[PATCH 4.9 00/30] 4.9.280-rc1 review

[PATCH 4.9 00/30] 4.9.280-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.280 release.
There are 30 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 15 Aug 2021 15:05:12 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.280-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.280-rc1

Miklos Szeredi <mszeredi@redhat.com>
    ovl: prevent private clone if bind mount is not allowed

YueHaibing <yuehaibing@huawei.com>
    net: xilinx_emaclite: Do not print real IOMEM pointer

Pali Rohár <pali@kernel.org>
    ppp: Fix generating ppp unit id when ifname is not specified

Longfang Liu <liulongfang@huawei.com>
    USB:ehci:fix Kunpeng920 ehci hardware problem

Letu Ren <fantasquex@gmail.com>
    net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset

Prarit Bhargava <prarit@redhat.com>
    alpha: Send stop IPI to send to online CPUs

Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
    reiserfs: check directory items on read from disk

Yu Kuai <yukuai3@huawei.com>
    reiserfs: add check for root_inode in reiserfs_fill_super

Like Xu <likexu@tencent.com>
    perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest

Zheyu Ma <zheyuma97@gmail.com>
    pcmcia: i82092: fix a null pointer dereference bug

Maciej W. Rozycki <macro@orcam.me.uk>
    MIPS: Malta: Do not byte-swap accesses to the CBUS UART

Maciej W. Rozycki <macro@orcam.me.uk>
    serial: 8250: Mask out floating 16/32-bit bus bits

Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
    pipe: increase minimum default pipe size to 2 pages

Johan Hovold <johan@kernel.org>
    media: rtl28xxu: fix zero-length control request

Hui Su <suhui@zeku.com>
    scripts/tracing: fix the bug that can't parse raw_trace_func

Dmitry Osipenko <digetx@gmail.com>
    usb: otg-fsm: Fix hrtimer list corruption

David Bauer <mail@david-bauer.net>
    USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2

Willy Tarreau <w@1wt.eu>
    USB: serial: ch341: fix character loss at high transfer rates

Daniele Palmas <dnlplm@gmail.com>
    USB: serial: option: add Telit FD980 composition 0x1056

Qiang.zhang <qiang.zhang@windriver.com>
    USB: usbtmc: Fix RCU stall warning

Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
    Bluetooth: defer cleanup of resources in hci_unregister_dev()

Pavel Skripkin <paskripkin@gmail.com>
    net: vxge: fix use-after-free in vxge_device_unregister

Pavel Skripkin <paskripkin@gmail.com>
    net: fec: fix use-after-free in fec_drv_remove

Pavel Skripkin <paskripkin@gmail.com>
    net: pegasus: fix uninit-value in get_interrupt_interval

Dan Carpenter <dan.carpenter@oracle.com>
    bnx2x: fix an error code in bnx2x_nic_load()

H. Nikolaus Schaller <hns@goldelico.com>
    mips: Fix non-POSIX regexp

Wang Hai <wanghai38@huawei.com>
    net: natsemi: Fix missing pci_disable_device() in probe and remove

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: videobuf2-core: dequeue if start_streaming fails

Li Manyi <limanyi@uniontech.com>
    scsi: sr: Return correct event when media event code is 3

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix racy deletion of subscriber


-------------

Diffstat:

 Makefile                                        |  4 +-
 arch/alpha/kernel/smp.c                         |  2 +-
 arch/mips/Makefile                              |  2 +-
 arch/mips/mti-malta/malta-platform.c            |  3 +-
 arch/x86/events/perf_event.h                    |  3 +-
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c         | 11 +++++-
 drivers/media/v4l2-core/videobuf2-core.c        | 13 ++++++-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c |  3 +-
 drivers/net/ethernet/freescale/fec_main.c       |  2 +-
 drivers/net/ethernet/natsemi/natsemi.c          |  8 +---
 drivers/net/ethernet/neterion/vxge/vxge-main.c  |  6 +--
 drivers/net/ethernet/qlogic/qla3xxx.c           |  6 +--
 drivers/net/ethernet/xilinx/xilinx_emaclite.c   |  5 +--
 drivers/net/ppp/ppp_generic.c                   | 19 ++++++++--
 drivers/net/usb/pegasus.c                       | 14 +++++--
 drivers/pcmcia/i82092.c                         |  1 +
 drivers/scsi/sr.c                               |  2 +-
 drivers/tty/serial/8250/8250_port.c             | 12 ++++--
 drivers/usb/class/usbtmc.c                      |  8 +---
 drivers/usb/common/usb-otg-fsm.c                |  6 ++-
 drivers/usb/host/ehci-pci.c                     |  3 ++
 drivers/usb/serial/ch341.c                      |  1 +
 drivers/usb/serial/ftdi_sio.c                   |  1 +
 drivers/usb/serial/ftdi_sio_ids.h               |  3 ++
 drivers/usb/serial/option.c                     |  2 +
 fs/namespace.c                                  | 42 +++++++++++++--------
 fs/pipe.c                                       | 19 +++++++++-
 fs/reiserfs/stree.c                             | 31 +++++++++++++---
 fs/reiserfs/super.c                             |  8 ++++
 include/linux/usb/otg-fsm.h                     |  1 +
 include/net/bluetooth/hci_core.h                |  1 +
 net/bluetooth/hci_core.c                        | 16 ++++----
 net/bluetooth/hci_sock.c                        | 49 +++++++++++++++++--------
 net/bluetooth/hci_sysfs.c                       |  3 ++
 scripts/tracing/draw_functrace.py               |  6 +--
 sound/core/seq/seq_ports.c                      | 39 ++++++++++++++------
 36 files changed, 250 insertions(+), 105 deletions(-)

[PATCH 4.9 01/30] ALSA: seq: Fix racy deletion of subscriber

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 97367c97226aab8b298ada954ce12659ee3ad2a4 upstream.

It turned out that the current implementation of the port subscription
is racy.  The subscription contains two linked lists, and we have to
add to or delete from both lists.  Since both connection and
disconnection procedures perform the same order for those two lists
(i.e. src list, then dest list), when a deletion happens during a
connection procedure, the src list may be deleted before the dest list
addition completes, and this may lead to a use-after-free or an Oops,
even though the access to both lists are protected via mutex.

The simple workaround for this race is to change the access order for
the disconnection, namely, dest list, then src list.  This assures
that the connection has been established when disconnecting, and also
the concurrent deletion can be avoided.

Reported-and-tested-by: folkert <folkert@vanheusden.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210801182754.GP890690@belle.intranet.vanheusden.com
Link: https://lore.kernel.org/r/20210803114312.2536-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/seq/seq_ports.c |   39 +++++++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 12 deletions(-)

--- a/sound/core/seq/seq_ports.c
+++ b/sound/core/seq/seq_ports.c
@@ -532,10 +532,11 @@ static int check_and_subscribe_port(stru
 	return err;
 }
 
-static void delete_and_unsubscribe_port(struct snd_seq_client *client,
-					struct snd_seq_client_port *port,
-					struct snd_seq_subscribers *subs,
-					bool is_src, bool ack)
+/* called with grp->list_mutex held */
+static void __delete_and_unsubscribe_port(struct snd_seq_client *client,
+					  struct snd_seq_client_port *port,
+					  struct snd_seq_subscribers *subs,
+					  bool is_src, bool ack)
 {
 	struct snd_seq_port_subs_info *grp;
 	struct list_head *list;
@@ -543,7 +544,6 @@ static void delete_and_unsubscribe_port(
 
 	grp = is_src ? &port->c_src : &port->c_dest;
 	list = is_src ? &subs->src_list : &subs->dest_list;
-	down_write(&grp->list_mutex);
 	write_lock_irq(&grp->list_lock);
 	empty = list_empty(list);
 	if (!empty)
@@ -553,6 +553,18 @@ static void delete_and_unsubscribe_port(
 
 	if (!empty)
 		unsubscribe_port(client, port, grp, &subs->info, ack);
+}
+
+static void delete_and_unsubscribe_port(struct snd_seq_client *client,
+					struct snd_seq_client_port *port,
+					struct snd_seq_subscribers *subs,
+					bool is_src, bool ack)
+{
+	struct snd_seq_port_subs_info *grp;
+
+	grp = is_src ? &port->c_src : &port->c_dest;
+	down_write(&grp->list_mutex);
+	__delete_and_unsubscribe_port(client, port, subs, is_src, ack);
 	up_write(&grp->list_mutex);
 }
 
@@ -608,27 +620,30 @@ int snd_seq_port_disconnect(struct snd_s
 			    struct snd_seq_client_port *dest_port,
 			    struct snd_seq_port_subscribe *info)
 {
-	struct snd_seq_port_subs_info *src = &src_port->c_src;
+	struct snd_seq_port_subs_info *dest = &dest_port->c_dest;
 	struct snd_seq_subscribers *subs;
 	int err = -ENOENT;
 
