[PATCH 5.15 00/32] 5.15.20-rc1 review

[PATCH 5.15 00/32] 5.15.20-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.15.20 release.
There are 32 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 06 Feb 2022 09:19:05 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.20-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.15.20-rc1

Eric Dumazet <edumazet@google.com>
    tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()

Eric Dumazet <edumazet@google.com>
    af_packet: fix data-race in packet_setsockopt / packet_setsockopt

Sasha Neftin <sasha.neftin@intel.com>
    e1000e: Handshake with CSME starts from ADL platforms

Tianchen Ding <dtcccc@linux.alibaba.com>
    cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask()

Eric Dumazet <edumazet@google.com>
    rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink()

Eric Dumazet <edumazet@google.com>
    net: sched: fix use-after-free in tc_new_tfilter()

Dan Carpenter <dan.carpenter@oracle.com>
    fanotify: Fix stale file descriptor in copy_event_to_user()

Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
    net: amd-xgbe: Fix skb data length underflow

Raju Rangoju <Raju.Rangoju@amd.com>
    net: amd-xgbe: ensure to reset the tx_timer_active flag

Karen Sornek <karen.sornek@intel.com>
    i40e: Fix reset path while removing the driver

Jedrzej Jagielski <jedrzej.jagielski@intel.com>
    i40e: Fix reset bw limit when DCB enabled with 1 TC

Georgi Valkov <gvalkov@abv.bg>
    ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

Maor Dickman <maord@nvidia.com>
    net/mlx5: E-Switch, Fix uninitialized variable modact

Roi Dayan <roid@nvidia.com>
    net/mlx5: Bridge, Fix devlink deadlock on net namespace deletion

Maxim Mikityanskiy <maximmi@nvidia.com>
    net/mlx5e: Don't treat small ceil values as unlimited in HTB offload

Dima Chumak <dchumak@nvidia.com>
    net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE

Gal Pressman <gal@nvidia.com>
    net/mlx5e: Fix module EEPROM query

Maher Sanalla <msanalla@nvidia.com>
    net/mlx5: Use del_timer_sync in fw reset flow of halting poll

Maor Dickman <maord@nvidia.com>
    net/mlx5e: Fix handling of wrong devices during bond netevent

Vlad Buslov <vladbu@nvidia.com>
    net/mlx5: Bridge, ensure dev_name is null-terminated

Vlad Buslov <vladbu@nvidia.com>
    net/mlx5: Bridge, take rtnl lock in init error handler

Raed Salem <raeds@nvidia.com>
    net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic

J. Bruce Fields <bfields@redhat.com>
    lockd: fix failure to cleanup client locks

J. Bruce Fields <bfields@redhat.com>
    lockd: fix server crash on reboot of client holding lock

Miklos Szeredi <mszeredi@redhat.com>
    ovl: don't fail copy up if no fileattr support on upper

John Hubbard <jhubbard@nvidia.com>
    Revert "mm/gup: small refactoring: simplify try_grab_page()"

Eric W. Biederman <ebiederm@xmission.com>
    cgroup-v1: Require capabilities to set release_agent

Maxime Ripard <maxime@cerno.tech>
    drm/vc4: hdmi: Make sure the device is powered with CEC

Alex Elder <elder@linaro.org>
    net: ipa: prevent concurrent replenish

Alex Elder <elder@linaro.org>
    net: ipa: use a bitmap for endpoint replenish_enabled

Paolo Abeni <pabeni@redhat.com>
    selftests: mptcp: fix ipv6 routing setup

Lukas Wunner <lukas@wunner.de>
    PCI: pciehp: Fix infinite loop in IRQ handler upon power fault


-------------

Diffstat:

 Makefile                                           |  4 +--
 drivers/gpu/drm/vc4/vc4_hdmi.c                     | 25 ++++++++--------
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c           | 14 ++++++++-
 drivers/net/ethernet/intel/e1000e/netdev.c         |  6 ++--
 drivers/net/ethernet/intel/i40e/i40e.h             |  1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c        | 31 +++++++++++++++++--
 drivers/net/ethernet/mellanox/mlx5/core/en/qos.c   |  3 +-
 .../net/ethernet/mellanox/mlx5/core/en/rep/bond.c  | 32 +++++++++-----------
 .../ethernet/mellanox/mlx5/core/en/rep/bridge.c    |  6 ++--
 .../mellanox/mlx5/core/en_accel/ipsec_rxtx.c       | 13 ++++++--
 .../net/ethernet/mellanox/mlx5/core/esw/bridge.c   |  4 +++
 .../mlx5/core/esw/diag/bridge_tracepoint.h         |  2 +-
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c |  2 +-
 .../ethernet/mellanox/mlx5/core/lib/fs_chains.c    |  9 +++---
 drivers/net/ethernet/mellanox/mlx5/core/port.c     |  9 +++---
 drivers/net/ipa/ipa_endpoint.c                     | 21 ++++++++++---
 drivers/net/ipa/ipa_endpoint.h                     | 17 +++++++++--
 drivers/net/usb/ipheth.c                           |  6 ++--
 drivers/pci/hotplug/pciehp_hpc.c                   |  7 +++--
 fs/lockd/svcsubs.c                                 | 18 ++++++-----
 fs/notify/fanotify/fanotify_user.c                 |  6 ++--
 fs/overlayfs/copy_up.c                             | 12 +++++++-
 kernel/cgroup/cgroup-v1.c                          | 14 +++++++++
 kernel/cgroup/cpuset.c                             |  3 +-
 mm/gup.c                                           | 35 ++++++++++++++++++----
 net/core/rtnetlink.c                               |  6 ++--
 net/ipv4/tcp_input.c                               |  2 ++
 net/packet/af_packet.c                             |  8 +++--
 net/sched/cls_api.c                                | 11 ++++---
 tools/testing/selftests/net/mptcp/mptcp_join.sh    |  5 ++--
 30 files changed, 239 insertions(+), 93 deletions(-)

[PATCH 5.15 01/32] PCI: pciehp: Fix infinite loop in IRQ handler upon power fault

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

commit 23584c1ed3e15a6f4bfab8dc5a88d94ab929ee12 upstream.

The Power Fault Detected bit in the Slot Status register differs from
all other hotplug events in that it is sticky:  It can only be cleared
after turning off slot power.  Per PCIe r5.0, sec. 6.7.1.8:

  If a power controller detects a main power fault on the hot-plug slot,
  it must automatically set its internal main power fault latch [...].
  The main power fault latch is cleared when software turns off power to
  the hot-plug slot.

The stickiness used to cause interrupt storms and infinite loops which
were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault
interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable
software notification on empty slots").

Unfortunately in 2020 the infinite loop issue was inadvertently
reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt
race"):  The hardirq handler pciehp_isr() clears the PFD bit until
pciehp's power_fault_detected flag is set.  That happens in the IRQ
thread pciehp_ist(), which never learns of the event because the hardirq
handler is stuck in an infinite loop.  Fix by setting the
power_fault_detected flag already in the hardirq handler.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=214989
Link: https://lore.kernel.org/linux-pci/DM8PR11MB5702255A6A92F735D90A4446868B9@DM8PR11MB5702.namprd11.prod.outlook.com
Fixes: 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race")
Link: https://lore.kernel.org/r/66eaeef31d4997ceea357ad93259f290ededecfd.1637187226.git.lukas@wunner.de
Reported-by: Joseph Bao <joseph.bao@intel.com>
Tested-by: Joseph Bao <joseph.bao@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.19+
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/hotplug/pciehp_hpc.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -642,6 +642,8 @@ read_status:
 	 */
 	if (ctrl->power_fault_detected)
 		status &= ~PCI_EXP_SLTSTA_PFD;
+	else if (status & PCI_EXP_SLTSTA_PFD)
+		ctrl->power_fault_detected = true;
 
 	events |= status;
 	if (!events) {
@@ -651,7 +653,7 @@ read_status:
 	}
 
 	if (status) {
-		pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, events);
+		pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, status);
 
 		/*
 		 * In MSI mode, all event bits must be zero before the port
@@ -725,8 +727,7 @@ static irqreturn_t pciehp_ist(int irq, v
 	}
 
 	/* Check Power Fault Detected */
-	if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
-		ctrl->power_fault_detected = 1;
+	if (events & PCI_EXP_SLTSTA_PFD) {
 		ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(ctrl));
 		pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
 				      PCI_EXP_SLTCTL_ATTN_IND_ON);

[PATCH 5.15 02/32] selftests: mptcp: fix ipv6 routing setup

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

commit 9846921dba4936d92f7608315b5d1e0a8ec3a538 upstream.

MPJ ipv6 selftests currently lack per link route to the server
net. Additionally, ipv6 subflows endpoints are created without any
interface specified. The end-result is that in ipv6 self-tests
subflows are created all on the same link, leading to expected delays
and sporadic self-tests failures.

Fix the issue by adding the missing setup bits.

Fixes: 523514ed0a99 ("selftests: mptcp: add ADD_ADDR IPv6 test cases")
Reported-and-tested-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/net/mptcp/mptcp_join.sh |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -75,6 +75,7 @@ init()
 
 		# let $ns2 reach any $ns1 address from any interface
 		ip -net "$ns2" route add default via 10.0.$i.1 dev ns2eth$i metric 10$i
+		ip -net "$ns2" route add default via dead:beef:$i::1 dev ns2eth$i metric 10$i
 	done
 }
 
@@ -1383,7 +1384,7 @@ ipv6_tests()
 	reset
 	ip netns exec $ns1 ./pm_nl_ctl limits 0 1
 	ip netns exec $ns2 ./pm_nl_ctl limits 0 1
-	ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow
+	ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 dev ns2eth3 flags subflow
 	run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
 	chk_join_nr "single subflow IPv6" 1 1 1
 
@@ -1418,7 +1419,7 @@ ipv6_tests()
 	ip netns exec $ns1 ./pm_nl_ctl limits 0 2
 	ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
 	ip netns exec $ns2 ./pm_nl_ctl limits 1 2
-	ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow
+	ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 dev ns2eth3 flags subflow
 	run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow
 	chk_join_nr "remove subflow and signal IPv6" 2 2 2
 	chk_add_nr 1 1

[PATCH 5.15 03/32] net: ipa: use a bitmap for endpoint replenish_enabled

[Greg Kroah-Hartman]

From: Alex Elder <elder@linaro.org>

commit c1aaa01dbf4cef95af3e04a5a43986c290e06ea3 upstream.

