[PATCH AUTOSEL 5.15 01/13] arm64: dts: qcom: c630: disable crypto due to serror

[PATCH AUTOSEL 5.15 01/13] arm64: dts: qcom: c630: disable crypto due to serror

[Sasha Levin]

From: Steev Klimaszewski <steev@kali.org>

[ Upstream commit 382e3e0eb6a83f1cf73d4dfa3448ade1ed721f22 ]

Disable the crypto block due to it causing an SError in qce_start() on
the C630, which happens upon every boot when cryptomanager tests are
enabled.

Signed-off-by: Steev Klimaszewski <steev@kali.org>
[bjorn: Reworked commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211105035235.2392-1-steev@kali.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 617a634ac905..d6a9dbe59a1d 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -793,3 +793,8 @@ &wifi {
 
 	qcom,snoc-host-cap-8bit-quirk;
 };
+
+&crypto {
+	/* FIXME: qce_start triggers an SError */
+	status= "disable";
+};
-- 
2.34.1

[PATCH AUTOSEL 5.15 02/13] HID: logitech-dj: add new lightspeed receiver id

[Sasha Levin]

From: Lucas Zampieri <lzampier@redhat.com>

[ Upstream commit 25666e8ccd952627899b09b68f7c9b68cfeaf028 ]

As of logitech lightspeed receiver fw version 04.02.B0009,
HIDPP_PARAM_DEVICE_INFO is being reported as 0x11.

With patch "HID: logitech-dj: add support for the new lightspeed receiver
iteration", the mouse starts to error out with:
  logitech-djreceiver: unusable device of type UNKNOWN (0x011) connected on
  slot 1
and becomes unusable.

This has been noticed on a Logitech G Pro X Superlight fw MPM 25.01.B0018.

Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Acked-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-dj.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 7106b921b53c..c358778e070b 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -1068,6 +1068,7 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
 		workitem.reports_supported |= STD_KEYBOARD;
 		break;
 	case 0x0f:
+	case 0x11:
 		device_type = "eQUAD Lightspeed 1.2";
 		logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
 		workitem.reports_supported |= STD_KEYBOARD;
-- 
2.34.1

[PATCH AUTOSEL 5.15 03/13] HID: Add support for open wheel and no attachment to T300

[Sasha Levin]

From: Michael Hübner <michaelh.95@t-online.de>

[ Upstream commit 0a5a587501b54e8c6d86960b047d4491fd40dcf2 ]

Different add ons to the wheel base report different models. Having
no wheel mounted to the base and using the open wheel attachment is
added here.

Signed-off-by: Michael Hübner <michaelh.95@t-online.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-thrustmaster.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/hid-thrustmaster.c b/drivers/hid/hid-thrustmaster.c
index 0c92b7f9b8b8..805816be8224 100644
--- a/drivers/hid/hid-thrustmaster.c
+++ b/drivers/hid/hid-thrustmaster.c
@@ -64,7 +64,9 @@ struct tm_wheel_info {
  */
 static const struct tm_wheel_info tm_wheels_infos[] = {
 	{0x0306, 0x0006, "Thrustmaster T150RS"},
+	{0x0200, 0x0005, "Thrustmaster T300RS (Missing Attachment)"},
 	{0x0206, 0x0005, "Thrustmaster T300RS"},
+	{0x0209, 0x0005, "Thrustmaster T300RS (Open Wheel Attachment)"},
 	{0x0204, 0x0005, "Thrustmaster T300 Ferrari Alcantara Edition"},
 	{0x0002, 0x0002, "Thrustmaster T500RS"}
 	//{0x0407, 0x0001, "Thrustmaster TMX"}
-- 
2.34.1

[PATCH AUTOSEL 5.15 04/13] xfrm: fix tunnel model fragmentation behavior

[Sasha Levin]

From: Lina Wang <lina.wang@mediatek.com>

[ Upstream commit 4ff2980b6bd2aa6b4ded3ce3b7c0ccfab29980af ]

in tunnel mode, if outer interface(ipv4) is less, it is easily to let
inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message
is received. When send again, packets are fragmentized with 1280, they
are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().