-	down_write(&src->list_mutex);
+	/* always start from deleting the dest port for avoiding concurrent
+	 * deletions
+	 */
+	down_write(&dest->list_mutex);
 	/* look for the connection */
-	list_for_each_entry(subs, &src->list_head, src_list) {
+	list_for_each_entry(subs, &dest->list_head, dest_list) {
 		if (match_subs_info(info, &subs->info)) {
-			atomic_dec(&subs->ref_count); /* mark as not ready */
+			__delete_and_unsubscribe_port(dest_client, dest_port,
+						      subs, false,
+						      connector->number != dest_client->number);
 			err = 0;
 			break;
 		}
 	}
-	up_write(&src->list_mutex);
+	up_write(&dest->list_mutex);
 	if (err < 0)
 		return err;
 
 	delete_and_unsubscribe_port(src_client, src_port, subs, true,
 				    connector->number != src_client->number);
-	delete_and_unsubscribe_port(dest_client, dest_port, subs, false,
-				    connector->number != dest_client->number);
 	kfree(subs);
 	return 0;
 }

[PATCH 4.9 02/30] scsi: sr: Return correct event when media event code is 3

[Greg Kroah-Hartman]

From: Li Manyi <limanyi@uniontech.com>

[ Upstream commit 5c04243a56a7977185b00400e59ca7e108004faf ]

Media event code 3 is defined in the MMC-6 spec as follows:

  "MediaRemoval: The media has been removed from the specified slot, and
   the Drive is unable to access the media without user intervention. This
   applies to media changers only."

This indicated that treating the condition as an EJECT_REQUEST was
appropriate. However, doing so had the unfortunate side-effect of causing
the drive tray to be physically ejected on resume. Instead treat the event
as a MEDIA_CHANGE request.

Fixes: 7dd753ca59d6 ("scsi: sr: Return appropriate error code when disk is ejected")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213759
Link: https://lore.kernel.org/r/20210726114913.6760-1-limanyi@uniontech.com
Signed-off-by: Li Manyi <limanyi@uniontech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 5e51a39a0c27..9b63e46edffc 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -217,7 +217,7 @@ static unsigned int sr_get_events(struct scsi_device *sdev)
 	else if (med->media_event_code == 2)
 		return DISK_EVENT_MEDIA_CHANGE;
 	else if (med->media_event_code == 3)
-		return DISK_EVENT_EJECT_REQUEST;
+		return DISK_EVENT_MEDIA_CHANGE;
 	return 0;
 }
 
-- 
2.30.2

[PATCH 4.9 03/30] media: videobuf2-core: dequeue if start_streaming fails

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit c592b46907adbeb81243f7eb7a468c36692658b8 ]

If a vb2_queue sets q->min_buffers_needed then when the number of
queued buffers reaches q->min_buffers_needed, vb2_core_qbuf() will call
the start_streaming() callback. If start_streaming() returns an error,
then that error was just returned by vb2_core_qbuf(), but the buffer
was still queued. However, userspace expects that if VIDIOC_QBUF fails,
the buffer is returned dequeued.

So if start_streaming() fails, then remove the buffer from the queue,
thus avoiding this unwanted side-effect.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Fixes: b3379c6201bb ("[media] vb2: only call start_streaming if sufficient buffers are queued")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/videobuf2-core.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
index b1a4d4e2341b..3ac9f7260e72 100644
--- a/drivers/media/v4l2-core/videobuf2-core.c
+++ b/drivers/media/v4l2-core/videobuf2-core.c
@@ -1370,6 +1370,7 @@ static int vb2_start_streaming(struct vb2_queue *q)
 int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb)
 {
 	struct vb2_buffer *vb;
+	enum vb2_buffer_state orig_state;
 	int ret;
 
 	if (q->error) {
@@ -1399,6 +1400,7 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb)
 	 * Add to the queued buffers list, a buffer will stay on it until
 	 * dequeued in dqbuf.
 	 */
+	orig_state = vb->state;
 	list_add_tail(&vb->queued_entry, &q->queued_list);
 	q->queued_count++;
 	q->waiting_for_buffers = false;
@@ -1429,8 +1431,17 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb)
 	if (q->streaming && !q->start_streaming_called &&
 	    q->queued_count >= q->min_buffers_needed) {
 		ret = vb2_start_streaming(q);
-		if (ret)
+		if (ret) {
+			/*
+			 * Since vb2_core_qbuf will return with an error,
+			 * we should return it to state DEQUEUED since
+			 * the error indicates that the buffer wasn't queued.
+			 */
+			list_del(&vb->queued_entry);
+			q->queued_count--;
+			vb->state = orig_state;
 			return ret;
+		}
 	}
 
 	dprintk(1, "qbuf of buffer %d succeeded\n", vb->index);
-- 
2.30.2

[PATCH 4.9 04/30] net: natsemi: Fix missing pci_disable_device() in probe and remove

[Greg Kroah-Hartman]

From: Wang Hai <wanghai38@huawei.com>

[ Upstream commit 7fe74dfd41c428afb24e2e615470832fa997ff14 ]

Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/natsemi/natsemi.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c
index ed89029ff75b..c0e128e17321 100644
--- a/drivers/net/ethernet/natsemi/natsemi.c
+++ b/drivers/net/ethernet/natsemi/natsemi.c
@@ -817,7 +817,7 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
 		printk(version);
 #endif
 
-	i = pci_enable_device(pdev);
+	i = pcim_enable_device(pdev);
 	if (i) return i;
 
 	/* natsemi has a non-standard PM control register
@@ -850,7 +850,7 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
 	ioaddr = ioremap(iostart, iosize);
 	if (!ioaddr) {
 		i = -ENOMEM;
-		goto err_ioremap;
+		goto err_pci_request_regions;
 	}
 
 	/* Work around the dropped serial bit. */
@@ -968,9 +968,6 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
  err_register_netdev:
 	iounmap(ioaddr);
 
- err_ioremap:
-	pci_release_regions(pdev);
-
  err_pci_request_regions:
 	free_netdev(dev);
 	return i;
@@ -3228,7 +3225,6 @@ static void natsemi_remove1(struct pci_dev *pdev)
 
 	NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround);
 	unregister_netdev (dev);
-	pci_release_regions (pdev);
 	iounmap(ioaddr);
 	free_netdev (dev);
 }
-- 
2.30.2

[PATCH 4.9 05/30] mips: Fix non-POSIX regexp

[Greg Kroah-Hartman]

From: H. Nikolaus Schaller <hns@goldelico.com>

[ Upstream commit 28bbbb9875a35975904e46f9b06fa689d051b290 ]

When cross compiling a MIPS kernel on a BSD based HOSTCC leads
to errors like

  SYNC    include/config/auto.conf.cmd - due to: .config
egrep: empty (sub)expression
  UPD     include/config/kernel.release
  HOSTCC  scripts/dtc/dtc.o - due to target missing

It turns out that egrep uses this egrep pattern:

		(|MINOR_|PATCHLEVEL_)

This is not valid syntax or gives undefined results according
to POSIX 9.5.3 ERE Grammar

	https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html

It seems to be silently accepted by the Linux egrep implementation
while a BSD host complains.

Such patterns can be replaced by a transformation like

	"(|p1|p2)" -> "(p1|p2)?"

Fixes: 48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 25f3bfef9b39..af4eff7d22ec 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -286,7 +286,7 @@ LDFLAGS			+= -m $(ld-emul)
 
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
-	egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
+	egrep -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
 	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
 ifdef CONFIG_64BIT
 CHECKFLAGS		+= -m64
-- 
2.30.2

[PATCH 4.9 06/30] bnx2x: fix an error code in bnx2x_nic_load()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit fb653827c758725b149b5c924a5eb50ab4812750 ]

Set the error code if bnx2x_alloc_fw_stats_mem() fails.  The current
code returns success.

Fixes: ad5afc89365e ("bnx2x: Separate VF and PF logic")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 46a7dcf2ff4a..9d7f491931ce 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2672,7 +2672,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	}
 
 	/* Allocated memory for FW statistics  */
-	if (bnx2x_alloc_fw_stats_mem(bp))
+	rc = bnx2x_alloc_fw_stats_mem(bp);
+	if (rc)
 		LOAD_ERROR_EXIT(bp, load_error0);
 
 	/* request pf to initialize status blocks */
-- 
2.30.2

[PATCH 4.9 07/30] net: pegasus: fix uninit-value in get_interrupt_interval

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit af35fc37354cda3c9c8cc4961b1d24bdc9d27903 ]

Syzbot reported uninit value pegasus_probe(). The problem was in missing
error handling.

get_interrupt_interval() internally calls read_eprom_word() which can
fail in some cases. For example: failed to receive usb control message.
These cases should be handled to prevent uninit value bug, since
read_eprom_word() will not initialize passed stack variable in case of
internal failure.