Define a new replenish_flags bitmap to contain Boolean flags
associated with an endpoint's replenishing state.  Replace the
replenish_enabled field with a flag in that bitmap.  This is to
prepare for the next patch, which adds another flag.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ipa/ipa_endpoint.c |    8 ++++----
 drivers/net/ipa/ipa_endpoint.h |   15 +++++++++++++--
 2 files changed, 17 insertions(+), 6 deletions(-)

--- a/drivers/net/ipa/ipa_endpoint.c
+++ b/drivers/net/ipa/ipa_endpoint.c
@@ -1069,7 +1069,7 @@ static void ipa_endpoint_replenish(struc
 	u32 backlog;
 	int delta;
 
-	if (!endpoint->replenish_enabled) {
+	if (!test_bit(IPA_REPLENISH_ENABLED, endpoint->replenish_flags)) {
 		if (add_one)
 			atomic_inc(&endpoint->replenish_saved);
 		return;
@@ -1106,7 +1106,7 @@ static void ipa_endpoint_replenish_enabl
 	u32 max_backlog;
 	u32 saved;
 
-	endpoint->replenish_enabled = true;
+	set_bit(IPA_REPLENISH_ENABLED, endpoint->replenish_flags);
 	while ((saved = atomic_xchg(&endpoint->replenish_saved, 0)))
 		atomic_add(saved, &endpoint->replenish_backlog);
 
@@ -1120,7 +1120,7 @@ static void ipa_endpoint_replenish_disab
 {
 	u32 backlog;
 
-	endpoint->replenish_enabled = false;
+	clear_bit(IPA_REPLENISH_ENABLED, endpoint->replenish_flags);
 	while ((backlog = atomic_xchg(&endpoint->replenish_backlog, 0)))
 		atomic_add(backlog, &endpoint->replenish_saved);
 }
@@ -1665,7 +1665,7 @@ static void ipa_endpoint_setup_one(struc
 		/* RX transactions require a single TRE, so the maximum
 		 * backlog is the same as the maximum outstanding TREs.
 		 */
-		endpoint->replenish_enabled = false;
+		clear_bit(IPA_REPLENISH_ENABLED, endpoint->replenish_flags);
 		atomic_set(&endpoint->replenish_saved,
 			   gsi_channel_tre_max(gsi, endpoint->channel_id));
 		atomic_set(&endpoint->replenish_backlog, 0);
--- a/drivers/net/ipa/ipa_endpoint.h
+++ b/drivers/net/ipa/ipa_endpoint.h
@@ -41,6 +41,17 @@ enum ipa_endpoint_name {
 #define IPA_ENDPOINT_MAX		32	/* Max supported by driver */
 
 /**
+ * enum ipa_replenish_flag:	RX buffer replenish flags
+ *
+ * @IPA_REPLENISH_ENABLED:	Whether receive buffer replenishing is enabled
+ * @IPA_REPLENISH_COUNT:	Number of defined replenish flags
+ */
+enum ipa_replenish_flag {
+	IPA_REPLENISH_ENABLED,
+	IPA_REPLENISH_COUNT,	/* Number of flags (must be last) */
+};
+
+/**
  * struct ipa_endpoint - IPA endpoint information
  * @ipa:		IPA pointer
  * @ee_id:		Execution environmnent endpoint is associated with
@@ -51,7 +62,7 @@ enum ipa_endpoint_name {
  * @trans_tre_max:	Maximum number of TRE descriptors per transaction
  * @evt_ring_id:	GSI event ring used by the endpoint
  * @netdev:		Network device pointer, if endpoint uses one
- * @replenish_enabled:	Whether receive buffer replenishing is enabled
+ * @replenish_flags:	Replenishing state flags
  * @replenish_ready:	Number of replenish transactions without doorbell
  * @replenish_saved:	Replenish requests held while disabled
  * @replenish_backlog:	Number of buffers needed to fill hardware queue
@@ -72,7 +83,7 @@ struct ipa_endpoint {
 	struct net_device *netdev;
 
 	/* Receive buffer replenishing for RX endpoints */
-	bool replenish_enabled;
+	DECLARE_BITMAP(replenish_flags, IPA_REPLENISH_COUNT);
 	u32 replenish_ready;
 	atomic_t replenish_saved;
 	atomic_t replenish_backlog;

[PATCH 5.15 04/32] net: ipa: prevent concurrent replenish

[Greg Kroah-Hartman]

From: Alex Elder <elder@linaro.org>

commit 998c0bd2b3715244da7639cc4e6a2062cb79c3f4 upstream.

We have seen cases where an endpoint RX completion interrupt arrives
while replenishing for the endpoint is underway.  This causes another
instance of replenishing to begin as part of completing the receive
transaction.  If this occurs it can lead to transaction corruption.

Use a new flag to ensure only one replenish instance for an endpoint
executes at a time.

Fixes: 84f9bd12d46db ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ipa/ipa_endpoint.c |   13 +++++++++++++
 drivers/net/ipa/ipa_endpoint.h |    2 ++
 2 files changed, 15 insertions(+)

--- a/drivers/net/ipa/ipa_endpoint.c
+++ b/drivers/net/ipa/ipa_endpoint.c
@@ -1075,15 +1075,27 @@ static void ipa_endpoint_replenish(struc
 		return;
 	}
 
+	/* If already active, just update the backlog */
+	if (test_and_set_bit(IPA_REPLENISH_ACTIVE, endpoint->replenish_flags)) {
+		if (add_one)
+			atomic_inc(&endpoint->replenish_backlog);
+		return;
+	}
+
 	while (atomic_dec_not_zero(&endpoint->replenish_backlog))
 		if (ipa_endpoint_replenish_one(endpoint))
 			goto try_again_later;
+
+	clear_bit(IPA_REPLENISH_ACTIVE, endpoint->replenish_flags);
+
 	if (add_one)
 		atomic_inc(&endpoint->replenish_backlog);
 
 	return;
 
 try_again_later:
+	clear_bit(IPA_REPLENISH_ACTIVE, endpoint->replenish_flags);
+
 	/* The last one didn't succeed, so fix the backlog */
 	delta = add_one ? 2 : 1;
 	backlog = atomic_add_return(delta, &endpoint->replenish_backlog);
@@ -1666,6 +1678,7 @@ static void ipa_endpoint_setup_one(struc
 		 * backlog is the same as the maximum outstanding TREs.
 		 */
 		clear_bit(IPA_REPLENISH_ENABLED, endpoint->replenish_flags);
+		clear_bit(IPA_REPLENISH_ACTIVE, endpoint->replenish_flags);
 		atomic_set(&endpoint->replenish_saved,
 			   gsi_channel_tre_max(gsi, endpoint->channel_id));
 		atomic_set(&endpoint->replenish_backlog, 0);
--- a/drivers/net/ipa/ipa_endpoint.h
+++ b/drivers/net/ipa/ipa_endpoint.h
@@ -44,10 +44,12 @@ enum ipa_endpoint_name {
  * enum ipa_replenish_flag:	RX buffer replenish flags
  *
  * @IPA_REPLENISH_ENABLED:	Whether receive buffer replenishing is enabled
+ * @IPA_REPLENISH_ACTIVE:	Whether replenishing is underway
  * @IPA_REPLENISH_COUNT:	Number of defined replenish flags
  */
 enum ipa_replenish_flag {
 	IPA_REPLENISH_ENABLED,
+	IPA_REPLENISH_ACTIVE,
 	IPA_REPLENISH_COUNT,	/* Number of flags (must be last) */
 };
 

[PATCH 5.15 05/32] drm/vc4: hdmi: Make sure the device is powered with CEC

[Greg Kroah-Hartman]

From: Maxime Ripard <maxime@cerno.tech>

Commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream.

The original commit depended on a rework commit (724fc856c09e ("drm/vc4:
hdmi: Split the CEC disable / enable functions in two")) that
(rightfully) didn't reach stable.

However, probably because the context changed, when the patch was
applied to stable the pm_runtime_put called got moved to the end of the
vc4_hdmi_cec_adap_enable function (that would have become
vc4_hdmi_cec_disable with the rework) to vc4_hdmi_cec_init.

This means that at probe time, we now drop our reference to the clocks
and power domains and thus end up with a CPU hang when the CPU tries to
access registers.

The call to pm_runtime_resume_and_get() is also problematic since the
.adap_enable CEC hook is called both to enable and to disable the
controller. That means that we'll now call pm_runtime_resume_and_get()
at disable time as well, messing with the reference counting.

The behaviour we should have though would be to have
pm_runtime_resume_and_get() called when the CEC controller is enabled,
and pm_runtime_put when it's disabled.

We need to move things around a bit to behave that way, but it aligns
stable with upstream.

Cc: <stable@vger.kernel.org> # 5.10.x
Cc: <stable@vger.kernel.org> # 5.15.x
Cc: <stable@vger.kernel.org> # 5.16.x
Reported-by: Michael Stapelberg <michael+drm@stapelberg.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c |   25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1738,18 +1738,18 @@ static int vc4_hdmi_cec_adap_enable(stru
 	u32 val;
 	int ret;
 
-	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
-	if (ret)
-		return ret;
+	if (enable) {
+		ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+		if (ret)
+			return ret;
 
-	val = HDMI_READ(HDMI_CEC_CNTRL_5);
-	val &= ~(VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET |
-		 VC4_HDMI_CEC_CNT_TO_4700_US_MASK |
-		 VC4_HDMI_CEC_CNT_TO_4500_US_MASK);
-	val |= ((4700 / usecs) << VC4_HDMI_CEC_CNT_TO_4700_US_SHIFT) |
-	       ((4500 / usecs) << VC4_HDMI_CEC_CNT_TO_4500_US_SHIFT);
+		val = HDMI_READ(HDMI_CEC_CNTRL_5);
+		val &= ~(VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET |
+			 VC4_HDMI_CEC_CNT_TO_4700_US_MASK |
+			 VC4_HDMI_CEC_CNT_TO_4500_US_MASK);
+		val |= ((4700 / usecs) << VC4_HDMI_CEC_CNT_TO_4700_US_SHIFT) |
+			((4500 / usecs) << VC4_HDMI_CEC_CNT_TO_4500_US_SHIFT);
 
-	if (enable) {
 		HDMI_WRITE(HDMI_CEC_CNTRL_5, val |
 			   VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET);
 		HDMI_WRITE(HDMI_CEC_CNTRL_5, val);
@@ -1777,7 +1777,10 @@ static int vc4_hdmi_cec_adap_enable(stru
 			HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, VC4_HDMI_CPU_CEC);
 		HDMI_WRITE(HDMI_CEC_CNTRL_5, val |
 			   VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET);
+
+		pm_runtime_put(&vc4_hdmi->pdev->dev);
 	}
+
 	return 0;
 }
 
@@ -1888,8 +1891,6 @@ static int vc4_hdmi_cec_init(struct vc4_
 	if (ret < 0)
 		goto err_remove_handlers;
 
-	pm_runtime_put(&vc4_hdmi->pdev->dev);
-
 	return 0;
 
 err_remove_handlers:

Re: [PATCH 5.15 05/32] drm/vc4: hdmi: Make sure the device is powered with CEC

[Guenter Roeck]

On Fri, Feb 04, 2022 at 10:22:15AM +0100, Greg Kroah-Hartman wrote:
> From: Maxime Ripard <maxime@cerno.tech>
> 
> Commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream.
> 
> The original commit depended on a rework commit (724fc856c09e ("drm/vc4:
> hdmi: Split the CEC disable / enable functions in two")) that
> (rightfully) didn't reach stable.
> 
> However, probably because the context changed, when the patch was
> applied to stable the pm_runtime_put called got moved to the end of the
> vc4_hdmi_cec_adap_enable function (that would have become
> vc4_hdmi_cec_disable with the rework) to vc4_hdmi_cec_init.
> 
> This means that at probe time, we now drop our reference to the clocks
> and power domains and thus end up with a CPU hang when the CPU tries to
> access registers.
> 
> The call to pm_runtime_resume_and_get() is also problematic since the
> .adap_enable CEC hook is called both to enable and to disable the
> controller. That means that we'll now call pm_runtime_resume_and_get()
> at disable time as well, messing with the reference counting.
> 
> The behaviour we should have though would be to have
> pm_runtime_resume_and_get() called when the CEC controller is enabled,
> and pm_runtime_put when it's disabled.
> 
> We need to move things around a bit to behave that way, but it aligns
> stable with upstream.
> 
> Cc: <stable@vger.kernel.org> # 5.10.x
> Cc: <stable@vger.kernel.org> # 5.15.x
> Cc: <stable@vger.kernel.org> # 5.16.x
> Reported-by: Michael Stapelberg <michael+drm@stapelberg.ch>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/gpu/drm/vc4/vc4_hdmi.c |   25 +++++++++++++------------
>  1 file changed, 13 insertions(+), 12 deletions(-)
> 
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -1738,18 +1738,18 @@ static int vc4_hdmi_cec_adap_enable(stru
>  	u32 val;
>  	int ret;
>  
> -	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
> -	if (ret)
> -		return ret;
> +	if (enable) {
> +		ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
> +		if (ret)
> +			return ret;
>  
> -	val = HDMI_READ(HDMI_CEC_CNTRL_5);
> -	val &= ~(VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET |
> -		 VC4_HDMI_CEC_CNT_TO_4700_US_MASK |
> -		 VC4_HDMI_CEC_CNT_TO_4500_US_MASK);
> -	val |= ((4700 / usecs) << VC4_HDMI_CEC_CNT_TO_4700_US_SHIFT) |
> -	       ((4500 / usecs) << VC4_HDMI_CEC_CNT_TO_4500_US_SHIFT);
> +		val = HDMI_READ(HDMI_CEC_CNTRL_5);
> +		val &= ~(VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET |
> +			 VC4_HDMI_CEC_CNT_TO_4700_US_MASK |
> +			 VC4_HDMI_CEC_CNT_TO_4500_US_MASK);
> +		val |= ((4700 / usecs) << VC4_HDMI_CEC_CNT_TO_4700_US_SHIFT) |
> +			((4500 / usecs) << VC4_HDMI_CEC_CNT_TO_4500_US_SHIFT);

Unfortunately this is broken because it leaves the still existing
else path with

               if (!vc4_hdmi->variant->external_irq_controller)
                        HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, VC4_HDMI_CPU_CEC);
                HDMI_WRITE(HDMI_CEC_CNTRL_5, val |
                           VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET);

where 'val' is now uninitialized. I don't know how to fix this up properly,
so I won't even try.

