* [PATCH stable 5.16 1/2] bnx2x: Utilize firmware 7.13.21.0
@ 2022-01-25 18:57 Manish Chopra
2022-01-25 18:57 ` [PATCH stable 5.16 2/2] bnx2x: Invalidate fastpath HSI version for VFs Manish Chopra
2022-01-27 15:23 ` [PATCH stable 5.16 1/2] bnx2x: Utilize firmware 7.13.21.0 Greg KH
0 siblings, 2 replies; 3+ messages in thread
From: Manish Chopra @ 2022-01-25 18:57 UTC (permalink / raw)
To: stable; +Cc: aelior, gregkh, manishc
commit b7a49f73059fe6147b6b78e8f674ce0d21237432 upstream
This new firmware addresses few important issues and enhancements
as mentioned below -
- Support direct invalidation of FP HSI Ver per function ID, required for
invalidating FP HSI Ver prior to each VF start, as there is no VF start
- BRB hardware block parity error detection support for the driver
- Fix the FCOE underrun flow
- Fix PSOD during FCoE BFS over the NIC ports after preboot driver
- Maintains backward compatibility
This patch incorporates this new firmware 7.13.21.0 in bnx2x driver.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 11 +++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 6 +-
.../net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h | 2 +
drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 3 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 75 +++++++++++++++-------
5 files changed, 69 insertions(+), 28 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index d049948..bb3ba61 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1850,6 +1850,14 @@ struct bnx2x {
/* Vxlan/Geneve related information */
u16 udp_tunnel_ports[BNX2X_UDP_PORT_MAX];
+
+#define FW_CAP_INVALIDATE_VF_FP_HSI BIT(0)
+ u32 fw_cap;
+
+ u32 fw_major;
+ u32 fw_minor;
+ u32 fw_rev;
+ u32 fw_eng;
};
/* Tx queues may be less or equal to Rx queues */
@@ -2526,5 +2534,6 @@ enum {
* Meant for implicit re-load flows.
*/
int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp);
-
+int bnx2x_init_firmware(struct bnx2x *bp);
+void bnx2x_release_firmware(struct bnx2x *bp);
#endif /* bnx2x.h */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 1a6ec1a..1083c5f 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2364,10 +2364,8 @@ int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err)
if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP &&
load_code != FW_MSG_CODE_DRV_LOAD_COMMON) {
/* build my FW version dword */
- u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) +
- (BCM_5710_FW_MINOR_VERSION << 8) +
- (BCM_5710_FW_REVISION_VERSION << 16) +
- (BCM_5710_FW_ENGINEERING_VERSION << 24);
+ u32 my_fw = (bp->fw_major) + (bp->fw_minor << 8) +
+ (bp->fw_rev << 16) + (bp->fw_eng << 24);
/* read loaded FW from chip */
u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
index 3f84352..a84d015 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
@@ -241,6 +241,8 @@
IRO[221].m2))
#define XSTORM_VF_TO_PF_OFFSET(funcId) \
(IRO[48].base + ((funcId) * IRO[48].m1))
+#define XSTORM_ETH_FUNCTION_INFO_FP_HSI_VALID_E2_OFFSET(fid) \
+ (IRO[386].base + ((fid) * IRO[386].m1))
#define COMMON_ASM_INVALID_ASSERT_OPCODE 0x0
/* eth hsi version */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 622fadc..611efee 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -3024,7 +3024,8 @@ struct afex_stats {
#define BCM_5710_FW_MAJOR_VERSION 7
#define BCM_5710_FW_MINOR_VERSION 13
-#define BCM_5710_FW_REVISION_VERSION 15
+#define BCM_5710_FW_REVISION_VERSION 21
+#define BCM_5710_FW_REVISION_VERSION_V15 15
#define BCM_5710_FW_ENGINEERING_VERSION 0
#define BCM_5710_FW_COMPILE_FLAGS 1
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 28069b2..9a86367 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -74,9 +74,19 @@
__stringify(BCM_5710_FW_MINOR_VERSION) "." \
__stringify(BCM_5710_FW_REVISION_VERSION) "." \
__stringify(BCM_5710_FW_ENGINEERING_VERSION)
+
+#define FW_FILE_VERSION_V15 \
+ __stringify(BCM_5710_FW_MAJOR_VERSION) "." \
+ __stringify(BCM_5710_FW_MINOR_VERSION) "." \
+ __stringify(BCM_5710_FW_REVISION_VERSION_V15) "." \
+ __stringify(BCM_5710_FW_ENGINEERING_VERSION)
+
#define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw"
#define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw"
#define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw"
+#define FW_FILE_NAME_E1_V15 "bnx2x/bnx2x-e1-" FW_FILE_VERSION_V15 ".fw"
+#define FW_FILE_NAME_E1H_V15 "bnx2x/bnx2x-e1h-" FW_FILE_VERSION_V15 ".fw"
