[PATCH 1/5] rsi: fix use-after-free on failed probe and unbind

[PATCH 1/5] rsi: fix use-after-free on failed probe and unbind

[Johan Hovold]

Make sure to stop both URBs before returning after failed probe as well
as on disconnect to avoid use-after-free in the completion handler.

Reported-by: syzbot+b563b7f8dbe8223a51e8@syzkaller.appspotmail.com
Fixes: a4302bff28e2 ("rsi: add bluetooth rx endpoint")
Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver")
Cc: stable <stable@vger.kernel.org>     # 3.15
Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Cc: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_usb.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 53f41fc2cadf..30bed719486e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -292,6 +292,15 @@ static void rsi_rx_done_handler(struct urb *urb)
 		dev_kfree_skb(rx_cb->rx_skb);
 }
 
+static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
+{
+	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+	struct rx_usb_ctrl_block *rx_cb = &dev->rx_cb[ep_num - 1];
+	struct urb *urb = rx_cb->rx_urb;
+
+	usb_kill_urb(urb);
+}
+
 /**
  * rsi_rx_urb_submit() - This function submits the given URB to the USB stack.
  * @adapter: Pointer to the adapter structure.
@@ -823,10 +832,13 @@ static int rsi_probe(struct usb_interface *pfunction,
 	if (adapter->priv->coex_mode > 1) {
 		status = rsi_rx_urb_submit(adapter, BT_EP);
 		if (status)
-			goto err1;
+			goto err_kill_wlan_urb;
 	}
 
 	return 0;
+
+err_kill_wlan_urb:
+	rsi_rx_urb_kill(adapter, WLAN_EP);
 err1:
 	rsi_deinit_usb_interface(adapter);
 err:
@@ -857,6 +869,10 @@ static void rsi_disconnect(struct usb_interface *pfunction)
 		adapter->priv->bt_adapter = NULL;
 	}
 
+	if (adapter->priv->coex_mode > 1)
+		rsi_rx_urb_kill(adapter, BT_EP);
+	rsi_rx_urb_kill(adapter, WLAN_EP);
+
 	rsi_reset_card(adapter);
 	rsi_deinit_usb_interface(adapter);
 	rsi_91x_deinit(adapter);
-- 
2.24.0

Re: [PATCH 1/5] rsi: fix use-after-free on failed probe and unbind

[Kalle Valo]

Johan Hovold <johan@kernel.org> wrote:

> Make sure to stop both URBs before returning after failed probe as well
> as on disconnect to avoid use-after-free in the completion handler.
> 
> Reported-by: syzbot+b563b7f8dbe8223a51e8@syzkaller.appspotmail.com
> Fixes: a4302bff28e2 ("rsi: add bluetooth rx endpoint")
> Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver")
> Cc: stable <stable@vger.kernel.org>     # 3.15
> Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
> Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
> Cc: Fariya Fatima <fariyaf@gmail.com>
> Signed-off-by: Johan Hovold <johan@kernel.org>

5 patches applied to wireless-drivers-next.git, thanks.

e93cd35101b6 rsi: fix use-after-free on failed probe and unbind
92aafe77123a rsi: fix use-after-free on probe errors
477682974811 rsi: fix memory leak on failed URB submission
b9b9f9fea218 rsi: fix non-atomic allocation in completion handler
960da557f435 rsi: add missing endpoint sanity checks

-- 
https://patchwork.kernel.org/patch/11266455/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH 2/5] rsi: fix use-after-free on probe errors

[Johan Hovold]

The driver would fail to stop the command timer in most error paths,
something which specifically could lead to the timer being freed while
still active on I/O errors during probe.

Fix this by making sure that each function starting the timer also stops
it in all relevant error paths.

Reported-by: syzbot+1d1597a5aa3679c65b9f@syzkaller.appspotmail.com
Fixes: b78e91bcfb33 ("rsi: Add new firmware loading method")
Cc: stable <stable@vger.kernel.org>     # 4.12
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_hal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_hal.c b/drivers/net/wireless/rsi/rsi_91x_hal.c
index f84250bdb8cf..6f8d5f9a9f7e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_hal.c
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -622,6 +622,7 @@ static int bl_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp, char *str)
 	bl_start_cmd_timer(adapter, timeout);
 	status = bl_write_cmd(adapter, cmd, exp_resp, &regout_val);
 	if (status < 0) {
+		bl_stop_cmd_timer(adapter);
 		rsi_dbg(ERR_ZONE,
 			"%s: Command %s (%0x) writing failed..\n",
 			__func__, str, cmd);
@@ -737,10 +738,9 @@ static int ping_pong_write(struct rsi_hw *adapter, u8 cmd, u8 *addr, u32 size)
 	}
 
 	status = bl_cmd(adapter, cmd_req, cmd_resp, str);
-	if (status) {
-		bl_stop_cmd_timer(adapter);
+	if (status)
 		return status;
-	}
+
 	return 0;
 }
 