Guenter

Re: [PATCH 5.15 05/32] drm/vc4: hdmi: Make sure the device is powered with CEC

[Greg Kroah-Hartman]

On Sat, Feb 05, 2022 at 09:12:38AM -0800, Guenter Roeck wrote:
> On Fri, Feb 04, 2022 at 10:22:15AM +0100, Greg Kroah-Hartman wrote:
> > From: Maxime Ripard <maxime@cerno.tech>
> > 
> > Commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream.
> > 
> > The original commit depended on a rework commit (724fc856c09e ("drm/vc4:
> > hdmi: Split the CEC disable / enable functions in two")) that
> > (rightfully) didn't reach stable.
> > 
> > However, probably because the context changed, when the patch was
> > applied to stable the pm_runtime_put called got moved to the end of the
> > vc4_hdmi_cec_adap_enable function (that would have become
> > vc4_hdmi_cec_disable with the rework) to vc4_hdmi_cec_init.
> > 
> > This means that at probe time, we now drop our reference to the clocks
> > and power domains and thus end up with a CPU hang when the CPU tries to
> > access registers.
> > 
> > The call to pm_runtime_resume_and_get() is also problematic since the
> > .adap_enable CEC hook is called both to enable and to disable the
> > controller. That means that we'll now call pm_runtime_resume_and_get()
> > at disable time as well, messing with the reference counting.
> > 
> > The behaviour we should have though would be to have
> > pm_runtime_resume_and_get() called when the CEC controller is enabled,
> > and pm_runtime_put when it's disabled.
> > 
> > We need to move things around a bit to behave that way, but it aligns
> > stable with upstream.
> > 
> > Cc: <stable@vger.kernel.org> # 5.10.x
> > Cc: <stable@vger.kernel.org> # 5.15.x
> > Cc: <stable@vger.kernel.org> # 5.16.x
> > Reported-by: Michael Stapelberg <michael+drm@stapelberg.ch>
> > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> >  drivers/gpu/drm/vc4/vc4_hdmi.c |   25 +++++++++++++------------
> >  1 file changed, 13 insertions(+), 12 deletions(-)
> > 
> > --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> > +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> > @@ -1738,18 +1738,18 @@ static int vc4_hdmi_cec_adap_enable(stru
> >  	u32 val;
> >  	int ret;
> >  
> > -	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
> > -	if (ret)
> > -		return ret;
> > +	if (enable) {
> > +		ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
> > +		if (ret)
> > +			return ret;
> >  
> > -	val = HDMI_READ(HDMI_CEC_CNTRL_5);
> > -	val &= ~(VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET |
> > -		 VC4_HDMI_CEC_CNT_TO_4700_US_MASK |
> > -		 VC4_HDMI_CEC_CNT_TO_4500_US_MASK);
> > -	val |= ((4700 / usecs) << VC4_HDMI_CEC_CNT_TO_4700_US_SHIFT) |
> > -	       ((4500 / usecs) << VC4_HDMI_CEC_CNT_TO_4500_US_SHIFT);
> > +		val = HDMI_READ(HDMI_CEC_CNTRL_5);
> > +		val &= ~(VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET |
> > +			 VC4_HDMI_CEC_CNT_TO_4700_US_MASK |
> > +			 VC4_HDMI_CEC_CNT_TO_4500_US_MASK);
> > +		val |= ((4700 / usecs) << VC4_HDMI_CEC_CNT_TO_4700_US_SHIFT) |
> > +			((4500 / usecs) << VC4_HDMI_CEC_CNT_TO_4500_US_SHIFT);
> 
> Unfortunately this is broken because it leaves the still existing
> else path with
> 
>                if (!vc4_hdmi->variant->external_irq_controller)
>                         HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, VC4_HDMI_CPU_CEC);
>                 HDMI_WRITE(HDMI_CEC_CNTRL_5, val |
>                            VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET);
> 
> where 'val' is now uninitialized. I don't know how to fix this up properly,
> so I won't even try.

Yeah, something is really wrong here.  I'm going to go revert this for
now and push out a new set of releases with that fixed.

thanks for the review.

greg k-h

Re: [PATCH 5.15 05/32] drm/vc4: hdmi: Make sure the device is powered with CEC

[Guenter Roeck]

Hi Greg,

On Sat, Feb 05, 2022 at 06:56:51PM +0100, Greg Kroah-Hartman wrote:
[ ... ]
> 
> Yeah, something is really wrong here.  I'm going to go revert this for
> now and push out a new set of releases with that fixed.

If you pull a release for that, can you possibly revert 9de2b9286a6
("ASoC: mediatek: Check for error clk pointer") as well ? It does not
realy fix anything but breaks pretty much all Mediatek systems using
the mtk-scpsys driver. I sent a revert request
	https://lore.kernel.org/lkml/20220205014755.699603-1-linux@roeck-us.net/
but the it looks like the submitter keeps defending their patch. In the
current state, pretty much all stable release starting with v4.19.y won't
work for affected systems due to this patch.

Thanks,
Guenter

Re: [PATCH 5.15 05/32] drm/vc4: hdmi: Make sure the device is powered with CEC

[Greg Kroah-Hartman]

On Sat, Feb 05, 2022 at 10:41:08AM -0800, Guenter Roeck wrote:
> Hi Greg,
> 
> On Sat, Feb 05, 2022 at 06:56:51PM +0100, Greg Kroah-Hartman wrote:
> [ ... ]
> > 
> > Yeah, something is really wrong here.  I'm going to go revert this for
> > now and push out a new set of releases with that fixed.
> 
> If you pull a release for that, can you possibly revert 9de2b9286a6
> ("ASoC: mediatek: Check for error clk pointer") as well ? It does not
> realy fix anything but breaks pretty much all Mediatek systems using
> the mtk-scpsys driver. I sent a revert request
> 	https://lore.kernel.org/lkml/20220205014755.699603-1-linux@roeck-us.net/
> but the it looks like the submitter keeps defending their patch. In the
> current state, pretty much all stable release starting with v4.19.y won't
> work for affected systems due to this patch.

I don't see anyone objecting to the revert in that thread (or any
responses at all.)  I'll queue up a revert for the next round of
releases until this all gets worked out.

thanks,

greg k-h

Re: [PATCH 5.15 05/32] drm/vc4: hdmi: Make sure the device is powered with CEC

[Guenter Roeck]

On 2/6/22 04:09, Greg Kroah-Hartman wrote:
> On Sat, Feb 05, 2022 at 10:41:08AM -0800, Guenter Roeck wrote:
>> Hi Greg,
>>
>> On Sat, Feb 05, 2022 at 06:56:51PM +0100, Greg Kroah-Hartman wrote:
>> [ ... ]
>>>
>>> Yeah, something is really wrong here.  I'm going to go revert this for
>>> now and push out a new set of releases with that fixed.
>>
>> If you pull a release for that, can you possibly revert 9de2b9286a6
>> ("ASoC: mediatek: Check for error clk pointer") as well ? It does not
>> realy fix anything but breaks pretty much all Mediatek systems using
>> the mtk-scpsys driver. I sent a revert request
>> 	https://lore.kernel.org/lkml/20220205014755.699603-1-linux@roeck-us.net/
>> but the it looks like the submitter keeps defending their patch. In the
>> current state, pretty much all stable release starting with v4.19.y won't
>> work for affected systems due to this patch.
> 
> I don't see anyone objecting to the revert in that thread (or any
> responses at all.)  I'll queue up a revert for the next round of
> releases until this all gets worked out.
> 

The discussion isn't easy to find, or at least I only found it
after writing the revert. It is at

https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/

Guenter

[PATCH 5.15 06/32] cgroup-v1: Require capabilities to set release_agent

[Greg Kroah-Hartman]

From: Eric W. Biederman <ebiederm@xmission.com>

commit 24f6008564183aa120d07c03d9289519c2fe02af upstream.

The cgroup release_agent is called with call_usermodehelper.  The function
call_usermodehelper starts the release_agent with a full set fo capabilities.
Therefore require capabilities when setting the release_agaent.

Reported-by: Tabitha Sable <tabitha.c.sable@gmail.com>
Tested-by: Tabitha Sable <tabitha.c.sable@gmail.com>
Fixes: 81a6a5cdd2c5 ("Task Control Groups: automatic userspace notification of idle cgroups")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/cgroup/cgroup-v1.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/kernel/cgroup/cgroup-v1.c
+++ b/kernel/cgroup/cgroup-v1.c
@@ -552,6 +552,14 @@ static ssize_t cgroup_release_agent_writ
 
 	BUILD_BUG_ON(sizeof(cgrp->root->release_agent_path) < PATH_MAX);
 
+	/*
+	 * Release agent gets called with all capabilities,
+	 * require capabilities to set release agent.
+	 */
+	if ((of->file->f_cred->user_ns != &init_user_ns) ||
+	    !capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	cgrp = cgroup_kn_lock_live(of->kn, false);
 	if (!cgrp)
 		return -ENODEV;
@@ -963,6 +971,12 @@ int cgroup1_parse_param(struct fs_contex
 		/* Specifying two release agents is forbidden */
 		if (ctx->release_agent)
 			return invalfc(fc, "release_agent respecified");
+		/*
+		 * Release agent gets called with all capabilities,
+		 * require capabilities to set release agent.
+		 */
+		if ((fc->user_ns != &init_user_ns) || !capable(CAP_SYS_ADMIN))
+			return invalfc(fc, "Setting release_agent not allowed");
 		ctx->release_agent = param->string;
 		param->string = NULL;
 		break;

[PATCH 5.15 07/32] Revert "mm/gup: small refactoring: simplify try_grab_page()"

[Greg Kroah-Hartman]

From: John Hubbard <jhubbard@nvidia.com>

commit c36c04c2e132fc39f6b658bf607aed4425427fd7 upstream.