Fail log:

BUG: KMSAN: uninit-value in get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline]
BUG: KMSAN: uninit-value in pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152
CPU: 1 PID: 825 Comm: kworker/1:1 Not tainted 5.12.0-rc6-syzkaller #0
...
Workqueue: usb_hub_wq hub_event
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x24c/0x2e0 lib/dump_stack.c:120
 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x5c/0xa0 mm/kmsan/kmsan_instr.c:197
 get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline]
 pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152
....

Local variable ----data.i@pegasus_probe created at:
 get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline]
 pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152
 get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline]
 pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152

Reported-and-tested-by: syzbot+02c9f70f3afae308464a@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210804143005.439-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/pegasus.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 5fe9f1273fe2..6cfc6faf9747 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -755,12 +755,16 @@ static inline void disable_net_traffic(pegasus_t *pegasus)
 	set_registers(pegasus, EthCtrl0, sizeof(tmp), &tmp);
 }
 
-static inline void get_interrupt_interval(pegasus_t *pegasus)
+static inline int get_interrupt_interval(pegasus_t *pegasus)
 {
 	u16 data;
 	u8 interval;
+	int ret;
+
+	ret = read_eprom_word(pegasus, 4, &data);
+	if (ret < 0)
+		return ret;
 
-	read_eprom_word(pegasus, 4, &data);
 	interval = data >> 8;
 	if (pegasus->usb->speed != USB_SPEED_HIGH) {
 		if (interval < 0x80) {
@@ -775,6 +779,8 @@ static inline void get_interrupt_interval(pegasus_t *pegasus)
 		}
 	}
 	pegasus->intr_interval = interval;
+
+	return 0;
 }
 
 static void set_carrier(struct net_device *net)
@@ -1191,7 +1197,9 @@ static int pegasus_probe(struct usb_interface *intf,
 				| NETIF_MSG_PROBE | NETIF_MSG_LINK);
 
 	pegasus->features = usb_dev_id[dev_index].private;
-	get_interrupt_interval(pegasus);
+	res = get_interrupt_interval(pegasus);
+	if (res)
+		goto out2;
 	if (reset_mac(pegasus)) {
 		dev_err(&intf->dev, "can't reset MAC\n");
 		res = -EIO;
-- 
2.30.2

[PATCH 4.9 08/30] net: fec: fix use-after-free in fec_drv_remove

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit 44712965bf12ae1758cec4de53816ed4b914ca1a ]

Smatch says:
	drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);
	drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);

Since fep pointer is netdev private data, accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 9b3ea0406e0d..5fc40f025d21 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3546,13 +3546,13 @@ fec_drv_remove(struct platform_device *pdev)
 	if (of_phy_is_fixed_link(np))
 		of_phy_deregister_fixed_link(np);
 	of_node_put(fep->phy_node);
-	free_netdev(ndev);
 
 	clk_disable_unprepare(fep->clk_ahb);
 	clk_disable_unprepare(fep->clk_ipg);
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
+	free_netdev(ndev);
 	return 0;
 }
 
-- 
2.30.2

[PATCH 4.9 09/30] net: vxge: fix use-after-free in vxge_device_unregister

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit 942e560a3d3862dd5dee1411dbdd7097d29b8416 ]

Smatch says:
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);

Since vdev pointer is netdev private data accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function

Fixes: 6cca200362b4 ("vxge: cleanup probe error paths")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/neterion/vxge/vxge-main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index e0993eba5df3..c6950e580883 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -3539,13 +3539,13 @@ static void vxge_device_unregister(struct __vxge_hw_device *hldev)
 
 	kfree(vdev->vpaths);
 
-	/* we are safe to free it now */
-	free_netdev(dev);
-
 	vxge_debug_init(vdev->level_trace, "%s: ethernet device unregistered",
 			buf);
 	vxge_debug_entryexit(vdev->level_trace,	"%s: %s:%d  Exiting...", buf,
 			     __func__, __LINE__);
+
+	/* we are safe to free it now */
+	free_netdev(dev);
 }
 
 /*
-- 
2.30.2

[PATCH 4.9 10/30] Bluetooth: defer cleanup of resources in hci_unregister_dev()

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>

[ Upstream commit e04480920d1eec9c061841399aa6f35b6f987d8b ]

syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to
calling lock_sock() with rw spinlock held [1].

It seems that history of this locking problem is a trial and error.

Commit b40df5743ee8 ("[PATCH] bluetooth: fix socket locking in
hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to
lock_sock() as an attempt to fix lockdep warning.

Then, commit 4ce61d1c7a8e ("[BLUETOOTH]: Fix locking in
hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to
local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the
sleep in atomic context warning.

Then, commit 4b5dd696f81b ("Bluetooth: Remove local_bh_disable() from
hci_sock.c") in 3.3-rc1 removed local_bh_disable().

Then, commit e305509e678b ("Bluetooth: use correct lock to prevent UAF
of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to
lock_sock() as an attempt to fix CVE-2021-3573.

This difficulty comes from current implementation that
hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all
references from sockets because hci_unregister_dev() immediately
reclaims resources as soon as returning from
hci_sock_dev_event(HCI_DEV_UNREG).

But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not
doing what it should do.

Therefore, instead of trying to detach sockets from device, let's accept
not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG),
by moving actual cleanup of resources from hci_unregister_dev() to
hci_cleanup_dev() which is called by bt_host_release() when all
references to this unregistered device (which is a kobject) are gone.

Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets
hci_pi(sk)->hdev, we need to check whether this device was unregistered
and return an error based on HCI_UNREGISTER flag.  There might be subtle
behavioral difference in "monitor the hdev" functionality; please report
if you found something went wrong due to this patch.

Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1]
Reported-by: syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object")
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci_core.h |  1 +
 net/bluetooth/hci_core.c         | 16 +++++------
 net/bluetooth/hci_sock.c         | 49 +++++++++++++++++++++-----------
 net/bluetooth/hci_sysfs.c        |  3 ++
 4 files changed, 45 insertions(+), 24 deletions(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 33db6c6d3fba..819796fb9d46 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1028,6 +1028,7 @@ struct hci_dev *hci_alloc_dev(void);
 void hci_free_dev(struct hci_dev *hdev);
 int hci_register_dev(struct hci_dev *hdev);
 void hci_unregister_dev(struct hci_dev *hdev);
+void hci_cleanup_dev(struct hci_dev *hdev);
 int hci_suspend_dev(struct hci_dev *hdev);
 int hci_resume_dev(struct hci_dev *hdev);
 int hci_reset_dev(struct hci_dev *hdev);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 839c534bdcdb..8517da7f282e 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3146,14 +3146,10 @@ EXPORT_SYMBOL(hci_register_dev);
 /* Unregister HCI device */
 void hci_unregister_dev(struct hci_dev *hdev)
 {
-	int id;
-
 	BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus);
 
 	hci_dev_set_flag(hdev, HCI_UNREGISTER);
 
-	id = hdev->id;
-
 	write_lock(&hci_dev_list_lock);
 	list_del(&hdev->list);
 	write_unlock(&hci_dev_list_lock);
@@ -3182,7 +3178,14 @@ void hci_unregister_dev(struct hci_dev *hdev)
 	}
 
 	device_del(&hdev->dev);
+	/* Actual cleanup is deferred until hci_cleanup_dev(). */
+	hci_dev_put(hdev);
+}
+EXPORT_SYMBOL(hci_unregister_dev);
 
+/* Cleanup HCI device */
+void hci_cleanup_dev(struct hci_dev *hdev)
+{
 	debugfs_remove_recursive(hdev->debugfs);
 	kfree_const(hdev->hw_info);
 	kfree_const(hdev->fw_info);
@@ -3204,11 +3207,8 @@ void hci_unregister_dev(struct hci_dev *hdev)
 	hci_discovery_filter_clear(hdev);
 	hci_dev_unlock(hdev);
 
-	hci_dev_put(hdev);
-
-	ida_simple_remove(&hci_index_ida, id);
+	ida_simple_remove(&hci_index_ida, hdev->id);
 }
-EXPORT_SYMBOL(hci_unregister_dev);
 
 /* Suspend HCI device */
 int hci_suspend_dev(struct hci_dev *hdev)
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 35f5585188de..d30163eb1643 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -59,6 +59,17 @@ struct hci_pinfo {
 	char              comm[TASK_COMM_LEN];
 };
 
+static struct hci_dev *hci_hdev_from_sock(struct sock *sk)
+{
+	struct hci_dev *hdev = hci_pi(sk)->hdev;
+
+	if (!hdev)
+		return ERR_PTR(-EBADFD);
+	if (hci_dev_test_flag(hdev, HCI_UNREGISTER))
+		return ERR_PTR(-EPIPE);
+	return hdev;
+}
+
 void hci_sock_set_flag(struct sock *sk, int nr)
 {
 	set_bit(nr, &hci_pi(sk)->flags);
@@ -747,19 +758,13 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event)
 	if (event == HCI_DEV_UNREG) {
 		struct sock *sk;
 
