[PATCH AUTOSEL 5.4 1/7] phy: sun4i-usb: Add support for the H616 USB PHY

[PATCH AUTOSEL 5.4 1/7] phy: sun4i-usb: Add support for the H616 USB PHY

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 0f607406525d25019dd9c498bcc0b42734fc59d5 ]

The USB PHY used in the Allwinner H616 SoC inherits some traits from its
various predecessors: it has four full PHYs like the H3, needs some
extra bits to be set like the H6, and puts SIDDQ on a different bit like
the A100. Plus it needs this weird PHY2 quirk.

Name all those properties in a new config struct and assign a new
compatible name to it.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221031111358.3387297-5-andre.przywara@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/allwinner/phy-sun4i-usb.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index e5842e48a5e0..22938be176e7 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -973,6 +973,17 @@ static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
 	.missing_phys = BIT(1) | BIT(2),
 };
 
+static const struct sun4i_usb_phy_cfg sun50i_h616_cfg = {
+	.num_phys = 4,
+	.type = sun50i_h6_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A33,
+	.dedicated_clocks = true,
+	.phy0_dual_route = true,
+	.hci_phy_ctl_clear = PHY_CTL_SIDDQ,
+	.needs_phy2_siddq = true,
+};
+
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
 	{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
@@ -987,6 +998,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun50i-a64-usb-phy",
 	  .data = &sun50i_a64_cfg},
 	{ .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
+	{ .compatible = "allwinner,sun50i-h616-usb-phy", .data = &sun50i_h616_cfg },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
-- 
2.35.1

[PATCH AUTOSEL 5.4 2/7] objtool: Fix SEGFAULT

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit efb11fdb3e1a9f694fa12b70b21e69e55ec59c36 ]

find_insn() will return NULL in case of failure. Check insn in order
to avoid a kernel Oops for NULL pointer dereference.

Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114175754.1131267-9-sv@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/check.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index bae6b261481d..ccf5580442d2 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -162,7 +162,7 @@ static bool __dead_end_function(struct objtool_file *file, struct symbol *func,
 		return false;
 
 	insn = find_insn(file, func->sec, func->offset);
-	if (!insn->func)
+	if (!insn || !insn->func)
 		return false;
 
 	func_for_each_insn_all(file, func, insn) {
-- 
2.35.1

[PATCH AUTOSEL 5.4 3/7] powerpc/rtas: avoid device tree lookups in rtas_os_term()

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit ed2213bfb192ab51f09f12e9b49b5d482c6493f3 ]

rtas_os_term() is called during panic. Its behavior depends on a couple
of conditions in the /rtas node of the device tree, the traversal of
which entails locking and local IRQ state changes. If the kernel panics
while devtree_lock is held, rtas_os_term() as currently written could
hang.

Instead of discovering the relevant characteristics at panic time,
cache them in file-static variables at boot. Note the lookup for
"ibm,extended-os-term" is converted to of_property_read_bool() since it
is a boolean property, not an RTAS function token.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Incorporate suggested change from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/rtas.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 35e246e39705..8ec69ea81fb4 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -714,6 +714,7 @@ void __noreturn rtas_halt(void)
 
 /* Must be in the RMO region, so we place it here */
 static char rtas_os_term_buf[2048];
+static s32 ibm_os_term_token = RTAS_UNKNOWN_SERVICE;
 
 void rtas_os_term(char *str)
 {
@@ -725,14 +726,13 @@ void rtas_os_term(char *str)
 	 * this property may terminate the partition which we want to avoid
 	 * since it interferes with panic_timeout.
 	 */
-	if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term") ||
-	    RTAS_UNKNOWN_SERVICE == rtas_token("ibm,extended-os-term"))
+	if (ibm_os_term_token == RTAS_UNKNOWN_SERVICE)
 		return;
 
 	snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str);
 
 	do {
-		status = rtas_call(rtas_token("ibm,os-term"), 1, 1, NULL,
+		status = rtas_call(ibm_os_term_token, 1, 1, NULL,
 				   __pa(rtas_os_term_buf));
 	} while (rtas_busy_delay(status));
 
@@ -1215,6 +1215,13 @@ void __init rtas_initialize(void)
 	no_entry = of_property_read_u32(rtas.dev, "linux,rtas-entry", &entry);
 	rtas.entry = no_entry ? rtas.base : entry;
 
+	/*
+	 * Discover these now to avoid device tree lookups in the
+	 * panic path.
+	 */
+	if (of_property_read_bool(rtas.dev, "ibm,extended-os-term"))
+		ibm_os_term_token = rtas_token("ibm,os-term");
+
 	/* If RTAS was found, allocate the RMO buffer for it and look for
 	 * the stop-self token if any
 	 */
-- 
2.35.1

[PATCH AUTOSEL 5.4 4/7] powerpc/rtas: avoid scheduling in rtas_os_term()

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit 6c606e57eecc37d6b36d732b1ff7e55b7dc32dd4 ]