+#define FW_FILE_NAME_E2_V15 "bnx2x/bnx2x-e2-" FW_FILE_VERSION_V15 ".fw"
/* Time in jiffies before concluding the transmitter is hung */
#define TX_TIMEOUT (5*HZ)
@@ -747,9 +757,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp)
CHIP_IS_E1(bp) ? "everest1" :
CHIP_IS_E1H(bp) ? "everest1h" :
CHIP_IS_E2(bp) ? "everest2" : "everest3",
- BCM_5710_FW_MAJOR_VERSION,
- BCM_5710_FW_MINOR_VERSION,
- BCM_5710_FW_REVISION_VERSION);
+ bp->fw_major, bp->fw_minor, bp->fw_rev);
return rc;
}
@@ -12355,6 +12363,15 @@ static int bnx2x_init_bp(struct bnx2x *bp)
bnx2x_read_fwinfo(bp);
+ if (IS_PF(bp)) {
+ rc = bnx2x_init_firmware(bp);
+
+ if (rc) {
+ bnx2x_free_mem_bp(bp);
+ return rc;
+ }
+ }
+
func = BP_FUNC(bp);
/* need to reset chip if undi was active */
@@ -12367,6 +12384,7 @@ static int bnx2x_init_bp(struct bnx2x *bp)
rc = bnx2x_prev_unload(bp);
if (rc) {
+ bnx2x_release_firmware(bp);
bnx2x_free_mem_bp(bp);
return rc;
}
@@ -13366,16 +13384,11 @@ static int bnx2x_check_firmware(struct bnx2x *bp)
/* Check FW version */
offset = be32_to_cpu(fw_hdr->fw_version.offset);
fw_ver = firmware->data + offset;
- if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
- (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
- (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
- (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
+ if (fw_ver[0] != bp->fw_major || fw_ver[1] != bp->fw_minor ||
+ fw_ver[2] != bp->fw_rev || fw_ver[3] != bp->fw_eng) {
BNX2X_ERR("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n",
- fw_ver[0], fw_ver[1], fw_ver[2], fw_ver[3],
- BCM_5710_FW_MAJOR_VERSION,
- BCM_5710_FW_MINOR_VERSION,
- BCM_5710_FW_REVISION_VERSION,
- BCM_5710_FW_ENGINEERING_VERSION);
+ fw_ver[0], fw_ver[1], fw_ver[2], fw_ver[3],
+ bp->fw_major, bp->fw_minor, bp->fw_rev, bp->fw_eng);
return -EINVAL;
}
@@ -13453,34 +13466,51 @@ static void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
(u8 *)bp->arr, len); \
} while (0)
-static int bnx2x_init_firmware(struct bnx2x *bp)
+int bnx2x_init_firmware(struct bnx2x *bp)
{
- const char *fw_file_name;
+ const char *fw_file_name, *fw_file_name_v15;
struct bnx2x_fw_file_hdr *fw_hdr;
int rc;
if (bp->firmware)
return 0;
- if (CHIP_IS_E1(bp))
+ if (CHIP_IS_E1(bp)) {
fw_file_name = FW_FILE_NAME_E1;
- else if (CHIP_IS_E1H(bp))
+ fw_file_name_v15 = FW_FILE_NAME_E1_V15;
+ } else if (CHIP_IS_E1H(bp)) {
fw_file_name = FW_FILE_NAME_E1H;
- else if (!CHIP_IS_E1x(bp))
+ fw_file_name_v15 = FW_FILE_NAME_E1H_V15;
+ } else if (!CHIP_IS_E1x(bp)) {
fw_file_name = FW_FILE_NAME_E2;
- else {
+ fw_file_name_v15 = FW_FILE_NAME_E2_V15;
+ } else {
BNX2X_ERR("Unsupported chip revision\n");
return -EINVAL;
}
+
BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev);
if (rc) {
- BNX2X_ERR("Can't load firmware file %s\n",
- fw_file_name);
- goto request_firmware_exit;
+ BNX2X_DEV_INFO("Trying to load older fw %s\n", fw_file_name_v15);
+
+ /* try to load prev version */
+ rc = request_firmware(&bp->firmware, fw_file_name_v15, &bp->pdev->dev);
+
+ if (rc)
+ goto request_firmware_exit;
+
+ bp->fw_rev = BCM_5710_FW_REVISION_VERSION_V15;
+ } else {
+ bp->fw_cap |= FW_CAP_INVALIDATE_VF_FP_HSI;
+ bp->fw_rev = BCM_5710_FW_REVISION_VERSION;
}
+ bp->fw_major = BCM_5710_FW_MAJOR_VERSION;
+ bp->fw_minor = BCM_5710_FW_MINOR_VERSION;
+ bp->fw_eng = BCM_5710_FW_ENGINEERING_VERSION;
+
rc = bnx2x_check_firmware(bp);
if (rc) {
BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
@@ -13536,7 +13566,7 @@ static int bnx2x_init_firmware(struct bnx2x *bp)
return rc;
}
-static void bnx2x_release_firmware(struct bnx2x *bp)
+void bnx2x_release_firmware(struct bnx2x *bp)
{
kfree(bp->init_ops_offsets);
kfree(bp->init_ops);
@@ -14053,6 +14083,7 @@ static int bnx2x_init_one(struct pci_dev *pdev,
return 0;
init_one_freemem:
+ bnx2x_release_firmware(bp);
bnx2x_free_mem_bp(bp);
init_one_exit:
--
1.8.3.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH stable 5.16 2/2] bnx2x: Invalidate fastpath HSI version for VFs
2022-01-25 18:57 [PATCH stable 5.16 1/2] bnx2x: Utilize firmware 7.13.21.0 Manish Chopra
@ 2022-01-25 18:57 ` Manish Chopra
2022-01-27 15:23 ` [PATCH stable 5.16 1/2] bnx2x: Utilize firmware 7.13.21.0 Greg KH
1 sibling, 0 replies; 3+ messages in thread
From: Manish Chopra @ 2022-01-25 18:57 UTC (permalink / raw)
To: stable; +Cc: aelior, gregkh, manishc
commit 802d4d207e75d7208ff75adb712b556c1e91cf1c upstream
Commit 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.")