-		/* Detach sockets from device */
+		/* Wake up sockets using this dead device */
 		read_lock(&hci_sk_list.lock);
 		sk_for_each(sk, &hci_sk_list.head) {
-			lock_sock(sk);
 			if (hci_pi(sk)->hdev == hdev) {
-				hci_pi(sk)->hdev = NULL;
 				sk->sk_err = EPIPE;
-				sk->sk_state = BT_OPEN;
 				sk->sk_state_change(sk);
-
-				hci_dev_put(hdev);
 			}
-			release_sock(sk);
 		}
 		read_unlock(&hci_sk_list.lock);
 	}
@@ -918,10 +923,10 @@ static int hci_sock_blacklist_del(struct hci_dev *hdev, void __user *arg)
 static int hci_sock_bound_ioctl(struct sock *sk, unsigned int cmd,
 				unsigned long arg)
 {
-	struct hci_dev *hdev = hci_pi(sk)->hdev;
+	struct hci_dev *hdev = hci_hdev_from_sock(sk);
 
-	if (!hdev)
-		return -EBADFD;
+	if (IS_ERR(hdev))
+		return PTR_ERR(hdev);
 
 	if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL))
 		return -EBUSY;
@@ -1075,6 +1080,18 @@ static int hci_sock_bind(struct socket *sock, struct sockaddr *addr,
 
 	lock_sock(sk);
 
+	/* Allow detaching from dead device and attaching to alive device, if
+	 * the caller wants to re-bind (instead of close) this socket in
+	 * response to hci_sock_dev_event(HCI_DEV_UNREG) notification.
+	 */
+	hdev = hci_pi(sk)->hdev;
+	if (hdev && hci_dev_test_flag(hdev, HCI_UNREGISTER)) {
+		hci_pi(sk)->hdev = NULL;
+		sk->sk_state = BT_OPEN;
+		hci_dev_put(hdev);
+	}
+	hdev = NULL;
+
 	if (sk->sk_state == BT_BOUND) {
 		err = -EALREADY;
 		goto done;
@@ -1351,9 +1368,9 @@ static int hci_sock_getname(struct socket *sock, struct sockaddr *addr,
 
 	lock_sock(sk);
 
-	hdev = hci_pi(sk)->hdev;
-	if (!hdev) {
-		err = -EBADFD;
+	hdev = hci_hdev_from_sock(sk);
+	if (IS_ERR(hdev)) {
+		err = PTR_ERR(hdev);
 		goto done;
 	}
 
@@ -1713,9 +1730,9 @@ static int hci_sock_sendmsg(struct socket *sock, struct msghdr *msg,
 		goto done;
 	}
 
-	hdev = hci_pi(sk)->hdev;
-	if (!hdev) {
-		err = -EBADFD;
+	hdev = hci_hdev_from_sock(sk);
+	if (IS_ERR(hdev)) {
+		err = PTR_ERR(hdev);
 		goto done;
 	}
 
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index ca7a35ebaefb..cb7d06bb0243 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -82,6 +82,9 @@ void hci_conn_del_sysfs(struct hci_conn *conn)
 static void bt_host_release(struct device *dev)
 {
 	struct hci_dev *hdev = to_hci_dev(dev);
+
+	if (hci_dev_test_flag(hdev, HCI_UNREGISTER))
+		hci_cleanup_dev(hdev);
 	kfree(hdev);
 	module_put(THIS_MODULE);
 }
-- 
2.30.2

[PATCH 4.9 11/30] USB: usbtmc: Fix RCU stall warning

[Greg Kroah-Hartman]

From: Qiang.zhang <qiang.zhang@windriver.com>

commit 30fad76ce4e98263edfa8f885c81d5426c1bf169 upstream.

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:    1-...!: (2 ticks this GP) idle=d92/1/0x4000000000000000
        softirq=25390/25392 fqs=3
        (t=12164 jiffies g=31645 q=43226)
rcu: rcu_preempt kthread starved for 12162 jiffies! g31645 f0x0
     RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu:    Unless rcu_preempt kthread gets sufficient CPU time,
        OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt     state:R  running task
...........
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: unknown status received: -71
usbtmc 3-1:0.0: usb_submit_urb failed: -19

The function usbtmc_interrupt() resubmits urbs when the error status
of an urb is -EPROTO. In systems using the dummy_hcd usb controller
this can result in endless interrupt loops when the usbtmc device is
disconnected from the host system.

Since host controller drivers already try to recover from transmission
errors, there is no need to resubmit the urb or try other solutions
to repair the error situation.

In case of errors the INT pipe just stops to wait for further packets.

Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation")
Cc: stable@vger.kernel.org
Reported-by: syzbot+e2eae5639e7203360018@syzkaller.appspotmail.com
Signed-off-by: Qiang.zhang <qiang.zhang@windriver.com>
Acked-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Link: https://lore.kernel.org/r/20210723004334.458930-1-qiang.zhang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/usbtmc.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -1342,16 +1342,10 @@ static void usbtmc_interrupt(struct urb
 	case -EOVERFLOW:
 		dev_err(dev, "overflow with length %d, actual length is %d\n",
 			data->iin_wMaxPacketSize, urb->actual_length);
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-	case -EILSEQ:
-	case -ETIME:
+	default:
 		/* urb terminated, clean up */
 		dev_dbg(dev, "urb terminated, status: %d\n", status);
 		return;
-	default:
-		dev_err(dev, "unknown status received: %d\n", status);
 	}
 exit:
 	rv = usb_submit_urb(urb, GFP_ATOMIC);

[PATCH 4.9 12/30] USB: serial: option: add Telit FD980 composition 0x1056

[Greg Kroah-Hartman]

From: Daniele Palmas <dnlplm@gmail.com>

commit 5648c073c33d33a0a19d0cb1194a4eb88efe2b71 upstream.

Add the following Telit FD980 composition 0x1056:

Cfg #1: mass storage
Cfg #2: rndis, tty, adb, tty, tty, tty, tty

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20210803194711.3036-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1185,6 +1185,8 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1055, 0xff),	/* Telit FN980 (PCIe) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff),	/* Telit FD980 */
+	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

[PATCH 4.9 13/30] USB: serial: ch341: fix character loss at high transfer rates

[Greg Kroah-Hartman]

From: Willy Tarreau <w@1wt.eu>

commit 3c18e9baee0ef97510dcda78c82285f52626764b upstream.

The chip supports high transfer rates, but with the small default buffers
(64 bytes read), some entire blocks are regularly lost. This typically
happens at 1.5 Mbps (which is the default speed on Rockchip devices) when
used as a console to access U-Boot where the output of the "help" command
misses many lines and where "printenv" mangles the environment.

The FTDI driver doesn't suffer at all from this. One difference is that
it uses 512 bytes rx buffers and 256 bytes tx buffers. Adopting these
values completely resolved the issue, even the output of "dmesg" is
reliable. I preferred to leave the Tx value unchanged as it is not
involved in this issue, while a change could increase the risk of
triggering the same issue with other devices having too small buffers.

I verified that it backports well (and works) at least to 5.4. It's of
low importance enough to be dropped where it doesn't trivially apply
anymore.

Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210724152739.18726-1-w@1wt.eu
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ch341.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -585,6 +585,7 @@ static struct usb_serial_driver ch341_de
 		.owner	= THIS_MODULE,
 		.name	= "ch341-uart",
 	},
+	.bulk_in_size      = 512,
 	.id_table          = id_table,
 	.num_ports         = 1,
 	.open              = ch341_open,

[PATCH 4.9 14/30] USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2

[Greg Kroah-Hartman]

From: David Bauer <mail@david-bauer.net>

commit 8da0e55c7988ef9f08a708c38e5c75ecd8862cf8 upstream.

The Auto-M3 OP-COM v2 is a OBD diagnostic device using a FTD232 for the
USB connection.

Signed-off-by: David Bauer <mail@david-bauer.net>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    3 +++
 2 files changed, 4 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -214,6 +214,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
 	{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_AUTO_M3_OP_COM_V2_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -158,6 +158,9 @@
 /* Vardaan Enterprises Serial Interface VEUSB422R3 */
 #define FTDI_VARDAAN_PID	0xF070
 
+/* Auto-M3 Ltd. - OP-COM USB V2 - OBD interface Adapter */
+#define FTDI_AUTO_M3_OP_COM_V2_PID	0x4f50
+
 /*
  * Xsens Technologies BV products (http://www.xsens.com).
  */

[PATCH 4.9 15/30] usb: otg-fsm: Fix hrtimer list corruption

[Greg Kroah-Hartman]

From: Dmitry Osipenko <digetx@gmail.com>

commit bf88fef0b6f1488abeca594d377991171c00e52a upstream.