According to RFC4213 Section3.2.2:
if (IPv4 path MTU - 20) is less than 1280
	if packet is larger than 1280 bytes
		Send ICMPv6 "packet too big" with MTU=1280
                Drop packet
        else
		Encapsulate but do not set the Don't Fragment
                flag in the IPv4 header.  The resulting IPv4
                packet might be fragmented by the IPv4 layer
                on the encapsulator or by some router along
                the IPv4 path.
	endif
else
	if packet is larger than (IPv4 path MTU - 20)
        	Send ICMPv6 "packet too big" with
                MTU = (IPv4 path MTU - 20).
                Drop packet.
        else
                Encapsulate and set the Don't Fragment flag
                in the IPv4 header.
        endif
endif
Packets should be fragmentized with ipv4 outer interface, so change it.

After it is fragemtized with ipv4, there will be double fragmenation.
No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized,
then tunneled with IPv4(No.49& No.50), which obey spec. And received peer
cannot decrypt it rightly.

48              2002::10        2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50)
49   0x0000 (0) 2002::10        2002::11 1304         IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44)
50   0x0000 (0) 2002::10        2002::11 200          ESP (SPI=0x00035000)
51              2002::10        2002::11 180          Echo (ping) request
52   0x56dc     2002::10        2002::11 248          IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)

xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below:
1   0x6206 192.168.1.138   192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2]
2   0x6206 2002::10        2002::11    88   IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50)
3   0x0000 2002::10        2002::11    248  ICMPv6    Echo (ping) request

Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/xfrm6_output.c   | 16 ++++++++++++++++
 net/xfrm/xfrm_interface.c |  5 ++++-
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index d0d280077721..ad07904642ca 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -45,6 +45,19 @@ static int __xfrm6_output_finish(struct net *net, struct sock *sk, struct sk_buf
 	return xfrm_output(sk, skb);
 }
 
+static int xfrm6_noneed_fragment(struct sk_buff *skb)
+{
+	struct frag_hdr *fh;
+	u8 prevhdr = ipv6_hdr(skb)->nexthdr;
+
+	if (prevhdr != NEXTHDR_FRAGMENT)
+		return 0;
+	fh = (struct frag_hdr *)(skb->data + sizeof(struct ipv6hdr));
+	if (fh->nexthdr == NEXTHDR_ESP || fh->nexthdr == NEXTHDR_AUTH)
+		return 1;
+	return 0;
+}
+
 static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 {
 	struct dst_entry *dst = skb_dst(skb);
@@ -73,6 +86,9 @@ static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 		xfrm6_local_rxpmtu(skb, mtu);
 		kfree_skb(skb);
 		return -EMSGSIZE;
+	} else if (toobig && xfrm6_noneed_fragment(skb)) {
+		skb->ignore_df = 1;
+		goto skip_frag;
 	} else if (!skb->ignore_df && toobig && skb->sk) {
 		xfrm_local_error(skb, mtu);
 		kfree_skb(skb);
diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c
index 4e3c62d1ad9e..1e8b26eecb3f 100644
--- a/net/xfrm/xfrm_interface.c
+++ b/net/xfrm/xfrm_interface.c
@@ -304,7 +304,10 @@ xfrmi_xmit2(struct sk_buff *skb, struct net_device *dev, struct flowi *fl)
 			if (mtu < IPV6_MIN_MTU)
 				mtu = IPV6_MIN_MTU;
 
-			icmpv6_ndo_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
+			if (skb->len > 1280)
+				icmpv6_ndo_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
+			else
+				goto xmit;
 		} else {
 			if (!(ip_hdr(skb)->frag_off & htons(IP_DF)))
 				goto xmit;
-- 
2.34.1

