr = drv_data->udma_out_phys;
 	conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	if (dmaengine_slave_config(drv_data->dma_tx_channel, &conf)) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 050/115] ARM: dts: da850-lego-ev3: slow down A/DC as much as possible

[Sasha Levin]

From: David Lechner <david@lechnology.com>

[ Upstream commit aea4762fb46e048c059ff49565ee33da07c8aeb3 ]

Due to the electrical design of the A/DC circuits on LEGO MINDSTORMS EV3,
if we are reading analog values as fast as possible (i.e. using DMA to
service the SPI) the A/DC chip will read incorrect values - as much as
0.1V off when the SPI is running at 10MHz. (This has to do with the
capacitor charge time when channels are muxed in the A/DC.)

This patch slows down the SPI as much as possible (if CPU is at 456MHz,
SPI runs at 1/2 of that, so 228MHz and has a max prescalar of 256, so
we could get ~891kHz, but we're just rounding it to 1MHz). We also use
the max allowable value for WDELAY to slow things down even more.

These changes reduce the error of the analog values to about 5mV, which
is tolerable.

Commits a3762b13a596 ("spi: spi-davinci: Add support for SPI_CS_WORD")
and e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce
CPU usage") introduce changes that allow DMA transfers to be used, so
this slow down is needed now.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/da850-lego-ev3.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index 81942ae83e1f9..fbd6d16f39a55 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -361,7 +361,8 @@
 		compatible = "ti,ads7957";
 		reg = <3>;
 		#io-channel-cells = <1>;
-		spi-max-frequency = <10000000>;
+		spi-max-frequency = <1000000>;
+		ti,spi-wdelay = <63>;
 		vref-supply = <&adc_ref>;
 	};
 };
-- 
2.20.1

[PATCH AUTOSEL 4.14 051/115] media: rc: ir-rc6-decoder: enable toggle bit for Kathrein RCU-676 remote

[Sasha Levin]

From: Matthias Reichl <hias@horus.com>

[ Upstream commit 85e4af0a7ae2f146769b7475ae531bf8a3f3afb4 ]

The Kathrein RCU-676 remote uses the 32-bit rc6 protocol and toggles
bit 15 (0x8000) on repeated button presses, like MCE remotes.

Add it's customer code 0x80460000 to the 32-bit rc6 toggle
handling code to get proper scancodes and toggle reports.

Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/ir-rc6-decoder.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c
index 5d0d2fe3b7a7f..90f7930444a1a 100644
--- a/drivers/media/rc/ir-rc6-decoder.c
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -40,6 +40,7 @@
 #define RC6_6A_MCE_TOGGLE_MASK	0x8000	/* for the body bits */
 #define RC6_6A_LCC_MASK		0xffff0000 /* RC6-6A-32 long customer code mask */
 #define RC6_6A_MCE_CC		0x800f0000 /* MCE customer code */
+#define RC6_6A_KATHREIN_CC	0x80460000 /* Kathrein RCU-676 customer code */
 #ifndef CHAR_BIT
 #define CHAR_BIT 8	/* Normally in <limits.h> */
 #endif
@@ -252,13 +253,17 @@ static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev)
 				toggle = 0;
 				break;
 			case 32:
-				if ((scancode & RC6_6A_LCC_MASK) == RC6_6A_MCE_CC) {
+				switch (scancode & RC6_6A_LCC_MASK) {
+				case RC6_6A_MCE_CC:
+				case RC6_6A_KATHREIN_CC:
 					protocol = RC_PROTO_RC6_MCE;
 					toggle = !!(scancode & RC6_6A_MCE_TOGGLE_MASK);
 					scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
-				} else {
+					break;
+				default:
 					protocol = RC_PROTO_RC6_6A_32;
 					toggle = 0;
+					break;
 				}
 				break;
 			default:
-- 
2.20.1

[PATCH AUTOSEL 4.14 052/115] media: pxa_camera: Fix check for pdev->dev.of_node

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 44d7f1a77d8c84f8e42789b5475b74ae0e6d4758 ]

Clang warns that the address of a pointer will always evaluated as true
in a boolean context.

drivers/media/platform/pxa_camera.c:2400:17: warning: address of
'pdev->dev.of_node' will always evaluate to 'true'
[-Wpointer-bool-conversion]
        if (&pdev->dev.of_node && !pcdev->pdata) {
             ~~~~~~~~~~^~~~~~~ ~~
1 warning generated.

Judging from the rest of the kernel, it seems like this was an error and
just the value of of_node should be checked rather than the address.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/pxa_camera.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
index edca993c2b1f0..d270a23299cc7 100644
--- a/drivers/media/platform/pxa_camera.c
+++ b/drivers/media/platform/pxa_camera.c
@@ -2374,7 +2374,7 @@ static int pxa_camera_probe(struct platform_device *pdev)
 	pcdev->res = res;
 
 	pcdev->pdata = pdev->dev.platform_data;
-	if (&pdev->dev.of_node && !pcdev->pdata) {
+	if (pdev->dev.of_node && !pcdev->pdata) {
 		err = pxa_camera_pdata_from_dt(&pdev->dev, pcdev, &pcdev->asd);
 	} else {
 		pcdev->platform_flags = pcdev->pdata->flags;
-- 
2.20.1

[PATCH AUTOSEL 4.14 053/115] media: i2c: adv748x: Support probing a single output

[Sasha Levin]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

[ Upstream commit eccf442ce156ec2b4e06b1239d5fdcb0c732f63f ]

Currently the adv748x driver will fail to probe unless both of its
output endpoints (TXA and TXB) are connected.

Make the driver support probing provided that there is at least one
input, and one output connected and protect the clean-up function from
accessing un-initialized fields.

Following patches will fix other uses of un-initialized TXs in the driver,
such as power management functions.

Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/adv748x/adv748x-core.c | 25 +++++++++++++++++++++---
 drivers/media/i2c/adv748x/adv748x-csi2.c | 18 ++++++-----------
 drivers/media/i2c/adv748x/adv748x.h      |  2 ++
 3 files changed, 30 insertions(+), 15 deletions(-)

diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
index 5ee14f2c27478..cfec08593ac88 100644
--- a/drivers/media/i2c/adv748x/adv748x-core.c
+++ b/drivers/media/i2c/adv748x/adv748x-core.c
@@ -642,7 +642,8 @@ static int adv748x_parse_dt(struct adv748x_state *state)
 {
 	struct device_node *ep_np = NULL;
 	struct of_endpoint ep;
-	bool found = false;
+	bool out_found = false;
+	bool in_found = false;
 
 	for_each_endpoint_of_node(state->dev->of_node, ep_np) {
 		of_graph_parse_endpoint(ep_np, &ep);
@@ -667,10 +668,17 @@ static int adv748x_parse_dt(struct adv748x_state *state)
 		of_node_get(ep_np);
 		state->endpoints[ep.port] = ep_np;
 
-		found = true;
+		/*
+		 * At least one input endpoint and one output endpoint shall
+		 * be defined.
+		 */
+		if (ep.port < ADV748X_PORT_TXA)
+			in_found = true;
+		else
+			out_found = true;
 	}
 
-	return found ? 0 : -ENODEV;
+	return in_found && out_found ? 0 : -ENODEV;
 }
 
 static void adv748x_dt_cleanup(struct adv748x_state *state)
@@ -702,6 +710,17 @@ static int adv748x_probe(struct i2c_client *client,
 	state->i2c_clients[ADV748X_PAGE_IO] = client;
 	i2c_set_clientdata(client, state);
 
+	/*
+	 * We can not use container_of to get back to the state with two TXs;
+	 * Initialize the TXs's fields unconditionally on the endpoint
+	 * presence to access them later.
+	 */
+	state->txa.state = state->txb.state = state;
+	state->txa.page = ADV748X_PAGE_TXA;
+	state->txb.page = ADV748X_PAGE_TXB;
+	state->txa.port = ADV748X_PORT_TXA;
+	state->txb.port = ADV748X_PORT_TXB;
+
 	/* Discover and process ports declared by the Device tree endpoints */
 	ret = adv748x_parse_dt(state);
 	if (ret) {
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 979825d4a419b..0953ba0bcc09b 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -265,19 +265,10 @@ static int adv748x_csi2_init_controls(struct adv748x_csi2 *tx)
 
 int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
 {
-	struct device_node *ep;
 	int ret;
 
-	/* We can not use container_of to get back to the state with two TXs */
-	tx->state = state;
-	tx->page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
-
-	ep = state->endpoints[is_txa(tx) ? ADV748X_PORT_TXA : ADV748X_PORT_TXB];
-	if (!ep) {
-		adv_err(state, "No endpoint found for %s\n",
-				is_txa(tx) ? "txa" : "txb");
-		return -ENODEV;
-	}
+	if (!is_tx_enabled(tx))
+		return 0;
 
 	/* Initialise the virtual channel */
 	adv748x_csi2_set_virtual_channel(tx, 0);
@@ -287,7 +278,7 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
 			    is_txa(tx) ? "txa" : "txb");
 
 	/* Ensure that matching is based upon the endpoint fwnodes */
-	tx->sd.fwnode = of_fwnode_handle(ep);
+	tx->sd.fwnode = of_fwnode_handle(state->endpoints[tx->port]);
 
 	/* Register internal ops for incremental subdev registration */
 	tx->sd.internal_ops = &adv748x_csi2_internal_ops;
@@ -320,6 +311,9 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
 
 void adv748x_csi2_cleanup(struct adv748x_csi2 *tx)
 {
+	if (!is_tx_enabled(tx))
+		return;
+
 	v4l2_async_unregister_subdev(&tx->sd);
 	media_entity_cleanup(&tx->sd.entity);
 	v4l2_ctrl_handler_free(&tx->ctrl_hdl);
diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
index cc4151b5b31e2..296c5f8a8c633 100644
--- a/drivers/media/i2c/adv748x/adv748x.h
+++ b/drivers/media/i2c/adv748x/adv748x.h
@@ -94,6 +94,7 @@ struct adv748x_csi2 {
 	struct adv748x_state *state;
 	struct v4l2_mbus_framefmt format;
 	unsigned int page;
+	unsigned int port;
 
 	struct media_pad pads[ADV748X_CSI2_NR_PADS];
 	struct v4l2_ctrl_handler ctrl_hdl;
@@ -102,6 +103,7 @@ struct adv748x_csi2 {
 
 #define notifier_to_csi2(n) container_of(n, struct adv748x_csi2, notifier)
 #define adv748x_sd_to_csi2(sd) container_of(sd, struct adv748x_csi2, sd)
+#define is_tx_enabled(_tx) ((_tx)->state->endpoints[(_tx)->port] != NULL)
 
 enum adv748x_hdmi_pads {
 	ADV748X_HDMI_SINK,
-- 
2.20.1

[PATCH AUTOSEL 4.14 054/115] ALSA: hda/sigmatel - Disable automute for Elo VuPoint

[Sasha Levin]

From: Michael Pobega <mpobega@neverware.com>

[ Upstream commit d153135e93a50cdb6f1b52e238909e9965b56056 ]

The Elo VuPoint 15MX has two headphone jacks of which neither work by
default. Disabling automute allows ALSA to work normally with the
speakers & left headphone jack.

Future pin configuration changes may be required in the future to get
the right headphone jack working in tandem.

Signed-off-by: Michael Pobega <mpobega@neverware.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_sigmatel.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 63d15b545b333..7cd147411b22d 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -77,6 +77,7 @@ enum {
 	STAC_DELL_M6_BOTH,
 	STAC_DELL_EQ,
 	STAC_ALIENWARE_M17X,
+	STAC_ELO_VUPOINT_15MX,
 	STAC_92HD89XX_HP_FRONT_JACK,
 	STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK,
 	STAC_92HD73XX_ASUS_MOBO,
@@ -1897,6 +1898,18 @@ static void stac92hd73xx_fixup_no_jd(struct hda_codec *codec,
 		codec->no_jack_detect = 1;
 }
 
+
+static void stac92hd73xx_disable_automute(struct hda_codec *codec,
+				     const struct hda_fixup *fix, int action)
+{
+	struct sigmatel_spec *spec = codec->spec;
+
+	if (action != HDA_FIXUP_ACT_PRE_PROBE)
+		return;
+
+	spec->gen.suppress_auto_mute = 1;
+}
+
 static const struct hda_fixup stac92hd73xx_fixups[] = {
 	[STAC_92HD73XX_REF] = {
 		.type = HDA_FIXUP_FUNC,
@@ -1922,6 +1935,10 @@ static const struct hda_fixup stac92hd73xx_fixups[] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = stac92hd73xx_fixup_alienware_m17x,
 	},
+	[STAC_ELO_VUPOINT_15MX] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = stac92hd73xx_disable_automute,
+	},
 	[STAC_92HD73XX_INTEL] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = intel_dg45id_pin_configs,
@@ -1960,6 +1977,7 @@ static const struct hda_model_fixup stac92hd73xx_models[] = {
 	{ .id = STAC_DELL_M6_BOTH, .name = "dell-m6" },
 	{ .id = STAC_DELL_EQ, .name = "dell-eq" },
 	{ .id = STAC_ALIENWARE_M17X, .name = "alienware" },
+	{ .id = STAC_ELO_VUPOINT_15MX, .name = "elo-vupoint-15mx" },
 	{ .id = STAC_92HD73XX_ASUS_MOBO, .name = "asus-mobo" },
 	{}
 };
@@ -2009,6 +2027,8 @@ static const struct snd_pci_quirk stac92hd73xx_fixup_tbl[] = {
 		      "Alienware M17x", STAC_ALIENWARE_M17X),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0490,
 		      "Alienware M17x R3", STAC_DELL_EQ),
+	SND_PCI_QUIRK(0x1059, 0x1011,
+		      "ELO VuPoint 15MX", STAC_ELO_VUPOINT_15MX),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1927,
 				"HP Z1 G2", STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x2b17,
-- 
2.20.1

[PATCH AUTOSEL 4.14 055/115] KVM: PPC: Book3S PR: Exiting split hack mode needs to fixup both PC and LR

[Sasha Levin]

From: Cameron Kaiser <spectre@floodgap.com>

[ Upstream commit 1006284c5e411872333967b1970c2ca46a9e225f ]

When an OS (currently only classic Mac OS) is running in KVM-PR and makes a
linked jump from code with split hack addressing enabled into code that does
not, LR is not correctly updated and reflects the previously munged PC.

To fix this, this patch undoes the address munge when exiting split
hack mode so that code relying on LR being a proper address will now
execute. This does not affect OS X or other operating systems running
on KVM-PR.

Signed-off-by: Cameron Kaiser <spectre@floodgap.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index d38280b01ef08..1eda812499376 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -79,8 +79,11 @@ void kvmppc_unfixup_split_real(struct kvm_vcpu *vcpu)
 {
 	if (vcpu->arch.hflags & BOOK3S_HFLAG_SPLIT_HACK) {
 		ulong pc = kvmppc_get_pc(vcpu);
+		ulong lr = kvmppc_get_lr(vcpu);
 		if ((pc & SPLIT_HACK_MASK) == SPLIT_HACK_OFFS)
 			kvmppc_set_pc(vcpu, pc & ~SPLIT_HACK_MASK);
+		if ((lr & SPLIT_HACK_MASK) == SPLIT_HACK_OFFS)
+			kvmppc_set_lr(vcpu, lr & ~SPLIT_HACK_MASK);
 		vcpu->arch.hflags &= ~BOOK3S_HFLAG_SPLIT_HACK;
 	}
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 056/115] USB: serial: cypress_m8: fix interrupt-out transfer length

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 56445eef55cb5904096fed7a73cf87b755dfffc7 ]

Fix interrupt-out transfer length which was being set to the
transfer-buffer length rather than the size of the outgoing packet.