This reverts commit 54d516b1d62ff8f17cee2da06e5e4706a0d00b8a

That commit did a refactoring that effectively combined fast and slow
gup paths (again).  And that was again incorrect, for two reasons:

 a) Fast gup and slow gup get reference counts on pages in different
    ways and with different goals: see Linus' writeup in commit
    cd1adf1b63a1 ("Revert "mm/gup: remove try_get_page(), call
    try_get_compound_head() directly""), and

 b) try_grab_compound_head() also has a specific check for
    "FOLL_LONGTERM && !is_pinned(page)", that assumes that the caller
    can fall back to slow gup. This resulted in new failures, as
    recently report by Will McVicker [1].

But (a) has problems too, even though they may not have been reported
yet.  So just revert this.

Link: https://lore.kernel.org/r/20220131203504.3458775-1-willmcvicker@google.com [1]
Fixes: 54d516b1d62f ("mm/gup: small refactoring: simplify try_grab_page()")
Reported-and-tested-by: Will McVicker <willmcvicker@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Minchan Kim <minchan@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/gup.c |   35 ++++++++++++++++++++++++++++++-----
 1 file changed, 30 insertions(+), 5 deletions(-)

--- a/mm/gup.c
+++ b/mm/gup.c
@@ -124,8 +124,8 @@ static inline struct page *try_get_compo
  * considered failure, and furthermore, a likely bug in the caller, so a warning
  * is also emitted.
  */
-struct page *try_grab_compound_head(struct page *page,
-				    int refs, unsigned int flags)
+__maybe_unused struct page *try_grab_compound_head(struct page *page,
+						   int refs, unsigned int flags)
 {
 	if (flags & FOLL_GET)
 		return try_get_compound_head(page, refs);
@@ -208,10 +208,35 @@ static void put_compound_head(struct pag
  */
 bool __must_check try_grab_page(struct page *page, unsigned int flags)
 {
-	if (!(flags & (FOLL_GET | FOLL_PIN)))
-		return true;
+	WARN_ON_ONCE((flags & (FOLL_GET | FOLL_PIN)) == (FOLL_GET | FOLL_PIN));
 
-	return try_grab_compound_head(page, 1, flags);
+	if (flags & FOLL_GET)
+		return try_get_page(page);
+	else if (flags & FOLL_PIN) {
+		int refs = 1;
+
+		page = compound_head(page);
+
+		if (WARN_ON_ONCE(page_ref_count(page) <= 0))
+			return false;
+
+		if (hpage_pincount_available(page))
+			hpage_pincount_add(page, 1);
+		else
+			refs = GUP_PIN_COUNTING_BIAS;
+
+		/*
+		 * Similar to try_grab_compound_head(): even if using the
+		 * hpage_pincount_add/_sub() routines, be sure to
+		 * *also* increment the normal page refcount field at least
+		 * once, so that the page really is pinned.
+		 */
+		page_ref_add(page, refs);
+
+		mod_node_page_state(page_pgdat(page), NR_FOLL_PIN_ACQUIRED, 1);
+	}
+
+	return true;
 }
 
 /**

[PATCH 5.15 08/32] ovl: dont fail copy up if no fileattr support on upper

[Greg Kroah-Hartman]

From: Miklos Szeredi <mszeredi@redhat.com>

commit 94fd19752b28aa66c98e7991734af91dfc529f8f upstream.

Christoph Fritz is reporting that failure to copy up fileattr when upper
doesn't support fileattr or xattr results in a regression.

Return success in these failure cases; this reverts overlayfs to the old
behavior.

Add a pr_warn_once() in these cases to still let the user know about the
copy up failures.

Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Fixes: 72db82115d2b ("ovl: copy up sync/noatime fileattr flags")
Cc: <stable@vger.kernel.org> # v5.15
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/overlayfs/copy_up.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -157,7 +157,9 @@ static int ovl_copy_fileattr(struct inod
 	 */
 	if (oldfa.flags & OVL_PROT_FS_FLAGS_MASK) {
 		err = ovl_set_protattr(inode, new->dentry, &oldfa);
-		if (err)
+		if (err == -EPERM)
+			pr_warn_once("copying fileattr: no xattr on upper\n");
+		else if (err)
 			return err;
 	}
 
@@ -167,6 +169,14 @@ static int ovl_copy_fileattr(struct inod
 
 	err = ovl_real_fileattr_get(new, &newfa);
 	if (err) {
+		/*
+		 * Returning an error if upper doesn't support fileattr will
+		 * result in a regression, so revert to the old behavior.
+		 */
+		if (err == -ENOTTY || err == -EINVAL) {
+			pr_warn_once("copying fileattr: no support on upper\n");
+			return 0;
+		}
 		pr_warn("failed to retrieve upper fileattr (%pd2, err=%i)\n",
 			new, err);
 		return err;

[PATCH 5.15 09/32] lockd: fix server crash on reboot of client holding lock

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

commit 6e7f90d163afa8fc2efd6ae318e7c20156a5621f upstream.

I thought I was iterating over the array when actually the iteration is
over the values contained in the array?

Ugh, keep it simple.

Symptoms were a null deference in vfs_lock_file() when an NFSv3 client
that previously held a lock came back up and sent a notify.

Reported-by: Jonathan Woithe <jwoithe@just42.net>
Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/lockd/svcsubs.c |   17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

--- a/fs/lockd/svcsubs.c
+++ b/fs/lockd/svcsubs.c
@@ -179,19 +179,20 @@ nlm_delete_file(struct nlm_file *file)
 static int nlm_unlock_files(struct nlm_file *file)
 {
 	struct file_lock lock;
-	struct file *f;
 
 	lock.fl_type  = F_UNLCK;
 	lock.fl_start = 0;
 	lock.fl_end   = OFFSET_MAX;
-	for (f = file->f_file[0]; f <= file->f_file[1]; f++) {
-		if (f && vfs_lock_file(f, F_SETLK, &lock, NULL) < 0) {
-			pr_warn("lockd: unlock failure in %s:%d\n",
-				__FILE__, __LINE__);
-			return 1;
-		}
-	}
+	if (file->f_file[O_RDONLY] &&
+	    vfs_lock_file(file->f_file[O_RDONLY], F_SETLK, &lock, NULL))
+		goto out_err;
+	if (file->f_file[O_WRONLY] &&
+	    vfs_lock_file(file->f_file[O_WRONLY], F_SETLK, &lock, NULL))
+		goto out_err;
 	return 0;
+out_err:
+	pr_warn("lockd: unlock failure in %s:%d\n", __FILE__, __LINE__);
+	return 1;
 }
 
 /*

[PATCH 5.15 10/32] lockd: fix failure to cleanup client locks

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

commit d19a7af73b5ecaac8168712d18be72b9db166768 upstream.

In my testing, we're sometimes hitting the request->fl_flags & FL_EXISTS
case in posix_lock_inode, presumably just by random luck since we're not
actually initializing fl_flags here.

This probably didn't matter before commit 7f024fcd5c97 ("Keep read and
write fds with each nlm_file") since we wouldn't previously unlock
unless we knew there were locks.

But now it causes lockd to give up on removing more locks.

We could just initialize fl_flags, but really it seems dubious to be
calling vfs_lock_file with random values in some of the fields.

Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: fixed checkpatch.pl nit ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/lockd/svcsubs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/lockd/svcsubs.c
+++ b/fs/lockd/svcsubs.c
@@ -180,6 +180,7 @@ static int nlm_unlock_files(struct nlm_f
 {
 	struct file_lock lock;
 
+	locks_init_lock(&lock);
 	lock.fl_type  = F_UNLCK;
 	lock.fl_start = 0;
 	lock.fl_end   = OFFSET_MAX;

[PATCH 5.15 11/32] net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic

[Greg Kroah-Hartman]

From: Raed Salem <raeds@nvidia.com>

commit de47db0cf7f4a9c555ad204e06baa70b50a70d08 upstream.

IPsec Tunnel mode crypto offload software parser (SWP) setting in data
path currently always set the inner L4 offset regardless of the
encapsulated L4 header type and whether it exists in the first place,
this breaks non TCP/UDP traffic as such.

Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4
header protocol is TCP/UDP.

While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP
flag to address the case where the ip header protocol is IPv6.

Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c |   13 ++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c
@@ -157,11 +157,20 @@ static void mlx5e_ipsec_set_swp(struct s
 	/* Tunnel mode */
 	if (mode == XFRM_MODE_TUNNEL) {
 		eseg->swp_inner_l3_offset = skb_inner_network_offset(skb) / 2;
-		eseg->swp_inner_l4_offset = skb_inner_transport_offset(skb) / 2;
 		if (xo->proto == IPPROTO_IPV6)
 			eseg->swp_flags |= MLX5_ETH_WQE_SWP_INNER_L3_IPV6;
-		if (inner_ip_hdr(skb)->protocol == IPPROTO_UDP)
+
+		switch (xo->inner_ipproto) {
+		case IPPROTO_UDP:
 			eseg->swp_flags |= MLX5_ETH_WQE_SWP_INNER_L4_UDP;
+			fallthrough;
+		case IPPROTO_TCP:
+			/* IP | ESP | IP | [TCP | UDP] */
+			eseg->swp_inner_l4_offset = skb_inner_transport_offset(skb) / 2;
+			break;
+		default:
+			break;
+		}
 		return;
 	}
 

[PATCH 5.15 12/32] net/mlx5: Bridge, take rtnl lock in init error handler

[Greg Kroah-Hartman]

From: Vlad Buslov <vladbu@nvidia.com>

commit 04f8c12f031fcd0ffa0c72822eb665ceb2c872e7 upstream.

The mlx5_esw_bridge_cleanup() is expected to be called with rtnl lock
taken, which is true for mlx5e_rep_bridge_cleanup() function but not for
error handling code in mlx5e_rep_bridge_init(). Add missing rtnl
lock/unlock calls and extend both mlx5_esw_bridge_cleanup() and its dual
function mlx5_esw_bridge_init() with ASSERT_RTNL() to verify the invariant
from now on.

Fixes: 7cd6a54a8285 ("net/mlx5: Bridge, handle FDB events")
Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c |    2 ++
 drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c    |    4 ++++
 2 files changed, 6 insertions(+)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c
@@ -509,7 +509,9 @@ err_register_swdev_blk:
 err_register_swdev:
 	destroy_workqueue(br_offloads->wq);
 err_alloc_wq:
+	rtnl_lock();
 	mlx5_esw_bridge_cleanup(esw);
+	rtnl_unlock();
 }
 
 void mlx5e_rep_bridge_cleanup(struct mlx5e_priv *priv)
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c
@@ -1385,6 +1385,8 @@ struct mlx5_esw_bridge_offloads *mlx5_es
 {
 	struct mlx5_esw_bridge_offloads *br_offloads;
 
+	ASSERT_RTNL();
+
 	br_offloads = kvzalloc(sizeof(*br_offloads), GFP_KERNEL);
 	if (!br_offloads)
 		return ERR_PTR(-ENOMEM);
@@ -1401,6 +1403,8 @@ void mlx5_esw_bridge_cleanup(struct mlx5
 {
 	struct mlx5_esw_bridge_offloads *br_offloads = esw->br_offloads;
 
+	ASSERT_RTNL();
+
 	if (!br_offloads)
 		return;
 

[PATCH 5.15 13/32] net/mlx5: Bridge, ensure dev_name is null-terminated

[Greg Kroah-Hartman]

From: Vlad Buslov <vladbu@nvidia.com>

commit 350d9a823734b5a7e767cddc3bdde5f0bcbb7ff4 upstream.

Even though net_device->name is guaranteed to be null-terminated string of
size<=IFNAMSIZ, the test robot complains that return value of netdev_name()
can be larger:

In file included from include/trace/define_trace.h:102,
                    from drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:113,
                    from drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:12:
   drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h: In function 'trace_event_raw_event_mlx5_esw_bridge_fdb_template':
>> drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:24:29: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation]
      24 |                             strncpy(__entry->dev_name,
         |                             ^~~~~~~~~~~~~~~~~~~~~~~~~~
      25 |                                     netdev_name(fdb->dev),
         |                                     ~~~~~~~~~~~~~~~~~~~~~~
      26 |                                     IFNAMSIZ);
         |                                     ~~~~~~~~~

This is caused by the fact that default value of IFNAMSIZ is 16, while
placeholder value that is returned by netdev_name() for unnamed net devices
is larger than that.

The offending code is in a tracing function that is only called for mlx5
representors, so there is no straightforward way to reproduce the issue but
let's fix it for correctness sake by replacing strncpy() with strscpy() to
ensure that resulting string is always null-terminated.

Fixes: 9724fd5d9c2a ("net/mlx5: Bridge, add tracepoints")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h
@@ -21,7 +21,7 @@ DECLARE_EVENT_CLASS(mlx5_esw_bridge_fdb_
 			    __field(unsigned int, used)
 			    ),
 		    TP_fast_assign(
-			    strncpy(__entry->dev_name,
+			    strscpy(__entry->dev_name,
 				    netdev_name(fdb->dev),
 				    IFNAMSIZ);
 			    memcpy(__entry->addr, fdb->key.addr, ETH_ALEN);

[PATCH 5.15 14/32] net/mlx5e: Fix handling of wrong devices during bond netevent

[Greg Kroah-Hartman]

From: Maor Dickman <maord@nvidia.com>

commit ec41332e02bd0acf1f24206867bb6a02f5877a62 upstream.

Current implementation of bond netevent handler only check if
the handled netdev is VF representor and it missing a check if
the VF representor is on the same phys device of the bond handling
the netevent.

Fix by adding the missing check and optimizing the check if
the netdev is VF representor so it will not access uninitialized
private data and crashes.

BUG: kernel NULL pointer dereference, address: 000000000000036c
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
Workqueue: eth3bond0 bond_mii_monitor [bonding]
RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core]
RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000
RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880
RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008
R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10
R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core]
 mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core]
 mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core]
 raw_notifier_call_chain+0x41/0x60
 call_netdevice_notifiers_info+0x34/0x80
 netdev_lower_state_changed+0x4e/0xa0
 bond_mii_monitor+0x56b/0x640 [bonding]
 process_one_work+0x1b9/0x390
 worker_thread+0x4d/0x3d0
 ? rescuer_thread+0x350/0x350
 kthread+0x124/0x150
 ? set_kthread_struct+0x40/0x40
 ret_from_fork+0x1f/0x30

Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/rep/bond.c |   32 +++++++-----------
 1 file changed, 14 insertions(+), 18 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bond.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bond.c
@@ -183,18 +183,7 @@ void mlx5e_rep_bond_unslave(struct mlx5_
 
 static bool mlx5e_rep_is_lag_netdev(struct net_device *netdev)
 {
-	struct mlx5e_rep_priv *rpriv;
-	struct mlx5e_priv *priv;
-
-	/* A given netdev is not a representor or not a slave of LAG configuration */
-	if (!mlx5e_eswitch_rep(netdev) || !netif_is_lag_port(netdev))
-		return false;
-
-	priv = netdev_priv(netdev);
-	rpriv = priv->ppriv;
-
-	/* Egress acl forward to vport is supported only non-uplink representor */
-	return rpriv->rep->vport != MLX5_VPORT_UPLINK;
+	return netif_is_lag_port(netdev) && mlx5e_eswitch_vf_rep(netdev);
 }
 
 static void mlx5e_rep_changelowerstate_event(struct net_device *netdev, void *ptr)
@@ -210,9 +199,6 @@ static void mlx5e_rep_changelowerstate_e
 	u16 fwd_vport_num;
 	int err;
 
-	if (!mlx5e_rep_is_lag_netdev(netdev))
-		return;
-
 	info = ptr;
 	lag_info = info->lower_state_info;
 	/* This is not an event of a representor becoming active slave */
@@ -266,9 +252,6 @@ static void mlx5e_rep_changeupper_event(
 	struct net_device *lag_dev;
 	struct mlx5e_priv *priv;
 
-	if (!mlx5e_rep_is_lag_netdev(netdev))
-		return;
-
 	priv = netdev_priv(netdev);
 	rpriv = priv->ppriv;
 	lag_dev = info->upper_dev;
@@ -293,6 +276,19 @@ static int mlx5e_rep_esw_bond_netevent(s
 				       unsigned long event, void *ptr)
 {
 	struct net_device *netdev = netdev_notifier_info_to_dev(ptr);
+	struct mlx5e_rep_priv *rpriv;
+	struct mlx5e_rep_bond *bond;
+	struct mlx5e_priv *priv;
+
+	if (!mlx5e_rep_is_lag_netdev(netdev))
+		return NOTIFY_DONE;
+
+	bond = container_of(nb, struct mlx5e_rep_bond, nb);
+	priv = netdev_priv(netdev);
+	rpriv = mlx5_eswitch_get_uplink_priv(priv->mdev->priv.eswitch, REP_ETH);
+	/* Verify VF representor is on the same device of the bond handling the netevent. */
+	if (rpriv->uplink_priv.bond != bond)
+		return NOTIFY_DONE;
 
 	switch (event) {
 	case NETDEV_CHANGELOWERSTATE:

[PATCH 5.15 15/32] net/mlx5: Use del_timer_sync in fw reset flow of halting poll

[Greg Kroah-Hartman]

From: Maher Sanalla <msanalla@nvidia.com>

commit 3c5193a87b0fea090aa3f769d020337662d87b5e upstream.

Substitute del_timer() with del_timer_sync() in fw reset polling
deactivation flow, in order to prevent a race condition which occurs
when del_timer() is called and timer is deactivated while another
process is handling the timer interrupt. A situation that led to
the following call trace:
	RIP: 0010:run_timer_softirq+0x137/0x420
	<IRQ>
	recalibrate_cpu_khz+0x10/0x10
	ktime_get+0x3e/0xa0
	? sched_clock_cpu+0xb/0xc0
	__do_softirq+0xf5/0x2ea
	irq_exit_rcu+0xc1/0xf0
	sysvec_apic_timer_interrupt+0x9e/0xc0
	asm_sysvec_apic_timer_interrupt+0x12/0x20
	</IRQ>

Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
@@ -131,7 +131,7 @@ static void mlx5_stop_sync_reset_poll(st
 {
 	struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
 
-	del_timer(&fw_reset->timer);
+	del_timer_sync(&fw_reset->timer);
 }
 
 static void mlx5_sync_reset_clear_reset_requested(struct mlx5_core_dev *dev, bool poll_health)

[PATCH 5.15 16/32] net/mlx5e: Fix module EEPROM query

[Greg Kroah-Hartman]

From: Gal Pressman <gal@nvidia.com>

commit 4a08a131351e375a2969b98e46df260ed04dcba7 upstream.

When querying the module EEPROM, there was a misusage of the 'offset'
variable vs the 'query.offset' field.
Fix that by always using 'offset' and assigning its value to
'query.offset' right before the mcia register read call.

While at it, the cross-pages read size adjustment was changed to be more
intuitive.

Fixes: e19b0a3474ab ("net/mlx5: Refactor module EEPROM query")
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/port.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -406,23 +406,24 @@ int mlx5_query_module_eeprom(struct mlx5
 
 	switch (module_id) {
 	case MLX5_MODULE_ID_SFP:
-		mlx5_sfp_eeprom_params_set(&query.i2c_address, &query.page, &query.offset);
+		mlx5_sfp_eeprom_params_set(&query.i2c_address, &query.page, &offset);
 		break;
 	case MLX5_MODULE_ID_QSFP:
 	case MLX5_MODULE_ID_QSFP_PLUS:
 	case MLX5_MODULE_ID_QSFP28:
-		mlx5_qsfp_eeprom_params_set(&query.i2c_address, &query.page, &query.offset);
+		mlx5_qsfp_eeprom_params_set(&query.i2c_address, &query.page, &offset);
 		break;
 	default:
 		mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id);
 		return -EINVAL;
 	}
 
-	if (query.offset + size > MLX5_EEPROM_PAGE_LENGTH)
+	if (offset + size > MLX5_EEPROM_PAGE_LENGTH)
 		/* Cross pages read, read until offset 256 in low page */
-		size -= offset + size - MLX5_EEPROM_PAGE_LENGTH;
+		size = MLX5_EEPROM_PAGE_LENGTH - offset;
 
 	query.size = size;
+	query.offset = offset;
 
 	return mlx5_query_mcia(dev, &query, data);
 }

[PATCH 5.15 17/32] net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE

[Greg Kroah-Hartman]

From: Dima Chumak <dchumak@nvidia.com>

commit 55b2ca702cfa744a9eb108915996a2294da47e71 upstream.

Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.

Fixes: d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c
@@ -121,12 +121,13 @@ u32 mlx5_chains_get_nf_ft_chain(struct m
 
 u32 mlx5_chains_get_prio_range(struct mlx5_fs_chains *chains)
 {
-	if (!mlx5_chains_prios_supported(chains))
-		return 1;
-
 	if (mlx5_chains_ignore_flow_level_supported(chains))
 		return UINT_MAX;
 
+	if (!chains->dev->priv.eswitch ||
+	    chains->dev->priv.eswitch->mode != MLX5_ESWITCH_OFFLOADS)
+		return 1;
+
 	/* We should get here only for eswitch case */
 	return FDB_TC_MAX_PRIO;
 }

[PATCH 5.15 18/32] net/mlx5e: Dont treat small ceil values as unlimited in HTB offload

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maximmi@nvidia.com>

commit 736dfe4e68b868829a1e89dfef4a44c1580d4478 upstream.

The hardware spec defines max_average_bw == 0 as "unlimited bandwidth".
max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become
0 when ceil is small, leading to an undesired effect of having no
bandwidth limit.

This commit fixes it by rounding up small values of ceil to 1 Mbit/s.

Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/qos.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en/qos.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/qos.c
@@ -553,7 +553,8 @@ static int mlx5e_htb_convert_rate(struct
 
 static void mlx5e_htb_convert_ceil(struct mlx5e_priv *priv, u64 ceil, u32 *max_average_bw)
 {
-	*max_average_bw = div_u64(ceil, BYTES_IN_MBIT);
+	/* Hardware treats 0 as "unlimited", set at least 1. */
+	*max_average_bw = max_t(u32, div_u64(ceil, BYTES_IN_MBIT), 1);
 
 	qos_dbg(priv->mdev, "Convert: ceil %llu -> max_average_bw %u\n",
 		ceil, *max_average_bw);

[PATCH 5.15 19/32] net/mlx5: Bridge, Fix devlink deadlock on net namespace deletion

[Greg Kroah-Hartman]

From: Roi Dayan <roid@nvidia.com>

commit 880b517691908fb753019b9b27cd082e7617debd upstream.

When changing mode to switchdev, rep bridge init registered to netdevice
notifier holds the devlink lock and then takes pernet_ops_rwsem.
At that time deleting a netns holds pernet_ops_rwsem and then takes
the devlink lock.