The HNP work can be re-scheduled while it's still in-fly. This results in
re-initialization of the busy work, resetting the hrtimer's list node of
the work and crashing kernel with null dereference within kernel/timer
once work's timer is expired. It's very easy to trigger this problem by
re-plugging USB cable quickly. Initialize HNP work only once to fix this
trouble.

 Unable to handle kernel NULL pointer dereference at virtual address 00000126)
 ...
 PC is at __run_timers.part.0+0x150/0x228
 LR is at __next_timer_interrupt+0x51/0x9c
 ...
 (__run_timers.part.0) from [<c0187a2b>] (run_timer_softirq+0x2f/0x50)
 (run_timer_softirq) from [<c01013ad>] (__do_softirq+0xd5/0x2f0)
 (__do_softirq) from [<c012589b>] (irq_exit+0xab/0xb8)
 (irq_exit) from [<c0170341>] (handle_domain_irq+0x45/0x60)
 (handle_domain_irq) from [<c04c4a43>] (gic_handle_irq+0x6b/0x7c)
 (gic_handle_irq) from [<c0100b65>] (__irq_svc+0x65/0xac)

Cc: stable@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210717182134.30262-6-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/common/usb-otg-fsm.c |    6 +++++-
 include/linux/usb/otg-fsm.h      |    1 +
 2 files changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/usb/common/usb-otg-fsm.c
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -199,7 +199,11 @@ static void otg_start_hnp_polling(struct
 	if (!fsm->host_req_flag)
 		return;
 
-	INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+	if (!fsm->hnp_work_inited) {
+		INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+		fsm->hnp_work_inited = true;
+	}
+
 	schedule_delayed_work(&fsm->hnp_polling_work,
 					msecs_to_jiffies(T_HOST_REQ_POLL));
 }
--- a/include/linux/usb/otg-fsm.h
+++ b/include/linux/usb/otg-fsm.h
@@ -210,6 +210,7 @@ struct otg_fsm {
 	struct mutex lock;
 	u8 *host_req_flag;
 	struct delayed_work hnp_polling_work;
+	bool hnp_work_inited;
 	bool state_changed;
 };
 

[PATCH 4.9 16/30] scripts/tracing: fix the bug that cant parse raw_trace_func

[Greg Kroah-Hartman]

From: Hui Su <suhui@zeku.com>

commit 1c0cec64a7cc545eb49f374a43e9f7190a14defa upstream.

Since commit 77271ce4b2c0 ("tracing: Add irq, preempt-count and need resched info
to default trace output"), the default trace output format has been changed to:
          <idle>-0       [009] d.h. 22420.068695: _raw_spin_lock_irqsave <-hrtimer_interrupt
          <idle>-0       [000] ..s. 22420.068695: _nohz_idle_balance <-run_rebalance_domains
          <idle>-0       [011] d.h. 22420.068695: account_process_tick <-update_process_times

origin trace output format:(before v3.2.0)
     # tracer: nop
     #
     #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
     #              | |       |          |         |
          migration/0-6     [000]    50.025810: rcu_note_context_switch <-__schedule
          migration/0-6     [000]    50.025812: trace_rcu_utilization <-rcu_note_context_switch
          migration/0-6     [000]    50.025813: rcu_sched_qs <-rcu_note_context_switch
          migration/0-6     [000]    50.025815: rcu_preempt_qs <-rcu_note_context_switch
          migration/0-6     [000]    50.025817: trace_rcu_utilization <-rcu_note_context_switch
          migration/0-6     [000]    50.025818: debug_lockdep_rcu_enabled <-__schedule
          migration/0-6     [000]    50.025820: debug_lockdep_rcu_enabled <-__schedule

The draw_functrace.py(introduced in v2.6.28) can't parse the new version format trace_func,
So we need modify draw_functrace.py to adapt the new version trace output format.

Link: https://lkml.kernel.org/r/20210611022107.608787-1-suhui@zeku.com

Cc: stable@vger.kernel.org
Fixes: 77271ce4b2c0 tracing: Add irq, preempt-count and need resched info to default trace output
Signed-off-by: Hui Su <suhui@zeku.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/tracing/draw_functrace.py |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -17,7 +17,7 @@ Usage:
 	$ cat /sys/kernel/debug/tracing/trace_pipe > ~/raw_trace_func
 	Wait some times but not too much, the script is a bit slow.
 	Break the pipe (Ctrl + Z)
-	$ scripts/draw_functrace.py < raw_trace_func > draw_functrace
+	$ scripts/tracing/draw_functrace.py < ~/raw_trace_func > draw_functrace
 	Then you have your drawn trace in draw_functrace
 """
 
@@ -103,10 +103,10 @@ def parseLine(line):
 	line = line.strip()
 	if line.startswith("#"):
 		raise CommentLineException
-	m = re.match("[^]]+?\\] +([0-9.]+): (\\w+) <-(\\w+)", line)
+	m = re.match("[^]]+?\\] +([a-z.]+) +([0-9.]+): (\\w+) <-(\\w+)", line)
 	if m is None:
 		raise BrokenLineException
-	return (m.group(1), m.group(2), m.group(3))
+	return (m.group(2), m.group(3), m.group(4))
 
 
 def main():

[PATCH 4.9 17/30] media: rtl28xxu: fix zero-length control request

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 76f22c93b209c811bd489950f17f8839adb31901 upstream.

The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.

The driver uses a zero-length i2c-read request for type detection so
update the control-request code to use usb_sndctrlpipe() in this case.

Note that actually trying to read the i2c register in question does not
work as the register might not exist (e.g. depending on the demodulator)
as reported by Eero Lehtinen <debiangamer2@gmail.com>.

Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com
Reported-by: Eero Lehtinen <debiangamer2@gmail.com>
Tested-by: Eero Lehtinen <debiangamer2@gmail.com>
Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type")
Cc: stable@vger.kernel.org      # 4.0
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -50,7 +50,16 @@ static int rtl28xxu_ctrl_msg(struct dvb_
 	} else {
 		/* read */
 		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
-		pipe = usb_rcvctrlpipe(d->udev, 0);
+
+		/*
+		 * Zero-length transfers must use usb_sndctrlpipe() and
+		 * rtl28xxu_identify_state() uses a zero-length i2c read
+		 * command to determine the chip type.
+		 */
+		if (req->size)
+			pipe = usb_rcvctrlpipe(d->udev, 0);
+		else
+			pipe = usb_sndctrlpipe(d->udev, 0);
 	}
 
 	ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value,

[PATCH 4.9 18/30] pipe: increase minimum default pipe size to 2 pages

[Greg Kroah-Hartman]

From: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>

commit 46c4c9d1beb7f5b4cec4dd90e7728720583ee348 upstream.

This program always prints 4096 and hangs before the patch, and always
prints 8192 and exits successfully after:

  int main()
  {
      int pipefd[2];
      for (int i = 0; i < 1025; i++)
          if (pipe(pipefd) == -1)
              return 1;
      size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ);
      printf("%zd\n", bufsz);
      char *buf = calloc(bufsz, 1);
      write(pipefd[1], buf, bufsz);
      read(pipefd[0], buf, bufsz-1);
      write(pipefd[1], buf, 1);
  }

Note that you may need to increase your RLIMIT_NOFILE before running the
program.

Fixes: 759c01142a ("pipe: limit the per-user amount of pages allocated in pipes")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/
Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/pipe.c |   19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -29,6 +29,21 @@
 #include "internal.h"
 
 /*
+ * New pipe buffers will be restricted to this size while the user is exceeding
+ * their pipe buffer quota. The general pipe use case needs at least two
+ * buffers: one for data yet to be read, and one for new data. If this is less
+ * than two, then a write to a non-empty pipe may block even if the pipe is not
+ * full. This can occur with GNU make jobserver or similar uses of pipes as
+ * semaphores: multiple processes may be waiting to write tokens back to the
+ * pipe before reading tokens: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/.
+ *
+ * Users can reduce their pipe buffers with F_SETPIPE_SZ below this at their
+ * own risk, namely: pipe writes to non-full pipes may block until the pipe is
+ * emptied.
+ */
+#define PIPE_MIN_DEF_BUFFERS 2
+
+/*
  * The max size that a non-root user is allowed to grow the pipe. Can
  * be set by root in /proc/sys/fs/pipe-max-size
  */
@@ -653,8 +668,8 @@ struct pipe_inode_info *alloc_pipe_info(
 	user_bufs = account_pipe_buffers(user, 0, pipe_bufs);
 
 	if (too_many_pipe_buffers_soft(user_bufs) && is_unprivileged_user()) {
-		user_bufs = account_pipe_buffers(user, pipe_bufs, 1);
-		pipe_bufs = 1;
+		user_bufs = account_pipe_buffers(user, pipe_bufs, PIPE_MIN_DEF_BUFFERS);
+		pipe_bufs = PIPE_MIN_DEF_BUFFERS;
 	}
 
 	if (too_many_pipe_buffers_hard(user_bufs) && is_unprivileged_user())

[PATCH 4.9 19/30] serial: 8250: Mask out floating 16/32-bit bus bits

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit e5227c51090e165db4b48dcaa300605bfced7014 upstream.