Note that no slab data was leaked as the whole transfer buffer is always
cleared before each transfer.

Fixes: 9aa8dae7b1fa ("cypress_m8: use usb_fill_int_urb where appropriate")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/serial/cypress_m8.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 90110de715e01..d0aa4c853f56a 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -773,7 +773,7 @@ static void cypress_send(struct usb_serial_port *port)
 
 	usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
 		usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
-		port->interrupt_out_buffer, port->interrupt_out_size,
+		port->interrupt_out_buffer, actual_size,
 		cypress_write_int_callback, port, priv->write_urb_interval);
 	result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
 	if (result) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 057/115] mtd: physmap_of: Release resources on error

[Sasha Levin]

From: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>

[ Upstream commit ef0de747f7ad179c7698a5b0e28db05f18ecbf57 ]

During probe, if there was an error the memory region and the memory
map were not properly released.This can lead a system unusable if
deferred probe is in use.

Replace mem_request and map with devm_ioremap_resource

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/maps/physmap_of_core.c | 27 +++++----------------------
 1 file changed, 5 insertions(+), 22 deletions(-)

diff --git a/drivers/mtd/maps/physmap_of_core.c b/drivers/mtd/maps/physmap_of_core.c
index b1bd4faecfb25..5d8399742c754 100644
--- a/drivers/mtd/maps/physmap_of_core.c
+++ b/drivers/mtd/maps/physmap_of_core.c
@@ -30,7 +30,6 @@
 struct of_flash_list {
 	struct mtd_info *mtd;
 	struct map_info map;
-	struct resource *res;
 };
 
 struct of_flash {
@@ -55,18 +54,10 @@ static int of_flash_remove(struct platform_device *dev)
 			mtd_concat_destroy(info->cmtd);
 	}
 
-	for (i = 0; i < info->list_size; i++) {
+	for (i = 0; i < info->list_size; i++)
 		if (info->list[i].mtd)
 			map_destroy(info->list[i].mtd);
 
-		if (info->list[i].map.virt)
-			iounmap(info->list[i].map.virt);
-
-		if (info->list[i].res) {
-			release_resource(info->list[i].res);
-			kfree(info->list[i].res);
-		}
-	}
 	return 0;
 }
 
@@ -214,10 +205,11 @@ static int of_flash_probe(struct platform_device *dev)
 
 		err = -EBUSY;
 		res_size = resource_size(&res);
-		info->list[i].res = request_mem_region(res.start, res_size,
-						       dev_name(&dev->dev));
-		if (!info->list[i].res)
+		info->list[i].map.virt = devm_ioremap_resource(&dev->dev, &res);
+		if (IS_ERR(info->list[i].map.virt)) {
+			err = PTR_ERR(info->list[i].map.virt);
 			goto err_out;
+		}
 
 		err = -ENXIO;
 		width = of_get_property(dp, "bank-width", NULL);
@@ -240,15 +232,6 @@ static int of_flash_probe(struct platform_device *dev)
 		if (err)
 			goto err_out;
 
-		err = -ENOMEM;
-		info->list[i].map.virt = ioremap(info->list[i].map.phys,
-						 info->list[i].map.size);
-		if (!info->list[i].map.virt) {
-			dev_err(&dev->dev, "Failed to ioremap() flash"
-				" region\n");
-			goto err_out;
-		}
-
 		simple_map_init(&info->list[i].map);
 
 		/*
-- 
2.20.1

[PATCH AUTOSEL 4.14 058/115] cpu/SMT: State SMT is disabled even with nosmt and without "=force"

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit d0e7d14455d41163126afecd0fcce935463cc512 ]

When booting with "nosmt=force" a message is issued into dmesg to
confirm that SMT has been force-disabled but such a message is not
issued when only "nosmt" is on the kernel command line.

Fix that.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181004172227.10094-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/cpu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/cpu.c b/kernel/cpu.c
index d768e15bef83b..39ed368767f1f 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -376,6 +376,7 @@ void __init cpu_smt_disable(bool force)
 		pr_info("SMT: Force disabled\n");
 		cpu_smt_control = CPU_SMT_FORCE_DISABLED;
 	} else {
+		pr_info("SMT: disabled\n");
 		cpu_smt_control = CPU_SMT_DISABLED;
 	}
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 059/115] brcmfmac: reduce timeout for action frame scan

[Sasha Levin]

From: Chung-Hsien Hsu <stanley.hsu@cypress.com>

[ Upstream commit edb6d6885bef82d1eac432dbeca9fbf4ec349d7e ]

Finding a common channel to send an action frame out is required for
some action types. Since a loop with several scan retry is used to find
the channel, a short wait time could be considered for each attempt.
This patch reduces the wait time from 1500 to 450 msec for each action
frame scan.

This patch fixes the WFA p2p certification 5.1.20 failure caused by the
long action frame send time.

Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
index 450f2216fac2d..c9566c9036721 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -74,7 +74,7 @@
 #define P2P_AF_MAX_WAIT_TIME		msecs_to_jiffies(2000)
 #define P2P_INVALID_CHANNEL		-1
 #define P2P_CHANNEL_SYNC_RETRY		5
-#define P2P_AF_FRM_SCAN_MAX_WAIT	msecs_to_jiffies(1500)
+#define P2P_AF_FRM_SCAN_MAX_WAIT	msecs_to_jiffies(450)
 #define P2P_DEFAULT_SLEEP_TIME_VSDB	200
 
 /* WiFi P2P Public Action Frame OUI Subtypes */
@@ -1139,7 +1139,6 @@ static s32 brcmf_p2p_af_searching_channel(struct brcmf_p2p_info *p2p)
 {
 	struct afx_hdl *afx_hdl = &p2p->afx_hdl;
 	struct brcmf_cfg80211_vif *pri_vif;
-	unsigned long duration;
 	s32 retry;
 
 	brcmf_dbg(TRACE, "Enter\n");
@@ -1155,7 +1154,6 @@ static s32 brcmf_p2p_af_searching_channel(struct brcmf_p2p_info *p2p)
 	 * pending action frame tx is cancelled.
 	 */
 	retry = 0;
-	duration = msecs_to_jiffies(P2P_AF_FRM_SCAN_MAX_WAIT);
 	while ((retry < P2P_CHANNEL_SYNC_RETRY) &&
 	       (afx_hdl->peer_chan == P2P_INVALID_CHANNEL)) {
 		afx_hdl->is_listen = false;
@@ -1163,7 +1161,8 @@ static s32 brcmf_p2p_af_searching_channel(struct brcmf_p2p_info *p2p)
 			  retry);
 		/* search peer on peer's listen channel */
 		schedule_work(&afx_hdl->afx_work);
-		wait_for_completion_timeout(&afx_hdl->act_frm_scan, duration);
+		wait_for_completion_timeout(&afx_hdl->act_frm_scan,
+					    P2P_AF_FRM_SCAN_MAX_WAIT);
 		if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) ||
 		    (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL,
 			       &p2p->status)))
@@ -1176,7 +1175,7 @@ static s32 brcmf_p2p_af_searching_channel(struct brcmf_p2p_info *p2p)
 			afx_hdl->is_listen = true;
 			schedule_work(&afx_hdl->afx_work);
 			wait_for_completion_timeout(&afx_hdl->act_frm_scan,
-						    duration);
+						    P2P_AF_FRM_SCAN_MAX_WAIT);
 		}
 		if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) ||
 		    (!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL,
-- 
2.20.1

[PATCH AUTOSEL 4.14 060/115] brcmfmac: fix full timeout waiting for action frame on-channel tx

[Sasha Levin]

From: Chung-Hsien Hsu <stanley.hsu@cypress.com>

[ Upstream commit fbf07000960d9c8a13fdc17c6de0230d681c7543 ]

The driver sends an action frame down and waits for a completion signal
triggered by the received BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE event
to continue the process. However, the action frame could be transmitted
either on the current channel or on an off channel. For the on-channel
case, only BRCMF_E_ACTION_FRAME_COMPLETE event will be received when
the frame is transmitted, which make the driver always wait a full
timeout duration. This patch has the completion signal be triggered by
receiving the BRCMF_E_ACTION_FRAME_COMPLETE event for the on-channel
case.

This change fixes WFA p2p certification 5.1.19 failure.

Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/broadcom/brcm80211/brcmfmac/p2p.c  | 17 +++++++++++++++--
 .../wireless/broadcom/brcm80211/brcmfmac/p2p.h  |  2 ++
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
index c9566c9036721..4a883f4bbf885 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -1462,10 +1462,12 @@ int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp,
 		return 0;
 
 	if (e->event_code == BRCMF_E_ACTION_FRAME_COMPLETE) {
-		if (e->status == BRCMF_E_STATUS_SUCCESS)
+		if (e->status == BRCMF_E_STATUS_SUCCESS) {
 			set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED,
 				&p2p->status);
-		else {
+			if (!p2p->wait_for_offchan_complete)
+				complete(&p2p->send_af_done);
+		} else {
 			set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status);
 			/* If there is no ack, we don't need to wait for
 			 * WLC_E_ACTION_FRAME_OFFCHAN_COMPLETE event
@@ -1516,6 +1518,17 @@ static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p,
 	p2p->af_sent_channel = le32_to_cpu(af_params->channel);
 	p2p->af_tx_sent_jiffies = jiffies;
 
+	if (test_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status) &&
+	    p2p->af_sent_channel ==
+	    ieee80211_frequency_to_channel(p2p->remain_on_channel.center_freq))
+		p2p->wait_for_offchan_complete = false;
+	else
+		p2p->wait_for_offchan_complete = true;
+
+	brcmf_dbg(TRACE, "Waiting for %s tx completion event\n",
+		  (p2p->wait_for_offchan_complete) ?
+		   "off-channel" : "on-channel");
+
 	timeout = wait_for_completion_timeout(&p2p->send_af_done,
 					      P2P_AF_MAX_WAIT_TIME);
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
index 0e8b34d2d85cb..39f0d02180882 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
@@ -124,6 +124,7 @@ struct afx_hdl {
  * @gon_req_action: about to send go negotiation requets frame.
  * @block_gon_req_tx: drop tx go negotiation requets frame.
  * @p2pdev_dynamically: is p2p device if created by module param or supplicant.
+ * @wait_for_offchan_complete: wait for off-channel tx completion event.
  */
 struct brcmf_p2p_info {
 	struct brcmf_cfg80211_info *cfg;
@@ -144,6 +145,7 @@ struct brcmf_p2p_info {
 	bool gon_req_action;
 	bool block_gon_req_tx;
 	bool p2pdev_dynamically;
+	bool wait_for_offchan_complete;
 };
 
 s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced);
-- 
2.20.1

[PATCH AUTOSEL 4.14 061/115] qtnfmac: pass sgi rate info flag to wireless core

[Sasha Levin]

From: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>

[ Upstream commit d5657b709e2a92a0e581109010765d1d485580df ]

SGI should be passed to wireless core as a part of rate structure.
Otherwise wireless core performs incorrect rate calculation when
SGI is enabled in hardware but not reported to host.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/quantenna/qtnfmac/commands.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/quantenna/qtnfmac/commands.c b/drivers/net/wireless/quantenna/qtnfmac/commands.c
index 4206886b110ce..ed087bbc6f631 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/commands.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/commands.c
@@ -485,6 +485,9 @@ qtnf_sta_info_parse_rate(struct rate_info *rate_dst,
 		rate_dst->flags |= RATE_INFO_FLAGS_MCS;
 	else if (rate_src->flags & QLINK_STA_INFO_RATE_FLAG_VHT_MCS)
 		rate_dst->flags |= RATE_INFO_FLAGS_VHT_MCS;
+
+	if (rate_src->flags & QLINK_STA_INFO_RATE_FLAG_SHORT_GI)
+		rate_dst->flags |= RATE_INFO_FLAGS_SHORT_GI;
 }
 
 static void
-- 
2.20.1

[PATCH AUTOSEL 4.14 062/115] qtnfmac: drop error reports for out-of-bounds key indexes

[Sasha Levin]

From: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>

[ Upstream commit 35da3fe63b8647ce3cc52fccdf186a60710815fb ]

On disconnect wireless core attempts to remove all the supported keys.
Following cfg80211_ops conventions, firmware returns -ENOENT code
for the out-of-bound key indexes. This is a normal behavior,
so no need to report errors for this case.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/quantenna/qtnfmac/cfg80211.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
index a450bc6bc7745..d02f68792ce41 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
@@ -509,9 +509,16 @@ static int qtnf_del_key(struct wiphy *wiphy, struct net_device *dev,
 	int ret;
 
 	ret = qtnf_cmd_send_del_key(vif, key_index, pairwise, mac_addr);
-	if (ret)
-		pr_err("VIF%u.%u: failed to delete key: idx=%u pw=%u\n",
-		       vif->mac->macid, vif->vifid, key_index, pairwise);
+	if (ret) {
+		if (ret == -ENOENT) {
+			pr_debug("VIF%u.%u: key index %d out of bounds\n",
+				 vif->mac->macid, vif->vifid, key_index);
+		} else {
+			pr_err("VIF%u.%u: failed to delete key: idx=%u pw=%u\n",
+			       vif->mac->macid, vif->vifid,
+			       key_index, pairwise);
+		}
+	}
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 063/115] clk: samsung: exynos5420: Define CLK_SECKEY gate clock only or Exynos5420

[Sasha Levin]

From: Joonyoung Shim <jy0922.shim@samsung.com>

[ Upstream commit d32dd2a1a0f80edad158c9a1ba5f47650d9504a0 ]

The bit of GATE_BUS_PERIS1 for CLK_SECKEY is just reserved on
exynos5422/5800, not exynos5420. Define gate clk for exynos5420 to
handle the bit only on exynos5420.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[m.szyprow: rewrote commit subject]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/samsung/clk-exynos5420.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 500a55415e900..a882f7038bcec 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -633,6 +633,7 @@ static const struct samsung_div_clock exynos5420_div_clks[] __initconst = {
 };
 
 static const struct samsung_gate_clock exynos5420_gate_clks[] __initconst = {
+	GATE(CLK_SECKEY, "seckey", "aclk66_psgen", GATE_BUS_PERIS1, 1, 0, 0),
 	GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk",
 			SRC_MASK_TOP7, 20, CLK_SET_RATE_PARENT, 0),
 };
@@ -1167,8 +1168,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
 	GATE(CLK_TMU, "tmu", "aclk66_psgen", GATE_IP_PERIS, 21, 0, 0),
 	GATE(CLK_TMU_GPU, "tmu_gpu", "aclk66_psgen", GATE_IP_PERIS, 22, 0, 0),
 
-	GATE(CLK_SECKEY, "seckey", "aclk66_psgen", GATE_BUS_PERIS1, 1, 0, 0),
-
 	/* GEN Block */
 	GATE(CLK_ROTATOR, "rotator", "mout_user_aclk266", GATE_IP_GEN, 1, 0, 0),
 	GATE(CLK_JPEG, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0),
-- 
2.20.1

[PATCH AUTOSEL 4.14 064/115] clk: samsung: Use clk_hw API for calling clk framework from clk notifiers