@@ -828,10 +828,9 @@ static int auto_fw_upgrade(struct rsi_hw *adapter, u8 *flash_content,
 
 	status = bl_cmd(adapter, EOF_REACHED, FW_LOADING_SUCCESSFUL,
 			"EOF_REACHED");
-	if (status) {
-		bl_stop_cmd_timer(adapter);
+	if (status)
 		return status;
-	}
+
 	rsi_dbg(INFO_ZONE, "FW loading is done and FW is running..\n");
 	return 0;
 }
@@ -849,6 +848,7 @@ static int rsi_hal_prepare_fwload(struct rsi_hw *adapter)
 						  &regout_val,
 						  RSI_COMMON_REG_SIZE);
 		if (status < 0) {
+			bl_stop_cmd_timer(adapter);
 			rsi_dbg(ERR_ZONE,
 				"%s: REGOUT read failed\n", __func__);
 			return status;
-- 
2.24.0

[PATCH 3/5] rsi: fix memory leak on failed URB submission

[Johan Hovold]

Make sure to free the skb on failed receive-URB submission (e.g. on
disconnect or currently also due to a missing endpoint).

Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface")
Cc: stable <stable@vger.kernel.org>     # 4.17
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 30bed719486e..2c869df1c62e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -338,8 +338,10 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
 			  rx_cb);
 
 	status = usb_submit_urb(urb, GFP_KERNEL);
-	if (status)
+	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__);
+		dev_kfree_skb(skb);
+	}
 
 	return status;
 }
-- 
2.24.0

[PATCH 4/5] rsi: fix non-atomic allocation in completion handler

[Johan Hovold]

USB completion handlers are called in atomic context and must
specifically not allocate memory using GFP_KERNEL.

Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface")
Cc: stable <stable@vger.kernel.org> # 4.17
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_usb.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 2c869df1c62e..ead75574e10a 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/types.h>
 #include <net/rsi_91x.h>
 #include "rsi_usb.h"
 #include "rsi_hal.h"
@@ -29,7 +30,7 @@ MODULE_PARM_DESC(dev_oper_mode,
 		 "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
 		 "6[AP + BT classic], 14[AP + BT classic + BT LE]");
 
-static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num);
+static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t flags);
 
 /**
  * rsi_usb_card_write() - This function writes to the USB Card.
@@ -285,7 +286,7 @@ static void rsi_rx_done_handler(struct urb *urb)
 	status = 0;
 
 out:
-	if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num))
+	if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num, GFP_ATOMIC))
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission", __func__);
 
 	if (status)
@@ -307,7 +308,7 @@ static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
  *
  * Return: 0 on success, a negative error code on failure.
  */
-static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
+static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t mem_flags)
 {
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 	struct rx_usb_ctrl_block *rx_cb = &dev->rx_cb[ep_num - 1];
@@ -337,7 +338,7 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
 			  rsi_rx_done_handler,
 			  rx_cb);
 
-	status = usb_submit_urb(urb, GFP_KERNEL);
+	status = usb_submit_urb(urb, mem_flags);
 	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__);
 		dev_kfree_skb(skb);
@@ -827,12 +828,12 @@ static int rsi_probe(struct usb_interface *pfunction,
 		rsi_dbg(INIT_ZONE, "%s: Device Init Done\n", __func__);
 	}
 
-	status = rsi_rx_urb_submit(adapter, WLAN_EP);
+	status = rsi_rx_urb_submit(adapter, WLAN_EP, GFP_KERNEL);
 	if (status)
 		goto err1;
 
 	if (adapter->priv->coex_mode > 1) {
-		status = rsi_rx_urb_submit(adapter, BT_EP);
+		status = rsi_rx_urb_submit(adapter, BT_EP, GFP_KERNEL);
 		if (status)
 			goto err_kill_wlan_urb;
 	}
-- 
2.24.0