[PATCH AUTOSEL 5.15 05/13] ARM: mstar: Select HAVE_ARM_ARCH_TIMER

[Sasha Levin]

From: Daniel Palmer <daniel@0x0f.com>

[ Upstream commit ea49432d184a6a09f84461604b7711a4e9f5ec9c ]

The mstar SoCs have an arch timer but HAVE_ARM_ARCH_TIMER wasn't
selected. If MSC313E_TIMER isn't selected then the kernel gets
stuck at boot because there are no timers available.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20220301104349.3040422-1-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-mstar/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
index cd300eeedc20..0bf4d312bcfd 100644
--- a/arch/arm/mach-mstar/Kconfig
+++ b/arch/arm/mach-mstar/Kconfig
@@ -3,6 +3,7 @@ menuconfig ARCH_MSTARV7
 	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ARM_HEAVY_MB
+	select HAVE_ARM_ARCH_TIMER
 	select MST_IRQ
 	select MSTAR_MSC313_MPLL
 	help
-- 
2.34.1

[PATCH AUTOSEL 5.15 06/13] virtio_console: break out of buf poll on remove

[Sasha Levin]

From: "Michael S. Tsirkin" <mst@redhat.com>

[ Upstream commit 0e7174b9d5877130fec41fb4a16e0c2ee4958d44 ]

A common pattern for device reset is currently:
vdev->config->reset(vdev);
.. cleanup ..

reset prevents new interrupts from arriving and waits for interrupt
handlers to finish.

However if - as is common - the handler queues a work request which is
flushed during the cleanup stage, we have code adding buffers / trying
to get buffers while device is reset. Not good.

This was reproduced by running
	modprobe virtio_console
	modprobe -r virtio_console
in a loop.

Fix this up by calling virtio_break_device + flush before reset.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1786239
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/virtio_console.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 7eaf303a7a86..3adf04766e98 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1956,6 +1956,13 @@ static void virtcons_remove(struct virtio_device *vdev)
 	list_del(&portdev->list);
 	spin_unlock_irq(&pdrvdata_lock);
 
+	/* Device is going away, exit any polling for buffers */
+	virtio_break_device(vdev);
+	if (use_multiport(portdev))
+		flush_work(&portdev->control_work);
+	else
+		flush_work(&portdev->config_work);
+
 	/* Disable interrupts for vqs */
 	vdev->config->reset(vdev);
 	/* Finish up work that's lined up */
-- 
2.34.1

[PATCH AUTOSEL 5.15 07/13] vdpa/mlx5: should verify CTRL_VQ feature exists for MQ

[Sasha Levin]

From: Si-Wei Liu <si-wei.liu@oracle.com>

[ Upstream commit 30c22f3816ffef8aa21a000e93c4ee1402a6ea65 ]

Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit requirements:
"VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ".

There's assumption in the mlx5_vdpa multiqueue code that MQ must come
together with CTRL_VQ. However, there's nowhere in the upper layer to
guarantee this assumption would hold. Were there an untrusted driver
sending down MQ without CTRL_VQ, it would compromise various spots for
e.g. is_index_valid() and is_ctrl_vq_idx(). Although this doesn't end
up with immediate panic or security loophole as of today's code, the
chance for this to be taken advantage of due to future code change is
not zero.

Harden the crispy assumption by failing the set_driver_features() call
when seeing (MQ && !CTRL_VQ). For that end, verify_min_features() is
renamed to verify_driver_features() to reflect the fact that it now does
more than just validate the minimum features. verify_driver_features()
is now used to accommodate various checks against the driver features
for set_driver_features().

Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1642206481-30721-3-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 1afbda216df5..6abbf1a4b06c 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -1857,11 +1857,25 @@ static u64 mlx5_vdpa_get_features(struct vdpa_device *vdev)
 	return ndev->mvdev.mlx_features;
 }
 
-static int verify_min_features(struct mlx5_vdpa_dev *mvdev, u64 features)
+static int verify_driver_features(struct mlx5_vdpa_dev *mvdev, u64 features)
 {
+	/* Minimum features to expect */
 	if (!(features & BIT_ULL(VIRTIO_F_ACCESS_PLATFORM)))
 		return -EOPNOTSUPP;
 
+	/* Double check features combination sent down by the driver.
+	 * Fail invalid features due to absence of the depended feature.
+	 *
+	 * Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit
+	 * requirements: "VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ".
+	 * By failing the invalid features sent down by untrusted drivers,
+	 * we're assured the assumption made upon is_index_valid() and
+	 * is_ctrl_vq_idx() will not be compromised.
+	 */
+	if ((features & (BIT_ULL(VIRTIO_NET_F_MQ) | BIT_ULL(VIRTIO_NET_F_CTRL_VQ))) ==
+            BIT_ULL(VIRTIO_NET_F_MQ))
+		return -EINVAL;
+
 	return 0;
 }
 
@@ -1937,7 +1951,7 @@ static int mlx5_vdpa_set_features(struct vdpa_device *vdev, u64 features)
 
 	print_features(mvdev, features, true);
 
-	err = verify_min_features(mvdev, features);
+	err = verify_driver_features(mvdev, features);
 	if (err)
 		return err;
 
-- 
2.34.1

[PATCH AUTOSEL 5.15 08/13] Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"

[Sasha Levin]

From: Kai Lueke <kailueke@linux.microsoft.com>

[ Upstream commit a3d9001b4e287fc043e5539d03d71a32ab114bcb ]

This reverts commit 68ac0f3810e76a853b5f7b90601a05c3048b8b54 because ID
0 was meant to be used for configuring the policy/state without
matching for a specific interface (e.g., Cilium is affected, see
https://github.com/cilium/cilium/pull/18789 and
https://github.com/cilium/cilium/pull/19019).

Signed-off-by: Kai Lueke <kailueke@linux.microsoft.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_user.c | 21 +++------------------
 1 file changed, 3 insertions(+), 18 deletions(-)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index b10f88822c0d..e13198f7e4e9 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -629,13 +629,8 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
 
 	xfrm_smark_init(attrs, &x->props.smark);
 
-	if (attrs[XFRMA_IF_ID]) {
+	if (attrs[XFRMA_IF_ID])
 		x->if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
-		if (!x->if_id) {
-			err = -EINVAL;
-			goto error;
-		}
-	}
 
 	err = __xfrm_init_state(x, false, attrs[XFRMA_OFFLOAD_DEV]);
 	if (err)
@@ -1431,13 +1426,8 @@ static int xfrm_alloc_userspi(struct sk_buff *skb, struct nlmsghdr *nlh,
 
 	mark = xfrm_mark_get(attrs, &m);
 
-	if (attrs[XFRMA_IF_ID]) {
+	if (attrs[XFRMA_IF_ID])
 		if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
-		if (!if_id) {
-			err = -EINVAL;
-			goto out_noput;
-		}
-	}
 
 	if (p->info.seq) {
 		x = xfrm_find_acq_byseq(net, mark, p->info.seq);
@@ -1750,13 +1740,8 @@ static struct xfrm_policy *xfrm_policy_construct(struct net *net, struct xfrm_us
 
 	xfrm_mark_get(attrs, &xp->mark);
 
-	if (attrs[XFRMA_IF_ID]) {
+	if (attrs[XFRMA_IF_ID])
 		xp->if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
-		if (!xp->if_id) {
-			err = -EINVAL;
-			goto error;
-		}
-	}
 
 	return xp;
  error:
-- 
2.34.1

[PATCH AUTOSEL 5.15 09/13] tools/virtio: fix virtio_test execution

[Sasha Levin]

From: Stefano Garzarella <sgarzare@redhat.com>

[ Upstream commit 32f1b53fe8f03d962423ba81f8e92af5839814da ]

virtio_test hangs on __vring_new_virtqueue() because `vqs_list_lock`
is not initialized.

Let's initialize it in vdev_info_init().

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220118150631.167015-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/virtio/virtio_test.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c
index cb3f29c09aff..23f142af544a 100644
--- a/tools/virtio/virtio_test.c
+++ b/tools/virtio/virtio_test.c
@@ -130,6 +130,7 @@ static void vdev_info_init(struct vdev_info* dev, unsigned long long features)
 	memset(dev, 0, sizeof *dev);
 	dev->vdev.features = features;
 	INIT_LIST_HEAD(&dev->vdev.vqs);
+	spin_lock_init(&dev->vdev.vqs_list_lock);
 	dev->buf_size = 1024;
 	dev->buf = malloc(dev->buf_size);
 	assert(dev->buf);
-- 
2.34.1

[PATCH AUTOSEL 5.15 10/13] ethernet: sun: Free the coherent when failing in probing

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit bb77bd31c281f70ec77c9c4f584950a779e05cf8 ]

When the driver fails to register net device, it should free the DMA
region first, and then do other cleanup.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sun/sunhme.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c
index 62f81b0d14ed..b05ee2e0e305 100644
--- a/drivers/net/ethernet/sun/sunhme.c
+++ b/drivers/net/ethernet/sun/sunhme.c
@@ -3139,7 +3139,7 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
 	if (err) {
 		printk(KERN_ERR "happymeal(PCI): Cannot register net device, "
 		       "aborting.\n");
-		goto err_out_iounmap;
+		goto err_out_free_coherent;
 	}
 
 	pci_set_drvdata(pdev, hp);
@@ -3172,6 +3172,10 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
 
 	return 0;
 
+err_out_free_coherent:
+	dma_free_coherent(hp->dma_dev, PAGE_SIZE,
+			  hp->happy_block, hp->hblock_dvma);
+
 err_out_iounmap:
 	iounmap(hp->gregs);
 
-- 
2.34.1

[PATCH AUTOSEL 5.15 11/13] gpio: Revert regression in sysfs-gpio (gpiolib.c)

[Sasha Levin]

From: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>

[ Upstream commit fc328a7d1fcce263db0b046917a66f3aa6e68719 ]

Some GPIO lines have stopped working after the patch
commit 2ab73c6d8323f ("gpio: Support GPIO controllers without pin-ranges")

And this has supposedly been fixed in the following patches
commit 89ad556b7f96a ("gpio: Avoid using pin ranges with !PINCTRL")
commit 6dbbf84603961 ("gpiolib: Don't free if pin ranges are not defined")

But an erratic behavior where some GPIO lines work while others do not work
has been introduced.

This patch reverts those changes so that the sysfs-gpio interface works
properly again.

Signed-off-by: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index d1b9b721218f..664d1afadf50 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1660,11 +1660,6 @@ static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc)
  */
 int gpiochip_generic_request(struct gpio_chip *gc, unsigned int offset)
 {
-#ifdef CONFIG_PINCTRL
-	if (list_empty(&gc->gpiodev->pin_ranges))
-		return 0;
-#endif
-
 	return pinctrl_gpio_request(gc->gpiodev->base + offset);
 }
 EXPORT_SYMBOL_GPL(gpiochip_generic_request);
@@ -1676,11 +1671,6 @@ EXPORT_SYMBOL_GPL(gpiochip_generic_request);
  */
 void gpiochip_generic_free(struct gpio_chip *gc, unsigned int offset)
 {
-#ifdef CONFIG_PINCTRL
-	if (list_empty(&gc->gpiodev->pin_ranges))
-		return;
-#endif
-
 	pinctrl_gpio_free(gc->gpiodev->base + offset);
 }
 EXPORT_SYMBOL_GPL(gpiochip_generic_free);
-- 
2.34.1

Re: [PATCH AUTOSEL 5.15 11/13] gpio: Revert regression in sysfs-gpio (gpiolib.c)

