[PATCH AUTOSEL 4.14 1/8] selinux: use correct type for context length

[PATCH AUTOSEL 4.14 1/8] selinux: use correct type for context length

[Sasha Levin]

From: Christian Göttsche <cgzones@googlemail.com>

[ Upstream commit b97df7c098c531010e445da88d02b7bf7bf59ef6 ]

security_sid_to_context() expects a pointer to an u32 as the address
where to store the length of the computed context.

Reported by sparse:

    security/selinux/xfrm.c:359:39: warning: incorrect type in arg 4
                                    (different signedness)
    security/selinux/xfrm.c:359:39:    expected unsigned int
                                       [usertype] *scontext_len
    security/selinux/xfrm.c:359:39:    got int *

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: wrapped commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/selinux/xfrm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c
index 56e354fcdfc6..5304dd49e054 100644
--- a/security/selinux/xfrm.c
+++ b/security/selinux/xfrm.c
@@ -344,7 +344,7 @@ int selinux_xfrm_state_alloc_acquire(struct xfrm_state *x,
 	int rc;
 	struct xfrm_sec_ctx *ctx;
 	char *ctx_str = NULL;
-	int str_len;
+	u32 str_len;
 
 	if (!polsec)
 		return 0;
-- 
2.34.1

[PATCH AUTOSEL 4.14 2/8] loop: use sysfs_emit() in the sysfs xxx show()

[Sasha Levin]

From: Chaitanya Kulkarni <kch@nvidia.com>

[ Upstream commit b27824d31f09ea7b4a6ba2c1b18bd328df3e8bed ]

sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.

Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute in
loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20220215213310.7264-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/loop.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index c6157ccb9498..4c115c1e9209 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -765,33 +765,33 @@ static ssize_t loop_attr_backing_file_show(struct loop_device *lo, char *buf)
 
 static ssize_t loop_attr_offset_show(struct loop_device *lo, char *buf)
 {
-	return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_offset);
+	return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_offset);
 }
 
 static ssize_t loop_attr_sizelimit_show(struct loop_device *lo, char *buf)
 {
-	return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
+	return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
 }
 
 static ssize_t loop_attr_autoclear_show(struct loop_device *lo, char *buf)
 {
 	int autoclear = (lo->lo_flags & LO_FLAGS_AUTOCLEAR);
 
-	return sprintf(buf, "%s\n", autoclear ? "1" : "0");
+	return sysfs_emit(buf, "%s\n", autoclear ? "1" : "0");
 }
 
 static ssize_t loop_attr_partscan_show(struct loop_device *lo, char *buf)
 {
 	int partscan = (lo->lo_flags & LO_FLAGS_PARTSCAN);
 
-	return sprintf(buf, "%s\n", partscan ? "1" : "0");
+	return sysfs_emit(buf, "%s\n", partscan ? "1" : "0");
 }
 
 static ssize_t loop_attr_dio_show(struct loop_device *lo, char *buf)
 {
 	int dio = (lo->lo_flags & LO_FLAGS_DIRECT_IO);
 
-	return sprintf(buf, "%s\n", dio ? "1" : "0");
+	return sysfs_emit(buf, "%s\n", dio ? "1" : "0");
 }
 
 LOOP_ATTR_RO(backing_file);
-- 
2.34.1

[PATCH AUTOSEL 4.14 3/8] Fix incorrect type in assignment of ipv6 port for audit

[Sasha Levin]

From: Casey Schaufler <casey@schaufler-ca.com>

[ Upstream commit a5cd1ab7ab679d252a6d2f483eee7d45ebf2040c ]

Remove inappropriate use of ntohs() and assign the
port value directly.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/smack/smack_lsm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index a0e1b99212b2..fe070669dc18 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -2563,7 +2563,7 @@ static int smk_ipv6_check(struct smack_known *subject,
 #ifdef CONFIG_AUDIT
 	smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
 	ad.a.u.net->family = PF_INET6;
-	ad.a.u.net->dport = ntohs(address->sin6_port);
+	ad.a.u.net->dport = address->sin6_port;
 	if (act == SMK_RECEIVING)
 		ad.a.u.net->v6info.saddr = address->sin6_addr;
 	else
-- 
2.34.1

[PATCH AUTOSEL 4.14 4/8] irqchip/nvic: Release nvic_base upon failure

[Sasha Levin]

From: "Souptick Joarder (HPE)" <jrdr.linux@gmail.com>

[ Upstream commit e414c25e3399b2b3d7337dc47abccab5c71b7c8f ]

smatch warning was reported as below ->

smatch warnings:
drivers/irqchip/irq-nvic.c:131 nvic_of_init()
warn: 'nvic_base' not released on lines: 97.

Release nvic_base upon failure.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220218163303.33344-1-jrdr.linux@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-nvic.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/irqchip/irq-nvic.c b/drivers/irqchip/irq-nvic.c
index 9694529b709d..330beb62d015 100644
--- a/drivers/irqchip/irq-nvic.c
+++ b/drivers/irqchip/irq-nvic.c
@@ -108,6 +108,7 @@ static int __init nvic_of_init(struct device_node *node,
 
 	if (!nvic_irq_domain) {
 		pr_warn("Failed to allocate irq domain\n");
+		iounmap(nvic_base);
 		return -ENOMEM;
 	}
 
@@ -117,6 +118,7 @@ static int __init nvic_of_init(struct device_node *node,
 	if (ret) {
 		pr_warn("Failed to allocate irq chips\n");
 		irq_domain_remove(nvic_irq_domain);
+		iounmap(nvic_base);
 		return ret;
 	}
 
-- 
2.34.1

[PATCH AUTOSEL 4.14 5/8] ACPICA: Avoid walking the ACPI Namespace if it is not there

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 0c9992315e738e7d6e927ef36839a466b080dba6 ]

ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc

Prevent acpi_ns_walk_namespace() from crashing when called with
start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been
instantiated yet and acpi_gbl_root_node is NULL.

For instance, this can happen if the kernel is run with "acpi=off"
in the command line.

Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/nswalk.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index 6b6e6f498cff..129fc61f14c4 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -203,6 +203,9 @@ acpi_ns_walk_namespace(acpi_object_type type,
 
 	if (start_node == ACPI_ROOT_OBJECT) {
 		start_node = acpi_gbl_root_node;
+		if (!start_node) {
+			return_ACPI_STATUS(AE_NO_NAMESPACE);
+		}
 	}
 
 	/* Null child means "get first node" */
-- 
2.34.1

[PATCH AUTOSEL 4.14 6/8] ACPI/APEI: Limit printable size of BERT table data

[Sasha Levin]

From: Darren Hart <darren@os.amperecomputing.com>

[ Upstream commit 3f8dec116210ca649163574ed5f8df1e3b837d07 ]

Platforms with large BERT table data can trigger soft lockup errors
while attempting to print the entire BERT table data to the console at
boot:

  watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1]

Observed on Ampere Altra systems with a single BERT record of ~250KB.

The original bert driver appears to have assumed relatively small table
data. Since it is impractical to reassemble large table data from
interwoven console messages, and the table data is available in

  /sys/firmware/acpi/tables/data/BERT

limit the size for tables printed to the console to 1024 (for no reason
other than it seemed like a good place to kick off the discussion, would
appreciate feedback from existing users in terms of what size would
maintain their current usage model).

Alternatively, we could make printing a CONFIG option, use the
bert_disable boot arg (or something similar), or use a debug log level.
However, all those solutions require extra steps or change the existing
behavior for small table data. Limiting the size preserves existing
behavior on existing platforms with small table data, and eliminates the
soft lockups for platforms with large table data, while still making it
available.

Signed-off-by: Darren Hart <darren@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/apei/bert.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/apei/bert.c b/drivers/acpi/apei/bert.c
index 12771fcf0417..19b96fde77c4 100644
--- a/drivers/acpi/apei/bert.c
+++ b/drivers/acpi/apei/bert.c
@@ -31,6 +31,7 @@
 
 #undef pr_fmt
 #define pr_fmt(fmt) "BERT: " fmt
+#define ACPI_BERT_PRINT_MAX_LEN 1024
 
 static int bert_disable;
 
@@ -59,8 +60,11 @@ static void __init bert_print_all(struct acpi_bert_region *region,
 		}
 
 		pr_info_once("Error records from previous boot:\n");
-
-		cper_estatus_print(KERN_INFO HW_ERR, estatus);
+		if (region_len < ACPI_BERT_PRINT_MAX_LEN)
+			cper_estatus_print(KERN_INFO HW_ERR, estatus);
+		else
+			pr_info_once("Max print length exceeded, table data is available at:\n"
+				     "/sys/firmware/acpi/tables/data/BERT");
 
 		/*
 		 * Because the boot error source is "one-time polled" type,
-- 
2.34.1

[PATCH AUTOSEL 4.14 7/8] PM: core: keep irq flags in device_pm_check_callbacks()

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 524bb1da785a7ae43dd413cd392b5071c6c367f8 ]

The function device_pm_check_callbacks() can be called under the spin
lock (in the reported case it happens from genpd_add_device() ->
dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes.

However this function uncoditionally uses spin_lock_irq() /
spin_unlock_irq(), thus not preserving the CPU flags. Use the
irqsave/irqrestore instead.

The backtrace for the reference:
[    2.752010] ------------[ cut here ]------------
[    2.756769] raw_local_irq_restore() called with IRQs enabled
[    2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50
[    2.772338] Modules linked in:
[    2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S                5.17.0-rc6-00384-ge330d0d82eff-dirty #684
[    2.781384] Freeing initrd memory: 46024K
[    2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.785841] pc : warn_bogus_irq_restore+0x34/0x50
[    2.785844] lr : warn_bogus_irq_restore+0x34/0x50
[    2.785846] sp : ffff80000805b7d0
[    2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002
[    2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800
[    2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00
[    2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff
[    2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7
[    2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8
[    2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0
[    2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0
[    2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[    2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000
[    2.889774] Call trace:
[    2.892290]  warn_bogus_irq_restore+0x34/0x50
[    2.896770]  _raw_spin_unlock_irqrestore+0x94/0xa0
[    2.901690]  genpd_unlock_spin+0x20/0x30
[    2.905724]  genpd_add_device+0x100/0x2d0
[    2.909850]  __genpd_dev_pm_attach+0xa8/0x23c
[    2.914329]  genpd_dev_pm_attach_by_id+0xc4/0x190
[    2.919167]  genpd_dev_pm_attach_by_name+0x3c/0xd0
[    2.924086]  dev_pm_domain_attach_by_name+0x24/0x30
[    2.929102]  psci_dt_attach_cpu+0x24/0x90
[    2.933230]  psci_cpuidle_probe+0x2d4/0x46c
[    2.937534]  platform_probe+0x68/0xe0
[    2.941304]  really_probe.part.0+0x9c/0x2fc
[    2.945605]  __driver_probe_device+0x98/0x144
[    2.950085]  driver_probe_device+0x44/0x15c
[    2.954385]  __device_attach_driver+0xb8/0x120
[    2.958950]  bus_for_each_drv+0x78/0xd0
[    2.962896]  __device_attach+0xd8/0x180
[    2.966843]  device_initial_probe+0x14/0x20
[    2.971144]  bus_probe_device+0x9c/0xa4
[    2.975092]  device_add+0x380/0x88c
[    2.978679]  platform_device_add+0x114/0x234
[    2.983067]  platform_device_register_full+0x100/0x190
[    2.988344]  psci_idle_init+0x6c/0xb0
[    2.992113]  do_one_initcall+0x74/0x3a0
[    2.996060]  kernel_init_freeable+0x2fc/0x384
[    3.000543]  kernel_init+0x28/0x130
[    3.004132]  ret_from_fork+0x10/0x20
[    3.007817] irq event stamp: 319826
[    3.011404] hardirqs last  enabled at (319825): [<ffffd40e7eda0268>] __up_console_sem+0x78/0x84
[    3.020332] hardirqs last disabled at (319826): [<ffffd40e7fd6d9d8>] el1_dbg+0x24/0x8c
[    3.028458] softirqs last  enabled at (318312): [<ffffd40e7ec90410>] _stext+0x410/0x588
[    3.036678] softirqs last disabled at (318299): [<ffffd40e7ed1bf68>] __irq_exit_rcu+0x158/0x174
[    3.045607] ---[ end trace 0000000000000000 ]---

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/power/main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 4fd49d55bc3e..3d51e457a4cd 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -1901,7 +1901,9 @@ static bool pm_ops_is_empty(const struct dev_pm_ops *ops)
 
 void device_pm_check_callbacks(struct device *dev)
 {
-	spin_lock_irq(&dev->power.lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->power.lock, flags);
 	dev->power.no_pm_callbacks =
 		(!dev->bus || (pm_ops_is_empty(dev->bus->pm) &&
 		 !dev->bus->suspend && !dev->bus->resume)) &&
@@ -1911,5 +1913,5 @@ void device_pm_check_callbacks(struct device *dev)
 		(!dev->pm_domain || pm_ops_is_empty(&dev->pm_domain->ops)) &&
 		(!dev->driver || (pm_ops_is_empty(dev->driver->pm) &&
 		 !dev->driver->suspend && !dev->driver->resume));
-	spin_unlock_irq(&dev->power.lock);
+	spin_unlock_irqrestore(&dev->power.lock, flags);
 }
-- 
2.34.1

[PATCH AUTOSEL 4.14 8/8] spi: tegra20: Use of_device_get_match_data()

[Sasha Levin]

From: Minghao Chi <chi.minghao@zte.com.cn>

[ Upstream commit c9839acfcbe20ce43d363c2a9d0772472d9921c0 ]

Use of_device_get_match_data() to simplify the code.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220315023138.2118293-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-tegra20-slink.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 1548f7b738c1..b520525df246 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1016,14 +1016,8 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	struct resource		*r;
 	int ret, spi_irq;
 	const struct tegra_slink_chip_data *cdata = NULL;
-	const struct of_device_id *match;
 
-	match = of_match_device(tegra_slink_of_match, &pdev->dev);
-	if (!match) {
-		dev_err(&pdev->dev, "Error: No device match found\n");
-		return -ENODEV;
-	}
-	cdata = match->data;
+	cdata = of_device_get_match_data(&pdev->dev);
 
 	master = spi_alloc_master(&pdev->dev, sizeof(*tspi));
 	if (!master) {
-- 
2.34.1