added validation for fastpath HSI versions for different
client init which was not meant for SR-IOV VF clients, which
resulted in firmware asserts when running VF clients with
different fastpath HSI version.
This patch along with the new firmware support in patch #1
fixes this behavior in order to not validate fastpath HSI
version for the VFs.
Fixes: 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 9c2f51f..052f7ff 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -758,9 +758,18 @@ static void bnx2x_vf_igu_reset(struct bnx2x *bp, struct bnx2x_virtf *vf)
void bnx2x_vf_enable_access(struct bnx2x *bp, u8 abs_vfid)
{
+ u16 abs_fid;
+
+ abs_fid = FW_VF_HANDLE(abs_vfid);
+
/* set the VF-PF association in the FW */
- storm_memset_vf_to_pf(bp, FW_VF_HANDLE(abs_vfid), BP_FUNC(bp));
- storm_memset_func_en(bp, FW_VF_HANDLE(abs_vfid), 1);
+ storm_memset_vf_to_pf(bp, abs_fid, BP_FUNC(bp));
+ storm_memset_func_en(bp, abs_fid, 1);
+
+ /* Invalidate fp_hsi version for vfs */
+ if (bp->fw_cap & FW_CAP_INVALIDATE_VF_FP_HSI)
+ REG_WR8(bp, BAR_XSTRORM_INTMEM +
+ XSTORM_ETH_FUNCTION_INFO_FP_HSI_VALID_E2_OFFSET(abs_fid), 0);
/* clear vf errors*/
bnx2x_vf_semi_clear_err(bp, abs_vfid);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH stable 5.16 1/2] bnx2x: Utilize firmware 7.13.21.0
2022-01-25 18:57 [PATCH stable 5.16 1/2] bnx2x: Utilize firmware 7.13.21.0 Manish Chopra
2022-01-25 18:57 ` [PATCH stable 5.16 2/2] bnx2x: Invalidate fastpath HSI version for VFs Manish Chopra
@ 2022-01-27 15:23 ` Greg KH
1 sibling, 0 replies; 3+ messages in thread
From: Greg KH @ 2022-01-27 15:23 UTC (permalink / raw)
To: Manish Chopra; +Cc: stable, aelior
On Tue, Jan 25, 2022 at 10:57:48AM -0800, Manish Chopra wrote:
> commit b7a49f73059fe6147b6b78e8f674ce0d21237432 upstream
>
> This new firmware addresses few important issues and enhancements
> as mentioned below -
>
> - Support direct invalidation of FP HSI Ver per function ID, required for
> invalidating FP HSI Ver prior to each VF start, as there is no VF start
> - BRB hardware block parity error detection support for the driver
> - Fix the FCOE underrun flow
> - Fix PSOD during FCoE BFS over the NIC ports after preboot driver
> - Maintains backward compatibility
>
> This patch incorporates this new firmware 7.13.21.0 in bnx2x driver.
>
> Signed-off-by: Manish Chopra <manishc@marvell.com>
> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
> Signed-off-by: Alok Prasad <palok@marvell.com>
> Signed-off-by: Ariel Elior <aelior@marvell.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> ---
> drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 11 +++-
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 6 +-
> .../net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h | 2 +
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 3 +-
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 75 +++++++++++++++-------
> 5 files changed, 69 insertions(+), 28 deletions(-)
All backports now queued up, thanks.
greg k-h
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-01-27 15:23 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-25 18:57 [PATCH stable 5.16 1/2] bnx2x: Utilize firmware 7.13.21.0 Manish Chopra
2022-01-25 18:57 ` [PATCH stable 5.16 2/2] bnx2x: Invalidate fastpath HSI version for VFs Manish Chopra
2022-01-27 15:23 ` [PATCH stable 5.16 1/2] bnx2x: Utilize firmware 7.13.21.0 Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).