Example sequence is:
$ ip netns add foo
$ devlink dev eswitch set pci/0000:00:08.0 mode switchdev &
$ ip netns del foo

deleting netns trace:

[ 1185.365555]  ? devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.368331]  ? mutex_lock_io_nested+0x13f0/0x13f0
[ 1185.370984]  ? xt_find_table+0x40/0x100
[ 1185.373244]  ? __mutex_lock+0x24a/0x15a0
[ 1185.375494]  ? net_generic+0xa0/0x1c0
[ 1185.376844]  ? wait_for_completion_io+0x280/0x280
[ 1185.377767]  ? devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.378686]  devlink_pernet_pre_exit+0x74/0x1c0
[ 1185.379579]  ? devlink_nl_cmd_get_dumpit+0x3a0/0x3a0
[ 1185.380557]  ? xt_find_table+0xda/0x100
[ 1185.381367]  cleanup_net+0x372/0x8e0

changing mode to switchdev trace:

[ 1185.411267]  down_write+0x13a/0x150
[ 1185.412029]  ? down_write_killable+0x180/0x180
[ 1185.413005]  register_netdevice_notifier+0x1e/0x210
[ 1185.414000]  mlx5e_rep_bridge_init+0x181/0x360 [mlx5_core]
[ 1185.415243]  mlx5e_uplink_rep_enable+0x269/0x480 [mlx5_core]
[ 1185.416464]  ? mlx5e_uplink_rep_disable+0x210/0x210 [mlx5_core]
[ 1185.417749]  mlx5e_attach_netdev+0x232/0x400 [mlx5_core]
[ 1185.418906]  mlx5e_netdev_attach_profile+0x15b/0x1e0 [mlx5_core]
[ 1185.420172]  mlx5e_netdev_change_profile+0x15a/0x1d0 [mlx5_core]
[ 1185.421459]  mlx5e_vport_rep_load+0x557/0x780 [mlx5_core]
[ 1185.422624]  ? mlx5e_stats_grp_vport_rep_num_stats+0x10/0x10 [mlx5_core]
[ 1185.424006]  mlx5_esw_offloads_rep_load+0xdb/0x190 [mlx5_core]
[ 1185.425277]  esw_offloads_enable+0xd74/0x14a0 [mlx5_core]

Fix this by registering rep bridges for per net netdev notifier
instead of global one, which operats on the net namespace without holding
the pernet_ops_rwsem.

Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c
@@ -491,7 +491,7 @@ void mlx5e_rep_bridge_init(struct mlx5e_
 	}
 
 	br_offloads->netdev_nb.notifier_call = mlx5_esw_bridge_switchdev_port_event;
-	err = register_netdevice_notifier(&br_offloads->netdev_nb);
+	err = register_netdevice_notifier_net(&init_net, &br_offloads->netdev_nb);
 	if (err) {
 		esw_warn(mdev, "Failed to register bridge offloads netdevice notifier (err=%d)\n",
 			 err);
@@ -526,7 +526,7 @@ void mlx5e_rep_bridge_cleanup(struct mlx
 		return;
 
 	cancel_delayed_work_sync(&br_offloads->update_work);
-	unregister_netdevice_notifier(&br_offloads->netdev_nb);
+	unregister_netdevice_notifier_net(&init_net, &br_offloads->netdev_nb);
 	unregister_switchdev_blocking_notifier(&br_offloads->nb_blk);
 	unregister_switchdev_notifier(&br_offloads->nb);
 	destroy_workqueue(br_offloads->wq);

[PATCH 5.15 20/32] net/mlx5: E-Switch, Fix uninitialized variable modact

[Greg Kroah-Hartman]

From: Maor Dickman <maord@nvidia.com>

commit d8e5883d694bb053b19c4142a2d1f43a34f6fe2c upstream.

The variable modact is not initialized before used in command
modify header allocation which can cause command to fail.

Fix by initializing modact with zeros.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c
@@ -212,7 +212,7 @@ static int
 create_chain_restore(struct fs_chain *chain)
 {
 	struct mlx5_eswitch *esw = chain->chains->dev->priv.eswitch;
-	char modact[MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto)];
+	u8 modact[MLX5_UN_SZ_BYTES(set_add_copy_action_in_auto)] = {};
 	struct mlx5_fs_chains *chains = chain->chains;
 	enum mlx5e_tc_attr_to_reg chain_to_reg;
 	struct mlx5_modify_hdr *mod_hdr;

[PATCH 5.15 21/32] ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

[Greg Kroah-Hartman]

From: Georgi Valkov <gvalkov@abv.bg>

commit 63e4b45c82ed1bde979da7052229a4229ce9cabf upstream.

When rx_buf is allocated we need to account for IPHETH_IP_ALIGN,
which reduces the usable size by 2 bytes. Otherwise we have 1512
bytes usable instead of 1514, and if we receive more than 1512
bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW,
after which the driver malfunctiones and all communication stops.

Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75

Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14")
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/
Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/ipheth.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -121,7 +121,7 @@ static int ipheth_alloc_urbs(struct iphe
 	if (tx_buf == NULL)
 		goto free_rx_urb;
 
-	rx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE,
+	rx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN,
 				    GFP_KERNEL, &rx_urb->transfer_dma);
 	if (rx_buf == NULL)
 		goto free_tx_buf;
@@ -146,7 +146,7 @@ error_nomem:
 
 static void ipheth_free_urbs(struct ipheth_device *iphone)
 {
-	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->rx_buf,
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN, iphone->rx_buf,
 			  iphone->rx_urb->transfer_dma);
 	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->tx_buf,
 			  iphone->tx_urb->transfer_dma);
@@ -317,7 +317,7 @@ static int ipheth_rx_submit(struct iphet
 
 	usb_fill_bulk_urb(dev->rx_urb, udev,
 			  usb_rcvbulkpipe(udev, dev->bulk_in),
-			  dev->rx_buf, IPHETH_BUF_SIZE,
+			  dev->rx_buf, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN,
 			  ipheth_rcvbulk_callback,
 			  dev);
 	dev->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;

[PATCH 5.15 22/32] i40e: Fix reset bw limit when DCB enabled with 1 TC

[Greg Kroah-Hartman]

From: Jedrzej Jagielski <jedrzej.jagielski@intel.com>

commit 3d2504663c41104b4359a15f35670cfa82de1bbf upstream.

There was an AQ error I40E_AQ_RC_EINVAL when trying
to reset bw limit as part of bw allocation setup.
This was caused by trying to reset bw limit with
DCB enabled. Bw limit should not be reset when
DCB is enabled. The code was relying on the pf->flags
to check if DCB is enabled but if only 1 TC is available
this flag will not be set even though DCB is enabled.
Add a check for number of TC and if it is 1
don't try to reset bw limit even if pf->flags shows
DCB as disabled.

Fixes: fa38e30ac73f ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> # Flatten the condition
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5372,7 +5372,15 @@ static int i40e_vsi_configure_bw_alloc(s
 	/* There is no need to reset BW when mqprio mode is on.  */
 	if (pf->flags & I40E_FLAG_TC_MQPRIO)
 		return 0;
-	if (!vsi->mqprio_qopt.qopt.hw && !(pf->flags & I40E_FLAG_DCB_ENABLED)) {
+
+	if (!vsi->mqprio_qopt.qopt.hw) {
+		if (pf->flags & I40E_FLAG_DCB_ENABLED)
+			goto skip_reset;
+
+		if (IS_ENABLED(CONFIG_I40E_DCB) &&
+		    i40e_dcb_hw_get_num_tc(&pf->hw) == 1)
+			goto skip_reset;
+
 		ret = i40e_set_bw_limit(vsi, vsi->seid, 0);
 		if (ret)
 			dev_info(&pf->pdev->dev,
@@ -5380,6 +5388,8 @@ static int i40e_vsi_configure_bw_alloc(s
 				 vsi->seid);
 		return ret;
 	}
+
+skip_reset:
 	memset(&bw_data, 0, sizeof(bw_data));
 	bw_data.tc_valid_bits = enabled_tc;
 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)

[PATCH 5.15 23/32] i40e: Fix reset path while removing the driver

[Greg Kroah-Hartman]

From: Karen Sornek <karen.sornek@intel.com>

commit 6533e558c6505e94c3e0ed4281ed5e31ec985f4d upstream.

Fix the crash in kernel while dereferencing the NULL pointer,
when the driver is unloaded and simultaneously the VSI rings
are being stopped.

The hardware requires 50msec in order to finish RX queues
disable. For this purpose the driver spins in mdelay function
for the operation to be completed.

For example changing number of queues which requires reset would
fail in the following call stack:

1) i40e_prep_for_reset
2) i40e_pf_quiesce_all_vsi
3) i40e_quiesce_vsi
4) i40e_vsi_close
5) i40e_down
6) i40e_vsi_stop_rings
7) i40e_vsi_control_rx -> disable requires the delay of 50msecs
8) continue back in i40e_down function where
   i40e_clean_tx_ring(vsi->tx_rings[i]) is going to crash

When the driver was spinning vsi_release called
i40e_vsi_free_arrays where the vsi->tx_rings resources
were freed and the pointer was set to NULL.

Fixes: 5b6d4a7f20b0 ("i40e: Fix crash during removing i40e driver")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e.h      |    1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c |   19 ++++++++++++++++++-
 2 files changed, 19 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -144,6 +144,7 @@ enum i40e_state_t {
 	__I40E_VIRTCHNL_OP_PENDING,
 	__I40E_RECOVERY_MODE,
 	__I40E_VF_RESETS_DISABLED,	/* disable resets during i40e_remove */
+	__I40E_IN_REMOVE,
 	__I40E_VFS_RELEASING,
 	/* This must be last as it determines the size of the BITMAP */
 	__I40E_STATE_SIZE__,
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10863,6 +10863,9 @@ static void i40e_reset_and_rebuild(struc
 				   bool lock_acquired)
 {
 	int ret;
+
+	if (test_bit(__I40E_IN_REMOVE, pf->state))
+		return;
 	/* Now we wait for GRST to settle out.
 	 * We don't have to delete the VEBs or VSIs from the hw switch
 	 * because the reset will make them disappear.
@@ -12222,6 +12225,8 @@ int i40e_reconfig_rss_queues(struct i40e
 
 		vsi->req_queue_pairs = queue_count;
 		i40e_prep_for_reset(pf);
+		if (test_bit(__I40E_IN_REMOVE, pf->state))
+			return pf->alloc_rss_size;
 
 		pf->alloc_rss_size = new_rss_size;
 
@@ -13048,6 +13053,10 @@ static int i40e_xdp_setup(struct i40e_vs
 	if (need_reset)
 		i40e_prep_for_reset(pf);
 
+	/* VSI shall be deleted in a moment, just return EINVAL */
+	if (test_bit(__I40E_IN_REMOVE, pf->state))
+		return -EINVAL;
+
 	old_prog = xchg(&vsi->xdp_prog, prog);
 
 	if (need_reset) {
@@ -15938,8 +15947,13 @@ static void i40e_remove(struct pci_dev *
 	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(0), 0);
 	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(1), 0);
 
-	while (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
+	/* Grab __I40E_RESET_RECOVERY_PENDING and set __I40E_IN_REMOVE
+	 * flags, once they are set, i40e_rebuild should not be called as
+	 * i40e_prep_for_reset always returns early.
+	 */
+	while (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
 		usleep_range(1000, 2000);
+	set_bit(__I40E_IN_REMOVE, pf->state);
 
 	if (pf->flags & I40E_FLAG_SRIOV_ENABLED) {
 		set_bit(__I40E_VF_RESETS_DISABLED, pf->state);
@@ -16138,6 +16152,9 @@ static void i40e_pci_error_reset_done(st
 {
 	struct i40e_pf *pf = pci_get_drvdata(pdev);
 
+	if (test_bit(__I40E_IN_REMOVE, pf->state))
+		return;
+
 	i40e_reset_and_rebuild(pf, false, false);
 }
 

[PATCH 5.15 24/32] net: amd-xgbe: ensure to reset the tx_timer_active flag

[Greg Kroah-Hartman]

From: Raju Rangoju <Raju.Rangoju@amd.com>

commit 7674b7b559b683478c3832527c59bceb169e701d upstream.