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 1da220e3a5d22fccda0bc8542997abc1d1741268 ]

clk_notifier_register() documentation states, that the provided notifier
callbacks associated with the notifier must not re-enter into the clk
framework by calling any top-level clk APIs. Fix this by replacing
clk_get_rate() calls with clk_hw_get_rate(), which is safe in this
context.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/samsung/clk-cpu.c | 6 +++---
 drivers/clk/samsung/clk-cpu.h | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c
index 6686e8ba61f9f..82f023f29a61f 100644
--- a/drivers/clk/samsung/clk-cpu.c
+++ b/drivers/clk/samsung/clk-cpu.c
@@ -152,7 +152,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
 			struct exynos_cpuclk *cpuclk, void __iomem *base)
 {
 	const struct exynos_cpuclk_cfg_data *cfg_data = cpuclk->cfg;
-	unsigned long alt_prate = clk_get_rate(cpuclk->alt_parent);
+	unsigned long alt_prate = clk_hw_get_rate(cpuclk->alt_parent);
 	unsigned long alt_div = 0, alt_div_mask = DIV_MASK;
 	unsigned long div0, div1 = 0, mux_reg;
 	unsigned long flags;
@@ -280,7 +280,7 @@ static int exynos5433_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
 			struct exynos_cpuclk *cpuclk, void __iomem *base)
 {
 	const struct exynos_cpuclk_cfg_data *cfg_data = cpuclk->cfg;
-	unsigned long alt_prate = clk_get_rate(cpuclk->alt_parent);
+	unsigned long alt_prate = clk_hw_get_rate(cpuclk->alt_parent);
 	unsigned long alt_div = 0, alt_div_mask = DIV_MASK;
 	unsigned long div0, div1 = 0, mux_reg;
 	unsigned long flags;
@@ -432,7 +432,7 @@ int __init exynos_register_cpu_clock(struct samsung_clk_provider *ctx,
 	else
 		cpuclk->clk_nb.notifier_call = exynos_cpuclk_notifier_cb;
 
-	cpuclk->alt_parent = __clk_lookup(alt_parent);
+	cpuclk->alt_parent = __clk_get_hw(__clk_lookup(alt_parent));
 	if (!cpuclk->alt_parent) {
 		pr_err("%s: could not lookup alternate parent %s\n",
 				__func__, alt_parent);
diff --git a/drivers/clk/samsung/clk-cpu.h b/drivers/clk/samsung/clk-cpu.h
index d4b6b517fe1b4..bd38c6aa38970 100644
--- a/drivers/clk/samsung/clk-cpu.h
+++ b/drivers/clk/samsung/clk-cpu.h
@@ -49,7 +49,7 @@ struct exynos_cpuclk_cfg_data {
  */
 struct exynos_cpuclk {
 	struct clk_hw				hw;
-	struct clk				*alt_parent;
+	struct clk_hw				*alt_parent;
 	void __iomem				*ctrl_base;
 	spinlock_t				*lock;
 	const struct exynos_cpuclk_cfg_data	*cfg;
-- 
2.20.1

[PATCH AUTOSEL 4.14 065/115] i2c: brcmstb: Allow enabling the driver on DSL SoCs

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit e1eba2ea54a2de0e4c58d87270d25706bb77b844 ]

ARCH_BCM_63XX which is used by ARM-based DSL SoCs from Broadcom uses the
same controller, make it possible to select the STB driver and update
the Kconfig and help text a bit.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/Kconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45a3f3ca29b38..b72a25585d52b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -429,12 +429,13 @@ config I2C_BCM_KONA
 	  If you do not need KONA I2C interface, say N.
 
 config I2C_BRCMSTB
-	tristate "BRCM Settop I2C controller"
-	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	tristate "BRCM Settop/DSL I2C controller"
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \
+		   COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
-	  I2C interface on the Broadcom Settop SoCs.
+	  I2C interface on the Broadcom Settop/DSL SoCs.
 
 	  If you do not need I2C interface, say N.
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 066/115] NFSv4.x: fix lock recovery during delegation recall

[Sasha Levin]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit 44f411c353bf6d98d5a34f8f1b8605d43b2e50b8 ]

Running "./nfstest_delegation --runtest recall26" uncovers that
client doesn't recover the lock when we have an appending open,
where the initial open got a write delegation.

Instead of checking for the passed in open context against
the file lock's open context. Check that the state is the same.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/delegation.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 606dd3871f66b..17acad7d13160 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -91,7 +91,7 @@ int nfs4_check_delegation(struct inode *inode, fmode_t flags)
 	return nfs4_do_check_delegation(inode, flags, false);
 }
 
-static int nfs_delegation_claim_locks(struct nfs_open_context *ctx, struct nfs4_state *state, const nfs4_stateid *stateid)
+static int nfs_delegation_claim_locks(struct nfs4_state *state, const nfs4_stateid *stateid)
 {
 	struct inode *inode = state->inode;
 	struct file_lock *fl;
@@ -106,7 +106,7 @@ static int nfs_delegation_claim_locks(struct nfs_open_context *ctx, struct nfs4_
 	spin_lock(&flctx->flc_lock);
 restart:
 	list_for_each_entry(fl, list, fl_list) {
-		if (nfs_file_open_context(fl->fl_file) != ctx)
+		if (nfs_file_open_context(fl->fl_file)->state != state)
 			continue;
 		spin_unlock(&flctx->flc_lock);
 		status = nfs4_lock_delegation_recall(fl, state, stateid);
@@ -153,7 +153,7 @@ static int nfs_delegation_claim_opens(struct inode *inode,
 		seq = raw_seqcount_begin(&sp->so_reclaim_seqcount);
 		err = nfs4_open_delegation_recall(ctx, state, stateid, type);
 		if (!err)
-			err = nfs_delegation_claim_locks(ctx, state, stateid);
+			err = nfs_delegation_claim_locks(state, stateid);
 		if (!err && read_seqcount_retry(&sp->so_reclaim_seqcount, seq))
 			err = -EAGAIN;
 		mutex_unlock(&sp->so_delegreturn_mutex);
-- 
2.20.1

[PATCH AUTOSEL 4.14 067/115] dmaengine: ioat: fix prototype of ioat_enumerate_channels

[Sasha Levin]

From: Rami Rosen <ramirose@gmail.com>

[ Upstream commit f4d34aa8c887a8a2d23ef546da0efa10e3f77241 ]

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ioat/init.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
index 68680e4151eaa..9103a0425f752 100644
--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -129,7 +129,7 @@ static void
 ioat_init_channel(struct ioatdma_device *ioat_dma,
 		  struct ioatdma_chan *ioat_chan, int idx);
 static void ioat_intr_quirk(struct ioatdma_device *ioat_dma);
-static int ioat_enumerate_channels(struct ioatdma_device *ioat_dma);
+static void ioat_enumerate_channels(struct ioatdma_device *ioat_dma);
 static int ioat3_dma_self_test(struct ioatdma_device *ioat_dma);
 
 static int ioat_dca_enabled = 1;
@@ -575,7 +575,7 @@ static void ioat_dma_remove(struct ioatdma_device *ioat_dma)
  * ioat_enumerate_channels - find and initialize the device's channels
  * @ioat_dma: the ioat dma device to be enumerated
  */
-static int ioat_enumerate_channels(struct ioatdma_device *ioat_dma)
+static void ioat_enumerate_channels(struct ioatdma_device *ioat_dma)
 {
 	struct ioatdma_chan *ioat_chan;
 	struct device *dev = &ioat_dma->pdev->dev;
@@ -594,7 +594,7 @@ static int ioat_enumerate_channels(struct ioatdma_device *ioat_dma)
 	xfercap_log = readb(ioat_dma->reg_base + IOAT_XFERCAP_OFFSET);
 	xfercap_log &= 0x1f; /* bits [4:0] valid */
 	if (xfercap_log == 0)
-		return 0;
+		return;
 	dev_dbg(dev, "%s: xfercap = %d\n", __func__, 1 << xfercap_log);
 
 	for (i = 0; i < dma->chancnt; i++) {
@@ -611,7 +611,6 @@ static int ioat_enumerate_channels(struct ioatdma_device *ioat_dma)
 		}
 	}
 	dma->chancnt = i;
-	return i;
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.14 068/115] media: cec-gpio: select correct Signal Free Time

[Sasha Levin]

From: Hans Verkuil <hans.verkuil@cisco.com>

[ Upstream commit c439d5c1e13dbf66cff53455432f21d4d0536c51 ]

If a receive is in progress or starts before the transmit has
a chance, then lower the Signal Free Time of the upcoming transmit
to no more than CEC_SIGNAL_FREE_TIME_NEW_INITIATOR.

This is per the specification requirements.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/cec/cec-pin.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/media/cec/cec-pin.c b/drivers/media/cec/cec-pin.c
index c003b8eac6176..68fc6a24d0771 100644
--- a/drivers/media/cec/cec-pin.c
+++ b/drivers/media/cec/cec-pin.c
@@ -529,6 +529,17 @@ static enum hrtimer_restart cec_pin_timer(struct hrtimer *timer)
 			/* Start bit, switch to receive state */
 			pin->ts = ts;
 			pin->state = CEC_ST_RX_START_BIT_LOW;
+			/*
+			 * If a transmit is pending, then that transmit should
+			 * use a signal free time of no more than
+			 * CEC_SIGNAL_FREE_TIME_NEW_INITIATOR since it will
+			 * have a new initiator due to the receive that is now
+			 * starting.
+			 */
+			if (pin->tx_msg.len && pin->tx_signal_free_time >
+			    CEC_SIGNAL_FREE_TIME_NEW_INITIATOR)
+				pin->tx_signal_free_time =
+					CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
 			break;
 		}
 		if (pin->ts == 0)
@@ -690,6 +701,15 @@ static int cec_pin_adap_transmit(struct cec_adapter *adap, u8 attempts,
 {
 	struct cec_pin *pin = adap->pin;
 
+	/*
+	 * If a receive is in progress, then this transmit should use
+	 * a signal free time of max CEC_SIGNAL_FREE_TIME_NEW_INITIATOR
+	 * since when it starts transmitting it will have a new initiator.
+	 */
+	if (pin->state != CEC_ST_IDLE &&
+	    signal_free_time > CEC_SIGNAL_FREE_TIME_NEW_INITIATOR)
+		signal_free_time = CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
+
 	pin->tx_signal_free_time = signal_free_time;
 	pin->tx_msg = *msg;
 	pin->work_tx_status = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 069/115] Input: st1232 - set INPUT_PROP_DIRECT property

[Sasha Levin]

From: Martin Kepplinger <martink@posteo.de>

[ Upstream commit 20bbb312079494a406c10c90932e3c80837c9d94 ]

This is how userspace checks for touchscreen devices most reliably.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/st1232.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index be5615c6bf8ff..482f97e1c9d37 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -203,6 +203,7 @@ static int st1232_ts_probe(struct i2c_client *client,
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->dev.parent = &client->dev;
 
+	__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
 	__set_bit(EV_SYN, input_dev->evbit);
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(EV_ABS, input_dev->evbit);
-- 
2.20.1

[PATCH AUTOSEL 4.14 070/115] Input: silead - try firmware reload after unsuccessful resume

[Sasha Levin]

From: Julian Sax <jsbc@gmx.de>

[ Upstream commit dde27443211062e841806feaf690674b7c3a599f ]

A certain silead controller (Chip ID: 0x56810000) loses its firmware
after suspend, causing the resume to fail. This patch tries to load
the firmware, should a resume error occur and retries the resuming.

Signed-off-by: Julian Sax <jsbc@gmx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/silead.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
index 0dbcf105f7db3..7c0eeef29b3cb 100644
--- a/drivers/input/touchscreen/silead.c
+++ b/drivers/input/touchscreen/silead.c
@@ -534,20 +534,33 @@ static int __maybe_unused silead_ts_suspend(struct device *dev)
 static int __maybe_unused silead_ts_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	bool second_try = false;
 	int error, status;
 
 	silead_ts_set_power(client, SILEAD_POWER_ON);
 
+ retry:
 	error = silead_ts_reset(client);
 	if (error)
 		return error;
 
+	if (second_try) {
+		error = silead_ts_load_fw(client);
+		if (error)
+			return error;
+	}
+
 	error = silead_ts_startup(client);
 	if (error)
 		return error;
 
 	status = silead_ts_get_status(client);
 	if (status != SILEAD_STATUS_OK) {
+		if (!second_try) {
+			second_try = true;
+			dev_dbg(dev, "Reloading firmware after unsuccessful resume\n");
+			goto retry;
+		}
 		dev_err(dev, "Resume error, status: 0x%02x\n", status);
 		return -ENODEV;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 071/115] remoteproc: Check for NULL firmwares in sysfs interface

[Sasha Levin]

From: Suman Anna <s-anna@ti.com>

[ Upstream commit faeadbb64094757150a8c2a3175ca418dbdd472c ]

The remoteproc framework provides a sysfs file 'firmware'
for modifying the firmware image name from userspace. Add
an additional check to ensure NULL firmwares are errored
out right away, rather than getting a delayed error while
requesting a firmware during the start of a remoteproc
later on.

Tested-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/remoteproc_sysfs.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
index 47be411400e56..3a4c3d7cafca3 100644
--- a/drivers/remoteproc/remoteproc_sysfs.c
+++ b/drivers/remoteproc/remoteproc_sysfs.c
@@ -48,6 +48,11 @@ static ssize_t firmware_store(struct device *dev,
 	}
 
 	len = strcspn(buf, "\n");
+	if (!len) {
+		dev_err(dev, "can't provide a NULL firmware\n");
+		err = -EINVAL;
+		goto out;
+	}
 
 	p = kstrndup(buf, len, GFP_KERNEL);
 	if (!p) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 072/115] kexec: Allocate decrypted control pages for kdump if SME is enabled

[Sasha Levin]

From: Lianbo Jiang <lijiang@redhat.com>

[ Upstream commit 9cf38d5559e813cccdba8b44c82cc46ba48d0896 ]

When SME is enabled in the first kernel, it needs to allocate decrypted
pages for kdump because when the kdump kernel boots, these pages need to
be accessed decrypted in the initial boot stage, before SME is enabled.

 [ bp: clean up text. ]

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: kexec@lists.infradead.org
Cc: tglx@linutronix.de
Cc: mingo@redhat.com
Cc: hpa@zytor.com
Cc: akpm@linux-foundation.org
Cc: dan.j.williams@intel.com
Cc: bhelgaas@google.com
Cc: baiyaowei@cmss.chinamobile.com
Cc: tiwai@suse.de
Cc: brijesh.singh@amd.com
Cc: dyoung@redhat.com
Cc: bhe@redhat.com
Cc: jroedel@suse.de
Link: https://lkml.kernel.org/r/20180930031033.22110-3-lijiang@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/kexec_core.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c
index 8f15665ab6167..27cf24e285e0c 100644
--- a/kernel/kexec_core.c
+++ b/kernel/kexec_core.c
@@ -473,6 +473,10 @@ static struct page *kimage_alloc_crash_control_pages(struct kimage *image,
 		}
 	}
 
+	/* Ensure that these pages are decrypted if SME is enabled. */
+	if (pages)
+		arch_kexec_post_alloc_pages(page_address(pages), 1 << order, 0);
+
 	return pages;
 }
 
@@ -867,6 +871,7 @@ static int kimage_load_crash_segment(struct kimage *image,
 			result  = -ENOMEM;
 			goto out;
 		}
+		arch_kexec_post_alloc_pages(page_address(page), 1, 0);
 		ptr = kmap(page);
 		ptr += maddr & ~PAGE_MASK;
 		mchunk = min_t(size_t, mbytes,
@@ -884,6 +889,7 @@ static int kimage_load_crash_segment(struct kimage *image,
 			result = copy_from_user(ptr, buf, uchunk);
 		kexec_flush_icache_page(page);
 		kunmap(page);
+		arch_kexec_pre_free_pages(page_address(page), 1);
 		if (result) {
 			result = -EFAULT;
 			goto out;
-- 
2.20.1

[PATCH AUTOSEL 4.14 073/115] x86/olpc: Fix build error with CONFIG_MFD_CS5535=m

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit fa112cf1e8bc693d5a666b1c479a2859c8b6e0f1 ]

When building a 32-bit config which has the above MFD item as module
but OLPC_XO1_PM is enabled =y - which is bool, btw - the kernel fails
building with:

  ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function `xo1_pm_remove':
  /home/boris/kernel/linux/arch/x86/platform/olpc/olpc-xo1-pm.c:159: undefined reference to `mfd_cell_disable'
  ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function `xo1_pm_probe':
  /home/boris/kernel/linux/arch/x86/platform/olpc/olpc-xo1-pm.c:133: undefined reference to `mfd_cell_enable'
  make: *** [Makefile:1030: vmlinux] Error 1

Force MFD_CS5535 to y if OLPC_XO1_PM is enabled.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20181005131750.GA5366@zn.tnic
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 8fec1585ac7ab..ce147c0e76f0d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2671,8 +2671,7 @@ config OLPC
 
 config OLPC_XO1_PM
 	bool "OLPC XO-1 Power Management"
-	depends on OLPC && MFD_CS5535 && PM_SLEEP
-	select MFD_CORE
+	depends on OLPC && MFD_CS5535=y && PM_SLEEP
 	---help---
 	  Add support for poweroff and suspend of the OLPC XO-1 laptop.
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 074/115] dmaengine: rcar-dmac: set scatter/gather max segment size

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit 97d49c59e219acac576e16293a6b8cb99302f62f ]

Fix warning when running with CONFIG_DMA_API_DEBUG_SG=y by allocating a
device_dma_parameters structure and filling in the max segment size.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/sh/rcar-dmac.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index 19c7433e83097..f7ca57125ac7c 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -200,6 +200,7 @@ struct rcar_dmac {
 	struct dma_device engine;
 	struct device *dev;
 	void __iomem *iomem;
+	struct device_dma_parameters parms;
 
 	unsigned int n_channels;
 	struct rcar_dmac_chan *channels;
@@ -1764,6 +1765,8 @@ static int rcar_dmac_probe(struct platform_device *pdev)
 
 	dmac->dev = &pdev->dev;
 	platform_set_drvdata(pdev, dmac);
+	dmac->dev->dma_parms = &dmac->parms;
+	dma_set_max_seg_size(dmac->dev, RCAR_DMATCR_MASK);
 	dma_set_mask_and_coherent(dmac->dev, DMA_BIT_MASK(40));
 
 	ret = rcar_dmac_parse_of(&pdev->dev, dmac);
-- 
2.20.1

[PATCH AUTOSEL 4.14 075/115] crypto: mxs-dcp - Fix SHA null hashes and output length

[Sasha Levin]

From: Radu Solea <radu.solea@nxp.com>

[ Upstream commit c709eebaf5c5faa8a0f140355f9cfe67e8f7afb1 ]

DCP writes at least 32 bytes in the output buffer instead of hash length
as documented. Add intermediate buffer to prevent write out of bounds.

When requested to produce null hashes DCP fails to produce valid output.
Add software workaround to bypass hardware and return valid output.

Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/mxs-dcp.c | 47 +++++++++++++++++++++++++++++++---------
 1 file changed, 37 insertions(+), 10 deletions(-)

diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index a98a25733a222..4615dbee22d0a 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -28,9 +28,24 @@
 
 #define DCP_MAX_CHANS	4
 #define DCP_BUF_SZ	PAGE_SIZE
+#define DCP_SHA_PAY_SZ  64
 
 #define DCP_ALIGNMENT	64
 
+/*
+ * Null hashes to align with hw behavior on imx6sl and ull
+ * these are flipped for consistency with hw output
+ */
+const uint8_t sha1_null_hash[] =
+	"\x09\x07\xd8\xaf\x90\x18\x60\x95\xef\xbf"
+	"\x55\x32\x0d\x4b\x6b\x5e\xee\xa3\x39\xda";
+
+const uint8_t sha256_null_hash[] =
+	"\x55\xb8\x52\x78\x1b\x99\x95\xa4"
+	"\x4c\x93\x9b\x64\xe4\x41\xae\x27"
+	"\x24\xb9\x6f\x99\xc8\xf4\xfb\x9a"
+	"\x14\x1c\xfc\x98\x42\xc4\xb0\xe3";
+
 /* DCP DMA descriptor. */
 struct dcp_dma_desc {
 	uint32_t	next_cmd_addr;
@@ -48,6 +63,7 @@ struct dcp_coherent_block {
 	uint8_t			aes_in_buf[DCP_BUF_SZ];
 	uint8_t			aes_out_buf[DCP_BUF_SZ];
 	uint8_t			sha_in_buf[DCP_BUF_SZ];
+	uint8_t			sha_out_buf[DCP_SHA_PAY_SZ];
 
 	uint8_t			aes_key[2 * AES_KEYSIZE_128];
 
@@ -513,8 +529,6 @@ static int mxs_dcp_run_sha(struct ahash_request *req)
 	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
 	struct dcp_async_ctx *actx = crypto_ahash_ctx(tfm);
 	struct dcp_sha_req_ctx *rctx = ahash_request_ctx(req);
-	struct hash_alg_common *halg = crypto_hash_alg_common(tfm);
-
 	struct dcp_dma_desc *desc = &sdcp->coh->desc[actx->chan];
 
 	dma_addr_t digest_phys = 0;
@@ -536,10 +550,23 @@ static int mxs_dcp_run_sha(struct ahash_request *req)
 	desc->payload = 0;
 	desc->status = 0;
 
+	/*
+	 * Align driver with hw behavior when generating null hashes
+	 */
+	if (rctx->init && rctx->fini && desc->size == 0) {
+		struct hash_alg_common *halg = crypto_hash_alg_common(tfm);
+		const uint8_t *sha_buf =
+			(actx->alg == MXS_DCP_CONTROL1_HASH_SELECT_SHA1) ?
+			sha1_null_hash : sha256_null_hash;
+		memcpy(sdcp->coh->sha_out_buf, sha_buf, halg->digestsize);
+		ret = 0;
+		goto done_run;
+	}
+
 	/* Set HASH_TERM bit for last transfer block. */
 	if (rctx->fini) {
-		digest_phys = dma_map_single(sdcp->dev, req->result,
-					     halg->digestsize, DMA_FROM_DEVICE);
+		digest_phys = dma_map_single(sdcp->dev, sdcp->coh->sha_out_buf,
+					     DCP_SHA_PAY_SZ, DMA_FROM_DEVICE);
 		desc->control0 |= MXS_DCP_CONTROL0_HASH_TERM;
 		desc->payload = digest_phys;
 	}
@@ -547,9 +574,10 @@ static int mxs_dcp_run_sha(struct ahash_request *req)
 	ret = mxs_dcp_start_dma(actx);
 
 	if (rctx->fini)
-		dma_unmap_single(sdcp->dev, digest_phys, halg->digestsize,
+		dma_unmap_single(sdcp->dev, digest_phys, DCP_SHA_PAY_SZ,
 				 DMA_FROM_DEVICE);
 
+done_run:
 	dma_unmap_single(sdcp->dev, buf_phys, DCP_BUF_SZ, DMA_TO_DEVICE);
 
 	return ret;
@@ -567,6 +595,7 @@ static int dcp_sha_req_to_buf(struct crypto_async_request *arq)
 	const int nents = sg_nents(req->src);
 
 	uint8_t *in_buf = sdcp->coh->sha_in_buf;
+	uint8_t *out_buf = sdcp->coh->sha_out_buf;
 
 	uint8_t *src_buf;
 
@@ -621,11 +650,9 @@ static int dcp_sha_req_to_buf(struct crypto_async_request *arq)
 
 		actx->fill = 0;
 
-		/* For some reason, the result is flipped. */
-		for (i = 0; i < halg->digestsize / 2; i++) {
-			swap(req->result[i],
-			     req->result[halg->digestsize - i - 1]);
-		}
+		/* For some reason the result is flipped */
+		for (i = 0; i < halg->digestsize; i++)
+			req->result[i] = out_buf[halg->digestsize - i - 1];
 	}
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 076/115] crypto: mxs-dcp - Fix AES issues

[Sasha Levin]

From: Radu Solea <radu.solea@nxp.com>

[ Upstream commit fadd7a6e616b89c7f4f7bfa7b824f290bab32c3c ]

The DCP driver does not obey cryptlen, when doing android CTS this
results in passing to hardware input stream lengths which are not
multiple of block size.

Add a check to prevent future erroneous stream lengths from reaching the
hardware and adjust the scatterlist walking code to obey cryptlen.

Also properly copy-out the IV for chaining.

Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/mxs-dcp.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index 4615dbee22d0a..e1e1e81107904 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -225,6 +225,12 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
 	dma_addr_t dst_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_out_buf,
 					     DCP_BUF_SZ, DMA_FROM_DEVICE);
 
+	if (actx->fill % AES_BLOCK_SIZE) {
+		dev_err(sdcp->dev, "Invalid block size!\n");
+		ret = -EINVAL;
+		goto aes_done_run;
+	}
+
 	/* Fill in the DMA descriptor. */
 	desc->control0 = MXS_DCP_CONTROL0_DECR_SEMAPHORE |
 		    MXS_DCP_CONTROL0_INTERRUPT |
@@ -254,6 +260,7 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
 
 	ret = mxs_dcp_start_dma(actx);
 
+aes_done_run:
 	dma_unmap_single(sdcp->dev, key_phys, 2 * AES_KEYSIZE_128,
 			 DMA_TO_DEVICE);
 	dma_unmap_single(sdcp->dev, src_phys, DCP_BUF_SZ, DMA_TO_DEVICE);
@@ -280,13 +287,15 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 
 	uint8_t *out_tmp, *src_buf, *dst_buf = NULL;
 	uint32_t dst_off = 0;
+	uint32_t last_out_len = 0;
 
 	uint8_t *key = sdcp->coh->aes_key;
 
 	int ret = 0;
 	int split = 0;
-	unsigned int i, len, clen, rem = 0;
+	unsigned int i, len, clen, rem = 0, tlen = 0;
 	int init = 0;
+	bool limit_hit = false;
 
 	actx->fill = 0;
 
@@ -305,6 +314,11 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 	for_each_sg(req->src, src, nents, i) {
 		src_buf = sg_virt(src);
 		len = sg_dma_len(src);
+		tlen += len;
+		limit_hit = tlen > req->nbytes;
+
+		if (limit_hit)
+			len = req->nbytes - (tlen - len);
 
 		do {
 			if (actx->fill + len > out_off)
@@ -321,13 +335,15 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 			 * If we filled the buffer or this is the last SG,
 			 * submit the buffer.
 			 */
-			if (actx->fill == out_off || sg_is_last(src)) {
+			if (actx->fill == out_off || sg_is_last(src) ||
+				limit_hit) {
 				ret = mxs_dcp_run_aes(actx, req, init);
 				if (ret)
 					return ret;
 				init = 0;
 
 				out_tmp = out_buf;
+				last_out_len = actx->fill;
 				while (dst && actx->fill) {
 					if (!split) {
 						dst_buf = sg_virt(dst);
@@ -350,6 +366,19 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 				}
 			}
 		} while (len);
+
+		if (limit_hit)
+			break;
+	}
+
+	/* Copy the IV for CBC for chaining */
+	if (!rctx->ecb) {
+		if (rctx->enc)
+			memcpy(req->info, out_buf+(last_out_len-AES_BLOCK_SIZE),
+				AES_BLOCK_SIZE);
+		else
+			memcpy(req->info, in_buf+(last_out_len-AES_BLOCK_SIZE),
+				AES_BLOCK_SIZE);
 	}
 
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 4.14 077/115] xfrm: use correct size to initialise sp->ovec

[Sasha Levin]

From: Li RongQing <lirongqing@baidu.com>

[ Upstream commit f1193e915748291fb205a908db33bd3debece6e2 ]

This place should want to initialize array, not a element,
so it should be sizeof(array) instead of sizeof(element)

but now this array only has one element, so no error in
this condition that XFRM_MAX_OFFLOAD_DEPTH is 1

Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index 06dec32503bd6..fc0a9ce1be18f 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -130,7 +130,7 @@ struct sec_path *secpath_dup(struct sec_path *src)
 	sp->len = 0;
 	sp->olen = 0;
 
-	memset(sp->ovec, 0, sizeof(sp->ovec[XFRM_MAX_OFFLOAD_DEPTH]));
+	memset(sp->ovec, 0, sizeof(sp->ovec));
 
 	if (src) {
 		int i;
-- 
2.20.1

[PATCH AUTOSEL 4.14 078/115] ACPI / SBS: Fix rare oops when removing modules

[Sasha Levin]

From: Ronald Tschalär <ronald@innovation.ch>

[ Upstream commit 757c968c442397f1249bb775a7c8c03842e3e0c7 ]

There was a small race when removing the sbshc module where
smbus_alarm() had queued acpi_smbus_callback() for deferred execution
but it hadn't been run yet, so that when it did run hc had been freed
and the module unloaded, resulting in an invalid paging request.

A similar race existed when removing the sbs module with regards to
acpi_sbs_callback() (which is called from acpi_smbus_callback()).

We therefore need to ensure no callbacks are pending or executing before
the cleanups are done and the modules are removed.

Signed-off-by: Ronald Tschalär <ronald@innovation.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/osl.c   | 1 +
 drivers/acpi/sbshc.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 191e86c62037a..9da7e7d874bd8 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1116,6 +1116,7 @@ void acpi_os_wait_events_complete(void)
 	flush_workqueue(kacpid_wq);
 	flush_workqueue(kacpi_notify_wq);
 }
+EXPORT_SYMBOL(acpi_os_wait_events_complete);
 
 struct acpi_hp_work {
 	struct work_struct work;
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index 7a3431018e0ab..5008ead4609a4 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -196,6 +196,7 @@ int acpi_smbus_unregister_callback(struct acpi_smb_hc *hc)
 	hc->callback = NULL;
 	hc->context = NULL;
 	mutex_unlock(&hc->lock);
+	acpi_os_wait_events_complete();
 	return 0;
 }
 
@@ -292,6 +293,7 @@ static int acpi_smbus_hc_remove(struct acpi_device *device)
 
 	hc = acpi_driver_data(device);
 	acpi_ec_remove_query_handler(hc->ec, hc->query_bit);
+	acpi_os_wait_events_complete();
 	kfree(hc);
 	device->driver_data = NULL;
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 079/115] iwlwifi: mvm: don't send keys when entering D3

[Sasha Levin]

From: Sara Sharon <sara.sharon@intel.com>

[ Upstream commit 8c7fd6a365eb5b2647b2c01918730d0a485b9f85 ]

In the past, we needed to program the keys when entering D3. This was
since we replaced the image. However, now that there is a single
image, this is no longer needed.  Note that RSC is sent separately in
a new command.  This solves issues with newer devices that support PN
offload. Since driver re-sent the keys, the PN got zeroed and the
receiver dropped the next packets, until PN caught up again.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
index b205a7bfb828d..65c51c6983288 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
@@ -947,8 +947,10 @@ int iwl_mvm_wowlan_config_key_params(struct iwl_mvm *mvm,
 {
 	struct iwl_wowlan_kek_kck_material_cmd kek_kck_cmd = {};
 	struct iwl_wowlan_tkip_params_cmd tkip_cmd = {};
+	bool unified = fw_has_capa(&mvm->fw->ucode_capa,
+				   IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG);
 	struct wowlan_key_data key_data = {
-		.configure_keys = !d0i3,
+		.configure_keys = !d0i3 && !unified,
 		.use_rsc_tsc = false,
 		.tkip = &tkip_cmd,
 		.use_tkip = false,
-- 
2.20.1

[PATCH AUTOSEL 4.14 080/115] x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately

[Sasha Levin]

From: Andy Lutomirski <luto@kernel.org>

[ Upstream commit 07e1d88adaaeab247b300926f78cc3f950dbeda3 ]

On 64-bit kernels ptrace can read the FS/GS base using the register access
APIs (PTRACE_PEEKUSER, etc.) or PTRACE_ARCH_PRCTL.

Make both of these mechanisms return the actual FS/GS base.

This will improve debuggability by providing the correct information
to ptracer such as GDB.

[ chang: Rebased and revised patch description. ]
[ mingo: Revised the changelog some more. ]

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537312139-5580-2-git-send-email-chang.seok.bae@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/ptrace.c | 62 +++++++++++++++++++++++++++++++++-------
 1 file changed, 52 insertions(+), 10 deletions(-)

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 584cdd475bb31..734549492a18b 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -40,6 +40,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/traps.h>
 #include <asm/syscall.h>
+#include <asm/mmu_context.h>
 
 #include "tls.h"
 
@@ -343,6 +344,49 @@ static int set_segment_reg(struct task_struct *task,
 	return 0;
 }
 
+static unsigned long task_seg_base(struct task_struct *task,
+				   unsigned short selector)
+{
+	unsigned short idx = selector >> 3;
+	unsigned long base;
+
+	if (likely((selector & SEGMENT_TI_MASK) == 0)) {
+		if (unlikely(idx >= GDT_ENTRIES))
+			return 0;
+
+		/*
+		 * There are no user segments in the GDT with nonzero bases
+		 * other than the TLS segments.
+		 */
+		if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
+			return 0;
+
+		idx -= GDT_ENTRY_TLS_MIN;
+		base = get_desc_base(&task->thread.tls_array[idx]);
+	} else {
+#ifdef CONFIG_MODIFY_LDT_SYSCALL
+		struct ldt_struct *ldt;
+
+		/*
+		 * If performance here mattered, we could protect the LDT
+		 * with RCU.  This is a slow path, though, so we can just
+		 * take the mutex.
+		 */
+		mutex_lock(&task->mm->context.lock);
+		ldt = task->mm->context.ldt;
+		if (unlikely(idx >= ldt->nr_entries))
+			base = 0;
+		else
+			base = get_desc_base(ldt->entries + idx);
+		mutex_unlock(&task->mm->context.lock);
+#else
+		base = 0;
+#endif
+	}
+
+	return base;
+}
+
 #endif	/* CONFIG_X86_32 */
 
 static unsigned long get_flags(struct task_struct *task)
@@ -436,18 +480,16 @@ static unsigned long getreg(struct task_struct *task, unsigned long offset)
 
 #ifdef CONFIG_X86_64
 	case offsetof(struct user_regs_struct, fs_base): {
-		/*
-		 * XXX: This will not behave as expected if called on
-		 * current or if fsindex != 0.
-		 */
-		return task->thread.fsbase;
+		if (task->thread.fsindex == 0)
+			return task->thread.fsbase;
+		else
+			return task_seg_base(task, task->thread.fsindex);
 	}
 	case offsetof(struct user_regs_struct, gs_base): {
-		/*
-		 * XXX: This will not behave as expected if called on
-		 * current or if fsindex != 0.
-		 */
-		return task->thread.gsbase;
+		if (task->thread.gsindex == 0)
+			return task->thread.gsbase;
+		else
+			return task_seg_base(task, task->thread.gsindex);
 	}
 #endif
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 081/115] mmc: tmio: Fix SCC error detection

[Sasha Levin]

From: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>

[ Upstream commit b85fb0a1c8aeaaa40d08945d51a6656b512173f0 ]

SDR104, HS200 and HS400 need to check for SCC error. If SCC error is
detected, retuning is necessary.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
[Niklas: update commit message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/tmio_mmc_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 2437fcde915a7..01e51b7945750 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -914,8 +914,8 @@ static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
 	if (mrq->cmd->error || (mrq->data && mrq->data->error))
 		tmio_mmc_abort_dma(host);
 
-	if (host->check_scc_error)
-		host->check_scc_error(host);
+	if (host->check_scc_error && host->check_scc_error(host))
+		mrq->cmd->error = -EILSEQ;
 
 	/* If SET_BLOCK_COUNT, continue with main command */
 	if (host->mrq && !mrq->cmd->error) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 082/115] fbdev: sbuslib: use checked version of put_user()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d8bad911e5e55e228d59c0606ff7e6b8131ca7bf ]

I'm not sure why the code assumes that only the first put_user() needs
an access_ok() check.  I have made all the put_user() and get_user()
calls checked.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Peter Malone <peter.malone@gmail.com>,
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/sbuslib.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/video/fbdev/sbuslib.c b/drivers/video/fbdev/sbuslib.c
index a436d44f1b7fb..90c51330969c2 100644
--- a/drivers/video/fbdev/sbuslib.c
+++ b/drivers/video/fbdev/sbuslib.c
@@ -106,11 +106,11 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
 		struct fbtype __user *f = (struct fbtype __user *) arg;
 
 		if (put_user(type, &f->fb_type) ||
-		    __put_user(info->var.yres, &f->fb_height) ||
-		    __put_user(info->var.xres, &f->fb_width) ||
-		    __put_user(fb_depth, &f->fb_depth) ||
-		    __put_user(0, &f->fb_cmsize) ||
-		    __put_user(fb_size, &f->fb_cmsize))
+		    put_user(info->var.yres, &f->fb_height) ||
+		    put_user(info->var.xres, &f->fb_width) ||
+		    put_user(fb_depth, &f->fb_depth) ||
+		    put_user(0, &f->fb_cmsize) ||
+		    put_user(fb_size, &f->fb_cmsize))
 			return -EFAULT;
 		return 0;
 	}
@@ -125,10 +125,10 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
 		unsigned int index, count, i;
 
 		if (get_user(index, &c->index) ||
-		    __get_user(count, &c->count) ||
-		    __get_user(ured, &c->red) ||
-		    __get_user(ugreen, &c->green) ||
-		    __get_user(ublue, &c->blue))
+		    get_user(count, &c->count) ||
+		    get_user(ured, &c->red) ||
+		    get_user(ugreen, &c->green) ||
+		    get_user(ublue, &c->blue))
 			return -EFAULT;
 
 		cmap.len = 1;
@@ -165,10 +165,10 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
 		u8 red, green, blue;
 
 		if (get_user(index, &c->index) ||
-		    __get_user(count, &c->count) ||
-		    __get_user(ured, &c->red) ||
-		    __get_user(ugreen, &c->green) ||
-		    __get_user(ublue, &c->blue))
+		    get_user(count, &c->count) ||
+		    get_user(ured, &c->red) ||
+		    get_user(ugreen, &c->green) ||
+		    get_user(ublue, &c->blue))
 			return -EFAULT;
 
 		if (index + count > cmap->len)
-- 
2.20.1

[PATCH AUTOSEL 4.14 083/115] fbdev: sbuslib: integer overflow in sbusfb_ioctl_helper()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e5017716adb8aa5c01c52386c1b7470101ffe9c5 ]

The "index + count" addition can overflow.  Both come directly from the
user.  This bug leads to an information leak.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Peter Malone <peter.malone@gmail.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/sbuslib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/sbuslib.c b/drivers/video/fbdev/sbuslib.c
index 90c51330969c2..01a7110e61a76 100644
--- a/drivers/video/fbdev/sbuslib.c
+++ b/drivers/video/fbdev/sbuslib.c
@@ -171,7 +171,7 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
 		    get_user(ublue, &c->blue))
 			return -EFAULT;
 
-		if (index + count > cmap->len)
+		if (index > cmap->len || count > cmap->len - index)
 			return -EINVAL;
 
 		for (i = 0; i < count; i++) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 084/115] reset: Fix potential use-after-free in __of_reset_control_get()

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit b790c8ea5593d6dc3580adfad8e117eeb56af874 ]

Calling of_node_put() decreases the reference count of a device tree
object, and may free some data.

However, the of_phandle_args structure embedding it is passed to
reset_controller_dev.of_xlate() after that, so it may still be accessed.

Move the call to of_node_put() down to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[p.zabel@pengutronix.de: moved of_node_put after mutex_unlock]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/reset/core.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index da4292e9de978..72b96b5c75a8f 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -466,28 +466,29 @@ struct reset_control *__of_reset_control_get(struct device_node *node,
 			break;
 		}
 	}
-	of_node_put(args.np);
 
 	if (!rcdev) {
-		mutex_unlock(&reset_list_mutex);
-		return ERR_PTR(-EPROBE_DEFER);
+		rstc = ERR_PTR(-EPROBE_DEFER);
+		goto out;
 	}
 
 	if (WARN_ON(args.args_count != rcdev->of_reset_n_cells)) {
-		mutex_unlock(&reset_list_mutex);
-		return ERR_PTR(-EINVAL);
+		rstc = ERR_PTR(-EINVAL);
+		goto out;
 	}
 
 	rstc_id = rcdev->of_xlate(rcdev, &args);
 	if (rstc_id < 0) {
-		mutex_unlock(&reset_list_mutex);
-		return ERR_PTR(rstc_id);
+		rstc = ERR_PTR(rstc_id);
+		goto out;
 	}
 
 	/* reset_list_mutex also protects the rcdev's reset_control list */
 	rstc = __reset_control_get_internal(rcdev, rstc_id, shared);
 
+out:
 	mutex_unlock(&reset_list_mutex);
+	of_node_put(args.np);
 
 	return rstc;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 085/115] bcache: recal cached_dev_sectors on detach

[Sasha Levin]

From: Shenghui Wang <shhuiw@foxmail.com>

[ Upstream commit 46010141da6677b81cc77f9b47f8ac62bd1cbfd3 ]

Recal cached_dev_sectors on cached_dev detached, as recal done on
cached_dev attached.

Update the cached_dev_sectors before bcache_device_detach called
as bcache_device_detach will set bcache_device->c to NULL.

Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 1a270e2262f52..690aeb09bbf55 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -905,6 +905,7 @@ static void cached_dev_detach_finish(struct work_struct *w)
 	bch_write_bdev_super(dc, &cl);
 	closure_sync(&cl);
 
+	calc_cached_dev_sectors(dc->disk.c);
 	bcache_device_detach(&dc->disk);
 	list_move(&dc->list, &uncached_devices);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 086/115] media: dw9714: Fix error handling in probe function

[Sasha Levin]

From: Rajmohan Mani <rajmohan.mani@intel.com>

[ Upstream commit f9a0b14240a2d0bd196d35e8aac73df6eabd6382 ]

Fixed the case where v4l2_async_unregister_subdev()
is called unnecessarily in the error handling path
in probe function.

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/dw9714.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c
index 95af4fc99cd04..c1273bcd59011 100644
--- a/drivers/media/i2c/dw9714.c
+++ b/drivers/media/i2c/dw9714.c
@@ -182,7 +182,8 @@ static int dw9714_probe(struct i2c_client *client)
 	return 0;
 
 err_cleanup:
-	dw9714_subdev_cleanup(dw9714_dev);
+	v4l2_ctrl_handler_free(&dw9714_dev->ctrls_vcm);
+	media_entity_cleanup(&dw9714_dev->sd.entity);
 	dev_err(&client->dev, "Probe failed: %d\n", rval);
 	return rval;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 087/115] s390/kasan: avoid vdso instrumentation

[Sasha Levin]

From: Vasily Gorbik <gor@linux.ibm.com>

[ Upstream commit 348498458505e202df41b6b9a78da448d39298b7 ]

vdso is mapped into user space processes, which won't have kasan
shodow mapped.

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/vdso32/Makefile | 3 ++-
 arch/s390/kernel/vdso64/Makefile | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
index 101cadabfc89e..6d87f800b4f2c 100644
--- a/arch/s390/kernel/vdso32/Makefile
+++ b/arch/s390/kernel/vdso32/Makefile
@@ -25,9 +25,10 @@ obj-y += vdso32_wrapper.o
 extra-y += vdso32.lds
 CPPFLAGS_vdso32.lds += -P -C -U$(ARCH)
 
-# Disable gcov profiling and ubsan for VDSO code
+# Disable gcov profiling, ubsan and kasan for VDSO code
 GCOV_PROFILE := n
 UBSAN_SANITIZE := n
+KASAN_SANITIZE := n
 
 # Force dependency (incbin is bad)
 $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index 36bbafcf4a770..4bc166b8c0cbd 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -25,9 +25,10 @@ obj-y += vdso64_wrapper.o
 extra-y += vdso64.lds
 CPPFLAGS_vdso64.lds += -P -C -U$(ARCH)
 
-# Disable gcov profiling and ubsan for VDSO code
+# Disable gcov profiling, ubsan and kasan for VDSO code
 GCOV_PROFILE := n
 UBSAN_SANITIZE := n
+KASAN_SANITIZE := n
 
 # Force dependency (incbin is bad)
 $(obj)/vdso64_wrapper.o : $(obj)/vdso64.so
-- 
2.20.1

[PATCH AUTOSEL 4.14 088/115] proc/vmcore: Fix i386 build error of missing copy_oldmem_page_encrypted()

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit cf089611f4c446285046fcd426d90c18f37d2905 ]

Lianbo reported a build error with a particular 32-bit config, see Link
below for details.

Provide a weak copy_oldmem_page_encrypted() function which architectures
can override, in the same manner other functionality in that file is
supplied.

Reported-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: x86@kernel.org
Link: http://lkml.kernel.org/r/710b9d95-2f70-eadf-c4a1-c3dc80ee4ebb@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/proc/vmcore.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index 885d445afa0d9..ce400f97370d3 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -164,6 +164,16 @@ int __weak remap_oldmem_pfn_range(struct vm_area_struct *vma,
 	return remap_pfn_range(vma, from, pfn, size, prot);
 }
 
+/*
+ * Architectures which support memory encryption override this.
+ */
+ssize_t __weak
+copy_oldmem_page_encrypted(unsigned long pfn, char *buf, size_t csize,
+			   unsigned long offset, int userbuf)
+{
+	return copy_oldmem_page(pfn, buf, csize, offset, userbuf);
+}
+
 /*
  * Copy to either kernel or user space
  */
-- 
2.20.1

[PATCH AUTOSEL 4.14 089/115] backlight: lm3639: Unconditionally call led_classdev_unregister

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 7cea645ae9c5a54aa7904fddb2cdf250acd63a6c ]

Clang warns that the address of a pointer will always evaluated as true
in a boolean context.

drivers/video/backlight/lm3639_bl.c:403:14: warning: address of
'pchip->cdev_torch' will always evaluate to 'true'
[-Wpointer-bool-conversion]
        if (&pchip->cdev_torch)
        ~~   ~~~~~~~^~~~~~~~~~
drivers/video/backlight/lm3639_bl.c:405:14: warning: address of
'pchip->cdev_flash' will always evaluate to 'true'
[-Wpointer-bool-conversion]
        if (&pchip->cdev_flash)
        ~~   ~~~~~~~^~~~~~~~~~
2 warnings generated.

These statements have been present since 2012, introduced by
commit 0f59858d5119 ("backlight: add new lm3639 backlight
driver"). Given that they have been called unconditionally since
then presumably without any issues, removing the always true if
statements to fix the warnings without any real world changes.

Link: https://github.com/ClangBuiltLinux/linux/issues/119
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/lm3639_bl.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c
index cd50df5807ead..086611c7bc03c 100644
--- a/drivers/video/backlight/lm3639_bl.c
+++ b/drivers/video/backlight/lm3639_bl.c
@@ -400,10 +400,8 @@ static int lm3639_remove(struct i2c_client *client)
 
 	regmap_write(pchip->regmap, REG_ENABLE, 0x00);
 
-	if (&pchip->cdev_torch)
-		led_classdev_unregister(&pchip->cdev_torch);
-	if (&pchip->cdev_flash)
-		led_classdev_unregister(&pchip->cdev_flash);
+	led_classdev_unregister(&pchip->cdev_torch);
+	led_classdev_unregister(&pchip->cdev_flash);
 	if (pchip->bled)
 		device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 090/115] mfd: ti_am335x_tscadc: Keep ADC interface on if child is wakeup capable

[Sasha Levin]

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit c974ac771479327b5424f60d58845e31daddadea ]

If a child device like touchscreen is wakeup capable, then keep ADC
interface on, so that a touching resistive screen will generate wakeup
event to the system.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/ti_am335x_tscadc.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 5894d6c16fab8..ca9f0c8d1ed0f 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -296,11 +296,24 @@ static int ti_tscadc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused ti_tscadc_can_wakeup(struct device *dev, void *data)
+{
+	return device_may_wakeup(dev);
+}
+
 static int __maybe_unused tscadc_suspend(struct device *dev)
 {
 	struct ti_tscadc_dev	*tscadc = dev_get_drvdata(dev);
 
 	regmap_write(tscadc->regmap, REG_SE, 0x00);
+	if (device_for_each_child(dev, NULL, ti_tscadc_can_wakeup)) {
+		u32 ctrl;
+
+		regmap_read(tscadc->regmap, REG_CTRL, &ctrl);
+		ctrl &= ~(CNTRLREG_POWERDOWN);
+		ctrl |= CNTRLREG_TSCSSENB;
+		regmap_write(tscadc->regmap, REG_CTRL, ctrl);
+	}
 	pm_runtime_put_sync(dev);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 091/115] printk: Give error on attempt to set log buffer length to over 2G

[Sasha Levin]

From: He Zhe <zhe.he@windriver.com>

[ Upstream commit e6fe3e5b7d16e8f146a4ae7fe481bc6e97acde1e ]

The current printk() is ready to handle log buffer size up to 2G.
Give an explicit error for users who want to use larger log buffer.

Also fix printk formatting to show the 2G as a positive number.

Link: http://lkml.kernel.org/r/20181008135916.gg4kkmoki5bgtco5@pathway.suse.cz
Cc: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek: Fixed to the really safe limit 2GB.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/printk.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 5aa96098c64d3..5b33c14ab8b25 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -432,6 +432,7 @@ static u32 clear_idx;
 /* record buffer */
 #define LOG_ALIGN __alignof__(struct printk_log)
 #define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
+#define LOG_BUF_LEN_MAX (u32)(1 << 31)
 static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
 static char *log_buf = __log_buf;
 static u32 log_buf_len = __LOG_BUF_LEN;
@@ -1032,18 +1033,23 @@ void log_buf_vmcoreinfo_setup(void)
 static unsigned long __initdata new_log_buf_len;
 
 /* we practice scaling the ring buffer by powers of 2 */
-static void __init log_buf_len_update(unsigned size)
+static void __init log_buf_len_update(u64 size)
 {
+	if (size > (u64)LOG_BUF_LEN_MAX) {
+		size = (u64)LOG_BUF_LEN_MAX;
+		pr_err("log_buf over 2G is not supported.\n");
+	}
+
 	if (size)
 		size = roundup_pow_of_two(size);
 	if (size > log_buf_len)
-		new_log_buf_len = size;
+		new_log_buf_len = (unsigned long)size;
 }
 
 /* save requested log_buf_len since it's too early to process it */
 static int __init log_buf_len_setup(char *str)
 {
-	unsigned int size;
+	u64 size;
 
 	if (!str)
 		return -EINVAL;
@@ -1113,7 +1119,7 @@ void __init setup_log_buf(int early)
 	}
 
 	if (unlikely(!new_log_buf)) {
-		pr_err("log_buf_len: %ld bytes not available\n",
+		pr_err("log_buf_len: %lu bytes not available\n",
 			new_log_buf_len);
 		return;
 	}
@@ -1126,8 +1132,8 @@ void __init setup_log_buf(int early)
 	memcpy(log_buf, __log_buf, __LOG_BUF_LEN);
 	logbuf_unlock_irqrestore(flags);
 
-	pr_info("log_buf_len: %d bytes\n", log_buf_len);
-	pr_info("early log buf free: %d(%d%%)\n",
+	pr_info("log_buf_len: %u bytes\n", log_buf_len);
+	pr_info("early log buf free: %u(%u%%)\n",
 		free, (free * 100) / __LOG_BUF_LEN);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 092/115] media: isif: fix a NULL pointer dereference bug

[Sasha Levin]

From: Wenwen Wang <wang6495@umn.edu>

[ Upstream commit a26ac6c1bed951b2066cc4b2257facd919e35c0b ]

In isif_probe(), there is a while loop to get the ISIF base address and
linearization table0 and table1 address. In the loop body, the function
platform_get_resource() is called to get the resource. If
platform_get_resource() returns NULL, the loop is terminated and the
execution goes to 'fail_nobase_res'. Suppose the loop is terminated at the
first iteration because platform_get_resource() returns NULL and the
execution goes to 'fail_nobase_res'. Given that there is another while loop
at 'fail_nobase_res' and i equals to 0, one iteration of the second while
loop will be executed. However, the second while loop does not check the
return value of platform_get_resource(). This can cause a NULL pointer
dereference bug if the return value is a NULL pointer.

This patch avoids the above issue by adding a check in the second while
loop after the call to platform_get_resource().

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/davinci/isif.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c
index 5813b49391edb..90d0f13283ae9 100644
--- a/drivers/media/platform/davinci/isif.c
+++ b/drivers/media/platform/davinci/isif.c
@@ -1102,7 +1102,8 @@ static int isif_probe(struct platform_device *pdev)
 
 	while (i >= 0) {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		release_mem_region(res->start, resource_size(res));
+		if (res)
+			release_mem_region(res->start, resource_size(res));
 		i--;
 	}
 	vpfe_unregister_ccdc_device(&isif_hw_dev);
-- 
2.20.1

[PATCH AUTOSEL 4.14 093/115] GFS2: Flush the GFS2 delete workqueue before stopping the kernel threads

[Sasha Levin]

From: Tim Smith <tim.smith@citrix.com>

[ Upstream commit 1eb8d7387908022951792a46fa040ad3942b3b08 ]

Flushing the workqueue can cause operations to happen which might
call gfs2_log_reserve(), or get stuck waiting for locks taken by such
operations.  gfs2_log_reserve() can io_schedule(). If this happens, it
will never wake because the only thing which can wake it is gfs2_logd()
which was already stopped.

This causes umount of a gfs2 filesystem to wedge permanently if, for
example, the umount immediately follows a large delete operation.

When this occured, the following stack trace was obtained from the
umount command

[<ffffffff81087968>] flush_workqueue+0x1c8/0x520
[<ffffffffa0666e29>] gfs2_make_fs_ro+0x69/0x160 [gfs2]
[<ffffffffa0667279>] gfs2_put_super+0xa9/0x1c0 [gfs2]
[<ffffffff811b7edf>] generic_shutdown_super+0x6f/0x100
[<ffffffff811b7ff7>] kill_block_super+0x27/0x70
[<ffffffffa0656a71>] gfs2_kill_sb+0x71/0x80 [gfs2]
[<ffffffff811b792b>] deactivate_locked_super+0x3b/0x70
[<ffffffff811b79b9>] deactivate_super+0x59/0x60
[<ffffffff811d2998>] cleanup_mnt+0x58/0x80
[<ffffffff811d2a12>] __cleanup_mnt+0x12/0x20
[<ffffffff8108c87d>] task_work_run+0x7d/0xa0
[<ffffffff8106d7d9>] exit_to_usermode_loop+0x73/0x98
[<ffffffff81003961>] syscall_return_slowpath+0x41/0x50
[<ffffffff815a594c>] int_ret_from_sys_call+0x25/0x8f
[<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Tim Smith <tim.smith@citrix.com>
Signed-off-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 8e54f2e3a3040..c3f3f1ae4e1b7 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -845,10 +845,10 @@ static int gfs2_make_fs_ro(struct gfs2_sbd *sdp)
 	if (error && !test_bit(SDF_SHUTDOWN, &sdp->sd_flags))
 		return error;
 
+	flush_workqueue(gfs2_delete_workqueue);
 	kthread_stop(sdp->sd_quotad_process);
 	kthread_stop(sdp->sd_logd_process);
 
-	flush_workqueue(gfs2_delete_workqueue);
 	gfs2_quota_sync(sdp->sd_vfs, 0);
 	gfs2_statfs_sync(sdp->sd_vfs, 0);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 094/115] media: cx231xx: fix potential sign-extension overflow on large shift

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 32ae592036d7aeaabcccb2b1715373a68639a768 ]

Shifting the u8 value[3] by an int can lead to sign-extension
overflow. For example, if value[3] is 0xff and the shift is 24 then it
is promoted to int and then the top bit is sign-extended so that all
upper 32 bits are set.  Fix this by casting value[3] to a u32 before
the shift.

Detected by CoverityScan, CID#1016522 ("Unintended sign extension")

Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/cx231xx/cx231xx-video.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c
index 179b8481a870d..fd33c2e9327da 100644
--- a/drivers/media/usb/cx231xx/cx231xx-video.c
+++ b/drivers/media/usb/cx231xx/cx231xx-video.c
@@ -1389,7 +1389,7 @@ int cx231xx_g_register(struct file *file, void *priv,
 		ret = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER,
 				(u16)reg->reg, value, 4);
 		reg->val = value[0] | value[1] << 8 |
-			value[2] << 16 | value[3] << 24;
+			value[2] << 16 | (u32)value[3] << 24;
 		reg->size = 4;
 		break;
 	case 1:	/* AFE - read byte */
-- 
2.20.1

[PATCH AUTOSEL 4.14 095/115] x86/kexec: Correct KEXEC_BACKUP_SRC_END off-by-one error

[Sasha Levin]

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 51fbf14f2528a8c6401290e37f1c893a2412f1d3 ]

The only use of KEXEC_BACKUP_SRC_END is as an argument to
walk_system_ram_res():

  int crash_load_segments(struct kimage *image)
  {
    ...
    walk_system_ram_res(KEXEC_BACKUP_SRC_START, KEXEC_BACKUP_SRC_END,
                        image, determine_backup_region);

walk_system_ram_res() expects "start, end" arguments that are inclusive,
i.e., the range to be walked includes both the start and end addresses.

KEXEC_BACKUP_SRC_END was previously defined as (640 * 1024UL), which is the
first address *past* the desired 0-640KB range.

Define KEXEC_BACKUP_SRC_END as (640 * 1024UL - 1) so the KEXEC_BACKUP_SRC
region is [0-0x9ffff], not [0-0xa0000].

Fixes: dd5f726076cc ("kexec: support for kexec on panic using new system call")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Brijesh Singh <brijesh.singh@amd.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Ingo Molnar <mingo@redhat.com>
CC: Lianbo Jiang <lijiang@redhat.com>
CC: Takashi Iwai <tiwai@suse.de>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Vivek Goyal <vgoyal@redhat.com>
CC: baiyaowei@cmss.chinamobile.com
CC: bhe@redhat.com
CC: dan.j.williams@intel.com
CC: dyoung@redhat.com
CC: kexec@lists.infradead.org
Link: http://lkml.kernel.org/r/153805811578.1157.6948388946904655969.stgit@bhelgaas-glaptop.roam.corp.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/kexec.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h
index f327236f0fa71..5125fca472bb0 100644
--- a/arch/x86/include/asm/kexec.h
+++ b/arch/x86/include/asm/kexec.h
@@ -67,7 +67,7 @@ struct kimage;
 
 /* Memory to backup during crash kdump */
 #define KEXEC_BACKUP_SRC_START	(0UL)
-#define KEXEC_BACKUP_SRC_END	(640 * 1024UL)	/* 640K */
+#define KEXEC_BACKUP_SRC_END	(640 * 1024UL - 1)	/* 640K */
 
 /*
  * CPU does not save ss and sp on stack if execution is already
-- 
2.20.1

[PATCH AUTOSEL 4.14 096/115] gpio: syscon: Fix possible NULL ptr usage

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 70728c29465bc4bfa7a8c14304771eab77e923c7 ]

The priv->data->set can be NULL while flags contains GPIO_SYSCON_FEAT_OUT
and chip->set is valid pointer. This happens in case the controller uses
the default GPIO setter. Always use chip->set to access the setter to avoid
possible NULL pointer dereferencing.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-syscon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c
index 537cec7583fca..cf88a0bfe99ea 100644
--- a/drivers/gpio/gpio-syscon.c
+++ b/drivers/gpio/gpio-syscon.c
@@ -122,7 +122,7 @@ static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val)
 				   BIT(offs % SYSCON_REG_BITS));
 	}
 
-	priv->data->set(chip, offset, val);
+	chip->set(chip, offset, val);
 
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.14 097/115] spi: fsl-lpspi: Prevent FIFO under/overrun by default

[Sasha Levin]

From: Hieu Tran Dang <dangtranhieu2012@gmail.com>

[ Upstream commit de8978c388c66b8fca192213ec9f0727e964c652 ]

Certain devices don't work well when a transmit FIFO underrun or
receive FIFO overrun occurs. Example is the SAF400x radio chip when
running at high speed which leads to garbage being sent to/received from
the chip. In which case, it should stall waiting for further data to be
available before proceeding. This patch unset the NOSTALL bit in CFGR1
by default to prevent this issue.

Signed-off-by: Hieu Tran Dang <dangtranhieu2012@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-lpspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index cb3c73007ca15..8fe51f7541bb3 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -287,7 +287,7 @@ static int fsl_lpspi_config(struct fsl_lpspi_data *fsl_lpspi)
 
 	fsl_lpspi_set_watermark(fsl_lpspi);
 
-	temp = CFGR1_PCSCFG | CFGR1_MASTER | CFGR1_NOSTALL;
+	temp = CFGR1_PCSCFG | CFGR1_MASTER;
 	if (fsl_lpspi->config.mode & SPI_CS_HIGH)
 		temp |= CFGR1_PCSPOL;
 	writel(temp, fsl_lpspi->base + IMX7ULP_CFGR1);
-- 
2.20.1

[PATCH AUTOSEL 4.14 098/115] pinctrl: gemini: Mask and set properly

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit d17f477c5bc6b4a5dd9f51ae263870da132a8e89 ]

The code was written under the assumption that the
regmap_update_bits() would mask the bits in the mask and
set the bits in the value.

It missed the points that it will not set bits in the value
unless these are also masked in the mask. Set value bits
that are not in the mask will simply be ignored.

Fixes: 06351d133dea ("pinctrl: add a Gemini SoC pin controller")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-gemini.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-gemini.c b/drivers/pinctrl/pinctrl-gemini.c
index 39e6221e71000..05441dc2519d2 100644
--- a/drivers/pinctrl/pinctrl-gemini.c
+++ b/drivers/pinctrl/pinctrl-gemini.c
@@ -2164,7 +2164,8 @@ static int gemini_pmx_set_mux(struct pinctrl_dev *pctldev,
 		 func->name, grp->name);
 
 	regmap_read(pmx->map, GLOBAL_MISC_CTRL, &before);
-	regmap_update_bits(pmx->map, GLOBAL_MISC_CTRL, grp->mask,
+	regmap_update_bits(pmx->map, GLOBAL_MISC_CTRL,
+			   grp->mask | grp->value,
 			   grp->value);
 	regmap_read(pmx->map, GLOBAL_MISC_CTRL, &after);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 099/115] spi: spidev: Fix OF tree warning logic

[Sasha Levin]

From: Trent Piepho <tpiepho@impinj.com>

[ Upstream commit 605b3bec73cbd74b4ac937b580cd0b47d1300484 ]

spidev will make a big fuss if a device tree node binds a device by
using "spidev" as the node's compatible property.

However, the logic for this isn't looking for "spidev" in the
compatible, but rather checking that the device is NOT compatible with
spidev's list of devices.

This causes a false positive if a device not named "rohm,dh2228fv", etc.
binds to spidev, even if a means other than putting "spidev" in the
device tree was used.  E.g., the sysfs driver_override attribute.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spidev.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index cda10719d1d1b..c5fe08bc34a0a 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -724,11 +724,9 @@ static int spidev_probe(struct spi_device *spi)
 	 * compatible string, it is a Linux implementation thing
 	 * rather than a description of the hardware.
 	 */
-	if (spi->dev.of_node && !of_match_device(spidev_dt_ids, &spi->dev)) {
-		dev_err(&spi->dev, "buggy DT: spidev listed directly in DT\n");
-		WARN_ON(spi->dev.of_node &&
-			!of_match_device(spidev_dt_ids, &spi->dev));
-	}
+	WARN(spi->dev.of_node &&
+	     of_device_is_compatible(spi->dev.of_node, "spidev"),
+	     "%pOF: buggy DT: spidev listed directly in DT\n", spi->dev.of_node);
 
 	spidev_probe_acpi(spi);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 100/115] ARM: 8802/1: Call syscall_trace_exit even when system call skipped

[Sasha Levin]

From: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk>

[ Upstream commit f18aef742c8fbd68e280dff0a63ba0ca6ee8ad85 ]

On at least x86 and ARM64, and as documented in the ptrace man page
a skipped system call will still cause a syscall exit ptrace stop.

Previous to this commit 32-bit ARM did not, resulting in strace
being confused when seccomp skips system calls.

This change also impacts programs that use ptrace to skip system calls.

Fixes: ad75b51459ae ("ARM: 7579/1: arch/allow a scno of -1 to not cause a SIGILL")
Signed-off-by: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Eugene Syromyatnikov <evgsyr@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Eugene Syromyatnikov <evgsyr@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/entry-common.S | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index d7dc808a3d154..08a7132f56006 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -282,16 +282,15 @@ __sys_trace:
 	cmp	scno, #-1			@ skip the syscall?
 	bne	2b
 	add	sp, sp, #S_OFF			@ restore stack
-	b	ret_slow_syscall
 
-__sys_trace_return:
-	str	r0, [sp, #S_R0 + S_OFF]!	@ save returned r0
+__sys_trace_return_nosave:
+	enable_irq_notrace
 	mov	r0, sp
 	bl	syscall_trace_exit
 	b	ret_slow_syscall
 
-__sys_trace_return_nosave:
-	enable_irq_notrace
+__sys_trace_return:
+	str	r0, [sp, #S_R0 + S_OFF]!	@ save returned r0
 	mov	r0, sp
 	bl	syscall_trace_exit
 	b	ret_slow_syscall
-- 
2.20.1

[PATCH AUTOSEL 4.14 101/115] orangefs: rate limit the client not running info message

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 2978d873471005577e7b68a528b4f256a529b030 ]

Currently accessing various /sys/fs/orangefs files will spam the
kernel log with the following info message when the client is not
running:

[  491.489284] sysfs_service_op_show: Client not running :-5:

Rate limit this info message to make it less spammy.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/orangefs/orangefs-sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/orangefs/orangefs-sysfs.c b/fs/orangefs/orangefs-sysfs.c
index 079a465796f3e..bc56df2ae705d 100644
--- a/fs/orangefs/orangefs-sysfs.c
+++ b/fs/orangefs/orangefs-sysfs.c
@@ -323,7 +323,7 @@ static ssize_t sysfs_service_op_show(struct kobject *kobj,
 	/* Can't do a service_operation if the client is not running... */
 	rc = is_daemon_in_service();
 	if (rc) {
-		pr_info("%s: Client not running :%d:\n",
+		pr_info_ratelimited("%s: Client not running :%d:\n",
 			__func__,
 			is_daemon_in_service());
 		goto out;
-- 
2.20.1

[PATCH AUTOSEL 4.14 102/115] pinctrl: gemini: Fix up TVC clock group

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit a85c928f6a7856a09e47d9b37faa3407c7ac6a8e ]

The previous fix made the TVC clock get muxed in on the
D-Link DIR-685 instead of giving nagging warnings of this
not working. Not good. We didn't want that, as it breaks
video.

Create a specific group for the TVC CLK, and break out
a specific GPIO group for it on the SL3516 so we can use
that line as GPIO if we don't need the TVC CLK.

Fixes: d17f477c5bc6 ("pinctrl: gemini: Mask and set properly")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-gemini.c | 44 ++++++++++++++++++++++++++------
 1 file changed, 36 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-gemini.c b/drivers/pinctrl/pinctrl-gemini.c
index 05441dc2519d2..78fa26c1a89f3 100644
--- a/drivers/pinctrl/pinctrl-gemini.c
+++ b/drivers/pinctrl/pinctrl-gemini.c
@@ -551,13 +551,16 @@ static const unsigned int tvc_3512_pins[] = {
 	319, /* TVC_DATA[1] */
 	301, /* TVC_DATA[2] */
 	283, /* TVC_DATA[3] */
-	265, /* TVC_CLK */
 	320, /* TVC_DATA[4] */
 	302, /* TVC_DATA[5] */
 	284, /* TVC_DATA[6] */
 	266, /* TVC_DATA[7] */
 };
 
+static const unsigned int tvc_clk_3512_pins[] = {
+	265, /* TVC_CLK */
+};
+
 /* NAND flash pins */
 static const unsigned int nflash_3512_pins[] = {
 	199, 200, 201, 202, 216, 217, 218, 219, 220, 234, 235, 236, 237, 252,
@@ -589,7 +592,7 @@ static const unsigned int pflash_3512_pins_extended[] = {
 /* Serial flash pins CE0, CE1, DI, DO, CK */
 static const unsigned int sflash_3512_pins[] = { 230, 231, 232, 233, 211 };
 
-/* The GPIO0A (0) pin overlap with TVC and extended parallel flash */
+/* The GPIO0A (0) pin overlap with TVC CLK and extended parallel flash */
 static const unsigned int gpio0a_3512_pins[] = { 265 };
 
 /* The GPIO0B (1-4) pins overlap with TVC and ICE */
@@ -772,7 +775,13 @@ static const struct gemini_pin_group gemini_3512_pin_groups[] = {
 		.num_pins = ARRAY_SIZE(tvc_3512_pins),
 		/* Conflict with character LCD and ICE */
 		.mask = LCD_PADS_ENABLE,
-		.value = TVC_PADS_ENABLE | TVC_CLK_PAD_ENABLE,
+		.value = TVC_PADS_ENABLE,
+	},
+	{
+		.name = "tvcclkgrp",
+		.pins = tvc_clk_3512_pins,
+		.num_pins = ARRAY_SIZE(tvc_clk_3512_pins),
+		.value = TVC_CLK_PAD_ENABLE,
 	},
 	/*
 	 * The construction is done such that it is possible to use a serial
@@ -809,8 +818,8 @@ static const struct gemini_pin_group gemini_3512_pin_groups[] = {
 		.name = "gpio0agrp",
 		.pins = gpio0a_3512_pins,
 		.num_pins = ARRAY_SIZE(gpio0a_3512_pins),
-		/* Conflict with TVC */
-		.mask = TVC_PADS_ENABLE,
+		/* Conflict with TVC CLK */
+		.mask = TVC_CLK_PAD_ENABLE,
 	},
 	{
 		.name = "gpio0bgrp",
@@ -1476,13 +1485,16 @@ static const unsigned int tvc_3516_pins[] = {
 	311, /* TVC_DATA[1] */
 	394, /* TVC_DATA[2] */
 	374, /* TVC_DATA[3] */
-	333, /* TVC_CLK */
 	354, /* TVC_DATA[4] */
 	395, /* TVC_DATA[5] */
 	312, /* TVC_DATA[6] */
 	334, /* TVC_DATA[7] */
 };
 
+static const unsigned int tvc_clk_3516_pins[] = {
+	333, /* TVC_CLK */
+};
+
 /* NAND flash pins */
 static const unsigned int nflash_3516_pins[] = {
 	243, 260, 261, 224, 280, 262, 281, 264, 300, 263, 282, 301, 320, 283,
@@ -1515,7 +1527,7 @@ static const unsigned int pflash_3516_pins_extended[] = {
 static const unsigned int sflash_3516_pins[] = { 296, 338, 295, 359, 339 };
 
 /* The GPIO0A (0-4) pins overlap with TVC and extended parallel flash */
-static const unsigned int gpio0a_3516_pins[] = { 333, 354, 395, 312, 334 };
+static const unsigned int gpio0a_3516_pins[] = { 354, 395, 312, 334 };
 
 /* The GPIO0B (5-7) pins overlap with ICE */
 static const unsigned int gpio0b_3516_pins[] = { 375, 396, 376 };
@@ -1547,6 +1559,9 @@ static const unsigned int gpio0j_3516_pins[] = { 359, 339 };
 /* The GPIO0K (30,31) pins overlap with NAND flash */
 static const unsigned int gpio0k_3516_pins[] = { 275, 298 };
 
+/* The GPIO0L (0) pins overlap with TVC_CLK */
+static const unsigned int gpio0l_3516_pins[] = { 333 };
+
 /* The GPIO1A (0-4) pins that overlap with IDE and parallel flash */
 static const unsigned int gpio1a_3516_pins[] = { 221, 200, 222, 201, 220 };
 
@@ -1693,7 +1708,13 @@ static const struct gemini_pin_group gemini_3516_pin_groups[] = {
 		.num_pins = ARRAY_SIZE(tvc_3516_pins),
 		/* Conflict with character LCD */
 		.mask = LCD_PADS_ENABLE,
-		.value = TVC_PADS_ENABLE | TVC_CLK_PAD_ENABLE,
+		.value = TVC_PADS_ENABLE,
+	},
+	{
+		.name = "tvcclkgrp",
+		.pins = tvc_clk_3516_pins,
+		.num_pins = ARRAY_SIZE(tvc_clk_3516_pins),
+		.value = TVC_CLK_PAD_ENABLE,
 	},
 	/*
 	 * The construction is done such that it is possible to use a serial
@@ -1804,6 +1825,13 @@ static const struct gemini_pin_group gemini_3516_pin_groups[] = {
 		/* Conflict with parallel and NAND flash */
 		.value = PFLASH_PADS_DISABLE | NAND_PADS_DISABLE,
 	},
+	{
+		.name = "gpio0lgrp",
+		.pins = gpio0l_3516_pins,
+		.num_pins = ARRAY_SIZE(gpio0l_3516_pins),
+		/* Conflict with TVE CLK */
+		.mask = TVC_CLK_PAD_ENABLE,
+	},
 	{
 		.name = "gpio1agrp",
 		.pins = gpio1a_3516_pins,
-- 
2.20.1

[PATCH AUTOSEL 4.14 103/115] hwmon: (pwm-fan) Silence error on probe deferral

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 9f67f7583e77fe5dc57aab3a6159c2642544eaad ]

Probe deferrals aren't actual errors, so silence the error message in
case the PWM cannot yet be acquired.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/pwm-fan.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index 6d30bec04f2d8..f981da686d7eb 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -221,8 +221,12 @@ static int pwm_fan_probe(struct platform_device *pdev)
 
 	ctx->pwm = devm_of_pwm_get(&pdev->dev, pdev->dev.of_node, NULL);
 	if (IS_ERR(ctx->pwm)) {
-		dev_err(&pdev->dev, "Could not get PWM\n");
-		return PTR_ERR(ctx->pwm);
+		ret = PTR_ERR(ctx->pwm);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get PWM: %d\n", ret);
+
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, ctx);
-- 
2.20.1

[PATCH AUTOSEL 4.14 104/115] hwmon: (ina3221) Fix INA3221_CONFIG_MODE macros

[Sasha Levin]

From: Nicolin Chen <nicoleotsuka@gmail.com>

[ Upstream commit 791ebc9d34e9d212fc03742c31654b017d385926 ]

The three INA3221_CONFIG_MODE macros are not correctly defined here.
The MODE3-1 bits are located at BIT 2-0 according to the datasheet.

So this patch just fixes them by shifting all of them with a correct
offset. However, this isn't a crital bug fix as the driver does not
use any of them at this point.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/ina3221.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
index e6b49500c52ae..8c9555313fc3d 100644
--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -38,9 +38,9 @@
 #define INA3221_WARN3			0x0c
 #define INA3221_MASK_ENABLE		0x0f
 
-#define INA3221_CONFIG_MODE_SHUNT	BIT(1)
-#define INA3221_CONFIG_MODE_BUS		BIT(2)
-#define INA3221_CONFIG_MODE_CONTINUOUS	BIT(3)
+#define INA3221_CONFIG_MODE_SHUNT	BIT(0)
+#define INA3221_CONFIG_MODE_BUS		BIT(1)
+#define INA3221_CONFIG_MODE_CONTINUOUS	BIT(2)
 
 #define INA3221_RSHUNT_DEFAULT		10000
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 105/115] netfilter: nft_compat: do not dump private area

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit d701d8117200399d85e63a737d2e4e897932f3b6 ]

Zero pad private area, otherwise we expose private kernel pointer to
userspace. This patch also zeroes the tail area after the ->matchsize
and ->targetsize that results from XT_ALIGN().

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_compat.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c
index 7344ec7fff2a7..8281656808aee 100644
--- a/net/netfilter/nft_compat.c
+++ b/net/netfilter/nft_compat.c
@@ -291,6 +291,24 @@ nft_target_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr)
 		module_put(me);
 }
 
+static int nft_extension_dump_info(struct sk_buff *skb, int attr,
+				   const void *info,
+				   unsigned int size, unsigned int user_size)
+{
+	unsigned int info_size, aligned_size = XT_ALIGN(size);
+	struct nlattr *nla;
+
+	nla = nla_reserve(skb, attr, aligned_size);
+	if (!nla)
+		return -1;
+
+	info_size = user_size ? : size;
+	memcpy(nla_data(nla), info, info_size);
+	memset(nla_data(nla) + info_size, 0, aligned_size - info_size);
+
+	return 0;
+}
+
 static int nft_target_dump(struct sk_buff *skb, const struct nft_expr *expr)
 {
 	const struct xt_target *target = expr->ops->data;
@@ -298,7 +316,8 @@ static int nft_target_dump(struct sk_buff *skb, const struct nft_expr *expr)
 
 	if (nla_put_string(skb, NFTA_TARGET_NAME, target->name) ||
 	    nla_put_be32(skb, NFTA_TARGET_REV, htonl(target->revision)) ||
-	    nla_put(skb, NFTA_TARGET_INFO, XT_ALIGN(target->targetsize), info))
+	    nft_extension_dump_info(skb, NFTA_TARGET_INFO, info,
+				    target->targetsize, target->usersize))
 		goto nla_put_failure;
 
 	return 0;
@@ -534,7 +553,8 @@ static int __nft_match_dump(struct sk_buff *skb, const struct nft_expr *expr,
 
 	if (nla_put_string(skb, NFTA_MATCH_NAME, match->name) ||
 	    nla_put_be32(skb, NFTA_MATCH_REV, htonl(match->revision)) ||
-	    nla_put(skb, NFTA_MATCH_INFO, XT_ALIGN(match->matchsize), info))
+	    nft_extension_dump_info(skb, NFTA_MATCH_INFO, info,
+				    match->matchsize, match->usersize))
 		goto nla_put_failure;
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 106/115] misc: cxl: Fix possible null pointer dereference

[Sasha Levin]

From: zhong jiang <zhongjiang@huawei.com>

[ Upstream commit 3dac3583bf1a61db6aaf31dfd752c677a4400afd ]

It is not safe to dereference an object before a null test. It is
not needed and just remove them. Ftrace can be used instead.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/cxl/guest.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/misc/cxl/guest.c b/drivers/misc/cxl/guest.c
index 1a64eb185cfd5..de2ce55395454 100644
--- a/drivers/misc/cxl/guest.c
+++ b/drivers/misc/cxl/guest.c
@@ -1028,8 +1028,6 @@ int cxl_guest_init_afu(struct cxl *adapter, int slice, struct device_node *afu_n
 
 void cxl_guest_remove_afu(struct cxl_afu *afu)
 {
-	pr_devel("in %s - AFU(%d)\n", __func__, afu->slice);
-
 	if (!afu)
 		return;
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 107/115] mac80211: minstrel: fix using short preamble CCK rates on HT clients

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 37439f2d6e43ae79e22be9be159f0af157468f82 ]

mi->supported[MINSTREL_CCK_GROUP] needs to be updated
short preamble rates need to be marked as supported regardless of
whether it's currently enabled. Its state can change at any time without
a rate_update call.

Fixes: 782dda00ab8e ("mac80211: minstrel_ht: move short preamble check out of get_rate")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rc80211_minstrel_ht.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 4a5bdad9f3030..25cb3e5f8b482 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -1132,7 +1132,6 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband,
 	struct ieee80211_mcs_info *mcs = &sta->ht_cap.mcs;
 	u16 sta_cap = sta->ht_cap.cap;
 	struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
-	struct sta_info *sinfo = container_of(sta, struct sta_info, sta);
 	int use_vht;
 	int n_supported = 0;
 	int ack_dur;
@@ -1258,8 +1257,7 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband,
 	if (!n_supported)
 		goto use_legacy;
 
-	if (test_sta_flag(sinfo, WLAN_STA_SHORT_PREAMBLE))
-		mi->cck_supported_short |= mi->cck_supported_short << 4;
+	mi->supported[MINSTREL_CCK_GROUP] |= mi->cck_supported_short << 4;
 
 	/* create an initial rate table with the lowest supported rates */
 	minstrel_ht_update_stats(mp, mi);
-- 
2.20.1

[PATCH AUTOSEL 4.14 108/115] mac80211: minstrel: fix CCK rate group streams value

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 80df9be67c44cb636bbc92caeddad8caf334c53c ]

Fixes a harmless underflow issue when CCK rates are actively being used

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rc80211_minstrel_ht.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 25cb3e5f8b482..bc97d31907f60 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -129,7 +129,7 @@
 
 #define CCK_GROUP					\
 	[MINSTREL_CCK_GROUP] = {			\
-		.streams = 0,				\
+		.streams = 1,				\
 		.flags = 0,				\
 		.duration = {				\
 			CCK_DURATION_LIST(false),	\
-- 
2.20.1

[PATCH AUTOSEL 4.14 109/115] mac80211: minstrel: fix sampling/reporting of CCK rates in HT mode

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 972b66b86f85f4e8201db454f4c3e9d990cf9836 ]

Long/short preamble selection cannot be sampled separately, since it
depends on the BSS state. Because of that, sampling attempts to
currently not used preamble modes are not counted in the statistics,
which leads to CCK rates being sampled too often.

Fix statistics accounting for long/short preamble by increasing the
index where necessary.
Fix excessive CCK rate sampling by dropping unsupported sample attempts.

This improves throughput on 2.4 GHz channels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rc80211_minstrel_ht.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index bc97d31907f60..e57811e4b91f6 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -282,7 +282,8 @@ minstrel_ht_get_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
 				break;
 
 		/* short preamble */
-		if (!(mi->supported[group] & BIT(idx)))
+		if ((mi->supported[group] & BIT(idx + 4)) &&
+		    (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE))
 			idx += 4;
 	}
 	return &mi->groups[group].rates[idx];
@@ -1077,18 +1078,23 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 		return;
 
 	sample_group = &minstrel_mcs_groups[sample_idx / MCS_GROUP_RATES];
+	sample_idx %= MCS_GROUP_RATES;
+
+	if (sample_group == &minstrel_mcs_groups[MINSTREL_CCK_GROUP] &&
+	    (sample_idx >= 4) != txrc->short_preamble)
+		return;
+
 	info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
 	rate->count = 1;
 
-	if (sample_idx / MCS_GROUP_RATES == MINSTREL_CCK_GROUP) {
+	if (sample_group == &minstrel_mcs_groups[MINSTREL_CCK_GROUP]) {
 		int idx = sample_idx % ARRAY_SIZE(mp->cck_rates);
 		rate->idx = mp->cck_rates[idx];
 	} else if (sample_group->flags & IEEE80211_TX_RC_VHT_MCS) {
 		ieee80211_rate_set_vht(rate, sample_idx % MCS_GROUP_RATES,
 				       sample_group->streams);
 	} else {
-		rate->idx = sample_idx % MCS_GROUP_RATES +
-			    (sample_group->streams - 1) * 8;
+		rate->idx = sample_idx + (sample_group->streams - 1) * 8;
 	}
 
 	rate->flags = sample_group->flags;
-- 
2.20.1

[PATCH AUTOSEL 4.14 110/115] spi: rockchip: initialize dma_slave_config properly

[Sasha Levin]

From: Huibin Hong <huibin.hong@rock-chips.com>

[ Upstream commit dd8fd2cbc73f8650f651da71fc61a6e4f30c1566 ]

The rxconf and txconf structs are allocated on the
stack, so make sure we zero them before filling out
the relevant fields.

Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-rockchip.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index fdcf3076681b5..185bbdce62b14 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -445,6 +445,9 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
 	struct dma_slave_config rxconf, txconf;
 	struct dma_async_tx_descriptor *rxdesc, *txdesc;
 
+	memset(&rxconf, 0, sizeof(rxconf));
+	memset(&txconf, 0, sizeof(txconf));
+
 	spin_lock_irqsave(&rs->lock, flags);
 	rs->state &= ~RXBUSY;
 	rs->state &= ~TXBUSY;
-- 
2.20.1

[PATCH AUTOSEL 4.14 111/115] mlxsw: spectrum_switchdev: Check notification relevance based on upper device

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 5050f6ae253ad1307af3486c26fc4f94287078b7 ]

VxLAN FDB updates are sent with the VxLAN device which is not our upper
and will therefore be ignored by current code.

Solve this by checking whether the upper device (bridge) is our upper.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index 8a1788108f52a..698de51b3fef0 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -1939,8 +1939,15 @@ static int mlxsw_sp_switchdev_event(struct notifier_block *unused,
 	struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
 	struct mlxsw_sp_switchdev_event_work *switchdev_work;
 	struct switchdev_notifier_fdb_info *fdb_info = ptr;
+	struct net_device *br_dev;
 
-	if (!mlxsw_sp_port_dev_lower_find_rcu(dev))
+	/* Tunnel devices are not our uppers, so check their master instead */
+	br_dev = netdev_master_upper_dev_get_rcu(dev);
+	if (!br_dev)
+		return NOTIFY_DONE;
+	if (!netif_is_bridge_master(br_dev))
+		return NOTIFY_DONE;
+	if (!mlxsw_sp_port_dev_lower_find_rcu(br_dev))
 		return NOTIFY_DONE;
 
 	switchdev_work = kzalloc(sizeof(*switchdev_work), GFP_ATOMIC);
-- 
2.20.1

[PATCH AUTOSEL 4.14 112/115] ARM: dts: omap5: Fix dual-role mode on Super-Speed port

[Sasha Levin]

From: Roger Quadros <rogerq@ti.com>

[ Upstream commit a763ecc15d0e37c3a15ff6825183061209832685 ]

OMAP5's Super-Speed USB port has a software mailbox register
that needs to be fed with VBUS and ID events from an external
VBUS/ID comparator.

Without this, Host role will not work correctly.

Fixes: 656c1a65ab55 ("ARM: dts: omap5: enable OTG role for DWC3 controller")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap5-board-common.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index f65343f8e1d69..c58f14de01451 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -695,6 +695,7 @@
 };
 
 &dwc3 {
+	extcon = <&extcon_usb3>;
 	dr_mode = "otg";
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 113/115] tools: PCI: Fix broken pcitest compilation

[Sasha Levin]

From: Alan Mikhak <alan.mikhak@sifive.com>

[ Upstream commit 8a5e0af240e07dd3d4897eb8ff52aab757da7fab ]

pcitest is currently broken due to the following compiler error
and related warning. Fix by changing the run_test() function
signature to return an integer result.

pcitest.c: In function run_test:
pcitest.c:143:9: warning: return with a value, in function
returning void
  return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */

pcitest.c: In function main:
pcitest.c:232:9: error: void value not ignored as it ought to be
  return run_test(test);

Fixes: fef31ecaaf2c ("tools: PCI: Fix compilation warnings")
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/pci/pcitest.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c
index 8ca1c62bc06db..7002df55826f4 100644
--- a/tools/pci/pcitest.c
+++ b/tools/pci/pcitest.c
@@ -42,15 +42,15 @@ struct pci_test {
 	unsigned long	size;
 };
 
-static void run_test(struct pci_test *test)
+static int run_test(struct pci_test *test)
 {
-	long ret;
+	int ret = -EINVAL;
 	int fd;
 
 	fd = open(test->device, O_RDWR);
 	if (fd < 0) {
 		perror("can't open PCI Endpoint Test device");
-		return;
+		return -ENODEV;
 	}
 
 	if (test->barnum >= 0 && test->barnum <= 5) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 114/115] powerpc/time: Fix clockevent_decrementer initalisation for PR KVM

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit b4d16ab58c41ff0125822464bdff074cebd0fe47 ]

In the recent commit 8b78fdb045de ("powerpc/time: Use
clockevents_register_device(), fixing an issue with large
decrementer") we changed the way we initialise the decrementer
clockevent(s).

We no longer initialise the mult & shift values of
decrementer_clockevent itself.

This has the effect of breaking PR KVM, because it uses those values
in kvmppc_emulate_dec(). The symptom is guest kernels spin forever
mid-way through boot.

For now fix it by assigning back to decrementer_clockevent the mult
and shift values.

Fixes: 8b78fdb045de ("powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/time.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 870e75d304591..7c7c5a16284d2 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -988,6 +988,10 @@ static void register_decrementer_clockevent(int cpu)
 
 	printk_once(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n",
 		    dec->name, dec->mult, dec->shift, cpu);
+
+	/* Set values for KVM, see kvm_emulate_dec() */
+	decrementer_clockevent.mult = dec->mult;
+	decrementer_clockevent.shift = dec->shift;
 }
 
 static void enable_large_decrementer(void)
-- 
2.20.1

[PATCH AUTOSEL 4.14 115/115] mmc: tmio: fix SCC error handling to avoid false positive CRC error

[Sasha Levin]

From: Takeshi Saito <takeshi.saito.xv@renesas.com>

[ Upstream commit 51b72656bb39fdcb8f3174f4007bcc83ad1d275f ]

If an SCC error occurs during a read/write command execution, a false
positive CRC error message is output.

mmcblk0: response CRC error sending r/w cmd command, card status 0x900

check_scc_error() checks SCC_RVSREQ.RVSERR bit. RVSERR detects a
correction error in the next (up or down) delay tap position. However,
since the command is successful, only retuning needs to be executed.
This has been confirmed by HW engineers.

Thus, on SCC error, set retuning flag instead of setting an error code.

Fixes: b85fb0a1c8ae ("mmc: tmio: Fix SCC error detection")
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[wsa: updated comment and commit message, removed some braces]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/tmio_mmc_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 01e51b7945750..2fd862dc97701 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -914,8 +914,9 @@ static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
 	if (mrq->cmd->error || (mrq->data && mrq->data->error))
 		tmio_mmc_abort_dma(host);
 
+	/* SCC error means retune, but executed command was still successful */
 	if (host->check_scc_error && host->check_scc_error(host))
-		mrq->cmd->error = -EILSEQ;
+		mmc_retune_needed(host->mmc);
 
 	/* If SET_BLOCK_COUNT, continue with main command */
 	if (host->mrq && !mrq->cmd->error) {
-- 
2.20.1

Re: [PATCH AUTOSEL 4.14 050/115] ARM: dts: da850-lego-ev3: slow down A/DC as much as possible

[David Lechner]

On 11/12/19 7:55 PM, Sasha Levin wrote:
> From: David Lechner <david@lechnology.com>
> 
> [ Upstream commit aea4762fb46e048c059ff49565ee33da07c8aeb3 ]
> 
> Due to the electrical design of the A/DC circuits on LEGO MINDSTORMS EV3,
> if we are reading analog values as fast as possible (i.e. using DMA to
> service the SPI) the A/DC chip will read incorrect values - as much as
> 0.1V off when the SPI is running at 10MHz. (This has to do with the
> capacitor charge time when channels are muxed in the A/DC.)
> 
> This patch slows down the SPI as much as possible (if CPU is at 456MHz,
> SPI runs at 1/2 of that, so 228MHz and has a max prescalar of 256, so
> we could get ~891kHz, but we're just rounding it to 1MHz). We also use
> the max allowable value for WDELAY to slow things down even more.
> 
> These changes reduce the error of the analog values to about 5mV, which
> is tolerable.
> 
> Commits a3762b13a596 ("spi: spi-davinci: Add support for SPI_CS_WORD")
> and e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce
> CPU usage") introduce changes that allow DMA transfers to be used, so
> this slow down is needed now.
> 

I doubt that the commits above would be backported, so it does not
make sense to backport this patch.

Re: [PATCH AUTOSEL 4.14 014/115] ata: ahci_brcm: Match BCM63138 compatible strings

[Florian Fainelli]

On 11/12/19 5:54 PM, Sasha Levin wrote:
> From: Florian Fainelli <f.fainelli@gmail.com>
> 
> [ Upstream commit fb8506f15f2e394f5f648575cf48a26e8744390c ]
> 
> Match the "brcm,bcm63138-ahci" compatible string in order to allow this
> driver to probe on such platforms.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> Signed-off-by: Jens Axboe <axboe@kernel.dk>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

This is a feature and not really a bug fix, is someone specifically
asking for this to be back ported? Also without the matching SATA PHY
driver changes:

7b69fa1c5c930886f8a916cc47096dd4044c007a ("phy: brcm-sata: Add BCM63138
(DSL) PHY init sequence")

this is pretty useless on its own. Same applies to all automatic
selections, not just this kernel obviously.

> ---
>  drivers/ata/ahci_brcm.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
> index 5936d1679bf3a..0a3998526bb1d 100644
> --- a/drivers/ata/ahci_brcm.c
> +++ b/drivers/ata/ahci_brcm.c
> @@ -297,6 +297,7 @@ static struct scsi_host_template ahci_platform_sht = {
>  static const struct of_device_id ahci_of_match[] = {
>  	{.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
>  	{.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
> +	{.compatible = "brcm,bcm63138-ahci", .data = (void *)BRCM_SATA_BCM7445},
>  	{.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
>  	{},
>  };
> 


-- 
Florian

Re: [PATCH AUTOSEL 4.14 014/115] ata: ahci_brcm: Match BCM63138 compatible strings

[Sasha Levin]

On Wed, Nov 13, 2019 at 12:07:25PM -0800, Florian Fainelli wrote:
>On 11/12/19 5:54 PM, Sasha Levin wrote:
>> From: Florian Fainelli <f.fainelli@gmail.com>
>>
>> [ Upstream commit fb8506f15f2e394f5f648575cf48a26e8744390c ]
>>
>> Match the "brcm,bcm63138-ahci" compatible string in order to allow this
>> driver to probe on such platforms.
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> Signed-off-by: Jens Axboe <axboe@kernel.dk>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>This is a feature and not really a bug fix, is someone specifically
>asking for this to be back ported? Also without the matching SATA PHY
>driver changes:
>
>7b69fa1c5c930886f8a916cc47096dd4044c007a ("phy: brcm-sata: Add BCM63138
>(DSL) PHY init sequence")
>
>this is pretty useless on its own. Same applies to all automatic
>selections, not just this kernel obviously.

Ah, I got it from a distro tree but I see the backported the driver too.
I'll drop it, thanks!

-- 
Thanks,
Sasha