[Linus Walleij]

On Wed, Mar 16, 2022 at 3:16 PM Sasha Levin <sashal@kernel.org> wrote:

> From: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
>
> [ Upstream commit fc328a7d1fcce263db0b046917a66f3aa6e68719 ]
>
> Some GPIO lines have stopped working after the patch
> commit 2ab73c6d8323f ("gpio: Support GPIO controllers without pin-ranges")
>
> And this has supposedly been fixed in the following patches
> commit 89ad556b7f96a ("gpio: Avoid using pin ranges with !PINCTRL")
> commit 6dbbf84603961 ("gpiolib: Don't free if pin ranges are not defined")
>
> But an erratic behavior where some GPIO lines work while others do not work
> has been introduced.
>
> This patch reverts those changes so that the sysfs-gpio interface works
> properly again.
>
> Signed-off-by: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
> Signed-off-by: Sasha Levin <sashal@kernel.org>


I think you should not apply this for stable, because we will revert the revert.

Yours,
Linus Walleij

[PATCH AUTOSEL 5.15 12/13] spi: Fix invalid sgs value

[Sasha Levin]

From: Biju Das <biju.das.jz@bp.renesas.com>

[ Upstream commit 1a4e53d2fc4f68aa654ad96d13ad042e1a8e8a7d ]

max_seg_size is unsigned int and it can have a value up to 2^32
(for eg:-RZ_DMAC driver sets dma_set_max_seg_size as U32_MAX)
When this value is used in min_t() as an integer type, it becomes
-1 and the value of sgs becomes 0.

Fix this issue by replacing the 'int' data type with 'unsigned int'
in min_t().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220307184843.9994-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index a42b9e8521ce..c7c8d13b2f83 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -942,10 +942,10 @@ int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
 	int i, ret;
 
 	if (vmalloced_buf || kmap_buf) {
-		desc_len = min_t(int, max_seg_size, PAGE_SIZE);
+		desc_len = min_t(unsigned int, max_seg_size, PAGE_SIZE);
 		sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
 	} else if (virt_addr_valid(buf)) {
-		desc_len = min_t(int, max_seg_size, ctlr->max_dma_len);
+		desc_len = min_t(unsigned int, max_seg_size, ctlr->max_dma_len);
 		sgs = DIV_ROUND_UP(len, desc_len);
 	} else {
 		return -EINVAL;
-- 
2.34.1

[PATCH AUTOSEL 5.15 13/13] net:mcf8390: Use platform_get_irq() to get the interrupt

[Sasha Levin]

From: "Minghao Chi (CGEL ZTE)" <chi.minghao@zte.com.cn>

[ Upstream commit 2a760554dcba450d3ad61b32375b50ed6d59a87c ]

It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.

platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.

It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/8390/mcf8390.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/8390/mcf8390.c b/drivers/net/ethernet/8390/mcf8390.c
index 4ad8031ab669..065fdbe66c42 100644
--- a/drivers/net/ethernet/8390/mcf8390.c
+++ b/drivers/net/ethernet/8390/mcf8390.c
@@ -406,12 +406,12 @@ static int mcf8390_init(struct net_device *dev)
 static int mcf8390_probe(struct platform_device *pdev)
 {
 	struct net_device *dev;
-	struct resource *mem, *irq;
+	struct resource *mem;
 	resource_size_t msize;
-	int ret;
+	int ret, irq;
 
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (irq == NULL) {
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
 		dev_err(&pdev->dev, "no IRQ specified?\n");
 		return -ENXIO;
 	}
@@ -434,7 +434,7 @@ static int mcf8390_probe(struct platform_device *pdev)
 	SET_NETDEV_DEV(dev, &pdev->dev);
 	platform_set_drvdata(pdev, dev);
 
-	dev->irq = irq->start;
+	dev->irq = irq;
 	dev->base_addr = mem->start;
 
 	ret = mcf8390_init(dev);
-- 
2.34.1