Ensure to reset the tx_timer_active flag in xgbe_stop(),
otherwise a port restart may result in tx timeout due to
uncleared flag.

Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -721,7 +721,9 @@ static void xgbe_stop_timers(struct xgbe
 		if (!channel->tx_ring)
 			break;
 
+		/* Deactivate the Tx timer */
 		del_timer_sync(&channel->tx_timer);
+		channel->tx_timer_active = 0;
 	}
 }
 

[PATCH 5.15 25/32] net: amd-xgbe: Fix skb data length underflow

[Greg Kroah-Hartman]

From: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>

commit 5aac9108a180fc06e28d4e7fb00247ce603b72ee upstream.

There will be BUG_ON() triggered in include/linux/skbuff.h leading to
intermittent kernel panic, when the skb length underflow is detected.

Fix this by dropping the packet if such length underflows are seen
because of inconsistencies in the hardware descriptors.

Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware")
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -2557,6 +2557,14 @@ read_again:
 			buf2_len = xgbe_rx_buf2_len(rdata, packet, len);
 			len += buf2_len;
 
+			if (buf2_len > rdata->rx.buf.dma_len) {
+				/* Hardware inconsistency within the descriptors
+				 * that has resulted in a length underflow.
+				 */
+				error = 1;
+				goto skip_data;
+			}
+
 			if (!skb) {
 				skb = xgbe_create_skb(pdata, napi, rdata,
 						      buf1_len);
@@ -2586,8 +2594,10 @@ skip_data:
 		if (!last || context_next)
 			goto read_again;
 
-		if (!skb)
+		if (!skb || error) {
+			dev_kfree_skb(skb);
 			goto next_packet;
+		}
 
 		/* Be sure we don't exceed the configured MTU */
 		max_len = netdev->mtu + ETH_HLEN;

[PATCH 5.15 26/32] fanotify: Fix stale file descriptor in copy_event_to_user()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit ee12595147ac1fbfb5bcb23837e26dd58d94b15d upstream.

This code calls fd_install() which gives the userspace access to the fd.
Then if copy_info_records_to_user() fails it calls put_unused_fd(fd) but
that will not release it and leads to a stale entry in the file
descriptor table.

Generally you can't trust the fd after a call to fd_install().  The fix
is to delay the fd_install() until everything else has succeeded.

Fortunately it requires CAP_SYS_ADMIN to reach this code so the security
impact is less.

Fixes: f644bc449b37 ("fanotify: fix copy_event_to_user() fid error clean up")
Link: https://lore.kernel.org/r/20220128195656.GA26981@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/notify/fanotify/fanotify_user.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -611,9 +611,6 @@ static ssize_t copy_event_to_user(struct
 	if (fanotify_is_perm_event(event->mask))
 		FANOTIFY_PERM(event)->fd = fd;
 
-	if (f)
-		fd_install(fd, f);
-
 	if (info_mode) {
 		ret = copy_info_records_to_user(event, info, info_mode, pidfd,
 						buf, count);
@@ -621,6 +618,9 @@ static ssize_t copy_event_to_user(struct
 			goto out_close_fd;
 	}
 
+	if (f)
+		fd_install(fd, f);
+
 	return metadata.event_len;
 
 out_close_fd:

[PATCH 5.15 27/32] net: sched: fix use-after-free in tc_new_tfilter()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 04c2a47ffb13c29778e2a14e414ad4cb5a5db4b5 upstream.

Whenever tc_new_tfilter() jumps back to replay: label,
we need to make sure @q and @chain local variables are cleared again,
or risk use-after-free as in [1]

For consistency, apply the same fix in tc_ctl_chain()

BUG: KASAN: use-after-free in mini_qdisc_pair_swap+0x1b9/0x1f0 net/sched/sch_generic.c:1581
Write of size 8 at addr ffff8880985c4b08 by task syz-executor.4/1945

CPU: 0 PID: 1945 Comm: syz-executor.4 Not tainted 5.17.0-rc1-syzkaller-00495-gff58831fa02d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 mini_qdisc_pair_swap+0x1b9/0x1f0 net/sched/sch_generic.c:1581
 tcf_chain_head_change_item net/sched/cls_api.c:372 [inline]
 tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:386
 tcf_chain_tp_insert net/sched/cls_api.c:1657 [inline]
 tcf_chain_tp_insert_unique net/sched/cls_api.c:1707 [inline]
 tc_new_tfilter+0x1e67/0x2350 net/sched/cls_api.c:2086
 rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:5583
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x331/0x810 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmmsg+0x195/0x470 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2647172059
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f2645aa5168 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00007f2647285100 RCX: 00007f2647172059
RDX: 040000000000009f RSI: 00000000200002c0 RDI: 0000000000000006
RBP: 00007f26471cc08d R08: 0000000000000000 R09: 0000000000000000
R10: 9e00000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fffb3f7f02f R14: 00007f2645aa5300 R15: 0000000000022000
 </TASK>

Allocated by task 1944:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:45 [inline]
 set_alloc_info mm/kasan/common.c:436 [inline]
 ____kasan_kmalloc mm/kasan/common.c:515 [inline]
 ____kasan_kmalloc mm/kasan/common.c:474 [inline]
 __kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:524
 kmalloc_node include/linux/slab.h:604 [inline]
 kzalloc_node include/linux/slab.h:726 [inline]
 qdisc_alloc+0xac/0xa10 net/sched/sch_generic.c:941
 qdisc_create.constprop.0+0xce/0x10f0 net/sched/sch_api.c:1211
 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5592
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x331/0x810 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmmsg+0x195/0x470 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Freed by task 3609:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:45
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free+0x130/0x160 mm/kasan/common.c:328
 kasan_slab_free include/linux/kasan.h:236 [inline]
 slab_free_hook mm/slub.c:1728 [inline]
 slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1754
 slab_free mm/slub.c:3509 [inline]
 kfree+0xcb/0x280 mm/slub.c:4562
 rcu_do_batch kernel/rcu/tree.c:2527 [inline]
 rcu_core+0x7b8/0x1540 kernel/rcu/tree.c:2778
 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558

Last potentially related work creation:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 __kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348
 __call_rcu kernel/rcu/tree.c:3026 [inline]
 call_rcu+0xb1/0x740 kernel/rcu/tree.c:3106
 qdisc_put_unlocked+0x6f/0x90 net/sched/sch_generic.c:1109
 tcf_block_release+0x86/0x90 net/sched/cls_api.c:1238
 tc_new_tfilter+0xc0d/0x2350 net/sched/cls_api.c:2148
 rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:5583
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x331/0x810 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmmsg+0x195/0x470 net/socket.c:2553
 __do_sys_sendmmsg net/socket.c:2582 [inline]
 __se_sys_sendmmsg net/socket.c:2579 [inline]
 __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff8880985c4800
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 776 bytes inside of
 1024-byte region [ffff8880985c4800, ffff8880985c4c00)
The buggy address belongs to the page:
page:ffffea0002617000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x985c0
head:ffffea0002617000 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 0000000000000000 dead000000000122 ffff888010c41dc0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 1941, ts 1038999441284, free_ts 1033444432829
 prep_new_page mm/page_alloc.c:2434 [inline]
 get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165
 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389
 alloc_pages+0x1aa/0x310 mm/mempolicy.c:2271
 alloc_slab_page mm/slub.c:1799 [inline]
 allocate_slab mm/slub.c:1944 [inline]
 new_slab+0x28a/0x3b0 mm/slub.c:2004
 ___slab_alloc+0x87c/0xe90 mm/slub.c:3018
 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3105
 slab_alloc_node mm/slub.c:3196 [inline]
 slab_alloc mm/slub.c:3238 [inline]
 __kmalloc+0x2fb/0x340 mm/slub.c:4420
 kmalloc include/linux/slab.h:586 [inline]
 kzalloc include/linux/slab.h:715 [inline]
 __register_sysctl_table+0x112/0x1090 fs/proc/proc_sysctl.c:1335
 neigh_sysctl_register+0x2c8/0x5e0 net/core/neighbour.c:3787
 devinet_sysctl_register+0xb1/0x230 net/ipv4/devinet.c:2618
 inetdev_init+0x286/0x580 net/ipv4/devinet.c:278
 inetdev_event+0xa8a/0x15d0 net/ipv4/devinet.c:1532
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:84
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1919
 call_netdevice_notifiers_extack net/core/dev.c:1931 [inline]
 call_netdevice_notifiers net/core/dev.c:1945 [inline]
 register_netdevice+0x1073/0x1500 net/core/dev.c:9698
 veth_newlink+0x59c/0xa90 drivers/net/veth.c:1722
page last free stack trace:
 reset_page_owner include/linux/page_owner.h:24 [inline]
 free_pages_prepare mm/page_alloc.c:1352 [inline]
 free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404
 free_unref_page_prepare mm/page_alloc.c:3325 [inline]
 free_unref_page+0x19/0x690 mm/page_alloc.c:3404
 release_pages+0x748/0x1220 mm/swap.c:956
 tlb_batch_pages_flush mm/mmu_gather.c:50 [inline]
 tlb_flush_mmu_free mm/mmu_gather.c:243 [inline]
 tlb_flush_mmu+0xe9/0x6b0 mm/mmu_gather.c:250
 zap_pte_range mm/memory.c:1441 [inline]
 zap_pmd_range mm/memory.c:1490 [inline]
 zap_pud_range mm/memory.c:1519 [inline]
 zap_p4d_range mm/memory.c:1540 [inline]
 unmap_page_range+0x1d1d/0x2a30 mm/memory.c:1561
 unmap_single_vma+0x198/0x310 mm/memory.c:1606
 unmap_vmas+0x16b/0x2f0 mm/memory.c:1638
 exit_mmap+0x201/0x670 mm/mmap.c:3178
 __mmput+0x122/0x4b0 kernel/fork.c:1114
 mmput+0x56/0x60 kernel/fork.c:1135
 exit_mm kernel/exit.c:507 [inline]
 do_exit+0xa3c/0x2a30 kernel/exit.c:793
 do_group_exit+0xd2/0x2f0 kernel/exit.c:935
 __do_sys_exit_group kernel/exit.c:946 [inline]
 __se_sys_exit_group kernel/exit.c:944 [inline]
 __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:944
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Memory state around the buggy address:
 ffff8880985c4a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880985c4a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880985c4b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                      ^
 ffff8880985c4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880985c4c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Fixes: 470502de5bdb ("net: sched: unlock rules update API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220131172018.3704490-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/cls_api.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -1945,9 +1945,9 @@ static int tc_new_tfilter(struct sk_buff
 	bool prio_allocate;
 	u32 parent;
 	u32 chain_index;
-	struct Qdisc *q = NULL;
+	struct Qdisc *q;
 	struct tcf_chain_info chain_info;
-	struct tcf_chain *chain = NULL;
+	struct tcf_chain *chain;
 	struct tcf_block *block;
 	struct tcf_proto *tp;
 	unsigned long cl;
@@ -1976,6 +1976,8 @@ replay:
 	tp = NULL;
 	cl = 0;
 	block = NULL;
+	q = NULL;
+	chain = NULL;
 	flags = 0;
 
 	if (prio == 0) {
@@ -2798,8 +2800,8 @@ static int tc_ctl_chain(struct sk_buff *
 	struct tcmsg *t;
 	u32 parent;
 	u32 chain_index;
-	struct Qdisc *q = NULL;
-	struct tcf_chain *chain = NULL;
+	struct Qdisc *q;
+	struct tcf_chain *chain;
 	struct tcf_block *block;
 	unsigned long cl;
 	int err;
@@ -2809,6 +2811,7 @@ static int tc_ctl_chain(struct sk_buff *
 		return -EPERM;
 
 replay:
+	q = NULL;
 	err = nlmsg_parse_deprecated(n, sizeof(*t), tca, TCA_MAX,
 				     rtm_tca_policy, extack);
 	if (err < 0)

[PATCH 5.15 28/32] rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit c6f6f2444bdbe0079e41914a35081530d0409963 upstream.

While looking at one unrelated syzbot bug, I found the replay logic
in __rtnl_newlink() to potentially trigger use-after-free.

It is better to clear master_dev and m_ops inside the loop,
in case we have to replay it.

Fixes: ba7d49b1f0f8 ("rtnetlink: provide api for getting and setting slave info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20220201012106.216495-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/rtnetlink.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -3254,8 +3254,8 @@ static int __rtnl_newlink(struct sk_buff
 	struct nlattr *slave_attr[RTNL_SLAVE_MAX_TYPE + 1];
 	unsigned char name_assign_type = NET_NAME_USER;
 	struct nlattr *linkinfo[IFLA_INFO_MAX + 1];
-	const struct rtnl_link_ops *m_ops = NULL;
-	struct net_device *master_dev = NULL;
+	const struct rtnl_link_ops *m_ops;
+	struct net_device *master_dev;
 	struct net *net = sock_net(skb->sk);
 	const struct rtnl_link_ops *ops;
 	struct nlattr *tb[IFLA_MAX + 1];
@@ -3293,6 +3293,8 @@ replay:
 	else
 		dev = NULL;
 
+	master_dev = NULL;
+	m_ops = NULL;
 	if (dev) {
 		master_dev = netdev_master_upper_dev_get(dev);
 		if (master_dev)

[PATCH 5.15 29/32] cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask()

[Greg Kroah-Hartman]

From: Tianchen Ding <dtcccc@linux.alibaba.com>

commit c80d401c52a2d1baf2a5afeb06f0ffe678e56d23 upstream.

subparts_cpus should be limited as a subset of cpus_allowed, but it is
updated wrongly by using cpumask_andnot(). Use cpumask_and() instead to
fix it.

Fixes: ee8dde0cd2ce ("cpuset: Add new v2 cpuset.sched.partition flag")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/cgroup/cpuset.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -1597,8 +1597,7 @@ static int update_cpumask(struct cpuset
 	 * Make sure that subparts_cpus is a subset of cpus_allowed.
 	 */
 	if (cs->nr_subparts_cpus) {
-		cpumask_andnot(cs->subparts_cpus, cs->subparts_cpus,
-			       cs->cpus_allowed);
+		cpumask_and(cs->subparts_cpus, cs->subparts_cpus, cs->cpus_allowed);
 		cs->nr_subparts_cpus = cpumask_weight(cs->subparts_cpus);
 	}
 	spin_unlock_irq(&callback_lock);

[PATCH 5.15 30/32] e1000e: Handshake with CSME starts from ADL platforms

[Greg Kroah-Hartman]

From: Sasha Neftin <sasha.neftin@intel.com>

commit cad014b7b5a6897d8c4fad13e2888978bfb7a53f upstream.

Handshake with CSME/AMT on none provisioned platforms during S0ix flow
is not supported on TGL platform and can cause to HW unit hang. Update
the handshake with CSME flow to start from the ADL platform.

Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6346,7 +6346,8 @@ static void e1000e_s0ix_entry_flow(struc
 	u32 mac_data;
 	u16 phy_data;
 
-	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID &&
+	    hw->mac.type >= e1000_pch_adp) {
 		/* Request ME configure the device for S0ix */
 		mac_data = er32(H2ME);
 		mac_data |= E1000_H2ME_START_DPG;
@@ -6495,7 +6496,8 @@ static void e1000e_s0ix_exit_flow(struct
 	u16 phy_data;
 	u32 i = 0;
 
-	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID &&
+	    hw->mac.type >= e1000_pch_adp) {
 		/* Request ME unconfigure the device from S0ix */
 		mac_data = er32(H2ME);
 		mac_data &= ~E1000_H2ME_START_DPG;

[PATCH 5.15 31/32] af_packet: fix data-race in packet_setsockopt / packet_setsockopt

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit e42e70ad6ae2ae511a6143d2e8da929366e58bd9 upstream.

When packet_setsockopt( PACKET_FANOUT_DATA ) reads po->fanout,
no lock is held, meaning that another thread can change po->fanout.

Given that po->fanout can only be set once during the socket lifetime
(it is only cleared from fanout_release()), we can use
READ_ONCE()/WRITE_ONCE() to document the race.

BUG: KCSAN: data-race in packet_setsockopt / packet_setsockopt

write to 0xffff88813ae8e300 of 8 bytes by task 14653 on cpu 0:
 fanout_add net/packet/af_packet.c:1791 [inline]
 packet_setsockopt+0x22fe/0x24a0 net/packet/af_packet.c:3931
 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88813ae8e300 of 8 bytes by task 14654 on cpu 1:
 packet_setsockopt+0x691/0x24a0 net/packet/af_packet.c:3935
 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180
 __do_sys_setsockopt net/socket.c:2191 [inline]
 __se_sys_setsockopt net/socket.c:2188 [inline]
 __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x0000000000000000 -> 0xffff888106f8c000

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 14654 Comm: syz-executor.3 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 47dceb8ecdc1 ("packet: add classic BPF fanout mode")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220201022358.330621-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1753,7 +1753,10 @@ static int fanout_add(struct sock *sk, s
 		err = -ENOSPC;
 		if (refcount_read(&match->sk_ref) < match->max_num_members) {
 			__dev_remove_pack(&po->prot_hook);
-			po->fanout = match;
+
+			/* Paired with packet_setsockopt(PACKET_FANOUT_DATA) */
+			WRITE_ONCE(po->fanout, match);
+
 			po->rollover = rollover;
 			rollover = NULL;
 			refcount_set(&match->sk_ref, refcount_read(&match->sk_ref) + 1);
@@ -3906,7 +3909,8 @@ packet_setsockopt(struct socket *sock, i
 	}
 	case PACKET_FANOUT_DATA:
 	{
-		if (!po->fanout)
+		/* Paired with the WRITE_ONCE() in fanout_add() */
+		if (!READ_ONCE(po->fanout))
 			return -EINVAL;
 
 		return fanout_set_data(po, optval, optlen);

[PATCH 5.15 32/32] tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit b67985be400969578d4d4b17299714c0e5d2c07b upstream.

tcp_shift_skb_data() might collapse three packets into a larger one.

P_A, P_B, P_C  -> P_ABC

Historically, it used a single tcp_skb_can_collapse_to(P_A) call,
because it was enough.

In commit 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions"),
this call was replaced by a call to tcp_skb_can_collapse(P_A, P_B)

But the now needed test over P_C has been missed.

This probably broke MPTCP.

Then later, commit 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
added an extra condition to tcp_skb_can_collapse(), but the missing call
from tcp_shift_skb_data() is also breaking TCP zerocopy, because P_A and P_C
might have different skb_zcopy_pure() status.

Fixes: 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions")
Fixes: 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220201184640.756716-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1652,6 +1652,8 @@ static struct sk_buff *tcp_shift_skb_dat
 	    (mss != tcp_skb_seglen(skb)))
 		goto out;
 
+	if (!tcp_skb_can_collapse(prev, skb))
+		goto out;
 	len = skb->len;
 	pcount = tcp_skb_pcount(skb);
 	if (tcp_skb_shift(prev, skb, pcount, len))

Re: [PATCH 5.15 00/32] 5.15.20-rc1 review

[Bagas Sanjaya]

On 04/02/22 16.22, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.20 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
Successfully cross-compiled for arm64 (bcm2711_defconfig from raspberry
pi kernel sources) and ppc64 (ps3_defconfig).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

Re: [PATCH 5.15 00/32] 5.15.20-rc1 review

[Jon Hunter]

On Fri, 04 Feb 2022 10:22:10 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.20 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 06 Feb 2022 09:19:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.20-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.15:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    114 tests:	114 pass, 0 fail

Linux version:	5.15.20-rc1-g61f904d1d627
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.15 00/32] 5.15.20-rc1 review

[Florian Fainelli]

On 2/4/2022 1:22 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.20 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 06 Feb 2022 09:19:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.20-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.15 00/32] 5.15.20-rc1 review

[Shuah Khan]

On 2/4/22 2:22 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.20 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 06 Feb 2022 09:19:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.20-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.15 00/32] 5.15.20-rc1 review

[Guenter Roeck]

On Fri, Feb 04, 2022 at 10:22:10AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.20 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 06 Feb 2022 09:19:05 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 156 pass: 156 fail: 0
Qemu test results:
	total: 488 pass: 488 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.15 00/32] 5.15.20-rc1 review

[Ron Economos]

On 2/4/22 01:22, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.20 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 06 Feb 2022 09:19:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.20-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 5.15 00/32] 5.15.20-rc1 review

[Justin Forbes]

On Fri, Feb 04, 2022 at 10:22:10AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.20 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 06 Feb 2022 09:19:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.20-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested rc1 against the Fedora build system (aarch64, armv7, ppc64le,
s390x, x86_64), and boot tested x86_64. No regressions noted.

Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>

RE: [PATCH 5.15 00/32] 5.15.20-rc1 review

[Fox Chen]

On Fri,  4 Feb 2022 10:22:10 +0100, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.15.20 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 06 Feb 2022 09:19:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.20-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.15.20-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.15 00/32] 5.15.20-rc1 review

[Slade Watkins]

On Fri, Feb 4, 2022, at 4:22 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.20 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 06 Feb 2022 09:19:05 +0000.
> Anything received after that time might be too late.

Hi Greg,
Great news, I was able to compile and boot 5.15.20-rc1 on my x86_64 test system without any errors or regressions.

Tested-by: Slade Watkins <slade@sladewatkins.com>

Thanks,
Slade

Re: [PATCH 5.15 00/32] 5.15.20-rc1 review

[Naresh Kamboju]

On Fri, 4 Feb 2022 at 14:54, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.15.20 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 06 Feb 2022 09:19:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.20-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.15.20-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.15.y
* git commit: 61f904d1d62716d179a70419e910118621910751
* git describe: v5.15.19-34-g61f904d1d627
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.19-34-g61f904d1d627

## Test Regressions (compared to v5.15.19)
No test regressions found.

## Metric regressions (compared to v5.15.19)
No metric regressions found.

## Test fixes (compared to v5.15.19)
No test fixes found.

## Metric fixes (compared to v5.15.19)
No metric fixes found.

## Test result summary
total: 104639, pass: 89348, fail: 1149, skip: 13256, xfail: 886

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 263 total, 261 passed, 2 failed
* arm64: 42 total, 39 passed, 3 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 40 total, 37 passed, 3 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 37 total, 35 passed, 2 failed
* parisc: 14 total, 14 passed, 0 failed
* powerpc: 56 total, 50 passed, 6 failed
* riscv: 28 total, 22 passed, 6 failed
* s390: 22 total, 20 passed, 2 failed
* sh: 26 total, 24 passed, 2 failed
* sparc: 14 total, 14 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 42 total, 39 passed, 3 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.15 00/32] 5.15.20-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Fri, Feb 04, 2022 at 10:22:10AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.20 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 06 Feb 2022 09:19:05 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20220121): 62 configs -> no new failure
arm (gcc version 11.2.1 20220121): 100 configs -> no new failure
arm64 (gcc version 11.2.1 20220121): 3 configs -> no failure
x86_64 (gcc version 11.2.1 20220121): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
mips: Booted on ci20 board. No regression. [3]

[1]. https://openqa.qa.codethink.co.uk/tests/708
[2]. https://openqa.qa.codethink.co.uk/tests/710
[3]. https://openqa.qa.codethink.co.uk/tests/712

Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip