[PATCH AUTOSEL 5.17 56/60] Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs"

[Sasha Levin <sashal@kernel.org>]

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit f4fd559de3434c44bed1d2912bd0c75cfa42898b ]

This reverts commit 830aa6f29f07a4e2f1a947dfa72b3ccddb46dd21.

This is part of a revert of the following commits:

  11ed8b8624b8 ("PCI: brcmstb: Do not turn off WOL regulators on suspend")
  93e41f3fca3d ("PCI: brcmstb: Add control of subdevice voltage regulators")
  67211aadcb4b ("PCI: brcmstb: Add mechanism to turn on subdev regulators")
  830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup() into two funcs")

Cyril reported that 830aa6f29f07 ("PCI: brcmstb: Split brcm_pcie_setup()
into two funcs"), which appeared in v5.17-rc1, broke booting on the
Raspberry Pi Compute Module 4.  Apparently 830aa6f29f07 panics with an
Asynchronous SError Interrupt, and after further commits here is a black
screen on HDMI and no output on the serial console.

This does not seem to affect the Raspberry Pi 4 B.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215925
Link: https://lore.kernel.org/r/20220511201856.808690-5-helgaas@kernel.org
Reported-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-brcmstb.c | 65 +++++++++++----------------
 1 file changed, 26 insertions(+), 39 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 0e8346114a8d..e61058e13818 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -926,9 +926,16 @@ static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
 
 static int brcm_pcie_setup(struct brcm_pcie *pcie)
 {
+	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
 	u64 rc_bar2_offset, rc_bar2_size;
 	void __iomem *base = pcie->base;
-	int ret, memc;
+	struct device *dev = pcie->dev;
+	struct resource_entry *entry;
+	bool ssc_good = false;
+	struct resource *res;
+	int num_out_wins = 0;
+	u16 nlw, cls, lnksta;
+	int i, ret, memc;
 	u32 tmp, burst, aspm_support;
 
 	/* Reset the bridge */
@@ -1018,40 +1025,6 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	if (pcie->gen)
 		brcm_pcie_set_gen(pcie, pcie->gen);
 
-	/* Don't advertise L0s capability if 'aspm-no-l0s' */
-	aspm_support = PCIE_LINK_STATE_L1;
-	if (!of_property_read_bool(pcie->np, "aspm-no-l0s"))
-		aspm_support |= PCIE_LINK_STATE_L0S;
-	tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
-	u32p_replace_bits(&tmp, aspm_support,
-		PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
-	writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
-
-	/*
-	 * For config space accesses on the RC, show the right class for
-	 * a PCIe-PCIe bridge (the default setting is to be EP mode).
-	 */
-	tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3);
-	u32p_replace_bits(&tmp, 0x060400,
-			  PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK);
-	writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3);
-
-	return 0;
-}
-
-static int brcm_pcie_linkup(struct brcm_pcie *pcie)
-{
-	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
-	struct device *dev = pcie->dev;
-	void __iomem *base = pcie->base;
-	struct resource_entry *entry;
-	struct resource *res;
-	int num_out_wins = 0;
-	u16 nlw, cls, lnksta;
-	bool ssc_good = false;
-	u32 tmp;
-	int ret, i;
-
 	/* Unassert the fundamental reset */
 	pcie->perst_set(pcie, 0);
 
@@ -1102,6 +1075,24 @@ static int brcm_pcie_linkup(struct brcm_pcie *pcie)
 		num_out_wins++;
 	}
 
+	/* Don't advertise L0s capability if 'aspm-no-l0s' */
+	aspm_support = PCIE_LINK_STATE_L1;
+	if (!of_property_read_bool(pcie->np, "aspm-no-l0s"))
+		aspm_support |= PCIE_LINK_STATE_L0S;
+	tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
+	u32p_replace_bits(&tmp, aspm_support,
+		PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
+	writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
+
+	/*
+	 * For config space accesses on the RC, show the right class for
+	 * a PCIe-PCIe bridge (the default setting is to be EP mode).
+	 */
+	tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3);
+	u32p_replace_bits(&tmp, 0x060400,
+			  PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK);
+	writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3);
+
 	if (pcie->ssc) {
 		ret = brcm_pcie_set_ssc(pcie);
 		if (ret == 0)
@@ -1290,10 +1281,6 @@ static int brcm_pcie_resume(struct device *dev)
 	if (ret)
 		goto err_reset;
 
-	ret = brcm_pcie_linkup(pcie);
-	if (ret)
-		goto err_reset;
-
 	if (pcie->msi)
 		brcm_msi_set_regs(pcie->msi);
 
-- 
2.35.1