It's unsafe to use rtas_busy_delay() to handle a busy status from
the ibm,os-term RTAS function in rtas_os_term():

Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:618
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0
preempt_count: 2, expected: 0
CPU: 7 PID: 1 Comm: swapper/0 Tainted: G      D            6.0.0-rc5-02182-gf8553a572277-dirty #9
Call Trace:
[c000000007b8f000] [c000000001337110] dump_stack_lvl+0xb4/0x110 (unreliable)
[c000000007b8f040] [c0000000002440e4] __might_resched+0x394/0x3c0
[c000000007b8f0e0] [c00000000004f680] rtas_busy_delay+0x120/0x1b0
[c000000007b8f100] [c000000000052d04] rtas_os_term+0xb8/0xf4
[c000000007b8f180] [c0000000001150fc] pseries_panic+0x50/0x68
[c000000007b8f1f0] [c000000000036354] ppc_panic_platform_handler+0x34/0x50
[c000000007b8f210] [c0000000002303c4] notifier_call_chain+0xd4/0x1c0
[c000000007b8f2b0] [c0000000002306cc] atomic_notifier_call_chain+0xac/0x1c0
[c000000007b8f2f0] [c0000000001d62b8] panic+0x228/0x4d0
[c000000007b8f390] [c0000000001e573c] do_exit+0x140c/0x1420
[c000000007b8f480] [c0000000001e586c] make_task_dead+0xdc/0x200

Use rtas_busy_delay_time() instead, which signals without side effects
whether to attempt the ibm,os-term RTAS call again.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-5-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/rtas.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 8ec69ea81fb4..139377f37b74 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -731,10 +731,15 @@ void rtas_os_term(char *str)
 
 	snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str);
 
+	/*
+	 * Keep calling as long as RTAS returns a "try again" status,
+	 * but don't use rtas_busy_delay(), which potentially
+	 * schedules.
+	 */
 	do {
 		status = rtas_call(ibm_os_term_token, 1, 1, NULL,
 				   __pa(rtas_os_term_buf));
-	} while (rtas_busy_delay(status));
+	} while (rtas_busy_delay_time(status));
 
 	if (status != 0)
 		printk(KERN_EMERG "ibm,os-term call failed %d\n", status);
-- 
2.35.1

[PATCH AUTOSEL 5.4 5/7] powerpc/msi: Fix deassociation of MSI descriptors

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 4545c6a3d6ba71747eaa984c338ddd745e56e23f ]

Since 2f2940d16823 ("genirq/msi: Remove filter from
msi_free_descs_free_range()"), the core MSI code relies on the
msi_desc->irq field to have been cleared before the descriptor
can be freed, as it indicates that there is no association with
a device anymore.

The irq domain code provides this guarantee, and so does s390,
which is one of the two architectures not using irq domains for
MSIs.

Powerpc, however, is missing this particular requirements,
leading in a splat and leaked MSI descriptors.

Adding the now required irq reset to the handful of powerpc backends
that implement MSIs fixes that particular problem.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/70dab88e-6119-0c12-7c6a-61bcbe239f66@roeck-us.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/4xx/hsta_msi.c  | 1 +
 arch/powerpc/platforms/cell/axon_msi.c | 1 +
 arch/powerpc/platforms/pasemi/msi.c    | 1 +
 arch/powerpc/sysdev/fsl_msi.c          | 1 +
 arch/powerpc/sysdev/mpic_u3msi.c       | 1 +
 5 files changed, 5 insertions(+)

diff --git a/arch/powerpc/platforms/4xx/hsta_msi.c b/arch/powerpc/platforms/4xx/hsta_msi.c
index c950fed43b32..4f65bd0cf111 100644
--- a/arch/powerpc/platforms/4xx/hsta_msi.c
+++ b/arch/powerpc/platforms/4xx/hsta_msi.c
@@ -117,6 +117,7 @@ static void hsta_teardown_msi_irqs(struct pci_dev *dev)
 		msi_bitmap_free_hwirqs(&ppc4xx_hsta_msi.bmp, irq, 1);
 		pr_debug("%s: Teardown IRQ %u (index %u)\n", __func__,
 			 entry->irq, irq);
+		entry->irq = 0;
 	}
 }
 
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index ba33140e671d..d141f64150e8 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -295,6 +295,7 @@ static void axon_msi_teardown_msi_irqs(struct pci_dev *dev)
 
 		irq_set_msi_desc(entry->irq, NULL);
 		irq_dispose_mapping(entry->irq);
+		entry->irq = 0;
 	}
 }
 
diff --git a/arch/powerpc/platforms/pasemi/msi.c b/arch/powerpc/platforms/pasemi/msi.c
index d38944a1e258..76393c158ada 100644
--- a/arch/powerpc/platforms/pasemi/msi.c
+++ b/arch/powerpc/platforms/pasemi/msi.c
@@ -69,6 +69,7 @@ static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev)
 		hwirq = virq_to_hw(entry->irq);
 		irq_set_msi_desc(entry->irq, NULL);
 		irq_dispose_mapping(entry->irq);
+		entry->irq = 0;
 		msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, ALLOC_CHUNK);
 	}
 
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index d276c5e96445..5c3f3173638e 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -132,6 +132,7 @@ static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
 		msi_data = irq_get_chip_data(entry->irq);
 		irq_set_msi_desc(entry->irq, NULL);
 		irq_dispose_mapping(entry->irq);
+		entry->irq = 0;
 		msi_bitmap_free_hwirqs(&msi_data->bitmap, hwirq, 1);
 	}
 
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
index 3861023d378a..43686c82e483 100644
--- a/arch/powerpc/sysdev/mpic_u3msi.c
+++ b/arch/powerpc/sysdev/mpic_u3msi.c
@@ -111,6 +111,7 @@ static void u3msi_teardown_msi_irqs(struct pci_dev *pdev)
 		hwirq = virq_to_hw(entry->irq);
 		irq_set_msi_desc(entry->irq, NULL);
 		irq_dispose_mapping(entry->irq);
+		entry->irq = 0;
 		msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq, 1);
 	}
 
-- 
2.35.1

[PATCH AUTOSEL 5.4 6/7] HID: multitouch: fix Asus ExpertBook P2 P2451FA trackpoint

[Sasha Levin]

From: José Expósito <jose.exposito89@gmail.com>

[ Upstream commit 4eab1c2fe06c98a4dff258dd64800b6986c101e9 ]

The HID descriptor of this device contains two mouse collections, one
for mouse emulation and the other for the trackpoint.

Both collections get merged and, because the first one defines X and Y,
the movemenent events reported by the trackpoint collection are
ignored.

Set the MT_CLS_WIN_8_FORCE_MULTI_INPUT class for this device to be able
to receive its reports.

This fix is similar to/based on commit 40d5bb87377a ("HID: multitouch:
enable multi-input as a quirk for some devices").

Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/825
Reported-by: Akito <the@akito.ooo>
Tested-by: Akito <the@akito.ooo>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-multitouch.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 463a8deae37e..9db327654580 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1953,6 +1953,10 @@ static const struct hid_device_id mt_devices[] = {
 		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
 			USB_VENDOR_ID_ELAN, 0x313a) },
 
+	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT,
+		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
+			USB_VENDOR_ID_ELAN, 0x3148) },
+
 	/* Elitegroup panel */
 	{ .driver_data = MT_CLS_SERIAL,
 		MT_USB_DEVICE(USB_VENDOR_ID_ELITEGROUP,
-- 
2.35.1

[PATCH AUTOSEL 5.4 7/7] HID: plantronics: Additional PIDs for double volume key presses quirk

[Sasha Levin]

From: Terry Junge <linuxhid@cosmicgizmosystems.com>

[ Upstream commit 3d57f36c89d8ba32b2c312f397a37fd1a2dc7cfc ]

I no longer work for Plantronics (aka Poly, aka HP) and do not have
access to the headsets in order to test. However, as noted by Maxim,
the other 32xx models that share the same base code set as the 3220
would need the same quirk. This patch adds the PIDs for the rest of
the Blackwire 32XX product family that require the quirk.

Plantronics Blackwire 3210 Series (047f:c055)
Plantronics Blackwire 3215 Series (047f:c057)
Plantronics Blackwire 3225 Series (047f:c058)

Quote from previous patch by Maxim Mikityanskiy
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.

The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
End quote

Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h         | 3 +++
 drivers/hid/hid-plantronics.c | 9 +++++++++
 2 files changed, 12 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 0d4479f478aa..7320cca1a3e5 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -938,7 +938,10 @@
 #define USB_DEVICE_ID_ORTEK_IHOME_IMAC_A210S	0x8003
 
 #define USB_VENDOR_ID_PLANTRONICS	0x047f
+#define USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3210_SERIES	0xc055
 #define USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES	0xc056
+#define USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3215_SERIES	0xc057
+#define USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3225_SERIES	0xc058
 
 #define USB_VENDOR_ID_PANASONIC		0x04da
 #define USB_DEVICE_ID_PANABOARD_UBT780	0x1044
diff --git a/drivers/hid/hid-plantronics.c b/drivers/hid/hid-plantronics.c
index e81b7cec2d12..3d414ae194ac 100644
--- a/drivers/hid/hid-plantronics.c
+++ b/drivers/hid/hid-plantronics.c
@@ -198,9 +198,18 @@ static int plantronics_probe(struct hid_device *hdev,
 }
 
 static const struct hid_device_id plantronics_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
+					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3210_SERIES),
+		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
 					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES),
 		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
+					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3215_SERIES),
+		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
+					 USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3225_SERIES),
+		.driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, HID_ANY_ID) },
 	{ }
 };
-- 
2.35.1