[for-next][PATCH 1/2] ktest.pl minconfig: Unset configs instead of just removing them

[for-next][PATCH 1/2] ktest.pl minconfig: Unset configs instead of just removing them

[Steven Rostedt]

From: Steven Rostedt <rostedt@goodmis.org>

After a full run of a make_min_config test, I noticed there were a lot of
CONFIGs still enabled that really should not be. Looking at them, I
noticed they were all defined as "default y". The issue is that the test
simple removes the config and re-runs make oldconfig, which enables it
again because it is set to default 'y'. Instead, explicitly disable the
config with writing "# CONFIG_FOO is not set" to the file to keep it from
being set again.

With this change, one of my box's minconfigs went from 768 configs set,
down to 521 configs set.

Link: https://lkml.kernel.org/r/20221202115936.016fce23@gandalf.local.home

Cc: stable@vger.kernel.org
Fixes: 0a05c769a9de5 ("ktest: Added config_bisect test type")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
---
 tools/testing/ktest/ktest.pl | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 09d1578f9d66..d391bf7abeee 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -3768,9 +3768,10 @@ sub test_this_config {
     # .config to make sure it is missing the config that
     # we had before
     my %configs = %min_configs;
-    delete $configs{$config};
+    $configs{$config} = "# $config is not set";
     make_new_config ((values %configs), (values %keep_configs));
     make_oldconfig;
+    delete $configs{$config};
     undef %configs;
     assign_configs \%configs, $output_config;
 
-- 
2.35.1

[for-next][PATCH 2/2] kest.pl: Fix grub2 menu handling for rebooting

[Steven Rostedt]

From: Steven Rostedt <rostedt@goodmis.org>

grub2 has submenus where to use grub-reboot, it requires:

  grub-reboot X>Y

where X is the main index and Y is the submenu. Thus if you have:

menuentry 'Debian GNU/Linux' --class debian --class gnu-linux ...
	[...]
}
submenu 'Advanced options for Debian GNU/Linux' $menuentry_id_option ...
        menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64' --class debian --class gnu-linux ...
                [...]
        }
        menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64 (recovery mode)' --class debian --class gnu-linux ...
		[...]
        }
        menuentry 'Debian GNU/Linux, with Linux test' --class debian --class gnu-linux ...
                [...]
        }

And wanted to boot to the "Linux test" kernel, you need to run:

 # grub-reboot 1>2

As 1 is the second top menu (the submenu) and 2 is the third of the sub
menu entries.

Have the grub.cfg parsing for grub2 handle such cases.

Cc: stable@vger.kernel.org
Fixes: a15ba91361d46 ("ktest: Add support for grub2")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 tools/testing/ktest/ktest.pl | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index d391bf7abeee..1737c59e4ff6 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -1963,7 +1963,7 @@ sub run_scp_mod {
 
 sub _get_grub_index {
 
-    my ($command, $target, $skip) = @_;
+    my ($command, $target, $skip, $submenu) = @_;
 
     return if (defined($grub_number) && defined($last_grub_menu) &&
 	$last_grub_menu eq $grub_menu && defined($last_machine) &&
@@ -1980,11 +1980,16 @@ sub _get_grub_index {
 
     my $found = 0;
 
+    my $submenu_number = 0;
+
     while (<IN>) {
 	if (/$target/) {
 	    $grub_number++;
 	    $found = 1;
 	    last;
+	} elsif (defined($submenu) && /$submenu/) {
+		$submenu_number++;
+		$grub_number = -1;
 	} elsif (/$skip/) {
 	    $grub_number++;
 	}
@@ -1993,6 +1998,9 @@ sub _get_grub_index {
 
     dodie "Could not find '$grub_menu' through $command on $machine"
 	if (!$found);
+    if ($submenu_number > 0) {
+	$grub_number = "$submenu_number>$grub_number";
+    }
     doprint "$grub_number\n";
     $last_grub_menu = $grub_menu;
     $last_machine = $machine;
@@ -2003,6 +2011,7 @@ sub get_grub_index {
     my $command;
     my $target;
     my $skip;
+    my $submenu;
     my $grub_menu_qt;
 
     if ($reboot_type !~ /^grub/) {
@@ -2017,8 +2026,9 @@ sub get_grub_index {
 	$skip = '^\s*title\s';
     } elsif ($reboot_type eq "grub2") {
 	$command = "cat $grub_file";
-	$target = '^menuentry.*' . $grub_menu_qt;
-	$skip = '^menuentry\s|^submenu\s';
+	$target = '^\s*menuentry.*' . $grub_menu_qt;
+	$skip = '^\s*menuentry';
+	$submenu = '^\s*submenu\s';
     } elsif ($reboot_type eq "grub2bls") {
 	$command = $grub_bls_get;
 	$target = '^title=.*' . $grub_menu_qt;
@@ -2027,7 +2037,7 @@ sub get_grub_index {
 	return;
     }
 
-    _get_grub_index($command, $target, $skip);
+    _get_grub_index($command, $target, $skip, $submenu);
 }
 
 sub wait_for_input {
@@ -2090,7 +2100,7 @@ sub reboot_to {
     if ($reboot_type eq "grub") {
 	run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
     } elsif (($reboot_type eq "grub2") or ($reboot_type eq "grub2bls")) {
-	run_ssh "$grub_reboot $grub_number";
+	run_ssh "$grub_reboot \"'$grub_number'\"";
     } elsif ($reboot_type eq "syslinux") {
 	run_ssh "$syslinux --once \\\"$syslinux_label\\\" $syslinux_path";
     } elsif (defined $reboot_script) {
-- 
2.35.1