Make sure only actual 8 bits of the IIR register are used in determining
the port type in `autoconfig'.

The `serial_in' port accessor returns the `unsigned int' type, meaning
that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types
more than 8 bits of data are returned, of which the high order bits will
often come from bus lines that are left floating in the data phase.  For
example with the MIPS Malta board's CBUS UART, where the registers are
aligned on 8-byte boundaries and which uses 32-bit accesses, data as
follows is returned:

YAMON> dump -32 0xbf000900 0x40

BF000900: 1F000942 1F000942 1F000900 1F000900  ...B...B........
BF000910: 1F000901 1F000901 1F000900 1F000900  ................
BF000920: 1F000900 1F000900 1F000960 1F000960  ...........`...`
BF000930: 1F000900 1F000900 1F0009FF 1F0009FF  ................

YAMON>

Evidently high-order 24 bits return values previously driven in the
address phase (the 3 highest order address bits used with the command
above are masked out in the simple virtual address mapping used here and
come out at zeros on the external bus), a common scenario with bus lines
left floating, due to bus capacitance.

Consequently when the value of IIR, mapped at 0x1f000910, is retrieved
in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted
by 6 and then assigned to 8-bit `scratch' variable, the value calculated
is 0x27, not one of 0, 1, 2, 3 expected in port type determination.

Fix the issue then, by assigning the value returned from `serial_in' to
`scratch' first, which masks out 24 high-order bits retrieved, and only
then right-shift the resulting 8-bit data quantity, producing the value
of 3 in this case, as expected.  Fix the same issue in `serial_dl_read'.

The problem first appeared with Linux 2.6.9-rc3 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in
`serial_in' was updated with this case:

+	case UPIO_MEM32:
+		return readl(up->port.membase + offset);
+

which made it produce results outside the unsigned 8-bit range for the
first time, though obviously it is system dependent what actual values
appear in the high order bits retrieved and it may well have been zeros
in the relevant positions with the system the change originally was
intended for.  It is at that point that code in `autoconf' should have
been updated accordingly, but clearly it was overlooked.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260516220.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_port.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -277,7 +277,11 @@ static const struct serial8250_config ua
 /* Uart divisor latch read */
 static int default_serial_dl_read(struct uart_8250_port *up)
 {
-	return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
+	/* Assign these in pieces to truncate any bits above 7.  */
+	unsigned char dll = serial_in(up, UART_DLL);
+	unsigned char dlm = serial_in(up, UART_DLM);
+
+	return dll | dlm << 8;
 }
 
 /* Uart divisor latch write */
@@ -1262,9 +1266,11 @@ static void autoconfig(struct uart_8250_
 	serial_out(up, UART_LCR, 0);
 
 	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-	scratch = serial_in(up, UART_IIR) >> 6;
 
-	switch (scratch) {
+	/* Assign this as it is to truncate any bits above 7.  */
+	scratch = serial_in(up, UART_IIR);
+
+	switch (scratch >> 6) {
 	case 0:
 		autoconfig_8250(up);
 		break;

[PATCH 4.9 20/30] MIPS: Malta: Do not byte-swap accesses to the CBUS UART

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit 9a936d6c3d3d6c33ecbadf72dccdb567b5cd3c72 upstream.

Correct big-endian accesses to the CBUS UART, a Malta on-board discrete
TI16C550C part wired directly to the system controller's device bus, and
do not use byte swapping with the 32-bit accesses to the device.

The CBUS is used for devices such as the boot flash memory needed early
on in system bootstrap even before PCI has been initialised.  Therefore
it uses the system controller's device bus, which follows the endianness
set with the CPU, which means no byte-swapping is ever required for data
accesses to CBUS, unlike with PCI.

The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and
`writel' MMIO accessors, which on the MIPS platform imply byte-swapping
with PCI systems.  Consequently the wrong byte lane is accessed with the
big-endian configuration and the UART is not correctly accessed.

As it happens the UPIO_MEM32BE access method makes use of the `ioread32'
and `iowrite32' MMIO accessors, which still use `readl' and `writel'
respectively, however they byte-swap data passed, effectively cancelling
swapping done with the accessors themselves and making it suitable for
the CBUS UART.

Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then,
based on the endianness selected.  With this change in place the device
is correctly recognised with big-endian Malta at boot, along with the
Super I/O devices behind PCI:

Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
printk: console [ttyS0] disabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
printk: console [ttyS0] enabled
printk: bootconsole [uart8250] disabled
serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A

Fixes: e7c4782f92fc ("[MIPS] Put an end to <asm/serial.h>'s long and annyoing existence")
Cc: stable@vger.kernel.org # v2.6.23+
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260524430.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/mti-malta/malta-platform.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -48,7 +48,8 @@ static struct plat_serial8250_port uart8
 		.mapbase	= 0x1f000900,	/* The CBUS UART */
 		.irq		= MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
 		.uartclk	= 3686400,	/* Twice the usual clk! */
-		.iotype		= UPIO_MEM32,
+		.iotype		= IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) ?
+				  UPIO_MEM32BE : UPIO_MEM32,
 		.flags		= CBUS_UART_FLAGS,
 		.regshift	= 3,
 	},

[PATCH 4.9 21/30] pcmcia: i82092: fix a null pointer dereference bug

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

commit e39cdacf2f664b09029e7c1eb354c91a20c367af upstream.

During the driver loading process, the 'dev' field was not assigned, but
the 'dev' field was referenced in the subsequent 'i82092aa_set_mem_map'
function.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
CC: <stable@vger.kernel.org>
[linux@dominikbrodowski.net: shorten commit message, add Cc to stable]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pcmcia/i82092.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -105,6 +105,7 @@ static int i82092aa_pci_probe(struct pci
 	for (i = 0;i<socket_count;i++) {
 		sockets[i].card_state = 1; /* 1 = present but empty */
 		sockets[i].io_base = pci_resource_start(dev, 0);
+		sockets[i].dev = dev;
 		sockets[i].socket.features |= SS_CAP_PCCARD;
 		sockets[i].socket.map_size = 0x1000;
 		sockets[i].socket.irq_mask = 0;

[PATCH 4.9 22/30] perf/x86/amd: Dont touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest

[Greg Kroah-Hartman]

From: Like Xu <likexu@tencent.com>

commit df51fe7ea1c1c2c3bfdb81279712fdd2e4ea6c27 upstream.

If we use "perf record" in an AMD Milan guest, dmesg reports a #GP
warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx:

  [] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000110076) at rIP: 0xffffffff8106ddb4 (native_write_msr+0x4/0x20)
  [] Call Trace:
  []  amd_pmu_disable_event+0x22/0x90
  []  x86_pmu_stop+0x4c/0xa0
  []  x86_pmu_del+0x3a/0x140

The AMD64_EVENTSEL_HOSTONLY bit is defined and used on the host,
while the guest perf driver should avoid such use.

Fixes: 1018faa6cf23 ("perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled")
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Link: https://lkml.kernel.org/r/20210802070850.35295-1-likexu@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/perf_event.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -771,9 +771,10 @@ void x86_pmu_stop(struct perf_event *eve
 
 static inline void x86_pmu_disable_event(struct perf_event *event)
 {
+	u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask);
 	struct hw_perf_event *hwc = &event->hw;
 
-	wrmsrl(hwc->config_base, hwc->config);
+	wrmsrl(hwc->config_base, hwc->config & ~disable_mask);
 }
 
 void x86_pmu_enable_event(struct perf_event *event);

[PATCH 4.9 23/30] reiserfs: add check for root_inode in reiserfs_fill_super

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 2acf15b94d5b8ea8392c4b6753a6ffac3135cd78 ]

Our syzcaller report a NULL pointer dereference:

BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 116e95067 P4D 116e95067 PUD 1080b5067 PMD 0
Oops: 0010 [#1] SMP KASAN
CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-20210629-dirty #67
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffff888114e779b8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff110229cef39 RCX: ffffffffaa67e1aa
RDX: 0000000000000000 RSI: ffff88810a58ee00 RDI: ffff8881233180b0
RBP: ffffffffac38e9c0 R08: ffffffffaa67e17e R09: 0000000000000001
R10: ffffffffb91c5557 R11: fffffbfff7238aaa R12: ffff88810a58ee00
R13: ffff888114e77aa0 R14: 0000000000000000 R15: ffff8881233180b0
FS:  00007f946163c480(0000) GS:ffff88839f1c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 00000001099c1000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __lookup_slow+0x116/0x2d0
 ? page_put_link+0x120/0x120
 ? __d_lookup+0xfc/0x320
 ? d_lookup+0x49/0x90
 lookup_one_len+0x13c/0x170
 ? __lookup_slow+0x2d0/0x2d0
 ? reiserfs_schedule_old_flush+0x31/0x130
 reiserfs_lookup_privroot+0x64/0x150
 reiserfs_fill_super+0x158c/0x1b90
 ? finish_unfinished+0xb10/0xb10
 ? bprintf+0xe0/0xe0
 ? __mutex_lock_slowpath+0x30/0x30
 ? __kasan_check_write+0x20/0x30
 ? up_write+0x51/0xb0
 ? set_blocksize+0x9f/0x1f0
 mount_bdev+0x27c/0x2d0
 ? finish_unfinished+0xb10/0xb10
 ? reiserfs_kill_sb+0x120/0x120
 get_super_block+0x19/0x30
 legacy_get_tree+0x76/0xf0
 vfs_get_tree+0x49/0x160
 ? capable+0x1d/0x30
 path_mount+0xacc/0x1380
 ? putname+0x97/0xd0
 ? finish_automount+0x450/0x450
 ? kmem_cache_free+0xf8/0x5a0
 ? putname+0x97/0xd0
 do_mount+0xe2/0x110
 ? path_mount+0x1380/0x1380
 ? copy_mount_options+0x69/0x140
 __x64_sys_mount+0xf0/0x190
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

This is because 'root_inode' is initialized with wrong mode, and
it's i_op is set to 'reiserfs_special_inode_operations'. Thus add
check for 'root_inode' to fix the problem.

Link: https://lore.kernel.org/r/20210702040743.1918552-1-yukuai3@huawei.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/reiserfs/super.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index c533d8715a6c..0d324c07762a 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -2059,6 +2059,14 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
 		unlock_new_inode(root_inode);
 	}
 
+	if (!S_ISDIR(root_inode->i_mode) || !inode_get_bytes(root_inode) ||
+	    !root_inode->i_size) {
+		SWARN(silent, s, "", "corrupt root inode, run fsck");
+		iput(root_inode);
+		errval = -EUCLEAN;
+		goto error;
+	}
+
 	s->s_root = d_make_root(root_inode);
 	if (!s->s_root)
 		goto error;
-- 
2.30.2

[PATCH 4.9 24/30] reiserfs: check directory items on read from disk

[Greg Kroah-Hartman]

From: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>

[ Upstream commit 13d257503c0930010ef9eed78b689cec417ab741 ]

While verifying the leaf item that we read from the disk, reiserfs
doesn't check the directory items, this could cause a crash when we
read a directory item from the disk that has an invalid deh_location.

This patch adds a check to the directory items read from the disk that
does a bounds check on deh_location for the directory entries. Any
directory entry header with a directory entry offset greater than the
item length is considered invalid.

Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com
Reported-by: syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com
Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/reiserfs/stree.c | 31 ++++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c
index 25b2aed9af0b..f2f7055303ca 100644
--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -386,6 +386,24 @@ void pathrelse(struct treepath *search_path)
 	search_path->path_length = ILLEGAL_PATH_ELEMENT_OFFSET;
 }
 
+static int has_valid_deh_location(struct buffer_head *bh, struct item_head *ih)
+{
+	struct reiserfs_de_head *deh;
+	int i;
+
+	deh = B_I_DEH(bh, ih);
+	for (i = 0; i < ih_entry_count(ih); i++) {
+		if (deh_location(&deh[i]) > ih_item_len(ih)) {
+			reiserfs_warning(NULL, "reiserfs-5094",
+					 "directory entry location seems wrong %h",
+					 &deh[i]);
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
 static int is_leaf(char *buf, int blocksize, struct buffer_head *bh)
 {
 	struct block_head *blkh;
@@ -453,11 +471,14 @@ static int is_leaf(char *buf, int blocksize, struct buffer_head *bh)
 					 "(second one): %h", ih);
 			return 0;
 		}
-		if (is_direntry_le_ih(ih) && (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE))) {
-			reiserfs_warning(NULL, "reiserfs-5093",
-					 "item entry count seems wrong %h",
-					 ih);
-			return 0;
+		if (is_direntry_le_ih(ih)) {
+			if (ih_item_len(ih) < (ih_entry_count(ih) * IH_SIZE)) {
+				reiserfs_warning(NULL, "reiserfs-5093",
+						 "item entry count seems wrong %h",
+						 ih);
+				return 0;
+			}
+			return has_valid_deh_location(bh, ih);
 		}
 		prev_location = ih_location(ih);
 	}
-- 
2.30.2

[PATCH 4.9 25/30] alpha: Send stop IPI to send to online CPUs

[Greg Kroah-Hartman]

From: Prarit Bhargava <prarit@redhat.com>

[ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ]

This issue was noticed while debugging a shutdown issue where some
secondary CPUs are not being shutdown correctly.  A fix for that [1] requires
that secondary cpus be offlined using the cpu_online_mask so that the
stop operation is a no-op if CPU HOTPLUG is disabled.  I, like the author in
[1] looked at the architectures and found that alpha is one of two
architectures that executes smp_send_stop() on all possible CPUs.

On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs
to send them to online CPUs.

Send the stop IPI to only the online CPUs.

[1] https://lkml.org/lkml/2020/1/10/250

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/kernel/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 46bf263c3153..d2477a502ce7 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -584,7 +584,7 @@ void
 smp_send_stop(void)
 {
 	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
+	cpumask_copy(&to_whom, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &to_whom);
 #ifdef DEBUG_IPI_MSG
 	if (hard_smp_processor_id() != boot_cpu_id)
-- 
2.30.2

[PATCH 4.9 26/30] net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset

[Greg Kroah-Hartman]

From: Letu Ren <fantasquex@gmail.com>

[ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ]

When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver
has already acquired the spin lock, so the driver should not call 'ssleep'
in atomic context.

This bug can be fixed by using 'mdelay' instead of 'ssleep'.

Reported-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qla3xxx.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -155,7 +155,7 @@ static int ql_wait_for_drvr_lock(struct
 				      "driver lock acquired\n");
 			return 1;
 		}
-		ssleep(1);
+		mdelay(1000);
 	} while (++i < 10);
 
 	netdev_err(qdev->ndev, "Timed out waiting for driver lock...\n");
@@ -3287,7 +3287,7 @@ static int ql_adapter_reset(struct ql3_a
 		if ((value & ISP_CONTROL_SR) == 0)
 			break;
 
-		ssleep(1);
+		mdelay(1000);
 	} while ((--max_wait_time));
 
 	/*
@@ -3323,7 +3323,7 @@ static int ql_adapter_reset(struct ql3_a
 						   ispControlStatus);
 			if ((value & ISP_CONTROL_FSR) == 0)
 				break;
-			ssleep(1);
+			mdelay(1000);
 		} while ((--max_wait_time));
 	}
 	if (max_wait_time == 0)

[PATCH 4.9 27/30] USB:ehci:fix Kunpeng920 ehci hardware problem

[Greg Kroah-Hartman]

From: Longfang Liu <liulongfang@huawei.com>

commit 26b75952ca0b8b4b3050adb9582c8e2f44d49687 upstream.

Kunpeng920's EHCI controller does not have SBRN register.
Reading the SBRN register when the controller driver is
initialized will get 0.

When rebooting the EHCI driver, ehci_shutdown() will be called.
if the sbrn flag is 0, ehci_shutdown() will return directly.
The sbrn flag being 0 will cause the EHCI interrupt signal to
not be turned off after reboot. this interrupt that is not closed
will cause an exception to the device sharing the interrupt.

Therefore, the EHCI controller of Kunpeng920 needs to skip
the read operation of the SBRN register.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/1617958081-17999-1-git-send-email-liulongfang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/ehci-pci.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -312,6 +312,9 @@ static int ehci_pci_setup(struct usb_hcd
 	if (pdev->vendor == PCI_VENDOR_ID_STMICRO
 	    && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
 		;	/* ConneXT has no sbrn register */
+	else if (pdev->vendor == PCI_VENDOR_ID_HUAWEI
+			 && pdev->device == 0xa239)
+		;	/* HUAWEI Kunpeng920 USB EHCI has no sbrn register */
 	else
 		pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
 

[PATCH 4.9 28/30] ppp: Fix generating ppp unit id when ifname is not specified

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

commit 3125f26c514826077f2a4490b75e9b1c7a644c42 upstream.

When registering new ppp interface via PPPIOCNEWUNIT ioctl then kernel has
to choose interface name as this ioctl API does not support specifying it.

Kernel in this case register new interface with name "ppp<id>" where <id>
is the ppp unit id, which can be obtained via PPPIOCGUNIT ioctl. This
applies also in the case when registering new ppp interface via rtnl
without supplying IFLA_IFNAME.

PPPIOCNEWUNIT ioctl allows to specify own ppp unit id which will kernel
assign to ppp interface, in case this ppp id is not already used by other
ppp interface.

In case user does not specify ppp unit id then kernel choose the first free
ppp unit id. This applies also for case when creating ppp interface via
rtnl method as it does not provide a way for specifying own ppp unit id.

If some network interface (does not have to be ppp) has name "ppp<id>"
with this first free ppp id then PPPIOCNEWUNIT ioctl or rtnl call fails.

And registering new ppp interface is not possible anymore, until interface
which holds conflicting name is renamed. Or when using rtnl method with
custom interface name in IFLA_IFNAME.

As list of allocated / used ppp unit ids is not possible to retrieve from
kernel to userspace, userspace has no idea what happens nor which interface
is doing this conflict.

So change the algorithm how ppp unit id is generated. And choose the first
number which is not neither used as ppp unit id nor in some network
interface with pattern "ppp<id>".

This issue can be simply reproduced by following pppd call when there is no
ppp interface registered and also no interface with name pattern "ppp<id>":

    pppd ifname ppp1 +ipv6 noip noauth nolock local nodetach pty "pppd +ipv6 noip noauth nolock local nodetach notty"

Or by creating the one ppp interface (which gets assigned ppp unit id 0),
renaming it to "ppp1" and then trying to create a new ppp interface (which
will always fails as next free ppp unit id is 1, but network interface with
name "ppp1" exists).

This patch fixes above described issue by generating new and new ppp unit
id until some non-conflicting id with network interfaces is generated.

Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ppp/ppp_generic.c |   19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -285,7 +285,7 @@ static struct channel *ppp_find_channel(
 static int ppp_connect_channel(struct channel *pch, int unit);
 static int ppp_disconnect_channel(struct channel *pch);
 static void ppp_destroy_channel(struct channel *pch);
-static int unit_get(struct idr *p, void *ptr);
+static int unit_get(struct idr *p, void *ptr, int min);
 static int unit_set(struct idr *p, void *ptr, int n);
 static void unit_put(struct idr *p, int n);
 static void *unit_find(struct idr *p, int n);
@@ -976,9 +976,20 @@ static int ppp_unit_register(struct ppp
 	mutex_lock(&pn->all_ppp_mutex);
 
 	if (unit < 0) {
-		ret = unit_get(&pn->units_idr, ppp);
+		ret = unit_get(&pn->units_idr, ppp, 0);
 		if (ret < 0)
 			goto err;
+		if (!ifname_is_set) {
+			while (1) {
+				snprintf(ppp->dev->name, IFNAMSIZ, "ppp%i", ret);
+				if (!__dev_get_by_name(ppp->ppp_net, ppp->dev->name))
+					break;
+				unit_put(&pn->units_idr, ret);
+				ret = unit_get(&pn->units_idr, ppp, ret + 1);
+				if (ret < 0)
+					goto err;
+			}
+		}
 	} else {
 		/* Caller asked for a specific unit number. Fail with -EEXIST
 		 * if unavailable. For backward compatibility, return -EEXIST
@@ -3265,9 +3276,9 @@ static int unit_set(struct idr *p, void
 }
 
 /* get new free unit number and associate pointer with it */
-static int unit_get(struct idr *p, void *ptr)
+static int unit_get(struct idr *p, void *ptr, int min)
 {
-	return idr_alloc(p, ptr, 0, 0, GFP_KERNEL);
+	return idr_alloc(p, ptr, min, 0, GFP_KERNEL);
 }
 
 /* put unit number back to a pool */

[PATCH 4.9 29/30] net: xilinx_emaclite: Do not print real IOMEM pointer

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

commit d0d62baa7f505bd4c59cd169692ff07ec49dde37 upstream.

Printing kernel pointers is discouraged because they might leak kernel
memory layout.  This fixes smatch warning:

drivers/net/ethernet/xilinx/xilinx_emaclite.c:1191 xemaclite_of_probe() warn:
 argument 4 to %08lX specifier is cast from pointer

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -1179,9 +1179,8 @@ static int xemaclite_of_probe(struct pla
 	}
 
 	dev_info(dev,
-		 "Xilinx EmacLite at 0x%08X mapped to 0x%08X, irq=%d\n",
-		 (unsigned int __force)ndev->mem_start,
-		 (unsigned int __force)lp->base_addr, ndev->irq);
+		 "Xilinx EmacLite at 0x%08X mapped to 0x%p, irq=%d\n",
+		 (unsigned int __force)ndev->mem_start, lp->base_addr, ndev->irq);
 	return 0;
 
 error:

[PATCH 4.9 30/30] ovl: prevent private clone if bind mount is not allowed

[Greg Kroah-Hartman]

From: Miklos Szeredi <mszeredi@redhat.com>

commit 427215d85e8d1476da1a86b8d67aceb485eb3631 upstream.

Add the following checks from __do_loopback() to clone_private_mount() as
well:

 - verify that the mount is in the current namespace

 - verify that there are no locked children

Reported-by: Alois Wohlschlager <alois1@gmx-topmail.de>
Fixes: c771d683a62e ("vfs: introduce clone_private_mount()")
Cc: <stable@vger.kernel.org> # v3.18
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/namespace.c |   42 +++++++++++++++++++++++++++---------------
 1 file changed, 27 insertions(+), 15 deletions(-)

--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1853,6 +1853,20 @@ void drop_collected_mounts(struct vfsmou
 	namespace_unlock();
 }
 
+static bool has_locked_children(struct mount *mnt, struct dentry *dentry)
+{
+	struct mount *child;
+
+	list_for_each_entry(child, &mnt->mnt_mounts, mnt_child) {
+		if (!is_subdir(child->mnt_mountpoint, dentry))
+			continue;
+
+		if (child->mnt.mnt_flags & MNT_LOCKED)
+			return true;
+	}
+	return false;
+}
+
 /**
  * clone_private_mount - create a private clone of a path
  *
@@ -1867,16 +1881,27 @@ struct vfsmount *clone_private_mount(str
 	struct mount *old_mnt = real_mount(path->mnt);
 	struct mount *new_mnt;
 
+	down_read(&namespace_sem);
 	if (IS_MNT_UNBINDABLE(old_mnt))
-		return ERR_PTR(-EINVAL);
+		goto invalid;
+
+	if (!check_mnt(old_mnt))
+		goto invalid;
+
+	if (has_locked_children(old_mnt, path->dentry))
+		goto invalid;
 
-	down_read(&namespace_sem);
 	new_mnt = clone_mnt(old_mnt, path->dentry, CL_PRIVATE);
 	up_read(&namespace_sem);
+
 	if (IS_ERR(new_mnt))
 		return ERR_CAST(new_mnt);
 
 	return &new_mnt->mnt;
+
+invalid:
+	up_read(&namespace_sem);
+	return ERR_PTR(-EINVAL);
 }
 EXPORT_SYMBOL_GPL(clone_private_mount);
 
@@ -2192,19 +2217,6 @@ static int do_change_type(struct path *p
 	return err;
 }
 
-static bool has_locked_children(struct mount *mnt, struct dentry *dentry)
-{
-	struct mount *child;
-	list_for_each_entry(child, &mnt->mnt_mounts, mnt_child) {
-		if (!is_subdir(child->mnt_mountpoint, dentry))
-			continue;
-
-		if (child->mnt.mnt_flags & MNT_LOCKED)
-			return true;
-	}
-	return false;
-}
-
 /*
  * do loopback mount.
  */

Re: [PATCH 4.9 00/30] 4.9.280-rc1 review

[Shuah Khan]

On 8/13/21 9:06 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.280 release.
> There are 30 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 15 Aug 2021 15:05:12 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.280-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.9 00/30] 4.9.280-rc1 review

[Naresh Kamboju]

On Fri, 13 Aug 2021 at 20:40, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.280 release.
> There are 30 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 15 Aug 2021 15:05:12 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.280-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.9.280-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.9.y
* git commit: 5124b049250fa384487453ee2be70fbf82aea45c
* git describe: v4.9.279-31-g5124b049250f
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.279-31-g5124b049250f

## No regressions (compared to v4.9.279-31-g58fff7715c9c)

## No fixes (compared to v4.9.279-31-g58fff7715c9c)

## Test result summary
total: 74784, pass: 58530, fail: 535, skip: 13533, xfail: 2186

## Build Summary
* arm: 98 total, 98 passed, 0 failed
* arm64: 25 total, 25 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 15 total, 15 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 36 total, 36 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 15 total, 15 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.9 00/30] 4.9.280-rc1 review

[Guenter Roeck]

On Fri, Aug 13, 2021 at 05:06:28PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.280 release.
> There are 30 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 15 Aug 2021 15:05:12 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 163 pass: 163 fail: 0
Qemu test results:
	total: 394 pass: 394 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter