[PATCH 6.1 000/224] 6.1.22-rc1 review

[PATCH 6.1 000/224] 6.1.22-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.1.22 release.
There are 224 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 30 Mar 2023 14:25:33 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.22-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.1.22-rc1

Ma Jun <Jun.Ma2@amd.com>
    drm/amdkfd: Fix the memory overrun

Yifan Zhang <yifan1.zhang@amd.com>
    drm/amdkfd: add GC 11.0.4 KFD support

Ma Jun <Jun.Ma2@amd.com>
    drm/amdkfd: Fix the warning of array-index-out-of-bounds

Prike Liang <Prike.Liang@amd.com>
    drm/amdkfd: introduce dummy cache info for property asic

Vincent Guittot <vincent.guittot@linaro.org>
    sched/fair: Sanitize vruntime of entity being migrated

Zhang Qiao <zhangqiao22@huawei.com>
    sched/fair: sanitize vruntime of entity being placed

Mike Snitzer <snitzer@kernel.org>
    dm crypt: avoid accessing uninitialized tasklet

Mikulas Patocka <mpatocka@redhat.com>
    dm crypt: add cond_resched() to dmcrypt_write()

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    dm stats: check for and propagate alloc_percpu failure

Wei Chen <harperchen1110@gmail.com>
    i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()

Ivan Bornyakov <i.bornyakov@metrotek.ru>
    bus: imx-weim: fix branch condition evaluates to a garbage value

Liam R. Howlett <Liam.Howlett@oracle.com>
    mm/ksm: fix race with VMA iteration and mm_struct teardown

Abel Vesa <abel.vesa@linaro.org>
    soc: qcom: llcc: Fix slice configuration values for SC8280XP

Manivannan Sadhasivam <mani@kernel.org>
    arm64: dts: qcom: sm8150: Fix the iommu mask used for PCIe controllers

Krishna chaitanya chundru <quic_krichai@quicinc.com>
    arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent

Cristian Marussi <cristian.marussi@arm.com>
    firmware: arm_scmi: Fix device node validation for mailbox transport

Rijo Thomas <Rijo-john.Thomas@amd.com>
    tee: amdtee: fix race condition in amdtee_open_session

Nathan Chancellor <nathan@kernel.org>
    riscv: Handle zicsr/zifencei issues between clang and binutils

Dylan Jhong <dylan@andestech.com>
    riscv: mm: Fix incorrect ASID argument when flushing TLB

Tim Huang <tim.huang@amd.com>
    drm/amdgpu: reposition the gpu reset checking for reuse

Tim Huang <tim.huang@amd.com>
    drm/amdgpu: skip ASIC reset for APUs when go to S4

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/i915: Preserve crtc_state->inherited during state clearing

Nirmoy Das <nirmoy.das@intel.com>
    drm/i915/active: Fix missing debug object activation

Kai-Heng Feng <kai.heng.feng@canonical.com>
    drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD Navi

Johan Hovold <johan+linaro@kernel.org>
    drm/meson: fix missing component unbind on bind errors

Hersen Wu <hersenxs.wu@amd.com>
    drm/amd/display: fix wrong index used in dccg32_set_dpstreamclk

Matheus Castello <matheus.castello@toradex.com>
    drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy()

Felix Fietkau <nbd@nbd.name>
    wifi: mac80211: fix qos on mesh interfaces

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: return unsupported error on smb1 mount

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: return STATUS_NOT_SUPPORTED on unsupported smb2.0 dialect

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: don't terminate inactive sessions after a few seconds

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: set FILE_NAMED_STREAMS attribute in FS_ATTRIBUTE_INFORMATION

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: fix wrong signingkey creation when encryption is AES256

Liam R. Howlett <Liam.Howlett@oracle.com>
    maple_tree: fix mas_skip_node() end slot detection

Liam R. Howlett <Liam.Howlett@oracle.com>
    test_maple_tree: add more testing for mas_empty_area()

Peter Collingbourne <pcc@google.com>
    Revert "kasan: drop skip_kasan_poison variable in free_pages_prepare"

Savino Dicanosa <sd7.dev@pm.me>
    io_uring/rsrc: fix null-ptr-deref in io_file_bitmap_get()

Jens Axboe <axboe@kernel.dk>
    io_uring/net: avoid sending -ECONNABORTED on repeated connection requests

Marco Elver <elver@google.com>
    kfence: avoid passing -g for test

Muchun Song <muchun.song@linux.dev>
    mm: kfence: fix using kfence_metadata without initialization in show_object()

Hans de Goede <hdegoede@redhat.com>
    usb: ucsi_acpi: Increase the command completion timeout

Hans de Goede <hdegoede@redhat.com>
    usb: ucsi: Fix NULL pointer deref in ucsi_connector_change()

Wesley Cheng <quic_wcheng@quicinc.com>
    usb: dwc3: gadget: Add 1ms delay after end transfer command without IOC

Xu Yang <xu.yang_2@nxp.com>
    usb: chipidea: core: fix possible concurrent when switch role

Xu Yang <xu.yang_2@nxp.com>
    usb: chipdea: core: fix return -EINVAL if request role is the same with current role

Pawel Laszczak <pawell@cadence.com>
    usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver

Pawel Laszczak <pawell@cadence.com>
    usb: cdnsp: Fixes issue with redundant Status Stage

Pawel Laszczak <pawell@cadence.com>
    usb: cdns3: Fix issue with using incorrect PCI device function

Xu Yang <xu.yang_2@nxp.com>
    usb: typec: tcpm: fix warning when handle discover_identity message

Xu Yang <xu.yang_2@nxp.com>
    usb: typec: tcpm: fix create duplicate source-capabilities file

Coly Li <colyli@suse.de>
    dm thin: fix deadlock when swapping to thin device

Lin Ma <linma@zju.edu.cn>
    igb: revert rtnl_lock() that causes deadlock

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name

Jeff Layton <jlayton@kernel.org>
    lockd: set file_lock start and end when decoding nlm4 testargs

Nathan Huckleberry <nhuck@google.com>
    fsverity: Remove WQ_UNBOUND from fsverity read workqueue

Eric Biggers <ebiggers@google.com>
    fscrypt: destroy keyring after security_sb_delete()

Geert Uytterhoeven <geert+renesas@glider.be>
    mm/slab: Fix undefined init_cache_node_node() for NUMA and !SMP

Hans de Goede <hdegoede@redhat.com>
    efi: sysfb_efi: Fix DMI quirks not working for simpledrm

Min Li <lm0963hack@gmail.com>
    Bluetooth: Fix race condition in hci_cmd_sync_clear

Naohiro Aota <naohiro.aota@wdc.com>
    btrfs: zoned: fix btrfs_can_activate_zone() to support DUP profile

Alvin Šipraga <alsi@bang-olufsen.dk>
    usb: gadget: u_audio: don't let userspace block driver unbind

Fabrice Gasnier <fabrice.gasnier@foss.st.com>
    usb: dwc2: fix a devres leak in hw_enable upon suspend resume

Ziyang Huang <hzyitc@outlook.com>
    usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"

Alexander Stein <alexander.stein@ew.tq-group.com>
    usb: misc: onboard-hub: add support for Microchip USB2517 USB 2.0 hub

Joel Selvaraj <joelselvaraj.oss@gmail.com>
    scsi: core: Add BLIST_SKIP_VPD_PAGES for SKhynix H28U74301AMR

Chang S. Bae <chang.seok.bae@intel.com>
    selftests/x86/amx: Add a ptrace test

Chang S. Bae <chang.seok.bae@intel.com>
    x86/fpu/xstate: Prevent false-positive warning in __copy_xstate_uabi_buf()

Paulo Alcantara <pc@manguebit.com>
    cifs: fix dentry lookups in directory handle cache

Shyam Prasad N <sprasad@microsoft.com>
    cifs: print session id while listing open files

Shyam Prasad N <sprasad@microsoft.com>
    cifs: dump pending mids for all channels in DebugData

Shyam Prasad N <sprasad@microsoft.com>
    cifs: empty interface list when server doesn't support query interfaces

Shyam Prasad N <sprasad@microsoft.com>
    cifs: do not poll server interfaces too regularly

Shyam Prasad N <sprasad@microsoft.com>
    cifs: append path to open_enter trace event

Shyam Prasad N <sprasad@microsoft.com>
    cifs: lock chan_lock outside match_session

Davide Caratti <dcaratti@redhat.com>
    act_mirred: use the backlog for nested calls to mirred ingress

Davide Caratti <dcaratti@redhat.com>
    net/sched: act_mirred: better wording on protection against excessive stack growth

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd: Fix initialization mistake for NBIO 7.3.0

lyndonli <Lyndon.Li@amd.com>
    drm/amdgpu: Fix call trace warning and hang when removing amdgpu device

Al Viro <viro@zeniv.linux.org.uk>
    sh: sanitize the flags on sigreturn

Swapnil Patel <Swapnil.Patel@amd.com>
    drm/amd/display: Update clock table to include highest clock setting

Enrico Sau <enrico.sau@gmail.com>
    net: usb: qmi_wwan: add Telit 0x1080 composition

Enrico Sau <enrico.sau@gmail.com>
    net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990

Daniel Scally <dan.scally@ideasonboard.com>
    platform/x86: int3472: Add GPIOs to Surface Go 3 Board data

Michael Kelley <mikelley@microsoft.com>
    scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file

Ranjan Kumar <ranjan.kumar@broadcom.com>
    scsi: mpi3mr: Bad drive in topology results kernel crash

Ranjan Kumar <ranjan.kumar@broadcom.com>
    scsi: mpi3mr: NVMe command size greater than 8K fails

Ranjan Kumar <ranjan.kumar@broadcom.com>
    scsi: mpi3mr: Wait for diagnostic save during controller init

Ranjan Kumar <ranjan.kumar@broadcom.com>
    scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled

Jakob Koschel <jkl820.git@gmail.com>
    scsi: lpfc: Avoid usage of list iterator variable after loop

Justin Tee <justin.tee@broadcom.com>
    scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()

Adrien Thierry <athierry@redhat.com>
    scsi: ufs: core: Add soft dependency on governor_simpleondemand

Kang Chen <void0red@gmail.com>
    scsi: hisi_sas: Check devm_add_action() return value

Daniel Wagner <dwagner@suse.de>
    scsi: qla2xxx: Add option to disable FC2 Target support

Maurizio Lombardi <mlombard@redhat.com>
    scsi: target: iscsi: Fix an error message in iscsi_check_key()

Lorenz Bauer <lorenz.bauer@isovalent.com>
    selftests/bpf: check that modifier resolves after pointer

Michael Schmitz <schmitzmic@gmail.com>
    m68k: Only force 030 bus error if PC not in exception table

Kars de Jong <jongk@linux-m68k.org>
    m68k: mm: Fix systems with memory at end of 32-bit address space

Reka Norman <rekanorman@chromium.org>
    HID: intel-ish-hid: ipc: Fix potential use-after-free in work function

Rafał Szalecki <perexist7@gmail.com>
    HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse

Alexander Aring <aahringo@redhat.com>
    ca8210: fix mac_len negative array access

Danny Kaehn <kaehndan@gmail.com>
    HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded

Alexandr Sapozhnikov <alsp705@gmail.com>
    drm/cirrus: NULL-check pipe->plane.state->fb in cirrus_pipe_update()

Alexandre Ghiti <alex@ghiti.fr>
    riscv: Bump COMMAND_LINE_SIZE value to 1024

Mario Limonciello <mario.limonciello@amd.com>
    ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable

Mario Limonciello <mario.limonciello@amd.com>
    ACPI: x86: Drop quirk for HP Elitebook

Duc Anh Le <lub.the.studio@gmail.com>
    ASoC: amd: yc: Add DMI entries to support HP OMEN 16-n0xxx (8A43)

Adrien Thierry <athierry@redhat.com>
    scsi: ufs: core: Initialize devfreq synchronously

Joseph Hunkeler <jhunkeler@gmail.com>
    ASoC: amd: yp: Add OMEN by HP Gaming Laptop 16z-n000 to quirks

Tom Rix <trix@redhat.com>
    thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bit

Mario Limonciello <mario.limonciello@amd.com>
    thunderbolt: Use const qualifier for `ring_interrupt_index`

Gil Fine <gil.fine@linux.intel.com>
    thunderbolt: Add missing UNSET_INBOUND_SBTX for retimer access

Mario Limonciello <mario.limonciello@amd.com>
    thunderbolt: Disable interrupt auto clear for rings

Mika Westerberg <mika.westerberg@linux.intel.com>
    thunderbolt: Fix memory leak in margining

Sanjay R Mehta <sanju.mehta@amd.com>
    thunderbolt: Add quirk to disable CLx

Mika Westerberg <mika.westerberg@linux.intel.com>
    thunderbolt: Call tb_check_quirks() after initializing adapters

Mika Westerberg <mika.westerberg@linux.intel.com>
    thunderbolt: Use scale field when allocating USB3 bandwidth

Yaroslav Furman <yaro330@gmail.com>
    uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2

Steve French <stfrench@microsoft.com>
    smb3: fix unusable share after force unmount failure

Steve French <stfrench@microsoft.com>
    smb3: lower default deferred close timeout to address perf regression

Nilesh Javali <njavali@marvell.com>
    scsi: qla2xxx: Perform lockless command completion in abort path

Quinn Tran <qutran@marvell.com>
    scsi: qla2xxx: Synchronize the IOCB count to be in order

Frank Crawford <frank@crawford.emu.id.au>
    hwmon (it87): Fix voltage scaling for chips with 10.9mV ADCs

Phinex Hung <phinex@realtek.com>
    hwmon: fix potential sensor registration fail if of_node is missing

Frederic Weisbecker <frederic@kernel.org>
    entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-up

Breno Leitao <leitao@debian.org>
    perf/x86/amd/core: Always clear status for idx

Josh Poimboeuf <jpoimboe@kernel.org>
    entry: Fix noinstr warning in __enter_from_user_mode()

Tzung-Bi Shih <tzungbi@kernel.org>
    platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl

Sungwoo Kim <iam@sung-woo.kim>
    Bluetooth: HCI: Fix global-out-of-bounds

Howard Chung <howardchung@google.com>
    Bluetooth: mgmt: Fix MGMT add advmon with RSSI command

Zheng Wang <zyytlz.wz@163.com>
    Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: L2CAP: Fix responding with wrong PDU type

Stephan Gerhold <stephan.gerhold@kernkonzept.com>
    Bluetooth: btqcomsmd: Fix command timeout after setting BD address

Hersen Wu <hersenxs.wu@amd.com>
    drm/amd/display: Set dcn32 caps.seamless_odm

Liang He <windhl@126.com>
    net: mdio: thunder: Add missing fwnode_handle_put()

Arınç ÜNAL <arinc.unal@arinc9.com>
    net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case

Arınç ÜNAL <arinc.unal@arinc9.com>
    net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()

Arınç ÜNAL <arinc.unal@arinc9.com>
    net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()

Grant Grundler <grundler@chromium.org>
    net: asix: fix modprobe "sysfs: cannot create duplicate filename"

Joshua Washington <joshwash@google.com>
    gve: Cache link_speed value from device

Brian Gix <brian.gix@gmail.com>
    Bluetooth: Remove "Power-on" check from Mesh feature

Pauli Virtanen <pav@iki.fi>
    Bluetooth: ISO: fix timestamped HCI ISO data packet parsing

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: btusb: Remove detection of ISO packets over bulk

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet

Zhengping Jiang <jiangzp@google.com>
    Bluetooth: hci_sync: Resume adv with no RPA when active scan

ChenXiaoSong <chenxiaosong2@huawei.com>
    ksmbd: fix possible refcount leak in smb2_open()

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: add low bound validation to FSCTL_QUERY_ALLOCATED_RANGES

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: add low bound validation to FSCTL_SET_ZERO_DATA

Roger Pau Monne <roger.pau@citrix.com>
    hvc/xen: prevent concurrent accesses to the shared ring

Ido Schimmel <idosch@nvidia.com>
    mlxsw: spectrum_fid: Fix incorrect local port type

Caleb Sander <csander@purestorage.com>
    nvme-tcp: fix nvme_tcp_term_pdu to match spec

Zhang Changzhong <zhangchangzhong@huawei.com>
    net/sonic: use dma_mapping_error() for error check

Eric Dumazet <edumazet@google.com>
    erspan: do not use skb_mac_header() in ndo_start_xmit()

Li Zetao <lizetao1@huawei.com>
    atm: idt77252: fix kmemleak when rmmod idt77252

Álvaro Fernández Rojas <noltari@gmail.com>
    net: dsa: tag_brcm: legacy: fix daisy-chained switches

Dan Carpenter <error27@gmail.com>
    net/mlx5: E-Switch, Fix an Oops in error handling code

Maher Sanalla <msanalla@nvidia.com>
    net/mlx5: Read the TC mapping of all priorities on ETS query

Emeel Hakim <ehakim@nvidia.com>
    net/mlx5e: Overcome slow response for first macsec ASO WQE

Lama Kayal <lkayal@nvidia.com>
    net/mlx5: Fix steering rules cleanup

Gavin Li <gavinl@nvidia.com>
    net/mlx5e: Block entering switchdev mode with ns inconsistency

Gavin Li <gavinl@nvidia.com>
    net/mlx5e: Set uplink rep as NETNS_LOCAL

Daniel Borkmann <daniel@iogearbox.net>
    bpf: Adjust insufficient default bpf_jit_limit

Radoslaw Tyl <radoslawx.tyl@intel.com>
    i40e: fix flow director packet filter programming

Stefan Assmann <sassmann@kpanic.de>
    iavf: fix hang on reboot with ice

Michal Swiatkowski <michal.swiatkowski@intel.com>
    ice: check if VF exists before mode check

David Howells <dhowells@redhat.com>
    keys: Do not cache key in task struct if key is requested from kernel thread

Masami Hiramatsu (Google) <mhiramat@kernel.org>
    bootconfig: Fix testcase to increase max node

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    octeontx2-vf: Add missing free for alloc_percpu

Geoff Levand <geoff@infradead.org>
    net/ps3_gelic_net: Use dma_mapping_error

Geoff Levand <geoff@infradead.org>
    net/ps3_gelic_net: Fix RX sk_buff length

Szymon Heidrich <szymon.heidrich@gmail.com>
    net: usb: lan78xx: Limit packet length to skb->len

Zheng Wang <zyytlz.wz@163.com>
    net: qcom/emac: Fix use after free bug in emac_remove due to race condition

Andrzej Hajda <andrzej.hajda@intel.com>
    drm/i915/gt: perform uc late init after probe error injection

John Harrison <John.C.Harrison@Intel.com>
    drm/i915/guc: Fix missing ecodes

John Harrison <John.C.Harrison@Intel.com>
    drm/i915/guc: Rename GuC register state capture node to be more obvious

Tejas Upadhyay <tejas.upadhyay@intel.com>
    drm/i915/fbdev: lock the fbdev obj before vma pin

Nirmoy Das <nirmoy.das@intel.com>
    drm/i915: Print return value on error

Ido Schimmel <idosch@nvidia.com>
    mlxsw: core_thermal: Fix fan speed in maximum cooling state

Daniel Lezcano <daniel.lezcano@linaro.org>
    thermal/drivers/mellanox: Use generic thermal_zone_get_trip() function

Jochen Henneberg <jh@henneberg-systemdesign.com>
    net: stmmac: Fix for mismatched host/device DMA address width

Florian Fainelli <f.fainelli@gmail.com>
    net: mdio: fix owner field for mdio buses registered using ACPI

Maxime Bizon <mbizon@freebox.fr>
    net: mdio: fix owner field for mdio buses registered using device-tree

Florian Fainelli <f.fainelli@gmail.com>
    net: phy: Ensure state transitions are processed from phy_stop()

Zheng Wang <zyytlz.wz@163.com>
    xirc2ps_cs: Fix use after free bug in xirc2ps_detach

Daniil Tatianin <d-tatianin@yandex-team.ru>
    qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_info

Ard Biesheuvel <ardb@kernel.org>
    efi/libstub: smbios: Use length member instead of record struct size

Szymon Heidrich <szymon.heidrich@gmail.com>
    net: usb: smsc95xx: Limit packet length to skb->len

Álvaro Fernández Rojas <noltari@gmail.com>
    net: dsa: b53: mmap: fix device tree support

Jeff Layton <jlayton@kernel.org>
    nfsd: don't replace page in rq_pages if it's a continuation of last page

Yu Kuai <yukuai3@huawei.com>
    scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate()

Yicong Yang <yangyicong@hisilicon.com>
    i2c: hisi: Only use the completion interrupt to finish the transfer

Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
    i2c: mxs: ensure that DMA buffers are safe for DMA

Alexander Stein <alexander.stein@ew.tq-group.com>
    i2c: imx-lpi2c: check only for enabled interrupt flags

AKASHI Takahiro <takahiro.akashi@linaro.org>
    igc: fix the validation logic for taprio's gate list

Akihiko Odaki <akihiko.odaki@daynix.com>
    igbvf: Regard vf reset nack as success

Gaosheng Cui <cuigaosheng1@huawei.com>
    intel/igbvf: free irq on the error path in igbvf_request_msix()

Ahmed Zaki <ahmed.zaki@intel.com>
    iavf: do not track VLAN 0 filters

Alexander Lobakin <aleksander.lobakin@intel.com>
    iavf: fix non-tunneled IPv6 UDP packet type and hashing

Alexander Lobakin <aleksander.lobakin@intel.com>
    iavf: fix inverted Rx hash condition leading to disabled hash

Kal Conley <kal.conley@dectris.com>
    xsk: Add missing overflow check in xdp_umem_reg

Dave Wysochanski <dwysocha@redhat.com>
    NFS: Fix /proc/PID/io read_bytes for buffered reads

Alexander Stein <alexander.stein@ew.tq-group.com>
    arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes

Marek Vasut <marex@denx.de>
    arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes

Peng Fan <peng.fan@nxp.com>
    ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl

Peng Fan <peng.fan@nxp.com>
    ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl

Peng Fan <peng.fan@nxp.com>
    ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl

Andrew Halaney <ahalaney@redhat.com>
    arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio

Wei Fang <wei.fang@nxp.com>
    arm64: dts: imx8dxl-evk: Disable hibernation mode of AR8031 for EQOS

Zheng Wang <zyytlz.wz@163.com>
    power: supply: da9150: Fix use after free bug in da9150_charger_remove due to race condition

Zheng Wang <zyytlz.wz@163.com>
    power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition

Manivannan Sadhasivam <mani@kernel.org>
    arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent

Cruise Hung <Cruise.Hung@amd.com>
    drm/amd/display: Fix DP MST sinks removal issue

Paolo Abeni <pabeni@redhat.com>
    mptcp: fix UaF in listener shutdown

Paolo Abeni <pabeni@redhat.com>
    mptcp: use the workqueue to destroy unaccepted sockets

Paolo Abeni <pabeni@redhat.com>
    mptcp: refactor passive socket initialization

Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
    drm/amd/display: Remove OTG DIV register write for Virtual signals.

Aurabindo Pillai <aurabindo.pillai@amd.com>
    drm/amd/display: fix k1 k2 divider programming for phantom streams

Eric Bernstein <eric.bernstein@amd.com>
    drm/amd/display: Include virtual signal to set k1 and k2 values

Costa Shulyupin <costa.shul@redhat.com>
    tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr

Song Liu <song@kernel.org>
    perf: fix perf_event_context->time

Yang Jihong <yangjihong1@huawei.com>
    perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output

Konrad Dybcio <konrad.dybcio@linaro.org>
    interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    interconnect: qcom: sm8450: switch to qcom_icc_rpmh_* function

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    interconnect: qcom: osm-l3: fix icc_onecell_data allocation


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/e60k02.dtsi                      |   1 +
 arch/arm/boot/dts/e70k02.dtsi                      |   1 +
 arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts       |   1 +
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts      |   6 +-
 .../boot/dts/freescale/imx8mm-nitrogen-r2.dts      |   2 +-
 arch/arm64/boot/dts/freescale/imx8mn.dtsi          |   5 +
 arch/arm64/boot/dts/freescale/imx93.dtsi           |  16 +
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |   2 +
 arch/arm64/boot/dts/qcom/sm8150.dtsi               |   4 +-
 arch/arm64/boot/dts/qcom/sm8450.dtsi               |   1 +
 arch/m68k/kernel/traps.c                           |   4 +-
 arch/m68k/mm/motorola.c                            |  10 +-
 arch/riscv/Kconfig                                 |  22 ++
 arch/riscv/Makefile                                |  10 +-
 arch/riscv/include/asm/tlbflush.h                  |   2 +
 arch/riscv/include/uapi/asm/setup.h                |   8 +
 arch/riscv/mm/context.c                            |   2 +-
 arch/riscv/mm/tlbflush.c                           |   2 +-
 arch/sh/include/asm/processor_32.h                 |   1 +
 arch/sh/kernel/signal_32.c                         |   3 +
 arch/x86/events/amd/core.c                         |   3 +-
 arch/x86/kernel/fpu/xstate.c                       |  30 +-
 drivers/acpi/x86/s2idle.c                          |  24 --
 drivers/acpi/x86/utils.c                           |  37 +--
 drivers/atm/idt77252.c                             |  11 +
 drivers/bluetooth/btqcomsmd.c                      |  17 +-
 drivers/bluetooth/btsdio.c                         |   1 +
 drivers/bluetooth/btusb.c                          |  10 -
 drivers/bus/imx-weim.c                             |   2 +-
 drivers/firmware/arm_scmi/mailbox.c                |  37 +++
 drivers/firmware/efi/libstub/smbios.c              |   2 +-
 drivers/firmware/efi/sysfb_efi.c                   |   5 +-
 drivers/firmware/sysfb.c                           |   4 +-
 drivers/firmware/sysfb_simplefb.c                  |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu.h                |   5 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c           |  41 ++-
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c         |  15 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c            |   5 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_object.c         |   2 +-
 drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c             |  14 +-
 drivers/gpu/drm/amd/amdgpu/nv.c                    |   2 +-
 drivers/gpu/drm/amd/amdgpu/vi.c                    |  17 +-
 drivers/gpu/drm/amd/amdkfd/kfd_crat.c              | 364 +++++----------------
 drivers/gpu/drm/amd/amdkfd/kfd_crat.h              |  12 +
 drivers/gpu/drm/amd/amdkfd/kfd_device.c            |   2 +
 drivers/gpu/drm/amd/amdkfd/kfd_topology.c          | 245 +++++++++++++-
 drivers/gpu/drm/amd/amdkfd/kfd_topology.h          |   5 +-
 .../drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c |  19 +-
 drivers/gpu/drm/amd/display/dc/core/dc_link.c      |   9 +
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c  |   3 +-
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c |   4 +-
 .../gpu/drm/amd/display/dc/dcn32/dcn32_resource.c  |   1 +
 drivers/gpu/drm/bridge/lontium-lt8912b.c           |   4 +-
 drivers/gpu/drm/i915/display/intel_display.c       |   1 +
 drivers/gpu/drm/i915/display/intel_fbdev.c         |  28 +-
 drivers/gpu/drm/i915/gt/intel_gt.c                 |   4 +-
 drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c     |  30 +-
 drivers/gpu/drm/i915/i915_active.c                 |   3 +-
 drivers/gpu/drm/i915/i915_gpu_error.h              |   2 +-
 drivers/gpu/drm/meson/meson_drv.c                  |  13 +-
 drivers/gpu/drm/tiny/cirrus.c                      |   2 +-
 drivers/hid/hid-cp2112.c                           |   1 +
 drivers/hid/hid-logitech-hidpp.c                   |   2 +
 drivers/hid/intel-ish-hid/ipc/ipc.c                |   9 +-
 drivers/hwmon/hwmon.c                              |   7 +-
 drivers/hwmon/it87.c                               |   4 +-
 drivers/i2c/busses/i2c-hisi.c                      |   6 +-
 drivers/i2c/busses/i2c-imx-lpi2c.c                 |   4 +
 drivers/i2c/busses/i2c-mxs.c                       |  18 +-
 drivers/i2c/busses/i2c-xgene-slimpro.c             |   3 +
 drivers/interconnect/qcom/osm-l3.c                 |   2 +-
 drivers/interconnect/qcom/qcm2290.c                |   4 +-
 drivers/interconnect/qcom/sm8450.c                 |  98 +-----
 drivers/md/dm-crypt.c                              |  16 +-
 drivers/md/dm-stats.c                              |   7 +-
 drivers/md/dm-stats.h                              |   2 +-
 drivers/md/dm-thin.c                               |   2 +
 drivers/md/dm.c                                    |   4 +-
 drivers/net/dsa/b53/b53_mmap.c                     |   2 +-
 drivers/net/dsa/mt7530.c                           |  49 +--
 drivers/net/ethernet/google/gve/gve_ethtool.c      |   5 +-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |   8 +-
 drivers/net/ethernet/intel/iavf/iavf_common.c      |   2 +-
 drivers/net/ethernet/intel/iavf/iavf_main.c        |  13 +
 drivers/net/ethernet/intel/iavf/iavf_txrx.c        |   2 +-
 drivers/net/ethernet/intel/iavf/iavf_virtchnl.c    |   2 -
 drivers/net/ethernet/intel/ice/ice_sriov.c         |   8 +-
 drivers/net/ethernet/intel/igb/igb_main.c          |   2 -
 drivers/net/ethernet/intel/igbvf/netdev.c          |   8 +-
 drivers/net/ethernet/intel/igbvf/vf.c              |  13 +-
 drivers/net/ethernet/intel/igc/igc_main.c          |  20 +-
 .../net/ethernet/marvell/octeontx2/nic/otx2_vf.c   |   2 +
 .../ethernet/mellanox/mlx5/core/en_accel/macsec.c  |   9 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c |   6 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |   6 +-
 .../mellanox/mlx5/core/esw/acl/ingress_ofld.c      |   3 +-
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c  |   1 +
 .../ethernet/mellanox/mlx5/core/eswitch_offloads.c |  19 ++
 drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 216 +++---------
 drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c |   4 +-
 drivers/net/ethernet/natsemi/sonic.c               |   4 +-
 drivers/net/ethernet/qlogic/qed/qed_sriov.c        |   5 +-
 drivers/net/ethernet/qualcomm/emac/emac.c          |   6 +
 drivers/net/ethernet/stmicro/stmmac/common.h       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c    |   2 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c  |   4 +-
 .../net/ethernet/stmicro/stmmac/dwmac-mediatek.c   |   2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  30 +-
 drivers/net/ethernet/toshiba/ps3_gelic_net.c       |  41 +--
 drivers/net/ethernet/toshiba/ps3_gelic_net.h       |   5 +-
 drivers/net/ethernet/xircom/xirc2ps_cs.c           |   5 +
 drivers/net/ieee802154/ca8210.c                    |   2 +
 drivers/net/mdio/acpi_mdio.c                       |  10 +-
 drivers/net/mdio/mdio-thunder.c                    |   1 +
 drivers/net/mdio/of_mdio.c                         |  12 +-
 drivers/net/phy/mdio_devres.c                      |  11 +-
 drivers/net/phy/phy.c                              |  23 +-
 drivers/net/usb/asix_devices.c                     |  32 +-
 drivers/net/usb/cdc_mbim.c                         |   5 +
 drivers/net/usb/lan78xx.c                          |  18 +-
 drivers/net/usb/qmi_wwan.c                         |   1 +
 drivers/net/usb/smsc95xx.c                         |   6 +
 drivers/platform/chrome/cros_ec_chardev.c          |   2 +-
 .../x86/intel/int3472/tps68470_board_data.c        |   5 +-
 drivers/power/supply/bq24190_charger.c             |   1 +
 drivers/power/supply/da9150-charger.c              |   1 +
 drivers/scsi/device_handler/scsi_dh_alua.c         |   6 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c             |   3 +-
 drivers/scsi/lpfc/lpfc_init.c                      |   2 +
 drivers/scsi/lpfc/lpfc_sli.c                       |  12 +-
 drivers/scsi/mpi3mr/mpi3mr_app.c                   |   4 +-
 drivers/scsi/mpi3mr/mpi3mr_fw.c                    |  19 +-
 drivers/scsi/mpi3mr/mpi3mr_transport.c             |  15 +-
 drivers/scsi/qla2xxx/qla_gbl.h                     |   1 +
 drivers/scsi/qla2xxx/qla_init.c                    |   3 +-
 drivers/scsi/qla2xxx/qla_isr.c                     |   3 +-
 drivers/scsi/qla2xxx/qla_os.c                      |  21 +-
 drivers/scsi/scsi_devinfo.c                        |   1 +
 drivers/scsi/storvsc_drv.c                         |  16 +
 drivers/soc/qcom/llcc-qcom.c                       |   6 +-
 drivers/target/iscsi/iscsi_target_parameters.c     |  12 +-
 drivers/tee/amdtee/core.c                          |  29 +-
 drivers/thunderbolt/debugfs.c                      |  12 +-
 drivers/thunderbolt/nhi.c                          |  49 +--
 drivers/thunderbolt/nhi_regs.h                     |   6 +-
 drivers/thunderbolt/quirks.c                       |  13 +
 drivers/thunderbolt/retimer.c                      |  23 +-
 drivers/thunderbolt/sb_regs.h                      |   1 +
 drivers/thunderbolt/switch.c                       |   4 +-
 drivers/thunderbolt/tb.h                           |  12 +-
 drivers/thunderbolt/usb4.c                         |  36 +-
 drivers/tty/hvc/hvc_xen.c                          |  19 +-
 drivers/ufs/core/ufshcd.c                          |  48 ++-
 drivers/usb/cdns3/cdns3-pci-wrap.c                 |   5 +
 drivers/usb/cdns3/cdnsp-ep0.c                      |  19 +-
 drivers/usb/cdns3/cdnsp-pci.c                      |  27 +-
 drivers/usb/chipidea/ci.h                          |   2 +
 drivers/usb/chipidea/core.c                        |  11 +-
 drivers/usb/chipidea/otg.c                         |   5 +-
 drivers/usb/dwc2/drd.c                             |   3 +-
 drivers/usb/dwc2/platform.c                        |  16 +-
 drivers/usb/dwc3/gadget.c                          |  14 +-
 drivers/usb/gadget/function/u_audio.c              |   2 +-
 drivers/usb/misc/onboard_usb_hub.c                 |   1 +
 drivers/usb/misc/onboard_usb_hub.h                 |   1 +
 drivers/usb/storage/unusual_uas.h                  |   7 +
 drivers/usb/typec/tcpm/tcpm.c                      |  28 +-
 drivers/usb/typec/ucsi/ucsi.c                      |  11 +-
 drivers/usb/typec/ucsi/ucsi_acpi.c                 |   2 +-
 fs/btrfs/zoned.c                                   |  14 +-
 fs/cifs/cached_dir.c                               |  37 ++-
 fs/cifs/cifs_debug.c                               |  46 ++-
 fs/cifs/cifsfs.c                                   |   9 +-
 fs/cifs/cifssmb.c                                  |   6 +-
 fs/cifs/connect.c                                  |  14 +-
 fs/cifs/fs_context.h                               |   2 +-
 fs/cifs/link.c                                     |   2 +
 fs/cifs/smb2inode.c                                |   1 +
 fs/cifs/smb2ops.c                                  |  27 +-
 fs/cifs/smb2pdu.c                                  |  12 +-
 fs/cifs/trace.h                                    |  12 +-
 fs/ksmbd/auth.c                                    |   5 +-
 fs/ksmbd/connection.c                              |  11 +-
 fs/ksmbd/connection.h                              |   3 +-
 fs/ksmbd/smb2pdu.c                                 |  20 +-
 fs/ksmbd/smb_common.c                              |  27 +-
 fs/ksmbd/smb_common.h                              |  30 +-
 fs/ksmbd/transport_rdma.c                          |   2 +-
 fs/ksmbd/transport_tcp.c                           |  35 +-
 fs/lockd/clnt4xdr.c                                |   9 +-
 fs/lockd/xdr4.c                                    |  13 +-
 fs/nfs/read.c                                      |   3 +
 fs/nfsd/vfs.c                                      |   9 +-
 fs/nilfs2/ioctl.c                                  |   2 +-
 fs/super.c                                         |  15 +-
 fs/verity/verify.c                                 |  12 +-
 include/linux/acpi_mdio.h                          |   9 +-
 include/linux/context_tracking.h                   |   1 +
 include/linux/context_tracking_state.h             |   2 +
 include/linux/lockd/xdr4.h                         |   1 +
 include/linux/nvme-tcp.h                           |   5 +-
 include/linux/of_mdio.h                            |  22 +-
 include/linux/stmmac.h                             |   2 +-
 include/linux/sysfb.h                              |   9 +-
 include/ufs/ufshcd.h                               |   1 +
 io_uring/filetable.c                               |   3 +
 io_uring/net.c                                     |  25 +-
 io_uring/rsrc.c                                    |   1 +
 kernel/bpf/core.c                                  |   2 +-
 kernel/entry/common.c                              |   5 +-
 kernel/events/core.c                               |   4 +-
 kernel/sched/core.c                                |   3 +
 kernel/sched/fair.c                                |  54 ++-
 kernel/trace/trace_hwlat.c                         |   4 +-
 lib/maple_tree.c                                   |  24 +-
 lib/test_maple_tree.c                              |  48 +++
 mm/kfence/Makefile                                 |   2 +-
 mm/kfence/core.c                                   |  10 +-
 mm/ksm.c                                           |  11 +-
 mm/page_alloc.c                                    |   3 +-
 mm/slab.c                                          |   2 +-
 net/bluetooth/hci_core.c                           |  23 +-
 net/bluetooth/hci_sync.c                           |  68 ++--
 net/bluetooth/iso.c                                |   9 +-
 net/bluetooth/l2cap_core.c                         | 117 ++++---
 net/bluetooth/mgmt.c                               |   9 +-
 net/dsa/tag_brcm.c                                 |  10 +-
 net/ipv4/ip_gre.c                                  |   4 +-
 net/ipv6/ip6_gre.c                                 |   4 +-
 net/mac80211/wme.c                                 |   6 +-
 net/mptcp/protocol.c                               |  63 ++--
 net/mptcp/protocol.h                               |   6 +-
 net/mptcp/subflow.c                                | 116 ++-----
 net/sched/act_mirred.c                             |  23 +-
 net/xdp/xdp_umem.c                                 |  13 +-
 security/keys/request_key.c                        |   9 +-
 sound/soc/amd/yc/acp6x-mach.c                      |  14 +
 tools/bootconfig/test-bootconfig.sh                |  12 +-
 tools/testing/selftests/bpf/prog_tests/btf.c       |  28 ++
 .../testing/selftests/net/forwarding/tc_actions.sh |  49 ++-
 tools/testing/selftests/x86/amx.c                  | 108 +++++-
 242 files changed, 2367 insertions(+), 1453 deletions(-)

[PATCH 6.1 001/224] interconnect: qcom: osm-l3: fix icc_onecell_data allocation

[Greg Kroah-Hartman]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit f77ebdda0ee652124061c2ac42399bb6c367e729 ]

This is a struct with a trailing zero-length array of icc_node pointers
but it's allocated as if it were a single array of icc_nodes instead.

Fortunately this overallocates memory rather then allocating less memory
than required.

Fix by replacing devm_kcalloc() with devm_kzalloc() and struct_size()
macro.

Fixes: 5bc9900addaf ("interconnect: qcom: Add OSM L3 interconnect provider support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-2-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/interconnect/qcom/osm-l3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
index 333adb21e7176..46b538e6c07b6 100644
--- a/drivers/interconnect/qcom/osm-l3.c
+++ b/drivers/interconnect/qcom/osm-l3.c
@@ -294,7 +294,7 @@ static int qcom_osm_l3_probe(struct platform_device *pdev)
 	qnodes = desc->nodes;
 	num_nodes = desc->num_nodes;
 
-	data = devm_kcalloc(&pdev->dev, num_nodes, sizeof(*node), GFP_KERNEL);
+	data = devm_kzalloc(&pdev->dev, struct_size(data, nodes, num_nodes), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-- 
2.39.2

[PATCH 6.1 002/224] interconnect: qcom: sm8450: switch to qcom_icc_rpmh_* function

[Greg Kroah-Hartman]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 87e8fab1917a2b3f6e3dedfd1cdf22a1416e6676 ]

Change sm8450 interconnect driver to use generic qcom_icc_rpmh_*
functions rather than embedding a copy of thema. This also fixes an
overallocation of memory for icc_onecell_data structure.

Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-3-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/interconnect/qcom/sm8450.c | 98 +-----------------------------
 1 file changed, 2 insertions(+), 96 deletions(-)

diff --git a/drivers/interconnect/qcom/sm8450.c b/drivers/interconnect/qcom/sm8450.c
index e3a12e3d6e061..2d7a8e7b85ec2 100644
--- a/drivers/interconnect/qcom/sm8450.c
+++ b/drivers/interconnect/qcom/sm8450.c
@@ -1844,100 +1844,6 @@ static const struct qcom_icc_desc sm8450_system_noc = {
 	.num_bcms = ARRAY_SIZE(system_noc_bcms),
 };
 
-static int qnoc_probe(struct platform_device *pdev)
-{
-	const struct qcom_icc_desc *desc;
-	struct icc_onecell_data *data;
-	struct icc_provider *provider;
-	struct qcom_icc_node * const *qnodes;
-	struct qcom_icc_provider *qp;
-	struct icc_node *node;
-	size_t num_nodes, i;
-	int ret;
-
-	desc = device_get_match_data(&pdev->dev);
-	if (!desc)
-		return -EINVAL;
-
-	qnodes = desc->nodes;
-	num_nodes = desc->num_nodes;
-
-	qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL);
-	if (!qp)
-		return -ENOMEM;
-
-	data = devm_kcalloc(&pdev->dev, num_nodes, sizeof(*node), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	provider = &qp->provider;
-	provider->dev = &pdev->dev;
-	provider->set = qcom_icc_set;
-	provider->pre_aggregate = qcom_icc_pre_aggregate;
-	provider->aggregate = qcom_icc_aggregate;
-	provider->xlate_extended = qcom_icc_xlate_extended;
-	INIT_LIST_HEAD(&provider->nodes);
-	provider->data = data;
-
-	qp->dev = &pdev->dev;
-	qp->bcms = desc->bcms;
-	qp->num_bcms = desc->num_bcms;
-
-	qp->voter = of_bcm_voter_get(qp->dev, NULL);
-	if (IS_ERR(qp->voter))
-		return PTR_ERR(qp->voter);
-
-	ret = icc_provider_add(provider);
-	if (ret) {
-		dev_err(&pdev->dev, "error adding interconnect provider\n");
-		return ret;
-	}
-
-	for (i = 0; i < qp->num_bcms; i++)
-		qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
-
-	for (i = 0; i < num_nodes; i++) {
-		size_t j;
-
-		if (!qnodes[i])
-			continue;
-
-		node = icc_node_create(qnodes[i]->id);
-		if (IS_ERR(node)) {
-			ret = PTR_ERR(node);
-			goto err;
-		}
-
-		node->name = qnodes[i]->name;
-		node->data = qnodes[i];
-		icc_node_add(node, provider);
-
-		for (j = 0; j < qnodes[i]->num_links; j++)
-			icc_link_create(node, qnodes[i]->links[j]);
-
-		data->nodes[i] = node;
-	}
-	data->num_nodes = num_nodes;
-
-	platform_set_drvdata(pdev, qp);
-
-	return 0;
-err:
-	icc_nodes_remove(provider);
-	icc_provider_del(provider);
-	return ret;
-}
-
-static int qnoc_remove(struct platform_device *pdev)
-{
-	struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
-
-	icc_nodes_remove(&qp->provider);
-	icc_provider_del(&qp->provider);
-
-	return 0;
-}
-
 static const struct of_device_id qnoc_of_match[] = {
 	{ .compatible = "qcom,sm8450-aggre1-noc",
 	  .data = &sm8450_aggre1_noc},
@@ -1966,8 +1872,8 @@ static const struct of_device_id qnoc_of_match[] = {
 MODULE_DEVICE_TABLE(of, qnoc_of_match);
 
 static struct platform_driver qnoc_driver = {
-	.probe = qnoc_probe,
-	.remove = qnoc_remove,
+	.probe = qcom_icc_rpmh_probe,
+	.remove = qcom_icc_rpmh_remove,
 	.driver = {
 		.name = "qnoc-sm8450",
 		.of_match_table = qnoc_of_match,
-- 
2.39.2

[PATCH 6.1 003/224] interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT

[Greg Kroah-Hartman]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 633a12fda6536a1a17bcea29502e777e86a4547e ]

Due to what seems to be a copy-paste error, the _NRT master was
identical to the _RT master, which should not be the case.. Fix it
using the values available from the downstream kernel [1].

[1] https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/heads/android-msm-bramble-4.19-android11-qpr1/qcom/scuba-bus.dtsi#127
Fixes: 1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20230103142120.15605-1-konrad.dybcio@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/interconnect/qcom/qcm2290.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/interconnect/qcom/qcm2290.c b/drivers/interconnect/qcom/qcm2290.c
index 0da612d6398c5..a29cdb4fac03f 100644
--- a/drivers/interconnect/qcom/qcm2290.c
+++ b/drivers/interconnect/qcom/qcm2290.c
@@ -147,9 +147,9 @@ static struct qcom_icc_node mas_snoc_bimc_nrt = {
 	.name = "mas_snoc_bimc_nrt",
 	.buswidth = 16,
 	.qos.ap_owned = true,
-	.qos.qos_port = 2,
+	.qos.qos_port = 3,
 	.qos.qos_mode = NOC_QOS_MODE_BYPASS,
-	.mas_rpm_id = 163,
+	.mas_rpm_id = 164,
 	.slv_rpm_id = -1,
 	.num_links = ARRAY_SIZE(mas_snoc_bimc_nrt_links),
 	.links = mas_snoc_bimc_nrt_links,
-- 
2.39.2

[PATCH 6.1 004/224] perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output

[Greg Kroah-Hartman]

From: Yang Jihong <yangjihong1@huawei.com>

[ Upstream commit eb81a2ed4f52be831c9fb879752d89645a312c13 ]

syzkaller reportes a KASAN issue with stack-out-of-bounds.
The call trace is as follows:
  dump_stack+0x9c/0xd3
  print_address_description.constprop.0+0x19/0x170
  __kasan_report.cold+0x6c/0x84
  kasan_report+0x3a/0x50
  __perf_event_header__init_id+0x34/0x290
  perf_event_header__init_id+0x48/0x60
  perf_output_begin+0x4a4/0x560
  perf_event_bpf_output+0x161/0x1e0
  perf_iterate_sb_cpu+0x29e/0x340
  perf_iterate_sb+0x4c/0xc0
  perf_event_bpf_event+0x194/0x2c0
  __bpf_prog_put.constprop.0+0x55/0xf0
  __cls_bpf_delete_prog+0xea/0x120 [cls_bpf]
  cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf]
  process_one_work+0x3c2/0x730
  worker_thread+0x93/0x650
  kthread+0x1b8/0x210
  ret_from_fork+0x1f/0x30

commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()")
use on-stack struct perf_sample_data of the caller function.

However, perf_event_bpf_output uses incorrect parameter to convert
small-sized data (struct perf_bpf_event) into large-sized data
(struct perf_sample_data), which causes memory overwriting occurs in
__perf_event_header__init_id.

Fixes: 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230314044735.56551-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 227ada7240295..6c4e78cd7a8b5 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -9009,7 +9009,7 @@ static void perf_event_bpf_output(struct perf_event *event, void *data)
 
 	perf_event_header__init_id(&bpf_event->event_id.header,
 				   &sample, event);
-	ret = perf_output_begin(&handle, data, event,
+	ret = perf_output_begin(&handle, &sample, event,
 				bpf_event->event_id.header.size);
 	if (ret)
 		return;
-- 
2.39.2

[PATCH 6.1 005/224] perf: fix perf_event_context->time

[Greg Kroah-Hartman]

From: Song Liu <song@kernel.org>

[ Upstream commit baf1b12a67f5b24f395baca03e442ce27cab0c18 ]

Time readers rely on perf_event_context->[time|timestamp|timeoffset] to get
accurate time_enabled and time_running for an event. The difference between
ctx->timestamp and ctx->time is the among of time when the context is not
enabled. __update_context_time(ctx, false) is used to increase timestamp,
but not time. Therefore, it should only be called in ctx_sched_in() when
EVENT_TIME was not enabled.

Fixes: 09f5e7dc7ad7 ("perf: Fix perf_event_read_local() time")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20230313171608.298734-1-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 6c4e78cd7a8b5..2aa286b4151b3 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3830,7 +3830,7 @@ ctx_sched_in(struct perf_event_context *ctx,
 	if (likely(!ctx->nr_events))
 		return;
 
-	if (is_active ^ EVENT_TIME) {
+	if (!(is_active & EVENT_TIME)) {
 		/* start ctx time */
 		__update_context_time(ctx, false);
 		perf_cgroup_set_timestamp(cpuctx);
-- 
2.39.2

[PATCH 6.1 006/224] tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr

[Greg Kroah-Hartman]

From: Costa Shulyupin <costa.shul@redhat.com>

[ Upstream commit 71c7a30442b724717a30d5e7d1662ba4904eb3d4 ]

There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.

Test case:

  # cd /sys/kernel/tracing
  # echo 0 > tracing_on
  # echo round-robin > hwlat_detector/mode
  # echo hwlat > current_tracer
  # unshare --fork --pid bash -c 'echo 1 > tracing_on'
  # dmesg -c

Actual behavior:

[573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none

Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0330f7aa8ee63 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_hwlat.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/trace/trace_hwlat.c b/kernel/trace/trace_hwlat.c
index c4945f8adc119..2f37a6e68aa9f 100644
--- a/kernel/trace/trace_hwlat.c
+++ b/kernel/trace/trace_hwlat.c
@@ -339,7 +339,7 @@ static void move_to_next_cpu(void)
 	cpumask_clear(current_mask);
 	cpumask_set_cpu(next_cpu, current_mask);
 
-	sched_setaffinity(0, current_mask);
+	set_cpus_allowed_ptr(current, current_mask);
 	return;
 
  change_mode:
@@ -446,7 +446,7 @@ static int start_single_kthread(struct trace_array *tr)
 
 	}
 
-	sched_setaffinity(kthread->pid, current_mask);
+	set_cpus_allowed_ptr(kthread, current_mask);
 
 	kdata->kthread = kthread;
 	wake_up_process(kthread);
-- 
2.39.2

[PATCH 6.1 007/224] drm/amd/display: Include virtual signal to set k1 and k2 values

[Greg Kroah-Hartman]

From: Eric Bernstein <eric.bernstein@amd.com>

[ Upstream commit 368307cef69ccd9bf5511f25e58e3a103be169fb ]

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 709671ffb15d ("drm/amd/display: Remove OTG DIV register write for Virtual signals.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index d0b46a3e01551..f31d8efadeb75 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -1180,7 +1180,7 @@ unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsign
 			*k2_div = PIXEL_RATE_DIV_BY_2;
 		else
 			*k2_div = PIXEL_RATE_DIV_BY_4;
-	} else if (dc_is_dp_signal(pipe_ctx->stream->signal)) {
+	} else if (dc_is_dp_signal(pipe_ctx->stream->signal) || dc_is_virtual_signal(pipe_ctx->stream->signal)) {
 		if (two_pix_per_container) {
 			*k1_div = PIXEL_RATE_DIV_BY_1;
 			*k2_div = PIXEL_RATE_DIV_BY_2;
-- 
2.39.2

[PATCH 6.1 008/224] drm/amd/display: fix k1 k2 divider programming for phantom streams

[Greg Kroah-Hartman]

From: Aurabindo Pillai <aurabindo.pillai@amd.com>

[ Upstream commit 3b214bb7185d8284d7d4c53e15127f69a375abf6 ]

[Why & How]
When k1 and k2 divider programming logic is executed for a phantom
stream, the corresponding master stream should be used for the
calculation. Fix the if condition to use the master stream for checking
signal type instead of the phantom stream.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 709671ffb15d ("drm/amd/display: Remove OTG DIV register write for Virtual signals.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index f31d8efadeb75..f108e82e70c8b 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -1174,13 +1174,13 @@ unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsign
 	if (is_dp_128b_132b_signal(pipe_ctx)) {
 		*k1_div = PIXEL_RATE_DIV_BY_1;
 		*k2_div = PIXEL_RATE_DIV_BY_1;
-	} else if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal) || dc_is_dvi_signal(pipe_ctx->stream->signal)) {
+	} else if (dc_is_hdmi_tmds_signal(stream->signal) || dc_is_dvi_signal(stream->signal)) {
 		*k1_div = PIXEL_RATE_DIV_BY_1;
 		if (stream->timing.pixel_encoding == PIXEL_ENCODING_YCBCR420)
 			*k2_div = PIXEL_RATE_DIV_BY_2;
 		else
 			*k2_div = PIXEL_RATE_DIV_BY_4;
-	} else if (dc_is_dp_signal(pipe_ctx->stream->signal) || dc_is_virtual_signal(pipe_ctx->stream->signal)) {
+	} else if (dc_is_dp_signal(stream->signal) || dc_is_virtual_signal(stream->signal)) {
 		if (two_pix_per_container) {
 			*k1_div = PIXEL_RATE_DIV_BY_1;
 			*k2_div = PIXEL_RATE_DIV_BY_2;
-- 
2.39.2

[PATCH 6.1 009/224] drm/amd/display: Remove OTG DIV register write for Virtual signals.

[Greg Kroah-Hartman]

From: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>

[ Upstream commit 709671ffb15dcd1b4f6afe2a9d8c67c7c4ead4a1 ]

[WHY]
Hot plugging and then hot unplugging leads to k1 and k2 values to
change, as signal is detected as a virtual signal on hot unplug. Writing
these values to OTG_PIXEL_RATE_DIV register might cause primary display
to blank (known hw bug).

[HOW]
No longer write k1 and k2 values to register if signal is virtual, we
have safe guards in place in the case that k1 and k2 is unassigned so
that an unknown value is not written to the register either.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
index f108e82e70c8b..1a85509c12f23 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c
@@ -1180,7 +1180,7 @@ unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsign
 			*k2_div = PIXEL_RATE_DIV_BY_2;
 		else
 			*k2_div = PIXEL_RATE_DIV_BY_4;
-	} else if (dc_is_dp_signal(stream->signal) || dc_is_virtual_signal(stream->signal)) {
+	} else if (dc_is_dp_signal(stream->signal)) {
 		if (two_pix_per_container) {
 			*k1_div = PIXEL_RATE_DIV_BY_1;
 			*k2_div = PIXEL_RATE_DIV_BY_2;
-- 
2.39.2

[PATCH 6.1 010/224] mptcp: refactor passive socket initialization

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 3a236aef280ed5122b2d47087eb514d0921ae033 ]

After commit 30e51b923e43 ("mptcp: fix unreleased socket in accept queue")
unaccepted msk sockets go throu complete shutdown, we don't need anymore
to delay inserting the first subflow into the subflow lists.

The reference counting deserve some extra care, as __mptcp_close() is
unaware of the request socket linkage to the first subflow.

Please note that this is more a refactoring than a fix but because this
modification is needed to include other corrections, see the following
commits. Then a Fixes tag has been added here to help the stable team.

Fixes: 30e51b923e43 ("mptcp: fix unreleased socket in accept queue")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/protocol.c | 17 -----------------
 net/mptcp/subflow.c  | 27 +++++++++++++++++++++------
 2 files changed, 21 insertions(+), 23 deletions(-)

diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index 938cccab331dd..777f795246ed2 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -834,7 +834,6 @@ static bool __mptcp_finish_join(struct mptcp_sock *msk, struct sock *ssk)
 	if (sk->sk_socket && !ssk->sk_socket)
 		mptcp_sock_graft(ssk, sk->sk_socket);
 
-	mptcp_propagate_sndbuf((struct sock *)msk, ssk);
 	mptcp_sockopt_sync_locked(msk, ssk);
 	return true;
 }
@@ -3729,22 +3728,6 @@ static int mptcp_stream_accept(struct socket *sock, struct socket *newsock,
 
 		lock_sock(newsk);
 
-		/* PM/worker can now acquire the first subflow socket
-		 * lock without racing with listener queue cleanup,
-		 * we can notify it, if needed.
-		 *
-		 * Even if remote has reset the initial subflow by now
-		 * the refcnt is still at least one.
-		 */
-		subflow = mptcp_subflow_ctx(msk->first);
-		list_add(&subflow->node, &msk->conn_list);
-		sock_hold(msk->first);
-		if (mptcp_is_fully_established(newsk))
-			mptcp_pm_fully_established(msk, msk->first, GFP_KERNEL);
-
-		mptcp_rcv_space_init(msk, msk->first);
-		mptcp_propagate_sndbuf(newsk, msk->first);
-
 		/* set ssk->sk_socket of accept()ed flows to mptcp socket.
 		 * This is needed so NOSPACE flag can be set from tcp stack.
 		 */
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index 1e10a38ccf9d0..fe815103060c6 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -355,6 +355,12 @@ void mptcp_subflow_reset(struct sock *ssk)
 	struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
 	struct sock *sk = subflow->conn;
 
+	/* mptcp_mp_fail_no_response() can reach here on an already closed
+	 * socket
+	 */
+	if (ssk->sk_state == TCP_CLOSE)
+		return;
+
 	/* must hold: tcp_done() could drop last reference on parent */
 	sock_hold(sk);
 
@@ -685,6 +691,7 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 	struct mptcp_options_received mp_opt;
 	bool fallback, fallback_is_fatal;
 	struct sock *new_msk = NULL;
+	struct mptcp_sock *owner;
 	struct sock *child;
 
 	pr_debug("listener=%p, req=%p, conn=%p", listener, req, listener->conn);
@@ -759,6 +766,8 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 		ctx->setsockopt_seq = listener->setsockopt_seq;
 
 		if (ctx->mp_capable) {
+			owner = mptcp_sk(new_msk);
+
 			/* this can't race with mptcp_close(), as the msk is
 			 * not yet exposted to user-space
 			 */
@@ -767,14 +776,14 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 			/* record the newly created socket as the first msk
 			 * subflow, but don't link it yet into conn_list
 			 */
-			WRITE_ONCE(mptcp_sk(new_msk)->first, child);
+			WRITE_ONCE(owner->first, child);
 
 			/* new mpc subflow takes ownership of the newly
 			 * created mptcp socket
 			 */
 			mptcp_sk(new_msk)->setsockopt_seq = ctx->setsockopt_seq;
-			mptcp_pm_new_connection(mptcp_sk(new_msk), child, 1);
-			mptcp_token_accept(subflow_req, mptcp_sk(new_msk));
+			mptcp_pm_new_connection(owner, child, 1);
+			mptcp_token_accept(subflow_req, owner);
 			ctx->conn = new_msk;
 			new_msk = NULL;
 
@@ -782,15 +791,21 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 			 * uses the correct data
 			 */
 			mptcp_copy_inaddrs(ctx->conn, child);
+			mptcp_propagate_sndbuf(ctx->conn, child);
+
+			mptcp_rcv_space_init(owner, child);
+			list_add(&ctx->node, &owner->conn_list);
+			sock_hold(child);
 
 			/* with OoO packets we can reach here without ingress
 			 * mpc option
 			 */
-			if (mp_opt.suboptions & OPTIONS_MPTCP_MPC)
+			if (mp_opt.suboptions & OPTIONS_MPTCP_MPC) {
 				mptcp_subflow_fully_established(ctx, &mp_opt);
+				mptcp_pm_fully_established(owner, child, GFP_ATOMIC);
+				ctx->pm_notified = 1;
+			}
 		} else if (ctx->mp_join) {
-			struct mptcp_sock *owner;
-
 			owner = subflow_req->msk;
 			if (!owner) {
 				subflow_add_reset_reason(skb, MPTCP_RST_EPROHIBIT);
-- 
2.39.2

[PATCH 6.1 011/224] mptcp: use the workqueue to destroy unaccepted sockets

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit b6985b9b82954caa53f862d6059d06c0526254f0 ]

  Backports notes: one simple conflict in net/mptcp/protocol.c with:

    commit a5ef058dc4d9 ("net: introduce and use custom sockopt socket flag")

  Where the two commits add a new line for different actions in the same
  context in mptcp_stream_accept().

Christoph reported a UaF at token lookup time after having
refactored the passive socket initialization part:

  BUG: KASAN: use-after-free in __token_bucket_busy+0x253/0x260
  Read of size 4 at addr ffff88810698d5b0 by task syz-executor653/3198

  CPU: 1 PID: 3198 Comm: syz-executor653 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x6e/0x91
   print_report+0x16a/0x46f
   kasan_report+0xad/0x130
   __token_bucket_busy+0x253/0x260
   mptcp_token_new_connect+0x13d/0x490
   mptcp_connect+0x4ed/0x860
   __inet_stream_connect+0x80e/0xd90
   tcp_sendmsg_fastopen+0x3ce/0x710
   mptcp_sendmsg+0xff1/0x1a20
   inet_sendmsg+0x11d/0x140
   __sys_sendto+0x405/0x490
   __x64_sys_sendto+0xdc/0x1b0
   do_syscall_64+0x3b/0x90
   entry_SYSCALL_64_after_hwframe+0x72/0xdc

We need to properly clean-up all the paired MPTCP-level
resources and be sure to release the msk last, even when
the unaccepted subflow is destroyed by the TCP internals
via inet_child_forget().

We can re-use the existing MPTCP_WORK_CLOSE_SUBFLOW infra,
explicitly checking that for the critical scenario: the
closed subflow is the MPC one, the msk is not accepted and
eventually going through full cleanup.

With such change, __mptcp_destroy_sock() is always called
on msk sockets, even on accepted ones. We don't need anymore
to transiently drop one sk reference at msk clone time.

Please note this commit depends on the parent one:

  mptcp: refactor passive socket initialization

Fixes: 58b09919626b ("mptcp: create msk early")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/347
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/protocol.c | 41 +++++++++++++++++++++++++++++++----------
 net/mptcp/protocol.h |  5 ++++-
 net/mptcp/subflow.c  | 17 ++++++++++++-----
 3 files changed, 47 insertions(+), 16 deletions(-)

diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index 777f795246ed2..b679e8a430a83 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -2357,7 +2357,6 @@ static void __mptcp_close_ssk(struct sock *sk, struct sock *ssk,
 		goto out;
 	}
 
-	sock_orphan(ssk);
 	subflow->disposable = 1;
 
 	/* if ssk hit tcp_done(), tcp_cleanup_ulp() cleared the related ops
@@ -2365,7 +2364,20 @@ static void __mptcp_close_ssk(struct sock *sk, struct sock *ssk,
 	 * reference owned by msk;
 	 */
 	if (!inet_csk(ssk)->icsk_ulp_ops) {
+		WARN_ON_ONCE(!sock_flag(ssk, SOCK_DEAD));
 		kfree_rcu(subflow, rcu);
+	} else if (msk->in_accept_queue && msk->first == ssk) {
+		/* if the first subflow moved to a close state, e.g. due to
+		 * incoming reset and we reach here before inet_child_forget()
+		 * the TCP stack could later try to close it via
+		 * inet_csk_listen_stop(), or deliver it to the user space via
+		 * accept().
+		 * We can't delete the subflow - or risk a double free - nor let
+		 * the msk survive - or will be leaked in the non accept scenario:
+		 * fallback and let TCP cope with the subflow cleanup.
+		 */
+		WARN_ON_ONCE(sock_flag(ssk, SOCK_DEAD));
+		mptcp_subflow_drop_ctx(ssk);
 	} else {
 		/* otherwise tcp will dispose of the ssk and subflow ctx */
 		if (ssk->sk_state == TCP_LISTEN) {
@@ -2412,9 +2424,10 @@ static unsigned int mptcp_sync_mss(struct sock *sk, u32 pmtu)
 	return 0;
 }
 
-static void __mptcp_close_subflow(struct mptcp_sock *msk)
+static void __mptcp_close_subflow(struct sock *sk)
 {
 	struct mptcp_subflow_context *subflow, *tmp;
+	struct mptcp_sock *msk = mptcp_sk(sk);
 
 	might_sleep();
 
@@ -2428,7 +2441,15 @@ static void __mptcp_close_subflow(struct mptcp_sock *msk)
 		if (!skb_queue_empty_lockless(&ssk->sk_receive_queue))
 			continue;
 
-		mptcp_close_ssk((struct sock *)msk, ssk, subflow);
+		mptcp_close_ssk(sk, ssk, subflow);
+	}
+
+	/* if the MPC subflow has been closed before the msk is accepted,
+	 * msk will never be accept-ed, close it now
+	 */
+	if (!msk->first && msk->in_accept_queue) {
+		sock_set_flag(sk, SOCK_DEAD);
+		inet_sk_state_store(sk, TCP_CLOSE);
 	}
 }
 
@@ -2637,6 +2658,9 @@ static void mptcp_worker(struct work_struct *work)
 	__mptcp_check_send_data_fin(sk);
 	mptcp_check_data_fin(sk);
 
+	if (test_and_clear_bit(MPTCP_WORK_CLOSE_SUBFLOW, &msk->flags))
+		__mptcp_close_subflow(sk);
+
 	/* There is no point in keeping around an orphaned sk timedout or
 	 * closed, but we need the msk around to reply to incoming DATA_FIN,
 	 * even if it is orphaned and in FIN_WAIT2 state
@@ -2652,9 +2676,6 @@ static void mptcp_worker(struct work_struct *work)
 		}
 	}
 
-	if (test_and_clear_bit(MPTCP_WORK_CLOSE_SUBFLOW, &msk->flags))
-		__mptcp_close_subflow(msk);
-
 	if (test_and_clear_bit(MPTCP_WORK_RTX, &msk->flags))
 		__mptcp_retrans(sk);
 
@@ -3084,6 +3105,7 @@ struct sock *mptcp_sk_clone(const struct sock *sk,
 	msk->local_key = subflow_req->local_key;
 	msk->token = subflow_req->token;
 	msk->subflow = NULL;
+	msk->in_accept_queue = 1;
 	WRITE_ONCE(msk->fully_established, false);
 	if (mp_opt->suboptions & OPTION_MPTCP_CSUMREQD)
 		WRITE_ONCE(msk->csum_enabled, true);
@@ -3110,8 +3132,7 @@ struct sock *mptcp_sk_clone(const struct sock *sk,
 	security_inet_csk_clone(nsk, req);
 	bh_unlock_sock(nsk);
 
-	/* keep a single reference */
-	__sock_put(nsk);
+	/* note: the newly allocated socket refcount is 2 now */
 	return nsk;
 }
 
@@ -3167,8 +3188,6 @@ static struct sock *mptcp_accept(struct sock *sk, int flags, int *err,
 			goto out;
 		}
 
-		/* acquire the 2nd reference for the owning socket */
-		sock_hold(new_mptcp_sock);
 		newsk = new_mptcp_sock;
 		MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_MPCAPABLEPASSIVEACK);
 	} else {
@@ -3726,6 +3745,8 @@ static int mptcp_stream_accept(struct socket *sock, struct socket *newsock,
 		struct mptcp_subflow_context *subflow;
 		struct sock *newsk = newsock->sk;
 
+		msk->in_accept_queue = 0;
+
 		lock_sock(newsk);
 
 		/* set ssk->sk_socket of accept()ed flows to mptcp socket.
diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index 6f22ae13c9848..2cddd5b52e8fa 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -286,7 +286,8 @@ struct mptcp_sock {
 	u8		recvmsg_inq:1,
 			cork:1,
 			nodelay:1,
-			fastopening:1;
+			fastopening:1,
+			in_accept_queue:1;
 	int		connect_flags;
 	struct work_struct work;
 	struct sk_buff  *ooo_last_skb;
@@ -651,6 +652,8 @@ void mptcp_subflow_set_active(struct mptcp_subflow_context *subflow);
 
 bool mptcp_subflow_active(struct mptcp_subflow_context *subflow);
 
+void mptcp_subflow_drop_ctx(struct sock *ssk);
+
 static inline void mptcp_subflow_tcp_fallback(struct sock *sk,
 					      struct mptcp_subflow_context *ctx)
 {
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index fe815103060c6..459621a0410cd 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -636,9 +636,10 @@ static bool subflow_hmac_valid(const struct request_sock *req,
 
 static void mptcp_force_close(struct sock *sk)
 {
-	/* the msk is not yet exposed to user-space */
+	/* the msk is not yet exposed to user-space, and refcount is 2 */
 	inet_sk_state_store(sk, TCP_CLOSE);
 	sk_common_release(sk);
+	sock_put(sk);
 }
 
 static void subflow_ulp_fallback(struct sock *sk,
@@ -654,7 +655,7 @@ static void subflow_ulp_fallback(struct sock *sk,
 	mptcp_subflow_ops_undo_override(sk);
 }
 
-static void subflow_drop_ctx(struct sock *ssk)
+void mptcp_subflow_drop_ctx(struct sock *ssk)
 {
 	struct mptcp_subflow_context *ctx = mptcp_subflow_ctx(ssk);
 
@@ -758,7 +759,7 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 
 			if (new_msk)
 				mptcp_copy_inaddrs(new_msk, child);
-			subflow_drop_ctx(child);
+			mptcp_subflow_drop_ctx(child);
 			goto out;
 		}
 
@@ -849,7 +850,7 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk,
 	return child;
 
 dispose_child:
-	subflow_drop_ctx(child);
+	mptcp_subflow_drop_ctx(child);
 	tcp_rsk(req)->drop_req = true;
 	inet_csk_prepare_for_destroy_sock(child);
 	tcp_done(child);
@@ -1804,7 +1805,6 @@ void mptcp_subflow_queue_clean(struct sock *listener_sk, struct sock *listener_s
 		struct sock *sk = (struct sock *)msk;
 		bool do_cancel_work;
 
-		sock_hold(sk);
 		lock_sock_nested(sk, SINGLE_DEPTH_NESTING);
 		next = msk->dl_next;
 		msk->first = NULL;
@@ -1892,6 +1892,13 @@ static void subflow_ulp_release(struct sock *ssk)
 		 * when the subflow is still unaccepted
 		 */
 		release = ctx->disposable || list_empty(&ctx->node);
+
+		/* inet_child_forget() does not call sk_state_change(),
+		 * explicitly trigger the socket close machinery
+		 */
+		if (!release && !test_and_set_bit(MPTCP_WORK_CLOSE_SUBFLOW,
+						  &mptcp_sk(sk)->flags))
+			mptcp_schedule_work(sk);
 		sock_put(sk);
 	}
 
-- 
2.39.2

[PATCH 6.1 012/224] mptcp: fix UaF in listener shutdown

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 0a3f4f1f9c27215e4ddcd312558342e57b93e518 ]

  Backports notes: one simple conflict in net/mptcp/protocol.c with:

    commit f8c9dfbd875b ("mptcp: add pm listener events")

  Where one commit removes code in __mptcp_close_ssk() while the other
  one adds one line at the same place. We can simply remove the whole
  condition because this extra instruction is not present in v6.1.

As reported by Christoph after having refactored the passive
socket initialization, the mptcp listener shutdown path is prone
to an UaF issue.

  BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x73/0xe0
  Write of size 4 at addr ffff88810cb23098 by task syz-executor731/1266

  CPU: 1 PID: 1266 Comm: syz-executor731 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x6e/0x91
   print_report+0x16a/0x46f
   kasan_report+0xad/0x130
   kasan_check_range+0x14a/0x1a0
   _raw_spin_lock_bh+0x73/0xe0
   subflow_error_report+0x6d/0x110
   sk_error_report+0x3b/0x190
   tcp_disconnect+0x138c/0x1aa0
   inet_child_forget+0x6f/0x2e0
   inet_csk_listen_stop+0x209/0x1060
   __mptcp_close_ssk+0x52d/0x610
   mptcp_destroy_common+0x165/0x640
   mptcp_destroy+0x13/0x80
   __mptcp_destroy_sock+0xe7/0x270
   __mptcp_close+0x70e/0x9b0
   mptcp_close+0x2b/0x150
   inet_release+0xe9/0x1f0
   __sock_release+0xd2/0x280
   sock_close+0x15/0x20
   __fput+0x252/0xa20
   task_work_run+0x169/0x250
   exit_to_user_mode_prepare+0x113/0x120
   syscall_exit_to_user_mode+0x1d/0x40
   do_syscall_64+0x48/0x90
   entry_SYSCALL_64_after_hwframe+0x72/0xdc

The msk grace period can legitly expire in between the last
reference count dropped in mptcp_subflow_queue_clean() and
the later eventual access in inet_csk_listen_stop()

After the previous patch we don't need anymore special-casing
msk listener socket cleanup: the mptcp worker will process each
of the unaccepted msk sockets.

Just drop the now unnecessary code.

Please note this commit depends on the two parent ones:

  mptcp: refactor passive socket initialization
  mptcp: use the workqueue to destroy unaccepted sockets

Fixes: 6aeed9045071 ("mptcp: fix race on unaccepted mptcp sockets")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/346
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/protocol.c |  5 ---
 net/mptcp/protocol.h |  1 -
 net/mptcp/subflow.c  | 72 --------------------------------------------
 3 files changed, 78 deletions(-)

diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index b679e8a430a83..f0cde2d7233dc 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -2380,11 +2380,6 @@ static void __mptcp_close_ssk(struct sock *sk, struct sock *ssk,
 		mptcp_subflow_drop_ctx(ssk);
 	} else {
 		/* otherwise tcp will dispose of the ssk and subflow ctx */
-		if (ssk->sk_state == TCP_LISTEN) {
-			tcp_set_state(ssk, TCP_CLOSE);
-			mptcp_subflow_queue_clean(sk, ssk);
-			inet_csk_listen_stop(ssk);
-		}
 		__tcp_close(ssk, 0);
 
 		/* close acquired an extra ref */
diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index 2cddd5b52e8fa..051e8022d6611 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -615,7 +615,6 @@ void mptcp_close_ssk(struct sock *sk, struct sock *ssk,
 		     struct mptcp_subflow_context *subflow);
 void __mptcp_subflow_send_ack(struct sock *ssk);
 void mptcp_subflow_reset(struct sock *ssk);
-void mptcp_subflow_queue_clean(struct sock *sk, struct sock *ssk);
 void mptcp_sock_graft(struct sock *sk, struct socket *parent);
 struct socket *__mptcp_nmpc_socket(const struct mptcp_sock *msk);
 bool __mptcp_close(struct sock *sk, long timeout);
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index 459621a0410cd..fc876c2480029 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -1764,78 +1764,6 @@ static void subflow_state_change(struct sock *sk)
 	}
 }
 
-void mptcp_subflow_queue_clean(struct sock *listener_sk, struct sock *listener_ssk)
-{
-	struct request_sock_queue *queue = &inet_csk(listener_ssk)->icsk_accept_queue;
-	struct mptcp_sock *msk, *next, *head = NULL;
-	struct request_sock *req;
-
-	/* build a list of all unaccepted mptcp sockets */
-	spin_lock_bh(&queue->rskq_lock);
-	for (req = queue->rskq_accept_head; req; req = req->dl_next) {
-		struct mptcp_subflow_context *subflow;
-		struct sock *ssk = req->sk;
-		struct mptcp_sock *msk;
-
-		if (!sk_is_mptcp(ssk))
-			continue;
-
-		subflow = mptcp_subflow_ctx(ssk);
-		if (!subflow || !subflow->conn)
-			continue;
-
-		/* skip if already in list */
-		msk = mptcp_sk(subflow->conn);
-		if (msk->dl_next || msk == head)
-			continue;
-
-		msk->dl_next = head;
-		head = msk;
-	}
-	spin_unlock_bh(&queue->rskq_lock);
-	if (!head)
-		return;
-
-	/* can't acquire the msk socket lock under the subflow one,
-	 * or will cause ABBA deadlock
-	 */
-	release_sock(listener_ssk);
-
-	for (msk = head; msk; msk = next) {
-		struct sock *sk = (struct sock *)msk;
-		bool do_cancel_work;
-
-		lock_sock_nested(sk, SINGLE_DEPTH_NESTING);
-		next = msk->dl_next;
-		msk->first = NULL;
-		msk->dl_next = NULL;
-
-		do_cancel_work = __mptcp_close(sk, 0);
-		release_sock(sk);
-		if (do_cancel_work) {
-			/* lockdep will report a false positive ABBA deadlock
-			 * between cancel_work_sync and the listener socket.
-			 * The involved locks belong to different sockets WRT
-			 * the existing AB chain.
-			 * Using a per socket key is problematic as key
-			 * deregistration requires process context and must be
-			 * performed at socket disposal time, in atomic
-			 * context.
-			 * Just tell lockdep to consider the listener socket
-			 * released here.
-			 */
-			mutex_release(&listener_sk->sk_lock.dep_map, _RET_IP_);
-			mptcp_cancel_work(sk);
-			mutex_acquire(&listener_sk->sk_lock.dep_map,
-				      SINGLE_DEPTH_NESTING, 0, _RET_IP_);
-		}
-		sock_put(sk);
-	}
-
-	/* we are still under the listener msk socket lock */
-	lock_sock_nested(listener_ssk, SINGLE_DEPTH_NESTING);
-}
-
 static int subflow_ulp_init(struct sock *sk)
 {
 	struct inet_connection_sock *icsk = inet_csk(sk);
-- 
2.39.2

[PATCH 6.1 013/224] drm/amd/display: Fix DP MST sinks removal issue

[Greg Kroah-Hartman]

From: Cruise Hung <Cruise.Hung@amd.com>

[ Upstream commit cbd6c1b17d3b42b7935526a86ad5f66838767d03 ]

[Why]
In USB4 DP tunneling, it's possible to have this scenario that
the path becomes unavailable and CM tears down the path a little bit late.
So, in this case, the HPD is high but fails to read any DPCD register.
That causes the link connection type to be set to sst.
And not all sinks are removed behind the MST branch.

[How]
Restore the link connection type if it fails to read DPCD register.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cbd6c1b17d3b42b7935526a86ad5f66838767d03)
Modified for stable backport as a lot of the code in this file was moved
in 6.3 to drivers/gpu/drm/amd/display/dc/link/link_detection.c.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 328c5e33cc66b..bf7fcd268cb47 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1016,6 +1016,7 @@ static bool detect_link_and_local_sink(struct dc_link *link,
 	struct dc_sink *prev_sink = NULL;
 	struct dpcd_caps prev_dpcd_caps;
 	enum dc_connection_type new_connection_type = dc_connection_none;
+	enum dc_connection_type pre_connection_type = link->type;
 	const uint32_t post_oui_delay = 30; // 30ms
 
 	DC_LOGGER_INIT(link->ctx->logger);
@@ -1118,6 +1119,8 @@ static bool detect_link_and_local_sink(struct dc_link *link,
 			}
 
 			if (!detect_dp(link, &sink_caps, reason)) {
+				link->type = pre_connection_type;
+
 				if (prev_sink)
 					dc_sink_release(prev_sink);
 				return false;
@@ -1349,6 +1352,8 @@ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason)
 	bool is_delegated_to_mst_top_mgr = false;
 	enum dc_connection_type pre_link_type = link->type;
 
+	DC_LOGGER_INIT(link->ctx->logger);
+
 	is_local_sink_detect_success = detect_link_and_local_sink(link, reason);
 
 	if (is_local_sink_detect_success && link->local_sink)
@@ -1359,6 +1364,10 @@ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason)
 			link->dpcd_caps.is_mst_capable)
 		is_delegated_to_mst_top_mgr = discover_dp_mst_topology(link, reason);
 
+	DC_LOG_DC("%s: link_index=%d is_local_sink_detect_success=%d pre_link_type=%d link_type=%d\n", __func__,
+		 link->link_index, is_local_sink_detect_success, pre_link_type, link->type);
+
+
 	if (is_local_sink_detect_success &&
 			pre_link_type == dc_connection_mst_branch &&
 			link->type != dc_connection_mst_branch)
-- 
2.39.2

[PATCH 6.1 014/224] arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent

[Greg Kroah-Hartman]

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

[ Upstream commit 8ba961d4339c5db0e69ff6627606fe1f34c838e5 ]

The UFS controller on SM8450 supports cache coherency, hence add the
"dma-coherent" property to mark it as such.

Fixes: 07fa917a335e ("arm64: dts: qcom: sm8450: add ufs nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307153201.180626-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index df0d888ffc008..4714d7bf03b9f 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -3104,6 +3104,7 @@ ufs_mem_hc: ufshc@1d84000 {
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
-- 
2.39.2

[PATCH 6.1 015/224] power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition

[Greg Kroah-Hartman]

From: Zheng Wang <zyytlz.wz@163.com>

[ Upstream commit 47c29d69212911f50bdcdd0564b5999a559010d4 ]

In bq24190_probe, &bdi->input_current_limit_work is bound
with bq24190_input_current_limit_work. When external power
changed, it will call bq24190_charger_external_power_changed
 to start the work.

If we remove the module which will call bq24190_remove to make
cleanup, there may be a unfinished work. The possible
sequence is as follows:

CPU0                  CPUc1

                    |bq24190_input_current_limit_work
bq24190_remove      |
power_supply_unregister  |
device_unregister   |
power_supply_dev_release|
kfree(psy)          |
                    |
                    | power_supply_get_property_from_supplier
                    |   //use

Fix it by finishing the work before cleanup in the bq24190_remove

Fixes: 97774672573a ("power_supply: Initialize changed_work before calling device_add")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/bq24190_charger.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index 2274679c5ddd2..d7400b56820d6 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -1906,6 +1906,7 @@ static void bq24190_remove(struct i2c_client *client)
 	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
 	int error;
 
+	cancel_delayed_work_sync(&bdi->input_current_limit_work);
 	error = pm_runtime_resume_and_get(bdi->dev);
 	if (error < 0)
 		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
-- 
2.39.2

[PATCH 6.1 016/224] power: supply: da9150: Fix use after free bug in da9150_charger_remove due to race condition

[Greg Kroah-Hartman]

From: Zheng Wang <zyytlz.wz@163.com>

[ Upstream commit 06615d11cc78162dfd5116efb71f29eb29502d37 ]

In da9150_charger_probe, &charger->otg_work is bound with
da9150_charger_otg_work. da9150_charger_otg_ncb may be
called to start the work.

If we remove the module which will call da9150_charger_remove
to make cleanup, there may be a unfinished work. The possible
sequence is as follows:

Fix it by canceling the work before cleanup in the da9150_charger_remove

CPU0                  CPUc1

                    |da9150_charger_otg_work
da9150_charger_remove      |
power_supply_unregister  |
device_unregister   |
power_supply_dev_release|
kfree(psy)          |
                    |
                    | 	power_supply_changed(charger->usb);
                    |   //use

Fixes: c1a281e34dae ("power: Add support for DA9150 Charger")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/da9150-charger.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/power/supply/da9150-charger.c b/drivers/power/supply/da9150-charger.c
index f9314cc0cd75f..6b987da586556 100644
--- a/drivers/power/supply/da9150-charger.c
+++ b/drivers/power/supply/da9150-charger.c
@@ -662,6 +662,7 @@ static int da9150_charger_remove(struct platform_device *pdev)
 
 	if (!IS_ERR_OR_NULL(charger->usb_phy))
 		usb_unregister_notifier(charger->usb_phy, &charger->otg_nb);
+	cancel_work_sync(&charger->otg_work);
 
 	power_supply_unregister(charger->battery);
 	power_supply_unregister(charger->usb);
-- 
2.39.2

[PATCH 6.1 017/224] arm64: dts: imx8dxl-evk: Disable hibernation mode of AR8031 for EQOS

[Greg Kroah-Hartman]

From: Wei Fang <wei.fang@nxp.com>

[ Upstream commit 0deefb5bd1382aae0aed7c8b266d5088a5308a26 ]

The hibernation mode of AR8031 PHY defaults to be enabled after hardware
reset. When the cable is unplugged, the PHY will enter hibernation mode
after about 10 senconds and the PHY clocks will be stopped to save
power. However, due to the design of EQOS, the mac needs the RX_CLK of
PHY for software reset to complete. Otherwise the software reset of EQOS
will be failed and do not work correctly. The only way is to disable
hibernation mode of AR8031 PHY for EQOS, the "qca,disable-hibernation-mode"
property is used for this purpose and has already been submitted to the
upstream, for more details please refer to the below link:
https://lore.kernel.org/netdev/20220818030054.1010660-2-wei.fang@nxp.com/

This issue is easy to reproduce, just unplug the cable and "ifconfig eth0
down", after about 10 senconds, then "ifconfig eth0 up", you will see
failure log on the serial port. The log is shown as following:
root@imx8dxlevk:~#
[34.941970] imx-dwmac 5b050000.ethernet eth0: Link is Down
root@imx8dxlevk:~# ifconfig eth0 down
[35.437814] imx-dwmac 5b050000.ethernet eth0: FPE workqueue stop
[35.507913] imx-dwmac 5b050000.ethernet eth0: PHY [stmmac-1:00] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[35.518613] imx-dwmac 5b050000.ethernet eth0: configuring for phy/rgmii-id link mode
root@imx8dxlevk:~# ifconfig eth0 up
[71.143044] imx-dwmac 5b050000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[71.215855] imx-dwmac 5b050000.ethernet eth0: PHY [stmmac-1:00] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[72.230417] imx-dwmac 5b050000.ethernet: Failed to reset the dma
[72.236512] imx-dwmac 5b050000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[72.245258] imx-dwmac 5b050000.ethernet eth0: __stmmac_open: Hw setup failed
SIOCSIFFLAGS: Connection timed out

After applying this patch, the software reset of EQOS will be
successful. And the log is shown as below.
root@imx8dxlevk:~# ifconfig eth0 up
[96.114344] imx-dwmac 5b050000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[96.171466] imx-dwmac 5b050000.ethernet eth0: PHY [stmmac-1:00] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[96.188883] imx-dwmac 5b050000.ethernet eth0: No Safety Features support found
[96.196221] imx-dwmac 5b050000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[96.204846] imx-dwmac 5b050000.ethernet eth0: registered PTP clock
[96.225558] imx-dwmac 5b050000.ethernet eth0: FPE workqueue start
[96.236858] imx-dwmac 5b050000.ethernet eth0: configuring for phy/rgmii-id link mode
[96.249358] 8021q: adding VLAN 0 to HW filter on device eth0

Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: feafeb53140a ("arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index ca2a43e0cbf61..96f5947ed5f41 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -113,6 +113,7 @@ ethphy0: ethernet-phy@0 {
 			reg = <0>;
 			eee-broken-1000t;
 			qca,disable-smarteee;
+			qca,disable-hibernation-mode;
 			vddio-supply = <&vddio0>;
 
 			vddio0: vddio-regulator {
-- 
2.39.2

[PATCH 6.1 018/224] arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio

[Greg Kroah-Hartman]

From: Andrew Halaney <ahalaney@redhat.com>

[ Upstream commit feafeb53140af3cde3fba46b292b15b3a0c0635c ]

The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:

    ./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
        From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml

Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.

Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 96f5947ed5f41..3af4c76369741 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -99,8 +99,6 @@ &eqos {
 	phy-handle = <&ethphy0>;
 	nvmem-cells = <&fec_mac1>;
 	nvmem-cell-names = "mac-address";
-	snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
-	snps,reset-delays-us = <10 20 200000>;
 	status = "okay";
 
 	mdio {
@@ -114,6 +112,9 @@ ethphy0: ethernet-phy@0 {
 			eee-broken-1000t;
 			qca,disable-smarteee;
 			qca,disable-hibernation-mode;
+			reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
 			vddio-supply = <&vddio0>;
 
 			vddio0: vddio-regulator {
-- 
2.39.2

[PATCH 6.1 019/224] ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl

[Greg Kroah-Hartman]

From: Peng Fan <peng.fan@nxp.com>

[ Upstream commit 3d37f7685d525e58674c23d607020e66d501dcd1 ]

usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: 3bb3fd856505 ("ARM: dts: add Netronix E70K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/e70k02.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi
index 27ef9a62b23cf..a1f9fbd6004aa 100644
--- a/arch/arm/boot/dts/e70k02.dtsi
+++ b/arch/arm/boot/dts/e70k02.dtsi
@@ -312,6 +312,7 @@ &usdhc3 {
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
-- 
2.39.2

[PATCH 6.1 020/224] ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl

[Greg Kroah-Hartman]

From: Peng Fan <peng.fan@nxp.com>

[ Upstream commit 957c04e9784c7c757e8cc293d7fb2a60cdf461b6 ]

usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/e60k02.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 935e2359f8dfa..07ae964863850 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -302,6 +302,7 @@ &usdhc3 {
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
-- 
2.39.2

[PATCH 6.1 021/224] ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl

[Greg Kroah-Hartman]

From: Peng Fan <peng.fan@nxp.com>

[ Upstream commit 1cd489e1ada1cffa56bd06fd4609f5a60a985d43 ]

usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: 9c7016f1ca6d ("ARM: dts: imx: add devicetree for Tolino Shine 2 HD")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index 663ee9df79e67..d6eee157c63b7 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -597,6 +597,7 @@ &usdhc3 {
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
-- 
2.39.2

[PATCH 6.1 022/224] arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 62fb54148cd6eb456ff031be8fb447c98cf0bd9b ]

Add #sound-dai-cells properties to SAI nodes.

Reviewed-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fixes: 9e9860069725 ("arm64: dts: imx8mn: Add SAI nodes")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mn.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index ba29b5b556ffa..37246ca9d9075 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -295,6 +295,7 @@ spba2: spba-bus@30000000 {
 				sai2: sai@30020000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30020000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
 						<&clk IMX8MN_CLK_DUMMY>,
@@ -309,6 +310,7 @@ sai2: sai@30020000 {
 				sai3: sai@30030000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30030000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -323,6 +325,7 @@ sai3: sai@30030000 {
 				sai5: sai@30050000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30050000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -339,6 +342,7 @@ sai5: sai@30050000 {
 				sai6: sai@30060000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x30060000  0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
@@ -396,6 +400,7 @@ spdif1: spdif@30090000 {
 				sai7: sai@300b0000 {
 					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
 					reg = <0x300b0000 0x10000>;
+					#sound-dai-cells = <0>;
 					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
 						 <&clk IMX8MN_CLK_DUMMY>,
-- 
2.39.2

[PATCH 6.1 023/224] arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes

[Greg Kroah-Hartman]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit b3cdf730486b048ca0bf23bef050550d9fd40422 ]

Add them to the SoC .dtsi, so that not every board has to specify them.

Fixes: 1225396fefea ("arm64: dts: imx93: add lpi2c nodes")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 0247866fc86b0..8ab9f8194702e 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -150,6 +150,8 @@ system_counter: timer@44290000 {
 			lpi2c1: i2c@44340000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44340000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
@@ -160,6 +162,8 @@ lpi2c1: i2c@44340000 {
 			lpi2c2: i2c@44350000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44350000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
 					 <&clk IMX93_CLK_BUS_AON>;
@@ -277,6 +281,8 @@ mu2: mailbox@42440000 {
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -287,6 +293,8 @@ lpi2c3: i2c@42530000 {
 			lpi2c4: i2c@42540000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42540000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -351,6 +359,8 @@ lpuart8: serial@426a0000 {
 			lpi2c5: i2c@426b0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426b0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -361,6 +371,8 @@ lpi2c5: i2c@426b0000 {
 			lpi2c6: i2c@426c0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426c0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -371,6 +383,8 @@ lpi2c6: i2c@426c0000 {
 			lpi2c7: i2c@426d0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426d0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
@@ -381,6 +395,8 @@ lpi2c7: i2c@426d0000 {
 			lpi2c8: i2c@426e0000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x426e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
 					 <&clk IMX93_CLK_BUS_WAKEUP>;
-- 
2.39.2

[PATCH 6.1 024/224] NFS: Fix /proc/PID/io read_bytes for buffered reads

[Greg Kroah-Hartman]

From: Dave Wysochanski <dwysocha@redhat.com>

[ Upstream commit 9c88ea00fef03031ce6554531e89be82f6a42835 ]

Prior to commit 8786fde8421c ("Convert NFS from readpages to
readahead"), nfs_readpages() used the old mm interface read_cache_pages()
which called task_io_account_read() for each NFS page read.  After
this commit, nfs_readpages() is converted to nfs_readahead(), which
now uses the new mm interface readahead_page().  The new interface
requires callers to call task_io_account_read() themselves.
In addition, to nfs_readahead() task_io_account_read() should also
be called from nfs_read_folio().

Fixes: 8786fde8421c ("Convert NFS from readpages to readahead")
Link: https://lore.kernel.org/linux-nfs/CAPt2mGNEYUk5u8V4abe=5MM5msZqmvzCVrtCP4Qw1n=gCHCnww@mail.gmail.com/
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/read.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 8ae2c8d1219d8..cd970ce62786b 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -15,6 +15,7 @@
 #include <linux/stat.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
+#include <linux/task_io_accounting_ops.h>
 #include <linux/pagemap.h>
 #include <linux/sunrpc/clnt.h>
 #include <linux/nfs_fs.h>
@@ -338,6 +339,7 @@ int nfs_read_folio(struct file *file, struct folio *folio)
 
 	trace_nfs_aop_readpage(inode, page);
 	nfs_inc_stats(inode, NFSIOS_VFSREADPAGE);
+	task_io_account_read(folio_size(folio));
 
 	/*
 	 * Try to flush any pending writes to the file..
@@ -400,6 +402,7 @@ void nfs_readahead(struct readahead_control *ractl)
 
 	trace_nfs_aop_readahead(inode, readahead_pos(ractl), nr_pages);
 	nfs_inc_stats(inode, NFSIOS_VFSREADPAGES);
+	task_io_account_read(readahead_length(ractl));
 
 	ret = -ESTALE;
 	if (NFS_STALE(inode))
-- 
2.39.2

[PATCH 6.1 025/224] xsk: Add missing overflow check in xdp_umem_reg

[Greg Kroah-Hartman]

From: Kal Conley <kal.conley@dectris.com>

[ Upstream commit c7df4813b149362248d6ef7be41a311e27bf75fe ]

The number of chunks can overflow u32. Make sure to return -EINVAL on
overflow. Also remove a redundant u32 cast assigning umem->npgs.

Fixes: bbff2f321a86 ("xsk: new descriptor addressing scheme")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230308174013.1114745-1-kal.conley@dectris.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xdp/xdp_umem.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/net/xdp/xdp_umem.c b/net/xdp/xdp_umem.c
index 4681e8e8ad943..02207e852d796 100644
--- a/net/xdp/xdp_umem.c
+++ b/net/xdp/xdp_umem.c
@@ -150,10 +150,11 @@ static int xdp_umem_account_pages(struct xdp_umem *umem)
 
 static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr)
 {
-	u32 npgs_rem, chunk_size = mr->chunk_size, headroom = mr->headroom;
 	bool unaligned_chunks = mr->flags & XDP_UMEM_UNALIGNED_CHUNK_FLAG;
-	u64 npgs, addr = mr->addr, size = mr->len;
-	unsigned int chunks, chunks_rem;
+	u32 chunk_size = mr->chunk_size, headroom = mr->headroom;
+	u64 addr = mr->addr, size = mr->len;
+	u32 chunks_rem, npgs_rem;
+	u64 chunks, npgs;
 	int err;
 
 	if (chunk_size < XDP_UMEM_MIN_CHUNK_SIZE || chunk_size > PAGE_SIZE) {
@@ -188,8 +189,8 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr)
 	if (npgs > U32_MAX)
 		return -EINVAL;
 
-	chunks = (unsigned int)div_u64_rem(size, chunk_size, &chunks_rem);
-	if (chunks == 0)
+	chunks = div_u64_rem(size, chunk_size, &chunks_rem);
+	if (!chunks || chunks > U32_MAX)
 		return -EINVAL;
 
 	if (!unaligned_chunks && chunks_rem)
@@ -202,7 +203,7 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr)
 	umem->headroom = headroom;
 	umem->chunk_size = chunk_size;
 	umem->chunks = chunks;
-	umem->npgs = (u32)npgs;
+	umem->npgs = npgs;
 	umem->pgs = NULL;
 	umem->user = NULL;
 	umem->flags = mr->flags;
-- 
2.39.2

[PATCH 6.1 026/224] iavf: fix inverted Rx hash condition leading to disabled hash

[Greg Kroah-Hartman]

From: Alexander Lobakin <aleksander.lobakin@intel.com>

[ Upstream commit 32d57f667f871bc5a8babbe27ea4c5e668ee0ea8 ]

Condition, which checks whether the netdev has hashing enabled is
inverted. Basically, the tagged commit effectively disabled passing flow
hash from descriptor to skb, unless user *disables* it via Ethtool.
Commit a876c3ba59a6 ("i40e/i40evf: properly report Rx packet hash")
fixed this problem, but only for i40e.
Invert the condition now in iavf and unblock passing hash to skbs again.

Fixes: 857942fd1aa1 ("i40e: Fix Rx hash reported to the stack by our driver")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_txrx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.c b/drivers/net/ethernet/intel/iavf/iavf_txrx.c
index 18b6a702a1d6d..e989feda133c1 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_txrx.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.c
@@ -1096,7 +1096,7 @@ static inline void iavf_rx_hash(struct iavf_ring *ring,
 		cpu_to_le64((u64)IAVF_RX_DESC_FLTSTAT_RSS_HASH <<
 			    IAVF_RX_DESC_STATUS_FLTSTAT_SHIFT);
 
-	if (ring->netdev->features & NETIF_F_RXHASH)
+	if (!(ring->netdev->features & NETIF_F_RXHASH))
 		return;
 
 	if ((rx_desc->wb.qword1.status_error_len & rss_mask) == rss_mask) {
-- 
2.39.2

[PATCH 6.1 027/224] iavf: fix non-tunneled IPv6 UDP packet type and hashing

[Greg Kroah-Hartman]

From: Alexander Lobakin <aleksander.lobakin@intel.com>

[ Upstream commit de58647b4301fe181f9c38e8b46f7021584ae427 ]

Currently, IAVF's decode_rx_desc_ptype() correctly reports payload type
of L4 for IPv4 UDP packets and IPv{4,6} TCP, but only L3 for IPv6 UDP.
Originally, i40e, ice and iavf were affected.
Commit 73df8c9e3e3d ("i40e: Correct UDP packet header for non_tunnel-ipv6")
fixed that in i40e, then
commit 638a0c8c8861 ("ice: fix incorrect payload indicator on PTYPE")
fixed that for ice.
IPv6 UDP is L4 obviously. Fix it and make iavf report correct L4 hash
type for such packets, so that the stack won't calculate it on CPU when
needs it.

Fixes: 206812b5fccb ("i40e/i40evf: i40e implementation for skb_set_hash")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_common.c b/drivers/net/ethernet/intel/iavf/iavf_common.c
index 34e46a23894f4..43148c07459f8 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_common.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_common.c
@@ -661,7 +661,7 @@ struct iavf_rx_ptype_decoded iavf_ptype_lookup[BIT(8)] = {
 	/* Non Tunneled IPv6 */
 	IAVF_PTT(88, IP, IPV6, FRG, NONE, NONE, NOF, NONE, PAY3),
 	IAVF_PTT(89, IP, IPV6, NOF, NONE, NONE, NOF, NONE, PAY3),
-	IAVF_PTT(90, IP, IPV6, NOF, NONE, NONE, NOF, UDP,  PAY3),
+	IAVF_PTT(90, IP, IPV6, NOF, NONE, NONE, NOF, UDP,  PAY4),
 	IAVF_PTT_UNUSED_ENTRY(91),
 	IAVF_PTT(92, IP, IPV6, NOF, NONE, NONE, NOF, TCP,  PAY4),
 	IAVF_PTT(93, IP, IPV6, NOF, NONE, NONE, NOF, SCTP, PAY4),
-- 
2.39.2

[PATCH 6.1 028/224] iavf: do not track VLAN 0 filters

[Greg Kroah-Hartman]

From: Ahmed Zaki <ahmed.zaki@intel.com>

[ Upstream commit 964290ff32d132bf971d45b29f7de39756dab7c8 ]

When an interface with the maximum number of VLAN filters is brought up,
a spurious error is logged:

    [257.483082] 8021q: adding VLAN 0 to HW filter on device enp0s3
    [257.483094] iavf 0000:00:03.0 enp0s3: Max allowed VLAN filters 8. Remove existing VLANs or disable filtering via Ethtool if supported.

The VF driver complains that it cannot add the VLAN 0 filter.

On the other hand, the PF driver always adds VLAN 0 filter on VF
initialization. The VF does not need to ask the PF for that filter at
all.

Fix the error by not tracking VLAN 0 filters altogether. With that, the
check added by commit 0e710a3ffd0c ("iavf: Fix VF driver counting VLAN 0
filters") in iavf_virtchnl.c is useless and might be confusing if left as
it suggests that we track VLAN 0.

Fixes: 0e710a3ffd0c ("iavf: Fix VF driver counting VLAN 0 filters")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c     | 8 ++++++++
 drivers/net/ethernet/intel/iavf/iavf_virtchnl.c | 2 --
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 3dad834b9b8e5..41edcf9e154a3 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -893,6 +893,10 @@ static int iavf_vlan_rx_add_vid(struct net_device *netdev,
 {
 	struct iavf_adapter *adapter = netdev_priv(netdev);
 
+	/* Do not track VLAN 0 filter, always added by the PF on VF init */
+	if (!vid)
+		return 0;
+
 	if (!VLAN_FILTERING_ALLOWED(adapter))
 		return -EIO;
 
@@ -919,6 +923,10 @@ static int iavf_vlan_rx_kill_vid(struct net_device *netdev,
 {
 	struct iavf_adapter *adapter = netdev_priv(netdev);
 
+	/* We do not track VLAN 0 filter */
+	if (!vid)
+		return 0;
+
 	iavf_del_vlan(adapter, IAVF_VLAN(vid, be16_to_cpu(proto)));
 	if (proto == cpu_to_be16(ETH_P_8021Q))
 		clear_bit(vid, adapter->vsi.active_cvlans);
diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
index 0752fd67c96e5..2c03ca01fdd9c 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
@@ -2438,8 +2438,6 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter,
 		list_for_each_entry(f, &adapter->vlan_filter_list, list) {
 			if (f->is_new_vlan) {
 				f->is_new_vlan = false;
-				if (!f->vlan.vid)
-					continue;
 				if (f->vlan.tpid == ETH_P_8021Q)
 					set_bit(f->vlan.vid,
 						adapter->vsi.active_cvlans);
-- 
2.39.2

[PATCH 6.1 029/224] intel/igbvf: free irq on the error path in igbvf_request_msix()

[Greg Kroah-Hartman]

From: Gaosheng Cui <cuigaosheng1@huawei.com>

[ Upstream commit 85eb39bb39cbb5c086df1e19ba67cc1366693a77 ]

In igbvf_request_msix(), irqs have not been freed on the err path,
we need to free it. Fix it.

Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igbvf/netdev.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index 3a32809510fc6..72cb1b56e9f24 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -1074,7 +1074,7 @@ static int igbvf_request_msix(struct igbvf_adapter *adapter)
 			  igbvf_intr_msix_rx, 0, adapter->rx_ring->name,
 			  netdev);
 	if (err)
-		goto out;
+		goto free_irq_tx;
 
 	adapter->rx_ring->itr_register = E1000_EITR(vector);
 	adapter->rx_ring->itr_val = adapter->current_itr;
@@ -1083,10 +1083,14 @@ static int igbvf_request_msix(struct igbvf_adapter *adapter)
 	err = request_irq(adapter->msix_entries[vector].vector,
 			  igbvf_msix_other, 0, netdev->name, netdev);
 	if (err)
-		goto out;
+		goto free_irq_rx;
 
 	igbvf_configure_msix(adapter);
 	return 0;
+free_irq_rx:
+	free_irq(adapter->msix_entries[--vector].vector, netdev);
+free_irq_tx:
+	free_irq(adapter->msix_entries[--vector].vector, netdev);
 out:
 	return err;
 }
-- 
2.39.2

[PATCH 6.1 030/224] igbvf: Regard vf reset nack as success

[Greg Kroah-Hartman]

From: Akihiko Odaki <akihiko.odaki@daynix.com>

[ Upstream commit 02c83791ef969c6a8a150b4927193d0d0e50fb23 ]

vf reset nack actually represents the reset operation itself is
performed but no address is assigned. Therefore, e1000_reset_hw_vf
should fill the "perm_addr" with the zero address and return success on
such an occasion. This prevents its callers in netdev.c from saying PF
still resetting, and instead allows them to correctly report that no
address is assigned.

Fixes: 6ddbc4cf1f4d ("igb: Indicate failure on vf reset for empty mac address")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igbvf/vf.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/igbvf/vf.c b/drivers/net/ethernet/intel/igbvf/vf.c
index b8ba3f94c3632..a47a2e3e548cf 100644
--- a/drivers/net/ethernet/intel/igbvf/vf.c
+++ b/drivers/net/ethernet/intel/igbvf/vf.c
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright(c) 2009 - 2018 Intel Corporation. */
 
+#include <linux/etherdevice.h>
+
 #include "vf.h"
 
 static s32 e1000_check_for_link_vf(struct e1000_hw *hw);
@@ -131,11 +133,16 @@ static s32 e1000_reset_hw_vf(struct e1000_hw *hw)
 		/* set our "perm_addr" based on info provided by PF */
 		ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
 		if (!ret_val) {
-			if (msgbuf[0] == (E1000_VF_RESET |
-					  E1000_VT_MSGTYPE_ACK))
+			switch (msgbuf[0]) {
+			case E1000_VF_RESET | E1000_VT_MSGTYPE_ACK:
 				memcpy(hw->mac.perm_addr, addr, ETH_ALEN);
-			else
+				break;
+			case E1000_VF_RESET | E1000_VT_MSGTYPE_NACK:
+				eth_zero_addr(hw->mac.perm_addr);
+				break;
+			default:
 				ret_val = -E1000_ERR_MAC_INIT;
+			}
 		}
 	}
 
-- 
2.39.2

[PATCH 6.1 031/224] igc: fix the validation logic for taprios gate list

[Greg Kroah-Hartman]

From: AKASHI Takahiro <takahiro.akashi@linaro.org>

[ Upstream commit 2b4cc3d3f4d8ec42961e98568a0afeee96a943ab ]

The check introduced in the commit a5fd39464a40 ("igc: Lift TAPRIO schedule
restriction") can detect a false positive error in some corner case.
For instance,
    tc qdisc replace ... taprio num_tc 4
	...
	sched-entry S 0x01 100000	# slot#1
	sched-entry S 0x03 100000	# slot#2
	sched-entry S 0x04 100000	# slot#3
	sched-entry S 0x08 200000	# slot#4
	flags 0x02			# hardware offload

Here the queue#0 (the first queue) is on at the slot#1 and #2,
and off at the slot#3 and #4. Under the current logic, when the slot#4
is examined, validate_schedule() returns *false* since the enablement
count for the queue#0 is two and it is already off at the previous slot
(i.e. #3). But this definition is truely correct.

Let's fix the logic to enforce a strict validation for consecutively-opened
slots.

Fixes: a5fd39464a40 ("igc: Lift TAPRIO schedule restriction")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igc/igc_main.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 3b5b36206c44b..1d9b70e0ff67f 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -6000,18 +6000,18 @@ static bool validate_schedule(struct igc_adapter *adapter,
 		if (e->command != TC_TAPRIO_CMD_SET_GATES)
 			return false;
 
-		for (i = 0; i < adapter->num_tx_queues; i++) {
-			if (e->gate_mask & BIT(i))
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			if (e->gate_mask & BIT(i)) {
 				queue_uses[i]++;
 
-			/* There are limitations: A single queue cannot be
-			 * opened and closed multiple times per cycle unless the
-			 * gate stays open. Check for it.
-			 */
-			if (queue_uses[i] > 1 &&
-			    !(prev->gate_mask & BIT(i)))
-				return false;
-		}
+				/* There are limitations: A single queue cannot
+				 * be opened and closed multiple times per cycle
+				 * unless the gate stays open. Check for it.
+				 */
+				if (queue_uses[i] > 1 &&
+				    !(prev->gate_mask & BIT(i)))
+					return false;
+			}
 	}
 
 	return true;
-- 
2.39.2

[PATCH 6.1 032/224] i2c: imx-lpi2c: check only for enabled interrupt flags

[Greg Kroah-Hartman]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 1c7885004567e8951d65a983be095f254dd20bef ]

When reading from I2C, the Tx watermark is set to 0. Unfortunately the
TDF (transmit data flag) is enabled when Tx FIFO entries is equal or less
than watermark. So it is set in every case, hence the reset default of 1.
This results in the MSR_RDF _and_ MSR_TDF flags to be set thus trying
to send Tx data on a read message.
Mask the IRQ status to filter for wanted flags only.

Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-imx-lpi2c.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 188f2a36d2fd6..9b2f9544c5681 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -503,10 +503,14 @@ static int lpi2c_imx_xfer(struct i2c_adapter *adapter,
 static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id)
 {
 	struct lpi2c_imx_struct *lpi2c_imx = dev_id;
+	unsigned int enabled;
 	unsigned int temp;
 
+	enabled = readl(lpi2c_imx->base + LPI2C_MIER);
+
 	lpi2c_imx_intctrl(lpi2c_imx, 0);
 	temp = readl(lpi2c_imx->base + LPI2C_MSR);
+	temp &= enabled;
 
 	if (temp & MSR_RDF)
 		lpi2c_imx_read_rxfifo(lpi2c_imx);
-- 
2.39.2

[PATCH 6.1 033/224] i2c: mxs: ensure that DMA buffers are safe for DMA

[Greg Kroah-Hartman]

From: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>

[ Upstream commit 5190417bdf72c71b65bd9892103c6186816a6e8b ]

We found that after commit 9c46929e7989
("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems"), the
PCF85063 RTC driver stopped working on i.MX28 due to regmap_bulk_read()
reading bogus data into a stack buffer. This is caused by the i2c-mxs
driver using DMA transfers even for messages without the I2C_M_DMA_SAFE
flag, and the aforementioned commit enabling vmapped stacks.

As the MXS I2C controller requires DMA for reads of >4 bytes, DMA can't be
disabled, so the issue is fixed by using i2c_get_dma_safe_msg_buf() to
create a bounce buffer when needed.

Fixes: 9c46929e7989 ("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mxs.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index d113bed795452..e0f3b3545cfe4 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -171,7 +171,7 @@ static void mxs_i2c_dma_irq_callback(void *param)
 }
 
 static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
-			struct i2c_msg *msg, uint32_t flags)
+			struct i2c_msg *msg, u8 *buf, uint32_t flags)
 {
 	struct dma_async_tx_descriptor *desc;
 	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
@@ -226,7 +226,7 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 		}
 
 		/* Queue the DMA data transfer. */
-		sg_init_one(&i2c->sg_io[1], msg->buf, msg->len);
+		sg_init_one(&i2c->sg_io[1], buf, msg->len);
 		dma_map_sg(i2c->dev, &i2c->sg_io[1], 1, DMA_FROM_DEVICE);
 		desc = dmaengine_prep_slave_sg(i2c->dmach, &i2c->sg_io[1], 1,
 					DMA_DEV_TO_MEM,
@@ -259,7 +259,7 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 		/* Queue the DMA data transfer. */
 		sg_init_table(i2c->sg_io, 2);
 		sg_set_buf(&i2c->sg_io[0], &i2c->addr_data, 1);
-		sg_set_buf(&i2c->sg_io[1], msg->buf, msg->len);
+		sg_set_buf(&i2c->sg_io[1], buf, msg->len);
 		dma_map_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
 		desc = dmaengine_prep_slave_sg(i2c->dmach, i2c->sg_io, 2,
 					DMA_MEM_TO_DEV,
@@ -563,6 +563,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
 	int ret;
 	int flags;
+	u8 *dma_buf;
 	int use_pio = 0;
 	unsigned long time_left;
 
@@ -588,13 +589,20 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 		if (ret && (ret != -ENXIO))
 			mxs_i2c_reset(i2c);
 	} else {
+		dma_buf = i2c_get_dma_safe_msg_buf(msg, 1);
+		if (!dma_buf)
+			return -ENOMEM;
+
 		reinit_completion(&i2c->cmd_complete);
-		ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
-		if (ret)
+		ret = mxs_i2c_dma_setup_xfer(adap, msg, dma_buf, flags);
+		if (ret) {
+			i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
 			return ret;
+		}
 
 		time_left = wait_for_completion_timeout(&i2c->cmd_complete,
 						msecs_to_jiffies(1000));
+		i2c_put_dma_safe_msg_buf(dma_buf, msg, true);
 		if (!time_left)
 			goto timeout;
 
-- 
2.39.2

[PATCH 6.1 034/224] i2c: hisi: Only use the completion interrupt to finish the transfer

[Greg Kroah-Hartman]

From: Yicong Yang <yangyicong@hisilicon.com>

[ Upstream commit d98263512684a47e81bcb72a5408958ecd1e60b0 ]

The controller will always generate a completion interrupt when the
transfer is finished normally or not. Currently we use either error or
completion interrupt to finish, this may result the completion
interrupt unhandled and corrupt the next transfer, especially at low
speed mode. Since on error case, the error interrupt will come first
then is the completion interrupt. So only use the completion interrupt
to finish the whole transfer process.

Fixes: d62fbdb99a85 ("i2c: add support for HiSilicon I2C controller")
Reported-by: Sheng Feng <fengsheng5@huawei.com>
Signed-off-by: Sheng Feng <fengsheng5@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-hisi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-hisi.c b/drivers/i2c/busses/i2c-hisi.c
index 76c3d8f6fc3c6..d30071f299879 100644
--- a/drivers/i2c/busses/i2c-hisi.c
+++ b/drivers/i2c/busses/i2c-hisi.c
@@ -339,7 +339,11 @@ static irqreturn_t hisi_i2c_irq(int irq, void *context)
 		hisi_i2c_read_rx_fifo(ctlr);
 
 out:
-	if (int_stat & HISI_I2C_INT_TRANS_CPLT || ctlr->xfer_err) {
+	/*
+	 * Only use TRANS_CPLT to indicate the completion. On error cases we'll
+	 * get two interrupts, INT_ERR first then TRANS_CPLT.
+	 */
+	if (int_stat & HISI_I2C_INT_TRANS_CPLT) {
 		hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
 		hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
 		complete(ctlr->completion);
-- 
2.39.2

[PATCH 6.1 035/224] scsi: scsi_dh_alua: Fix memleak for qdata in alua_activate()

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit a13faca032acbf2699293587085293bdfaafc8ae ]

If alua_rtpg_queue() failed from alua_activate(), then 'qdata' is not
freed, which will cause following memleak:

unreferenced object 0xffff88810b2c6980 (size 32):
  comm "kworker/u16:2", pid 635322, jiffies 4355801099 (age 1216426.076s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    40 39 24 c1 ff ff ff ff 00 f8 ea 0a 81 88 ff ff  @9$.............
  backtrace:
    [<0000000098f3a26d>] alua_activate+0xb0/0x320
    [<000000003b529641>] scsi_dh_activate+0xb2/0x140
    [<000000007b296db3>] activate_path_work+0xc6/0xe0 [dm_multipath]
    [<000000007adc9ace>] process_one_work+0x3c5/0x730
    [<00000000c457a985>] worker_thread+0x93/0x650
    [<00000000cb80e628>] kthread+0x1ba/0x210
    [<00000000a1e61077>] ret_from_fork+0x22/0x30

Fix the problem by freeing 'qdata' in error path.

Fixes: 625fe857e4fa ("scsi: scsi_dh_alua: Check scsi_device_get() return value")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230315062154.668812-1-yukuai1@huaweicloud.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/device_handler/scsi_dh_alua.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 610a51538f034..0781f991e7845 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -1117,10 +1117,12 @@ static int alua_activate(struct scsi_device *sdev,
 	rcu_read_unlock();
 	mutex_unlock(&h->init_mutex);
 
-	if (alua_rtpg_queue(pg, sdev, qdata, true))
+	if (alua_rtpg_queue(pg, sdev, qdata, true)) {
 		fn = NULL;
-	else
+	} else {
+		kfree(qdata);
 		err = SCSI_DH_DEV_OFFLINED;
+	}
 	kref_put(&pg->kref, release_port_group);
 out:
 	if (fn)
-- 
2.39.2

[PATCH 6.1 036/224] nfsd: dont replace page in rq_pages if its a continuation of last page

[Greg Kroah-Hartman]

From: Jeff Layton <jlayton@kernel.org>

[ Upstream commit 27c934dd8832dd40fd34776f916dc201e18b319b ]

The splice read calls nfsd_splice_actor to put the pages containing file
data into the svc_rqst->rq_pages array. It's possible however to get a
splice result that only has a partial page at the end, if (e.g.) the
filesystem hands back a short read that doesn't cover the whole page.

nfsd_splice_actor will plop the partial page into its rq_pages array and
return. Then later, when nfsd_splice_actor is called again, the
remainder of the page may end up being filled out. At this point,
nfsd_splice_actor will put the page into the array _again_ corrupting
the reply. If this is done enough times, rq_next_page will overrun the
array and corrupt the trailing fields -- the rq_respages and
rq_next_page pointers themselves.

If we've already added the page to the array in the last pass, don't add
it to the array a second time when dealing with a splice continuation.
This was originally handled properly in nfsd_splice_actor, but commit
91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()") removed the check
for it.

Fixes: 91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dario Lesca <d.lesca@solinos.it>
Tested-by: David Critch <dcritch@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2150630
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfsd/vfs.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 59f9a8cee012a..dc3ba13546dd6 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -874,8 +874,15 @@ nfsd_splice_actor(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
 	struct page *last_page;
 
 	last_page = page + (offset + sd->len - 1) / PAGE_SIZE;
-	for (page += offset / PAGE_SIZE; page <= last_page; page++)
+	for (page += offset / PAGE_SIZE; page <= last_page; page++) {
+		/*
+		 * Skip page replacement when extending the contents
+		 * of the current page.
+		 */
+		if (page == *(rqstp->rq_next_page - 1))
+			continue;
 		svc_rqst_replace_page(rqstp, page);
+	}
 	if (rqstp->rq_res.page_len == 0)	// first call
 		rqstp->rq_res.page_base = offset % PAGE_SIZE;
 	rqstp->rq_res.page_len += sd->len;
-- 
2.39.2

[PATCH 6.1 037/224] net: dsa: b53: mmap: fix device tree support

[Greg Kroah-Hartman]

From: Álvaro Fernández Rojas <noltari@gmail.com>

[ Upstream commit 30796d0dcb6e41c6558a07950f2ce60c209da867 ]

CPU port should also be enabled in order to get a working switch.

Fixes: a5538a777b73 ("net: dsa: b53: mmap: Add device tree support")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230316172807.460146-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/b53/b53_mmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
index e968322dfbf0b..70887e0aece33 100644
--- a/drivers/net/dsa/b53/b53_mmap.c
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -263,7 +263,7 @@ static int b53_mmap_probe_of(struct platform_device *pdev,
 		if (of_property_read_u32(of_port, "reg", &reg))
 			continue;
 
-		if (reg < B53_CPU_PORT)
+		if (reg < B53_N_PORTS)
 			pdata->enabled_ports |= BIT(reg);
 	}
 
-- 
2.39.2

[PATCH 6.1 038/224] net: usb: smsc95xx: Limit packet length to skb->len

[Greg Kroah-Hartman]

From: Szymon Heidrich <szymon.heidrich@gmail.com>

[ Upstream commit ff821092cf02a70c2bccd2d19269f01e29aa52cf ]

Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.

Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230316101954.75836-1-szymon.heidrich@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/smsc95xx.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 32d2c60d334dc..563ecd27b93ea 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1833,6 +1833,12 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		size = (u16)((header & RX_STS_FL_) >> 16);
 		align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
 
+		if (unlikely(size > skb->len)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "size err header=0x%08x\n", header);
+			return 0;
+		}
+
 		if (unlikely(header & RX_STS_ES_)) {
 			netif_dbg(dev, rx_err, dev->net,
 				  "Error header=0x%08x\n", header);
-- 
2.39.2

[PATCH 6.1 039/224] efi/libstub: smbios: Use length member instead of record struct size

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 34343eb06afc04af9178a9883d9354dc12beede0 ]

The type 1 SMBIOS record happens to always be the same size, but there
are other record types which have been augmented over time, and so we
should really use the length field in the header to decide where the
string table starts.

Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/libstub/smbios.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firmware/efi/libstub/smbios.c b/drivers/firmware/efi/libstub/smbios.c
index 460418b7f5f5e..aadb422b9637d 100644
--- a/drivers/firmware/efi/libstub/smbios.c
+++ b/drivers/firmware/efi/libstub/smbios.c
@@ -36,7 +36,7 @@ const u8 *__efi_get_smbios_string(u8 type, int offset, int recsize)
 	if (status != EFI_SUCCESS)
 		return NULL;
 
-	strtable = (u8 *)record + recsize;
+	strtable = (u8 *)record + record->length;
 	for (int i = 1; i < ((u8 *)record)[offset]; i++) {
 		int len = strlen(strtable);
 
-- 
2.39.2

[PATCH 6.1 040/224] qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_info

[Greg Kroah-Hartman]

From: Daniil Tatianin <d-tatianin@yandex-team.ru>

[ Upstream commit 25143b6a01d0cc5319edd3de22ffa2578b045550 ]

We have to make sure that the info returned by the helper is valid
before using it.

Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.

Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
Fixes: 733def6a04bf ("qed*: IOV link control")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_sriov.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index 0848b5529d48a..911509c2b17d5 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -4404,6 +4404,9 @@ qed_iov_configure_min_tx_rate(struct qed_dev *cdev, int vfid, u32 rate)
 	}
 
 	vf = qed_iov_get_vf_info(QED_LEADING_HWFN(cdev), (u16)vfid, true);
+	if (!vf)
+		return -EINVAL;
+
 	vport_id = vf->vport_id;
 
 	return qed_configure_vport_wfq(cdev, vport_id, rate);
@@ -5152,7 +5155,7 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn)
 
 		/* Validate that the VF has a configured vport */
 		vf = qed_iov_get_vf_info(hwfn, i, true);
-		if (!vf->vport_instance)
+		if (!vf || !vf->vport_instance)
 			continue;
 
 		memset(&params, 0, sizeof(params));
-- 
2.39.2

[PATCH 6.1 041/224] xirc2ps_cs: Fix use after free bug in xirc2ps_detach

[Greg Kroah-Hartman]

From: Zheng Wang <zyytlz.wz@163.com>

[ Upstream commit e8d20c3ded59a092532513c9bd030d1ea66f5f44 ]

In xirc2ps_probe, the local->tx_timeout_task was bounded
with xirc2ps_tx_timeout_task. When timeout occurs,
it will call xirc_tx_timeout->schedule_work to start the
work.

When we call xirc2ps_detach to remove the driver, there
may be a sequence as follows:

Stop responding to timeout tasks and complete scheduled
tasks before cleanup in xirc2ps_detach, which will fix
the problem.

CPU0                  CPU1

                    |xirc2ps_tx_timeout_task
xirc2ps_detach      |
  free_netdev       |
    kfree(dev);     |
                    |
                    | do_reset
                    |   //use dev

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xircom/xirc2ps_cs.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/xircom/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c
index 894e92ef415b9..9f505cf02d965 100644
--- a/drivers/net/ethernet/xircom/xirc2ps_cs.c
+++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c
@@ -503,6 +503,11 @@ static void
 xirc2ps_detach(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
+    struct local_info *local = netdev_priv(dev);
+
+    netif_carrier_off(dev);
+    netif_tx_disable(dev);
+    cancel_work_sync(&local->tx_timeout_task);
 
     dev_dbg(&link->dev, "detach\n");
 
-- 
2.39.2

[PATCH 6.1 042/224] net: phy: Ensure state transitions are processed from phy_stop()

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 4203d84032e28f893594a453bd8bc9c3b15c7334 ]

In the phy_disconnect() -> phy_stop() path, we will be forcibly setting
the PHY state machine to PHY_HALTED. This invalidates the old_state !=
phydev->state condition in phy_state_machine() such that we will neither
display the state change for debugging, nor will we invoke the
link_change_notify() callback.

Factor the code by introducing phy_process_state_change(), and ensure
that we process the state change from phy_stop() as well.

Fixes: 5c5f626bcace ("net: phy: improve handling link_change_notify callback")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e741d8aebffe1..d1aea767ed09f 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -57,6 +57,18 @@ static const char *phy_state_to_str(enum phy_state st)
 	return NULL;
 }
 
+static void phy_process_state_change(struct phy_device *phydev,
+				     enum phy_state old_state)
+{
+	if (old_state != phydev->state) {
+		phydev_dbg(phydev, "PHY state change %s -> %s\n",
+			   phy_state_to_str(old_state),
+			   phy_state_to_str(phydev->state));
+		if (phydev->drv && phydev->drv->link_change_notify)
+			phydev->drv->link_change_notify(phydev);
+	}
+}
+
 static void phy_link_up(struct phy_device *phydev)
 {
 	phydev->phy_link_change(phydev, true);
@@ -1093,6 +1105,7 @@ EXPORT_SYMBOL(phy_free_interrupt);
 void phy_stop(struct phy_device *phydev)
 {
 	struct net_device *dev = phydev->attached_dev;
+	enum phy_state old_state;
 
 	if (!phy_is_started(phydev) && phydev->state != PHY_DOWN) {
 		WARN(1, "called from state %s\n",
@@ -1101,6 +1114,7 @@ void phy_stop(struct phy_device *phydev)
 	}
 
 	mutex_lock(&phydev->lock);
+	old_state = phydev->state;
 
 	if (phydev->state == PHY_CABLETEST) {
 		phy_abort_cable_test(phydev);
@@ -1111,6 +1125,7 @@ void phy_stop(struct phy_device *phydev)
 		sfp_upstream_stop(phydev->sfp_bus);
 
 	phydev->state = PHY_HALTED;
+	phy_process_state_change(phydev, old_state);
 
 	mutex_unlock(&phydev->lock);
 
@@ -1228,13 +1243,7 @@ void phy_state_machine(struct work_struct *work)
 	if (err < 0)
 		phy_error(phydev);
 
-	if (old_state != phydev->state) {
-		phydev_dbg(phydev, "PHY state change %s -> %s\n",
-			   phy_state_to_str(old_state),
-			   phy_state_to_str(phydev->state));
-		if (phydev->drv && phydev->drv->link_change_notify)
-			phydev->drv->link_change_notify(phydev);
-	}
+	phy_process_state_change(phydev, old_state);
 
 	/* Only re-schedule a PHY state machine change if we are polling the
 	 * PHY, if PHY_MAC_INTERRUPT is set, then we will be moving
-- 
2.39.2

[PATCH 6.1 043/224] net: mdio: fix owner field for mdio buses registered using device-tree

[Greg Kroah-Hartman]

From: Maxime Bizon <mbizon@freebox.fr>

[ Upstream commit 99669259f3361d759219811e670b7e0742668556 ]

Bus ownership is wrong when using of_mdiobus_register() to register an mdio
bus. That function is not inline, so when it calls mdiobus_register() the wrong
THIS_MODULE value is captured.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
[florian: fix kdoc, added Fixes tag]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/mdio/of_mdio.c    | 12 +++++++-----
 drivers/net/phy/mdio_devres.c | 11 ++++++-----
 include/linux/of_mdio.h       | 22 +++++++++++++++++++---
 3 files changed, 32 insertions(+), 13 deletions(-)

diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index 510822d6d0d90..1e46e39f5f46a 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -139,21 +139,23 @@ bool of_mdiobus_child_is_phy(struct device_node *child)
 EXPORT_SYMBOL(of_mdiobus_child_is_phy);
 
 /**
- * of_mdiobus_register - Register mii_bus and create PHYs from the device tree
+ * __of_mdiobus_register - Register mii_bus and create PHYs from the device tree
  * @mdio: pointer to mii_bus structure
  * @np: pointer to device_node of MDIO bus.
+ * @owner: module owning the @mdio object.
  *
  * This function registers the mii_bus structure and registers a phy_device
  * for each child node of @np.
  */
-int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
+int __of_mdiobus_register(struct mii_bus *mdio, struct device_node *np,
+			  struct module *owner)
 {
 	struct device_node *child;
 	bool scanphys = false;
 	int addr, rc;
 
 	if (!np)
-		return mdiobus_register(mdio);
+		return __mdiobus_register(mdio, owner);
 
 	/* Do not continue if the node is disabled */
 	if (!of_device_is_available(np))
@@ -172,7 +174,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 	of_property_read_u32(np, "reset-post-delay-us", &mdio->reset_post_delay_us);
 
 	/* Register the MDIO bus */
-	rc = mdiobus_register(mdio);
+	rc = __mdiobus_register(mdio, owner);
 	if (rc)
 		return rc;
 
@@ -236,7 +238,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 	mdiobus_unregister(mdio);
 	return rc;
 }
-EXPORT_SYMBOL(of_mdiobus_register);
+EXPORT_SYMBOL(__of_mdiobus_register);
 
 /**
  * of_mdio_find_device - Given a device tree node, find the mdio_device
diff --git a/drivers/net/phy/mdio_devres.c b/drivers/net/phy/mdio_devres.c
index b560e99695dfd..69b829e6ab35b 100644
--- a/drivers/net/phy/mdio_devres.c
+++ b/drivers/net/phy/mdio_devres.c
@@ -98,13 +98,14 @@ EXPORT_SYMBOL(__devm_mdiobus_register);
 
 #if IS_ENABLED(CONFIG_OF_MDIO)
 /**
- * devm_of_mdiobus_register - Resource managed variant of of_mdiobus_register()
+ * __devm_of_mdiobus_register - Resource managed variant of of_mdiobus_register()
  * @dev:	Device to register mii_bus for
  * @mdio:	MII bus structure to register
  * @np:		Device node to parse
+ * @owner:	Owning module
  */
-int devm_of_mdiobus_register(struct device *dev, struct mii_bus *mdio,
-			     struct device_node *np)
+int __devm_of_mdiobus_register(struct device *dev, struct mii_bus *mdio,
+			       struct device_node *np, struct module *owner)
 {
 	struct mdiobus_devres *dr;
 	int ret;
@@ -117,7 +118,7 @@ int devm_of_mdiobus_register(struct device *dev, struct mii_bus *mdio,
 	if (!dr)
 		return -ENOMEM;
 
-	ret = of_mdiobus_register(mdio, np);
+	ret = __of_mdiobus_register(mdio, np, owner);
 	if (ret) {
 		devres_free(dr);
 		return ret;
@@ -127,7 +128,7 @@ int devm_of_mdiobus_register(struct device *dev, struct mii_bus *mdio,
 	devres_add(dev, dr);
 	return 0;
 }
-EXPORT_SYMBOL(devm_of_mdiobus_register);
+EXPORT_SYMBOL(__devm_of_mdiobus_register);
 #endif /* CONFIG_OF_MDIO */
 
 MODULE_LICENSE("GPL");
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index da633d34ab866..8a52ef2e6fa6b 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -14,9 +14,25 @@
 
 #if IS_ENABLED(CONFIG_OF_MDIO)
 bool of_mdiobus_child_is_phy(struct device_node *child);
-int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np);
-int devm_of_mdiobus_register(struct device *dev, struct mii_bus *mdio,
-			     struct device_node *np);
+int __of_mdiobus_register(struct mii_bus *mdio, struct device_node *np,
+			  struct module *owner);
+
+static inline int of_mdiobus_register(struct mii_bus *mdio,
+				      struct device_node *np)
+{
+	return __of_mdiobus_register(mdio, np, THIS_MODULE);
+}
+
+int __devm_of_mdiobus_register(struct device *dev, struct mii_bus *mdio,
+			       struct device_node *np, struct module *owner);
+
+static inline int devm_of_mdiobus_register(struct device *dev,
+					   struct mii_bus *mdio,
+					   struct device_node *np)
+{
+	return __devm_of_mdiobus_register(dev, mdio, np, THIS_MODULE);
+}
+
 struct mdio_device *of_mdio_find_device(struct device_node *np);
 struct phy_device *of_phy_find_device(struct device_node *phy_np);
 struct phy_device *
-- 
2.39.2

[PATCH 6.1 044/224] net: mdio: fix owner field for mdio buses registered using ACPI

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 30b605b8501e321f79e19c3238aa6ca31da6087c ]

Bus ownership is wrong when using acpi_mdiobus_register() to register an
mdio bus. That function is not inline, so when it calls
mdiobus_register() the wrong THIS_MODULE value is captured.

CC: Maxime Bizon <mbizon@freebox.fr>
Fixes: 803ca24d2f92 ("net: mdio: Add ACPI support code for mdio")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/mdio/acpi_mdio.c | 10 ++++++----
 include/linux/acpi_mdio.h    |  9 ++++++++-
 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c
index d77c987fda9cd..4630dde019749 100644
--- a/drivers/net/mdio/acpi_mdio.c
+++ b/drivers/net/mdio/acpi_mdio.c
@@ -18,16 +18,18 @@ MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
 MODULE_LICENSE("GPL");
 
 /**
- * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
+ * __acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
  * @mdio: pointer to mii_bus structure
  * @fwnode: pointer to fwnode of MDIO bus. This fwnode is expected to represent
+ * @owner: module owning this @mdio object.
  * an ACPI device object corresponding to the MDIO bus and its children are
  * expected to correspond to the PHY devices on that bus.
  *
  * This function registers the mii_bus structure and registers a phy_device
  * for each child node of @fwnode.
  */
-int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+int __acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode,
+			    struct module *owner)
 {
 	struct fwnode_handle *child;
 	u32 addr;
@@ -35,7 +37,7 @@ int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
 
 	/* Mask out all PHYs from auto probing. */
 	mdio->phy_mask = GENMASK(31, 0);
-	ret = mdiobus_register(mdio);
+	ret = __mdiobus_register(mdio, owner);
 	if (ret)
 		return ret;
 
@@ -55,4 +57,4 @@ int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
 	}
 	return 0;
 }
-EXPORT_SYMBOL(acpi_mdiobus_register);
+EXPORT_SYMBOL(__acpi_mdiobus_register);
diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h
index 0a24ab7cb66fa..8e2eefa9fbc0f 100644
--- a/include/linux/acpi_mdio.h
+++ b/include/linux/acpi_mdio.h
@@ -9,7 +9,14 @@
 #include <linux/phy.h>
 
 #if IS_ENABLED(CONFIG_ACPI_MDIO)
-int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
+int __acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode,
+			    struct module *owner);
+
+static inline int
+acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *handle)
+{
+	return __acpi_mdiobus_register(mdio, handle, THIS_MODULE);
+}
 #else /* CONFIG_ACPI_MDIO */
 static inline int
 acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
-- 
2.39.2

[PATCH 6.1 045/224] net: stmmac: Fix for mismatched host/device DMA address width

[Greg Kroah-Hartman]

From: Jochen Henneberg <jh@henneberg-systemdesign.com>

[ Upstream commit 070246e4674b125860d311c18ce2623e73e2bd51 ]

Currently DMA address width is either read from a RO device register
or force set from the platform data. This breaks DMA when the host DMA
address width is <=32it but the device is >32bit.

Right now the driver may decide to use a 2nd DMA descriptor for
another buffer (happens in case of TSO xmit) assuming that 32bit
addressing is used due to platform configuration but the device will
still use both descriptor addresses as one address.

This can be observed with the Intel EHL platform driver that sets
32bit for addr64 but the MAC reports 40bit. The TX queue gets stuck in
case of TCP with iptables NAT configuration on TSO packets.

The logic should be like this: Whatever we do on the host side (memory
allocation GFP flags) should happen with the host DMA width, whenever
we decide how to set addresses on the device registers we must use the
device DMA address width.

This patch renames the platform address width field from addr64 (term
used in device datasheet) to host_addr and uses this value exclusively
for host side operations while all chip operations consider the device
DMA width as read from the device register.

Fixes: 7cfc4486e7ea ("stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing")
Signed-off-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/common.h  |  1 +
 .../net/ethernet/stmicro/stmmac/dwmac-imx.c   |  2 +-
 .../net/ethernet/stmicro/stmmac/dwmac-intel.c |  4 +--
 .../ethernet/stmicro/stmmac/dwmac-mediatek.c  |  2 +-
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 30 ++++++++++---------
 include/linux/stmmac.h                        |  2 +-
 6 files changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 6b5d96bced475..ec9c130276d89 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -418,6 +418,7 @@ struct dma_features {
 	unsigned int frpbs;
 	unsigned int frpes;
 	unsigned int addr64;
+	unsigned int host_dma_width;
 	unsigned int rssen;
 	unsigned int vlhash;
 	unsigned int sphen;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
index bd52fb7cf4860..0d6a84199fd8a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
@@ -251,7 +251,7 @@ static int imx_dwmac_probe(struct platform_device *pdev)
 		goto err_parse_dt;
 	}
 
-	plat_dat->addr64 = dwmac->ops->addr_width;
+	plat_dat->host_dma_width = dwmac->ops->addr_width;
 	plat_dat->init = imx_dwmac_init;
 	plat_dat->exit = imx_dwmac_exit;
 	plat_dat->clks_config = imx_dwmac_clks_config;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 7deb1f817dacc..13aa919633b47 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -684,7 +684,7 @@ static int ehl_pse0_common_data(struct pci_dev *pdev,
 
 	intel_priv->is_pse = true;
 	plat->bus_id = 2;
-	plat->addr64 = 32;
+	plat->host_dma_width = 32;
 
 	plat->clk_ptp_rate = 200000000;
 
@@ -725,7 +725,7 @@ static int ehl_pse1_common_data(struct pci_dev *pdev,
 
 	intel_priv->is_pse = true;
 	plat->bus_id = 3;
-	plat->addr64 = 32;
+	plat->host_dma_width = 32;
 
 	plat->clk_ptp_rate = 200000000;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
index 2f7d8e4561d92..9ae31e3dc8218 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
@@ -591,7 +591,7 @@ static int mediatek_dwmac_common_data(struct platform_device *pdev,
 	plat->use_phy_wol = priv_plat->mac_wol ? 0 : 1;
 	plat->riwt_off = 1;
 	plat->maxmtu = ETH_DATA_LEN;
-	plat->addr64 = priv_plat->variant->dma_bit_mask;
+	plat->host_dma_width = priv_plat->variant->dma_bit_mask;
 	plat->bsp_priv = priv_plat;
 	plat->init = mediatek_dwmac_init;
 	plat->clks_config = mediatek_dwmac_clks_config;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3c1d4b27668fe..93321437f0933 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1429,7 +1429,7 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv,
 	struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i];
 	gfp_t gfp = (GFP_ATOMIC | __GFP_NOWARN);
 
-	if (priv->dma_cap.addr64 <= 32)
+	if (priv->dma_cap.host_dma_width <= 32)
 		gfp |= GFP_DMA32;
 
 	if (!buf->page) {
@@ -4585,7 +4585,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
 	unsigned int entry = rx_q->dirty_rx;
 	gfp_t gfp = (GFP_ATOMIC | __GFP_NOWARN);
 
-	if (priv->dma_cap.addr64 <= 32)
+	if (priv->dma_cap.host_dma_width <= 32)
 		gfp |= GFP_DMA32;
 
 	while (dirty-- > 0) {
@@ -6201,7 +6201,7 @@ static int stmmac_dma_cap_show(struct seq_file *seq, void *v)
 	seq_printf(seq, "\tFlexible RX Parser: %s\n",
 		   priv->dma_cap.frpsel ? "Y" : "N");
 	seq_printf(seq, "\tEnhanced Addressing: %d\n",
-		   priv->dma_cap.addr64);
+		   priv->dma_cap.host_dma_width);
 	seq_printf(seq, "\tReceive Side Scaling: %s\n",
 		   priv->dma_cap.rssen ? "Y" : "N");
 	seq_printf(seq, "\tVLAN Hash Filtering: %s\n",
@@ -7171,20 +7171,22 @@ int stmmac_dvr_probe(struct device *device,
 		dev_info(priv->device, "SPH feature enabled\n");
 	}
 
-	/* The current IP register MAC_HW_Feature1[ADDR64] only define
-	 * 32/40/64 bit width, but some SOC support others like i.MX8MP
-	 * support 34 bits but it map to 40 bits width in MAC_HW_Feature1[ADDR64].
-	 * So overwrite dma_cap.addr64 according to HW real design.
+	/* Ideally our host DMA address width is the same as for the
+	 * device. However, it may differ and then we have to use our
+	 * host DMA width for allocation and the device DMA width for
+	 * register handling.
 	 */
-	if (priv->plat->addr64)
-		priv->dma_cap.addr64 = priv->plat->addr64;
+	if (priv->plat->host_dma_width)
+		priv->dma_cap.host_dma_width = priv->plat->host_dma_width;
+	else
+		priv->dma_cap.host_dma_width = priv->dma_cap.addr64;
 
-	if (priv->dma_cap.addr64) {
+	if (priv->dma_cap.host_dma_width) {
 		ret = dma_set_mask_and_coherent(device,
-				DMA_BIT_MASK(priv->dma_cap.addr64));
+				DMA_BIT_MASK(priv->dma_cap.host_dma_width));
 		if (!ret) {
-			dev_info(priv->device, "Using %d bits DMA width\n",
-				 priv->dma_cap.addr64);
+			dev_info(priv->device, "Using %d/%d bits DMA host/device width\n",
+				 priv->dma_cap.host_dma_width, priv->dma_cap.addr64);
 
 			/*
 			 * If more than 32 bits can be addressed, make sure to
@@ -7199,7 +7201,7 @@ int stmmac_dvr_probe(struct device *device,
 				goto error_hw_init;
 			}
 
-			priv->dma_cap.addr64 = 32;
+			priv->dma_cap.host_dma_width = 32;
 		}
 	}
 
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 313edd19bf545..d82ff9fa1a6e8 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -215,7 +215,7 @@ struct plat_stmmacenet_data {
 	int unicast_filter_entries;
 	int tx_fifo_size;
 	int rx_fifo_size;
-	u32 addr64;
+	u32 host_dma_width;
 	u32 rx_queues_to_use;
 	u32 tx_queues_to_use;
 	u8 rx_sched_algorithm;
-- 
2.39.2

[PATCH 6.1 046/224] thermal/drivers/mellanox: Use generic thermal_zone_get_trip() function

[Greg Kroah-Hartman]

From: Daniel Lezcano <daniel.lezcano@linaro.org>

[ Upstream commit 44a29a4dab73411671e0b84817a5f07e291b1501 ]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20221014073253.3719911-2-daniel.lezcano@linaro.org
Stable-dep-of: 6d206b1ea9f4 ("mlxsw: core_thermal: Fix fan speed in maximum cooling state")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/mellanox/mlxsw/core_thermal.c    | 209 ++++--------------
 1 file changed, 48 insertions(+), 161 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index 987fe5c9d5a36..c5240d38c9dbd 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -36,33 +36,39 @@ enum mlxsw_thermal_trips {
 	MLXSW_THERMAL_TEMP_TRIP_HOT,
 };
 
-struct mlxsw_thermal_trip {
-	int	type;
-	int	temp;
-	int	hyst;
+struct mlxsw_cooling_states {
 	int	min_state;
 	int	max_state;
 };
 
-static const struct mlxsw_thermal_trip default_thermal_trips[] = {
+static const struct thermal_trip default_thermal_trips[] = {
 	{	/* In range - 0-40% PWM */
 		.type		= THERMAL_TRIP_ACTIVE,
-		.temp		= MLXSW_THERMAL_ASIC_TEMP_NORM,
-		.hyst		= MLXSW_THERMAL_HYSTERESIS_TEMP,
-		.min_state	= 0,
-		.max_state	= (4 * MLXSW_THERMAL_MAX_STATE) / 10,
+		.temperature	= MLXSW_THERMAL_ASIC_TEMP_NORM,
+		.hysteresis	= MLXSW_THERMAL_HYSTERESIS_TEMP,
 	},
 	{
 		/* In range - 40-100% PWM */
 		.type		= THERMAL_TRIP_ACTIVE,
-		.temp		= MLXSW_THERMAL_ASIC_TEMP_HIGH,
-		.hyst		= MLXSW_THERMAL_HYSTERESIS_TEMP,
-		.min_state	= (4 * MLXSW_THERMAL_MAX_STATE) / 10,
-		.max_state	= MLXSW_THERMAL_MAX_STATE,
+		.temperature	= MLXSW_THERMAL_ASIC_TEMP_HIGH,
+		.hysteresis	= MLXSW_THERMAL_HYSTERESIS_TEMP,
 	},
 	{	/* Warning */
 		.type		= THERMAL_TRIP_HOT,
-		.temp		= MLXSW_THERMAL_ASIC_TEMP_HOT,
+		.temperature	= MLXSW_THERMAL_ASIC_TEMP_HOT,
+	},
+};
+
+static const struct mlxsw_cooling_states default_cooling_states[] = {
+	{
+		.min_state	= 0,
+		.max_state	= (4 * MLXSW_THERMAL_MAX_STATE) / 10,
+	},
+	{
+		.min_state	= (4 * MLXSW_THERMAL_MAX_STATE) / 10,
+		.max_state	= MLXSW_THERMAL_MAX_STATE,
+	},
+	{
 		.min_state	= MLXSW_THERMAL_MAX_STATE,
 		.max_state	= MLXSW_THERMAL_MAX_STATE,
 	},
@@ -78,7 +84,8 @@ struct mlxsw_thermal;
 struct mlxsw_thermal_module {
 	struct mlxsw_thermal *parent;
 	struct thermal_zone_device *tzdev;
-	struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
+	struct thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
+	struct mlxsw_cooling_states cooling_states[MLXSW_THERMAL_NUM_TRIPS];
 	int module; /* Module or gearbox number */
 	u8 slot_index;
 };
@@ -99,7 +106,8 @@ struct mlxsw_thermal {
 	int polling_delay;
 	struct thermal_cooling_device *cdevs[MLXSW_MFCR_PWMS_MAX];
 	u8 cooling_levels[MLXSW_THERMAL_MAX_STATE + 1];
-	struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
+	struct thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
+	struct mlxsw_cooling_states cooling_states[MLXSW_THERMAL_NUM_TRIPS];
 	struct mlxsw_thermal_area line_cards[];
 };
 
@@ -136,9 +144,9 @@ static int mlxsw_get_cooling_device_idx(struct mlxsw_thermal *thermal,
 static void
 mlxsw_thermal_module_trips_reset(struct mlxsw_thermal_module *tz)
 {
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temp = 0;
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temp = 0;
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temp = 0;
+	tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temperature = 0;
+	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temperature = 0;
+	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temperature = 0;
 }
 
 static int
@@ -180,12 +188,12 @@ mlxsw_thermal_module_trips_update(struct device *dev, struct mlxsw_core *core,
 	 * by subtracting double hysteresis value.
 	 */
 	if (crit_temp >= MLXSW_THERMAL_MODULE_TEMP_SHIFT)
-		tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temp = crit_temp -
+		tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temperature = crit_temp -
 					MLXSW_THERMAL_MODULE_TEMP_SHIFT;
 	else
-		tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temp = crit_temp;
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temp = crit_temp;
-	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temp = emerg_temp;
+		tz->trips[MLXSW_THERMAL_TEMP_TRIP_NORM].temperature = crit_temp;
+	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HIGH].temperature = crit_temp;
+	tz->trips[MLXSW_THERMAL_TEMP_TRIP_HOT].temperature = emerg_temp;
 
 	return 0;
 }
@@ -202,11 +210,11 @@ static int mlxsw_thermal_bind(struct thermal_zone_device *tzdev,
 		return 0;
 
 	for (i = 0; i < MLXSW_THERMAL_NUM_TRIPS; i++) {
-		const struct mlxsw_thermal_trip *trip = &thermal->trips[i];
+		const struct mlxsw_cooling_states *state = &thermal->cooling_states[i];
 
 		err = thermal_zone_bind_cooling_device(tzdev, i, cdev,
-						       trip->max_state,
-						       trip->min_state,
+						       state->max_state,
+						       state->min_state,
 						       THERMAL_WEIGHT_DEFAULT);
 		if (err < 0) {
 			dev_err(dev, "Failed to bind cooling device to trip %d\n", i);
@@ -260,61 +268,6 @@ static int mlxsw_thermal_get_temp(struct thermal_zone_device *tzdev,
 	return 0;
 }
 
-static int mlxsw_thermal_get_trip_type(struct thermal_zone_device *tzdev,
-				       int trip,
-				       enum thermal_trip_type *p_type)
-{
-	struct mlxsw_thermal *thermal = tzdev->devdata;
-
-	if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS)
-		return -EINVAL;
-
-	*p_type = thermal->trips[trip].type;
-	return 0;
-}
-
-static int mlxsw_thermal_get_trip_temp(struct thermal_zone_device *tzdev,
-				       int trip, int *p_temp)
-{
-	struct mlxsw_thermal *thermal = tzdev->devdata;
-
-	if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS)
-		return -EINVAL;
-
-	*p_temp = thermal->trips[trip].temp;
-	return 0;
-}
-
-static int mlxsw_thermal_set_trip_temp(struct thermal_zone_device *tzdev,
-				       int trip, int temp)
-{
-	struct mlxsw_thermal *thermal = tzdev->devdata;
-
-	if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS)
-		return -EINVAL;
-
-	thermal->trips[trip].temp = temp;
-	return 0;
-}
-
-static int mlxsw_thermal_get_trip_hyst(struct thermal_zone_device *tzdev,
-				       int trip, int *p_hyst)
-{
-	struct mlxsw_thermal *thermal = tzdev->devdata;
-
-	*p_hyst = thermal->trips[trip].hyst;
-	return 0;
-}
-
-static int mlxsw_thermal_set_trip_hyst(struct thermal_zone_device *tzdev,
-				       int trip, int hyst)
-{
-	struct mlxsw_thermal *thermal = tzdev->devdata;
-
-	thermal->trips[trip].hyst = hyst;
-	return 0;
-}
-
 static struct thermal_zone_params mlxsw_thermal_params = {
 	.no_hwmon = true,
 };
@@ -323,11 +276,6 @@ static struct thermal_zone_device_ops mlxsw_thermal_ops = {
 	.bind = mlxsw_thermal_bind,
 	.unbind = mlxsw_thermal_unbind,
 	.get_temp = mlxsw_thermal_get_temp,
-	.get_trip_type	= mlxsw_thermal_get_trip_type,
-	.get_trip_temp	= mlxsw_thermal_get_trip_temp,
-	.set_trip_temp	= mlxsw_thermal_set_trip_temp,
-	.get_trip_hyst	= mlxsw_thermal_get_trip_hyst,
-	.set_trip_hyst	= mlxsw_thermal_set_trip_hyst,
 };
 
 static int mlxsw_thermal_module_bind(struct thermal_zone_device *tzdev,
@@ -342,11 +290,11 @@ static int mlxsw_thermal_module_bind(struct thermal_zone_device *tzdev,
 		return 0;
 
 	for (i = 0; i < MLXSW_THERMAL_NUM_TRIPS; i++) {
-		const struct mlxsw_thermal_trip *trip = &tz->trips[i];
+		const struct mlxsw_cooling_states *state = &tz->cooling_states[i];
 
 		err = thermal_zone_bind_cooling_device(tzdev, i, cdev,
-						       trip->max_state,
-						       trip->min_state,
+						       state->max_state,
+						       state->min_state,
 						       THERMAL_WEIGHT_DEFAULT);
 		if (err < 0)
 			goto err_thermal_zone_bind_cooling_device;
@@ -434,74 +382,10 @@ static int mlxsw_thermal_module_temp_get(struct thermal_zone_device *tzdev,
 	return 0;
 }
 
-static int
-mlxsw_thermal_module_trip_type_get(struct thermal_zone_device *tzdev, int trip,
-				   enum thermal_trip_type *p_type)
-{
-	struct mlxsw_thermal_module *tz = tzdev->devdata;
-
-	if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS)
-		return -EINVAL;
-
-	*p_type = tz->trips[trip].type;
-	return 0;
-}
-
-static int
-mlxsw_thermal_module_trip_temp_get(struct thermal_zone_device *tzdev,
-				   int trip, int *p_temp)
-{
-	struct mlxsw_thermal_module *tz = tzdev->devdata;
-
-	if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS)
-		return -EINVAL;
-
-	*p_temp = tz->trips[trip].temp;
-	return 0;
-}
-
-static int
-mlxsw_thermal_module_trip_temp_set(struct thermal_zone_device *tzdev,
-				   int trip, int temp)
-{
-	struct mlxsw_thermal_module *tz = tzdev->devdata;
-
-	if (trip < 0 || trip >= MLXSW_THERMAL_NUM_TRIPS)
-		return -EINVAL;
-
-	tz->trips[trip].temp = temp;
-	return 0;
-}
-
-static int
-mlxsw_thermal_module_trip_hyst_get(struct thermal_zone_device *tzdev, int trip,
-				   int *p_hyst)
-{
-	struct mlxsw_thermal_module *tz = tzdev->devdata;
-
-	*p_hyst = tz->trips[trip].hyst;
-	return 0;
-}
-
-static int
-mlxsw_thermal_module_trip_hyst_set(struct thermal_zone_device *tzdev, int trip,
-				   int hyst)
-{
-	struct mlxsw_thermal_module *tz = tzdev->devdata;
-
-	tz->trips[trip].hyst = hyst;
-	return 0;
-}
-
 static struct thermal_zone_device_ops mlxsw_thermal_module_ops = {
 	.bind		= mlxsw_thermal_module_bind,
 	.unbind		= mlxsw_thermal_module_unbind,
 	.get_temp	= mlxsw_thermal_module_temp_get,
-	.get_trip_type	= mlxsw_thermal_module_trip_type_get,
-	.get_trip_temp	= mlxsw_thermal_module_trip_temp_get,
-	.set_trip_temp	= mlxsw_thermal_module_trip_temp_set,
-	.get_trip_hyst	= mlxsw_thermal_module_trip_hyst_get,
-	.set_trip_hyst	= mlxsw_thermal_module_trip_hyst_set,
 };
 
 static int mlxsw_thermal_gearbox_temp_get(struct thermal_zone_device *tzdev,
@@ -531,11 +415,6 @@ static struct thermal_zone_device_ops mlxsw_thermal_gearbox_ops = {
 	.bind		= mlxsw_thermal_module_bind,
 	.unbind		= mlxsw_thermal_module_unbind,
 	.get_temp	= mlxsw_thermal_gearbox_temp_get,
-	.get_trip_type	= mlxsw_thermal_module_trip_type_get,
-	.get_trip_temp	= mlxsw_thermal_module_trip_temp_get,
-	.set_trip_temp	= mlxsw_thermal_module_trip_temp_set,
-	.get_trip_hyst	= mlxsw_thermal_module_trip_hyst_get,
-	.set_trip_hyst	= mlxsw_thermal_module_trip_hyst_set,
 };
 
 static int mlxsw_thermal_get_max_state(struct thermal_cooling_device *cdev,
@@ -617,7 +496,8 @@ mlxsw_thermal_module_tz_init(struct mlxsw_thermal_module *module_tz)
 	else
 		snprintf(tz_name, sizeof(tz_name), "mlxsw-module%d",
 			 module_tz->module + 1);
-	module_tz->tzdev = thermal_zone_device_register(tz_name,
+	module_tz->tzdev = thermal_zone_device_register_with_trips(tz_name,
+							module_tz->trips,
 							MLXSW_THERMAL_NUM_TRIPS,
 							MLXSW_THERMAL_TRIP_MASK,
 							module_tz,
@@ -661,6 +541,8 @@ mlxsw_thermal_module_init(struct device *dev, struct mlxsw_core *core,
 	module_tz->parent = thermal;
 	memcpy(module_tz->trips, default_thermal_trips,
 	       sizeof(thermal->trips));
+	memcpy(module_tz->cooling_states, default_cooling_states,
+	       sizeof(thermal->cooling_states));
 	/* Initialize all trip point. */
 	mlxsw_thermal_module_trips_reset(module_tz);
 	/* Read module temperature and thresholds. */
@@ -756,7 +638,8 @@ mlxsw_thermal_gearbox_tz_init(struct mlxsw_thermal_module *gearbox_tz)
 	else
 		snprintf(tz_name, sizeof(tz_name), "mlxsw-gearbox%d",
 			 gearbox_tz->module + 1);
-	gearbox_tz->tzdev = thermal_zone_device_register(tz_name,
+	gearbox_tz->tzdev = thermal_zone_device_register_with_trips(tz_name,
+						gearbox_tz->trips,
 						MLXSW_THERMAL_NUM_TRIPS,
 						MLXSW_THERMAL_TRIP_MASK,
 						gearbox_tz,
@@ -813,6 +696,8 @@ mlxsw_thermal_gearboxes_init(struct device *dev, struct mlxsw_core *core,
 		gearbox_tz = &area->tz_gearbox_arr[i];
 		memcpy(gearbox_tz->trips, default_thermal_trips,
 		       sizeof(thermal->trips));
+		memcpy(gearbox_tz->cooling_states, default_cooling_states,
+		       sizeof(thermal->cooling_states));
 		gearbox_tz->module = i;
 		gearbox_tz->parent = thermal;
 		gearbox_tz->slot_index = area->slot_index;
@@ -928,6 +813,7 @@ int mlxsw_thermal_init(struct mlxsw_core *core,
 	thermal->core = core;
 	thermal->bus_info = bus_info;
 	memcpy(thermal->trips, default_thermal_trips, sizeof(thermal->trips));
+	memcpy(thermal->cooling_states, default_cooling_states, sizeof(thermal->cooling_states));
 	thermal->line_cards[0].slot_index = 0;
 
 	err = mlxsw_reg_query(thermal->core, MLXSW_REG(mfcr), mfcr_pl);
@@ -981,7 +867,8 @@ int mlxsw_thermal_init(struct mlxsw_core *core,
 				 MLXSW_THERMAL_SLOW_POLL_INT :
 				 MLXSW_THERMAL_POLL_INT;
 
-	thermal->tzdev = thermal_zone_device_register("mlxsw",
+	thermal->tzdev = thermal_zone_device_register_with_trips("mlxsw",
+						      thermal->trips,
 						      MLXSW_THERMAL_NUM_TRIPS,
 						      MLXSW_THERMAL_TRIP_MASK,
 						      thermal,
-- 
2.39.2

[PATCH 6.1 047/224] mlxsw: core_thermal: Fix fan speed in maximum cooling state

[Greg Kroah-Hartman]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit 6d206b1ea9f48433a96edec7028586db1d947911 ]

The cooling levels array is supposed to prevent the system fans from
being configured below a 20% duty cycle as otherwise some of them get
stuck at 0 RPM.

Due to an off-by-one error, the last element in the array was not
initialized, causing it to be set to zero, which in turn lead to fans
being configured with a 0% duty cycle in maximum cooling state.

Since commit 332fdf951df8 ("mlxsw: thermal: Fix out-of-bounds memory
accesses") the contents of the array are static. Therefore, instead of
fixing the initialization of the array, simply remove it and adjust
thermal_cooling_device_ops::set_cur_state() so that the configured duty
cycle is never set below 20%.

Before:

 # cat /sys/class/thermal/thermal_zone0/cdev0/type
 mlxsw_fan
 # echo 10 > /sys/class/thermal/thermal_zone0/cdev0/cur_state
 # cat /sys/class/hwmon/hwmon0/name
 mlxsw
 # cat /sys/class/hwmon/hwmon0/pwm1
 0

After:

 # cat /sys/class/thermal/thermal_zone0/cdev0/type
 mlxsw_fan
 # echo 10 > /sys/class/thermal/thermal_zone0/cdev0/cur_state
 # cat /sys/class/hwmon/hwmon0/name
 mlxsw
 # cat /sys/class/hwmon/hwmon0/pwm1
 255

This bug was uncovered when the thermal subsystem repeatedly tried to
configure the cooling devices to their maximum state due to another
issue [1]. This resulted in the fans being stuck at 0 RPM, which
eventually lead to the system undergoing thermal shutdown.

[1] https://lore.kernel.org/netdev/ZA3CFNhU4AbtsP4G@shredder/

Fixes: a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index c5240d38c9dbd..09ed6e5fa6c34 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -105,7 +105,6 @@ struct mlxsw_thermal {
 	struct thermal_zone_device *tzdev;
 	int polling_delay;
 	struct thermal_cooling_device *cdevs[MLXSW_MFCR_PWMS_MAX];
-	u8 cooling_levels[MLXSW_THERMAL_MAX_STATE + 1];
 	struct thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
 	struct mlxsw_cooling_states cooling_states[MLXSW_THERMAL_NUM_TRIPS];
 	struct mlxsw_thermal_area line_cards[];
@@ -468,7 +467,7 @@ static int mlxsw_thermal_set_cur_state(struct thermal_cooling_device *cdev,
 		return idx;
 
 	/* Normalize the state to the valid speed range. */
-	state = thermal->cooling_levels[state];
+	state = max_t(unsigned long, MLXSW_THERMAL_MIN_STATE, state);
 	mlxsw_reg_mfsc_pack(mfsc_pl, idx, mlxsw_state_to_duty(state));
 	err = mlxsw_reg_write(thermal->core, MLXSW_REG(mfsc), mfsc_pl);
 	if (err) {
@@ -859,10 +858,6 @@ int mlxsw_thermal_init(struct mlxsw_core *core,
 		}
 	}
 
-	/* Initialize cooling levels per PWM state. */
-	for (i = 0; i < MLXSW_THERMAL_MAX_STATE; i++)
-		thermal->cooling_levels[i] = max(MLXSW_THERMAL_MIN_STATE, i);
-
 	thermal->polling_delay = bus_info->low_frequency ?
 				 MLXSW_THERMAL_SLOW_POLL_INT :
 				 MLXSW_THERMAL_POLL_INT;
-- 
2.39.2

[PATCH 6.1 048/224] drm/i915: Print return value on error

[Greg Kroah-Hartman]

From: Nirmoy Das <nirmoy.das@intel.com>

[ Upstream commit 20c68127e8e9d7899001c47465d0b79581f5fdc1 ]

Print returned error code for better debuggability.

Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014154655.14075-1-nirmoy.das@intel.com
Stable-dep-of: ed00eba03474 ("drm/i915/fbdev: lock the fbdev obj before vma pin")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/display/intel_fbdev.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_fbdev.c b/drivers/gpu/drm/i915/display/intel_fbdev.c
index 9899b5dcd291d..d9b42905bad84 100644
--- a/drivers/gpu/drm/i915/display/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/display/intel_fbdev.c
@@ -175,7 +175,7 @@ static int intelfb_alloc(struct drm_fb_helper *helper,
 	}
 
 	if (IS_ERR(obj)) {
-		drm_err(&dev_priv->drm, "failed to allocate framebuffer\n");
+		drm_err(&dev_priv->drm, "failed to allocate framebuffer (%pe)\n", obj);
 		return PTR_ERR(obj);
 	}
 
@@ -256,7 +256,7 @@ static int intelfb_create(struct drm_fb_helper *helper,
 
 	info = drm_fb_helper_alloc_fbi(helper);
 	if (IS_ERR(info)) {
-		drm_err(&dev_priv->drm, "Failed to allocate fb_info\n");
+		drm_err(&dev_priv->drm, "Failed to allocate fb_info (%pe)\n", info);
 		ret = PTR_ERR(info);
 		goto out_unpin;
 	}
@@ -291,7 +291,7 @@ static int intelfb_create(struct drm_fb_helper *helper,
 	vaddr = i915_vma_pin_iomap(vma);
 	if (IS_ERR(vaddr)) {
 		drm_err(&dev_priv->drm,
-			"Failed to remap framebuffer into virtual memory\n");
+			"Failed to remap framebuffer into virtual memory (%pe)\n", vaddr);
 		ret = PTR_ERR(vaddr);
 		goto out_unpin;
 	}
-- 
2.39.2

[PATCH 6.1 049/224] drm/i915/fbdev: lock the fbdev obj before vma pin

[Greg Kroah-Hartman]

From: Tejas Upadhyay <tejas.upadhyay@intel.com>

[ Upstream commit ed00eba03474adbf525ff03d69705d8c78b76456 ]

lock the fbdev obj before calling into
i915_vma_pin_iomap(). This helps to solve below :

<7>[   93.563308] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
<4>[   93.581844] ------------[ cut here ]------------
<4>[   93.581855] WARNING: CPU: 12 PID: 625 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:424 i915_gem_object_pin_map+0x152/0x1c0 [i915]

Fixes: f0b6b01b3efe ("drm/i915: Add ww context to intel_dpt_pin, v2.")
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-5-radhakrishna.sripada@intel.com
(cherry picked from commit 561b31acfd65502a2cda2067513240fc57ccdbdc)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/display/intel_fbdev.c | 24 ++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_fbdev.c b/drivers/gpu/drm/i915/display/intel_fbdev.c
index d9b42905bad84..968915000519f 100644
--- a/drivers/gpu/drm/i915/display/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/display/intel_fbdev.c
@@ -208,6 +208,7 @@ static int intelfb_create(struct drm_fb_helper *helper,
 	bool prealloc = false;
 	void __iomem *vaddr;
 	struct drm_i915_gem_object *obj;
+	struct i915_gem_ww_ctx ww;
 	int ret;
 
 	mutex_lock(&ifbdev->hpd_lock);
@@ -288,13 +289,24 @@ static int intelfb_create(struct drm_fb_helper *helper,
 		info->fix.smem_len = vma->size;
 	}
 
-	vaddr = i915_vma_pin_iomap(vma);
-	if (IS_ERR(vaddr)) {
-		drm_err(&dev_priv->drm,
-			"Failed to remap framebuffer into virtual memory (%pe)\n", vaddr);
-		ret = PTR_ERR(vaddr);
-		goto out_unpin;
+	for_i915_gem_ww(&ww, ret, false) {
+		ret = i915_gem_object_lock(vma->obj, &ww);
+
+		if (ret)
+			continue;
+
+		vaddr = i915_vma_pin_iomap(vma);
+		if (IS_ERR(vaddr)) {
+			drm_err(&dev_priv->drm,
+				"Failed to remap framebuffer into virtual memory (%pe)\n", vaddr);
+			ret = PTR_ERR(vaddr);
+			continue;
+		}
 	}
+
+	if (ret)
+		goto out_unpin;
+
 	info->screen_base = vaddr;
 	info->screen_size = vma->size;
 
-- 
2.39.2

[PATCH 6.1 050/224] drm/i915/guc: Rename GuC register state capture node to be more obvious

[Greg Kroah-Hartman]

From: John Harrison <John.C.Harrison@Intel.com>

[ Upstream commit 583ebae783b8241a30581c084ad6226051b594c5 ]

The GuC specific register state entry in the error capture object was
just called 'capture'. Although the companion 'node' entry was called
'guc_capture_node'. Rename the base entry to be 'guc_capture' instead
so that it is a) more consistent and b) more obvious what it is.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-9-John.C.Harrison@Intel.com
Stable-dep-of: 8df23e4c4f72 ("drm/i915/guc: Fix missing ecodes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c | 8 ++++----
 drivers/gpu/drm/i915/i915_gpu_error.h          | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c
index 685ddccc0f26a..13118609339ac 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c
@@ -1491,7 +1491,7 @@ int intel_guc_capture_print_engine_node(struct drm_i915_error_state_buf *ebuf,
 
 	if (!ebuf || !ee)
 		return -EINVAL;
-	cap = ee->capture;
+	cap = ee->guc_capture;
 	if (!cap || !ee->engine)
 		return -ENODEV;
 
@@ -1561,8 +1561,8 @@ void intel_guc_capture_free_node(struct intel_engine_coredump *ee)
 	if (!ee || !ee->guc_capture_node)
 		return;
 
-	guc_capture_add_node_to_cachelist(ee->capture, ee->guc_capture_node);
-	ee->capture = NULL;
+	guc_capture_add_node_to_cachelist(ee->guc_capture, ee->guc_capture_node);
+	ee->guc_capture = NULL;
 	ee->guc_capture_node = NULL;
 }
 
@@ -1596,7 +1596,7 @@ void intel_guc_capture_get_matching_node(struct intel_gt *gt,
 		    (ce->lrc.lrca & CTX_GTT_ADDRESS_MASK)) {
 			list_del(&n->link);
 			ee->guc_capture_node = n;
-			ee->capture = guc->capture;
+			ee->guc_capture = guc->capture;
 			return;
 		}
 	}
diff --git a/drivers/gpu/drm/i915/i915_gpu_error.h b/drivers/gpu/drm/i915/i915_gpu_error.h
index efc75cc2ffdb9..56027ffbce51f 100644
--- a/drivers/gpu/drm/i915/i915_gpu_error.h
+++ b/drivers/gpu/drm/i915/i915_gpu_error.h
@@ -94,7 +94,7 @@ struct intel_engine_coredump {
 	struct intel_instdone instdone;
 
 	/* GuC matched capture-lists info */
-	struct intel_guc_state_capture *capture;
+	struct intel_guc_state_capture *guc_capture;
 	struct __guc_capture_parsed_output *guc_capture_node;
 
 	struct i915_gem_context_coredump {
-- 
2.39.2

[PATCH 6.1 051/224] drm/i915/guc: Fix missing ecodes

[Greg Kroah-Hartman]

From: John Harrison <John.C.Harrison@Intel.com>

[ Upstream commit 8df23e4c4f72f4e201c28e6fb0a67e2dbf30628a ]

Error captures are tagged with an 'ecode'. This is a pseduo-unique magic
number that is meant to distinguish similar seeming bugs with
different underlying signatures. It is a combination of two ring state
registers. Unfortunately, the register state being used is only valid
in execlist mode. In GuC mode, the register state exists in a separate
list of arbitrary register address/value pairs rather than the named
entry structure. So, search through that list to find the two exciting
registers and copy them over to the structure's named members.

v2: if else if instead of if if (Alan)

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Fixes: a6f0f9cf330a ("drm/i915/guc: Plumb GuC-capture into gpu_coredump")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230311063714.570389-2-John.C.Harrison@Intel.com
(cherry picked from commit 9724ecdbb9ddd6da3260e4a442574b90fc75188a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/i915/gt/uc/intel_guc_capture.c    | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c
index 13118609339ac..1e1fa20fb41c9 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c
@@ -1556,6 +1556,27 @@ int intel_guc_capture_print_engine_node(struct drm_i915_error_state_buf *ebuf,
 
 #endif //CONFIG_DRM_I915_CAPTURE_ERROR
 
+static void guc_capture_find_ecode(struct intel_engine_coredump *ee)
+{
+	struct gcap_reg_list_info *reginfo;
+	struct guc_mmio_reg *regs;
+	i915_reg_t reg_ipehr = RING_IPEHR(0);
+	i915_reg_t reg_instdone = RING_INSTDONE(0);
+	int i;
+
+	if (!ee->guc_capture_node)
+		return;
+
+	reginfo = ee->guc_capture_node->reginfo + GUC_CAPTURE_LIST_TYPE_ENGINE_INSTANCE;
+	regs = reginfo->regs;
+	for (i = 0; i < reginfo->num_regs; i++) {
+		if (regs[i].offset == reg_ipehr.reg)
+			ee->ipehr = regs[i].value;
+		else if (regs[i].offset == reg_instdone.reg)
+			ee->instdone.instdone = regs[i].value;
+	}
+}
+
 void intel_guc_capture_free_node(struct intel_engine_coredump *ee)
 {
 	if (!ee || !ee->guc_capture_node)
@@ -1597,6 +1618,7 @@ void intel_guc_capture_get_matching_node(struct intel_gt *gt,
 			list_del(&n->link);
 			ee->guc_capture_node = n;
 			ee->guc_capture = guc->capture;
+			guc_capture_find_ecode(ee);
 			return;
 		}
 	}
-- 
2.39.2

[PATCH 6.1 052/224] drm/i915/gt: perform uc late init after probe error injection

[Greg Kroah-Hartman]

From: Andrzej Hajda <andrzej.hajda@intel.com>

[ Upstream commit 150784f9285e656373cf3953ef4a7663f1e1a0f2 ]

Probe pseudo errors should be injected only in places where real errors
can be encountered, otherwise unwinding code can be broken.
Placing intel_uc_init_late before i915_inject_probe_error violated
this rule, resulting in following bug:
__intel_gt_disable:655 GEM_BUG_ON(intel_gt_pm_is_awake(gt))

Fixes: 481d458caede ("drm/i915/guc: Add golden context to GuC ADS")
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314151920.1065847-1-andrzej.hajda@intel.com
(cherry picked from commit c4252a11131c7f27a158294241466e2a4e7ff94e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/gt/intel_gt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_gt.c b/drivers/gpu/drm/i915/gt/intel_gt.c
index c7db49749a636..d12ec092e62df 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt.c
+++ b/drivers/gpu/drm/i915/gt/intel_gt.c
@@ -691,12 +691,12 @@ int intel_gt_init(struct intel_gt *gt)
 	if (err)
 		goto err_gt;
 
-	intel_uc_init_late(&gt->uc);
-
 	err = i915_inject_probe_error(gt->i915, -EIO);
 	if (err)
 		goto err_gt;
 
+	intel_uc_init_late(&gt->uc);
+
 	intel_migrate_init(&gt->migrate, gt);
 
 	intel_pxp_init(&gt->pxp);
-- 
2.39.2

[PATCH 6.1 053/224] net: qcom/emac: Fix use after free bug in emac_remove due to race condition

[Greg Kroah-Hartman]

From: Zheng Wang <zyytlz.wz@163.com>

[ Upstream commit 6b6bc5b8bd2d4ca9e1efa9ae0f98a0b0687ace75 ]

In emac_probe, &adpt->work_thread is bound with
emac_work_thread. Then it will be started by timeout
handler emac_tx_timeout or a IRQ handler emac_isr.

If we remove the driver which will call emac_remove
  to make cleanup, there may be a unfinished work.

The possible sequence is as follows:

Fix it by finishing the work before cleanup in the emac_remove
and disable timeout response.

CPU0                  CPU1

                    |emac_work_thread
emac_remove         |
free_netdev         |
kfree(netdev);      |
                    |emac_reinit_locked
                    |emac_mac_down
                    |//use netdev
Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qualcomm/emac/emac.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c
index 3115b2c128980..eaa50050aa0b7 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac.c
@@ -724,9 +724,15 @@ static int emac_remove(struct platform_device *pdev)
 	struct net_device *netdev = dev_get_drvdata(&pdev->dev);
 	struct emac_adapter *adpt = netdev_priv(netdev);
 
+	netif_carrier_off(netdev);
+	netif_tx_disable(netdev);
+
 	unregister_netdev(netdev);
 	netif_napi_del(&adpt->rx_q.napi);
 
+	free_irq(adpt->irq.irq, &adpt->irq);
+	cancel_work_sync(&adpt->work_thread);
+
 	emac_clks_teardown(adpt);
 
 	put_device(&adpt->phydev->mdio.dev);
-- 
2.39.2

[PATCH 6.1 054/224] net: usb: lan78xx: Limit packet length to skb->len

[Greg Kroah-Hartman]

From: Szymon Heidrich <szymon.heidrich@gmail.com>

[ Upstream commit 7f247f5a2c18b3f21206cdd51193df4f38e1b9f5 ]

Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.

Additionally prevent integer underflow when size is less than
ETH_FCS_LEN.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/lan78xx.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 068488890d57b..c458c030fadf6 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -3579,13 +3579,29 @@ static int lan78xx_rx(struct lan78xx_net *dev, struct sk_buff *skb,
 		size = (rx_cmd_a & RX_CMD_A_LEN_MASK_);
 		align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
 
+		if (unlikely(size > skb->len)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "size err rx_cmd_a=0x%08x\n",
+				  rx_cmd_a);
+			return 0;
+		}
+
 		if (unlikely(rx_cmd_a & RX_CMD_A_RED_)) {
 			netif_dbg(dev, rx_err, dev->net,
 				  "Error rx_cmd_a=0x%08x", rx_cmd_a);
 		} else {
-			u32 frame_len = size - ETH_FCS_LEN;
+			u32 frame_len;
 			struct sk_buff *skb2;
 
+			if (unlikely(size < ETH_FCS_LEN)) {
+				netif_dbg(dev, rx_err, dev->net,
+					  "size err rx_cmd_a=0x%08x\n",
+					  rx_cmd_a);
+				return 0;
+			}
+
+			frame_len = size - ETH_FCS_LEN;
+
 			skb2 = napi_alloc_skb(&dev->napi, frame_len);
 			if (!skb2)
 				return 0;
-- 
2.39.2

[PATCH 6.1 055/224] net/ps3_gelic_net: Fix RX sk_buff length

[Greg Kroah-Hartman]

From: Geoff Levand <geoff@infradead.org>

[ Upstream commit 19b3bb51c3bc288b3f2c6f8c4450b0f548320625 ]

The Gelic Ethernet device needs to have the RX sk_buffs aligned to
GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must
be a multiple of GELIC_NET_RXBUF_ALIGN.

The current Gelic Ethernet driver was not allocating sk_buffs large
enough to allow for this alignment.

Also, correct the maximum and minimum MTU sizes, and add a new
preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME.

Fixes various randomly occurring runtime network errors.

Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3")
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/toshiba/ps3_gelic_net.c | 19 ++++++++++---------
 drivers/net/ethernet/toshiba/ps3_gelic_net.h |  5 +++--
 2 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index cf8de8a7a8a1e..dffd664e65f4e 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -365,26 +365,27 @@ static int gelic_card_init_chain(struct gelic_card *card,
  *
  * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
  * Activate the descriptor state-wise
+ *
+ * Gelic RX sk_buffs must be aligned to GELIC_NET_RXBUF_ALIGN and the length
+ * must be a multiple of GELIC_NET_RXBUF_ALIGN.
  */
 static int gelic_descr_prepare_rx(struct gelic_card *card,
 				  struct gelic_descr *descr)
 {
+	static const unsigned int rx_skb_size =
+		ALIGN(GELIC_NET_MAX_FRAME, GELIC_NET_RXBUF_ALIGN) +
+		GELIC_NET_RXBUF_ALIGN - 1;
 	int offset;
-	unsigned int bufsize;
 
 	if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE)
 		dev_info(ctodev(card), "%s: ERROR status\n", __func__);
-	/* we need to round up the buffer size to a multiple of 128 */
-	bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
 
-	/* and we need to have it 128 byte aligned, therefore we allocate a
-	 * bit more */
-	descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1);
+	descr->skb = netdev_alloc_skb(*card->netdev, rx_skb_size);
 	if (!descr->skb) {
 		descr->buf_addr = 0; /* tell DMAC don't touch memory */
 		return -ENOMEM;
 	}
-	descr->buf_size = cpu_to_be32(bufsize);
+	descr->buf_size = cpu_to_be32(rx_skb_size);
 	descr->dmac_cmd_status = 0;
 	descr->result_size = 0;
 	descr->valid_size = 0;
@@ -397,7 +398,7 @@ static int gelic_descr_prepare_rx(struct gelic_card *card,
 	/* io-mmu-map the skb */
 	descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
 						     descr->skb->data,
-						     GELIC_NET_MAX_MTU,
+						     GELIC_NET_MAX_FRAME,
 						     DMA_FROM_DEVICE));
 	if (!descr->buf_addr) {
 		dev_kfree_skb_any(descr->skb);
@@ -915,7 +916,7 @@ static void gelic_net_pass_skb_up(struct gelic_descr *descr,
 	data_error = be32_to_cpu(descr->data_error);
 	/* unmap skb buffer */
 	dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr),
-			 GELIC_NET_MAX_MTU,
+			 GELIC_NET_MAX_FRAME,
 			 DMA_FROM_DEVICE);
 
 	skb_put(skb, be32_to_cpu(descr->valid_size)?
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
index 68f324ed4eaf0..0d98defb011ed 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
@@ -19,8 +19,9 @@
 #define GELIC_NET_RX_DESCRIPTORS        128 /* num of descriptors */
 #define GELIC_NET_TX_DESCRIPTORS        128 /* num of descriptors */
 
-#define GELIC_NET_MAX_MTU               VLAN_ETH_FRAME_LEN
-#define GELIC_NET_MIN_MTU               VLAN_ETH_ZLEN
+#define GELIC_NET_MAX_FRAME             2312
+#define GELIC_NET_MAX_MTU               2294
+#define GELIC_NET_MIN_MTU               64
 #define GELIC_NET_RXBUF_ALIGN           128
 #define GELIC_CARD_RX_CSUM_DEFAULT      1 /* hw chksum */
 #define GELIC_NET_WATCHDOG_TIMEOUT      5*HZ
-- 
2.39.2

[PATCH 6.1 056/224] net/ps3_gelic_net: Use dma_mapping_error

[Greg Kroah-Hartman]

From: Geoff Levand <geoff@infradead.org>

[ Upstream commit bebe933d35a63d4f042fbf4dce4f22e689ba0fcd ]

The current Gelic Etherenet driver was checking the return value of its
dma_map_single call, and not using the dma_mapping_error() routine.

Fixes runtime problems like these:

  DMA-API: ps3_gelic_driver sb_05: device driver failed to check map error
  WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:1027 .check_unmap+0x888/0x8dc

Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/toshiba/ps3_gelic_net.c | 24 +++++++++++---------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index dffd664e65f4e..9d535ae596266 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -317,15 +317,17 @@ static int gelic_card_init_chain(struct gelic_card *card,
 
 	/* set up the hardware pointers in each descriptor */
 	for (i = 0; i < no; i++, descr++) {
+		dma_addr_t cpu_addr;
+
 		gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
-		descr->bus_addr =
-			dma_map_single(ctodev(card), descr,
-				       GELIC_DESCR_SIZE,
-				       DMA_BIDIRECTIONAL);
 
-		if (!descr->bus_addr)
+		cpu_addr = dma_map_single(ctodev(card), descr,
+					  GELIC_DESCR_SIZE, DMA_BIDIRECTIONAL);
+
+		if (dma_mapping_error(ctodev(card), cpu_addr))
 			goto iommu_error;
 
+		descr->bus_addr = cpu_to_be32(cpu_addr);
 		descr->next = descr + 1;
 		descr->prev = descr - 1;
 	}
@@ -375,6 +377,7 @@ static int gelic_descr_prepare_rx(struct gelic_card *card,
 	static const unsigned int rx_skb_size =
 		ALIGN(GELIC_NET_MAX_FRAME, GELIC_NET_RXBUF_ALIGN) +
 		GELIC_NET_RXBUF_ALIGN - 1;
+	dma_addr_t cpu_addr;
 	int offset;
 
 	if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE)
@@ -396,11 +399,10 @@ static int gelic_descr_prepare_rx(struct gelic_card *card,
 	if (offset)
 		skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
 	/* io-mmu-map the skb */
-	descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
-						     descr->skb->data,
-						     GELIC_NET_MAX_FRAME,
-						     DMA_FROM_DEVICE));
-	if (!descr->buf_addr) {
+	cpu_addr = dma_map_single(ctodev(card), descr->skb->data,
+				  GELIC_NET_MAX_FRAME, DMA_FROM_DEVICE);
+	descr->buf_addr = cpu_to_be32(cpu_addr);
+	if (dma_mapping_error(ctodev(card), cpu_addr)) {
 		dev_kfree_skb_any(descr->skb);
 		descr->skb = NULL;
 		dev_info(ctodev(card),
@@ -780,7 +782,7 @@ static int gelic_descr_prepare_tx(struct gelic_card *card,
 
 	buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE);
 
-	if (!buf) {
+	if (dma_mapping_error(ctodev(card), buf)) {
 		dev_err(ctodev(card),
 			"dma map 2 failed (%p, %i). Dropping packet\n",
 			skb->data, skb->len);
-- 
2.39.2

[PATCH 6.1 057/224] octeontx2-vf: Add missing free for alloc_percpu

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit f038f3917baf04835ba2b7bcf2a04ac93fbf8a9c ]

Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid
memory leak, same as the "pf->hw.lmt_info" in
`drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`.

Fixes: 5c0512072f65 ("octeontx2-pf: cn10k: Use runtime allocated LMTLINE region")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230317064337.18198-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
index 7f8ffbf79cf74..ab126f8706c74 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
@@ -709,6 +709,7 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 err_ptp_destroy:
 	otx2_ptp_destroy(vf);
 err_detach_rsrc:
+	free_percpu(vf->hw.lmt_info);
 	if (test_bit(CN10K_LMTST, &vf->hw.cap_flag))
 		qmem_free(vf->dev, vf->dync_lmt);
 	otx2_detach_resources(&vf->mbox);
@@ -762,6 +763,7 @@ static void otx2vf_remove(struct pci_dev *pdev)
 	otx2_shutdown_tc(vf);
 	otx2vf_disable_mbox_intr(vf);
 	otx2_detach_resources(&vf->mbox);
+	free_percpu(vf->hw.lmt_info);
 	if (test_bit(CN10K_LMTST, &vf->hw.cap_flag))
 		qmem_free(vf->dev, vf->dync_lmt);
 	otx2vf_vfaf_mbox_destroy(vf);
-- 
2.39.2

[PATCH 6.1 058/224] bootconfig: Fix testcase to increase max node

[Greg Kroah-Hartman]

From: Masami Hiramatsu (Google) <mhiramat@kernel.org>

[ Upstream commit b69245126a48e50882021180fa5d264dc7149ccc ]

Since commit 6c40624930c5 ("bootconfig: Increase max nodes of bootconfig
from 1024 to 8192 for DCC support") increased the max number of bootconfig
node to 8192, the bootconfig testcase of the max number of nodes fails.
To fix this issue, we can not simply increase the number in the test script
because the test bootconfig file becomes too big (>32KB). To fix that, we
can use a combination of three alphabets (26^3 = 17576). But with that,
we can not express the 8193 (just one exceed from the limitation) because
it also exceeds the max size of bootconfig. So, the first 26 nodes will just
use one alphabet.

With this fix, test-bootconfig.sh passes all tests.

Link: https://lore.kernel.org/all/167888844790.791176.670805252426835131.stgit@devnote2/

Reported-by: Heinz Wiesinger <pprkut@slackware.com>
Link: https://lore.kernel.org/all/2463802.XAFRqVoOGU@amaterasu.liwjatan.org
Fixes: 6c40624930c5 ("bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bootconfig/test-bootconfig.sh | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/tools/bootconfig/test-bootconfig.sh b/tools/bootconfig/test-bootconfig.sh
index f68e2e9eef8b2..a2c484c243f5d 100755
--- a/tools/bootconfig/test-bootconfig.sh
+++ b/tools/bootconfig/test-bootconfig.sh
@@ -87,10 +87,14 @@ xfail grep -i "error" $OUTFILE
 
 echo "Max node number check"
 
-echo -n > $TEMPCONF
-for i in `seq 1 1024` ; do
-   echo "node$i" >> $TEMPCONF
-done
+awk '
+BEGIN {
+  for (i = 0; i < 26; i += 1)
+      printf("%c\n", 65 + i % 26)
+  for (i = 26; i < 8192; i += 1)
+      printf("%c%c%c\n", 65 + i % 26, 65 + (i / 26) % 26, 65 + (i / 26 / 26))
+}
+' > $TEMPCONF
 xpass $BOOTCONF -a $TEMPCONF $INITRD
 
 echo "badnode" >> $TEMPCONF
-- 
2.39.2

[PATCH 6.1 059/224] keys: Do not cache key in task struct if key is requested from kernel thread

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 47f9e4c924025c5be87959d3335e66fcbb7f6b5c ]

The key which gets cached in task structure from a kernel thread does not
get invalidated even after expiry.  Due to which, a new key request from
kernel thread will be served with the cached key if it's present in task
struct irrespective of the key validity.  The change is to not cache key in
task_struct when key requested from kernel thread so that kernel thread
gets a valid key on every key request.

The problem has been seen with the cifs module doing DNS lookups from a
kernel thread and the results getting pinned by being attached to that
kernel thread's cache - and thus not something that can be easily got rid
of.  The cache would ordinarily be cleared by notify-resume, but kernel
threads don't do that.

This isn't seen with AFS because AFS is doing request_key() within the
kernel half of a user thread - which will do notify-resume.

Fixes: 7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Steve French <smfrench@gmail.com>
cc: keyrings@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/CAGypqWw951d=zYRbdgNR4snUDvJhWL=q3=WOyh7HhSJupjz2vA@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/keys/request_key.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index 2da4404276f0f..07a0ef2baacd8 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -38,9 +38,12 @@ static void cache_requested_key(struct key *key)
 #ifdef CONFIG_KEYS_REQUEST_CACHE
 	struct task_struct *t = current;
 
-	key_put(t->cached_requested_key);
-	t->cached_requested_key = key_get(key);
-	set_tsk_thread_flag(t, TIF_NOTIFY_RESUME);
+	/* Do not cache key if it is a kernel thread */
+	if (!(t->flags & PF_KTHREAD)) {
+		key_put(t->cached_requested_key);
+		t->cached_requested_key = key_get(key);
+		set_tsk_thread_flag(t, TIF_NOTIFY_RESUME);
+	}
 #endif
 }
 
-- 
2.39.2

[PATCH 6.1 060/224] ice: check if VF exists before mode check

[Greg Kroah-Hartman]

From: Michal Swiatkowski <michal.swiatkowski@intel.com>

[ Upstream commit 83b49e7f63da88a1544cba2b2e40bfabb24bd203 ]

Setting trust on VF should return EINVAL when there is no VF. Move
checking for switchdev mode after checking if VF exists.

Fixes: c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Kalyan Kodamagula <kalyan.kodamagula@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_sriov.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_sriov.c b/drivers/net/ethernet/intel/ice/ice_sriov.c
index 3ba1408c56a9a..b3849bc3d4fc6 100644
--- a/drivers/net/ethernet/intel/ice/ice_sriov.c
+++ b/drivers/net/ethernet/intel/ice/ice_sriov.c
@@ -1384,15 +1384,15 @@ int ice_set_vf_trust(struct net_device *netdev, int vf_id, bool trusted)
 	struct ice_vf *vf;
 	int ret;
 
+	vf = ice_get_vf_by_id(pf, vf_id);
+	if (!vf)
+		return -EINVAL;
+
 	if (ice_is_eswitch_mode_switchdev(pf)) {
 		dev_info(ice_pf_to_dev(pf), "Trusted VF is forbidden in switchdev mode\n");
 		return -EOPNOTSUPP;
 	}
 
-	vf = ice_get_vf_by_id(pf, vf_id);
-	if (!vf)
-		return -EINVAL;
-
 	ret = ice_check_vf_ready_for_cfg(vf);
 	if (ret)
 		goto out_put_vf;
-- 
2.39.2

[PATCH 6.1 061/224] iavf: fix hang on reboot with ice

[Greg Kroah-Hartman]

From: Stefan Assmann <sassmann@kpanic.de>

[ Upstream commit 4e264be98b88a6d6f476c11087fe865696e8bef5 ]

When a system with E810 with existing VFs gets rebooted the following
hang may be observed.

 Pid 1 is hung in iavf_remove(), part of a network driver:
 PID: 1        TASK: ffff965400e5a340  CPU: 24   COMMAND: "systemd-shutdow"
  #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb
  #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d
  #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc
  #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930
  #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf]
  #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513
  #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa
  #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc
  #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e
  #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429
 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4
 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice]
 #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice]
 #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice]
 #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1
 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386
 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870
 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6
 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159
 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc
 #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d
 #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169
 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b
     RIP: 00007f1baa5c13d7  RSP: 00007fffbcc55a98  RFLAGS: 00000202
     RAX: ffffffffffffffda  RBX: 0000000000000000  RCX: 00007f1baa5c13d7
     RDX: 0000000001234567  RSI: 0000000028121969  RDI: 00000000fee1dead
     RBP: 00007fffbcc55ca0   R8: 0000000000000000   R9: 00007fffbcc54e90
     R10: 00007fffbcc55050  R11: 0000000000000202  R12: 0000000000000005
     R13: 0000000000000000  R14: 00007fffbcc55af0  R15: 0000000000000000
     ORIG_RAX: 00000000000000a9  CS: 0033  SS: 002b

During reboot all drivers PM shutdown callbacks are invoked.
In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE.
In ice_shutdown() the call chain above is executed, which at some point
calls iavf_remove(). However iavf_remove() expects the VF to be in one
of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If
that's not the case it sleeps forever.
So if iavf_shutdown() gets invoked before iavf_remove() the system will
hang indefinitely because the adapter is already in state __IAVF_REMOVE.

Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE,
as we already went through iavf_shutdown().

Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove")
Fixes: a8417330f8a5 ("iavf: Fix race condition between iavf_shutdown and iavf_remove")
Reported-by: Marius Cornea <mcornea@redhat.com>
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 41edcf9e154a3..5f8fff6c701fc 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -5086,6 +5086,11 @@ static void iavf_remove(struct pci_dev *pdev)
 			mutex_unlock(&adapter->crit_lock);
 			break;
 		}
+		/* Simply return if we already went through iavf_shutdown */
+		if (adapter->state == __IAVF_REMOVE) {
+			mutex_unlock(&adapter->crit_lock);
+			return;
+		}
 
 		mutex_unlock(&adapter->crit_lock);
 		usleep_range(500, 1000);
-- 
2.39.2

[PATCH 6.1 062/224] i40e: fix flow director packet filter programming

[Greg Kroah-Hartman]

From: Radoslaw Tyl <radoslawx.tyl@intel.com>

[ Upstream commit c672297bbc0e86dbf88396b8053e2fbb173f16ff ]

Initialize to zero structures to build a valid
Tx Packet used for the filter programming.

Fixes: a9219b332f52 ("i40e: VLAN field for flow director")
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index b97c95f89fa02..494775d65bf28 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -171,10 +171,10 @@ static char *i40e_create_dummy_packet(u8 *dummy_packet, bool ipv4, u8 l4proto,
 				      struct i40e_fdir_filter *data)
 {
 	bool is_vlan = !!data->vlan_tag;
-	struct vlan_hdr vlan;
-	struct ipv6hdr ipv6;
-	struct ethhdr eth;
-	struct iphdr ip;
+	struct vlan_hdr vlan = {};
+	struct ipv6hdr ipv6 = {};
+	struct ethhdr eth = {};
+	struct iphdr ip = {};
 	u8 *tmp;
 
 	if (ipv4) {
-- 
2.39.2

[PATCH 6.1 063/224] bpf: Adjust insufficient default bpf_jit_limit

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit 10ec8ca8ec1a2f04c4ed90897225231c58c124a7 ]

We've seen recent AWS EKS (Kubernetes) user reports like the following:

  After upgrading EKS nodes from v20230203 to v20230217 on our 1.24 EKS
  clusters after a few days a number of the nodes have containers stuck
  in ContainerCreating state or liveness/readiness probes reporting the
  following error:

    Readiness probe errored: rpc error: code = Unknown desc = failed to
    exec in container: failed to start exec "4a11039f730203ffc003b7[...]":
    OCI runtime exec failed: exec failed: unable to start container process:
    unable to init seccomp: error loading seccomp filter into kernel:
    error loading seccomp filter: errno 524: unknown

  However, we had not been seeing this issue on previous AMIs and it only
  started to occur on v20230217 (following the upgrade from kernel 5.4 to
  5.10) with no other changes to the underlying cluster or workloads.

  We tried the suggestions from that issue (sysctl net.core.bpf_jit_limit=452534528)
  which helped to immediately allow containers to be created and probes to
  execute but after approximately a day the issue returned and the value
  returned by cat /proc/vmallocinfo | grep bpf_jit | awk '{s+=$2} END {print s}'
  was steadily increasing.

I tested bpf tree to observe bpf_jit_charge_modmem, bpf_jit_uncharge_modmem
their sizes passed in as well as bpf_jit_current under tcpdump BPF filter,
seccomp BPF and native (e)BPF programs, and the behavior all looks sane
and expected, that is nothing "leaking" from an upstream perspective.

The bpf_jit_limit knob was originally added in order to avoid a situation
where unprivileged applications loading BPF programs (e.g. seccomp BPF
policies) consuming all the module memory space via BPF JIT such that loading
of kernel modules would be prevented. The default limit was defined back in
2018 and while good enough back then, we are generally seeing far more BPF
consumers today.

Adjust the limit for the BPF JIT pool from originally 1/4 to now 1/2 of the
module memory space to better reflect today's needs and avoid more users
running into potentially hard to debug issues.

Fixes: fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Reported-by: Stephen Haynes <sh@synk.net>
Reported-by: Lefteris Alexakis <lefteris.alexakis@kpn.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://github.com/awslabs/amazon-eks-ami/issues/1179
Link: https://github.com/awslabs/amazon-eks-ami/issues/1219
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230320143725.8394-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 211f63e87c637..64706723624b9 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -969,7 +969,7 @@ static int __init bpf_jit_charge_init(void)
 {
 	/* Only used as heuristic here to derive limit. */
 	bpf_jit_limit_max = bpf_jit_alloc_exec_limit();
-	bpf_jit_limit = min_t(u64, round_up(bpf_jit_limit_max >> 2,
+	bpf_jit_limit = min_t(u64, round_up(bpf_jit_limit_max >> 1,
 					    PAGE_SIZE), LONG_MAX);
 	return 0;
 }
-- 
2.39.2

[PATCH 6.1 064/224] net/mlx5e: Set uplink rep as NETNS_LOCAL

[Greg Kroah-Hartman]

From: Gavin Li <gavinl@nvidia.com>

[ Upstream commit c83172b0639c8a005c0dd3b36252dc22ddd9f19c ]

Previously, NETNS_LOCAL was not set for uplink representors, inconsistent
with VF representors, and allowed the uplink representor to be moved
between net namespaces and separated from the VF representors it shares
the core device with. Such usage would break the isolation model of
namespaces, as devices in different namespaces would have access to
shared memory.

To solve this issue, set NETNS_LOCAL for uplink representors if eswitch is
in switchdev mode.

Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 609a49c1e09e6..3b5c5064cfafc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4081,8 +4081,12 @@ static netdev_features_t mlx5e_fix_features(struct net_device *netdev,
 		}
 	}
 
-	if (mlx5e_is_uplink_rep(priv))
+	if (mlx5e_is_uplink_rep(priv)) {
 		features = mlx5e_fix_uplink_rep_features(netdev, features);
+		features |= NETIF_F_NETNS_LOCAL;
+	} else {
+		features &= ~NETIF_F_NETNS_LOCAL;
+	}
 
 	mutex_unlock(&priv->state_lock);
 
-- 
2.39.2

[PATCH 6.1 065/224] net/mlx5e: Block entering switchdev mode with ns inconsistency

[Greg Kroah-Hartman]

From: Gavin Li <gavinl@nvidia.com>

[ Upstream commit 662404b24a4c4d839839ed25e3097571f5938b9b ]

Upon entering switchdev mode, VF/SF representors are spawned in the
devlink instance's net namespace, whereas the PF net device transforms
into the uplink representor, remaining in the net namespace the PF net
device was in. Therefore, if a PF net device's namespace is different from
its parent devlink net namespace, entering switchdev mode can create an
illegal situation where all representors sharing the same core device
are NOT in the same net namespace.

To avoid this issue, block entering switchdev mode for devices whose child
netdev net namespace has diverged from the parent devlink's.

Fixes: 7768d1971de6 ("net/mlx5: E-Switch, Add control for encapsulation")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../mellanox/mlx5/core/eswitch_offloads.c     | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 34790a82a0976..64e5b9f29206e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -3488,6 +3488,18 @@ static int esw_inline_mode_to_devlink(u8 mlx5_mode, u8 *mode)
 	return 0;
 }
 
+static bool esw_offloads_devlink_ns_eq_netdev_ns(struct devlink *devlink)
+{
+	struct net *devl_net, *netdev_net;
+	struct mlx5_eswitch *esw;
+
+	esw = mlx5_devlink_eswitch_get(devlink);
+	netdev_net = dev_net(esw->dev->mlx5e_res.uplink_netdev);
+	devl_net = devlink_net(devlink);
+
+	return net_eq(devl_net, netdev_net);
+}
+
 int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode,
 				  struct netlink_ext_ack *extack)
 {
@@ -3502,6 +3514,13 @@ int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode,
 	if (esw_mode_from_devlink(mode, &mlx5_mode))
 		return -EINVAL;
 
+	if (mode == DEVLINK_ESWITCH_MODE_SWITCHDEV &&
+	    !esw_offloads_devlink_ns_eq_netdev_ns(devlink)) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Can't change E-Switch mode to switchdev when netdev net namespace has diverged from the devlink's.");
+		return -EPERM;
+	}
+
 	mlx5_lag_disable_change(esw->dev);
 	err = mlx5_esw_try_lock(esw);
 	if (err < 0) {
-- 
2.39.2

[PATCH 6.1 066/224] net/mlx5: Fix steering rules cleanup

[Greg Kroah-Hartman]

From: Lama Kayal <lkayal@nvidia.com>

[ Upstream commit 922f56e9a795d6f3dd72d3428ebdd7ee040fa855 ]

vport's mc, uc and multicast rules are not deleted in teardown path when
EEH happens. Since the vport's promisc settings(uc, mc and all) in
firmware are reset after EEH, mlx5 driver will try to delete the above
rules in the initialization path. This cause kernel crash because these
software rules are no longer valid.

Fix by nullifying these rules right after delete to avoid accessing any dangling
pointers.

Call Trace:
__list_del_entry_valid+0xcc/0x100 (unreliable)
tree_put_node+0xf4/0x1b0 [mlx5_core]
tree_remove_node+0x30/0x70 [mlx5_core]
mlx5_del_flow_rules+0x14c/0x1f0 [mlx5_core]
esw_apply_vport_rx_mode+0x10c/0x200 [mlx5_core]
esw_update_vport_rx_mode+0xb4/0x180 [mlx5_core]
esw_vport_change_handle_locked+0x1ec/0x230 [mlx5_core]
esw_enable_vport+0x130/0x260 [mlx5_core]
mlx5_eswitch_enable_sriov+0x2a0/0x2f0 [mlx5_core]
mlx5_device_enable_sriov+0x74/0x440 [mlx5_core]
mlx5_load_one+0x114c/0x1550 [mlx5_core]
mlx5_pci_resume+0x68/0xf0 [mlx5_core]
eeh_report_resume+0x1a4/0x230
eeh_pe_dev_traverse+0x98/0x170
eeh_handle_normal_event+0x3e4/0x640
eeh_handle_event+0x4c/0x370
eeh_event_handler+0x14c/0x210
kthread+0x168/0x1b0
ret_from_kernel_thread+0x5c/0x84

Fixes: a35f71f27a61 ("net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 43ba00d5e36ec..4b9d567c8f473 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -916,6 +916,7 @@ void mlx5_esw_vport_disable(struct mlx5_eswitch *esw, u16 vport_num)
 	 */
 	esw_vport_change_handle_locked(vport);
 	vport->enabled_events = 0;
+	esw_apply_vport_rx_mode(esw, vport, false, false);
 	esw_vport_cleanup(esw, vport);
 	esw->enabled_vports--;
 
-- 
2.39.2

[PATCH 6.1 067/224] net/mlx5e: Overcome slow response for first macsec ASO WQE

[Greg Kroah-Hartman]

From: Emeel Hakim <ehakim@nvidia.com>

[ Upstream commit 7e3fce82d945cf6e7f99034b113ff2d250d7524d ]

First ASO WQE poll causes a cache miss in hardware hence the resut is
delayed. It causes to the situation where such WQE is polled earlier
than it is needed.

Add logic to retry ASO CQ polling operation.

Fixes: 739cfa34518e ("net/mlx5: Make ASO poll CQ usable in atomic context") 
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/en_accel/macsec.c    | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
index 0c23340bfcc75..0f8f3ce35537d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
@@ -1412,6 +1412,7 @@ static int macsec_aso_query(struct mlx5_core_dev *mdev, struct mlx5e_macsec *mac
 	struct mlx5e_macsec_aso *aso;
 	struct mlx5_aso_wqe *aso_wqe;
 	struct mlx5_aso *maso;
+	unsigned long expires;
 	int err;
 
 	aso = &macsec->aso;
@@ -1425,7 +1426,13 @@ static int macsec_aso_query(struct mlx5_core_dev *mdev, struct mlx5e_macsec *mac
 	macsec_aso_build_wqe_ctrl_seg(aso, &aso_wqe->aso_ctrl, NULL);
 
 	mlx5_aso_post_wqe(maso, false, &aso_wqe->ctrl);
-	err = mlx5_aso_poll_cq(maso, false);
+	expires = jiffies + msecs_to_jiffies(10);
+	do {
+		err = mlx5_aso_poll_cq(maso, false);
+		if (err)
+			usleep_range(2, 10);
+	} while (err && time_is_after_jiffies(expires));
+
 	if (err)
 		goto err_out;
 
-- 
2.39.2

[PATCH 6.1 068/224] net/mlx5: Read the TC mapping of all priorities on ETS query

[Greg Kroah-Hartman]

From: Maher Sanalla <msanalla@nvidia.com>

[ Upstream commit 44d553188c38ac74b799dfdcebafef2f7bb70942 ]

When ETS configurations are queried by the user to get the mapping
assignment between packet priority and traffic class, only priorities up
to maximum TCs are queried from QTCT register in FW to retrieve their
assigned TC, leaving the rest of the priorities mapped to the default
TC #0 which might be misleading.

Fix by querying the TC mapping of all priorities on each ETS query,
regardless of the maximum number of TCs configured in FW.

Fixes: 820c2c5e773d ("net/mlx5e: Read ETS settings directly from firmware")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index 2449731b7d79a..89de92d064836 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -117,12 +117,14 @@ static int mlx5e_dcbnl_ieee_getets(struct net_device *netdev,
 	if (!MLX5_CAP_GEN(priv->mdev, ets))
 		return -EOPNOTSUPP;
 
-	ets->ets_cap = mlx5_max_tc(priv->mdev) + 1;
-	for (i = 0; i < ets->ets_cap; i++) {
+	for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
 		err = mlx5_query_port_prio_tc(mdev, i, &ets->prio_tc[i]);
 		if (err)
 			return err;
+	}
 
+	ets->ets_cap = mlx5_max_tc(priv->mdev) + 1;
+	for (i = 0; i < ets->ets_cap; i++) {
 		err = mlx5_query_port_tc_group(mdev, i, &tc_group[i]);
 		if (err)
 			return err;
-- 
2.39.2

[PATCH 6.1 069/224] net/mlx5: E-Switch, Fix an Oops in error handling code

[Greg Kroah-Hartman]

From: Dan Carpenter <error27@gmail.com>

[ Upstream commit 640fcdbcf27fc62de9223f958ceb4e897a00e791 ]

The error handling dereferences "vport".  There is nothing we can do if
it is an error pointer except returning the error code.

Fixes: 133dcfc577ea ("net/mlx5: E-Switch, Alloc and free unique metadata for match")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/esw/acl/ingress_ofld.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/ingress_ofld.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/ingress_ofld.c
index a994e71e05c11..db578a7e7008a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/ingress_ofld.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/ingress_ofld.c
@@ -364,8 +364,7 @@ int mlx5_esw_acl_ingress_vport_bond_update(struct mlx5_eswitch *esw, u16 vport_n
 
 	if (WARN_ON_ONCE(IS_ERR(vport))) {
 		esw_warn(esw->dev, "vport(%d) invalid!\n", vport_num);
-		err = PTR_ERR(vport);
-		goto out;
+		return PTR_ERR(vport);
 	}
 
 	esw_acl_ingress_ofld_rules_destroy(esw, vport);
-- 
2.39.2

[PATCH 6.1 070/224] net: dsa: tag_brcm: legacy: fix daisy-chained switches

[Greg Kroah-Hartman]

From: Álvaro Fernández Rojas <noltari@gmail.com>

[ Upstream commit 032a954061afd4b7426c3eb6bfd2952ef1e9a384 ]

When BCM63xx internal switches are connected to switches with a 4-byte
Broadcom tag, it does not identify the packet as VLAN tagged, so it adds one
based on its PVID (which is likely 0).
Right now, the packet is received by the BCM63xx internal switch and the 6-byte
tag is properly processed. The next step would to decode the corresponding
4-byte tag. However, the internal switch adds an invalid VLAN tag after the
6-byte tag and the 4-byte tag handling fails.
In order to fix this we need to remove the invalid VLAN tag after the 6-byte
tag before passing it to the 4-byte tag decoding.

Fixes: 964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230319095540.239064-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/dsa/tag_brcm.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/dsa/tag_brcm.c b/net/dsa/tag_brcm.c
index 16889ea3e0a79..a65d62fb90094 100644
--- a/net/dsa/tag_brcm.c
+++ b/net/dsa/tag_brcm.c
@@ -7,6 +7,7 @@
 
 #include <linux/dsa/brcm.h>
 #include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
 #include <linux/list.h>
 #include <linux/slab.h>
 
@@ -248,6 +249,7 @@ static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb,
 static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
 					struct net_device *dev)
 {
+	int len = BRCM_LEG_TAG_LEN;
 	int source_port;
 	u8 *brcm_tag;
 
@@ -262,12 +264,16 @@ static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
 	if (!skb->dev)
 		return NULL;
 
+	/* VLAN tag is added by BCM63xx internal switch */
+	if (netdev_uses_dsa(skb->dev))
+		len += VLAN_HLEN;
+
 	/* Remove Broadcom tag and update checksum */
-	skb_pull_rcsum(skb, BRCM_LEG_TAG_LEN);
+	skb_pull_rcsum(skb, len);
 
 	dsa_default_offload_fwd_mark(skb);
 
-	dsa_strip_etype_header(skb, BRCM_LEG_TAG_LEN);
+	dsa_strip_etype_header(skb, len);
 
 	return skb;
 }
-- 
2.39.2

[PATCH 6.1 071/224] atm: idt77252: fix kmemleak when rmmod idt77252

[Greg Kroah-Hartman]

From: Li Zetao <lizetao1@huawei.com>

[ Upstream commit 4fe3c88552a3fbe1944426a4506a18cdeb457b5a ]

There are memory leaks reported by kmemleak:

  unreferenced object 0xffff888106500800 (size 128):
    comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
      [<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
      [<000000000e947e2a>] idt77252_init_one+0x2847/0x3c90 [idt77252]
      [<000000006efb048e>] local_pci_probe+0xeb/0x1a0
    ...

  unreferenced object 0xffff888106500b00 (size 128):
    comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s)
    hex dump (first 32 bytes):
      00 20 3d 01 80 88 ff ff 00 20 3d 01 80 88 ff ff  . =...... =.....
      f0 23 3d 01 80 88 ff ff 00 20 3d 01 00 00 00 00  .#=...... =.....
    backtrace:
      [<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
      [<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
      [<00000000f451c5be>] alloc_scq.constprop.0+0x4a/0x400 [idt77252]
      [<00000000e6313849>] idt77252_init_one+0x28cf/0x3c90 [idt77252]

The root cause is traced to the vc_maps which alloced in open_card_oam()
are not freed in close_card_oam(). The vc_maps are used to record
open connections, so when close a vc_map in close_card_oam(), the memory
should be freed. Moreover, the ubr0 is not closed when close a idt77252
device, leading to the memory leak of vc_map and scq_info.

Fix them by adding kfree in close_card_oam() and implementing new
close_card_ubr0() to close ubr0.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Francois Romieu <romieu@fr.zoreil.com>
Link: https://lore.kernel.org/r/20230320143318.2644630-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/idt77252.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index 681cb3786794d..49cb4537344aa 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -2909,6 +2909,7 @@ close_card_oam(struct idt77252_dev *card)
 
 				recycle_rx_pool_skb(card, &vc->rcv.rx_pool);
 			}
+			kfree(vc);
 		}
 	}
 }
@@ -2952,6 +2953,15 @@ open_card_ubr0(struct idt77252_dev *card)
 	return 0;
 }
 
+static void
+close_card_ubr0(struct idt77252_dev *card)
+{
+	struct vc_map *vc = card->vcs[0];
+
+	free_scq(card, vc->scq);
+	kfree(vc);
+}
+
 static int
 idt77252_dev_open(struct idt77252_dev *card)
 {
@@ -3001,6 +3011,7 @@ static void idt77252_dev_close(struct atm_dev *dev)
 	struct idt77252_dev *card = dev->dev_data;
 	u32 conf;
 
+	close_card_ubr0(card);
 	close_card_oam(card);
 
 	conf = SAR_CFG_RXPTH |	/* enable receive path           */
-- 
2.39.2

[PATCH 6.1 072/224] erspan: do not use skb_mac_header() in ndo_start_xmit()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 8e50ed774554f93d55426039b27b1e38d7fa64d8 ]

Drivers should not assume skb_mac_header(skb) == skb->data in their
ndo_start_xmit().

Use skb_network_offset() and skb_transport_offset() which
better describe what is needed in erspan_fb_xmit() and
ip6erspan_tunnel_xmit()

syzbot reported:
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 skb_mac_header include/linux/skbuff.h:2873 [inline]
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Modules linked in:
CPU: 0 PID: 5083 Comm: syz-executor406 Not tainted 6.3.0-rc2-syzkaller-00866-gd4671cb96fa3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:skb_mac_header include/linux/skbuff.h:2873 [inline]
RIP: 0010:ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Code: 04 02 41 01 de 84 c0 74 08 3c 03 0f 8e 1c 0a 00 00 45 89 b4 24 c8 00 00 00 c6 85 77 fe ff ff 01 e9 33 e7 ff ff e8 b4 27 a1 f8 <0f> 0b e9 b6 e7 ff ff e8 a8 27 a1 f8 49 8d bf f0 0c 00 00 48 b8 00
RSP: 0018:ffffc90003b2f830 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000
RDX: ffff888021273a80 RSI: ffffffff88e1bd4c RDI: 0000000000000003
RBP: ffffc90003b2f9d8 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000000 R12: ffff88802b28da00
R13: 00000000000000d0 R14: ffff88807e25b6d0 R15: ffff888023408000
FS: 0000555556a61300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e5b11eb6e8 CR3: 0000000027c1b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__netdev_start_xmit include/linux/netdevice.h:4900 [inline]
netdev_start_xmit include/linux/netdevice.h:4914 [inline]
__dev_direct_xmit+0x504/0x730 net/core/dev.c:4300
dev_direct_xmit include/linux/netdevice.h:3088 [inline]
packet_xmit+0x20a/0x390 net/packet/af_packet.c:285
packet_snd net/packet/af_packet.c:3075 [inline]
packet_sendmsg+0x31a0/0x5150 net/packet/af_packet.c:3107
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:747
__sys_sendto+0x23a/0x340 net/socket.c:2142
__do_sys_sendto net/socket.c:2154 [inline]
__se_sys_sendto net/socket.c:2150 [inline]
__x64_sys_sendto+0xe1/0x1b0 net/socket.c:2150
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f123aaa1039
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc15d12058 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f123aaa1039
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000020000040 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f123aa648c0
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000

Fixes: 1baf5ebf8954 ("erspan: auto detect truncated packets.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230320163427.8096-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_gre.c  | 4 ++--
 net/ipv6/ip6_gre.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index cae9f1a4e059f..5b8242265617d 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -552,7 +552,7 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev)
 		truncate = true;
 	}
 
-	nhoff = skb_network_header(skb) - skb_mac_header(skb);
+	nhoff = skb_network_offset(skb);
 	if (skb->protocol == htons(ETH_P_IP) &&
 	    (ntohs(ip_hdr(skb)->tot_len) > skb->len - nhoff))
 		truncate = true;
@@ -561,7 +561,7 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev)
 		int thoff;
 
 		if (skb_transport_header_was_set(skb))
-			thoff = skb_transport_header(skb) - skb_mac_header(skb);
+			thoff = skb_transport_offset(skb);
 		else
 			thoff = nhoff + sizeof(struct ipv6hdr);
 		if (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff)
diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index c035a96fba3a4..4d5937af08ee9 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -981,7 +981,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb,
 		truncate = true;
 	}
 
-	nhoff = skb_network_header(skb) - skb_mac_header(skb);
+	nhoff = skb_network_offset(skb);
 	if (skb->protocol == htons(ETH_P_IP) &&
 	    (ntohs(ip_hdr(skb)->tot_len) > skb->len - nhoff))
 		truncate = true;
@@ -990,7 +990,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb,
 		int thoff;
 
 		if (skb_transport_header_was_set(skb))
-			thoff = skb_transport_header(skb) - skb_mac_header(skb);
+			thoff = skb_transport_offset(skb);
 		else
 			thoff = nhoff + sizeof(struct ipv6hdr);
 		if (ntohs(ipv6_hdr(skb)->payload_len) > skb->len - thoff)
-- 
2.39.2

[PATCH 6.1 073/224] net/sonic: use dma_mapping_error() for error check

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

[ Upstream commit 4107b8746d93ace135b8c4da4f19bbae81db785f ]

The DMA address returned by dma_map_single() should be checked with
dma_mapping_error(). Fix it accordingly.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/6645a4b5c1e364312103f48b7b36783b94e197a2.1679370343.git.fthain@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/natsemi/sonic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/natsemi/sonic.c b/drivers/net/ethernet/natsemi/sonic.c
index d17d1b4f2585f..825356ee3492e 100644
--- a/drivers/net/ethernet/natsemi/sonic.c
+++ b/drivers/net/ethernet/natsemi/sonic.c
@@ -292,7 +292,7 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 	 */
 
 	laddr = dma_map_single(lp->device, skb->data, length, DMA_TO_DEVICE);
-	if (!laddr) {
+	if (dma_mapping_error(lp->device, laddr)) {
 		pr_err_ratelimited("%s: failed to map tx DMA buffer.\n", dev->name);
 		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
@@ -509,7 +509,7 @@ static bool sonic_alloc_rb(struct net_device *dev, struct sonic_local *lp,
 
 	*new_addr = dma_map_single(lp->device, skb_put(*new_skb, SONIC_RBSIZE),
 				   SONIC_RBSIZE, DMA_FROM_DEVICE);
-	if (!*new_addr) {
+	if (dma_mapping_error(lp->device, *new_addr)) {
 		dev_kfree_skb(*new_skb);
 		*new_skb = NULL;
 		return false;
-- 
2.39.2

[PATCH 6.1 074/224] nvme-tcp: fix nvme_tcp_term_pdu to match spec

[Greg Kroah-Hartman]

From: Caleb Sander <csander@purestorage.com>

[ Upstream commit aa01c67de5926fdb276793180564f172c55fb0d7 ]

The FEI field of C2HTermReq/H2CTermReq is 4 bytes but not 4-byte-aligned
in the NVMe/TCP specification (it is located at offset 10 in the PDU).
Split it into two 16-bit integers in struct nvme_tcp_term_pdu
so no padding is inserted. There should also be 10 reserved bytes after.
There are currently no users of this type.

Fixes: fc221d05447aa6db ("nvme-tcp: Add protocol header")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/nvme-tcp.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/linux/nvme-tcp.h b/include/linux/nvme-tcp.h
index 75470159a194d..57ebe1267f7fb 100644
--- a/include/linux/nvme-tcp.h
+++ b/include/linux/nvme-tcp.h
@@ -115,8 +115,9 @@ struct nvme_tcp_icresp_pdu {
 struct nvme_tcp_term_pdu {
 	struct nvme_tcp_hdr	hdr;
 	__le16			fes;
-	__le32			fei;
-	__u8			rsvd[8];
+	__le16			feil;
+	__le16			feiu;
+	__u8			rsvd[10];
 };
 
 /**
-- 
2.39.2

[PATCH 6.1 075/224] mlxsw: spectrum_fid: Fix incorrect local port type

[Greg Kroah-Hartman]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit bb765a743377d46d8da8e7f7e5128022504741b9 ]

Local port is a 10-bit number, but it was mistakenly stored in a u8,
resulting in firmware errors when using a netdev corresponding to a
local port higher than 255.

Fix by storing the local port in u16, as is done in the rest of the
code.

Fixes: bf73904f5fba ("mlxsw: Add support for 802.1Q FID family")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/eace1f9d96545ab8a2775db857cb7e291a9b166b.1679398549.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c
index 045a24cacfa51..b6ee2d658b0c4 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c
@@ -1354,7 +1354,7 @@ static int mlxsw_sp_fid_8021q_port_vid_map(struct mlxsw_sp_fid *fid,
 					   u16 vid)
 {
 	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
-	u8 local_port = mlxsw_sp_port->local_port;
+	u16 local_port = mlxsw_sp_port->local_port;
 	int err;
 
 	/* In case there are no {Port, VID} => FID mappings on the port,
@@ -1391,7 +1391,7 @@ mlxsw_sp_fid_8021q_port_vid_unmap(struct mlxsw_sp_fid *fid,
 				  struct mlxsw_sp_port *mlxsw_sp_port, u16 vid)
 {
 	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
-	u8 local_port = mlxsw_sp_port->local_port;
+	u16 local_port = mlxsw_sp_port->local_port;
 
 	mlxsw_sp_fid_port_vid_list_del(fid, mlxsw_sp_port->local_port, vid);
 	mlxsw_sp_fid_evid_map(fid, local_port, vid, false);
-- 
2.39.2

[PATCH 6.1 076/224] hvc/xen: prevent concurrent accesses to the shared ring

[Greg Kroah-Hartman]

From: Roger Pau Monne <roger.pau@citrix.com>

[ Upstream commit 6214894f49a967c749ee6c07cb00f9cede748df4 ]

The hvc machinery registers both a console and a tty device based on
the hv ops provided by the specific implementation.  Those two
interfaces however have different locks, and there's no single locks
that's shared between the tty and the console implementations, hence
the driver needs to protect itself against concurrent accesses.
Otherwise concurrent calls using the split interfaces are likely to
corrupt the ring indexes, leaving the console unusable.

Introduce a lock to xencons_info to serialize accesses to the shared
ring.  This is only required when using the shared memory console,
concurrent accesses to the hypercall based console implementation are
not an issue.

Note the conditional logic in domU_read_console() is slightly modified
so the notify_daemon() call can be done outside of the locked region:
it's an hypercall and there's no need for it to be done with the lock
held.

Fixes: b536b4b96230 ('xen: use the hvc console infrastructure for Xen console')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221130150919.13935-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/hvc/hvc_xen.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 37809c6c027fc..d9d0232753286 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -43,6 +43,7 @@ struct xencons_info {
 	int irq;
 	int vtermno;
 	grant_ref_t gntref;
+	spinlock_t ring_lock;
 };
 
 static LIST_HEAD(xenconsoles);
@@ -89,12 +90,15 @@ static int __write_console(struct xencons_info *xencons,
 	XENCONS_RING_IDX cons, prod;
 	struct xencons_interface *intf = xencons->intf;
 	int sent = 0;
+	unsigned long flags;
 
+	spin_lock_irqsave(&xencons->ring_lock, flags);
 	cons = intf->out_cons;
 	prod = intf->out_prod;
 	mb();			/* update queue values before going on */
 
 	if ((prod - cons) > sizeof(intf->out)) {
+		spin_unlock_irqrestore(&xencons->ring_lock, flags);
 		pr_err_once("xencons: Illegal ring page indices");
 		return -EINVAL;
 	}
@@ -104,6 +108,7 @@ static int __write_console(struct xencons_info *xencons,
 
 	wmb();			/* write ring before updating pointer */
 	intf->out_prod = prod;
+	spin_unlock_irqrestore(&xencons->ring_lock, flags);
 
 	if (sent)
 		notify_daemon(xencons);
@@ -146,16 +151,19 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
 	int recv = 0;
 	struct xencons_info *xencons = vtermno_to_xencons(vtermno);
 	unsigned int eoiflag = 0;
+	unsigned long flags;
 
 	if (xencons == NULL)
 		return -EINVAL;
 	intf = xencons->intf;
 
+	spin_lock_irqsave(&xencons->ring_lock, flags);
 	cons = intf->in_cons;
 	prod = intf->in_prod;
 	mb();			/* get pointers before reading ring */
 
 	if ((prod - cons) > sizeof(intf->in)) {
+		spin_unlock_irqrestore(&xencons->ring_lock, flags);
 		pr_err_once("xencons: Illegal ring page indices");
 		return -EINVAL;
 	}
@@ -179,10 +187,13 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
 		xencons->out_cons = intf->out_cons;
 		xencons->out_cons_same = 0;
 	}
+	if (!recv && xencons->out_cons_same++ > 1) {
+		eoiflag = XEN_EOI_FLAG_SPURIOUS;
+	}
+	spin_unlock_irqrestore(&xencons->ring_lock, flags);
+
 	if (recv) {
 		notify_daemon(xencons);
-	} else if (xencons->out_cons_same++ > 1) {
-		eoiflag = XEN_EOI_FLAG_SPURIOUS;
 	}
 
 	xen_irq_lateeoi(xencons->irq, eoiflag);
@@ -239,6 +250,7 @@ static int xen_hvm_console_init(void)
 		info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL);
 		if (!info)
 			return -ENOMEM;
+		spin_lock_init(&info->ring_lock);
 	} else if (info->intf != NULL) {
 		/* already configured */
 		return 0;
@@ -275,6 +287,7 @@ static int xen_hvm_console_init(void)
 
 static int xencons_info_pv_init(struct xencons_info *info, int vtermno)
 {
+	spin_lock_init(&info->ring_lock);
 	info->evtchn = xen_start_info->console.domU.evtchn;
 	/* GFN == MFN for PV guest */
 	info->intf = gfn_to_virt(xen_start_info->console.domU.mfn);
@@ -325,6 +338,7 @@ static int xen_initial_domain_console_init(void)
 		info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL);
 		if (!info)
 			return -ENOMEM;
+		spin_lock_init(&info->ring_lock);
 	}
 
 	info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0, false);
@@ -482,6 +496,7 @@ static int xencons_probe(struct xenbus_device *dev,
 	info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
+	spin_lock_init(&info->ring_lock);
 	dev_set_drvdata(&dev->dev, info);
 	info->xbdev = dev;
 	info->vtermno = xenbus_devid_to_vtermno(devid);
-- 
2.39.2

[PATCH 6.1 077/224] ksmbd: add low bound validation to FSCTL_SET_ZERO_DATA

[Greg Kroah-Hartman]

From: Namjae Jeon <linkinjeon@kernel.org>

[ Upstream commit 2d74ec97131b1179a373b6d521f195c84e894eb6 ]

Smatch static checker warning:
 fs/ksmbd/smb2pdu.c:7759 smb2_ioctl()
 warn: no lower bound on 'off'

Fix unexpected result that could caused from negative off and bfz.

Fixes: b5e5f9dfc915 ("ksmbd: check invalid FileOffset and BeyondFinalZero in FSCTL_ZERO_DATA")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ksmbd/smb2pdu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c
index 0f0f1243a9cbf..3bb971831e7ce 100644
--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -7764,7 +7764,7 @@ int smb2_ioctl(struct ksmbd_work *work)
 
 		off = le64_to_cpu(zero_data->FileOffset);
 		bfz = le64_to_cpu(zero_data->BeyondFinalZero);
-		if (off > bfz) {
+		if (off < 0 || bfz < 0 || off > bfz) {
 			ret = -EINVAL;
 			goto out;
 		}
-- 
2.39.2

[PATCH 6.1 078/224] ksmbd: add low bound validation to FSCTL_QUERY_ALLOCATED_RANGES

[Greg Kroah-Hartman]

From: Namjae Jeon <linkinjeon@kernel.org>

[ Upstream commit 342edb60dcda7a409430359b0cac2864bb9dfe44 ]

Smatch static checker warning:
 fs/ksmbd/vfs.c:1040 ksmbd_vfs_fqar_lseek() warn: no lower bound on 'length'
 fs/ksmbd/vfs.c:1041 ksmbd_vfs_fqar_lseek() warn: no lower bound on 'start'

Fix unexpected result that could caused from negative start and length.

Fixes: f44158485826 ("cifsd: add file operations")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ksmbd/smb2pdu.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c
index 3bb971831e7ce..61d12eab0be15 100644
--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -7457,13 +7457,16 @@ static int fsctl_query_allocated_ranges(struct ksmbd_work *work, u64 id,
 	if (in_count == 0)
 		return -EINVAL;
 
+	start = le64_to_cpu(qar_req->file_offset);
+	length = le64_to_cpu(qar_req->length);
+
+	if (start < 0 || length < 0)
+		return -EINVAL;
+
 	fp = ksmbd_lookup_fd_fast(work, id);
 	if (!fp)
 		return -ENOENT;
 
-	start = le64_to_cpu(qar_req->file_offset);
-	length = le64_to_cpu(qar_req->length);
-
 	ret = ksmbd_vfs_fqar_lseek(fp, start, length,
 				   qar_rsp, in_count, out_count);
 	if (ret && ret != -E2BIG)
-- 
2.39.2

[PATCH 6.1 079/224] ksmbd: fix possible refcount leak in smb2_open()

[Greg Kroah-Hartman]

From: ChenXiaoSong <chenxiaosong2@huawei.com>

[ Upstream commit 2624b445544ffc1472ccabfb6ec867c199d4c95c ]

Reference count of acls will leak when memory allocation fails. Fix this
by adding the missing posix_acl_release().

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ksmbd/smb2pdu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c
index 61d12eab0be15..e8c051a3329ec 100644
--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -2994,8 +2994,11 @@ int smb2_open(struct ksmbd_work *work)
 							sizeof(struct smb_acl) +
 							sizeof(struct smb_ace) * ace_num * 2,
 							GFP_KERNEL);
-					if (!pntsd)
+					if (!pntsd) {
+						posix_acl_release(fattr.cf_acls);
+						posix_acl_release(fattr.cf_dacls);
 						goto err_out;
+					}
 
 					rc = build_sec_desc(user_ns,
 							    pntsd, NULL, 0,
-- 
2.39.2

[PATCH 6.1 080/224] Bluetooth: hci_sync: Resume adv with no RPA when active scan

[Greg Kroah-Hartman]

From: Zhengping Jiang <jiangzp@google.com>

[ Upstream commit 3c44a431d62bf4a20d7b901f98266ae3f4676d48 ]

The address resolution should be disabled during the active scan,
so all the advertisements can reach the host. The advertising
has to be paused before disabling the address resolution,
because the advertising will prevent any changes to the resolving
list and the address resolution status. Skipping this will cause
the hci error and the discovery failure.

According to the bluetooth specification:
"7.8.44 LE Set Address Resolution Enable command

This command shall not be used when:
- Advertising (other than periodic advertising) is enabled,
- Scanning is enabled, or
- an HCI_LE_Create_Connection, HCI_LE_Extended_Create_Connection, or
  HCI_LE_Periodic_Advertising_Create_Sync command is outstanding."

If the host is using RPA, the controller needs to generate RPA for
the advertising, so the advertising must remain paused during the
active scan.

If the host is not using RPA, the advertising can be resumed after
disabling the address resolution.

Fixes: 9afc675edeeb ("Bluetooth: hci_sync: allow advertise when scan without RPA")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_sync.c | 64 +++++++++++++++++++++++++++-------------
 1 file changed, 44 insertions(+), 20 deletions(-)

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 3eec688a88a92..13ec3c86a0dcf 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -2367,6 +2367,45 @@ static int hci_resume_advertising_sync(struct hci_dev *hdev)
 	return err;
 }
 
+static int hci_pause_addr_resolution(struct hci_dev *hdev)
+{
+	int err;
+
+	if (!use_ll_privacy(hdev))
+		return 0;
+
+	if (!hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION))
+		return 0;
+
+	/* Cannot disable addr resolution if scanning is enabled or
+	 * when initiating an LE connection.
+	 */
+	if (hci_dev_test_flag(hdev, HCI_LE_SCAN) ||
+	    hci_lookup_le_connect(hdev)) {
+		bt_dev_err(hdev, "Command not allowed when scan/LE connect");
+		return -EPERM;
+	}
+
+	/* Cannot disable addr resolution if advertising is enabled. */
+	err = hci_pause_advertising_sync(hdev);
+	if (err) {
+		bt_dev_err(hdev, "Pause advertising failed: %d", err);
+		return err;
+	}
+
+	err = hci_le_set_addr_resolution_enable_sync(hdev, 0x00);
+	if (err)
+		bt_dev_err(hdev, "Unable to disable Address Resolution: %d",
+			   err);
+
+	/* Return if address resolution is disabled and RPA is not used. */
+	if (!err && scan_use_rpa(hdev))
+		return err;
+
+	hci_resume_advertising_sync(hdev);
+	return err;
+}
+
 struct sk_buff *hci_read_local_oob_data_sync(struct hci_dev *hdev,
 					     bool extended, struct sock *sk)
 {
@@ -2402,7 +2441,7 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
 	u8 filter_policy;
 	int err;
 
-	/* Pause advertising if resolving list can be used as controllers are
+	/* Pause advertising if resolving list can be used as controllers
 	 * cannot accept resolving list modifications while advertising.
 	 */
 	if (use_ll_privacy(hdev)) {
@@ -5376,27 +5415,12 @@ static int hci_active_scan_sync(struct hci_dev *hdev, uint16_t interval)
 
 	cancel_interleave_scan(hdev);
 
-	/* Pause advertising since active scanning disables address resolution
-	 * which advertising depend on in order to generate its RPAs.
-	 */
-	if (use_ll_privacy(hdev) && hci_dev_test_flag(hdev, HCI_PRIVACY)) {
-		err = hci_pause_advertising_sync(hdev);
-		if (err) {
-			bt_dev_err(hdev, "pause advertising failed: %d", err);
-			goto failed;
-		}
-	}
-
-	/* Disable address resolution while doing active scanning since the
-	 * accept list shall not be used and all reports shall reach the host
-	 * anyway.
+	/* Pause address resolution for active scan and stop advertising if
+	 * privacy is enabled.
 	 */
-	err = hci_le_set_addr_resolution_enable_sync(hdev, 0x00);
-	if (err) {
-		bt_dev_err(hdev, "Unable to disable Address Resolution: %d",
-			   err);
+	err = hci_pause_addr_resolution(hdev);
+	if (err)
 		goto failed;
-	}
 
 	/* All active scans will be done with either a resolvable private
 	 * address (when privacy feature has been enabled) or non-resolvable
-- 
2.39.2

[PATCH 6.1 081/224] Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet

[Greg Kroah-Hartman]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 876e78104f23ce9267822757a63562a609b126c3 ]

Because some transports don't have a dedicated type for ISO packets
(see 14202eff214e1e941fefa0366d4c3bc4b1a0d500) they may use ACL type
when in fact they are ISO packets.

In the past this was left for the driver to detect such thing but it
creates a problem when using the likes of btproxy when used by a VM as
the host would not be aware of the connection the guest is doing it
won't be able to detect such behavior, so this make bt_recv_frame
detect when it happens as it is the common interface to all drivers
including guest VMs.

Fixes: 14202eff214e ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index b65c3aabcd536..334e308451f53 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -2871,10 +2871,25 @@ int hci_recv_frame(struct hci_dev *hdev, struct sk_buff *skb)
 		return -ENXIO;
 	}
 
-	if (hci_skb_pkt_type(skb) != HCI_EVENT_PKT &&
-	    hci_skb_pkt_type(skb) != HCI_ACLDATA_PKT &&
-	    hci_skb_pkt_type(skb) != HCI_SCODATA_PKT &&
-	    hci_skb_pkt_type(skb) != HCI_ISODATA_PKT) {
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_EVENT_PKT:
+		break;
+	case HCI_ACLDATA_PKT:
+		/* Detect if ISO packet has been sent as ACL */
+		if (hci_conn_num(hdev, ISO_LINK)) {
+			__u16 handle = __le16_to_cpu(hci_acl_hdr(skb)->handle);
+			__u8 type;
+
+			type = hci_conn_lookup_type(hdev, hci_handle(handle));
+			if (type == ISO_LINK)
+				hci_skb_pkt_type(skb) = HCI_ISODATA_PKT;
+		}
+		break;
+	case HCI_SCODATA_PKT:
+		break;
+	case HCI_ISODATA_PKT:
+		break;
+	default:
 		kfree_skb(skb);
 		return -EINVAL;
 	}
-- 
2.39.2

[PATCH 6.1 082/224] Bluetooth: btusb: Remove detection of ISO packets over bulk

[Greg Kroah-Hartman]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit efe375b716c1c1c9b52a816f5b933a95421020a2 ]

This removes the code introduced by
14202eff214e1e941fefa0366d4c3bc4b1a0d500 as hci_recv_frame is now able
to detect ACL packets that are in fact ISO packets.

Fixes: 14202eff214e ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 952dc9d2404ed..90b85dcb138df 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1020,21 +1020,11 @@ static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
 		hci_skb_expect(skb) -= len;
 
 		if (skb->len == HCI_ACL_HDR_SIZE) {
-			__u16 handle = __le16_to_cpu(hci_acl_hdr(skb)->handle);
 			__le16 dlen = hci_acl_hdr(skb)->dlen;
-			__u8 type;
 
 			/* Complete ACL header */
 			hci_skb_expect(skb) = __le16_to_cpu(dlen);
 
-			/* Detect if ISO packet has been sent over bulk */
-			if (hci_conn_num(data->hdev, ISO_LINK)) {
-				type = hci_conn_lookup_type(data->hdev,
-							    hci_handle(handle));
-				if (type == ISO_LINK)
-					hci_skb_pkt_type(skb) = HCI_ISODATA_PKT;
-			}
-
 			if (skb_tailroom(skb) < hci_skb_expect(skb)) {
 				kfree_skb(skb);
 				skb = NULL;
-- 
2.39.2

[PATCH 6.1 083/224] Bluetooth: ISO: fix timestamped HCI ISO data packet parsing

[Greg Kroah-Hartman]

From: Pauli Virtanen <pav@iki.fi>

[ Upstream commit 2f10e40a948e8a2abe7f983df3959a333ca8955f ]

Use correct HCI ISO data packet header struct when the packet has
timestamp. The timestamp, when present, goes before the other fields
(Core v5.3 4E 5.4.5), so the structs are not compatible.

Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/iso.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c
index 2dabef488eaae..cb959e8eac185 100644
--- a/net/bluetooth/iso.c
+++ b/net/bluetooth/iso.c
@@ -1621,7 +1621,6 @@ static void iso_disconn_cfm(struct hci_conn *hcon, __u8 reason)
 void iso_recv(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
 {
 	struct iso_conn *conn = hcon->iso_data;
-	struct hci_iso_data_hdr *hdr;
 	__u16 pb, ts, len;
 
 	if (!conn)
@@ -1643,6 +1642,8 @@ void iso_recv(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
 		}
 
 		if (ts) {
+			struct hci_iso_ts_data_hdr *hdr;
+
 			/* TODO: add timestamp to the packet? */
 			hdr = skb_pull_data(skb, HCI_ISO_TS_DATA_HDR_SIZE);
 			if (!hdr) {
@@ -1650,15 +1651,19 @@ void iso_recv(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
 				goto drop;
 			}
 
+			len = __le16_to_cpu(hdr->slen);
 		} else {
+			struct hci_iso_data_hdr *hdr;
+
 			hdr = skb_pull_data(skb, HCI_ISO_DATA_HDR_SIZE);
 			if (!hdr) {
 				BT_ERR("Frame is too short (len %d)", skb->len);
 				goto drop;
 			}
+
+			len = __le16_to_cpu(hdr->slen);
 		}
 
-		len    = __le16_to_cpu(hdr->slen);
 		flags  = hci_iso_data_flags(len);
 		len    = hci_iso_data_len(len);
 
-- 
2.39.2

[PATCH 6.1 084/224] Bluetooth: Remove "Power-on" check from Mesh feature

[Greg Kroah-Hartman]

From: Brian Gix <brian.gix@gmail.com>

[ Upstream commit 52dd5e964a55c98c1b0bcf5fc737a5ddd00e7d4d ]

The Bluetooth mesh experimental feature enable was requiring the
controller to be powered off in order for the Enable to work. Mesh is
supposed to be enablable regardless of the controller state, and created
an unintended requirement that the mesh daemon be started before the
classic bluetoothd daemon.

Fixes: af6bcc1921ff ("Bluetooth: Add experimental wrapper for MGMT based mesh")
Signed-off-by: Brian Gix <brian.gix@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/mgmt.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 0dd30a3beb776..7576db8eb83e2 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -4627,12 +4627,6 @@ static int set_mgmt_mesh_func(struct sock *sk, struct hci_dev *hdev,
 				       MGMT_OP_SET_EXP_FEATURE,
 				       MGMT_STATUS_INVALID_INDEX);
 
-	/* Changes can only be made when controller is powered down */
-	if (hdev_is_powered(hdev))
-		return mgmt_cmd_status(sk, hdev->id,
-				       MGMT_OP_SET_EXP_FEATURE,
-				       MGMT_STATUS_REJECTED);
-
 	/* Parameters are limited to a single octet */
 	if (data_len != MGMT_SET_EXP_FEATURE_SIZE + 1)
 		return mgmt_cmd_status(sk, hdev->id,
-- 
2.39.2

[PATCH 6.1 085/224] gve: Cache link_speed value from device

[Greg Kroah-Hartman]

From: Joshua Washington <joshwash@google.com>

[ Upstream commit 68c3e4fc8628b1487c965aabb29207249657eb5f ]

The link speed is never changed for the uptime of a VM, and the current
implementation sends an admin queue command for each call. Admin queue
command invocations have nontrivial overhead (e.g., VM exits), which can
be disruptive to users if triggered frequently. Our telemetry data shows
that there are VMs that make frequent calls to this admin queue command.
Caching the result of the original admin queue command would eliminate
the need to send multiple admin queue commands on subsequent calls to
retrieve link speed.

Fixes: 7e074d5a76ca ("gve: Enable Link Speed Reporting in the driver.")
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230321172332.91678-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/google/gve/gve_ethtool.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/google/gve/gve_ethtool.c b/drivers/net/ethernet/google/gve/gve_ethtool.c
index 7b9a2d9d96243..38df602f2869c 100644
--- a/drivers/net/ethernet/google/gve/gve_ethtool.c
+++ b/drivers/net/ethernet/google/gve/gve_ethtool.c
@@ -535,7 +535,10 @@ static int gve_get_link_ksettings(struct net_device *netdev,
 				  struct ethtool_link_ksettings *cmd)
 {
 	struct gve_priv *priv = netdev_priv(netdev);
-	int err = gve_adminq_report_link_speed(priv);
+	int err = 0;
+
+	if (priv->link_speed == 0)
+		err = gve_adminq_report_link_speed(priv);
 
 	cmd->base.speed = priv->link_speed;
 	return err;
-- 
2.39.2

[PATCH 6.1 086/224] net: asix: fix modprobe "sysfs: cannot create duplicate filename"

[Greg Kroah-Hartman]

From: Grant Grundler <grundler@chromium.org>

[ Upstream commit 8eac0095de355ee31e1b014f79f83d2cd62a2d04 ]

"modprobe asix ; rmmod asix ; modprobe asix" fails with:
   sysfs: cannot create duplicate filename \
   	'/devices/virtual/mdio_bus/usb-003:004'

Issue was originally reported by Anton Lundin on 2022-06-22 (link below).

Chrome OS team hit the same issue in Feb, 2023 when trying to find
work arounds for other issues with AX88172 devices.

The use of devm_mdiobus_register() with usbnet devices results in the
MDIO data being associated with the USB device. When the asix driver
is unloaded, the USB device continues to exist and the corresponding
"mdiobus_unregister()" is NOT called until the USB device is unplugged
or unauthorized. So the next "modprobe asix" will fail because the MDIO
phy sysfs attributes still exist.

The 'easy' (from a design PoV) fix is to use the non-devm variants of
mdiobus_* functions and explicitly manage this use in the asix_bind
and asix_unbind function calls. I've not explored trying to fix usbnet
initialization so devm_* stuff will work.

Fixes: e532a096be0e5 ("net: usb: asix: ax88772: add phylib support")
Reported-by: Anton Lundin <glance@acc.umu.se>
Link: https://lore.kernel.org/netdev/20220623063649.GD23685@pengutronix.de/T/
Tested-by: Eizan Miyamoto <eizan@chromium.org>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Link: https://lore.kernel.org/r/20230321170539.732147-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/asix_devices.c | 32 +++++++++++++++++++++++++++-----
 1 file changed, 27 insertions(+), 5 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 11f60d32be82e..6eacbf17f1c0c 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -666,8 +666,9 @@ static int asix_resume(struct usb_interface *intf)
 static int ax88772_init_mdio(struct usbnet *dev)
 {
 	struct asix_common_private *priv = dev->driver_priv;
+	int ret;
 
-	priv->mdio = devm_mdiobus_alloc(&dev->udev->dev);
+	priv->mdio = mdiobus_alloc();
 	if (!priv->mdio)
 		return -ENOMEM;
 
@@ -679,7 +680,20 @@ static int ax88772_init_mdio(struct usbnet *dev)
 	snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
 		 dev->udev->bus->busnum, dev->udev->devnum);
 
-	return devm_mdiobus_register(&dev->udev->dev, priv->mdio);
+	ret = mdiobus_register(priv->mdio);
+	if (ret) {
+		netdev_err(dev->net, "Could not register MDIO bus (err %d)\n", ret);
+		mdiobus_free(priv->mdio);
+		priv->mdio = NULL;
+	}
+
+	return ret;
+}
+
+static void ax88772_mdio_unregister(struct asix_common_private *priv)
+{
+	mdiobus_unregister(priv->mdio);
+	mdiobus_free(priv->mdio);
 }
 
 static int ax88772_init_phy(struct usbnet *dev)
@@ -897,16 +911,23 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	ret = ax88772_init_mdio(dev);
 	if (ret)
-		return ret;
+		goto mdio_err;
 
 	ret = ax88772_phylink_setup(dev);
 	if (ret)
-		return ret;
+		goto phylink_err;
 
 	ret = ax88772_init_phy(dev);
 	if (ret)
-		phylink_destroy(priv->phylink);
+		goto initphy_err;
 
+	return 0;
+
+initphy_err:
+	phylink_destroy(priv->phylink);
+phylink_err:
+	ax88772_mdio_unregister(priv);
+mdio_err:
 	return ret;
 }
 
@@ -927,6 +948,7 @@ static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
 	phylink_disconnect_phy(priv->phylink);
 	rtnl_unlock();
 	phylink_destroy(priv->phylink);
+	ax88772_mdio_unregister(priv);
 	asix_rx_fixup_common_free(dev->driver_priv);
 }
 
-- 
2.39.2

[PATCH 6.1 087/224] net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()

[Greg Kroah-Hartman]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

[ Upstream commit 8f058a6ef99f0b88a177b58cc46a44ff5112e40a ]

Split the code that enables and disables TRGMII clocks and core clock.
Move enabling and disabling core clock to mt7530_pll_setup() as it's
supposed to be run there.

Add 20 ms delay before enabling the core clock as seen on the U-Boot
MediaTek ethernet driver.

Change the comment for enabling and disabling TRGMII clocks as the code
seems to affect both TXC and RXC.

Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Link: https://source.denx.de/u-boot/u-boot/-/blob/29a48bf9ccba45a5e560bb564bbe76e42629325f/drivers/net/mtk_eth.c#L589
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230320190520.124513-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 1757d6a2c72ae..2c0387dd3f359 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -396,6 +396,9 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
 /* Set up switch core clock for MT7530 */
 static void mt7530_pll_setup(struct mt7530_priv *priv)
 {
+	/* Disable core clock */
+	core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
+
 	/* Disable PLL */
 	core_write(priv, CORE_GSWPLL_GRP1, 0);
 
@@ -409,6 +412,11 @@ static void mt7530_pll_setup(struct mt7530_priv *priv)
 		   RG_GSWPLL_EN_PRE |
 		   RG_GSWPLL_POSDIV_200M(2) |
 		   RG_GSWPLL_FBKDIV_200M(32));
+
+	udelay(20);
+
+	/* Enable core clock */
+	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
 }
 
 /* Setup TX circuit including relevant PAD and driving */
@@ -466,9 +474,8 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 			mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
 				     TD_DM_DRVP(8) | TD_DM_DRVN(8));
 
-		/* Disable MT7530 core and TRGMII Tx clocks */
-		core_clear(priv, CORE_TRGMII_GSW_CLK_CG,
-			   REG_GSWCK_EN | REG_TRGMIICK_EN);
+		/* Disable the MT7530 TRGMII clocks */
+		core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
 
 		/* Setup the MT7530 TRGMII Tx Clock */
 		core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
@@ -485,9 +492,8 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 			   RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
 			   RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
 
-		/* Enable MT7530 core and TRGMII Tx clocks */
-		core_set(priv, CORE_TRGMII_GSW_CLK_CG,
-			 REG_GSWCK_EN | REG_TRGMIICK_EN);
+		/* Enable the MT7530 TRGMII clocks */
+		core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
 	} else {
 		for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
 			mt7530_rmw(priv, MT7530_TRGMII_RD(i),
-- 
2.39.2

[PATCH 6.1 088/224] net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()

[Greg Kroah-Hartman]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

[ Upstream commit fdcc8ccd823740c18e803b886cec461bc0e64201 ]

Move lowering the TRGMII Tx clock driving to mt7530_setup(), after setting
the core clock, as seen on the U-Boot MediaTek ethernet driver.

Move the code which looks like it lowers the TRGMII Rx clock driving to
after the TRGMII Tx clock driving is lowered. This is run after lowering
the Tx clock driving on the U-Boot MediaTek ethernet driver as well.

This way, the switch should consume less power regardless of port 6 being
used.

Update the comment explaining mt7530_pad_clk_setup().

Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Link: https://source.denx.de/u-boot/u-boot/-/blob/29a48bf9ccba45a5e560bb564bbe76e42629325f/drivers/net/mtk_eth.c#L682
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230320190520.124513-2-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 2c0387dd3f359..b4a679cbc95cf 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -419,12 +419,12 @@ static void mt7530_pll_setup(struct mt7530_priv *priv)
 	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
 }
 
-/* Setup TX circuit including relevant PAD and driving */
+/* Setup port 6 interface mode and TRGMII TX circuit */
 static int
 mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 {
 	struct mt7530_priv *priv = ds->priv;
-	u32 ncpo1, ssc_delta, trgint, i, xtal;
+	u32 ncpo1, ssc_delta, trgint, xtal;
 
 	xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
 
@@ -469,11 +469,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 		   P6_INTF_MODE(trgint));
 
 	if (trgint) {
-		/* Lower Tx Driving for TRGMII path */
-		for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
-			mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
-				     TD_DM_DRVP(8) | TD_DM_DRVN(8));
-
 		/* Disable the MT7530 TRGMII clocks */
 		core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
 
@@ -494,10 +489,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 
 		/* Enable the MT7530 TRGMII clocks */
 		core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
-	} else {
-		for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
-			mt7530_rmw(priv, MT7530_TRGMII_RD(i),
-				   RD_TAP_MASK, RD_TAP(16));
 	}
 
 	return 0;
@@ -2212,6 +2203,15 @@ mt7530_setup(struct dsa_switch *ds)
 
 	mt7530_pll_setup(priv);
 
+	/* Lower Tx driving for TRGMII path */
+	for (i = 0; i < NUM_TRGMII_CTRL; i++)
+		mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
+			     TD_DM_DRVP(8) | TD_DM_DRVN(8));
+
+	for (i = 0; i < NUM_TRGMII_CTRL; i++)
+		mt7530_rmw(priv, MT7530_TRGMII_RD(i),
+			   RD_TAP_MASK, RD_TAP(16));
+
 	/* Enable port 6 */
 	val = mt7530_read(priv, MT7530_MHWTRAP);
 	val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
-- 
2.39.2

[PATCH 6.1 089/224] net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case

[Greg Kroah-Hartman]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

[ Upstream commit 407b508bdd70b6848993843d96ed49ac4108fb52 ]

Move setting the ssc_delta variable to under the PHY_INTERFACE_MODE_TRGMII
case as it's only needed when trgmii is used.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230320190520.124513-3-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index b4a679cbc95cf..38bf760b5b5ee 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -441,6 +441,10 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 		break;
 	case PHY_INTERFACE_MODE_TRGMII:
 		trgint = 1;
+		if (xtal == HWTRAP_XTAL_25MHZ)
+			ssc_delta = 0x57;
+		else
+			ssc_delta = 0x87;
 		if (priv->id == ID_MT7621) {
 			/* PLL frequency: 150MHz: 1.2GBit */
 			if (xtal == HWTRAP_XTAL_40MHZ)
@@ -460,11 +464,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
 		return -EINVAL;
 	}
 
-	if (xtal == HWTRAP_XTAL_25MHZ)
-		ssc_delta = 0x57;
-	else
-		ssc_delta = 0x87;
-
 	mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
 		   P6_INTF_MODE(trgint));
 
-- 
2.39.2

[PATCH 6.1 090/224] net: mdio: thunder: Add missing fwnode_handle_put()

[Greg Kroah-Hartman]

From: Liang He <windhl@126.com>

[ Upstream commit b1de5c78ebe9858ccec9d49af2f76724f1d47e3e ]

In device_for_each_child_node(), we should add fwnode_handle_put()
when break out of the iteration device_for_each_child_node()
as it will automatically increase and decrease the refcounter.

Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/mdio/mdio-thunder.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/mdio/mdio-thunder.c b/drivers/net/mdio/mdio-thunder.c
index 822d2cdd2f359..394b864aaa372 100644
--- a/drivers/net/mdio/mdio-thunder.c
+++ b/drivers/net/mdio/mdio-thunder.c
@@ -104,6 +104,7 @@ static int thunder_mdiobus_pci_probe(struct pci_dev *pdev,
 		if (i >= ARRAY_SIZE(nexus->buses))
 			break;
 	}
+	fwnode_handle_put(fwn);
 	return 0;
 
 err_release_regions:
-- 
2.39.2

[PATCH 6.1 091/224] drm/amd/display: Set dcn32 caps.seamless_odm

[Greg Kroah-Hartman]

From: Hersen Wu <hersenxs.wu@amd.com>

[ Upstream commit f9537b1fa7fb51c2162bc15ce469cbbf1ca0fbfe ]

[Why & How]
seamless_odm set was not picked up while
merging commit 2d017189e2b3 ("drm/amd/display:
Blank eDP on enable drv if odm enabled")

Fixes: 2d017189e2b3 ("drm/amd/display: Blank eDP on enable drv if odm enabled")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
index 26fc5cad7a770..a942e2812183a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c
@@ -2142,6 +2142,7 @@ static bool dcn32_resource_construct(
 	dc->caps.edp_dsc_support = true;
 	dc->caps.extended_aux_timeout_support = true;
 	dc->caps.dmcub_support = true;
+	dc->caps.seamless_odm = true;
 
 	/* Color pipeline capabilities */
 	dc->caps.color.dpp.dcn_arch = 1;
-- 
2.39.2

[PATCH 6.1 092/224] Bluetooth: btqcomsmd: Fix command timeout after setting BD address

[Greg Kroah-Hartman]

From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>

[ Upstream commit 5d44ab9e204200a78ad55cdf185aa2bb109b5950 ]

On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c
and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs)
the Bluetooth firmware seems to become unresponsive for a while after
setting the BD address. On recent kernel versions (at least 5.17+)
this often causes timeouts for subsequent commands, e.g. the HCI reset
sent by the Bluetooth core during initialization:

    Bluetooth: hci0: Opcode 0x c03 failed: -110

Unfortunately this behavior does not seem to be documented anywhere.
Experimentation suggests that the minimum necessary delay to avoid
the problem is ~150us. However, to be sure add a sleep for > 1ms
in case it is a bit longer on other firmware versions.

Older kernel versions are likely also affected, although perhaps with
slightly different errors or less probability. Side effects can easily
hide the issue in most cases, e.g. unrelated incoming interrupts that
cause the necessary delay.

Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btqcomsmd.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c
index 2acb719e596f5..11c7e04bf3947 100644
--- a/drivers/bluetooth/btqcomsmd.c
+++ b/drivers/bluetooth/btqcomsmd.c
@@ -122,6 +122,21 @@ static int btqcomsmd_setup(struct hci_dev *hdev)
 	return 0;
 }
 
+static int btqcomsmd_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	int ret;
+
+	ret = qca_set_bdaddr_rome(hdev, bdaddr);
+	if (ret)
+		return ret;
+
+	/* The firmware stops responding for a while after setting the bdaddr,
+	 * causing timeouts for subsequent commands. Sleep a bit to avoid this.
+	 */
+	usleep_range(1000, 10000);
+	return 0;
+}
+
 static int btqcomsmd_probe(struct platform_device *pdev)
 {
 	struct btqcomsmd *btq;
@@ -162,7 +177,7 @@ static int btqcomsmd_probe(struct platform_device *pdev)
 	hdev->close = btqcomsmd_close;
 	hdev->send = btqcomsmd_send;
 	hdev->setup = btqcomsmd_setup;
-	hdev->set_bdaddr = qca_set_bdaddr_rome;
+	hdev->set_bdaddr = btqcomsmd_set_bdaddr;
 
 	ret = hci_register_dev(hdev);
 	if (ret < 0)
-- 
2.39.2

[PATCH 6.1 093/224] Bluetooth: L2CAP: Fix responding with wrong PDU type

[Greg Kroah-Hartman]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 9aa9d9473f1550d1936c31259720b3f1f4690576 ]

L2CAP_ECRED_CONN_REQ shall be responded with L2CAP_ECRED_CONN_RSP not
L2CAP_LE_CONN_RSP:

L2CAP LE EATT Server - Reject - run
  Listening for connections
  New client connection with handle 0x002a
  Sending L2CAP Request from client
  Client received response code 0x15
  Unexpected L2CAP response code (expected 0x18)
L2CAP LE EATT Server - Reject - test failed

> ACL Data RX: Handle 42 flags 0x02 dlen 26
      LE L2CAP: Enhanced Credit Connection Request (0x17) ident 1 len 18
        PSM: 39 (0x0027)
        MTU: 64
        MPS: 64
        Credits: 5
        Source CID: 65
        Source CID: 66
        Source CID: 67
        Source CID: 68
        Source CID: 69
< ACL Data TX: Handle 42 flags 0x00 dlen 16
      LE L2CAP: LE Connection Response (0x15) ident 1 len 8
        invalid size
        00 00 00 00 00 00 06 00

L2CAP LE EATT Server - Reject - run
  Listening for connections
  New client connection with handle 0x002a
  Sending L2CAP Request from client
  Client received response code 0x18
L2CAP LE EATT Server - Reject - test passed

Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 117 +++++++++++++++++++++++++------------
 1 file changed, 79 insertions(+), 38 deletions(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index da85768b04b76..b6f69d1feeeec 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -708,6 +708,17 @@ void l2cap_chan_del(struct l2cap_chan *chan, int err)
 }
 EXPORT_SYMBOL_GPL(l2cap_chan_del);
 
+static void __l2cap_chan_list_id(struct l2cap_conn *conn, u16 id,
+				 l2cap_chan_func_t func, void *data)
+{
+	struct l2cap_chan *chan, *l;
+
+	list_for_each_entry_safe(chan, l, &conn->chan_l, list) {
+		if (chan->ident == id)
+			func(chan, data);
+	}
+}
+
 static void __l2cap_chan_list(struct l2cap_conn *conn, l2cap_chan_func_t func,
 			      void *data)
 {
@@ -775,23 +786,9 @@ static void l2cap_chan_le_connect_reject(struct l2cap_chan *chan)
 
 static void l2cap_chan_ecred_connect_reject(struct l2cap_chan *chan)
 {
-	struct l2cap_conn *conn = chan->conn;
-	struct l2cap_ecred_conn_rsp rsp;
-	u16 result;
-
-	if (test_bit(FLAG_DEFER_SETUP, &chan->flags))
-		result = L2CAP_CR_LE_AUTHORIZATION;
-	else
-		result = L2CAP_CR_LE_BAD_PSM;
-
 	l2cap_state_change(chan, BT_DISCONN);
 
-	memset(&rsp, 0, sizeof(rsp));
-
-	rsp.result  = cpu_to_le16(result);
-
-	l2cap_send_cmd(conn, chan->ident, L2CAP_LE_CONN_RSP, sizeof(rsp),
-		       &rsp);
+	__l2cap_ecred_conn_rsp_defer(chan);
 }
 
 static void l2cap_chan_connect_reject(struct l2cap_chan *chan)
@@ -846,7 +843,7 @@ void l2cap_chan_close(struct l2cap_chan *chan, int reason)
 					break;
 				case L2CAP_MODE_EXT_FLOWCTL:
 					l2cap_chan_ecred_connect_reject(chan);
-					break;
+					return;
 				}
 			}
 		}
@@ -3938,43 +3935,86 @@ void __l2cap_le_connect_rsp_defer(struct l2cap_chan *chan)
 		       &rsp);
 }
 
-void __l2cap_ecred_conn_rsp_defer(struct l2cap_chan *chan)
+static void l2cap_ecred_list_defer(struct l2cap_chan *chan, void *data)
 {
+	int *result = data;
+
+	if (*result || test_bit(FLAG_ECRED_CONN_REQ_SENT, &chan->flags))
+		return;
+
+	switch (chan->state) {
+	case BT_CONNECT2:
+		/* If channel still pending accept add to result */
+		(*result)++;
+		return;
+	case BT_CONNECTED:
+		return;
+	default:
+		/* If not connected or pending accept it has been refused */
+		*result = -ECONNREFUSED;
+		return;
+	}
+}
+
+struct l2cap_ecred_rsp_data {
 	struct {
 		struct l2cap_ecred_conn_rsp rsp;
-		__le16 dcid[5];
+		__le16 scid[L2CAP_ECRED_MAX_CID];
 	} __packed pdu;
+	int count;
+};
+
+static void l2cap_ecred_rsp_defer(struct l2cap_chan *chan, void *data)
+{
+	struct l2cap_ecred_rsp_data *rsp = data;
+
+	if (test_bit(FLAG_ECRED_CONN_REQ_SENT, &chan->flags))
+		return;
+
+	/* Reset ident so only one response is sent */
+	chan->ident = 0;
+
+	/* Include all channels pending with the same ident */
+	if (!rsp->pdu.rsp.result)
+		rsp->pdu.rsp.dcid[rsp->count++] = cpu_to_le16(chan->scid);
+	else
+		l2cap_chan_del(chan, ECONNRESET);
+}
+
+void __l2cap_ecred_conn_rsp_defer(struct l2cap_chan *chan)
+{
 	struct l2cap_conn *conn = chan->conn;
-	u16 ident = chan->ident;
-	int i = 0;
+	struct l2cap_ecred_rsp_data data;
+	u16 id = chan->ident;
+	int result = 0;
 
-	if (!ident)
+	if (!id)
 		return;
 
-	BT_DBG("chan %p ident %d", chan, ident);
+	BT_DBG("chan %p id %d", chan, id);
 
-	pdu.rsp.mtu     = cpu_to_le16(chan->imtu);
-	pdu.rsp.mps     = cpu_to_le16(chan->mps);
-	pdu.rsp.credits = cpu_to_le16(chan->rx_credits);
-	pdu.rsp.result  = cpu_to_le16(L2CAP_CR_LE_SUCCESS);
+	memset(&data, 0, sizeof(data));
 
-	mutex_lock(&conn->chan_lock);
+	data.pdu.rsp.mtu     = cpu_to_le16(chan->imtu);
+	data.pdu.rsp.mps     = cpu_to_le16(chan->mps);
+	data.pdu.rsp.credits = cpu_to_le16(chan->rx_credits);
+	data.pdu.rsp.result  = cpu_to_le16(L2CAP_CR_LE_SUCCESS);
 
-	list_for_each_entry(chan, &conn->chan_l, list) {
-		if (chan->ident != ident)
-			continue;
+	/* Verify that all channels are ready */
+	__l2cap_chan_list_id(conn, id, l2cap_ecred_list_defer, &result);
 
-		/* Reset ident so only one response is sent */
-		chan->ident = 0;
+	if (result > 0)
+		return;
 
-		/* Include all channels pending with the same ident */
-		pdu.dcid[i++] = cpu_to_le16(chan->scid);
-	}
+	if (result < 0)
+		data.pdu.rsp.result = cpu_to_le16(L2CAP_CR_LE_AUTHORIZATION);
 
-	mutex_unlock(&conn->chan_lock);
+	/* Build response */
+	__l2cap_chan_list_id(conn, id, l2cap_ecred_rsp_defer, &data);
 
-	l2cap_send_cmd(conn, ident, L2CAP_ECRED_CONN_RSP,
-			sizeof(pdu.rsp) + i * sizeof(__le16), &pdu);
+	l2cap_send_cmd(conn, id, L2CAP_ECRED_CONN_RSP,
+		       sizeof(data.pdu.rsp) + (data.count * sizeof(__le16)),
+		       &data.pdu);
 }
 
 void __l2cap_connect_rsp_defer(struct l2cap_chan *chan)
@@ -6078,6 +6118,7 @@ static inline int l2cap_ecred_conn_req(struct l2cap_conn *conn,
 		__set_chan_timer(chan, chan->ops->get_sndtimeo(chan));
 
 		chan->ident = cmd->ident;
+		chan->mode = L2CAP_MODE_EXT_FLOWCTL;
 
 		if (test_bit(FLAG_DEFER_SETUP, &chan->flags)) {
 			l2cap_state_change(chan, BT_CONNECT2);
-- 
2.39.2

[PATCH 6.1 094/224] Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work

[Greg Kroah-Hartman]

From: Zheng Wang <zyytlz.wz@163.com>

[ Upstream commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f ]

In btsdio_probe, &data->work was bound with btsdio_work.In
btsdio_send_frame, it was started by schedule_work.

If we call btsdio_remove with an unfinished job, there may
be a race condition and cause UAF bug on hdev.

Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btsdio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index 795be33f2892d..02893600db390 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -354,6 +354,7 @@ static void btsdio_remove(struct sdio_func *func)
 
 	BT_DBG("func %p", func);
 
+	cancel_work_sync(&data->work);
 	if (!data)
 		return;
 
-- 
2.39.2

[PATCH 6.1 095/224] Bluetooth: mgmt: Fix MGMT add advmon with RSSI command

[Greg Kroah-Hartman]

From: Howard Chung <howardchung@google.com>

[ Upstream commit 1a0291f81529e8044fb29845a0196ba47af894ce ]

The MGMT command: MGMT_OP_ADD_ADV_PATTERNS_MONITOR_RSSI uses variable
length argument. This causes host not able to register advmon with rssi.

This patch has been locally tested by adding monitor with rssi via
btmgmt on a kernel 6.1 machine.

Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh")
Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/mgmt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 7576db8eb83e2..fc4ba0884da96 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -9346,7 +9346,8 @@ static const struct hci_mgmt_handler mgmt_handlers[] = {
 	{ add_ext_adv_data,        MGMT_ADD_EXT_ADV_DATA_SIZE,
 						HCI_MGMT_VAR_LEN },
 	{ add_adv_patterns_monitor_rssi,
-				   MGMT_ADD_ADV_PATTERNS_MONITOR_RSSI_SIZE },
+				   MGMT_ADD_ADV_PATTERNS_MONITOR_RSSI_SIZE,
+						HCI_MGMT_VAR_LEN },
 	{ set_mesh,                MGMT_SET_MESH_RECEIVER_SIZE,
 						HCI_MGMT_VAR_LEN },
 	{ mesh_features,           MGMT_MESH_READ_FEATURES_SIZE },
-- 
2.39.2

[PATCH 6.1 096/224] Bluetooth: HCI: Fix global-out-of-bounds

[Greg Kroah-Hartman]

From: Sungwoo Kim <iam@sung-woo.kim>

[ Upstream commit bce56405201111807cc8e4f47c6de3e10b17c1ac ]

To loop a variable-length array, hci_init_stage_sync(stage) considers
that stage[i] is valid as long as stage[i-1].func is valid.
Thus, the last element of stage[].func should be intentionally invalid
as hci_init0[], le_init2[], and others did.
However, amp_init1[] and amp_init2[] have no invalid element, letting
hci_init_stage_sync() keep accessing amp_init1[] over its valid range.
This patch fixes this by adding {} in the last of amp_init1[] and
amp_init2[].

==================================================================
BUG: KASAN: global-out-of-bounds in hci_dev_open_sync (
/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
/v6.2-bzimage/net/bluetooth/hci_sync.c:3343
/v6.2-bzimage/net/bluetooth/hci_sync.c:4418
/v6.2-bzimage/net/bluetooth/hci_sync.c:4609
/v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
Read of size 8 at addr ffffffffaed1ab70 by task kworker/u5:0/1032
CPU: 0 PID: 1032 Comm: kworker/u5:0 Not tainted 6.2.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04
Workqueue: hci1 hci_power_on
Call Trace:
 <TASK>
dump_stack_lvl (/v6.2-bzimage/lib/dump_stack.c:107 (discriminator 1))
print_report (/v6.2-bzimage/mm/kasan/report.c:307
  /v6.2-bzimage/mm/kasan/report.c:417)
? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
  /v6.2-bzimage/net/bluetooth/hci_sync.c:3343
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4418
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4609
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
kasan_report (/v6.2-bzimage/mm/kasan/report.c:184
  /v6.2-bzimage/mm/kasan/report.c:519)
? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
  /v6.2-bzimage/net/bluetooth/hci_sync.c:3343
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4418
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4609
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
  /v6.2-bzimage/net/bluetooth/hci_sync.c:3343
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4418
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4609
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
? __pfx_hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:4635)
? mutex_lock (/v6.2-bzimage/./arch/x86/include/asm/atomic64_64.h:190
  /v6.2-bzimage/./include/linux/atomic/atomic-long.h:443
  /v6.2-bzimage/./include/linux/atomic/atomic-instrumented.h:1781
  /v6.2-bzimage/kernel/locking/mutex.c:171
  /v6.2-bzimage/kernel/locking/mutex.c:285)
? __pfx_mutex_lock (/v6.2-bzimage/kernel/locking/mutex.c:282)
hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:485
  /v6.2-bzimage/net/bluetooth/hci_core.c:984)
? __pfx_hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:969)
? read_word_at_a_time (/v6.2-bzimage/./include/asm-generic/rwonce.h:85)
? strscpy (/v6.2-bzimage/./arch/x86/include/asm/word-at-a-time.h:62
  /v6.2-bzimage/lib/string.c:161)
process_one_work (/v6.2-bzimage/kernel/workqueue.c:2294)
worker_thread (/v6.2-bzimage/./include/linux/list.h:292
  /v6.2-bzimage/kernel/workqueue.c:2437)
? __pfx_worker_thread (/v6.2-bzimage/kernel/workqueue.c:2379)
kthread (/v6.2-bzimage/kernel/kthread.c:376)
? __pfx_kthread (/v6.2-bzimage/kernel/kthread.c:331)
ret_from_fork (/v6.2-bzimage/arch/x86/entry/entry_64.S:314)
 </TASK>
The buggy address belongs to the variable:
amp_init1+0x30/0x60
The buggy address belongs to the physical page:
page:000000003a157ec6 refcount:1 mapcount:0 mapping:0000000000000000 ia
flags: 0x200000000001000(reserved|node=0|zone=2)
raw: 0200000000001000 ffffea0005054688 ffffea0005054688 000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
 ffffffffaed1aa00: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 00
 ffffffffaed1aa80: 00 00 00 00 f9 f9 f9 f9 00 00 00 00 00 00 00 00
>ffffffffaed1ab00: 00 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 f9 f9
                                                             ^
 ffffffffaed1ab80: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 f9
 ffffffffaed1ac00: f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9 00 00 02 f9

This bug is found by FuzzBT, a modified version of Syzkaller.
Other contributors for this bug are Ruoyu Wu and Peng Hui.

Fixes: d0b137062b2d ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_sync.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 13ec3c86a0dcf..f886c1d05c882 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -3340,6 +3340,7 @@ static const struct hci_init_stage amp_init1[] = {
 	HCI_INIT(hci_read_flow_control_mode_sync),
 	/* HCI_OP_READ_LOCATION_DATA */
 	HCI_INIT(hci_read_location_data_sync),
+	{}
 };
 
 static int hci_init1_sync(struct hci_dev *hdev)
@@ -3374,6 +3375,7 @@ static int hci_init1_sync(struct hci_dev *hdev)
 static const struct hci_init_stage amp_init2[] = {
 	/* HCI_OP_READ_LOCAL_FEATURES */
 	HCI_INIT(hci_read_local_features_sync),
+	{}
 };
 
 /* Read Buffer Size (ACL mtu, max pkt, etc.) */
-- 
2.39.2

[PATCH 6.1 097/224] platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl

[Greg Kroah-Hartman]

From: Tzung-Bi Shih <tzungbi@kernel.org>

[ Upstream commit b20cf3f89c56b5f6a38b7f76a8128bf9f291bbd3 ]

It is possible to peep kernel page's data by providing larger `insize`
in struct cros_ec_command[1] when invoking EC host commands.

Fix it by using zeroed memory.

[1]: https://elixir.bootlin.com/linux/v6.2/source/include/linux/platform_data/cros_ec_proto.h#L74

Fixes: eda2e30c6684 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230324010658.1082361-1-tzungbi@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/chrome/cros_ec_chardev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/chrome/cros_ec_chardev.c b/drivers/platform/chrome/cros_ec_chardev.c
index 0de7c255254e0..d6de5a2941282 100644
--- a/drivers/platform/chrome/cros_ec_chardev.c
+++ b/drivers/platform/chrome/cros_ec_chardev.c
@@ -284,7 +284,7 @@ static long cros_ec_chardev_ioctl_xcmd(struct cros_ec_dev *ec, void __user *arg)
 	    u_cmd.insize > EC_MAX_MSG_BYTES)
 		return -EINVAL;
 
-	s_cmd = kmalloc(sizeof(*s_cmd) + max(u_cmd.outsize, u_cmd.insize),
+	s_cmd = kzalloc(sizeof(*s_cmd) + max(u_cmd.outsize, u_cmd.insize),
 			GFP_KERNEL);
 	if (!s_cmd)
 		return -ENOMEM;
-- 
2.39.2

[PATCH 6.1 098/224] entry: Fix noinstr warning in __enter_from_user_mode()

[Greg Kroah-Hartman]

From: Josh Poimboeuf <jpoimboe@kernel.org>

[ Upstream commit f87d28673b71b35b248231a2086f9404afbb7f28 ]

__enter_from_user_mode() is triggering noinstr warnings with
CONFIG_DEBUG_PREEMPT due to its call of preempt_count_add() via
ct_state().

The preemption disable isn't needed as interrupts are already disabled.
And the context_tracking_enabled() check in ct_state() also isn't needed
as that's already being done by the CT_WARN_ON().

Just use __ct_state() instead.

Fixes the following warnings:

  vmlinux.o: warning: objtool: enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section
  vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0xf9: call to preempt_count_add() leaves .noinstr.text section
  vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0xc7: call to preempt_count_add() leaves .noinstr.text section
  vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section

Fixes: 171476775d32 ("context_tracking: Convert state to atomic_t")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/d8955fa6d68dc955dda19baf13ae014ae27926f5.1677369694.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/context_tracking.h       | 1 +
 include/linux/context_tracking_state.h | 2 ++
 kernel/entry/common.c                  | 2 +-
 3 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/include/linux/context_tracking.h b/include/linux/context_tracking.h
index d4afa8508a806..3a7909ed54980 100644
--- a/include/linux/context_tracking.h
+++ b/include/linux/context_tracking.h
@@ -96,6 +96,7 @@ static inline void user_exit_irqoff(void) { }
 static inline int exception_enter(void) { return 0; }
 static inline void exception_exit(enum ctx_state prev_ctx) { }
 static inline int ct_state(void) { return -1; }
+static inline int __ct_state(void) { return -1; }
 static __always_inline bool context_tracking_guest_enter(void) { return false; }
 static inline void context_tracking_guest_exit(void) { }
 #define CT_WARN_ON(cond) do { } while (0)
diff --git a/include/linux/context_tracking_state.h b/include/linux/context_tracking_state.h
index 4a4d56f771802..fdd537ea513ff 100644
--- a/include/linux/context_tracking_state.h
+++ b/include/linux/context_tracking_state.h
@@ -46,7 +46,9 @@ struct context_tracking {
 
 #ifdef CONFIG_CONTEXT_TRACKING
 DECLARE_PER_CPU(struct context_tracking, context_tracking);
+#endif
 
+#ifdef CONFIG_CONTEXT_TRACKING_USER
 static __always_inline int __ct_state(void)
 {
 	return arch_atomic_read(this_cpu_ptr(&context_tracking.state)) & CT_STATE_MASK;
diff --git a/kernel/entry/common.c b/kernel/entry/common.c
index 846add8394c41..1314894d2efad 100644
--- a/kernel/entry/common.c
+++ b/kernel/entry/common.c
@@ -21,7 +21,7 @@ static __always_inline void __enter_from_user_mode(struct pt_regs *regs)
 	arch_enter_from_user_mode(regs);
 	lockdep_hardirqs_off(CALLER_ADDR0);
 
-	CT_WARN_ON(ct_state() != CONTEXT_USER);
+	CT_WARN_ON(__ct_state() != CONTEXT_USER);
 	user_exit_irqoff();
 
 	instrumentation_begin();
-- 
2.39.2

[PATCH 6.1 099/224] perf/x86/amd/core: Always clear status for idx

[Greg Kroah-Hartman]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 263f5ecaf7080513efc248ec739b6d9e00f4129f ]

The variable 'status' (which contains the unhandled overflow bits) is
not being properly masked in some cases, displaying the following
warning:

  WARNING: CPU: 156 PID: 475601 at arch/x86/events/amd/core.c:972 amd_pmu_v2_handle_irq+0x216/0x270

This seems to be happening because the loop is being continued before
the status bit being unset, in case x86_perf_event_set_period()
returns 0. This is also causing an inconsistency because the "handled"
counter is incremented, but the status bit is not cleaned.

Move the bit cleaning together above, together when the "handled"
counter is incremented.

Fixes: 7685665c390d ("perf/x86/amd/core: Add PerfMonV2 overflow handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20230321113338.1669660-1-leitao@debian.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/amd/core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c
index 4386b10682ce4..8ca5e827f30b2 100644
--- a/arch/x86/events/amd/core.c
+++ b/arch/x86/events/amd/core.c
@@ -923,6 +923,7 @@ static int amd_pmu_v2_handle_irq(struct pt_regs *regs)
 
 		/* Event overflow */
 		handled++;
+		status &= ~mask;
 		perf_sample_data_init(&data, 0, hwc->last_period);
 
 		if (!x86_perf_event_set_period(event))
@@ -935,8 +936,6 @@ static int amd_pmu_v2_handle_irq(struct pt_regs *regs)
 
 		if (perf_event_overflow(event, &data, regs))
 			x86_pmu_stop(event, 0);
-
-		status &= ~mask;
 	}
 
 	/*
-- 
2.39.2

[PATCH 6.1 100/224] entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-up

[Greg Kroah-Hartman]

From: Frederic Weisbecker <frederic@kernel.org>

[ Upstream commit b416514054810cf2d2cc348ae477cea619b64da7 ]

RCU sometimes needs to perform a delayed wake up for specific kthreads
handling offloaded callbacks (RCU_NOCB).  These wakeups are performed
by timers and upon entry to idle (also to guest and to user on nohz_full).

However the delayed wake-up on kernel exit is actually performed after
the thread flags are fetched towards the fast path check for work to
do on exit to user. As a result, and if there is no other pending work
to do upon that kernel exit, the current task will resume to userspace
with TIF_RESCHED set and the pending wake up ignored.

Fix this with fetching the thread flags _after_ the delayed RCU-nocb
kthread wake-up.

Fixes: 47b8ff194c1f ("entry: Explicitly flush pending rcuog wakeup before last rescheduling point")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230315194349.10798-3-joel@joelfernandes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/entry/common.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/entry/common.c b/kernel/entry/common.c
index 1314894d2efad..be61332c66b54 100644
--- a/kernel/entry/common.c
+++ b/kernel/entry/common.c
@@ -192,13 +192,14 @@ static unsigned long exit_to_user_mode_loop(struct pt_regs *regs,
 
 static void exit_to_user_mode_prepare(struct pt_regs *regs)
 {
-	unsigned long ti_work = read_thread_flags();
+	unsigned long ti_work;
 
 	lockdep_assert_irqs_disabled();
 
 	/* Flush pending rcuog wakeup before the last need_resched() check */
 	tick_nohz_user_enter_prepare();
 
+	ti_work = read_thread_flags();
 	if (unlikely(ti_work & EXIT_TO_USER_MODE_WORK))
 		ti_work = exit_to_user_mode_loop(regs, ti_work);
 
-- 
2.39.2

[PATCH 6.1 101/224] hwmon: fix potential sensor registration fail if of_node is missing

[Greg Kroah-Hartman]

From: Phinex Hung <phinex@realtek.com>

[ Upstream commit 2315332efcbe7124252f080e03b57d3d2f1f4771 ]

It is not sufficient to check of_node in current device.
In some cases, this would cause the sensor registration to fail.

This patch looks for device's ancestors to find a valid of_node if any.

Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API")
Signed-off-by: Phinex Hung <phinex@realtek.com>
Link: https://lore.kernel.org/r/20230321060224.3819-1-phinex@realtek.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/hwmon.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index 4218750d5a66b..9ed34b2e1f499 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -756,6 +756,7 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata,
 	struct hwmon_device *hwdev;
 	const char *label;
 	struct device *hdev;
+	struct device *tdev = dev;
 	int i, err, id;
 
 	/* Complain about invalid characters in hwmon name attribute */
@@ -825,7 +826,9 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata,
 	hwdev->name = name;
 	hdev->class = &hwmon_class;
 	hdev->parent = dev;
-	hdev->of_node = dev ? dev->of_node : NULL;
+	while (tdev && !tdev->of_node)
+		tdev = tdev->parent;
+	hdev->of_node = tdev ? tdev->of_node : NULL;
 	hwdev->chip = chip;
 	dev_set_drvdata(hdev, drvdata);
 	dev_set_name(hdev, HWMON_ID_FORMAT, id);
@@ -837,7 +840,7 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata,
 
 	INIT_LIST_HEAD(&hwdev->tzdata);
 
-	if (dev && dev->of_node && chip && chip->ops->read &&
+	if (hdev->of_node && chip && chip->ops->read &&
 	    chip->info[0]->type == hwmon_chip &&
 	    (chip->info[0]->config[0] & HWMON_C_REGISTER_TZ)) {
 		err = hwmon_thermal_register_sensors(hdev);
-- 
2.39.2

[PATCH 6.1 102/224] hwmon (it87): Fix voltage scaling for chips with 10.9mV ADCs

[Greg Kroah-Hartman]

From: Frank Crawford <frank@crawford.emu.id.au>

[ Upstream commit 968b66ffeb7956acc72836a7797aeb7b2444ec51 ]

Fix voltage scaling for chips that have 10.9mV ADCs, where scaling was
not performed.

Fixes: ead8080351c9 ("hwmon: (it87) Add support for IT8732F")
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20230318080543.1226700-2-frank@crawford.emu.id.au
[groeck: Update subject and description to focus on bug fix]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/it87.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 7bd154ba351b9..b45bd3aa5a653 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -486,6 +486,8 @@ static const struct it87_devices it87_devices[] = {
 #define has_pwm_freq2(data)	((data)->features & FEAT_PWM_FREQ2)
 #define has_six_temp(data)	((data)->features & FEAT_SIX_TEMP)
 #define has_vin3_5v(data)	((data)->features & FEAT_VIN3_5V)
+#define has_scaling(data)	((data)->features & (FEAT_12MV_ADC | \
+						     FEAT_10_9MV_ADC))
 
 struct it87_sio_data {
 	int sioaddr;
@@ -3098,7 +3100,7 @@ static int it87_probe(struct platform_device *pdev)
 			 "Detected broken BIOS defaults, disabling PWM interface\n");
 
 	/* Starting with IT8721F, we handle scaling of internal voltages */
-	if (has_12mv_adc(data)) {
+	if (has_scaling(data)) {
 		if (sio_data->internal & BIT(0))
 			data->in_scaled |= BIT(3);	/* in3 is AVCC */
 		if (sio_data->internal & BIT(1))
-- 
2.39.2

[PATCH 6.1 103/224] scsi: qla2xxx: Synchronize the IOCB count to be in order

[Greg Kroah-Hartman]

From: Quinn Tran <qutran@marvell.com>

commit d3affdeb400f3adc925bd996f3839481f5291839 upstream.

A system hang was observed with the following call trace:

BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 15 PID: 86747 Comm: nvme Kdump: loaded Not tainted 6.2.0+ #1
Hardware name: Dell Inc. PowerEdge R6515/04F3CJ, BIOS 2.7.3 03/31/2022
RIP: 0010:__wake_up_common+0x55/0x190
Code: 41 f6 01 04 0f 85 b2 00 00 00 48 8b 43 08 4c 8d
      40 e8 48 8d 43 08 48 89 04 24 48 89 c6\
      49 8d 40 18 48 39 c6 0f 84 e9 00 00 00 <49> 8b 40 18 89 6c 24 14 31
      ed 4c 8d 60 e8 41 8b 18 f6 c3 04 75 5d
RSP: 0018:ffffb05a82afbba0 EFLAGS: 00010082
RAX: 0000000000000000 RBX: ffff8f9b83a00018 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8f9b83a00020 RDI: ffff8f9b83a00018
RBP: 0000000000000001 R08: ffffffffffffffe8 R09: ffffb05a82afbbf8
R10: 70735f7472617473 R11: 5f30307832616c71 R12: 0000000000000001
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f815cf4c740(0000) GS:ffff8f9eeed80000(0000)
	knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010633a000 CR4: 0000000000350ee0
Call Trace:
    <TASK>
    __wake_up_common_lock+0x83/0xd0
    qla_nvme_ls_req+0x21b/0x2b0 [qla2xxx]
    __nvme_fc_send_ls_req+0x1b5/0x350 [nvme_fc]
    nvme_fc_xmt_disconnect_assoc+0xca/0x110 [nvme_fc]
    nvme_fc_delete_association+0x1bf/0x220 [nvme_fc]
    ? nvme_remove_namespaces+0x9f/0x140 [nvme_core]
    nvme_do_delete_ctrl+0x5b/0xa0 [nvme_core]
    nvme_sysfs_delete+0x5f/0x70 [nvme_core]
    kernfs_fop_write_iter+0x12b/0x1c0
    vfs_write+0x2a3/0x3b0
    ksys_write+0x5f/0xe0
    do_syscall_64+0x5c/0x90
    ? syscall_exit_work+0x103/0x130
    ? syscall_exit_to_user_mode+0x12/0x30
    ? do_syscall_64+0x69/0x90
    ? exit_to_user_mode_loop+0xd0/0x130
    ? exit_to_user_mode_prepare+0xec/0x100
    ? syscall_exit_to_user_mode+0x12/0x30
    ? do_syscall_64+0x69/0x90
    ? syscall_exit_to_user_mode+0x12/0x30
    ? do_syscall_64+0x69/0x90
    entry_SYSCALL_64_after_hwframe+0x72/0xdc
    RIP: 0033:0x7f815cd3eb97

The IOCB counts are out of order and that would block any commands from
going out and subsequently hang the system. Synchronize the IOCB count to
be in correct order.

Fixes: 5f63a163ed2f ("scsi: qla2xxx: Fix exchange oversubscription for management commands")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230313043711.13500-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: Lin Li <lilin@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/qla2xxx/qla_isr.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1900,6 +1900,8 @@ qla2x00_get_sp_from_handle(scsi_qla_host
 	}
 
 	req->outstanding_cmds[index] = NULL;
+
+	qla_put_fw_resources(sp->qpair, &sp->iores);
 	return sp;
 }
 
@@ -3112,7 +3114,6 @@ qla25xx_process_bidir_status_iocb(scsi_q
 	}
 	bsg_reply->reply_payload_rcv_len = 0;
 
-	qla_put_fw_resources(sp->qpair, &sp->iores);
 done:
 	/* Return the vendor specific reply to API */
 	bsg_reply->reply_data.vendor_reply.vendor_rsp[0] = rval;

[PATCH 6.1 104/224] scsi: qla2xxx: Perform lockless command completion in abort path

[Greg Kroah-Hartman]

From: Nilesh Javali <njavali@marvell.com>

commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9 upstream.

While adding and removing the controller, the following call trace was
observed:

WARNING: CPU: 3 PID: 623596 at kernel/dma/mapping.c:532 dma_free_attrs+0x33/0x50
CPU: 3 PID: 623596 Comm: sh Kdump: loaded Not tainted 5.14.0-96.el9.x86_64 #1
RIP: 0010:dma_free_attrs+0x33/0x50

Call Trace:
   qla2x00_async_sns_sp_done+0x107/0x1b0 [qla2xxx]
   qla2x00_abort_srb+0x8e/0x250 [qla2xxx]
   ? ql_dbg+0x70/0x100 [qla2xxx]
   __qla2x00_abort_all_cmds+0x108/0x190 [qla2xxx]
   qla2x00_abort_all_cmds+0x24/0x70 [qla2xxx]
   qla2x00_abort_isp_cleanup+0x305/0x3e0 [qla2xxx]
   qla2x00_remove_one+0x364/0x400 [qla2xxx]
   pci_device_remove+0x36/0xa0
   __device_release_driver+0x17a/0x230
   device_release_driver+0x24/0x30
   pci_stop_bus_device+0x68/0x90
   pci_stop_and_remove_bus_device_locked+0x16/0x30
   remove_store+0x75/0x90
   kernfs_fop_write_iter+0x11c/0x1b0
   new_sync_write+0x11f/0x1b0
   vfs_write+0x1eb/0x280
   ksys_write+0x5f/0xe0
   do_syscall_64+0x5c/0x80
   ? do_user_addr_fault+0x1d8/0x680
   ? do_syscall_64+0x69/0x80
   ? exc_page_fault+0x62/0x140
   ? asm_exc_page_fault+0x8/0x30
   entry_SYSCALL_64_after_hwframe+0x44/0xae

The command was completed in the abort path during driver unload with a
lock held, causing the warning in abort path. Hence complete the command
without any lock held.

Reported-by: Lin Li <lilin@redhat.com>
Tested-by: Lin Li <lilin@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230313043711.13500-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/qla2xxx/qla_os.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1848,6 +1848,17 @@ __qla2x00_abort_all_cmds(struct qla_qpai
 	for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
 		sp = req->outstanding_cmds[cnt];
 		if (sp) {
+			/*
+			 * perform lockless completion during driver unload
+			 */
+			if (qla2x00_chip_is_down(vha)) {
+				req->outstanding_cmds[cnt] = NULL;
+				spin_unlock_irqrestore(qp->qp_lock_ptr, flags);
+				sp->done(sp, res);
+				spin_lock_irqsave(qp->qp_lock_ptr, flags);
+				continue;
+			}
+
 			switch (sp->cmd_type) {
 			case TYPE_SRB:
 				qla2x00_abort_srb(qp, sp, res, &flags);

[PATCH 6.1 105/224] smb3: lower default deferred close timeout to address perf regression

[Greg Kroah-Hartman]

From: Steve French <stfrench@microsoft.com>

commit 7e0e76d99079be13c9961dde7c93b2d1ee665af4 upstream.

Performance tests with large number of threads noted that the change
of the default closetimeo (deferred close timeout between when
close is done by application and when client has to send the close
to the server), to 5 seconds from 1 second, significantly degraded
perf in some cases like this (in the filebench example reported,
the stats show close requests on the wire taking twice as long,
and 50% regression in filebench perf). This is stil configurable
via mount parm closetimeo, but to be safe, decrease default back
to its previous value of 1 second.

Reported-by: Yin Fengwei <fengwei.yin@intel.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/lkml/997614df-10d4-af53-9571-edec36b0e2f3@intel.com/
Fixes: 5efdd9122eff ("smb3: allow deferred close timeout to be configurable")
Cc: stable@vger.kernel.org # 6.0+
Tested-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/fs_context.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/fs_context.h b/fs/cifs/fs_context.h
index 1b8d4e27f831..3de00e7127ec 100644
--- a/fs/cifs/fs_context.h
+++ b/fs/cifs/fs_context.h
@@ -286,5 +286,5 @@ extern void smb3_update_mnt_flags(struct cifs_sb_info *cifs_sb);
  * max deferred close timeout (jiffies) - 2^30
  */
 #define SMB3_MAX_DCLOSETIMEO (1 << 30)
-#define SMB3_DEF_DCLOSETIMEO (5 * HZ) /* Can increase later, other clients use larger */
+#define SMB3_DEF_DCLOSETIMEO (1 * HZ) /* even 1 sec enough to help eg open/write/close/open/read */
 #endif
-- 
2.40.0

[PATCH 6.1 106/224] smb3: fix unusable share after force unmount failure

[Greg Kroah-Hartman]

From: Steve French <stfrench@microsoft.com>

commit 491eafce1a51c457701351a4bf40733799745314 upstream.

If user does forced unmount ("umount -f") while files are still open
on the share (as was seen in a Kubernetes example running on SMB3.1.1
mount) then we were marking the share as "TID_EXITING" in umount_begin()
which caused all subsequent operations (except write) to fail ... but
unfortunately when umount_begin() is called we do not know yet that
there are open files or active references on the share that would prevent
unmount from succeeding.  Kubernetes had example when they were doing
umount -f when files were open which caused the share to become
unusable until the files were closed (and the umount retried).

Fix this so that TID_EXITING is not set until we are about to send
the tree disconnect (not at the beginning of forced umounts in
umount_begin) so that if "umount -f" fails (due to open files or
references) the mount is still usable.

Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/cifsfs.c  |    9 ++++++---
 fs/cifs/cifssmb.c |    6 ++----
 fs/cifs/connect.c |    1 +
 fs/cifs/smb2pdu.c |    8 ++------
 4 files changed, 11 insertions(+), 13 deletions(-)

--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -730,13 +730,16 @@ static void cifs_umount_begin(struct sup
 	spin_lock(&tcon->tc_lock);
 	if ((tcon->tc_count > 1) || (tcon->status == TID_EXITING)) {
 		/* we have other mounts to same share or we have
-		   already tried to force umount this and woken up
+		   already tried to umount this and woken up
 		   all waiting network requests, nothing to do */
 		spin_unlock(&tcon->tc_lock);
 		spin_unlock(&cifs_tcp_ses_lock);
 		return;
-	} else if (tcon->tc_count == 1)
-		tcon->status = TID_EXITING;
+	}
+	/*
+	 * can not set tcon->status to TID_EXITING yet since we don't know if umount -f will
+	 * fail later (e.g. due to open files).  TID_EXITING will be set just before tdis req sent
+	 */
 	spin_unlock(&tcon->tc_lock);
 	spin_unlock(&cifs_tcp_ses_lock);
 
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -85,13 +85,11 @@ cifs_reconnect_tcon(struct cifs_tcon *tc
 
 	/*
 	 * only tree disconnect, open, and write, (and ulogoff which does not
-	 * have tcon) are allowed as we start force umount
+	 * have tcon) are allowed as we start umount
 	 */
 	spin_lock(&tcon->tc_lock);
 	if (tcon->status == TID_EXITING) {
-		if (smb_command != SMB_COM_WRITE_ANDX &&
-		    smb_command != SMB_COM_OPEN_ANDX &&
-		    smb_command != SMB_COM_TREE_DISCONNECT) {
+		if (smb_command != SMB_COM_TREE_DISCONNECT) {
 			spin_unlock(&tcon->tc_lock);
 			cifs_dbg(FYI, "can not send cmd %d while umounting\n",
 				 smb_command);
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2365,6 +2365,7 @@ cifs_put_tcon(struct cifs_tcon *tcon)
 	WARN_ON(tcon->tc_count < 0);
 
 	list_del_init(&tcon->tcon_list);
+	tcon->status = TID_EXITING;
 	spin_unlock(&tcon->tc_lock);
 	spin_unlock(&cifs_tcp_ses_lock);
 
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -225,13 +225,9 @@ smb2_reconnect(__le16 smb2_command, stru
 	spin_lock(&tcon->tc_lock);
 	if (tcon->status == TID_EXITING) {
 		/*
-		 * only tree disconnect, open, and write,
-		 * (and ulogoff which does not have tcon)
-		 * are allowed as we start force umount.
+		 * only tree disconnect allowed when disconnecting ...
 		 */
-		if ((smb2_command != SMB2_WRITE) &&
-		   (smb2_command != SMB2_CREATE) &&
-		   (smb2_command != SMB2_TREE_DISCONNECT)) {
+		if (smb2_command != SMB2_TREE_DISCONNECT) {
 			spin_unlock(&tcon->tc_lock);
 			cifs_dbg(FYI, "can not send cmd %d while umounting\n",
 				 smb2_command);

[PATCH 6.1 107/224] uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2

[Greg Kroah-Hartman]

From: Yaroslav Furman <yaro330@gmail.com>

commit a37eb61b6ec064ac794b8a1e89fd33eb582fe51d upstream.

Just like other JMicron JMS5xx enclosures, it chokes on report-opcodes,
let's avoid them.

Signed-off-by: Yaroslav Furman <yaro330@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230312090745.47962-1-yaro330@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_uas.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -111,6 +111,13 @@ UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x99
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BROKEN_FUA),
 
+/* Reported by: Yaroslav Furman <yaro330@gmail.com> */
+UNUSUAL_DEV(0x152d, 0x0583, 0x0000, 0x9999,
+		"JMicron",
+		"JMS583Gen 2",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES),
+
 /* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */
 UNUSUAL_DEV(0x154b, 0xf00b, 0x0000, 0x9999,
 		"PNY",

[PATCH 6.1 108/224] thunderbolt: Use scale field when allocating USB3 bandwidth

[Greg Kroah-Hartman]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit c82510b1d87bdebfe916048857d2ef46f1778aa5 upstream.

When tunneling aggregated USB3 (20 Gb/s) the bandwidth values that are
programmed to the ADP_USB3_CS_2 go higher than 4096 and that does not
fit anymore to the 12-bit field. Fix this by scaling the value using
the scale field accordingly.

Fixes: 3b1d8d577ca8 ("thunderbolt: Implement USB3 bandwidth negotiation routines")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thunderbolt/usb4.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -2050,18 +2050,30 @@ static int usb4_usb3_port_write_allocate
 						    int downstream_bw)
 {
 	u32 val, ubw, dbw, scale;
-	int ret;
+	int ret, max_bw;
 
-	/* Read the used scale, hardware default is 0 */
-	ret = tb_port_read(port, &scale, TB_CFG_PORT,
-			   port->cap_adap + ADP_USB3_CS_3, 1);
+	/* Figure out suitable scale */
+	scale = 0;
+	max_bw = max(upstream_bw, downstream_bw);
+	while (scale < 64) {
+		if (mbps_to_usb3_bw(max_bw, scale) < 4096)
+			break;
+		scale++;
+	}
+
+	if (WARN_ON(scale >= 64))
+		return -EINVAL;
+
+	ret = tb_port_write(port, &scale, TB_CFG_PORT,
+			    port->cap_adap + ADP_USB3_CS_3, 1);
 	if (ret)
 		return ret;
 
-	scale &= ADP_USB3_CS_3_SCALE_MASK;
 	ubw = mbps_to_usb3_bw(upstream_bw, scale);
 	dbw = mbps_to_usb3_bw(downstream_bw, scale);
 
+	tb_port_dbg(port, "scaled bandwidth %u/%u, scale %u\n", ubw, dbw, scale);
+
 	ret = tb_port_read(port, &val, TB_CFG_PORT,
 			   port->cap_adap + ADP_USB3_CS_2, 1);
 	if (ret)

[PATCH 6.1 109/224] thunderbolt: Call tb_check_quirks() after initializing adapters

[Greg Kroah-Hartman]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit d2d6ddf188f609861489d5d188d545856a3ed399 upstream.

In order to apply quirks based on certain adapter types move call to
tb_check_quirks() happen after the adapters are initialized. This should
not affect the existing quirks.

Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thunderbolt/switch.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -2959,8 +2959,6 @@ int tb_switch_add(struct tb_switch *sw)
 			dev_warn(&sw->dev, "reading DROM failed: %d\n", ret);
 		tb_sw_dbg(sw, "uid: %#llx\n", sw->uid);
 
-		tb_check_quirks(sw);
-
 		ret = tb_switch_set_uuid(sw);
 		if (ret) {
 			dev_err(&sw->dev, "failed to set UUID\n");
@@ -2979,6 +2977,8 @@ int tb_switch_add(struct tb_switch *sw)
 			}
 		}
 
+		tb_check_quirks(sw);
+
 		tb_switch_default_link_ports(sw);
 
 		ret = tb_switch_update_link_attributes(sw);

[PATCH 6.1 110/224] thunderbolt: Add quirk to disable CLx

[Greg Kroah-Hartman]

From: Sanjay R Mehta <sanju.mehta@amd.com>

commit 7af9da8ce8f9a16221ecd8ba4280582f5bd452fc upstream.

Add QUIRK_NO_CLX to disable the CLx state for hardware which
doesn't supports it.

AMD Yellow Carp and Pink Sardine don't support CLx state,
hence disabling it using QUIRK_NO_CLX.

Cc: stable@vger.kernel.org
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
[mw: added debug log when the quirk is run]
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thunderbolt/quirks.c |   13 +++++++++++++
 drivers/thunderbolt/tb.h     |   11 ++++++++---
 2 files changed, 21 insertions(+), 3 deletions(-)

--- a/drivers/thunderbolt/quirks.c
+++ b/drivers/thunderbolt/quirks.c
@@ -20,6 +20,12 @@ static void quirk_dp_credit_allocation(s
 	}
 }
 
+static void quirk_clx_disable(struct tb_switch *sw)
+{
+	sw->quirks |= QUIRK_NO_CLX;
+	tb_sw_dbg(sw, "disabling CL states\n");
+}
+
 struct tb_quirk {
 	u16 hw_vendor_id;
 	u16 hw_device_id;
@@ -37,6 +43,13 @@ static const struct tb_quirk tb_quirks[]
 	 * DP buffers.
 	 */
 	{ 0x8087, 0x0b26, 0x0000, 0x0000, quirk_dp_credit_allocation },
+	/*
+	 * CLx is not supported on AMD USB4 Yellow Carp and Pink Sardine platforms.
+	 */
+	{ 0x0438, 0x0208, 0x0000, 0x0000, quirk_clx_disable },
+	{ 0x0438, 0x0209, 0x0000, 0x0000, quirk_clx_disable },
+	{ 0x0438, 0x020a, 0x0000, 0x0000, quirk_clx_disable },
+	{ 0x0438, 0x020b, 0x0000, 0x0000, quirk_clx_disable },
 };
 
 /**
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -23,6 +23,11 @@
 #define NVM_MAX_SIZE		SZ_512K
 #define NVM_DATA_DWORDS		16
 
+/* Keep link controller awake during update */
+#define QUIRK_FORCE_POWER_LINK_CONTROLLER		BIT(0)
+/* Disable CLx if not supported */
+#define QUIRK_NO_CLX					BIT(1)
+
 /**
  * struct tb_nvm - Structure holding NVM information
  * @dev: Owner of the NVM
@@ -997,6 +1002,9 @@ static inline bool tb_switch_is_clx_enab
  */
 static inline bool tb_switch_is_clx_supported(const struct tb_switch *sw)
 {
+	if (sw->quirks & QUIRK_NO_CLX)
+		return false;
+
 	return tb_switch_is_usb4(sw) || tb_switch_is_titan_ridge(sw);
 }
 
@@ -1254,9 +1262,6 @@ struct usb4_port *usb4_port_device_add(s
 void usb4_port_device_remove(struct usb4_port *usb4);
 int usb4_port_device_resume(struct usb4_port *usb4);
 
-/* Keep link controller awake during update */
-#define QUIRK_FORCE_POWER_LINK_CONTROLLER		BIT(0)
-
 void tb_check_quirks(struct tb_switch *sw);
 
 #ifdef CONFIG_ACPI

[PATCH 6.1 111/224] thunderbolt: Fix memory leak in margining

[Greg Kroah-Hartman]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit acec726473822bc6b585961f4ca2a11fa7f28341 upstream.

Memory for the usb4->margining needs to be relased for the upstream port
of the router as well, even though the debugfs directory gets released
with the router device removal. Fix this.

Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thunderbolt/debugfs.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/thunderbolt/debugfs.c b/drivers/thunderbolt/debugfs.c
index 4339e706cc3a..f92ad71ef983 100644
--- a/drivers/thunderbolt/debugfs.c
+++ b/drivers/thunderbolt/debugfs.c
@@ -942,7 +942,8 @@ static void margining_port_remove(struct tb_port *port)
 
 	snprintf(dir_name, sizeof(dir_name), "port%d", port->port);
 	parent = debugfs_lookup(dir_name, port->sw->debugfs_dir);
-	debugfs_remove_recursive(debugfs_lookup("margining", parent));
+	if (parent)
+		debugfs_remove_recursive(debugfs_lookup("margining", parent));
 
 	kfree(port->usb4->margining);
 	port->usb4->margining = NULL;
@@ -967,19 +968,18 @@ static void margining_switch_init(struct tb_switch *sw)
 
 static void margining_switch_remove(struct tb_switch *sw)
 {
+	struct tb_port *upstream, *downstream;
 	struct tb_switch *parent_sw;
-	struct tb_port *downstream;
 	u64 route = tb_route(sw);
 
 	if (!route)
 		return;
 
-	/*
-	 * Upstream is removed with the router itself but we need to
-	 * remove the downstream port margining directory.
-	 */
+	upstream = tb_upstream_port(sw);
 	parent_sw = tb_switch_parent(sw);
 	downstream = tb_port_at(route, parent_sw);
+
+	margining_port_remove(upstream);
 	margining_port_remove(downstream);
 }
 
-- 
2.40.0

[PATCH 6.1 112/224] thunderbolt: Disable interrupt auto clear for rings

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

commit 468c49f44759720a312e52d44a71c3949ed63d7c upstream.

When interrupt auto clear is programmed, any read to the interrupt
status register will clear all interrupts.  If two interrupts have
come in before one can be serviced then this will cause lost interrupts.

On AMD USB4 routers this has manifested in odd problems particularly
with long strings of control tranfers such as reading the DROM via bit
banging.

Instead of clearing interrupts automatically, clear the bit corresponding
to the given ring's interrupt in the ISR.

Fixes: 7a1808f82a37 ("thunderbolt: Handle ring interrupt by reading interrupt status register")
Cc: Sanju Mehta <Sanju.Mehta@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thunderbolt/nhi.c      |   40 +++++++++++++++++++++++++---------------
 drivers/thunderbolt/nhi_regs.h |    6 ++++--
 2 files changed, 29 insertions(+), 17 deletions(-)

--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -71,24 +71,31 @@ static void ring_interrupt_active(struct
 		u32 step, shift, ivr, misc;
 		void __iomem *ivr_base;
 		int index;
+		int bit;
 
 		if (ring->is_tx)
 			index = ring->hop;
 		else
 			index = ring->hop + ring->nhi->hop_count;
 
-		if (ring->nhi->quirks & QUIRK_AUTO_CLEAR_INT) {
-			/*
-			 * Ask the hardware to clear interrupt status
-			 * bits automatically since we already know
-			 * which interrupt was triggered.
-			 */
-			misc = ioread32(ring->nhi->iobase + REG_DMA_MISC);
-			if (!(misc & REG_DMA_MISC_INT_AUTO_CLEAR)) {
-				misc |= REG_DMA_MISC_INT_AUTO_CLEAR;
-				iowrite32(misc, ring->nhi->iobase + REG_DMA_MISC);
-			}
-		}
+		/*
+		 * Intel routers support a bit that isn't part of
+		 * the USB4 spec to ask the hardware to clear
+		 * interrupt status bits automatically since
+		 * we already know which interrupt was triggered.
+		 *
+		 * Other routers explicitly disable auto-clear
+		 * to prevent conditions that may occur where two
+		 * MSIX interrupts are simultaneously active and
+		 * reading the register clears both of them.
+		 */
+		misc = ioread32(ring->nhi->iobase + REG_DMA_MISC);
+		if (ring->nhi->quirks & QUIRK_AUTO_CLEAR_INT)
+			bit = REG_DMA_MISC_INT_AUTO_CLEAR;
+		else
+			bit = REG_DMA_MISC_DISABLE_AUTO_CLEAR;
+		if (!(misc & bit))
+			iowrite32(misc | bit, ring->nhi->iobase + REG_DMA_MISC);
 
 		ivr_base = ring->nhi->iobase + REG_INT_VEC_ALLOC_BASE;
 		step = index / REG_INT_VEC_ALLOC_REGS * REG_INT_VEC_ALLOC_BITS;
@@ -393,14 +400,17 @@ EXPORT_SYMBOL_GPL(tb_ring_poll_complete)
 
 static void ring_clear_msix(const struct tb_ring *ring)
 {
+	int bit;
+
 	if (ring->nhi->quirks & QUIRK_AUTO_CLEAR_INT)
 		return;
 
+	bit = ring_interrupt_index(ring) & 31;
 	if (ring->is_tx)
-		ioread32(ring->nhi->iobase + REG_RING_NOTIFY_BASE);
+		iowrite32(BIT(bit), ring->nhi->iobase + REG_RING_INT_CLEAR);
 	else
-		ioread32(ring->nhi->iobase + REG_RING_NOTIFY_BASE +
-			 4 * (ring->nhi->hop_count / 32));
+		iowrite32(BIT(bit), ring->nhi->iobase + REG_RING_INT_CLEAR +
+			  4 * (ring->nhi->hop_count / 32));
 }
 
 static irqreturn_t ring_msix(int irq, void *data)
--- a/drivers/thunderbolt/nhi_regs.h
+++ b/drivers/thunderbolt/nhi_regs.h
@@ -77,12 +77,13 @@ struct ring_desc {
 
 /*
  * three bitfields: tx, rx, rx overflow
- * Every bitfield contains one bit for every hop (REG_HOP_COUNT). Registers are
- * cleared on read. New interrupts are fired only after ALL registers have been
+ * Every bitfield contains one bit for every hop (REG_HOP_COUNT).
+ * New interrupts are fired only after ALL registers have been
  * read (even those containing only disabled rings).
  */
 #define REG_RING_NOTIFY_BASE	0x37800
 #define RING_NOTIFY_REG_COUNT(nhi) ((31 + 3 * nhi->hop_count) / 32)
+#define REG_RING_INT_CLEAR	0x37808
 
 /*
  * two bitfields: rx, tx
@@ -105,6 +106,7 @@ struct ring_desc {
 
 #define REG_DMA_MISC			0x39864
 #define REG_DMA_MISC_INT_AUTO_CLEAR     BIT(2)
+#define REG_DMA_MISC_DISABLE_AUTO_CLEAR	BIT(17)
 
 #define REG_INMAIL_DATA			0x39900
 

[PATCH 6.1 113/224] thunderbolt: Add missing UNSET_INBOUND_SBTX for retimer access

[Greg Kroah-Hartman]

From: Gil Fine <gil.fine@linux.intel.com>

commit cd0c1e582b055dea615001b8bd8eccaf6f69f7ce upstream.

According to USB4 retimer specification, the process of firmware update
sequence requires issuing a SET_INBOUND_SBTX port operation that later
shall be followed by UNSET_INBOUND_SBTX port operation. This last step
is not currently issued by the driver but it is necessary to make sure
the retimers are put back to passthrough mode even during enumeration.

If this step is missing the link may not come up properly after
soft-reboot for example.

For this reason issue UNSET_INBOUND_SBTX after SET_INBOUND_SBTX for
enumeration and also when the NVM upgrade is run.

Reported-by: Christian Schaubschläger <christian.schaubschlaeger@gmx.at>
Link: https://lore.kernel.org/linux-usb/b556f5ed-5ee8-9990-9910-afd60db93310@gmx.at/
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thunderbolt/retimer.c |   23 +++++++++++++++++++++--
 drivers/thunderbolt/sb_regs.h |    1 +
 drivers/thunderbolt/tb.h      |    1 +
 drivers/thunderbolt/usb4.c    |   14 ++++++++++++++
 4 files changed, 37 insertions(+), 2 deletions(-)

--- a/drivers/thunderbolt/retimer.c
+++ b/drivers/thunderbolt/retimer.c
@@ -187,6 +187,22 @@ static ssize_t nvm_authenticate_show(str
 	return ret;
 }
 
+static void tb_retimer_set_inbound_sbtx(struct tb_port *port)
+{
+	int i;
+
+	for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++)
+		usb4_port_retimer_set_inbound_sbtx(port, i);
+}
+
+static void tb_retimer_unset_inbound_sbtx(struct tb_port *port)
+{
+	int i;
+
+	for (i = TB_MAX_RETIMER_INDEX; i >= 1; i--)
+		usb4_port_retimer_unset_inbound_sbtx(port, i);
+}
+
 static ssize_t nvm_authenticate_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t count)
 {
@@ -213,6 +229,7 @@ static ssize_t nvm_authenticate_store(st
 	rt->auth_status = 0;
 
 	if (val) {
+		tb_retimer_set_inbound_sbtx(rt->port);
 		if (val == AUTHENTICATE_ONLY) {
 			ret = tb_retimer_nvm_authenticate(rt, true);
 		} else {
@@ -232,6 +249,7 @@ static ssize_t nvm_authenticate_store(st
 	}
 
 exit_unlock:
+	tb_retimer_unset_inbound_sbtx(rt->port);
 	mutex_unlock(&rt->tb->lock);
 exit_rpm:
 	pm_runtime_mark_last_busy(&rt->dev);
@@ -440,8 +458,7 @@ int tb_retimer_scan(struct tb_port *port
 	 * Enable sideband channel for each retimer. We can do this
 	 * regardless whether there is device connected or not.
 	 */
-	for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++)
-		usb4_port_retimer_set_inbound_sbtx(port, i);
+	tb_retimer_set_inbound_sbtx(port);
 
 	/*
 	 * Before doing anything else, read the authentication status.
@@ -464,6 +481,8 @@ int tb_retimer_scan(struct tb_port *port
 			break;
 	}
 
+	tb_retimer_unset_inbound_sbtx(port);
+
 	if (!last_idx)
 		return 0;
 
--- a/drivers/thunderbolt/sb_regs.h
+++ b/drivers/thunderbolt/sb_regs.h
@@ -20,6 +20,7 @@ enum usb4_sb_opcode {
 	USB4_SB_OPCODE_ROUTER_OFFLINE = 0x4e45534c,		/* "LSEN" */
 	USB4_SB_OPCODE_ENUMERATE_RETIMERS = 0x4d554e45,		/* "ENUM" */
 	USB4_SB_OPCODE_SET_INBOUND_SBTX = 0x5055534c,		/* "LSUP" */
+	USB4_SB_OPCODE_UNSET_INBOUND_SBTX = 0x50555355,		/* "USUP" */
 	USB4_SB_OPCODE_QUERY_LAST_RETIMER = 0x5453414c,		/* "LAST" */
 	USB4_SB_OPCODE_GET_NVM_SECTOR_SIZE = 0x53534e47,	/* "GNSS" */
 	USB4_SB_OPCODE_NVM_SET_OFFSET = 0x53504f42,		/* "BOPS" */
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -1220,6 +1220,7 @@ int usb4_port_sw_margin(struct tb_port *
 int usb4_port_sw_margin_errors(struct tb_port *port, u32 *errors);
 
 int usb4_port_retimer_set_inbound_sbtx(struct tb_port *port, u8 index);
+int usb4_port_retimer_unset_inbound_sbtx(struct tb_port *port, u8 index);
 int usb4_port_retimer_read(struct tb_port *port, u8 index, u8 reg, void *buf,
 			   u8 size);
 int usb4_port_retimer_write(struct tb_port *port, u8 index, u8 reg,
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -1562,6 +1562,20 @@ int usb4_port_retimer_set_inbound_sbtx(s
 }
 
 /**
+ * usb4_port_retimer_unset_inbound_sbtx() - Disable sideband channel transactions
+ * @port: USB4 port
+ * @index: Retimer index
+ *
+ * Disables sideband channel transations on SBTX. The reverse of
+ * usb4_port_retimer_set_inbound_sbtx().
+ */
+int usb4_port_retimer_unset_inbound_sbtx(struct tb_port *port, u8 index)
+{
+	return usb4_port_retimer_op(port, index,
+				    USB4_SB_OPCODE_UNSET_INBOUND_SBTX, 500);
+}
+
+/**
  * usb4_port_retimer_read() - Read from retimer sideband registers
  * @port: USB4 port
  * @index: Retimer index

[PATCH 6.1 114/224] thunderbolt: Use const qualifier for `ring_interrupt_index`

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

commit 1716efdb07938bd6510e1127d02012799112c433 upstream.

`ring_interrupt_index` doesn't change the data for `ring` so mark it as
const. This is needed by the following patch that disables interrupt
auto clear for rings.

Cc: Sanju Mehta <Sanju.Mehta@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thunderbolt/nhi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -46,7 +46,7 @@
 #define QUIRK_AUTO_CLEAR_INT	BIT(0)
 #define QUIRK_E2E		BIT(1)
 
-static int ring_interrupt_index(struct tb_ring *ring)
+static int ring_interrupt_index(const struct tb_ring *ring)
 {
 	int bit = ring->hop;
 	if (!ring->is_tx)

[PATCH 6.1 115/224] thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bit

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

commit 58cdfe6f58b35f17f56386f5fcf937168a423ad1 upstream.

cppcheck reports
drivers/thunderbolt/nhi.c:74:7: style: Local variable 'bit' shadows outer variable [shadowVariable]
  int bit;
      ^
drivers/thunderbolt/nhi.c:66:6: note: Shadowed declaration
 int bit = ring_interrupt_index(ring) & 31;
     ^
drivers/thunderbolt/nhi.c:74:7: note: Shadow variable
  int bit;
      ^
For readablity rename the outer to interrupt_bit and the innner
to auto_clear_bit.

Fixes: 468c49f44759 ("thunderbolt: Disable interrupt auto clear for ring")
Cc: stable@vger.kernel.org
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/thunderbolt/nhi.c |   17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -63,15 +63,15 @@ static void ring_interrupt_active(struct
 {
 	int reg = REG_RING_INTERRUPT_BASE +
 		  ring_interrupt_index(ring) / 32 * 4;
-	int bit = ring_interrupt_index(ring) & 31;
-	int mask = 1 << bit;
+	int interrupt_bit = ring_interrupt_index(ring) & 31;
+	int mask = 1 << interrupt_bit;
 	u32 old, new;
 
 	if (ring->irq > 0) {
 		u32 step, shift, ivr, misc;
 		void __iomem *ivr_base;
+		int auto_clear_bit;
 		int index;
-		int bit;
 
 		if (ring->is_tx)
 			index = ring->hop;
@@ -91,11 +91,12 @@ static void ring_interrupt_active(struct
 		 */
 		misc = ioread32(ring->nhi->iobase + REG_DMA_MISC);
 		if (ring->nhi->quirks & QUIRK_AUTO_CLEAR_INT)
-			bit = REG_DMA_MISC_INT_AUTO_CLEAR;
+			auto_clear_bit = REG_DMA_MISC_INT_AUTO_CLEAR;
 		else
-			bit = REG_DMA_MISC_DISABLE_AUTO_CLEAR;
-		if (!(misc & bit))
-			iowrite32(misc | bit, ring->nhi->iobase + REG_DMA_MISC);
+			auto_clear_bit = REG_DMA_MISC_DISABLE_AUTO_CLEAR;
+		if (!(misc & auto_clear_bit))
+			iowrite32(misc | auto_clear_bit,
+				  ring->nhi->iobase + REG_DMA_MISC);
 
 		ivr_base = ring->nhi->iobase + REG_INT_VEC_ALLOC_BASE;
 		step = index / REG_INT_VEC_ALLOC_REGS * REG_INT_VEC_ALLOC_BITS;
@@ -115,7 +116,7 @@ static void ring_interrupt_active(struct
 
 	dev_dbg(&ring->nhi->pdev->dev,
 		"%s interrupt at register %#x bit %d (%#x -> %#x)\n",
-		active ? "enabling" : "disabling", reg, bit, old, new);
+		active ? "enabling" : "disabling", reg, interrupt_bit, old, new);
 
 	if (new == old)
 		dev_WARN(&ring->nhi->pdev->dev,

[PATCH 6.1 116/224] ASoC: amd: yp: Add OMEN by HP Gaming Laptop 16z-n000 to quirks

[Greg Kroah-Hartman]

From: Joseph Hunkeler <jhunkeler@gmail.com>

[ Upstream commit 22ce6843abec19270bf69b176d7ee0a4ef781da5 ]

Enables display microphone on the HP OMEN 16z-n000 (8A42) laptop

Signed-off-by: Joseph Hunkeler <jhunkeler@gmail.com>
Link: https://lore.kernel.org/r/20230216155007.26143-1-jhunkeler@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index 36314753923b8..4e681e9c08fe5 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -255,6 +255,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "15NBC1011"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OMEN by HP Gaming Laptop 16z-n000"),
+		}
+	},
 	{}
 };
 
-- 
2.39.2

[PATCH 6.1 117/224] scsi: ufs: core: Initialize devfreq synchronously

[Greg Kroah-Hartman]

From: Adrien Thierry <athierry@redhat.com>

[ Upstream commit 7dafc3e007918384c8693ff8d70381b5c1e9c247 ]

During UFS initialization, devfreq initialization is asynchronous:
ufshcd_async_scan() calls ufshcd_add_lus(), which in turn initializes
devfreq for UFS. The simple ondemand governor is then loaded. If it is
built as a module, request_module() is called and throws a warning:

  WARNING: CPU: 7 PID: 167 at kernel/kmod.c:136 __request_module+0x1e0/0x460
  Modules linked in: crct10dif_ce llcc_qcom phy_qcom_qmp_usb ufs_qcom phy_qcom_snps_femto_v2 ufshcd_pltfrm phy_qcom_qmp_combo ufshcd_core phy_qcom_qmp_ufs qcom_wdt socinfo fuse ipv6
  CPU: 7 PID: 167 Comm: kworker/u16:3 Not tainted 6.2.0-rc6-00009-g58706f7fb045 #1
  Hardware name: Qualcomm SA8540P Ride (DT)
  Workqueue: events_unbound async_run_entry_fn
  pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : __request_module+0x1e0/0x460
  lr : __request_module+0x1d8/0x460
  sp : ffff800009323b90
  x29: ffff800009323b90 x28: 0000000000000000 x27: 0000000000000000
  x26: ffff800009323d50 x25: ffff7b9045f57810 x24: ffff7b9045f57830
  x23: ffffdc5a83e426e8 x22: ffffdc5ae80a9818 x21: 0000000000000001
  x20: ffffdc5ae7502f98 x19: ffff7b9045f57800 x18: ffffffffffffffff
  x17: 312f716572667665 x16: 642f7366752e3030 x15: 0000000000000000
  x14: 000000000000021c x13: 0000000000005400 x12: ffff7b9042ed7614
  x11: ffff7b9042ed7600 x10: 00000000636c0890 x9 : 0000000000000038
  x8 : ffff7b9045f2c880 x7 : ffff7b9045f57c68 x6 : 0000000000000080
  x5 : 0000000000000000 x4 : 8000000000000000 x3 : 0000000000000000
  x2 : 0000000000000000 x1 : ffffdc5ae5d382f0 x0 : 0000000000000001
  Call trace:
   __request_module+0x1e0/0x460
   try_then_request_governor+0x7c/0x100
   devfreq_add_device+0x4b0/0x5fc
   ufshcd_async_scan+0x1d4/0x310 [ufshcd_core]
   async_run_entry_fn+0x34/0xe0
   process_one_work+0x1d0/0x320
   worker_thread+0x14c/0x444
   kthread+0x10c/0x110
   ret_from_fork+0x10/0x20

This occurs because synchronous module loading from async is not
allowed. According to __request_module():

  /*
   * We don't allow synchronous module loading from async.  Module
   * init may invoke async_synchronize_full() which will end up
   * waiting for this task which already is waiting for the module
   * loading to complete, leading to a deadlock.
   */

Such a deadlock was experienced on the Qualcomm QDrive3/sa8540p-ride. With
DEVFREQ_GOV_SIMPLE_ONDEMAND=m, the boot hangs after the warning.

Fix both the warning and the deadlock by moving devfreq initialization out
of the async routine.

Tested on the sa8540p-ride by using fio to put the UFS under load, and
printing the trace generated by
/sys/kernel/tracing/events/ufs/ufshcd_clk_scaling events. The trace looks
similar with and without the change.

Link: https://lore.kernel.org/r/20230217194423.42553-1-athierry@redhat.com
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/core/ufshcd.c | 47 ++++++++++++++++++++++++++-------------
 include/ufs/ufshcd.h      |  1 +
 2 files changed, 32 insertions(+), 16 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index edd34dac91b1d..e652624c449a9 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -1354,6 +1354,13 @@ static int ufshcd_devfreq_target(struct device *dev,
 	struct ufs_clk_info *clki;
 	unsigned long irq_flags;
 
+	/*
+	 * Skip devfreq if UFS initialization is not finished.
+	 * Otherwise ufs could be in a inconsistent state.
+	 */
+	if (!smp_load_acquire(&hba->logical_unit_scan_finished))
+		return 0;
+
 	if (!ufshcd_is_clkscaling_supported(hba))
 		return -EINVAL;
 
@@ -8184,22 +8191,6 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
 	if (ret)
 		goto out;
 
-	/* Initialize devfreq after UFS device is detected */
-	if (ufshcd_is_clkscaling_supported(hba)) {
-		memcpy(&hba->clk_scaling.saved_pwr_info.info,
-			&hba->pwr_info,
-			sizeof(struct ufs_pa_layer_attr));
-		hba->clk_scaling.saved_pwr_info.is_valid = true;
-		hba->clk_scaling.is_allowed = true;
-
-		ret = ufshcd_devfreq_init(hba);
-		if (ret)
-			goto out;
-
-		hba->clk_scaling.is_enabled = true;
-		ufshcd_init_clk_scaling_sysfs(hba);
-	}
-
 	ufs_bsg_probe(hba);
 	ufshpb_init(hba);
 	scsi_scan_host(hba->host);
@@ -8338,6 +8329,12 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
 	if (ret) {
 		pm_runtime_put_sync(hba->dev);
 		ufshcd_hba_exit(hba);
+	} else {
+		/*
+		 * Make sure that when reader code sees UFS initialization has finished,
+		 * all initialization steps have really been executed.
+		 */
+		smp_store_release(&hba->logical_unit_scan_finished, true);
 	}
 }
 
@@ -9892,12 +9889,30 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	 */
 	ufshcd_set_ufs_dev_active(hba);
 
+	/* Initialize devfreq */
+	if (ufshcd_is_clkscaling_supported(hba)) {
+		memcpy(&hba->clk_scaling.saved_pwr_info.info,
+			&hba->pwr_info,
+			sizeof(struct ufs_pa_layer_attr));
+		hba->clk_scaling.saved_pwr_info.is_valid = true;
+		hba->clk_scaling.is_allowed = true;
+
+		err = ufshcd_devfreq_init(hba);
+		if (err)
+			goto rpm_put_sync;
+
+		hba->clk_scaling.is_enabled = true;
+		ufshcd_init_clk_scaling_sysfs(hba);
+	}
+
 	async_schedule(ufshcd_async_scan, hba);
 	ufs_sysfs_add_nodes(hba->dev);
 
 	device_enable_async_suspend(dev);
 	return 0;
 
+rpm_put_sync:
+	pm_runtime_put_sync(dev);
 free_tmf_queue:
 	blk_mq_destroy_queue(hba->tmf_queue);
 free_tmf_tag_set:
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index b54f22840dabf..0ef1ec6a3b4d1 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -894,6 +894,7 @@ struct ufs_hba {
 	struct completion *uic_async_done;
 
 	enum ufshcd_state ufshcd_state;
+	bool logical_unit_scan_finished;
 	u32 eh_flags;
 	u32 intr_mask;
 	u16 ee_ctrl_mask;
-- 
2.39.2

[PATCH 6.1 118/224] ASoC: amd: yc: Add DMI entries to support HP OMEN 16-n0xxx (8A43)

[Greg Kroah-Hartman]

From: Duc Anh Le <lub.the.studio@gmail.com>

[ Upstream commit d52279d5c9204a041e9ba02a66a353573b2f96e4 ]

This model requires an additional detection quirk to enable the internal microphone.

Signed-off-by: Duc Anh Le <lub.the.studio@gmail.com>
Link: https://lore.kernel.org/r/20230227234921.7784-1-lub.the.studio@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/amd/yc/acp6x-mach.c b/sound/soc/amd/yc/acp6x-mach.c
index 4e681e9c08fe5..4a69ce702360c 100644
--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -262,6 +262,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "OMEN by HP Gaming Laptop 16z-n000"),
 		}
 	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "HP"),
+			DMI_MATCH(DMI_BOARD_NAME, "8A43"),
+		}
+	},
 	{}
 };
 
-- 
2.39.2

[PATCH 6.1 119/224] ACPI: x86: Drop quirk for HP Elitebook

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit e32d546c483a2a0f607687f5b521c2a2f942ffbe ]

There was a quirk in `acpi/x86/s2idle.c` for an HP Elitebook G9
platforms to force AMD GUID codepath instead of Microsoft codepath.

This was due to a bug with WCN6855 WLAN firmware interaction with
the system.

This bug is fixed by WCN6855 firmware:
WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Remove the quirk as it's no longer necessary with this firmware.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=c7a57ef688f7d99d8338a5d8edddc8836ff0e6de
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/x86/s2idle.c | 24 ------------------------
 1 file changed, 24 deletions(-)

diff --git a/drivers/acpi/x86/s2idle.c b/drivers/acpi/x86/s2idle.c
index c7afce465a071..e499c60c45791 100644
--- a/drivers/acpi/x86/s2idle.c
+++ b/drivers/acpi/x86/s2idle.c
@@ -384,29 +384,6 @@ static const struct acpi_device_id amd_hid_ids[] = {
 	{}
 };
 
-static int lps0_prefer_amd(const struct dmi_system_id *id)
-{
-	pr_debug("Using AMD GUID w/ _REV 2.\n");
-	rev_id = 2;
-	return 0;
-}
-static const struct dmi_system_id s2idle_dmi_table[] __initconst = {
-	{
-		/*
-		 * AMD Rembrandt based HP EliteBook 835/845/865 G9
-		 * Contains specialized AML in AMD/_REV 2 path to avoid
-		 * triggering a bug in Qualcomm WLAN firmware. This may be
-		 * removed in the future if that firmware is fixed.
-		 */
-		.callback = lps0_prefer_amd,
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "HP"),
-			DMI_MATCH(DMI_BOARD_NAME, "8990"),
-		},
-	},
-	{}
-};
-
 static int lps0_device_attach(struct acpi_device *adev,
 			      const struct acpi_device_id *not_used)
 {
@@ -586,7 +563,6 @@ static const struct platform_s2idle_ops acpi_s2idle_ops_lps0 = {
 
 void __init acpi_s2idle_setup(void)
 {
-	dmi_check_system(s2idle_dmi_table);
 	acpi_scan_add_handler(&lps0_handler);
 	s2idle_set_ops(&acpi_s2idle_ops_lps0);
 }
-- 
2.39.2

[PATCH 6.1 120/224] ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit e2a56364485e7789e7b8f342637c7f3a219f7ede ]

commit 018d6711c26e4 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.

It was reported that several more Dell systems suffered the same symptoms.
As the list is continuing to grow but these are all Cezanne systems,
instead add Cezanne to the CPU list to apply the StorageD3Enable property
and remove the whole list.

It was also reported that an HP system only has StorageD3Enable on the ACPI
device for the first NVME disk, not the second.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217003
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216773
Reported-by: David Alvarez Lombardi <dqalombardi@proton.me>
Reported-by: dbilios@stdio.gr
Reported-and-tested-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Tested-by: victor.bonnelle@proton.me
Tested-by: hurricanepootis@protonmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/x86/utils.c | 37 +++++++++++++------------------------
 1 file changed, 13 insertions(+), 24 deletions(-)

diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index 4e816bb402f68..e45285d4e62a4 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -200,39 +200,28 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s
  * a hardcoded allowlist for D3 support, which was used for these platforms.
  *
  * This allows quirking on Linux in a similar fashion.
+ *
+ * Cezanne systems shouldn't *normally* need this as the BIOS includes
+ * StorageD3Enable.  But for two reasons we have added it.
+ * 1) The BIOS on a number of Dell systems have ambiguity
+ *    between the same value used for _ADR on ACPI nodes GPP1.DEV0 and GPP1.NVME.
+ *    GPP1.NVME is needed to get StorageD3Enable node set properly.
+ *    https://bugzilla.kernel.org/show_bug.cgi?id=216440
+ *    https://bugzilla.kernel.org/show_bug.cgi?id=216773
+ *    https://bugzilla.kernel.org/show_bug.cgi?id=217003
+ * 2) On at least one HP system StorageD3Enable is missing on the second NVME
+      disk in the system.
  */
 static const struct x86_cpu_id storage_d3_cpu_ids[] = {
 	X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 96, NULL),	/* Renoir */
 	X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 104, NULL),	/* Lucienne */
-	{}
-};
-
-static const struct dmi_system_id force_storage_d3_dmi[] = {
-	{
-		/*
-		 * _ADR is ambiguous between GPP1.DEV0 and GPP1.NVME
-		 * but .NVME is needed to get StorageD3Enable node
-		 * https://bugzilla.kernel.org/show_bug.cgi?id=216440
-		 */
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 14 7425 2-in-1"),
-		}
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 16 5625"),
-		}
-	},
+	X86_MATCH_VENDOR_FAM_MODEL(AMD, 25, 80, NULL),	/* Cezanne */
 	{}
 };
 
 bool force_storage_d3(void)
 {
-	const struct dmi_system_id *dmi_id = dmi_first_match(force_storage_d3_dmi);
-
-	return dmi_id || x86_match_cpu(storage_d3_cpu_ids);
+	return x86_match_cpu(storage_d3_cpu_ids);
 }
 
 /*
-- 
2.39.2

[PATCH 6.1 121/224] riscv: Bump COMMAND_LINE_SIZE value to 1024

[Greg Kroah-Hartman]

From: Alexandre Ghiti <alex@ghiti.fr>

[ Upstream commit 61fc1ee8be26bc192d691932b0a67eabee45d12f ]

Increase COMMAND_LINE_SIZE as the current default value is too low
for syzbot kernel command line.

There has been considerable discussion on this patch that has led to a
larger patch set removing COMMAND_LINE_SIZE from the uapi headers on all
ports.  That's not quite done yet, but it's gotten far enough we're
confident this is not a uABI change so this is safe.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Link: https://lore.kernel.org/r/20210316193420.904-1-alex@ghiti.fr
[Palmer: it's not uabi]
Link: https://lore.kernel.org/linux-riscv/874b8076-b0d1-4aaa-bcd8-05d523060152@app.fastmail.com/#t
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/include/uapi/asm/setup.h | 8 ++++++++
 1 file changed, 8 insertions(+)
 create mode 100644 arch/riscv/include/uapi/asm/setup.h

diff --git a/arch/riscv/include/uapi/asm/setup.h b/arch/riscv/include/uapi/asm/setup.h
new file mode 100644
index 0000000000000..66b13a5228808
--- /dev/null
+++ b/arch/riscv/include/uapi/asm/setup.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
+
+#ifndef _UAPI_ASM_RISCV_SETUP_H
+#define _UAPI_ASM_RISCV_SETUP_H
+
+#define COMMAND_LINE_SIZE	1024
+
+#endif /* _UAPI_ASM_RISCV_SETUP_H */
-- 
2.39.2

[PATCH 6.1 122/224] drm/cirrus: NULL-check pipe->plane.state->fb in cirrus_pipe_update()

[Greg Kroah-Hartman]

From: Alexandr Sapozhnikov <alsp705@gmail.com>

[ Upstream commit 7245e629dcaaf308f1868aeffa218e9849c77893 ]

After having been compared to NULL value at cirrus.c:455, pointer
'pipe->plane.state->fb' is passed as 1st parameter in call to function
'cirrus_fb_blit_rect' at cirrus.c:461, where it is dereferenced at
cirrus.c:316.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

v2:
	* aligned commit message to line-length limits

Signed-off-by: Alexandr Sapozhnikov <alsp705@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215171549.16305-1-alsp705@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tiny/cirrus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
index 354d5e854a6f0..b27e469e90217 100644
--- a/drivers/gpu/drm/tiny/cirrus.c
+++ b/drivers/gpu/drm/tiny/cirrus.c
@@ -455,7 +455,7 @@ static void cirrus_pipe_update(struct drm_simple_display_pipe *pipe,
 	if (state->fb && cirrus->cpp != cirrus_cpp(state->fb))
 		cirrus_mode_set(cirrus, &crtc->mode, state->fb);
 
-	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
+	if (state->fb && drm_atomic_helper_damage_merged(old_state, state, &rect))
 		cirrus_fb_blit_rect(state->fb, &shadow_plane_state->data[0], &rect);
 }
 
-- 
2.39.2

[PATCH 6.1 123/224] HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded

[Greg Kroah-Hartman]

From: Danny Kaehn <kaehndan@gmail.com>

[ Upstream commit 37f5b858a66543b2b67c0288280af623985abc29 ]

The CP2112 generates interrupts from a polling routine on a thread,
and can only support threaded interrupts. This patch configures the
gpiochip irq chip with this flag, disallowing consumers to request
a hard IRQ from this driver, which resulted in a segfault previously.

Signed-off-by: Danny Kaehn <kaehndan@gmail.com>
Link: https://lore.kernel.org/r/20230210170044.11835-1-kaehndan@gmail.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-cp2112.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index 1e16b0fa310d1..27cadadda7c9d 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -1354,6 +1354,7 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	girq->parents = NULL;
 	girq->default_type = IRQ_TYPE_NONE;
 	girq->handler = handle_simple_irq;
+	girq->threaded = true;
 
 	ret = gpiochip_add_data(&dev->gc, dev);
 	if (ret < 0) {
-- 
2.39.2

[PATCH 6.1 124/224] ca8210: fix mac_len negative array access

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 6c993779ea1d0cccdb3a5d7d45446dd229e610a3 ]

This patch fixes a buffer overflow access of skb->data if
ieee802154_hdr_peek_addrs() fails.

Reported-by: lianhui tang <bluetlh@gmail.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230217042504.3303396-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ieee802154/ca8210.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
index e1a569b99e4a6..0b0c6c0764fe9 100644
--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -1913,6 +1913,8 @@ static int ca8210_skb_tx(
 	 * packet
 	 */
 	mac_len = ieee802154_hdr_peek_addrs(skb, &header);
+	if (mac_len < 0)
+		return mac_len;
 
 	secspec.security_level = header.sec.level;
 	secspec.key_id_mode = header.sec.key_id_mode;
-- 
2.39.2

[PATCH 6.1 125/224] HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse

[Greg Kroah-Hartman]

From: Rafał Szalecki <perexist7@gmail.com>

[ Upstream commit db50f7a3983f0154e730f1147ef729e0c5c2f90c ]

Add signature for the Logitech MX Master 3S mouse over Bluetooth.

Signed-off-by: Rafał Szalecki <perexist7@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-hidpp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index fdb66dc065822..e906ee375298a 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4378,6 +4378,8 @@ static const struct hid_device_id hidpp_devices[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb01e) },
 	{ /* MX Master 3 mouse over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb023) },
+	{ /* MX Master 3S mouse over Bluetooth */
+	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb034) },
 	{}
 };
 
-- 
2.39.2

[PATCH 6.1 126/224] HID: intel-ish-hid: ipc: Fix potential use-after-free in work function

[Greg Kroah-Hartman]

From: Reka Norman <rekanorman@chromium.org>

[ Upstream commit 8ae2f2b0a28416ed2f6d8478ac8b9f7862f36785 ]

When a reset notify IPC message is received, the ISR schedules a work
function and passes the ISHTP device to it via a global pointer
ishtp_dev. If ish_probe() fails, the devm-managed device resources
including ishtp_dev are freed, but the work is not cancelled, causing a
use-after-free when the work function tries to access ishtp_dev. Use
devm_work_autocancel() instead, so that the work is automatically
cancelled if probe fails.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/intel-ish-hid/ipc/ipc.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
index 15e14239af829..a49c6affd7c4c 100644
--- a/drivers/hid/intel-ish-hid/ipc/ipc.c
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2014-2016, Intel Corporation.
  */
 
+#include <linux/devm-helpers.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/delay.h>
@@ -621,7 +622,6 @@ static void	recv_ipc(struct ishtp_device *dev, uint32_t doorbell_val)
 	case MNG_RESET_NOTIFY:
 		if (!ishtp_dev) {
 			ishtp_dev = dev;
-			INIT_WORK(&fw_reset_work, fw_reset_work_fn);
 		}
 		schedule_work(&fw_reset_work);
 		break;
@@ -940,6 +940,7 @@ struct ishtp_device *ish_dev_init(struct pci_dev *pdev)
 {
 	struct ishtp_device *dev;
 	int	i;
+	int	ret;
 
 	dev = devm_kzalloc(&pdev->dev,
 			   sizeof(struct ishtp_device) + sizeof(struct ish_hw),
@@ -975,6 +976,12 @@ struct ishtp_device *ish_dev_init(struct pci_dev *pdev)
 		list_add_tail(&tx_buf->link, &dev->wr_free_list);
 	}
 
+	ret = devm_work_autocancel(&pdev->dev, &fw_reset_work, fw_reset_work_fn);
+	if (ret) {
+		dev_err(dev->devc, "Failed to initialise FW reset work\n");
+		return NULL;
+	}
+
 	dev->ops = &ish_hw_ops;
 	dev->devc = &pdev->dev;
 	dev->mtu = IPC_PAYLOAD_SIZE - sizeof(struct ishtp_msg_hdr);
-- 
2.39.2

[PATCH 6.1 127/224] m68k: mm: Fix systems with memory at end of 32-bit address space

[Greg Kroah-Hartman]

From: Kars de Jong <jongk@linux-m68k.org>

[ Upstream commit 0d9fad91abfd723ea5070a46d98a9f4496c93ba9 ]

The calculation of end addresses of memory chunks overflowed to 0 when
a memory chunk is located at the end of 32-bit address space.
This is the case for the HP300 architecture.

Link: https://lore.kernel.org/linux-m68k/CACz-3rhUo5pgNwdWHaPWmz+30Qo9xCg70wNxdf7o5x-6tXq8QQ@mail.gmail.com/
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230223112349.26675-1-jongk@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/mm/motorola.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 2a375637e0077..9113012240789 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -437,7 +437,7 @@ void __init paging_init(void)
 	}
 
 	min_addr = m68k_memory[0].addr;
-	max_addr = min_addr + m68k_memory[0].size;
+	max_addr = min_addr + m68k_memory[0].size - 1;
 	memblock_add_node(m68k_memory[0].addr, m68k_memory[0].size, 0,
 			  MEMBLOCK_NONE);
 	for (i = 1; i < m68k_num_memory;) {
@@ -452,21 +452,21 @@ void __init paging_init(void)
 		}
 		memblock_add_node(m68k_memory[i].addr, m68k_memory[i].size, i,
 				  MEMBLOCK_NONE);
-		addr = m68k_memory[i].addr + m68k_memory[i].size;
+		addr = m68k_memory[i].addr + m68k_memory[i].size - 1;
 		if (addr > max_addr)
 			max_addr = addr;
 		i++;
 	}
 	m68k_memoffset = min_addr - PAGE_OFFSET;
-	m68k_virt_to_node_shift = fls(max_addr - min_addr - 1) - 6;
+	m68k_virt_to_node_shift = fls(max_addr - min_addr) - 6;
 
 	module_fixup(NULL, __start_fixup, __stop_fixup);
 	flush_icache();
 
-	high_memory = phys_to_virt(max_addr);
+	high_memory = phys_to_virt(max_addr) + 1;
 
 	min_low_pfn = availmem >> PAGE_SHIFT;
-	max_pfn = max_low_pfn = max_addr >> PAGE_SHIFT;
+	max_pfn = max_low_pfn = (max_addr >> PAGE_SHIFT) + 1;
 
 	/* Reserve kernel text/data/bss and the memory allocated in head.S */
 	memblock_reserve(m68k_memory[0].addr, availmem - m68k_memory[0].addr);
-- 
2.39.2

[PATCH 6.1 128/224] m68k: Only force 030 bus error if PC not in exception table

[Greg Kroah-Hartman]

From: Michael Schmitz <schmitzmic@gmail.com>

[ Upstream commit e36a82bebbf7da814530d5a179bef9df5934b717 ]

__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.

Our 030 bus error handler is ill equipped to deal with this:

Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.

In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.

Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.

I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.

Tested on 030 Atari Falcon.

Reported-by: Eero Tamminen <oak@helsinkinet.fi>
Link: https://lore.kernel.org/r/alpine.LNX.2.21.1904091023540.25@nippy.intranet
Link: https://lore.kernel.org/r/63130691-1984-c423-c1f2-73bfd8d3dcd3@gmail.com
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230301021107.26307-1-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/kernel/traps.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index 5c8cba0efc63e..a700807c9b6d9 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/init.h>
 #include <linux/ptrace.h>
 #include <linux/kallsyms.h>
+#include <linux/extable.h>
 
 #include <asm/setup.h>
 #include <asm/fpu.h>
@@ -545,7 +546,8 @@ static inline void bus_error030 (struct frame *fp)
 			errorcode |= 2;
 
 		if (mmusr & (MMU_I | MMU_WP)) {
-			if (ssw & 4) {
+			/* We might have an exception table for this PC */
+			if (ssw & 4 && !search_exception_tables(fp->ptregs.pc)) {
 				pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n",
 				       ssw & RW ? "read" : "write",
 				       fp->un.fmtb.daddr,
-- 
2.39.2

[PATCH 6.1 129/224] selftests/bpf: check that modifier resolves after pointer

[Greg Kroah-Hartman]

From: Lorenz Bauer <lorenz.bauer@isovalent.com>

[ Upstream commit dfdd608c3b365f0fd49d7e13911ebcde06b9865b ]

Add a regression test that ensures that a VAR pointing at a
modifier which follows a PTR (or STRUCT or ARRAY) is resolved
correctly by the datasec validator.

Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230306112138.155352-3-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/btf.c | 28 ++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/tools/testing/selftests/bpf/prog_tests/btf.c b/tools/testing/selftests/bpf/prog_tests/btf.c
index 24dd6214394e0..d711f4bea98ea 100644
--- a/tools/testing/selftests/bpf/prog_tests/btf.c
+++ b/tools/testing/selftests/bpf/prog_tests/btf.c
@@ -879,6 +879,34 @@ static struct btf_raw_test raw_tests[] = {
 	.btf_load_err = true,
 	.err_str = "Invalid elem",
 },
+{
+	.descr = "var after datasec, ptr followed by modifier",
+	.raw_types = {
+		/* .bss section */				/* [1] */
+		BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 2),
+			sizeof(void*)+4),
+		BTF_VAR_SECINFO_ENC(4, 0, sizeof(void*)),
+		BTF_VAR_SECINFO_ENC(6, sizeof(void*), 4),
+		/* int */					/* [2] */
+		BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),
+		/* int* */					/* [3] */
+		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 2),
+		BTF_VAR_ENC(NAME_TBD, 3, 0),			/* [4] */
+		/* const int */					/* [5] */
+		BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_CONST, 0, 0), 2),
+		BTF_VAR_ENC(NAME_TBD, 5, 0),			/* [6] */
+		BTF_END_RAW,
+	},
+	.str_sec = "\0a\0b\0c\0",
+	.str_sec_size = sizeof("\0a\0b\0c\0"),
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = ".bss",
+	.key_size = sizeof(int),
+	.value_size = sizeof(void*)+4,
+	.key_type_id = 0,
+	.value_type_id = 1,
+	.max_entries = 1,
+},
 /* Test member exceeds the size of struct.
  *
  * struct A {
-- 
2.39.2

[PATCH 6.1 130/224] scsi: target: iscsi: Fix an error message in iscsi_check_key()

[Greg Kroah-Hartman]

From: Maurizio Lombardi <mlombard@redhat.com>

[ Upstream commit 6cc55c969b7ce8d85e09a636693d4126c3676c11 ]

The first half of the error message is printed by pr_err(), the second half
is printed by pr_debug(). The user will therefore see only the first part
of the message and will miss some useful information.

Link: https://lore.kernel.org/r/20230214141556.762047-1-mlombard@redhat.com
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target_parameters.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index 2317fb077db0e..557516c642c3b 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -1262,18 +1262,20 @@ static struct iscsi_param *iscsi_check_key(
 		return param;
 
 	if (!(param->phase & phase)) {
-		pr_err("Key \"%s\" may not be negotiated during ",
-				param->name);
+		char *phase_name;
+
 		switch (phase) {
 		case PHASE_SECURITY:
-			pr_debug("Security phase.\n");
+			phase_name = "Security";
 			break;
 		case PHASE_OPERATIONAL:
-			pr_debug("Operational phase.\n");
+			phase_name = "Operational";
 			break;
 		default:
-			pr_debug("Unknown phase.\n");
+			phase_name = "Unknown";
 		}
+		pr_err("Key \"%s\" may not be negotiated during %s phase.\n",
+				param->name, phase_name);
 		return NULL;
 	}
 
-- 
2.39.2

[PATCH 6.1 131/224] scsi: qla2xxx: Add option to disable FC2 Target support

[Greg Kroah-Hartman]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 877b03795fcf29ff2e2351f7e574ecc9b9c51732 ]

Commit 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target") added
support for FC2 Targets. Unfortunately, there are older setups which break
with this new feature enabled.

Allow to disable it via module option.

Link: https://lore.kernel.org/r/20230208152014.109214-1-dwagner@suse.de
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_gbl.h  |  1 +
 drivers/scsi/qla2xxx/qla_init.c |  3 ++-
 drivers/scsi/qla2xxx/qla_os.c   | 10 +++++++++-
 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index e3256e721be14..ee54207fc5319 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -192,6 +192,7 @@ extern int ql2xsecenable;
 extern int ql2xenforce_iocb_limit;
 extern int ql2xabts_wait_nvme;
 extern u32 ql2xnvme_queues;
+extern int ql2xfc2target;
 
 extern int qla2x00_loop_reset(scsi_qla_host_t *);
 extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index a8d822c4e3bac..93f7f3dd5d82b 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1841,7 +1841,8 @@ void qla2x00_handle_rscn(scsi_qla_host_t *vha, struct event_arg *ea)
 	case RSCN_PORT_ADDR:
 		fcport = qla2x00_find_fcport_by_nportid(vha, &ea->id, 1);
 		if (fcport) {
-			if (fcport->flags & FCF_FCP2_DEVICE &&
+			if (ql2xfc2target &&
+			    fcport->flags & FCF_FCP2_DEVICE &&
 			    atomic_read(&fcport->state) == FCS_ONLINE) {
 				ql_dbg(ql_dbg_disc, vha, 0x2115,
 				       "Delaying session delete for FCP2 portid=%06x %8phC ",
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e010812015b14..7d2d872bae3c5 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -360,6 +360,13 @@ MODULE_PARM_DESC(ql2xnvme_queues,
 	"1 - Minimum number of queues supported\n"
 	"8 - Default value");
 
+int ql2xfc2target = 1;
+module_param(ql2xfc2target, int, 0444);
+MODULE_PARM_DESC(qla2xfc2target,
+		  "Enables FC2 Target support. "
+		  "0 - FC2 Target support is disabled. "
+		  "1 - FC2 Target support is enabled (default).");
+
 static struct scsi_transport_template *qla2xxx_transport_template = NULL;
 struct scsi_transport_template *qla2xxx_transport_vport_template = NULL;
 
@@ -4087,7 +4094,8 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *vha)
 	    "Mark all dev lost\n");
 
 	list_for_each_entry(fcport, &vha->vp_fcports, list) {
-		if (fcport->loop_id != FC_NO_LOOP_ID &&
+		if (ql2xfc2target &&
+		    fcport->loop_id != FC_NO_LOOP_ID &&
 		    (fcport->flags & FCF_FCP2_DEVICE) &&
 		    fcport->port_type == FCT_TARGET &&
 		    !qla2x00_reset_active(vha)) {
-- 
2.39.2

[PATCH 6.1 132/224] scsi: hisi_sas: Check devm_add_action() return value

[Greg Kroah-Hartman]

From: Kang Chen <void0red@gmail.com>

[ Upstream commit 06d1a90de60208054cca15ef200138cfdbb642a9 ]

In case devm_add_action() fails, check it in the caller of
interrupt_preinit_v3_hw().

Link: https://lore.kernel.org/r/20230227031030.893324-1-void0red@gmail.com
Signed-off-by: Kang Chen <void0red@gmail.com>
Acked-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index d56b4bfd27678..620dcefe7b6f4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2448,8 +2448,7 @@ static int interrupt_preinit_v3_hw(struct hisi_hba *hisi_hba)
 	hisi_hba->cq_nvecs = vectors - BASE_VECTORS_V3_HW;
 	shost->nr_hw_queues = hisi_hba->cq_nvecs;
 
-	devm_add_action(&pdev->dev, hisi_sas_v3_free_vectors, pdev);
-	return 0;
+	return devm_add_action(&pdev->dev, hisi_sas_v3_free_vectors, pdev);
 }
 
 static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
-- 
2.39.2

[PATCH 6.1 133/224] scsi: ufs: core: Add soft dependency on governor_simpleondemand

[Greg Kroah-Hartman]

From: Adrien Thierry <athierry@redhat.com>

[ Upstream commit 2ebe16155dc8bd4e602cad5b5f65458d2eaa1a75 ]

The ufshcd driver uses simpleondemand governor for devfreq. Add it to the
list of ufshcd softdeps to allow userspace initramfs tools like dracut to
automatically pull the governor module into the initramfs together with UFS
drivers.

Link: https://lore.kernel.org/r/20230220140740.14379-1-athierry@redhat.com
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/core/ufshcd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index e652624c449a9..82ecf776f9054 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -10089,4 +10089,5 @@ module_exit(ufshcd_core_exit);
 MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
 MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
 MODULE_DESCRIPTION("Generic UFS host controller driver Core");
+MODULE_SOFTDEP("pre: governor_simpleondemand");
 MODULE_LICENSE("GPL");
-- 
2.39.2

[PATCH 6.1 134/224] scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()

[Greg Kroah-Hartman]

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit 312320b0e0ec21249a17645683fe5304d796aec1 ]

If kzalloc() fails in lpfc_sli4_cgn_params_read(), then we rely on
lpfc_read_object()'s routine to NULL check pdata.

Currently, an early return error is thrown from lpfc_read_object() to
protect us from NULL ptr dereference, but the errno code is -ENODEV.

Change the errno code to a more appropriate -ENOMEM.

Reported-by: Kang Chen <void0red@gmail.com>
Link: https://lore.kernel.org/all/20230226102338.3362585-1-void0red@gmail.com
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230228044336.5195-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_init.c | 2 ++
 drivers/scsi/lpfc/lpfc_sli.c  | 4 ----
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index b535f1fd30100..2f38c8d5a48a9 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -7234,6 +7234,8 @@ lpfc_sli4_cgn_params_read(struct lpfc_hba *phba)
 	/* Find out if the FW has a new set of congestion parameters. */
 	len = sizeof(struct lpfc_cgn_param);
 	pdata = kzalloc(len, GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
 	ret = lpfc_read_object(phba, (char *)LPFC_PORT_CFG_NAME,
 			       pdata, len);
 
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index b93c948c4fcc4..43e06bb917e77 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -22096,10 +22096,6 @@ lpfc_read_object(struct lpfc_hba *phba, char *rdobject, uint32_t *datap,
 	struct lpfc_dmabuf *pcmd;
 	u32 rd_object_name[LPFC_MBX_OBJECT_NAME_LEN_DW] = {0};
 
-	/* sanity check on queue memory */
-	if (!datap)
-		return -ENODEV;
-
 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mbox)
 		return -ENOMEM;
-- 
2.39.2

[PATCH 6.1 135/224] scsi: lpfc: Avoid usage of list iterator variable after loop

[Greg Kroah-Hartman]

From: Jakob Koschel <jkl820.git@gmail.com>

[ Upstream commit 2850b23e9f9ae3696e472d2883ea1b43aafa884e ]

If the &epd_pool->list is empty when executing
lpfc_get_io_buf_from_expedite_pool() the function would return an invalid
pointer. Even in the case if the list is guaranteed to be populated, the
iterator variable should not be used after the loop to be more robust for
future changes.

Linus proposed to avoid any use of the list iterator variable after the
loop, in the attempt to move the list iterator variable declaration into
the macro to avoid any potential misuse after the loop [1].

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Link: https://lore.kernel.org/r/20230301-scsi-lpfc-avoid-list-iterator-after-loop-v1-1-325578ae7561@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_sli.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 43e06bb917e77..b44bb3ae22ad9 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -21886,20 +21886,20 @@ lpfc_get_io_buf_from_private_pool(struct lpfc_hba *phba,
 static struct lpfc_io_buf *
 lpfc_get_io_buf_from_expedite_pool(struct lpfc_hba *phba)
 {
-	struct lpfc_io_buf *lpfc_ncmd;
+	struct lpfc_io_buf *lpfc_ncmd = NULL, *iter;
 	struct lpfc_io_buf *lpfc_ncmd_next;
 	unsigned long iflag;
 	struct lpfc_epd_pool *epd_pool;
 
 	epd_pool = &phba->epd_pool;
-	lpfc_ncmd = NULL;
 
 	spin_lock_irqsave(&epd_pool->lock, iflag);
 	if (epd_pool->count > 0) {
-		list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
+		list_for_each_entry_safe(iter, lpfc_ncmd_next,
 					 &epd_pool->list, list) {
-			list_del(&lpfc_ncmd->list);
+			list_del(&iter->list);
 			epd_pool->count--;
+			lpfc_ncmd = iter;
 			break;
 		}
 	}
-- 
2.39.2

[PATCH 6.1 136/224] scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled

[Greg Kroah-Hartman]

From: Ranjan Kumar <ranjan.kumar@broadcom.com>

[ Upstream commit 5b06a7169c59ce0c77ef8b9c82aa07c478f82aac ]

Prevent driver from trying to dereference a NULL pointer in a debug print
while removing a device during driver unload.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230228140835.4075-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpi3mr/mpi3mr_transport.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c
index 50263ba4f8428..90f61a0a8f4ef 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_transport.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c
@@ -1549,7 +1549,8 @@ static void mpi3mr_sas_port_remove(struct mpi3mr_ioc *mrioc, u64 sas_address,
 
 	list_for_each_entry_safe(mr_sas_phy, next_phy,
 	    &mr_sas_port->phy_list, port_siblings) {
-		if ((mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO))
+		if ((!mrioc->stop_drv_processing) &&
+		    (mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO))
 			dev_info(&mr_sas_port->port->dev,
 			    "remove: sas_address(0x%016llx), phy(%d)\n",
 			    (unsigned long long)
-- 
2.39.2

[PATCH 6.1 137/224] scsi: mpi3mr: Wait for diagnostic save during controller init

[Greg Kroah-Hartman]

From: Ranjan Kumar <ranjan.kumar@broadcom.com>

[ Upstream commit 0a319f1629495d27879b7ebf6eee62b8cf6e4c37 ]

If a controller reset operation is triggered to recover the controller from
a fault state, then wait for the snapdump to be saved in the firmware
region before proceeding to reset the controller.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230228140835.4075-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpi3mr/mpi3mr_fw.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 74fa7f90399e3..ea9e69fb62826 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1198,7 +1198,7 @@ mpi3mr_revalidate_factsdata(struct mpi3mr_ioc *mrioc)
  */
 static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc)
 {
-	u32 ioc_config, ioc_status, timeout;
+	u32 ioc_config, ioc_status, timeout, host_diagnostic;
 	int retval = 0;
 	enum mpi3mr_iocstate ioc_state;
 	u64 base_info;
@@ -1252,6 +1252,23 @@ static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc)
 			    retval, mpi3mr_iocstate_name(ioc_state));
 	}
 	if (ioc_state != MRIOC_STATE_RESET) {
+		if (ioc_state == MRIOC_STATE_FAULT) {
+			timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10;
+			mpi3mr_print_fault_info(mrioc);
+			do {
+				host_diagnostic =
+					readl(&mrioc->sysif_regs->host_diagnostic);
+				if (!(host_diagnostic &
+				      MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS))
+					break;
+				if (!pci_device_is_present(mrioc->pdev)) {
+					mrioc->unrecoverable = 1;
+					ioc_err(mrioc, "controller is not present at the bringup\n");
+					goto out_device_not_present;
+				}
+				msleep(100);
+			} while (--timeout);
+		}
 		mpi3mr_print_fault_info(mrioc);
 		ioc_info(mrioc, "issuing soft reset to bring to reset state\n");
 		retval = mpi3mr_issue_reset(mrioc,
-- 
2.39.2

[PATCH 6.1 138/224] scsi: mpi3mr: NVMe command size greater than 8K fails

[Greg Kroah-Hartman]

From: Ranjan Kumar <ranjan.kumar@broadcom.com>

[ Upstream commit 4f297e856a7b5da2f2c66a12e739666e23943560 ]

A wrong variable is checked while populating PRP entries in the PRP page
and this results in failure. No PRP entries in the PRP page were
successfully created and any NVMe Encapsulated commands with PRP of size
greater than 8K failed.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230228140835.4075-6-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpi3mr/mpi3mr_app.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/mpi3mr/mpi3mr_app.c b/drivers/scsi/mpi3mr/mpi3mr_app.c
index bff6377023979..d10c6afb7f9cd 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_app.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_app.c
@@ -886,7 +886,7 @@ static int mpi3mr_build_nvme_prp(struct mpi3mr_ioc *mrioc,
 			 * each time through the loop.
 			 */
 			*prp_entry = cpu_to_le64(dma_addr);
-			if (*prp1_entry & sgemod_mask) {
+			if (*prp_entry & sgemod_mask) {
 				dprint_bsg_err(mrioc,
 				    "%s: PRP address collides with SGE modifier\n",
 				    __func__);
@@ -895,7 +895,7 @@ static int mpi3mr_build_nvme_prp(struct mpi3mr_ioc *mrioc,
 			*prp_entry &= ~sgemod_mask;
 			*prp_entry |= sgemod_val;
 			prp_entry++;
-			prp_entry_dma++;
+			prp_entry_dma += prp_size;
 		}
 
 		/*
-- 
2.39.2

[PATCH 6.1 139/224] scsi: mpi3mr: Bad drive in topology results kernel crash

[Greg Kroah-Hartman]

From: Ranjan Kumar <ranjan.kumar@broadcom.com>

[ Upstream commit 8e45183978d64699df639e795235433a60f35047 ]

When the SAS Transport Layer support is enabled and a device exposed to
the OS by the driver fails INQUIRY commands, the driver frees up the memory
allocated for an internal HBA port data structure. However, in some places,
the reference to the freed memory is not cleared. When the firmware sends
the Device Info change event for the same device again, the freed memory is
accessed and that leads to memory corruption and OS crash.

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20230228140835.4075-7-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpi3mr/mpi3mr_transport.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c
index 90f61a0a8f4ef..5748bd9369ff7 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_transport.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c
@@ -2355,15 +2355,16 @@ int mpi3mr_report_tgtdev_to_sas_transport(struct mpi3mr_ioc *mrioc,
 	tgtdev->host_exposed = 1;
 	if (!mpi3mr_sas_port_add(mrioc, tgtdev->dev_handle,
 	    sas_address_parent, hba_port)) {
-		tgtdev->host_exposed = 0;
 		retval = -1;
-	} else if ((!tgtdev->starget)) {
-		if (!mrioc->is_driver_loading)
+		} else if ((!tgtdev->starget) && (!mrioc->is_driver_loading)) {
 			mpi3mr_sas_port_remove(mrioc, sas_address,
 			    sas_address_parent, hba_port);
-		tgtdev->host_exposed = 0;
 		retval = -1;
 	}
+	if (retval) {
+		tgtdev->dev_spec.sas_sata_inf.hba_port = NULL;
+		tgtdev->host_exposed = 0;
+	}
 	return retval;
 }
 
@@ -2392,6 +2393,7 @@ void mpi3mr_remove_tgtdev_from_sas_transport(struct mpi3mr_ioc *mrioc,
 	mpi3mr_sas_port_remove(mrioc, sas_address, sas_address_parent,
 	    hba_port);
 	tgtdev->host_exposed = 0;
+	tgtdev->dev_spec.sas_sata_inf.hba_port = NULL;
 }
 
 /**
@@ -2448,7 +2450,7 @@ static u8 mpi3mr_get_port_id_by_rphy(struct mpi3mr_ioc *mrioc, struct sas_rphy *
 
 		tgtdev = __mpi3mr_get_tgtdev_by_addr_and_rphy(mrioc,
 			    rphy->identify.sas_address, rphy);
-		if (tgtdev) {
+		if (tgtdev && tgtdev->dev_spec.sas_sata_inf.hba_port) {
 			port_id =
 				tgtdev->dev_spec.sas_sata_inf.hba_port->port_id;
 			mpi3mr_tgtdev_put(tgtdev);
-- 
2.39.2

[PATCH 6.1 140/224] scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file

[Greg Kroah-Hartman]

From: Michael Kelley <mikelley@microsoft.com>

[ Upstream commit 11d9874c4204a785f43d899a1ab12f9dc8d9de3e ]

Hyper-V uses a VHD or VHDX file on the host as the underlying storage for a
virtual disk.  The VHD/VHDX file format is a sparse format where real disk
space on the host is assigned in chunks that the VHD/VHDX file format calls
the BlockSize.  This BlockSize is not to be confused with the 512-byte (or
4096-byte) sector size of the underlying storage device.  The default block
size for a new VHD/VHDX file is 32 Mbytes.  When a guest VM touches any
disk space within a 32 Mbyte chunk of the VHD/VHDX file, Hyper-V allocates
32 Mbytes of real disk space for that section of the VHD/VHDX. Similarly,
if a discard operation is done that covers an entire 32 Mbyte chunk,
Hyper-V will free the real disk space for that portion of the VHD/VHDX.
This BlockSize is surfaced in Linux as the "discard_granularity" in
/sys/block/sd<x>/queue, which makes sense.

Hyper-V also has differencing disks that can overlay a VHD/VHDX file to
capture changes to the VHD/VHDX while preserving the original VHD/VHDX.
One example of this differencing functionality is for VM snapshots.  When a
snapshot is created, a differencing disk is created.  If the snapshot is
rolled back, Hyper-V can just delete the differencing disk, and the VM will
see the original disk contents at the time the snapshot was taken.
Differencing disks are used in other scenarios as well.

The BlockSize for a differencing disk defaults to 2 Mbytes, not 32 Mbytes.
The smaller default is used because changes to differencing disks are
typically scattered all over, and Hyper-V doesn't want to allocate 32
Mbytes of real disk space for a stray write here or there.  The smaller
BlockSize provides more efficient use of real disk space.

When a differencing disk is added to a VHD/VHDX, Hyper-V reports
UNIT_ATTENTION with a sense code indicating "Operating parameters have
changed", because the value of discard_granularity should be changed to 2
Mbytes. When the differencing disk is removed, discard_granularity should
be changed back to 32 Mbytes.  However, current code simply reports a
message from scsi_report_sense() and the value of
/sys/block/sd<x>/queue/discard_granularity is not updated. The message
isn't very actionable by a sysadmin.

Fix this by having the storvsc driver check for the sense code indicating
that the underly VHD/VHDX block size has changed, and do a rescan of the
device to pick up the new discard_granularity.  With this change the entire
transition to/from differencing disks is handled automatically and
transparently, with no confusing messages being output.

Link: https://lore.kernel.org/r/1677516514-86060-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/storvsc_drv.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 55d6fb4526804..a0665bca54b99 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -987,6 +987,22 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb,
 				goto do_work;
 			}
 
+			/*
+			 * Check for "Operating parameters have changed"
+			 * due to Hyper-V changing the VHD/VHDX BlockSize
+			 * when adding/removing a differencing disk. This
+			 * causes discard_granularity to change, so do a
+			 * rescan to pick up the new granularity. We don't
+			 * want scsi_report_sense() to output a message
+			 * that a sysadmin wouldn't know what to do with.
+			 */
+			if ((asc == 0x3f) && (ascq != 0x03) &&
+					(ascq != 0x0e)) {
+				process_err_fn = storvsc_device_scan;
+				set_host_byte(scmnd, DID_REQUEUE);
+				goto do_work;
+			}
+
 			/*
 			 * Otherwise, let upper layer deal with the
 			 * error when sense message is present
-- 
2.39.2

[PATCH 6.1 141/224] platform/x86: int3472: Add GPIOs to Surface Go 3 Board data

[Greg Kroah-Hartman]

From: Daniel Scally <dan.scally@ideasonboard.com>

[ Upstream commit e8059d393158e927e36898aca89986a52025b9f3 ]

Add the INT347E GPIO lookup table to the board data for the Surface
Go 3. This is necessary to allow the ov7251 IR camera to probe
properly on that platform.

Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230302102611.314341-1-dan.scally@ideasonboard.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel/int3472/tps68470_board_data.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
index 309eab9c05588..322237e056f32 100644
--- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
+++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
@@ -159,9 +159,10 @@ static const struct int3472_tps68470_board_data surface_go_tps68470_board_data =
 static const struct int3472_tps68470_board_data surface_go3_tps68470_board_data = {
 	.dev_name = "i2c-INT3472:01",
 	.tps68470_regulator_pdata = &surface_go_tps68470_pdata,
-	.n_gpiod_lookups = 1,
+	.n_gpiod_lookups = 2,
 	.tps68470_gpio_lookup_tables = {
-		&surface_go_int347a_gpios
+		&surface_go_int347a_gpios,
+		&surface_go_int347e_gpios,
 	},
 };
 
-- 
2.39.2

[PATCH 6.1 142/224] net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990

[Greg Kroah-Hartman]

From: Enrico Sau <enrico.sau@gmail.com>

[ Upstream commit 418383e6ed6b4624a54ec05c535f13d184fbf33b ]

Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FE990
0x1081 composition in order to avoid bind error.

Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Link: https://lore.kernel.org/r/20230306115933.198259-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/cdc_mbim.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index c89639381eca3..cd4083e0b3b9e 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -665,6 +665,11 @@ static const struct usb_device_id mbim_devs[] = {
 	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
 	},
 
+	/* Telit FE990 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1081, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
 	/* default entry */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
 	  .driver_info = (unsigned long)&cdc_mbim_info_zlp,
-- 
2.39.2

[PATCH 6.1 143/224] net: usb: qmi_wwan: add Telit 0x1080 composition

[Greg Kroah-Hartman]

From: Enrico Sau <enrico.sau@gmail.com>

[ Upstream commit 382e363d5bed0cec5807b35761d14e55955eee63 ]

Add the following Telit FE990 composition:

0x1080: tty, adb, rmnet, tty, tty, tty, tty

Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Link: https://lore.kernel.org/r/20230306120528.198842-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 554d4e2a84a4e..2cc28af52ee25 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1363,6 +1363,7 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1057, 2)},	/* Telit FN980 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)},	/* Telit LN920 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1070, 2)},	/* Telit FN990 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1080, 2)}, /* Telit FE990 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)},	/* Telit ME910 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
-- 
2.39.2

[PATCH 6.1 144/224] drm/amd/display: Update clock table to include highest clock setting

[Greg Kroah-Hartman]

From: Swapnil Patel <Swapnil.Patel@amd.com>

[ Upstream commit 2d99a7ec25cf456cd3680eb314d6454138e5aa64 ]

[Why]
Currently, the clk manager matches SocVoltage with voltage from
fused settings (dfPstate clock table). And then corresponding clocks
are selected.

However in certain situations, this leads to clk manager not
including at least one entry with highest supported clock setting.

[How]
Update the clk manager to include at least one entry with highest
supported clock setting.

Reviewed-by: Pavle Kotarac <pavle.kotarac@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../display/dc/clk_mgr/dcn301/vg_clk_mgr.c    | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c
index 24715ca2fa944..01383aac6b419 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c
@@ -529,6 +529,19 @@ static struct clk_bw_params vg_bw_params = {
 
 };
 
+static uint32_t find_max_clk_value(const uint32_t clocks[], uint32_t num_clocks)
+{
+	uint32_t max = 0;
+	int i;
+
+	for (i = 0; i < num_clocks; ++i) {
+		if (clocks[i] > max)
+			max = clocks[i];
+	}
+
+	return max;
+}
+
 static unsigned int find_dcfclk_for_voltage(const struct vg_dpm_clocks *clock_table,
 		unsigned int voltage)
 {
@@ -572,12 +585,16 @@ static void vg_clk_mgr_helper_populate_bw_params(
 
 	bw_params->clk_table.num_entries = j + 1;
 
-	for (i = 0; i < bw_params->clk_table.num_entries; i++, j--) {
+	for (i = 0; i < bw_params->clk_table.num_entries - 1; i++, j--) {
 		bw_params->clk_table.entries[i].fclk_mhz = clock_table->DfPstateTable[j].fclk;
 		bw_params->clk_table.entries[i].memclk_mhz = clock_table->DfPstateTable[j].memclk;
 		bw_params->clk_table.entries[i].voltage = clock_table->DfPstateTable[j].voltage;
 		bw_params->clk_table.entries[i].dcfclk_mhz = find_dcfclk_for_voltage(clock_table, clock_table->DfPstateTable[j].voltage);
 	}
+	bw_params->clk_table.entries[i].fclk_mhz = clock_table->DfPstateTable[j].fclk;
+	bw_params->clk_table.entries[i].memclk_mhz = clock_table->DfPstateTable[j].memclk;
+	bw_params->clk_table.entries[i].voltage = clock_table->DfPstateTable[j].voltage;
+	bw_params->clk_table.entries[i].dcfclk_mhz = find_max_clk_value(clock_table->DcfClocks, VG_NUM_DCFCLK_DPM_LEVELS);
 
 	bw_params->vram_type = bios_info->memory_type;
 	bw_params->num_channels = bios_info->ma_channel_number;
-- 
2.39.2

[PATCH 6.1 145/224] sh: sanitize the flags on sigreturn

[Greg Kroah-Hartman]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit 573b22ccb7ce9ab7f0539a2e11a9d3609a8783f5 ]

We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/include/asm/processor_32.h | 1 +
 arch/sh/kernel/signal_32.c         | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 27aebf1e75a20..3ef7adf739c83 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -50,6 +50,7 @@
 #define SR_FD		0x00008000
 #define SR_MD		0x40000000
 
+#define SR_USER_MASK	0x00000303	// M, Q, S, T bits
 /*
  * DSP structure and data
  */
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 90f495d35db29..a6bfc6f374911 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -115,6 +115,7 @@ static int
 restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p)
 {
 	unsigned int err = 0;
+	unsigned int sr = regs->sr & ~SR_USER_MASK;
 
 #define COPY(x)		err |= __get_user(regs->x, &sc->sc_##x)
 			COPY(regs[1]);
@@ -130,6 +131,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p
 	COPY(sr);	COPY(pc);
 #undef COPY
 
+	regs->sr = (regs->sr & SR_USER_MASK) | sr;
+
 #ifdef CONFIG_SH_FPU
 	if (boot_cpu_data.flags & CPU_HAS_FPU) {
 		int owned_fp;
-- 
2.39.2

[PATCH 6.1 146/224] drm/amdgpu: Fix call trace warning and hang when removing amdgpu device

[Greg Kroah-Hartman]

From: lyndonli <Lyndon.Li@amd.com>

[ Upstream commit 93bb18d2a873d2fa9625c8ea927723660a868b95 ]

On GPUs with RAS enabled, below call trace and hang are observed when
shutting down device.

v2: use DRM device unplugged flag instead of shutdown flag as the check to
prevent memory wipe in shutdown stage.

[ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu]
[ +0.000001] PKRU: 55555554
[ +0.000001] Call Trace:
[ +0.000001] <TASK>
[ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu]
[ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu]
[ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu]
[ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu]
[ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[ +0.000090] drm_dev_release+0x28/0x50 [drm]
[ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm]
[ +0.000011] devm_action_release+0x15/0x20
[ +0.000003] release_nodes+0x40/0xc0
[ +0.000001] devres_release_all+0x9e/0xe0
[ +0.000001] device_unbind_cleanup+0x12/0x80
[ +0.000003] device_release_driver_internal+0xff/0x160
[ +0.000001] driver_detach+0x4a/0x90
[ +0.000001] bus_remove_driver+0x6c/0xf0
[ +0.000001] driver_unregister+0x31/0x50
[ +0.000001] pci_unregister_driver+0x40/0x90
[ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu]

Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
index cfd78c4a45baa..4feedf518a191 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
@@ -1312,7 +1312,7 @@ void amdgpu_bo_release_notify(struct ttm_buffer_object *bo)
 
 	if (!bo->resource || bo->resource->mem_type != TTM_PL_VRAM ||
 	    !(abo->flags & AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE) ||
-	    adev->in_suspend || adev->shutdown)
+	    adev->in_suspend || drm_dev_is_unplugged(adev_to_drm(adev)))
 		return;
 
 	if (WARN_ON_ONCE(!dma_resv_trylock(bo->base.resv)))
-- 
2.39.2

[PATCH 6.1 147/224] drm/amd: Fix initialization mistake for NBIO 7.3.0

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 1717cc5f2962a4652c76ed3858b499ccae6c277c ]

The same strapping initialization issue that happened on NBIO 7.5.1
appears to be happening on NBIO 7.3.0.
Apply the same fix to 7.3.0 as well.

Note: This workaround relies upon the integrated GPU being enabled
in BIOS. If the integrated GPU is disabled in BIOS a different
workaround will be required.

Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c b/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c
index 4b0d563c6522c..4ef1fa4603c8e 100644
--- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c
+++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c
@@ -382,11 +382,6 @@ static void nbio_v7_2_init_registers(struct amdgpu_device *adev)
 		if (def != data)
 			WREG32_PCIE_PORT(SOC15_REG_OFFSET(NBIO, 0, regBIF1_PCIE_MST_CTRL_3), data);
 		break;
-	case IP_VERSION(7, 5, 1):
-		data = RREG32_SOC15(NBIO, 0, regRCC_DEV2_EPF0_STRAP2);
-		data &= ~RCC_DEV2_EPF0_STRAP2__STRAP_NO_SOFT_RESET_DEV2_F0_MASK;
-		WREG32_SOC15(NBIO, 0, regRCC_DEV2_EPF0_STRAP2, data);
-		fallthrough;
 	default:
 		def = data = RREG32_PCIE_PORT(SOC15_REG_OFFSET(NBIO, 0, regPCIE_CONFIG_CNTL));
 		data = REG_SET_FIELD(data, PCIE_CONFIG_CNTL,
@@ -399,6 +394,15 @@ static void nbio_v7_2_init_registers(struct amdgpu_device *adev)
 		break;
 	}
 
+	switch (adev->ip_versions[NBIO_HWIP][0]) {
+	case IP_VERSION(7, 3, 0):
+	case IP_VERSION(7, 5, 1):
+		data = RREG32_SOC15(NBIO, 0, regRCC_DEV2_EPF0_STRAP2);
+		data &= ~RCC_DEV2_EPF0_STRAP2__STRAP_NO_SOFT_RESET_DEV2_F0_MASK;
+		WREG32_SOC15(NBIO, 0, regRCC_DEV2_EPF0_STRAP2, data);
+		break;
+	}
+
 	if (amdgpu_sriov_vf(adev))
 		adev->rmmio_remap.reg_offset = SOC15_REG_OFFSET(NBIO, 0,
 			regBIF_BX_PF0_HDP_MEM_COHERENCY_FLUSH_CNTL) << 2;
-- 
2.39.2

[PATCH 6.1 148/224] net/sched: act_mirred: better wording on protection against excessive stack growth

[Greg Kroah-Hartman]

From: Davide Caratti <dcaratti@redhat.com>

[ Upstream commit 78dcdffe0418ac8f3f057f26fe71ccf4d8ed851f ]

with commit e2ca070f89ec ("net: sched: protect against stack overflow in
TC act_mirred"), act_mirred protected itself against excessive stack growth
using per_cpu counter of nested calls to tcf_mirred_act(), and capping it
to MIRRED_RECURSION_LIMIT. However, such protection does not detect
recursion/loops in case the packet is enqueued to the backlog (for example,
when the mirred target device has RPS or skb timestamping enabled). Change
the wording from "recursion" to "nesting" to make it more clear to readers.

CC: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/act_mirred.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index b8ad6ae282c02..ded6ee054be14 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -28,8 +28,8 @@
 static LIST_HEAD(mirred_list);
 static DEFINE_SPINLOCK(mirred_list_lock);
 
-#define MIRRED_RECURSION_LIMIT    4
-static DEFINE_PER_CPU(unsigned int, mirred_rec_level);
+#define MIRRED_NEST_LIMIT    4
+static DEFINE_PER_CPU(unsigned int, mirred_nest_level);
 
 static bool tcf_mirred_is_act_redirect(int action)
 {
@@ -224,7 +224,7 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
 	struct sk_buff *skb2 = skb;
 	bool m_mac_header_xmit;
 	struct net_device *dev;
-	unsigned int rec_level;
+	unsigned int nest_level;
 	int retval, err = 0;
 	bool use_reinsert;
 	bool want_ingress;
@@ -235,11 +235,11 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
 	int mac_len;
 	bool at_nh;
 
-	rec_level = __this_cpu_inc_return(mirred_rec_level);
-	if (unlikely(rec_level > MIRRED_RECURSION_LIMIT)) {
+	nest_level = __this_cpu_inc_return(mirred_nest_level);
+	if (unlikely(nest_level > MIRRED_NEST_LIMIT)) {
 		net_warn_ratelimited("Packet exceeded mirred recursion limit on dev %s\n",
 				     netdev_name(skb->dev));
-		__this_cpu_dec(mirred_rec_level);
+		__this_cpu_dec(mirred_nest_level);
 		return TC_ACT_SHOT;
 	}
 
@@ -308,7 +308,7 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
 			err = tcf_mirred_forward(want_ingress, skb);
 			if (err)
 				tcf_action_inc_overlimit_qstats(&m->common);
-			__this_cpu_dec(mirred_rec_level);
+			__this_cpu_dec(mirred_nest_level);
 			return TC_ACT_CONSUMED;
 		}
 	}
@@ -320,7 +320,7 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
 		if (tcf_mirred_is_act_redirect(m_eaction))
 			retval = TC_ACT_SHOT;
 	}
-	__this_cpu_dec(mirred_rec_level);
+	__this_cpu_dec(mirred_nest_level);
 
 	return retval;
 }
-- 
2.39.2

[PATCH 6.1 149/224] act_mirred: use the backlog for nested calls to mirred ingress

[Greg Kroah-Hartman]

From: Davide Caratti <dcaratti@redhat.com>

[ Upstream commit ca22da2fbd693b54dc8e3b7b54ccc9f7e9ba3640 ]

William reports kernel soft-lockups on some OVS topologies when TC mirred
egress->ingress action is hit by local TCP traffic [1].
The same can also be reproduced with SCTP (thanks Xin for verifying), when
client and server reach themselves through mirred egress to ingress, and
one of the two peers sends a "heartbeat" packet (from within a timer).

Enqueueing to backlog proved to fix this soft lockup; however, as Cong
noticed [2], we should preserve - when possible - the current mirred
behavior that counts as "overlimits" any eventual packet drop subsequent to
the mirred forwarding action [3]. A compromise solution might use the
backlog only when tcf_mirred_act() has a nest level greater than one:
change tcf_mirred_forward() accordingly.

Also, add a kselftest that can reproduce the lockup and verifies TC mirred
ability to account for further packet drops after TC mirred egress->ingress
(when the nest level is 1).

 [1] https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
 [2] https://lore.kernel.org/netdev/Y0w%2FWWY60gqrtGLp@pop-os.localdomain/
 [3] such behavior is not guaranteed: for example, if RPS or skb RX
     timestamping is enabled on the mirred target device, the kernel
     can defer receiving the skb and return NET_RX_SUCCESS inside
     tcf_mirred_forward().

Reported-by: William Zhao <wizhao@redhat.com>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/act_mirred.c                        |  7 +++
 .../selftests/net/forwarding/tc_actions.sh    | 49 ++++++++++++++++++-
 2 files changed, 55 insertions(+), 1 deletion(-)

diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index ded6ee054be14..baeae5e5c8f0c 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -205,12 +205,19 @@ static int tcf_mirred_init(struct net *net, struct nlattr *nla,
 	return err;
 }
 
+static bool is_mirred_nested(void)
+{
+	return unlikely(__this_cpu_read(mirred_nest_level) > 1);
+}
+
 static int tcf_mirred_forward(bool want_ingress, struct sk_buff *skb)
 {
 	int err;
 
 	if (!want_ingress)
 		err = tcf_dev_queue_xmit(skb, dev_queue_xmit);
+	else if (is_mirred_nested())
+		err = netif_rx(skb);
 	else
 		err = netif_receive_skb(skb);
 
diff --git a/tools/testing/selftests/net/forwarding/tc_actions.sh b/tools/testing/selftests/net/forwarding/tc_actions.sh
index 1e0a62f638fec..919c0dd9fe4bc 100755
--- a/tools/testing/selftests/net/forwarding/tc_actions.sh
+++ b/tools/testing/selftests/net/forwarding/tc_actions.sh
@@ -3,7 +3,8 @@
 
 ALL_TESTS="gact_drop_and_ok_test mirred_egress_redirect_test \
 	mirred_egress_mirror_test matchall_mirred_egress_mirror_test \
-	gact_trap_test mirred_egress_to_ingress_test"
+	gact_trap_test mirred_egress_to_ingress_test \
+	mirred_egress_to_ingress_tcp_test"
 NUM_NETIFS=4
 source tc_common.sh
 source lib.sh
@@ -198,6 +199,52 @@ mirred_egress_to_ingress_test()
 	log_test "mirred_egress_to_ingress ($tcflags)"
 }
 
+mirred_egress_to_ingress_tcp_test()
+{
+	local tmpfile=$(mktemp) tmpfile1=$(mktemp)
+
+	RET=0
+	dd conv=sparse status=none if=/dev/zero bs=1M count=2 of=$tmpfile
+	tc filter add dev $h1 protocol ip pref 100 handle 100 egress flower \
+		$tcflags ip_proto tcp src_ip 192.0.2.1 dst_ip 192.0.2.2 \
+			action ct commit nat src addr 192.0.2.2 pipe \
+			action ct clear pipe \
+			action ct commit nat dst addr 192.0.2.1 pipe \
+			action ct clear pipe \
+			action skbedit ptype host pipe \
+			action mirred ingress redirect dev $h1
+	tc filter add dev $h1 protocol ip pref 101 handle 101 egress flower \
+		$tcflags ip_proto icmp \
+			action mirred ingress redirect dev $h1
+	tc filter add dev $h1 protocol ip pref 102 handle 102 ingress flower \
+		ip_proto icmp \
+			action drop
+
+	ip vrf exec v$h1 nc --recv-only -w10 -l -p 12345 -o $tmpfile1  &
+	local rpid=$!
+	ip vrf exec v$h1 nc -w1 --send-only 192.0.2.2 12345 <$tmpfile
+	wait -n $rpid
+	cmp -s $tmpfile $tmpfile1
+	check_err $? "server output check failed"
+
+	$MZ $h1 -c 10 -p 64 -a $h1mac -b $h1mac -A 192.0.2.1 -B 192.0.2.1 \
+		-t icmp "ping,id=42,seq=5" -q
+	tc_check_packets "dev $h1 egress" 101 10
+	check_err $? "didn't mirred redirect ICMP"
+	tc_check_packets "dev $h1 ingress" 102 10
+	check_err $? "didn't drop mirred ICMP"
+	local overlimits=$(tc_rule_stats_get ${h1} 101 egress .overlimits)
+	test ${overlimits} = 10
+	check_err $? "wrong overlimits, expected 10 got ${overlimits}"
+
+	tc filter del dev $h1 egress protocol ip pref 100 handle 100 flower
+	tc filter del dev $h1 egress protocol ip pref 101 handle 101 flower
+	tc filter del dev $h1 ingress protocol ip pref 102 handle 102 flower
+
+	rm -f $tmpfile $tmpfile1
+	log_test "mirred_egress_to_ingress_tcp ($tcflags)"
+}
+
 setup_prepare()
 {
 	h1=${NETIFS[p1]}
-- 
2.39.2

[PATCH 6.1 150/224] cifs: lock chan_lock outside match_session

[Greg Kroah-Hartman]

From: Shyam Prasad N <sprasad@microsoft.com>

commit 2f4e429c846972c8405951a9ff7a82aceeca7461 upstream.

Coverity had rightly indicated a possible deadlock
due to chan_lock being done inside match_session.
All callers of match_* functions should pick up the
necessary locks and call them.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Fixes: 724244cdb382 ("cifs: protect session channel fields with chan_lock")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/connect.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1774,7 +1774,7 @@ out_err:
 	return ERR_PTR(rc);
 }
 
-/* this function must be called with ses_lock held */
+/* this function must be called with ses_lock and chan_lock held */
 static int match_session(struct cifs_ses *ses, struct smb3_fs_context *ctx)
 {
 	if (ctx->sectype != Unspecified &&
@@ -1785,12 +1785,8 @@ static int match_session(struct cifs_ses
 	 * If an existing session is limited to less channels than
 	 * requested, it should not be reused
 	 */
-	spin_lock(&ses->chan_lock);
-	if (ses->chan_max < ctx->max_channels) {
-		spin_unlock(&ses->chan_lock);
+	if (ses->chan_max < ctx->max_channels)
 		return 0;
-	}
-	spin_unlock(&ses->chan_lock);
 
 	switch (ses->sectype) {
 	case Kerberos:
@@ -1918,10 +1914,13 @@ cifs_find_smb_ses(struct TCP_Server_Info
 			spin_unlock(&ses->ses_lock);
 			continue;
 		}
+		spin_lock(&ses->chan_lock);
 		if (!match_session(ses, ctx)) {
+			spin_unlock(&ses->chan_lock);
 			spin_unlock(&ses->ses_lock);
 			continue;
 		}
+		spin_unlock(&ses->chan_lock);
 		spin_unlock(&ses->ses_lock);
 
 		++ses->ses_count;
@@ -2742,6 +2741,7 @@ cifs_match_super(struct super_block *sb,
 
 	spin_lock(&tcp_srv->srv_lock);
 	spin_lock(&ses->ses_lock);
+	spin_lock(&ses->chan_lock);
 	spin_lock(&tcon->tc_lock);
 	if (!match_server(tcp_srv, ctx) ||
 	    !match_session(ses, ctx) ||
@@ -2754,6 +2754,7 @@ cifs_match_super(struct super_block *sb,
 	rc = compare_mount_options(sb, mnt_data);
 out:
 	spin_unlock(&tcon->tc_lock);
+	spin_unlock(&ses->chan_lock);
 	spin_unlock(&ses->ses_lock);
 	spin_unlock(&tcp_srv->srv_lock);
 

[PATCH 6.1 151/224] cifs: append path to open_enter trace event

[Greg Kroah-Hartman]

From: Shyam Prasad N <sprasad@microsoft.com>

commit fddc6ccc487e5de07b98df8d04118d5dcb5e0407 upstream.

We do not dump the file path for smb3_open_enter ftrace
calls, which is a severe handicap while debugging
using ftrace evens. This change adds that info.

Unfortunately, we're not updating the path in open params
in many places; which I had to do as a part of this change.
SMB2_open gets path in utf16 format, but it's easier of
path is supplied as char pointer in oparms.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/cached_dir.c |    1 +
 fs/cifs/link.c       |    2 ++
 fs/cifs/smb2inode.c  |    1 +
 fs/cifs/smb2ops.c    |   11 +++++++++++
 fs/cifs/smb2pdu.c    |    4 ++--
 fs/cifs/trace.h      |   12 ++++++++----
 6 files changed, 25 insertions(+), 6 deletions(-)

--- a/fs/cifs/cached_dir.c
+++ b/fs/cifs/cached_dir.c
@@ -184,6 +184,7 @@ int open_cached_dir(unsigned int xid, st
 
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = path,
 		.create_options = cifs_create_options(cifs_sb, CREATE_NOT_FILE),
 		.desired_access = FILE_READ_ATTRIBUTES,
 		.disposition = FILE_OPEN,
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -360,6 +360,7 @@ smb3_query_mf_symlink(unsigned int xid,
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
 		.cifs_sb = cifs_sb,
+		.path = path,
 		.desired_access = GENERIC_READ,
 		.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR),
 		.disposition = FILE_OPEN,
@@ -427,6 +428,7 @@ smb3_create_mf_symlink(unsigned int xid,
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
 		.cifs_sb = cifs_sb,
+		.path = path,
 		.desired_access = GENERIC_WRITE,
 		.create_options = cifs_create_options(cifs_sb, CREATE_NOT_DIR),
 		.disposition = FILE_CREATE,
--- a/fs/cifs/smb2inode.c
+++ b/fs/cifs/smb2inode.c
@@ -106,6 +106,7 @@ static int smb2_compound_op(const unsign
 
 	vars->oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = full_path,
 		.desired_access = desired_access,
 		.disposition = create_disposition,
 		.create_options = cifs_create_options(cifs_sb, create_options),
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -731,6 +731,7 @@ smb3_qfs_tcon(const unsigned int xid, st
 
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = "",
 		.desired_access = FILE_READ_ATTRIBUTES,
 		.disposition = FILE_OPEN,
 		.create_options = cifs_create_options(cifs_sb, 0),
@@ -774,6 +775,7 @@ smb2_qfs_tcon(const unsigned int xid, st
 
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = "",
 		.desired_access = FILE_READ_ATTRIBUTES,
 		.disposition = FILE_OPEN,
 		.create_options = cifs_create_options(cifs_sb, 0),
@@ -821,6 +823,7 @@ smb2_is_path_accessible(const unsigned i
 
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = full_path,
 		.desired_access = FILE_READ_ATTRIBUTES,
 		.disposition = FILE_OPEN,
 		.create_options = cifs_create_options(cifs_sb, 0),
@@ -1105,6 +1108,7 @@ smb2_set_ea(const unsigned int xid, stru
 
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = path,
 		.desired_access = FILE_WRITE_EA,
 		.disposition = FILE_OPEN,
 		.create_options = cifs_create_options(cifs_sb, 0),
@@ -2096,6 +2100,7 @@ smb3_notify(const unsigned int xid, stru
 	tcon = cifs_sb_master_tcon(cifs_sb);
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = path,
 		.desired_access = FILE_READ_ATTRIBUTES | FILE_READ_DATA,
 		.disposition = FILE_OPEN,
 		.create_options = cifs_create_options(cifs_sb, 0),
@@ -2168,6 +2173,7 @@ smb2_query_dir_first(const unsigned int
 
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = path,
 		.desired_access = FILE_READ_ATTRIBUTES | FILE_READ_DATA,
 		.disposition = FILE_OPEN,
 		.create_options = cifs_create_options(cifs_sb, 0),
@@ -2500,6 +2506,7 @@ smb2_query_info_compound(const unsigned
 
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = path,
 		.desired_access = desired_access,
 		.disposition = FILE_OPEN,
 		.create_options = cifs_create_options(cifs_sb, 0),
@@ -2634,6 +2641,7 @@ smb311_queryfs(const unsigned int xid, s
 
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = "",
 		.desired_access = FILE_READ_ATTRIBUTES,
 		.disposition = FILE_OPEN,
 		.create_options = cifs_create_options(cifs_sb, 0),
@@ -2928,6 +2936,7 @@ smb2_query_symlink(const unsigned int xi
 
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = full_path,
 		.desired_access = FILE_READ_ATTRIBUTES,
 		.disposition = FILE_OPEN,
 		.create_options = cifs_create_options(cifs_sb, create_options),
@@ -3068,6 +3077,7 @@ smb2_query_reparse_tag(const unsigned in
 
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = full_path,
 		.desired_access = FILE_READ_ATTRIBUTES,
 		.disposition = FILE_OPEN,
 		.create_options = cifs_create_options(cifs_sb, OPEN_REPARSE_POINT),
@@ -3208,6 +3218,7 @@ get_smb2_acl_by_path(struct cifs_sb_info
 
 	oparms = (struct cifs_open_parms) {
 		.tcon = tcon,
+		.path = path,
 		.desired_access = READ_CONTROL,
 		.disposition = FILE_OPEN,
 		/*
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -2742,7 +2742,7 @@ int smb311_posix_mkdir(const unsigned in
 	rqst.rq_nvec = n_iov;
 
 	/* no need to inc num_remote_opens because we close it just below */
-	trace_smb3_posix_mkdir_enter(xid, tcon->tid, ses->Suid, CREATE_NOT_FILE,
+	trace_smb3_posix_mkdir_enter(xid, tcon->tid, ses->Suid, full_path, CREATE_NOT_FILE,
 				    FILE_WRITE_ATTRIBUTES);
 	/* resource #4: response buffer */
 	rc = cifs_send_recv(xid, ses, server,
@@ -3010,7 +3010,7 @@ SMB2_open(const unsigned int xid, struct
 	if (rc)
 		goto creat_exit;
 
-	trace_smb3_open_enter(xid, tcon->tid, tcon->ses->Suid,
+	trace_smb3_open_enter(xid, tcon->tid, tcon->ses->Suid, oparms->path,
 		oparms->create_options, oparms->desired_access);
 
 	rc = cifs_send_recv(xid, ses, server,
--- a/fs/cifs/trace.h
+++ b/fs/cifs/trace.h
@@ -701,13 +701,15 @@ DECLARE_EVENT_CLASS(smb3_open_enter_clas
 	TP_PROTO(unsigned int xid,
 		__u32	tid,
 		__u64	sesid,
+		const char *full_path,
 		int	create_options,
 		int	desired_access),
-	TP_ARGS(xid, tid, sesid, create_options, desired_access),
+	TP_ARGS(xid, tid, sesid, full_path, create_options, desired_access),
 	TP_STRUCT__entry(
 		__field(unsigned int, xid)
 		__field(__u32, tid)
 		__field(__u64, sesid)
+		__string(path, full_path)
 		__field(int, create_options)
 		__field(int, desired_access)
 	),
@@ -715,11 +717,12 @@ DECLARE_EVENT_CLASS(smb3_open_enter_clas
 		__entry->xid = xid;
 		__entry->tid = tid;
 		__entry->sesid = sesid;
+		__assign_str(path, full_path);
 		__entry->create_options = create_options;
 		__entry->desired_access = desired_access;
 	),
-	TP_printk("xid=%u sid=0x%llx tid=0x%x cr_opts=0x%x des_access=0x%x",
-		__entry->xid, __entry->sesid, __entry->tid,
+	TP_printk("xid=%u sid=0x%llx tid=0x%x path=%s cr_opts=0x%x des_access=0x%x",
+		__entry->xid, __entry->sesid, __entry->tid, __get_str(path),
 		__entry->create_options, __entry->desired_access)
 )
 
@@ -728,9 +731,10 @@ DEFINE_EVENT(smb3_open_enter_class, smb3
 	TP_PROTO(unsigned int xid,		\
 		__u32	tid,			\
 		__u64	sesid,			\
+		const char *full_path,		\
 		int	create_options,		\
 		int	desired_access),	\
-	TP_ARGS(xid, tid, sesid, create_options, desired_access))
+	TP_ARGS(xid, tid, sesid, full_path, create_options, desired_access))
 
 DEFINE_SMB3_OPEN_ENTER_EVENT(open_enter);
 DEFINE_SMB3_OPEN_ENTER_EVENT(posix_mkdir_enter);

[PATCH 6.1 152/224] cifs: do not poll server interfaces too regularly

[Greg Kroah-Hartman]

From: Shyam Prasad N <sprasad@microsoft.com>

commit 072a28c8907c841f7d4b56c78bce46d3ee211e73 upstream.

We have the server interface list hanging off the tcon
structure today for reasons unknown. So each tcon which is
connected to a file server can query them separately,
which is really unnecessary. To avoid this, in the query
function, we will check the time of last update of the
interface list, and avoid querying the server if it is
within a certain range.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/smb2ops.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -530,6 +530,14 @@ parse_server_interfaces(struct network_i
 	p = buf;
 
 	spin_lock(&ses->iface_lock);
+	/* do not query too frequently, this time with lock held */
+	if (ses->iface_last_update &&
+	    time_before(jiffies, ses->iface_last_update +
+			(SMB_INTERFACE_POLL_INTERVAL * HZ))) {
+		spin_unlock(&ses->iface_lock);
+		return 0;
+	}
+
 	/*
 	 * Go through iface_list and do kref_put to remove
 	 * any unused ifaces. ifaces in use will be removed
@@ -696,6 +704,12 @@ SMB3_request_interfaces(const unsigned i
 	struct network_interface_info_ioctl_rsp *out_buf = NULL;
 	struct cifs_ses *ses = tcon->ses;
 
+	/* do not query too frequently */
+	if (ses->iface_last_update &&
+	    time_before(jiffies, ses->iface_last_update +
+			(SMB_INTERFACE_POLL_INTERVAL * HZ)))
+		return 0;
+
 	rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID,
 			FSCTL_QUERY_NETWORK_INTERFACE_INFO,
 			NULL /* no data input */, 0 /* no data input */,

[PATCH 6.1 153/224] cifs: empty interface list when server doesnt support query interfaces

[Greg Kroah-Hartman]

From: Shyam Prasad N <sprasad@microsoft.com>

commit 896cd316b841053f6df95ab77b5f1322c16a8e18 upstream.

When querying server interfaces returns -EOPNOTSUPP,
clear the list of interfaces. Assumption is that multichannel
would be disabled too.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/smb2ops.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -717,7 +717,7 @@ SMB3_request_interfaces(const unsigned i
 	if (rc == -EOPNOTSUPP) {
 		cifs_dbg(FYI,
 			 "server does not support query network interfaces\n");
-		goto out;
+		ret_data_len = 0;
 	} else if (rc != 0) {
 		cifs_tcon_dbg(VFS, "error %d on ioctl to get interface list\n", rc);
 		goto out;

[PATCH 6.1 154/224] cifs: dump pending mids for all channels in DebugData

[Greg Kroah-Hartman]

From: Shyam Prasad N <sprasad@microsoft.com>

commit d12bc6d26f92c51b28e8f4a146ffcc630b688198 upstream.

Currently, we only dump the pending mid information only
on the primary channel in /proc/fs/cifs/DebugData.
If multichannel is active, we do not print the pending MID
list on secondary channels.

This change will dump the pending mids for all the channels
based on server->conn_id.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/cifs_debug.c |   41 +++++++++++++++++++++++++++--------------
 1 file changed, 27 insertions(+), 14 deletions(-)

--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -215,6 +215,7 @@ static int cifs_debug_data_proc_show(str
 {
 	struct mid_q_entry *mid_entry;
 	struct TCP_Server_Info *server;
+	struct TCP_Server_Info *chan_server;
 	struct cifs_ses *ses;
 	struct cifs_tcon *tcon;
 	struct cifs_server_iface *iface;
@@ -458,23 +459,35 @@ skip_rdma:
 					seq_puts(m, "\t\t[CONNECTED]\n");
 			}
 			spin_unlock(&ses->iface_lock);
+
+			seq_puts(m, "\n\n\tMIDs: ");
+			spin_lock(&ses->chan_lock);
+			for (j = 0; j < ses->chan_count; j++) {
+				chan_server = ses->chans[j].server;
+				if (!chan_server)
+					continue;
+
+				if (list_empty(&chan_server->pending_mid_q))
+					continue;
+
+				seq_printf(m, "\n\tServer ConnectionId: 0x%llx",
+					   chan_server->conn_id);
+				spin_lock(&chan_server->mid_lock);
+				list_for_each_entry(mid_entry, &chan_server->pending_mid_q, qhead) {
+					seq_printf(m, "\n\t\tState: %d com: %d pid: %d cbdata: %p mid %llu",
+						   mid_entry->mid_state,
+						   le16_to_cpu(mid_entry->command),
+						   mid_entry->pid,
+						   mid_entry->callback_data,
+						   mid_entry->mid);
+				}
+				spin_unlock(&chan_server->mid_lock);
+			}
+			spin_unlock(&ses->chan_lock);
+			seq_puts(m, "\n--\n");
 		}
 		if (i == 0)
 			seq_printf(m, "\n\t\t[NONE]");
-
-		seq_puts(m, "\n\n\tMIDs: ");
-		spin_lock(&server->mid_lock);
-		list_for_each_entry(mid_entry, &server->pending_mid_q, qhead) {
-			seq_printf(m, "\n\tState: %d com: %d pid:"
-					" %d cbdata: %p mid %llu\n",
-					mid_entry->mid_state,
-					le16_to_cpu(mid_entry->command),
-					mid_entry->pid,
-					mid_entry->callback_data,
-					mid_entry->mid);
-		}
-		spin_unlock(&server->mid_lock);
-		seq_printf(m, "\n--\n");
 	}
 	if (c == 0)
 		seq_printf(m, "\n\t[NONE]");

[PATCH 6.1 155/224] cifs: print session id while listing open files

[Greg Kroah-Hartman]

From: Shyam Prasad N <sprasad@microsoft.com>

commit 175b54abc443b6965e9379b71ec05f7c73c192e9 upstream.

In the output of /proc/fs/cifs/open_files, we only print
the tree id for the tcon of each open file. It becomes
difficult to know which tcon these files belong to with
just the tree id.

This change dumps ses id in addition to all other data today.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/cifs_debug.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -175,7 +175,7 @@ static int cifs_debug_files_proc_show(st
 
 	seq_puts(m, "# Version:1\n");
 	seq_puts(m, "# Format:\n");
-	seq_puts(m, "# <tree id> <persistent fid> <flags> <count> <pid> <uid>");
+	seq_puts(m, "# <tree id> <ses id> <persistent fid> <flags> <count> <pid> <uid>");
 #ifdef CONFIG_CIFS_DEBUG2
 	seq_printf(m, " <filename> <mid>\n");
 #else
@@ -188,8 +188,9 @@ static int cifs_debug_files_proc_show(st
 				spin_lock(&tcon->open_file_lock);
 				list_for_each_entry(cfile, &tcon->openFileList, tlist) {
 					seq_printf(m,
-						"0x%x 0x%llx 0x%x %d %d %d %pd",
+						"0x%x 0x%llx 0x%llx 0x%x %d %d %d %pd",
 						tcon->tid,
+						ses->Suid,
 						cfile->fid.persistent_fid,
 						cfile->f_flags,
 						cfile->count,

[PATCH 6.1 156/224] cifs: fix dentry lookups in directory handle cache

[Greg Kroah-Hartman]

From: Paulo Alcantara <pc@manguebit.com>

commit be4fde79812f02914e350bde0bc4cfeae8429378 upstream.

Get rid of any prefix paths in @path before lookup_positive_unlocked()
as it will call ->lookup() which already adds those prefix paths
through build_path_from_dentry().

This has caused a performance regression when mounting shares with a
prefix path where readdir(2) would end up retrying several times to
open bad directory names that contained duplicate prefix paths.

Fix this by skipping any prefix paths in @path before calling
lookup_positive_unlocked().

Fixes: e4029e072673 ("cifs: find and use the dentry for cached non-root directories also")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/cached_dir.c |   36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

--- a/fs/cifs/cached_dir.c
+++ b/fs/cifs/cached_dir.c
@@ -99,6 +99,23 @@ path_to_dentry(struct cifs_sb_info *cifs
 	return dentry;
 }
 
+static const char *path_no_prefix(struct cifs_sb_info *cifs_sb,
+				  const char *path)
+{
+	size_t len = 0;
+
+	if (!*path)
+		return path;
+
+	if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_USE_PREFIX_PATH) &&
+	    cifs_sb->prepath) {
+		len = strlen(cifs_sb->prepath) + 1;
+		if (unlikely(len > strlen(path)))
+			return ERR_PTR(-EINVAL);
+	}
+	return path + len;
+}
+
 /*
  * Open the and cache a directory handle.
  * If error then *cfid is not initialized.
@@ -125,6 +142,7 @@ int open_cached_dir(unsigned int xid, st
 	struct dentry *dentry = NULL;
 	struct cached_fid *cfid;
 	struct cached_fids *cfids;
+	const char *npath;
 
 	if (tcon == NULL || tcon->cfids == NULL || tcon->nohandlecache ||
 	    is_smb1_server(tcon->ses->server))
@@ -161,6 +179,20 @@ int open_cached_dir(unsigned int xid, st
 	}
 
 	/*
+	 * Skip any prefix paths in @path as lookup_positive_unlocked() ends up
+	 * calling ->lookup() which already adds those through
+	 * build_path_from_dentry().  Also, do it earlier as we might reconnect
+	 * below when trying to send compounded request and then potentially
+	 * having a different prefix path (e.g. after DFS failover).
+	 */
+	npath = path_no_prefix(cifs_sb, path);
+	if (IS_ERR(npath)) {
+		rc = PTR_ERR(npath);
+		kfree(utf16_path);
+		return rc;
+	}
+
+	/*
 	 * We do not hold the lock for the open because in case
 	 * SMB2_open needs to reconnect.
 	 * This is safe because no other thread will be able to get a ref
@@ -252,10 +284,10 @@ int open_cached_dir(unsigned int xid, st
 				(char *)&cfid->file_all_info))
 		cfid->file_all_info_is_valid = true;
 
-	if (!path[0])
+	if (!npath[0])
 		dentry = dget(cifs_sb->root);
 	else {
-		dentry = path_to_dentry(cifs_sb, path);
+		dentry = path_to_dentry(cifs_sb, npath);
 		if (IS_ERR(dentry)) {
 			rc = -ENOENT;
 			goto oshr_free;

[PATCH 6.1 157/224] x86/fpu/xstate: Prevent false-positive warning in __copy_xstate_uabi_buf()

[Greg Kroah-Hartman]

From: Chang S. Bae <chang.seok.bae@intel.com>

commit b15888840207c2bfe678dd1f68a32db54315e71f upstream.

__copy_xstate_to_uabi_buf() copies either from the tasks XSAVE buffer
or from init_fpstate into the ptrace buffer. Dynamic features, like
XTILEDATA, have an all zeroes init state and are not saved in
init_fpstate, which means the corresponding bit is not set in the
xfeatures bitmap of the init_fpstate header.

But __copy_xstate_to_uabi_buf() retrieves addresses for both the tasks
xstate and init_fpstate unconditionally via __raw_xsave_addr().

So if the tasks XSAVE buffer has a dynamic feature set, then the
address retrieval for init_fpstate triggers the warning in
__raw_xsave_addr() which checks the feature bit in the init_fpstate
header.

Remove the address retrieval from init_fpstate for extended features.
They have an all zeroes init state so init_fpstate has zeros for them.
Then zeroing the user buffer for the init state is the same as copying
them from init_fpstate.

Fixes: 2308ee57d93d ("x86/fpu/amx: Enable the AMX feature in 64-bit mode")
Reported-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/kvm/20230221163655.920289-2-mizhang@google.com/
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/all/20230227210504.18520-2-chang.seok.bae%40intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/fpu/xstate.c |   30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -1118,21 +1118,20 @@ void __copy_xstate_to_uabi_buf(struct me
 	zerofrom = offsetof(struct xregs_state, extended_state_area);
 
 	/*
-	 * The ptrace buffer is in non-compacted XSAVE format.  In
-	 * non-compacted format disabled features still occupy state space,
-	 * but there is no state to copy from in the compacted
-	 * init_fpstate. The gap tracking will zero these states.
+	 * This 'mask' indicates which states to copy from fpstate.
+	 * Those extended states that are not present in fpstate are
+	 * either disabled or initialized:
+	 *
+	 * In non-compacted format, disabled features still occupy
+	 * state space but there is no state to copy from in the
+	 * compacted init_fpstate. The gap tracking will zero these
+	 * states.
+	 *
+	 * The extended features have an all zeroes init state. Thus,
+	 * remove them from 'mask' to zero those features in the user
+	 * buffer instead of retrieving them from init_fpstate.
 	 */
-	mask = fpstate->user_xfeatures;
-
-	/*
-	 * Dynamic features are not present in init_fpstate. When they are
-	 * in an all zeros init state, remove those from 'mask' to zero
-	 * those features in the user buffer instead of retrieving them
-	 * from init_fpstate.
-	 */
-	if (fpu_state_size_dynamic())
-		mask &= (header.xfeatures | xinit->header.xcomp_bv);
+	mask = header.xfeatures;
 
 	for_each_extended_xfeature(i, mask) {
 		/*
@@ -1151,9 +1150,8 @@ void __copy_xstate_to_uabi_buf(struct me
 			pkru.pkru = pkru_val;
 			membuf_write(&to, &pkru, sizeof(pkru));
 		} else {
-			copy_feature(header.xfeatures & BIT_ULL(i), &to,
+			membuf_write(&to,
 				     __raw_xsave_addr(xsave, i),
-				     __raw_xsave_addr(xinit, i),
 				     xstate_sizes[i]);
 		}
 		/*

[PATCH 6.1 158/224] selftests/x86/amx: Add a ptrace test

[Greg Kroah-Hartman]

From: Chang S. Bae <chang.seok.bae@intel.com>

commit 62faca1ca10cc84e99ae7f38aa28df2bc945369b upstream.

Include a test case to validate the XTILEDATA injection to the target.

Also, it ensures the kernel's ability to copy states between different
XSAVE formats.

Refactor the memcmp() code to be usable for the state validation.

Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230227210504.18520-3-chang.seok.bae%40intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/x86/amx.c |  108 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 105 insertions(+), 3 deletions(-)

--- a/tools/testing/selftests/x86/amx.c
+++ b/tools/testing/selftests/x86/amx.c
@@ -14,8 +14,10 @@
 #include <sys/auxv.h>
 #include <sys/mman.h>
 #include <sys/shm.h>
+#include <sys/ptrace.h>
 #include <sys/syscall.h>
 #include <sys/wait.h>
+#include <sys/uio.h>
 
 #include "../kselftest.h" /* For __cpuid_count() */
 
@@ -583,6 +585,13 @@ static void test_dynamic_state(void)
 	_exit(0);
 }
 
+static inline int __compare_tiledata_state(struct xsave_buffer *xbuf1, struct xsave_buffer *xbuf2)
+{
+	return memcmp(&xbuf1->bytes[xtiledata.xbuf_offset],
+		      &xbuf2->bytes[xtiledata.xbuf_offset],
+		      xtiledata.size);
+}
+
 /*
  * Save current register state and compare it to @xbuf1.'
  *
@@ -599,9 +608,7 @@ static inline bool __validate_tiledata_r
 		fatal_error("failed to allocate XSAVE buffer\n");
 
 	xsave(xbuf2, XFEATURE_MASK_XTILEDATA);
-	ret = memcmp(&xbuf1->bytes[xtiledata.xbuf_offset],
-		     &xbuf2->bytes[xtiledata.xbuf_offset],
-		     xtiledata.size);
+	ret = __compare_tiledata_state(xbuf1, xbuf2);
 
 	free(xbuf2);
 
@@ -826,6 +833,99 @@ static void test_context_switch(void)
 	free(finfo);
 }
 
+/* Ptrace test */
+
+/*
+ * Make sure the ptracee has the expanded kernel buffer on the first
+ * use. Then, initialize the state before performing the state
+ * injection from the ptracer.
+ */
+static inline void ptracee_firstuse_tiledata(void)
+{
+	load_rand_tiledata(stashed_xsave);
+	init_xtiledata();
+}
+
+/*
+ * Ptracer injects the randomized tile data state. It also reads
+ * before and after that, which will execute the kernel's state copy
+ * functions. So, the tester is advised to double-check any emitted
+ * kernel messages.
+ */
+static void ptracer_inject_tiledata(pid_t target)
+{
+	struct xsave_buffer *xbuf;
+	struct iovec iov;
+
+	xbuf = alloc_xbuf();
+	if (!xbuf)
+		fatal_error("unable to allocate XSAVE buffer");
+
+	printf("\tRead the init'ed tiledata via ptrace().\n");
+
+	iov.iov_base = xbuf;
+	iov.iov_len = xbuf_size;
+
+	memset(stashed_xsave, 0, xbuf_size);
+
+	if (ptrace(PTRACE_GETREGSET, target, (uint32_t)NT_X86_XSTATE, &iov))
+		fatal_error("PTRACE_GETREGSET");
+
+	if (!__compare_tiledata_state(stashed_xsave, xbuf))
+		printf("[OK]\tThe init'ed tiledata was read from ptracee.\n");
+	else
+		printf("[FAIL]\tThe init'ed tiledata was not read from ptracee.\n");
+
+	printf("\tInject tiledata via ptrace().\n");
+
+	load_rand_tiledata(xbuf);
+
+	memcpy(&stashed_xsave->bytes[xtiledata.xbuf_offset],
+	       &xbuf->bytes[xtiledata.xbuf_offset],
+	       xtiledata.size);
+
+	if (ptrace(PTRACE_SETREGSET, target, (uint32_t)NT_X86_XSTATE, &iov))
+		fatal_error("PTRACE_SETREGSET");
+
+	if (ptrace(PTRACE_GETREGSET, target, (uint32_t)NT_X86_XSTATE, &iov))
+		fatal_error("PTRACE_GETREGSET");
+
+	if (!__compare_tiledata_state(stashed_xsave, xbuf))
+		printf("[OK]\tTiledata was correctly written to ptracee.\n");
+	else
+		printf("[FAIL]\tTiledata was not correctly written to ptracee.\n");
+}
+
+static void test_ptrace(void)
+{
+	pid_t child;
+	int status;
+
+	child = fork();
+	if (child < 0) {
+		err(1, "fork");
+	} else if (!child) {
+		if (ptrace(PTRACE_TRACEME, 0, NULL, NULL))
+			err(1, "PTRACE_TRACEME");
+
+		ptracee_firstuse_tiledata();
+
+		raise(SIGTRAP);
+		_exit(0);
+	}
+
+	do {
+		wait(&status);
+	} while (WSTOPSIG(status) != SIGTRAP);
+
+	ptracer_inject_tiledata(child);
+
+	ptrace(PTRACE_DETACH, child, NULL, NULL);
+	wait(&status);
+	if (!WIFEXITED(status) || WEXITSTATUS(status))
+		err(1, "ptrace test");
+}
+
 int main(void)
 {
 	/* Check hardware availability at first */
@@ -846,6 +946,8 @@ int main(void)
 	ctxtswtest_config.num_threads = 5;
 	test_context_switch();
 
+	test_ptrace();
+
 	clearhandler(SIGILL);
 	free_stashed_xsave();
 

[PATCH 6.1 159/224] scsi: core: Add BLIST_SKIP_VPD_PAGES for SKhynix H28U74301AMR

[Greg Kroah-Hartman]

From: Joel Selvaraj <joelselvaraj.oss@gmail.com>

commit a204b490595de71016b2360a1886ec8c12d0afac upstream.

Xiaomi Poco F1 (qcom/sdm845-xiaomi-beryllium*.dts) comes with a SKhynix
H28U74301AMR UFS. The sd_read_cpr() operation leads to a 120 second
timeout, making the device bootup very slow:

[  121.457736] sd 0:0:0:1: [sdb] tag#23 timing out command, waited 120s

Setting the BLIST_SKIP_VPD_PAGES allows the device to skip the failing
sd_read_cpr operation and boot normally.

Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Link: https://lore.kernel.org/r/20230313041402.39330-1-joelselvaraj.oss@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/scsi_devinfo.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -234,6 +234,7 @@ static struct {
 	{"SGI", "RAID5", "*", BLIST_SPARSELUN},
 	{"SGI", "TP9100", "*", BLIST_REPORTLUN2},
 	{"SGI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
+	{"SKhynix", "H28U74301AMR", NULL, BLIST_SKIP_VPD_PAGES},
 	{"IBM", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"SUN", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"DELL", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},

[PATCH 6.1 160/224] usb: misc: onboard-hub: add support for Microchip USB2517 USB 2.0 hub

[Greg Kroah-Hartman]

From: Alexander Stein <alexander.stein@ew.tq-group.com>

commit f7c13cb48e85538709850589b496c4ddb3d3898e upstream.

Add support for Microchip USB2517 USB 2.0 hub to the onboard usb hub
driver. Adopt the generic usb-device compatible ("usbVID,PID").
This hub has the same reset timings as USB2514, so reuse that one.
There is also an USB2517I which just has industrial temperature range.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: stable <stable@kernel.org>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230223073920.2912298-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/onboard_usb_hub.c |    1 +
 drivers/usb/misc/onboard_usb_hub.h |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -406,6 +406,7 @@ static void onboard_hub_usbdev_disconnec
 
 static const struct usb_device_id onboard_hub_id_table[] = {
 	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */
+	{ USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2517) }, /* USB2517 USB 2.0 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
 	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
--- a/drivers/usb/misc/onboard_usb_hub.h
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -24,6 +24,7 @@ static const struct onboard_hub_pdata ti
 
 static const struct of_device_id onboard_hub_match[] = {
 	{ .compatible = "usb424,2514", .data = &microchip_usb424_data, },
+	{ .compatible = "usb424,2517", .data = &microchip_usb424_data, },
 	{ .compatible = "usb451,8140", .data = &ti_tusb8041_data, },
 	{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
 	{ .compatible = "usbbda,411", .data = &realtek_rts5411_data, },

[PATCH 6.1 161/224] usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"

[Greg Kroah-Hartman]

From: Ziyang Huang <hzyitc@outlook.com>

commit 82f5332d3b9872ab5b287e85c57b76d8bb640cd1 upstream.

Some boards might use USB-A female connector for USB ports, however,
the port could be connected to a dual-mode USB controller, making it
also behaves as a peripheral device if male-to-male cable is connected.

In this case, the dts looks like this:

	&usb0 {
		status = "okay";
		dr_mode = "otg";
		usb-role-switch;
		role-switch-default-mode = "host";
	};

After boot, dwc2_ovr_init() sets GOTGCTL to GOTGCTL_AVALOVAL and call
dwc2_force_mode() with parameter host=false, which causes inconsistent
mode - The hardware is in peripheral mode while the kernel status is
in host mode.

What we can do now is to call dwc2_drd_role_sw_set() to switch to
device mode, and everything should work just fine now, even switching
back to none(default) mode afterwards.

Fixes: e14acb876985 ("usb: dwc2: drd: add role-switch-default-node support")
Cc: stable <stable@kernel.org>
Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/SG2PR01MB204837BF68EDB0E343D2A375C9A59@SG2PR01MB2048.apcprd01.prod.exchangelabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/drd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc2/drd.c
+++ b/drivers/usb/dwc2/drd.c
@@ -35,7 +35,8 @@ static void dwc2_ovr_init(struct dwc2_hs
 
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 
-	dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST));
+	dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST) ||
+				(hsotg->role_sw_default_mode == USB_DR_MODE_HOST));
 }
 
 static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)

[PATCH 6.1 162/224] usb: dwc2: fix a devres leak in hw_enable upon suspend resume

[Greg Kroah-Hartman]

From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>

commit f747313249b74f323ddf841a9c8db14d989f296a upstream.

Each time the platform goes to low power, PM suspend / resume routines
call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset().
This adds a new devres each time.
This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be
called from udc_start().

This can be seen with tracing:
- echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable
- go to low power
- cat /sys/kernel/debug/tracing/trace

A new "ADD" entry is found upon each low power cycle:
... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes)
... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes)
...

A second issue is addressed here:
- regulator_bulk_enable() is called upon each PM cycle (suspend/resume).
- regulator_bulk_disable() never gets called.

So the reference count for these regulators constantly increase, by one
upon each low power cycle, due to missing regulator_bulk_disable() call
in __dwc2_lowlevel_hw_disable().

The original fix that introduced the devm_add_action_or_reset() call,
fixed an issue during probe, that happens due to other errors in
dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without
disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL.

Rather fix the error path: disable all the low level hardware in the
error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode
has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable().
"ll_hw_enabled" should achieve the same (and is used currently in the
remove() routine).

Fixes: 54c196060510 ("usb: dwc2: Always disable regulators on driver teardown")
Fixes: 33a06f1300a7 ("usb: dwc2: Fix error path in gadget registration")
Cc: stable <stable@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230316084127.126084-1-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/platform.c |   16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -91,13 +91,6 @@ static int dwc2_get_dr_mode(struct dwc2_
 	return 0;
 }
 
-static void __dwc2_disable_regulators(void *data)
-{
-	struct dwc2_hsotg *hsotg = data;
-
-	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
-}
-
 static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
 {
 	struct platform_device *pdev = to_platform_device(hsotg->dev);
@@ -108,11 +101,6 @@ static int __dwc2_lowlevel_hw_enable(str
 	if (ret)
 		return ret;
 
-	ret = devm_add_action_or_reset(&pdev->dev,
-				       __dwc2_disable_regulators, hsotg);
-	if (ret)
-		return ret;
-
 	if (hsotg->clk) {
 		ret = clk_prepare_enable(hsotg->clk);
 		if (ret)
@@ -168,7 +156,7 @@ static int __dwc2_lowlevel_hw_disable(st
 	if (hsotg->clk)
 		clk_disable_unprepare(hsotg->clk);
 
-	return 0;
+	return regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
 }
 
 /**
@@ -607,7 +595,7 @@ error_init:
 	if (hsotg->params.activate_stm_id_vb_detection)
 		regulator_disable(hsotg->usb33d);
 error:
-	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL)
+	if (hsotg->ll_hw_enabled)
 		dwc2_lowlevel_hw_disable(hsotg);
 	return retval;
 }

[PATCH 6.1 163/224] usb: gadget: u_audio: dont let userspace block driver unbind

[Greg Kroah-Hartman]

From: Alvin Šipraga <alsi@bang-olufsen.dk>

commit 6c67ed9ad9b83e453e808f9b31a931a20a25629b upstream.

In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free()
via g_audio_cleanup() will disconnect the card and then wait for all
resources to be released, which happens when the refcount falls to zero.
Since userspace can keep the refcount incremented by not closing the
relevant file descriptor, the call to unbind may block indefinitely.
This can cause a deadlock during reboot, as evidenced by the following
blocked task observed on my machine:

  task:reboot  state:D stack:0   pid:2827  ppid:569    flags:0x0000000c
  Call trace:
   __switch_to+0xc8/0x140
   __schedule+0x2f0/0x7c0
   schedule+0x60/0xd0
   schedule_timeout+0x180/0x1d4
   wait_for_completion+0x78/0x180
   snd_card_free+0x90/0xa0
   g_audio_cleanup+0x2c/0x64
   afunc_unbind+0x28/0x60
   ...
   kernel_restart+0x4c/0xac
   __do_sys_reboot+0xcc/0x1ec
   __arm64_sys_reboot+0x28/0x30
   invoke_syscall+0x4c/0x110
   ...

The issue can also be observed by opening the card with arecord and
then stopping the process through the shell before unbinding:

  # arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
  Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo
  ^Z[1]+  Stopped                    arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
  # echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind
  (observe that the unbind command never finishes)

Fix the problem by using snd_card_free_when_closed() instead, which will
still disconnect the card as desired, but defer the task of freeing the
resources to the core once userspace closes its file descriptor.

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Reviewed-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20230302163648.3349669-1-alvin@pqrs.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/u_audio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -1422,7 +1422,7 @@ void g_audio_cleanup(struct g_audio *g_a
 	uac = g_audio->uac;
 	card = uac->card;
 	if (card)
-		snd_card_free(card);
+		snd_card_free_when_closed(card);
 
 	kfree(uac->p_prm.reqs);
 	kfree(uac->c_prm.reqs);

[PATCH 6.1 164/224] btrfs: zoned: fix btrfs_can_activate_zone() to support DUP profile

[Greg Kroah-Hartman]

From: Naohiro Aota <naohiro.aota@wdc.com>

commit 9e1cdf0c354e46e428c0e0cab008abbe81b6013d upstream.

btrfs_can_activate_zone() returns true if at least one device has one zone
available for activation. This is OK for the single profile, but not OK for
DUP profile. We need two zones to create a DUP block group. Fix it by
properly handling the case with the profile flags.

Fixes: 265f7237dd25 ("btrfs: zoned: allow DUP on meta-data block groups")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/zoned.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/fs/btrfs/zoned.c
+++ b/fs/btrfs/zoned.c
@@ -2113,11 +2113,21 @@ bool btrfs_can_activate_zone(struct btrf
 		if (!device->bdev)
 			continue;
 
-		if (!zinfo->max_active_zones ||
-		    atomic_read(&zinfo->active_zones_left)) {
+		if (!zinfo->max_active_zones) {
 			ret = true;
 			break;
 		}
+
+		switch (flags & BTRFS_BLOCK_GROUP_PROFILE_MASK) {
+		case 0: /* single */
+			ret = (atomic_read(&zinfo->active_zones_left) >= 1);
+			break;
+		case BTRFS_BLOCK_GROUP_DUP:
+			ret = (atomic_read(&zinfo->active_zones_left) >= 2);
+			break;
+		}
+		if (ret)
+			break;
 	}
 	mutex_unlock(&fs_info->chunk_mutex);
 

[PATCH 6.1 165/224] Bluetooth: Fix race condition in hci_cmd_sync_clear

[Greg Kroah-Hartman]

From: Min Li <lm0963hack@gmail.com>

commit 1c66bee492a5fe00ae3fe890bb693bfc99f994c6 upstream.

There is a potential race condition in hci_cmd_sync_work and
hci_cmd_sync_clear, and could lead to use-after-free. For instance,
hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync
The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and
causing kernel panic when it is used in 'hci_cmd_sync_work'.

Here's the call trace:

dump_stack_lvl+0x49/0x63
print_report.cold+0x5e/0x5d3
? hci_cmd_sync_work+0x282/0x320
kasan_report+0xaa/0x120
? hci_cmd_sync_work+0x282/0x320
__asan_report_load8_noabort+0x14/0x20
hci_cmd_sync_work+0x282/0x320
process_one_work+0x77b/0x11c0
? _raw_spin_lock_irq+0x8e/0xf0
worker_thread+0x544/0x1180
? poll_idle+0x1e0/0x1e0
kthread+0x285/0x320
? process_one_work+0x11c0/0x11c0
? kthread_complete_and_exit+0x30/0x30
ret_from_fork+0x22/0x30
</TASK>

Allocated by task 266:
kasan_save_stack+0x26/0x50
__kasan_kmalloc+0xae/0xe0
kmem_cache_alloc_trace+0x191/0x350
hci_cmd_sync_queue+0x97/0x2b0
hci_update_passive_scan+0x176/0x1d0
le_conn_complete_evt+0x1b5/0x1a00
hci_le_conn_complete_evt+0x234/0x340
hci_le_meta_evt+0x231/0x4e0
hci_event_packet+0x4c5/0xf00
hci_rx_work+0x37d/0x880
process_one_work+0x77b/0x11c0
worker_thread+0x544/0x1180
kthread+0x285/0x320
ret_from_fork+0x22/0x30

Freed by task 269:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_set_free_info+0x24/0x40
____kasan_slab_free+0x176/0x1c0
__kasan_slab_free+0x12/0x20
slab_free_freelist_hook+0x95/0x1a0
kfree+0xba/0x2f0
hci_cmd_sync_clear+0x14c/0x210
hci_unregister_dev+0xff/0x440
vhci_release+0x7b/0xf0
__fput+0x1f3/0x970
____fput+0xe/0x20
task_work_run+0xd4/0x160
do_exit+0x8b0/0x22a0
do_group_exit+0xba/0x2a0
get_signal+0x1e4a/0x25b0
arch_do_signal_or_restart+0x93/0x1f80
exit_to_user_mode_prepare+0xf5/0x1a0
syscall_exit_to_user_mode+0x26/0x50
ret_from_fork+0x15/0x30

Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution")
Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/hci_sync.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -643,6 +643,7 @@ void hci_cmd_sync_clear(struct hci_dev *
 	cancel_work_sync(&hdev->cmd_sync_work);
 	cancel_work_sync(&hdev->reenable_adv_work);
 
+	mutex_lock(&hdev->cmd_sync_work_lock);
 	list_for_each_entry_safe(entry, tmp, &hdev->cmd_sync_work_list, list) {
 		if (entry->destroy)
 			entry->destroy(hdev, entry->data, -ECANCELED);
@@ -650,6 +651,7 @@ void hci_cmd_sync_clear(struct hci_dev *
 		list_del(&entry->list);
 		kfree(entry);
 	}
+	mutex_unlock(&hdev->cmd_sync_work_lock);
 }
 
 void __hci_cmd_sync_cancel(struct hci_dev *hdev, int err)

[PATCH 6.1 166/224] efi: sysfb_efi: Fix DMI quirks not working for simpledrm

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit 3615c78673c332b69aaacefbcde5937c5c706686 upstream.

Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init()
from before the [sysfb_]parse_mode() call to after it.
But sysfb_apply_efi_quirks() modifies the global screen_info struct which
[sysfb_]parse_mode() parses, so doing it later is too late.

This has broken all DMI based quirks for correcting wrong firmware efifb
settings when simpledrm is used.

To fix this move the sysfb_apply_efi_quirks() call back to its old place
and split the new setup of the efifb_fwnode (which requires
the platform_device) into its own function and call that at
the place of the moved sysfb_apply_efi_quirks(pd) calls.

Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Cc: stable@vger.kernel.org
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/efi/sysfb_efi.c  |    5 ++++-
 drivers/firmware/sysfb.c          |    4 +++-
 drivers/firmware/sysfb_simplefb.c |    2 +-
 include/linux/sysfb.h             |    9 +++++++--
 4 files changed, 15 insertions(+), 5 deletions(-)

--- a/drivers/firmware/efi/sysfb_efi.c
+++ b/drivers/firmware/efi/sysfb_efi.c
@@ -341,7 +341,7 @@ static const struct fwnode_operations ef
 #ifdef CONFIG_EFI
 static struct fwnode_handle efifb_fwnode;
 
-__init void sysfb_apply_efi_quirks(struct platform_device *pd)
+__init void sysfb_apply_efi_quirks(void)
 {
 	if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI ||
 	    !(screen_info.capabilities & VIDEO_CAPABILITY_SKIP_QUIRKS))
@@ -355,7 +355,10 @@ __init void sysfb_apply_efi_quirks(struc
 		screen_info.lfb_height = temp;
 		screen_info.lfb_linelength = 4 * screen_info.lfb_width;
 	}
+}
 
+__init void sysfb_set_efifb_fwnode(struct platform_device *pd)
+{
 	if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI && IS_ENABLED(CONFIG_PCI)) {
 		fwnode_init(&efifb_fwnode, &efifb_fwnode_ops);
 		pd->dev.fwnode = &efifb_fwnode;
--- a/drivers/firmware/sysfb.c
+++ b/drivers/firmware/sysfb.c
@@ -81,6 +81,8 @@ static __init int sysfb_init(void)
 	if (disabled)
 		goto unlock_mutex;
 
+	sysfb_apply_efi_quirks();
+
 	/* try to create a simple-framebuffer device */
 	compatible = sysfb_parse_mode(si, &mode);
 	if (compatible) {
@@ -107,7 +109,7 @@ static __init int sysfb_init(void)
 		goto unlock_mutex;
 	}
 
-	sysfb_apply_efi_quirks(pd);
+	sysfb_set_efifb_fwnode(pd);
 
 	ret = platform_device_add_data(pd, si, sizeof(*si));
 	if (ret)
--- a/drivers/firmware/sysfb_simplefb.c
+++ b/drivers/firmware/sysfb_simplefb.c
@@ -110,7 +110,7 @@ __init struct platform_device *sysfb_cre
 	if (!pd)
 		return ERR_PTR(-ENOMEM);
 
-	sysfb_apply_efi_quirks(pd);
+	sysfb_set_efifb_fwnode(pd);
 
 	ret = platform_device_add_resources(pd, &res, 1);
 	if (ret)
--- a/include/linux/sysfb.h
+++ b/include/linux/sysfb.h
@@ -70,11 +70,16 @@ static inline void sysfb_disable(void)
 #ifdef CONFIG_EFI
 
 extern struct efifb_dmi_info efifb_dmi_list[];
-void sysfb_apply_efi_quirks(struct platform_device *pd);
+void sysfb_apply_efi_quirks(void);
+void sysfb_set_efifb_fwnode(struct platform_device *pd);
 
 #else /* CONFIG_EFI */
 
-static inline void sysfb_apply_efi_quirks(struct platform_device *pd)
+static inline void sysfb_apply_efi_quirks(void)
+{
+}
+
+static inline void sysfb_set_efifb_fwnode(struct platform_device *pd)
 {
 }
 

[PATCH 6.1 167/224] mm/slab: Fix undefined init_cache_node_node() for NUMA and !SMP

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

commit 66a1c22b709178e7b823d44465d0c2e5ed7492fb upstream.

sh/migor_defconfig:

    mm/slab.c: In function ‘slab_memory_callback’:
    mm/slab.c:1127:23: error: implicit declaration of function ‘init_cache_node_node’; did you mean ‘drain_cache_node_node’? [-Werror=implicit-function-declaration]
     1127 |                 ret = init_cache_node_node(nid);
	  |                       ^~~~~~~~~~~~~~~~~~~~
	  |                       drain_cache_node_node

The #ifdef condition protecting the definition of init_cache_node_node()
no longer matches the conditions protecting the (multiple) users.

Fix this by syncing the conditions.

Fixes: 76af6a054da40553 ("mm/migrate: add CPU hotplug to demotion #ifdef")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/b5bdea22-ed2f-3187-6efe-0c72330270a4@infradead.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/slab.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/slab.c
+++ b/mm/slab.c
@@ -840,7 +840,7 @@ static int init_cache_node(struct kmem_c
 	return 0;
 }
 
-#if (defined(CONFIG_NUMA) && defined(CONFIG_MEMORY_HOTPLUG)) || defined(CONFIG_SMP)
+#if defined(CONFIG_NUMA) || defined(CONFIG_SMP)
 /*
  * Allocates and initializes node for a node on each slab cache, used for
  * either memory or cpu hotplug.  If memory is being hot-added, the kmem_cache_node

[PATCH 6.1 168/224] fscrypt: destroy keyring after security_sb_delete()

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit ccb820dc7d2236b1af0d54ae038a27b5b6d5ae5a upstream.

fscrypt_destroy_keyring() must be called after all potentially-encrypted
inodes were evicted; otherwise it cannot safely destroy the keyring.
Since inodes that are in-use by the Landlock LSM don't get evicted until
security_sb_delete(), this means that fscrypt_destroy_keyring() must be
called *after* security_sb_delete().

This fixes a WARN_ON followed by a NULL dereference, only possible if
Landlock was being used on encrypted files.

Fixes: d7e7b9af104c ("fscrypt: stop using keyrings subsystem for fscrypt_master_key")
Cc: stable@vger.kernel.org
Reported-by: syzbot+93e495f6a4f748827c88@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/00000000000044651705f6ca1e30@google.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230313221231.272498-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/super.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/fs/super.c
+++ b/fs/super.c
@@ -476,13 +476,22 @@ void generic_shutdown_super(struct super
 
 		cgroup_writeback_umount();
 
-		/* evict all inodes with zero refcount */
+		/* Evict all inodes with zero refcount. */
 		evict_inodes(sb);
-		/* only nonzero refcount inodes can have marks */
+
+		/*
+		 * Clean up and evict any inodes that still have references due
+		 * to fsnotify or the security policy.
+		 */
 		fsnotify_sb_delete(sb);
-		fscrypt_destroy_keyring(sb);
 		security_sb_delete(sb);
 
+		/*
+		 * Now that all potentially-encrypted inodes have been evicted,
+		 * the fscrypt keyring can be destroyed.
+		 */
+		fscrypt_destroy_keyring(sb);
+
 		if (sb->s_dio_done_wq) {
 			destroy_workqueue(sb->s_dio_done_wq);
 			sb->s_dio_done_wq = NULL;

[PATCH 6.1 169/224] fsverity: Remove WQ_UNBOUND from fsverity read workqueue

[Greg Kroah-Hartman]

From: Nathan Huckleberry <nhuck@google.com>

commit f959325e6ac3f499450088b8d9c626d1177be160 upstream.

WQ_UNBOUND causes significant scheduler latency on ARM64/Android.  This
is problematic for latency sensitive workloads, like I/O
post-processing.

Removing WQ_UNBOUND gives a 96% reduction in fsverity workqueue related
scheduler latency and improves app cold startup times by ~30ms.
WQ_UNBOUND was also removed from the dm-verity workqueue for the same
reason [1].

This code was tested by running Android app startup benchmarks and
measuring how long the fsverity workqueue spent in the runnable state.

Before
Total workqueue scheduler latency: 553800us
After
Total workqueue scheduler latency: 18962us

[1]: https://lore.kernel.org/all/20230202012348.885402-1-nhuck@google.com/

Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Fixes: 8a1d0f9cacc9 ("fs-verity: add data verification hooks for ->readpages()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230310193325.620493-1-nhuck@google.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/verity/verify.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/fs/verity/verify.c
+++ b/fs/verity/verify.c
@@ -269,15 +269,15 @@ EXPORT_SYMBOL_GPL(fsverity_enqueue_verif
 int __init fsverity_init_workqueue(void)
 {
 	/*
-	 * Use an unbound workqueue to allow bios to be verified in parallel
-	 * even when they happen to complete on the same CPU.  This sacrifices
-	 * locality, but it's worthwhile since hashing is CPU-intensive.
+	 * Use a high-priority workqueue to prioritize verification work, which
+	 * blocks reads from completing, over regular application tasks.
 	 *
-	 * Also use a high-priority workqueue to prioritize verification work,
-	 * which blocks reads from completing, over regular application tasks.
+	 * For performance reasons, don't use an unbound workqueue.  Using an
+	 * unbound workqueue for crypto operations causes excessive scheduler
+	 * latency on ARM64.
 	 */
 	fsverity_read_workqueue = alloc_workqueue("fsverity_read_queue",
-						  WQ_UNBOUND | WQ_HIGHPRI,
+						  WQ_HIGHPRI,
 						  num_online_cpus());
 	if (!fsverity_read_workqueue)
 		return -ENOMEM;

[PATCH 6.1 170/224] lockd: set file_lock start and end when decoding nlm4 testargs

[Greg Kroah-Hartman]

From: Jeff Layton <jlayton@kernel.org>

commit 7ff84910c66c9144cc0de9d9deed9fb84c03aff0 upstream.

Commit 6930bcbfb6ce dropped the setting of the file_lock range when
decoding a nlm_lock off the wire. This causes the client side grant
callback to miss matching blocks and reject the lock, only to rerequest
it 30s later.

Add a helper function to set the file_lock range from the start and end
values that the protocol uses, and have the nlm_lock decoder call that to
set up the file_lock args properly.

Fixes: 6930bcbfb6ce ("lockd: detect and reject lock arguments that overflow")
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org #6.0
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/lockd/clnt4xdr.c        |    9 +--------
 fs/lockd/xdr4.c            |   13 ++++++++++++-
 include/linux/lockd/xdr4.h |    1 +
 3 files changed, 14 insertions(+), 9 deletions(-)

--- a/fs/lockd/clnt4xdr.c
+++ b/fs/lockd/clnt4xdr.c
@@ -261,7 +261,6 @@ static int decode_nlm4_holder(struct xdr
 	u32 exclusive;
 	int error;
 	__be32 *p;
-	s32 end;
 
 	memset(lock, 0, sizeof(*lock));
 	locks_init_lock(fl);
@@ -285,13 +284,7 @@ static int decode_nlm4_holder(struct xdr
 	fl->fl_type  = exclusive != 0 ? F_WRLCK : F_RDLCK;
 	p = xdr_decode_hyper(p, &l_offset);
 	xdr_decode_hyper(p, &l_len);
-	end = l_offset + l_len - 1;
-
-	fl->fl_start = (loff_t)l_offset;
-	if (l_len == 0 || end < 0)
-		fl->fl_end = OFFSET_MAX;
-	else
-		fl->fl_end = (loff_t)end;
+	nlm4svc_set_file_lock_range(fl, l_offset, l_len);
 	error = 0;
 out:
 	return error;
--- a/fs/lockd/xdr4.c
+++ b/fs/lockd/xdr4.c
@@ -33,6 +33,17 @@ loff_t_to_s64(loff_t offset)
 	return res;
 }
 
+void nlm4svc_set_file_lock_range(struct file_lock *fl, u64 off, u64 len)
+{
+	s64 end = off + len - 1;
+
+	fl->fl_start = off;
+	if (len == 0 || end < 0)
+		fl->fl_end = OFFSET_MAX;
+	else
+		fl->fl_end = end;
+}
+
 /*
  * NLM file handles are defined by specification to be a variable-length
  * XDR opaque no longer than 1024 bytes. However, this implementation
@@ -80,7 +91,7 @@ svcxdr_decode_lock(struct xdr_stream *xd
 	locks_init_lock(fl);
 	fl->fl_flags = FL_POSIX;
 	fl->fl_type  = F_RDLCK;
-
+	nlm4svc_set_file_lock_range(fl, lock->lock_start, lock->lock_len);
 	return true;
 }
 
--- a/include/linux/lockd/xdr4.h
+++ b/include/linux/lockd/xdr4.h
@@ -22,6 +22,7 @@
 #define	nlm4_fbig		cpu_to_be32(NLM_FBIG)
 #define	nlm4_failed		cpu_to_be32(NLM_FAILED)
 
+void	nlm4svc_set_file_lock_range(struct file_lock *fl, u64 off, u64 len);
 bool	nlm4svc_decode_void(struct svc_rqst *rqstp, struct xdr_stream *xdr);
 bool	nlm4svc_decode_testargs(struct svc_rqst *rqstp, struct xdr_stream *xdr);
 bool	nlm4svc_decode_lockargs(struct svc_rqst *rqstp, struct xdr_stream *xdr);

[PATCH 6.1 171/224] arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit 32f86da7c86b27ebed31c24453a0713f612e43fb upstream.

The WM8960 Linux driver expects the clock to be named "mclk".  Otherwise
the clock will be ignored and not prepared/enabled by the driver.

Fixes: 40ba2eda0a7b ("arm64: dts: imx8mm-nitrogen-r2: add audio")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -247,7 +247,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&clk IMX8MM_CLK_SAI1_ROOT>;
-		clock-names = "mclk1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};

[PATCH 6.1 172/224] igb: revert rtnl_lock() that causes deadlock

[Greg Kroah-Hartman]

From: Lin Ma <linma@zju.edu.cn>

commit 65f69851e44d71248b952a687e44759a7abb5016 upstream.

The commit 6faee3d4ee8b ("igb: Add lock to avoid data race") adds
rtnl_lock to eliminate a false data race shown below

 (FREE from device detaching)      |   (USE from netdev core)
igb_remove                         |  igb_ndo_get_vf_config
 igb_disable_sriov                 |  vf >= adapter->vfs_allocated_count?
  kfree(adapter->vf_data)          |
  adapter->vfs_allocated_count = 0 |
                                   |    memcpy(... adapter->vf_data[vf]

The above race will never happen and the extra rtnl_lock causes deadlock
below

[  141.420169]  <TASK>
[  141.420672]  __schedule+0x2dd/0x840
[  141.421427]  schedule+0x50/0xc0
[  141.422041]  schedule_preempt_disabled+0x11/0x20
[  141.422678]  __mutex_lock.isra.13+0x431/0x6b0
[  141.423324]  unregister_netdev+0xe/0x20
[  141.423578]  igbvf_remove+0x45/0xe0 [igbvf]
[  141.423791]  pci_device_remove+0x36/0xb0
[  141.423990]  device_release_driver_internal+0xc1/0x160
[  141.424270]  pci_stop_bus_device+0x6d/0x90
[  141.424507]  pci_stop_and_remove_bus_device+0xe/0x20
[  141.424789]  pci_iov_remove_virtfn+0xba/0x120
[  141.425452]  sriov_disable+0x2f/0xf0
[  141.425679]  igb_disable_sriov+0x4e/0x100 [igb]
[  141.426353]  igb_remove+0xa0/0x130 [igb]
[  141.426599]  pci_device_remove+0x36/0xb0
[  141.426796]  device_release_driver_internal+0xc1/0x160
[  141.427060]  driver_detach+0x44/0x90
[  141.427253]  bus_remove_driver+0x55/0xe0
[  141.427477]  pci_unregister_driver+0x2a/0xa0
[  141.428296]  __x64_sys_delete_module+0x141/0x2b0
[  141.429126]  ? mntput_no_expire+0x4a/0x240
[  141.429363]  ? syscall_trace_enter.isra.19+0x126/0x1a0
[  141.429653]  do_syscall_64+0x5b/0x80
[  141.429847]  ? exit_to_user_mode_prepare+0x14d/0x1c0
[  141.430109]  ? syscall_exit_to_user_mode+0x12/0x30
[  141.430849]  ? do_syscall_64+0x67/0x80
[  141.431083]  ? syscall_exit_to_user_mode_prepare+0x183/0x1b0
[  141.431770]  ? syscall_exit_to_user_mode+0x12/0x30
[  141.432482]  ? do_syscall_64+0x67/0x80
[  141.432714]  ? exc_page_fault+0x64/0x140
[  141.432911]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

Since the igb_disable_sriov() will call pci_disable_sriov() before
releasing any resources, the netdev core will synchronize the cleanup to
avoid any races. This patch removes the useless rtnl_(un)lock to guarantee
correctness.

CC: stable@vger.kernel.org
Fixes: 6faee3d4ee8b ("igb: Add lock to avoid data race")
Reported-by: Corinna Vinschen <vinschen@redhat.com>
Link: https://lore.kernel.org/intel-wired-lan/ZAcJvkEPqWeJHO2r@calimero.vinschen.de/
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3841,9 +3841,7 @@ static void igb_remove(struct pci_dev *p
 	igb_release_hw_control(adapter);
 
 #ifdef CONFIG_PCI_IOV
-	rtnl_lock();
 	igb_disable_sriov(pdev);
-	rtnl_unlock();
 #endif
 
 	unregister_netdev(netdev);

[PATCH 6.1 173/224] dm thin: fix deadlock when swapping to thin device

[Greg Kroah-Hartman]

From: Coly Li <colyli@suse.de>

commit 9bbf5feecc7eab2c370496c1c161bbfe62084028 upstream.

This is an already known issue that dm-thin volume cannot be used as
swap, otherwise a deadlock may happen when dm-thin internal memory
demand triggers swap I/O on the dm-thin volume itself.

But thanks to commit a666e5c05e7c ("dm: fix deadlock when swapping to
encrypted device"), the limit_swap_bios target flag can also be used
for dm-thin to avoid the recursive I/O when it is used as swap.

Fix is to simply set ti->limit_swap_bios to true in both pool_ctr()
and thin_ctr().

In my test, I create a dm-thin volume /dev/vg/swap and use it as swap
device. Then I run fio on another dm-thin volume /dev/vg/main and use
large --blocksize to trigger swap I/O onto /dev/vg/swap.

The following fio command line is used in my test,
  fio --name recursive-swap-io --lockmem 1 --iodepth 128 \
     --ioengine libaio --filename /dev/vg/main --rw randrw \
    --blocksize 1M --numjobs 32 --time_based --runtime=12h

Without this fix, the whole system can be locked up within 15 seconds.

With this fix, there is no any deadlock or hung task observed after
2 hours of running fio.

Furthermore, if blocksize is changed from 1M to 128M, after around 30
seconds fio has no visible I/O, and the out-of-memory killer message
shows up in kernel message. After around 20 minutes all fio processes
are killed and the whole system is back to being alive.

This is exactly what is expected when recursive I/O happens on dm-thin
volume when it is used as swap.

Depends-on: a666e5c05e7c ("dm: fix deadlock when swapping to encrypted device")
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-thin.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -3357,6 +3357,7 @@ static int pool_ctr(struct dm_target *ti
 	pt->low_water_blocks = low_water_blocks;
 	pt->adjusted_pf = pt->requested_pf = pf;
 	ti->num_flush_bios = 1;
+	ti->limit_swap_bios = true;
 
 	/*
 	 * Only need to enable discards if the pool should pass
@@ -4235,6 +4236,7 @@ static int thin_ctr(struct dm_target *ti
 		goto bad;
 
 	ti->num_flush_bios = 1;
+	ti->limit_swap_bios = true;
 	ti->flush_supported = true;
 	ti->accounts_remapped_io = true;
 	ti->per_io_data_size = sizeof(struct dm_thin_endio_hook);

[PATCH 6.1 174/224] usb: typec: tcpm: fix create duplicate source-capabilities file

[Greg Kroah-Hartman]

From: Xu Yang <xu.yang_2@nxp.com>

commit a826492fc9dfe32afd70fff93955ae8174bbf14b upstream.

The kernel will dump in the below cases:
sysfs: cannot create duplicate filename
'/devices/virtual/usb_power_delivery/pd1/source-capabilities'

1. After soft reset has completed, an Explicit Contract negotiation occurs.
The sink device will receive source capabilitys again. This will cause
a duplicate source-capabilities file be created.
2. Power swap twice on a device that is initailly sink role.

This will unregister existing capabilities when above cases occurs.

Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230215054951.238394-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/tcpm/tcpm.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -4547,6 +4547,9 @@ static void run_state_machine(struct tcp
 	case SOFT_RESET:
 		port->message_id = 0;
 		port->rx_msgid = -1;
+		/* remove existing capabilities */
+		usb_power_delivery_unregister_capabilities(port->partner_source_caps);
+		port->partner_source_caps = NULL;
 		tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
 		tcpm_ams_finish(port);
 		if (port->pwr_role == TYPEC_SOURCE) {
@@ -4566,6 +4569,9 @@ static void run_state_machine(struct tcp
 	case SOFT_RESET_SEND:
 		port->message_id = 0;
 		port->rx_msgid = -1;
+		/* remove existing capabilities */
+		usb_power_delivery_unregister_capabilities(port->partner_source_caps);
+		port->partner_source_caps = NULL;
 		if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET))
 			tcpm_set_state_cond(port, hard_reset_state(port), 0);
 		else
@@ -4695,6 +4701,9 @@ static void run_state_machine(struct tcp
 		tcpm_set_state(port, SNK_STARTUP, 0);
 		break;
 	case PR_SWAP_SNK_SRC_SINK_OFF:
+		/* will be source, remove existing capabilities */
+		usb_power_delivery_unregister_capabilities(port->partner_source_caps);
+		port->partner_source_caps = NULL;
 		/*
 		 * Prevent vbus discharge circuit from turning on during PR_SWAP
 		 * as this is not a disconnect.

[PATCH 6.1 175/224] usb: typec: tcpm: fix warning when handle discover_identity message

[Greg Kroah-Hartman]

From: Xu Yang <xu.yang_2@nxp.com>

commit abfc4fa28f0160df61c7149567da4f6494dfb488 upstream.

Since both source and sink device can send discover_identity message in
PD3, kernel may dump below warning:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 169 at drivers/usb/typec/tcpm/tcpm.c:1446 tcpm_queue_vdm+0xe0/0xf0
Modules linked in:
CPU: 0 PID: 169 Comm: 1-0050 Not tainted 6.1.1-00038-g6a3c36cf1da2-dirty #567
Hardware name: NXP i.MX8MPlus EVK board (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : tcpm_queue_vdm+0xe0/0xf0
lr : tcpm_queue_vdm+0x2c/0xf0
sp : ffff80000c19bcd0
x29: ffff80000c19bcd0 x28: 0000000000000001 x27: ffff0000d11c8ab8
x26: ffff0000d11cc000 x25: 0000000000000000 x24: 00000000ff008081
x23: 0000000000000001 x22: 00000000ff00a081 x21: ffff80000c19bdbc
x20: 0000000000000000 x19: ffff0000d11c8080 x18: ffffffffffffffff
x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000d716f580
x14: 0000000000000001 x13: ffff0000d716f507 x12: 0000000000000001
x11: 0000000000000000 x10: 0000000000000020 x9 : 00000000000ee098
x8 : 00000000ffffffff x7 : 000000000000001c x6 : ffff0000d716f580
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff80000c19bdbc x1 : 00000000ff00a081 x0 : 0000000000000004
Call trace:
tcpm_queue_vdm+0xe0/0xf0
tcpm_pd_rx_handler+0x340/0x1ab0
kthread_worker_fn+0xcc/0x18c
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---

Below sequences may trigger this warning:

tcpm_send_discover_work(work)
  tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0);
   tcpm_queue_vdm(port, header, data, count);
    port->vdm_state = VDM_STATE_READY;

vdm_state_machine_work(work);
			<-- received discover_identity from partner
 vdm_run_state_machine(port);
  port->vdm_state = VDM_STATE_SEND_MESSAGE;
   mod_vdm_delayed_work(port, x);

tcpm_pd_rx_handler(work);
 tcpm_pd_data_request(port, msg);
  tcpm_handle_vdm_request(port, msg->payload, cnt);
   tcpm_queue_vdm(port, response[0], &response[1], rlen - 1);
--> WARN_ON(port->vdm_state > VDM_STATE_DONE);

For this case, the state machine could still send out discover
identity message later if we skip current discover_identity message.
So we should handle the received message firstly and override the pending
discover_identity message without warning in this case. Then, a delayed
send_discover work will send discover_identity message again.

Fixes: e00943e91678 ("usb: typec: tcpm: PD3.0 sinks can send Discover Identity even in device mode")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230216031515.4151117-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/tcpm/tcpm.c |   19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -1436,10 +1436,18 @@ static int tcpm_ams_start(struct tcpm_po
 static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header,
 			   const u32 *data, int cnt)
 {
+	u32 vdo_hdr = port->vdo_data[0];
+
 	WARN_ON(!mutex_is_locked(&port->lock));
 
-	/* Make sure we are not still processing a previous VDM packet */
-	WARN_ON(port->vdm_state > VDM_STATE_DONE);
+	/* If is sending discover_identity, handle received message first */
+	if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMD(vdo_hdr) == CMD_DISCOVER_IDENT) {
+		port->send_discover = true;
+		mod_send_discover_delayed_work(port, SEND_DISCOVER_RETRY_MS);
+	} else {
+		/* Make sure we are not still processing a previous VDM packet */
+		WARN_ON(port->vdm_state > VDM_STATE_DONE);
+	}
 
 	port->vdo_count = cnt + 1;
 	port->vdo_data[0] = header;
@@ -1942,11 +1950,13 @@ static void vdm_run_state_machine(struct
 			switch (PD_VDO_CMD(vdo_hdr)) {
 			case CMD_DISCOVER_IDENT:
 				res = tcpm_ams_start(port, DISCOVER_IDENTITY);
-				if (res == 0)
+				if (res == 0) {
 					port->send_discover = false;
-				else if (res == -EAGAIN)
+				} else if (res == -EAGAIN) {
+					port->vdo_data[0] = 0;
 					mod_send_discover_delayed_work(port,
 								       SEND_DISCOVER_RETRY_MS);
+				}
 				break;
 			case CMD_DISCOVER_SVID:
 				res = tcpm_ams_start(port, DISCOVER_SVIDS);
@@ -2029,6 +2039,7 @@ static void vdm_run_state_machine(struct
 			unsigned long timeout;
 
 			port->vdm_retries = 0;
+			port->vdo_data[0] = 0;
 			port->vdm_state = VDM_STATE_BUSY;
 			timeout = vdm_ready_timeout(vdo_hdr);
 			mod_vdm_delayed_work(port, timeout);

[PATCH 6.1 176/224] usb: cdns3: Fix issue with using incorrect PCI device function

[Greg Kroah-Hartman]

From: Pawel Laszczak <pawell@cadence.com>

commit 1272fd652a226ccb34e9f47371b6121948048438 upstream.

PCI based platform can have more than two PCI functions.
USBSS PCI Glue driver during initialization should
consider only DRD/HOST/DEVICE PCI functions and
all other should be ignored. This patch adds additional
condition which causes that only DRD and HOST/DEVICE
function will be accepted.

cc: <stable@vger.kernel.org>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20230308124427.311245-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/cdns3/cdns3-pci-wrap.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/cdns3/cdns3-pci-wrap.c
+++ b/drivers/usb/cdns3/cdns3-pci-wrap.c
@@ -60,6 +60,11 @@ static struct pci_dev *cdns3_get_second_
 			return NULL;
 	}
 
+	if (func->devfn != PCI_DEV_FN_HOST_DEVICE &&
+	    func->devfn != PCI_DEV_FN_OTG) {
+		return NULL;
+	}
+
 	return func;
 }
 

[PATCH 6.1 177/224] usb: cdnsp: Fixes issue with redundant Status Stage

[Greg Kroah-Hartman]

From: Pawel Laszczak <pawell@cadence.com>

commit 5bc38d33a5a1209fd4de65101d1ae8255ea12c6e upstream.

In some cases, driver trees to send Status Stage twice.
The first one from upper layer of gadget usb subsystem and
second time from controller driver.
This patch fixes this issue and remove tricky handling of
SET_INTERFACE from controller driver which is no longer
needed.

cc: <stable@vger.kernel.org>
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20230307111420.376056-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/cdns3/cdnsp-ep0.c |   19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

--- a/drivers/usb/cdns3/cdnsp-ep0.c
+++ b/drivers/usb/cdns3/cdnsp-ep0.c
@@ -403,20 +403,6 @@ static int cdnsp_ep0_std_request(struct
 	case USB_REQ_SET_ISOCH_DELAY:
 		ret = cdnsp_ep0_set_isoch_delay(pdev, ctrl);
 		break;
-	case USB_REQ_SET_INTERFACE:
-		/*
-		 * Add request into pending list to block sending status stage
-		 * by libcomposite.
-		 */
-		list_add_tail(&pdev->ep0_preq.list,
-			      &pdev->ep0_preq.pep->pending_list);
-
-		ret = cdnsp_ep0_delegate_req(pdev, ctrl);
-		if (ret == -EBUSY)
-			ret = 0;
-
-		list_del(&pdev->ep0_preq.list);
-		break;
 	default:
 		ret = cdnsp_ep0_delegate_req(pdev, ctrl);
 		break;
@@ -474,9 +460,6 @@ void cdnsp_setup_analyze(struct cdnsp_de
 	else
 		ret = cdnsp_ep0_delegate_req(pdev, ctrl);
 
-	if (!len)
-		pdev->ep0_stage = CDNSP_STATUS_STAGE;
-
 	if (ret == USB_GADGET_DELAYED_STATUS) {
 		trace_cdnsp_ep0_status_stage("delayed");
 		return;
@@ -484,6 +467,6 @@ void cdnsp_setup_analyze(struct cdnsp_de
 out:
 	if (ret < 0)
 		cdnsp_ep0_stall(pdev);
-	else if (pdev->ep0_stage == CDNSP_STATUS_STAGE)
+	else if (!len && pdev->ep0_stage != CDNSP_STATUS_STAGE)
 		cdnsp_status_stage(pdev);
 }

[PATCH 6.1 178/224] usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver

[Greg Kroah-Hartman]

From: Pawel Laszczak <pawell@cadence.com>

commit 96b96b2a567fb34dd41c87e6cf01f6902ce8cae4 upstream.

Patch changes CDNS_DEVICE_ID in USBSSP PCI Glue driver to remove
the conflict with Cadence USBSS driver.

cc: <stable@vger.kernel.org>
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20230309063048.299378-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/cdns3/cdnsp-pci.c |   27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)

--- a/drivers/usb/cdns3/cdnsp-pci.c
+++ b/drivers/usb/cdns3/cdnsp-pci.c
@@ -29,30 +29,23 @@
 #define PLAT_DRIVER_NAME	"cdns-usbssp"
 
 #define CDNS_VENDOR_ID		0x17cd
-#define CDNS_DEVICE_ID		0x0100
+#define CDNS_DEVICE_ID		0x0200
+#define CDNS_DRD_ID		0x0100
 #define CDNS_DRD_IF		(PCI_CLASS_SERIAL_USB << 8 | 0x80)
 
 static struct pci_dev *cdnsp_get_second_fun(struct pci_dev *pdev)
 {
-	struct pci_dev *func;
-
 	/*
 	 * Gets the second function.
-	 * It's little tricky, but this platform has two function.
-	 * The fist keeps resources for Host/Device while the second
-	 * keeps resources for DRD/OTG.
+	 * Platform has two function. The fist keeps resources for
+	 * Host/Device while the secon keeps resources for DRD/OTG.
 	 */
-	func = pci_get_device(pdev->vendor, pdev->device, NULL);
-	if (!func)
-		return NULL;
+	if (pdev->device == CDNS_DEVICE_ID)
+		return  pci_get_device(pdev->vendor, CDNS_DRD_ID, NULL);
+	else if (pdev->device == CDNS_DRD_ID)
+		return pci_get_device(pdev->vendor, CDNS_DEVICE_ID, NULL);
 
-	if (func->devfn == pdev->devfn) {
-		func = pci_get_device(pdev->vendor, pdev->device, func);
-		if (!func)
-			return NULL;
-	}
-
-	return func;
+	return NULL;
 }
 
 static int cdnsp_pci_probe(struct pci_dev *pdev,
@@ -232,6 +225,8 @@ static const struct pci_device_id cdnsp_
 	  PCI_CLASS_SERIAL_USB_DEVICE, PCI_ANY_ID },
 	{ PCI_VENDOR_ID_CDNS, CDNS_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  CDNS_DRD_IF, PCI_ANY_ID },
+	{ PCI_VENDOR_ID_CDNS, CDNS_DRD_ID, PCI_ANY_ID, PCI_ANY_ID,
+	  CDNS_DRD_IF, PCI_ANY_ID },
 	{ 0, }
 };
 

[PATCH 6.1 179/224] usb: chipdea: core: fix return -EINVAL if request role is the same with current role

[Greg Kroah-Hartman]

From: Xu Yang <xu.yang_2@nxp.com>

commit 3670de80678961eda7fa2220883fc77c16868951 upstream.

It should not return -EINVAL if the request role is the same with current
role, return non-error and without do anything instead.

Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230317061516.2451728-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/core.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -977,9 +977,12 @@ static ssize_t role_store(struct device
 			     strlen(ci->roles[role]->name)))
 			break;
 
-	if (role == CI_ROLE_END || role == ci->role)
+	if (role == CI_ROLE_END)
 		return -EINVAL;
 
+	if (role == ci->role)
+		return n;
+
 	pm_runtime_get_sync(dev);
 	disable_irq(ci->irq);
 	ci_role_stop(ci);

[PATCH 6.1 180/224] usb: chipidea: core: fix possible concurrent when switch role

[Greg Kroah-Hartman]

From: Xu Yang <xu.yang_2@nxp.com>

commit 451b15ed138ec15bffbebb58a00ebdd884c3e659 upstream.

The user may call role_store() when driver is handling
ci_handle_id_switch() which is triggerred by otg event or power lost
event. Unfortunately, the controller may go into chaos in this case.
Fix this by protecting it with mutex lock.

Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230317061516.2451728-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci.h   |    2 ++
 drivers/usb/chipidea/core.c |    8 +++++++-
 drivers/usb/chipidea/otg.c  |    5 ++++-
 3 files changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -204,6 +204,7 @@ struct hw_bank {
  * @in_lpm: if the core in low power mode
  * @wakeup_int: if wakeup interrupt occur
  * @rev: The revision number for controller
+ * @mutex: protect code from concorrent running when doing role switch
  */
 struct ci_hdrc {
 	struct device			*dev;
@@ -256,6 +257,7 @@ struct ci_hdrc {
 	bool				in_lpm;
 	bool				wakeup_int;
 	enum ci_revision		rev;
+	struct mutex                    mutex;
 };
 
 static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -980,8 +980,12 @@ static ssize_t role_store(struct device
 	if (role == CI_ROLE_END)
 		return -EINVAL;
 
-	if (role == ci->role)
+	mutex_lock(&ci->mutex);
+
+	if (role == ci->role) {
+		mutex_unlock(&ci->mutex);
 		return n;
+	}
 
 	pm_runtime_get_sync(dev);
 	disable_irq(ci->irq);
@@ -991,6 +995,7 @@ static ssize_t role_store(struct device
 		ci_handle_vbus_change(ci);
 	enable_irq(ci->irq);
 	pm_runtime_put_sync(dev);
+	mutex_unlock(&ci->mutex);
 
 	return (ret == 0) ? n : ret;
 }
@@ -1026,6 +1031,7 @@ static int ci_hdrc_probe(struct platform
 		return -ENOMEM;
 
 	spin_lock_init(&ci->lock);
+	mutex_init(&ci->mutex);
 	ci->dev = dev;
 	ci->platdata = dev_get_platdata(dev);
 	ci->imx28_write_fix = !!(ci->platdata->flags &
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -167,8 +167,10 @@ static int hw_wait_vbus_lower_bsv(struct
 
 static void ci_handle_id_switch(struct ci_hdrc *ci)
 {
-	enum ci_role role = ci_otg_role(ci);
+	enum ci_role role;
 
+	mutex_lock(&ci->mutex);
+	role = ci_otg_role(ci);
 	if (role != ci->role) {
 		dev_dbg(ci->dev, "switching from %s to %s\n",
 			ci_role(ci)->name, ci->roles[role]->name);
@@ -198,6 +200,7 @@ static void ci_handle_id_switch(struct c
 		if (role == CI_ROLE_GADGET)
 			ci_handle_vbus_change(ci);
 	}
+	mutex_unlock(&ci->mutex);
 }
 /**
  * ci_otg_work - perform otg (vbus/id) event handle

[PATCH 6.1 181/224] usb: dwc3: gadget: Add 1ms delay after end transfer command without IOC

[Greg Kroah-Hartman]

From: Wesley Cheng <quic_wcheng@quicinc.com>

commit d8a2bb4eb75866275b5cf7de2e593ac3449643e2 upstream.

Previously, there was a 100uS delay inserted after issuing an end transfer
command for specific controller revisions.  This was due to the fact that
there was a GUCTL2 bit field which enabled synchronous completion of the
end transfer command once the CMDACT bit was cleared in the DEPCMD
register.  Since this bit does not exist for all controller revisions and
the current implementation heavily relies on utizling the EndTransfer
command completion interrupt, add the delay back in for uses where the
interrupt on completion bit is not set, and increase the duration to 1ms
for the controller to complete the command.

An issue was seen where the USB request buffer was unmapped while the DWC3
controller was still accessing the TRB.  However, it was confirmed that the
end transfer command was successfully submitted. (no end transfer timeout)
In situations, such as dwc3_gadget_soft_disconnect() and
__dwc3_gadget_ep_disable(), the dwc3_remove_request() is utilized, which
will issue the end transfer command, and follow up with
dwc3_gadget_giveback().  At least for the USB ep disable path, it is
required for any pending and started requests to be completed and returned
to the function driver in the same context of the disable call.  Without
the GUCTL2 bit, it is not ensured that the end transfer is completed before
the buffers are unmapped.

Fixes: cf2f8b63f7f1 ("usb: dwc3: gadget: Remove END_TRANSFER delay")
Cc: stable <stable@kernel.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230306200557.29387-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/gadget.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1689,6 +1689,7 @@ static int __dwc3_gadget_get_frame(struc
  */
 static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt)
 {
+	struct dwc3 *dwc = dep->dwc;
 	struct dwc3_gadget_ep_cmd_params params;
 	u32 cmd;
 	int ret;
@@ -1712,10 +1713,13 @@ static int __dwc3_stop_active_transfer(s
 	WARN_ON_ONCE(ret);
 	dep->resource_index = 0;
 
-	if (!interrupt)
+	if (!interrupt) {
+		if (!DWC3_IP_IS(DWC3) || DWC3_VER_IS_PRIOR(DWC3, 310A))
+			mdelay(1);
 		dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
-	else if (!ret)
+	} else if (!ret) {
 		dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
+	}
 
 	dep->flags &= ~DWC3_EP_DELAY_STOP;
 	return ret;
@@ -3764,7 +3768,11 @@ void dwc3_stop_active_transfer(struct dw
 	 * enabled, the EndTransfer command will have completed upon
 	 * returning from this function.
 	 *
-	 * This mode is NOT available on the DWC_usb31 IP.
+	 * This mode is NOT available on the DWC_usb31 IP.  In this
+	 * case, if the IOC bit is not set, then delay by 1ms
+	 * after issuing the EndTransfer command.  This allows for the
+	 * controller to handle the command completely before DWC3
+	 * remove requests attempts to unmap USB request buffers.
 	 */
 
 	__dwc3_stop_active_transfer(dep, force, interrupt);

[PATCH 6.1 182/224] usb: ucsi: Fix NULL pointer deref in ucsi_connector_change()

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit f87fb985452ab2083967103ac00bfd68fb182764 upstream.

When ucsi_init() fails, ucsi->connector is NULL, yet in case of
ucsi_acpi we may still get events which cause the ucs_acpi code to call
ucsi_connector_change(), which then derefs the NULL ucsi->connector
pointer.

Fix this by not setting ucsi->ntfy inside ucsi_init() until ucsi_init()
has succeeded, so that ucsi_connector_change() ignores the events
because UCSI_ENABLE_NTFY_CONNECTOR_CHANGE is not set in the ntfy mask.

Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217106
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230308154244.722337-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/ucsi/ucsi.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1205,7 +1205,7 @@ out_unlock:
 static int ucsi_init(struct ucsi *ucsi)
 {
 	struct ucsi_connector *con;
-	u64 command;
+	u64 command, ntfy;
 	int ret;
 	int i;
 
@@ -1217,8 +1217,8 @@ static int ucsi_init(struct ucsi *ucsi)
 	}
 
 	/* Enable basic notifications */
-	ucsi->ntfy = UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR;
-	command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy;
+	ntfy = UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR;
+	command = UCSI_SET_NOTIFICATION_ENABLE | ntfy;
 	ret = ucsi_send_command(ucsi, command, NULL, 0);
 	if (ret < 0)
 		goto err_reset;
@@ -1250,12 +1250,13 @@ static int ucsi_init(struct ucsi *ucsi)
 	}
 
 	/* Enable all notifications */
-	ucsi->ntfy = UCSI_ENABLE_NTFY_ALL;
-	command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy;
+	ntfy = UCSI_ENABLE_NTFY_ALL;
+	command = UCSI_SET_NOTIFICATION_ENABLE | ntfy;
 	ret = ucsi_send_command(ucsi, command, NULL, 0);
 	if (ret < 0)
 		goto err_unregister;
 
+	ucsi->ntfy = ntfy;
 	return 0;
 
 err_unregister:

[PATCH 6.1 183/224] usb: ucsi_acpi: Increase the command completion timeout

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit 02d210f434249a7edbc160969b75df030dc6934d upstream.

Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command
completion timeout value") increased the timeout from 5 seconds
to 60 seconds due to issues related to alternate mode discovery.

After the alternate mode discovery switch to polled mode
the timeout was reduced, but instead of being set back to
5 seconds it was reduced to 1 second.

This is causing problems when using a Lenovo ThinkPad X1 yoga gen7
connected over Type-C to a LG 27UL850-W (charging DP over Type-C).

When the monitor is already connected at boot the following error
is logged: "PPM init failed (-110)", /sys/class/typec is empty and
on unplugging the NULL pointer deref fixed earlier in this series
happens.

When the monitor is connected after boot the following error
is logged instead: "GET_CONNECTOR_STATUS failed (-110)".

Setting the timeout back to 5 seconds fixes both cases.

Fixes: e08065069fc7 ("usb: typec: ucsi: acpi: Reduce the command completion timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230308154244.722337-4-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/ucsi/ucsi_acpi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/typec/ucsi/ucsi_acpi.c
+++ b/drivers/usb/typec/ucsi/ucsi_acpi.c
@@ -78,7 +78,7 @@ static int ucsi_acpi_sync_write(struct u
 	if (ret)
 		goto out_clear_bit;
 
-	if (!wait_for_completion_timeout(&ua->complete, HZ))
+	if (!wait_for_completion_timeout(&ua->complete, 5 * HZ))
 		ret = -ETIMEDOUT;
 
 out_clear_bit:

[PATCH 6.1 184/224] mm: kfence: fix using kfence_metadata without initialization in show_object()

[Greg Kroah-Hartman]

From: Muchun Song <songmuchun@bytedance.com>

commit 1c86a188e03156223a34d09ce290b49bd4dd0403 upstream.

The variable kfence_metadata is initialized in kfence_init_pool(), then,
it is not initialized if kfence is disabled after booting.  In this case,
kfence_metadata will be used (e.g.  ->lock and ->state fields) without
initialization when reading /sys/kernel/debug/kfence/objects.  There will
be a warning if you enable CONFIG_DEBUG_SPINLOCK.  Fix it by creating
debugfs files when necessary.

Link: https://lkml.kernel.org/r/20230315034441.44321-1-songmuchun@bytedance.com
Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/kfence/core.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/mm/kfence/core.c
+++ b/mm/kfence/core.c
@@ -727,10 +727,14 @@ static const struct seq_operations objec
 };
 DEFINE_SEQ_ATTRIBUTE(objects);
 
-static int __init kfence_debugfs_init(void)
+static int kfence_debugfs_init(void)
 {
-	struct dentry *kfence_dir = debugfs_create_dir("kfence", NULL);
+	struct dentry *kfence_dir;
 
+	if (!READ_ONCE(kfence_enabled))
+		return 0;
+
+	kfence_dir = debugfs_create_dir("kfence", NULL);
 	debugfs_create_file("stats", 0444, kfence_dir, NULL, &stats_fops);
 	debugfs_create_file("objects", 0400, kfence_dir, NULL, &objects_fops);
 	return 0;
@@ -893,6 +897,8 @@ static int kfence_init_late(void)
 	}
 
 	kfence_init_enable();
+	kfence_debugfs_init();
+
 	return 0;
 }
 

[PATCH 6.1 185/224] kfence: avoid passing -g for test

[Greg Kroah-Hartman]

From: Marco Elver <elver@google.com>

commit 2e08ca1802441224f5b7cc6bffbb687f7406de95 upstream.

Nathan reported that when building with GNU as and a version of clang that
defaults to DWARF5:

  $ make -skj"$(nproc)" ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \
			LLVM=1 LLVM_IAS=0 O=build \
			mrproper allmodconfig mm/kfence/kfence_test.o
  /tmp/kfence_test-08a0a0.s: Assembler messages:
  /tmp/kfence_test-08a0a0.s:14627: Error: non-constant .uleb128 is not supported
  /tmp/kfence_test-08a0a0.s:14628: Error: non-constant .uleb128 is not supported
  /tmp/kfence_test-08a0a0.s:14632: Error: non-constant .uleb128 is not supported
  /tmp/kfence_test-08a0a0.s:14633: Error: non-constant .uleb128 is not supported
  /tmp/kfence_test-08a0a0.s:14639: Error: non-constant .uleb128 is not supported
  ...

This is because `-g` defaults to the compiler debug info default.  If the
assembler does not support some of the directives used, the above errors
occur.  To fix, remove the explicit passing of `-g`.

All the test wants is that stack traces print valid function names, and
debug info is not required for that.  (I currently cannot recall why I
added the explicit `-g`.)

Link: https://lkml.kernel.org/r/20230316224705.709984-1-elver@google.com
Fixes: bc8fbc5f305a ("kfence: add test suite")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/kfence/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/kfence/Makefile
+++ b/mm/kfence/Makefile
@@ -2,5 +2,5 @@
 
 obj-y := core.o report.o
 
-CFLAGS_kfence_test.o := -g -fno-omit-frame-pointer -fno-optimize-sibling-calls
+CFLAGS_kfence_test.o := -fno-omit-frame-pointer -fno-optimize-sibling-calls
 obj-$(CONFIG_KFENCE_KUNIT_TEST) += kfence_test.o

[PATCH 6.1 186/224] io_uring/net: avoid sending -ECONNABORTED on repeated connection requests

[Greg Kroah-Hartman]

From: Jens Axboe <axboe@kernel.dk>

commit 74e2e17ee1f8d8a0928b90434ad7e2df70f8483e upstream.

Since io_uring does nonblocking connect requests, if we do two repeated
ones without having a listener, the second will get -ECONNABORTED rather
than the expected -ECONNREFUSED. Treat -ECONNABORTED like a normal retry
condition if we're nonblocking, if we haven't already seen it.

Cc: stable@vger.kernel.org
Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Link: https://github.com/axboe/liburing/issues/828
Reported-by: Hui, Chunyang <sanqian.hcy@antgroup.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/net.c |   25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

--- a/io_uring/net.c
+++ b/io_uring/net.c
@@ -47,6 +47,7 @@ struct io_connect {
 	struct sockaddr __user		*addr;
 	int				addr_len;
 	bool				in_progress;
+	bool				seen_econnaborted;
 };
 
 struct io_sr_msg {
@@ -1404,7 +1405,7 @@ int io_connect_prep(struct io_kiocb *req
 
 	conn->addr = u64_to_user_ptr(READ_ONCE(sqe->addr));
 	conn->addr_len =  READ_ONCE(sqe->addr2);
-	conn->in_progress = false;
+	conn->in_progress = conn->seen_econnaborted = false;
 	return 0;
 }
 
@@ -1441,18 +1442,24 @@ int io_connect(struct io_kiocb *req, uns
 
 	ret = __sys_connect_file(req->file, &io->address,
 					connect->addr_len, file_flags);
-	if ((ret == -EAGAIN || ret == -EINPROGRESS) && force_nonblock) {
+	if ((ret == -EAGAIN || ret == -EINPROGRESS || ret == -ECONNABORTED)
+	    && force_nonblock) {
 		if (ret == -EINPROGRESS) {
 			connect->in_progress = true;
-		} else {
-			if (req_has_async_data(req))
-				return -EAGAIN;
-			if (io_alloc_async_data(req)) {
-				ret = -ENOMEM;
+			return -EAGAIN;
+		}
+		if (ret == -ECONNABORTED) {
+			if (connect->seen_econnaborted)
 				goto out;
-			}
-			memcpy(req->async_data, &__io, sizeof(__io));
+			connect->seen_econnaborted = true;
+		}
+		if (req_has_async_data(req))
+			return -EAGAIN;
+		if (io_alloc_async_data(req)) {
+			ret = -ENOMEM;
+			goto out;
 		}
+		memcpy(req->async_data, &__io, sizeof(__io));
 		return -EAGAIN;
 	}
 	if (ret == -ERESTARTSYS)

[PATCH 6.1 187/224] io_uring/rsrc: fix null-ptr-deref in io_file_bitmap_get()

[Greg Kroah-Hartman]

From: Savino Dicanosa <sd7.dev@pm.me>

commit 02a4d923e4400a36d340ea12d8058f69ebf3a383 upstream.

When fixed files are unregistered, file_alloc_end and alloc_hint
are not cleared. This can later cause a NULL pointer dereference in
io_file_bitmap_get() if auto index selection is enabled via
IORING_FILE_INDEX_ALLOC:

[    6.519129] BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
[    6.541468] RIP: 0010:_find_next_zero_bit+0x1a/0x70
[...]
[    6.560906] Call Trace:
[    6.561322]  <TASK>
[    6.561672]  io_file_bitmap_get+0x38/0x60
[    6.562281]  io_fixed_fd_install+0x63/0xb0
[    6.562851]  ? __pfx_io_socket+0x10/0x10
[    6.563396]  io_socket+0x93/0xf0
[    6.563855]  ? __pfx_io_socket+0x10/0x10
[    6.564411]  io_issue_sqe+0x5b/0x3d0
[    6.564914]  io_submit_sqes+0x1de/0x650
[    6.565452]  __do_sys_io_uring_enter+0x4fc/0xb20
[    6.566083]  ? __do_sys_io_uring_register+0x11e/0xd80
[    6.566779]  do_syscall_64+0x3c/0x90
[    6.567247]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[...]

To fix the issue, set file alloc range and alloc_hint to zero after
file tables are freed.

Cc: stable@vger.kernel.org
Fixes: 4278a0deb1f6 ("io_uring: defer alloc_hint update to io_file_bitmap_set()")
Signed-off-by: Savino Dicanosa <sd7.dev@pm.me>
[axboe: add explicit bitmap == NULL check as well]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/filetable.c |    3 +++
 io_uring/rsrc.c      |    1 +
 2 files changed, 4 insertions(+)

--- a/io_uring/filetable.c
+++ b/io_uring/filetable.c
@@ -19,6 +19,9 @@ static int io_file_bitmap_get(struct io_
 	unsigned long nr = ctx->file_alloc_end;
 	int ret;
 
+	if (!table->bitmap)
+		return -ENFILE;
+
 	do {
 		ret = find_next_zero_bit(table->bitmap, nr, table->alloc_hint);
 		if (ret != nr)
--- a/io_uring/rsrc.c
+++ b/io_uring/rsrc.c
@@ -779,6 +779,7 @@ void __io_sqe_files_unregister(struct io
 	}
 #endif
 	io_free_file_tables(&ctx->file_table);
+	io_file_table_set_alloc_range(ctx, 0, 0);
 	io_rsrc_data_free(ctx->file_data);
 	ctx->file_data = NULL;
 	ctx->nr_user_files = 0;

[PATCH 6.1 188/224] Revert "kasan: drop skip_kasan_poison variable in free_pages_prepare"

[Greg Kroah-Hartman]

From: Peter Collingbourne <pcc@google.com>

commit f446883d12b8bfa486f7c98d403054d61d38c989 upstream.

This reverts commit 487a32ec24be819e747af8c2ab0d5c515508086a.

should_skip_kasan_poison() reads the PG_skip_kasan_poison flag from
page->flags.  However, this line of code in free_pages_prepare():

	page->flags &= ~PAGE_FLAGS_CHECK_AT_PREP;

clears most of page->flags, including PG_skip_kasan_poison, before calling
should_skip_kasan_poison(), which meant that it would never return true as
a result of the page flag being set.  Therefore, fix the code to call
should_skip_kasan_poison() before clearing the flags, as we were doing
before the reverted patch.

This fixes a measurable performance regression introduced in the reverted
commit, where munmap() takes longer than intended if HW tags KASAN is
supported and enabled at runtime.  Without this patch, we see a
single-digit percentage performance regression in a particular
mmap()-heavy benchmark when enabling HW tags KASAN, and with the patch,
there is no statistically significant performance impact when enabling HW
tags KASAN.

Link: https://lkml.kernel.org/r/20230310042914.3805818-2-pcc@google.com
Fixes: 487a32ec24be ("kasan: drop skip_kasan_poison variable in free_pages_prepare")
  Link: https://linux-review.googlesource.com/id/Ic4f13affeebd20548758438bb9ed9ca40e312b79
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>	[6.1]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/page_alloc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1402,6 +1402,7 @@ static __always_inline bool free_pages_p
 			unsigned int order, bool check_free, fpi_t fpi_flags)
 {
 	int bad = 0;
+	bool skip_kasan_poison = should_skip_kasan_poison(page, fpi_flags);
 	bool init = want_init_on_free();
 
 	VM_BUG_ON_PAGE(PageTail(page), page);
@@ -1476,7 +1477,7 @@ static __always_inline bool free_pages_p
 	 * With hardware tag-based KASAN, memory tags must be set before the
 	 * page becomes unavailable via debug_pagealloc or arch_free_page.
 	 */
-	if (!should_skip_kasan_poison(page, fpi_flags)) {
+	if (!skip_kasan_poison) {
 		kasan_poison_pages(page, order, init);
 
 		/* Memory is already initialized if KASAN did it internally. */

[PATCH 6.1 189/224] test_maple_tree: add more testing for mas_empty_area()

[Greg Kroah-Hartman]

From: Liam R. Howlett <Liam.Howlett@oracle.com>

commit 4bd6dded6318dc8e2514d74868c1f8fb38b61a60 upstream.

Test robust filling of an entire area of the tree, then test one beyond.
This is to test the walking back up the tree at the end of nodes and error
condition.  Test inspired by the reproducer code provided by Snild Dolkow.

The last test in the function tests for the case of a corrupted maple
state caused by the incorrect limits set during mas_skip_node().  There
needs to be a gap in the second last child and last child, but the search
must rule out the second last child's gap.  This would avoid correcting
the maple state to the correct max limit and return an error.

Link: https://lkml.kernel.org/r/20230307180247.2220303-3-Liam.Howlett@oracle.com
Cc: Snild Dolkow <snild@sony.com>
Link: https://lore.kernel.org/linux-mm/cb8dc31a-fef2-1d09-f133-e9f7b9f9e77a@sony.com/
Fixes: e15e06a83923 ("lib/test_maple_tree: add testing for maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 lib/test_maple_tree.c |   48 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

--- a/lib/test_maple_tree.c
+++ b/lib/test_maple_tree.c
@@ -2602,6 +2602,49 @@ static noinline void check_empty_area_wi
 	rcu_read_unlock();
 }
 
+static noinline void check_empty_area_fill(struct maple_tree *mt)
+{
+	const unsigned long max = 0x25D78000;
+	unsigned long size;
+	int loop, shift;
+	MA_STATE(mas, mt, 0, 0);
+
+	mt_set_non_kernel(99999);
+	for (shift = 12; shift <= 16; shift++) {
+		loop = 5000;
+		size = 1 << shift;
+		while (loop--) {
+			mas_set(&mas, 0);
+			mas_lock(&mas);
+			MT_BUG_ON(mt, mas_empty_area(&mas, 0, max, size) != 0);
+			MT_BUG_ON(mt, mas.last != mas.index + size - 1);
+			mas_store_gfp(&mas, (void *)size, GFP_KERNEL);
+			mas_unlock(&mas);
+			mas_reset(&mas);
+		}
+	}
+
+	/* No space left. */
+	size = 0x1000;
+	rcu_read_lock();
+	MT_BUG_ON(mt, mas_empty_area(&mas, 0, max, size) != -EBUSY);
+	rcu_read_unlock();
+
+	/* Fill a depth 3 node to the maximum */
+	for (unsigned long i = 629440511; i <= 629440800; i += 6)
+		mtree_store_range(mt, i, i + 5, (void *)i, GFP_KERNEL);
+	/* Make space in the second-last depth 4 node */
+	mtree_erase(mt, 631668735);
+	/* Make space in the last depth 4 node */
+	mtree_erase(mt, 629506047);
+	mas_reset(&mas);
+	/* Search from just after the gap in the second-last depth 4 */
+	rcu_read_lock();
+	MT_BUG_ON(mt, mas_empty_area(&mas, 629506048, 690000000, 0x5000) != 0);
+	rcu_read_unlock();
+	mt_set_non_kernel(0);
+}
+
 static DEFINE_MTREE(tree);
 static int maple_tree_seed(void)
 {
@@ -2854,6 +2897,11 @@ static int maple_tree_seed(void)
 	check_empty_area_window(&tree);
 	mtree_destroy(&tree);
 
+	mt_init_flags(&tree, MT_FLAGS_ALLOC_RANGE);
+	check_empty_area_fill(&tree);
+	mtree_destroy(&tree);
+
+
 #if defined(BENCH)
 skip:
 #endif

[PATCH 6.1 190/224] maple_tree: fix mas_skip_node() end slot detection

[Greg Kroah-Hartman]

From: Liam R. Howlett <Liam.Howlett@oracle.com>

commit 0fa99fdfe1b38da396d0b2d1496a823bcd0ebea0 upstream.

Patch series "Fix mas_skip_node() for mas_empty_area()", v2.

mas_empty_area() was incorrectly returning an error when there was room.
The issue was tracked down to mas_skip_node() using the incorrect
end-of-slot count.  Instead of using the nodes hard limit, the limit of
data should be used.

mas_skip_node() was also setting the min and max to that of the child
node, which was unnecessary.  Within these limits being set, there was
also a bug that corrupted the maple state's max if the offset was set to
the maximum node pivot.  The bug was without consequence unless there was
a sufficient gap in the next child node which would cause an error to be
returned.

This patch set fixes these errors by removing the limit setting from
mas_skip_node() and uses the mas_data_end() for slot limits, and adds
tests for all failures discovered.


This patch (of 2):

mas_skip_node() is used to move the maple state to the node with a higher
limit.  It does this by walking up the tree and increasing the slot count.
Since slot count may not be able to be increased, it may need to walk up
multiple times to find room to walk right to a higher limit node.  The
limit of slots that was being used was the node limit and not the last
location of data in the node.  This would cause the maple state to be
shifted outside actual data and enter an error state, thus returning
-EBUSY.

The result of the incorrect error state means that mas_awalk() would
return an error instead of finding the allocation space.

The fix is to use mas_data_end() in mas_skip_node() to detect the nodes
data end point and continue walking the tree up until it is safe to move
to a node with a higher limit.

The walk up the tree also sets the maple state limits so remove the buggy
code from mas_skip_node().  Setting the limits had the unfortunate side
effect of triggering another bug if the parent node was full and the there
was no suitable gap in the second last child, but room in the next child.

mas_skip_node() may also be passed a maple state in an error state from
mas_anode_descend() when no allocations are available.  Return on such an
error state immediately.

Link: https://lkml.kernel.org/r/20230307180247.2220303-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230307180247.2220303-2-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Snild Dolkow <snild@sony.com>
  Link: https://lore.kernel.org/linux-mm/cb8dc31a-fef2-1d09-f133-e9f7b9f9e77a@sony.com/
Tested-by: Snild Dolkow <snild@sony.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 lib/maple_tree.c |   24 +++++-------------------
 1 file changed, 5 insertions(+), 19 deletions(-)

--- a/lib/maple_tree.c
+++ b/lib/maple_tree.c
@@ -5088,35 +5088,21 @@ static inline bool mas_rewind_node(struc
  */
 static inline bool mas_skip_node(struct ma_state *mas)
 {
-	unsigned char slot, slot_count;
-	unsigned long *pivots;
-	enum maple_type mt;
+	if (mas_is_err(mas))
+		return false;
 
-	mt = mte_node_type(mas->node);
-	slot_count = mt_slots[mt] - 1;
 	do {
 		if (mte_is_root(mas->node)) {
-			slot = mas->offset;
-			if (slot > slot_count) {
+			if (mas->offset >= mas_data_end(mas)) {
 				mas_set_err(mas, -EBUSY);
 				return false;
 			}
 		} else {
 			mas_ascend(mas);
-			slot = mas->offset;
-			mt = mte_node_type(mas->node);
-			slot_count = mt_slots[mt] - 1;
 		}
-	} while (slot > slot_count);
-
-	mas->offset = ++slot;
-	pivots = ma_pivots(mas_mn(mas), mt);
-	if (slot > 0)
-		mas->min = pivots[slot - 1] + 1;
-
-	if (slot <= slot_count)
-		mas->max = pivots[slot];
+	} while (mas->offset >= mas_data_end(mas));
 
+	mas->offset++;
 	return true;
 }
 

[PATCH 6.1 191/224] ksmbd: fix wrong signingkey creation when encryption is AES256

[Greg Kroah-Hartman]

From: Namjae Jeon <linkinjeon@kernel.org>

commit 7a891d4b62d62566323676cb0e922ded4f37afe1 upstream.

MacOS and Win11 support AES256 encrytion and it is included in the cipher
array of encryption context. Especially on macOS, The most preferred
cipher is AES256. Connecting to ksmbd fails on newer MacOS clients that
support AES256 encryption. MacOS send disconnect request after receiving
final session setup response from ksmbd. Because final session setup is
signed with signing key was generated incorrectly.
For signging key, 'L' value should be initialized to 128 if key size is
16bytes.

Cc: stable@vger.kernel.org
Reported-by: Miao Lihua <441884205@qq.com>
Tested-by: Miao Lihua <441884205@qq.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ksmbd/auth.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/ksmbd/auth.c
+++ b/fs/ksmbd/auth.c
@@ -727,8 +727,9 @@ static int generate_key(struct ksmbd_con
 		goto smb3signkey_ret;
 	}
 
-	if (conn->cipher_type == SMB2_ENCRYPTION_AES256_CCM ||
-	    conn->cipher_type == SMB2_ENCRYPTION_AES256_GCM)
+	if (key_size == SMB3_ENC_DEC_KEY_SIZE &&
+	    (conn->cipher_type == SMB2_ENCRYPTION_AES256_CCM ||
+	     conn->cipher_type == SMB2_ENCRYPTION_AES256_GCM))
 		rc = crypto_shash_update(CRYPTO_HMACSHA256(ctx), L256, 4);
 	else
 		rc = crypto_shash_update(CRYPTO_HMACSHA256(ctx), L128, 4);

[PATCH 6.1 192/224] ksmbd: set FILE_NAMED_STREAMS attribute in FS_ATTRIBUTE_INFORMATION

[Greg Kroah-Hartman]

From: Namjae Jeon <linkinjeon@kernel.org>

commit 728f14c72b71a19623df329c1c7c9d1452e56f1e upstream.

If vfs objects = streams_xattr in ksmbd.conf FILE_NAMED_STREAMS should
be set to Attributes in FS_ATTRIBUTE_INFORMATION. MacOS client show
"Format: SMB (Unknown)" on faked NTFS and no streams support.

Cc: stable@vger.kernel.org
Reported-by: Miao Lihua <441884205@qq.com>
Tested-by: Miao Lihua <441884205@qq.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ksmbd/smb2pdu.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -4954,6 +4954,10 @@ static int smb2_get_info_filesystem(stru
 
 		info->Attributes |= cpu_to_le32(server_conf.share_fake_fscaps);
 
+		if (test_share_config_flag(work->tcon->share_conf,
+		    KSMBD_SHARE_FLAG_STREAMS))
+			info->Attributes |= cpu_to_le32(FILE_NAMED_STREAMS);
+
 		info->MaxPathNameComponentLength = cpu_to_le32(stfs.f_namelen);
 		len = smbConvertToUTF16((__le16 *)info->FileSystemName,
 					"NTFS", PATH_MAX, conn->local_nls, 0);

[PATCH 6.1 193/224] ksmbd: dont terminate inactive sessions after a few seconds

[Greg Kroah-Hartman]

From: Namjae Jeon <linkinjeon@kernel.org>

commit be6f42fad5f5fd1fea9d562df82c38ad6ed3bfe9 upstream.

Steve reported that inactive sessions are terminated after a few
seconds. ksmbd terminate when receiving -EAGAIN error from
kernel_recvmsg(). -EAGAIN means there is no data available in timeout.
So ksmbd should keep connection with unlimited retries instead of
terminating inactive sessions.

Cc: stable@vger.kernel.org
Reported-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ksmbd/connection.c     |    4 ++--
 fs/ksmbd/connection.h     |    3 ++-
 fs/ksmbd/transport_rdma.c |    2 +-
 fs/ksmbd/transport_tcp.c  |   35 +++++++++++++++++++++++------------
 4 files changed, 28 insertions(+), 16 deletions(-)

--- a/fs/ksmbd/connection.c
+++ b/fs/ksmbd/connection.c
@@ -298,7 +298,7 @@ int ksmbd_conn_handler_loop(void *p)
 		kvfree(conn->request_buf);
 		conn->request_buf = NULL;
 
-		size = t->ops->read(t, hdr_buf, sizeof(hdr_buf));
+		size = t->ops->read(t, hdr_buf, sizeof(hdr_buf), -1);
 		if (size != sizeof(hdr_buf))
 			break;
 
@@ -344,7 +344,7 @@ int ksmbd_conn_handler_loop(void *p)
 		 * We already read 4 bytes to find out PDU size, now
 		 * read in PDU
 		 */
-		size = t->ops->read(t, conn->request_buf + 4, pdu_size);
+		size = t->ops->read(t, conn->request_buf + 4, pdu_size, 2);
 		if (size < 0) {
 			pr_err("sock_read failed: %d\n", size);
 			break;
--- a/fs/ksmbd/connection.h
+++ b/fs/ksmbd/connection.h
@@ -114,7 +114,8 @@ struct ksmbd_transport_ops {
 	int (*prepare)(struct ksmbd_transport *t);
 	void (*disconnect)(struct ksmbd_transport *t);
 	void (*shutdown)(struct ksmbd_transport *t);
-	int (*read)(struct ksmbd_transport *t, char *buf, unsigned int size);
+	int (*read)(struct ksmbd_transport *t, char *buf,
+		    unsigned int size, int max_retries);
 	int (*writev)(struct ksmbd_transport *t, struct kvec *iovs, int niov,
 		      int size, bool need_invalidate_rkey,
 		      unsigned int remote_key);
--- a/fs/ksmbd/transport_rdma.c
+++ b/fs/ksmbd/transport_rdma.c
@@ -670,7 +670,7 @@ static int smb_direct_post_recv(struct s
 }
 
 static int smb_direct_read(struct ksmbd_transport *t, char *buf,
-			   unsigned int size)
+			   unsigned int size, int unused)
 {
 	struct smb_direct_recvmsg *recvmsg;
 	struct smb_direct_data_transfer *data_transfer;
--- a/fs/ksmbd/transport_tcp.c
+++ b/fs/ksmbd/transport_tcp.c
@@ -291,16 +291,18 @@ static int ksmbd_tcp_run_kthread(struct
 
 /**
  * ksmbd_tcp_readv() - read data from socket in given iovec
- * @t:		TCP transport instance
- * @iov_orig:	base IO vector
- * @nr_segs:	number of segments in base iov
- * @to_read:	number of bytes to read from socket
+ * @t:			TCP transport instance
+ * @iov_orig:		base IO vector
+ * @nr_segs:		number of segments in base iov
+ * @to_read:		number of bytes to read from socket
+ * @max_retries:	maximum retry count
  *
  * Return:	on success return number of bytes read from socket,
  *		otherwise return error number
  */
 static int ksmbd_tcp_readv(struct tcp_transport *t, struct kvec *iov_orig,
-			   unsigned int nr_segs, unsigned int to_read)
+			   unsigned int nr_segs, unsigned int to_read,
+			   int max_retries)
 {
 	int length = 0;
 	int total_read;
@@ -308,7 +310,6 @@ static int ksmbd_tcp_readv(struct tcp_tr
 	struct msghdr ksmbd_msg;
 	struct kvec *iov;
 	struct ksmbd_conn *conn = KSMBD_TRANS(t)->conn;
-	int max_retry = 2;
 
 	iov = get_conn_iovec(t, nr_segs);
 	if (!iov)
@@ -335,14 +336,23 @@ static int ksmbd_tcp_readv(struct tcp_tr
 		} else if (conn->status == KSMBD_SESS_NEED_RECONNECT) {
 			total_read = -EAGAIN;
 			break;
-		} else if ((length == -ERESTARTSYS || length == -EAGAIN) &&
-			   max_retry) {
+		} else if (length == -ERESTARTSYS || length == -EAGAIN) {
+			/*
+			 * If max_retries is negative, Allow unlimited
+			 * retries to keep connection with inactive sessions.
+			 */
+			if (max_retries == 0) {
+				total_read = length;
+				break;
+			} else if (max_retries > 0) {
+				max_retries--;
+			}
+
 			usleep_range(1000, 2000);
 			length = 0;
-			max_retry--;
 			continue;
 		} else if (length <= 0) {
-			total_read = -EAGAIN;
+			total_read = length;
 			break;
 		}
 	}
@@ -358,14 +368,15 @@ static int ksmbd_tcp_readv(struct tcp_tr
  * Return:	on success return number of bytes read from socket,
  *		otherwise return error number
  */
-static int ksmbd_tcp_read(struct ksmbd_transport *t, char *buf, unsigned int to_read)
+static int ksmbd_tcp_read(struct ksmbd_transport *t, char *buf,
+			  unsigned int to_read, int max_retries)
 {
 	struct kvec iov;
 
 	iov.iov_base = buf;
 	iov.iov_len = to_read;
 
-	return ksmbd_tcp_readv(TCP_TRANS(t), &iov, 1, to_read);
+	return ksmbd_tcp_readv(TCP_TRANS(t), &iov, 1, to_read, max_retries);
 }
 
 static int ksmbd_tcp_writev(struct ksmbd_transport *t, struct kvec *iov,

[PATCH 6.1 194/224] ksmbd: return STATUS_NOT_SUPPORTED on unsupported smb2.0 dialect

[Greg Kroah-Hartman]

From: Namjae Jeon <linkinjeon@kernel.org>

commit b53e8cfec30b93c120623232ba27c041b1ef8f1a upstream.

ksmbd returned "Input/output error" when mounting with vers=2.0 to
ksmbd. It should return STATUS_NOT_SUPPORTED on unsupported smb2.0
dialect.

Cc: stable@vger.kernel.org
Reported-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ksmbd/smb_common.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/ksmbd/smb_common.c
+++ b/fs/ksmbd/smb_common.c
@@ -434,7 +434,7 @@ int ksmbd_extract_shortname(struct ksmbd
 
 static int __smb2_negotiate(struct ksmbd_conn *conn)
 {
-	return (conn->dialect >= SMB21_PROT_ID &&
+	return (conn->dialect >= SMB20_PROT_ID &&
 		conn->dialect <= SMB311_PROT_ID);
 }
 
@@ -465,7 +465,7 @@ int ksmbd_smb_negotiate_common(struct ks
 		}
 	}
 
-	if (command == SMB2_NEGOTIATE_HE && __smb2_negotiate(conn)) {
+	if (command == SMB2_NEGOTIATE_HE) {
 		ret = smb2_handle_negotiate(work);
 		init_smb2_neg_rsp(work);
 		return ret;

[PATCH 6.1 195/224] ksmbd: return unsupported error on smb1 mount

[Greg Kroah-Hartman]

From: Namjae Jeon <linkinjeon@kernel.org>

commit 39b291b86b5988bf8753c3874d5c773399d09b96 upstream.

ksmbd disconnect connection when mounting with vers=smb1.
ksmbd should send smb1 negotiate response to client for correct
unsupported error return. This patch add needed SMB1 macros and fill
NegProt part of the response for smb1 negotiate response.

Cc: stable@vger.kernel.org
Reported-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ksmbd/connection.c |    7 ++-----
 fs/ksmbd/smb_common.c |   23 ++++++++++++++++++++---
 fs/ksmbd/smb_common.h |   30 ++++++++----------------------
 3 files changed, 30 insertions(+), 30 deletions(-)

--- a/fs/ksmbd/connection.c
+++ b/fs/ksmbd/connection.c
@@ -319,13 +319,10 @@ int ksmbd_conn_handler_loop(void *p)
 		}
 
 		/*
-		 * Check if pdu size is valid (min : smb header size,
-		 * max : 0x00FFFFFF).
+		 * Check maximum pdu size(0x00FFFFFF).
 		 */
-		if (pdu_size < __SMB2_HEADER_STRUCTURE_SIZE ||
-		    pdu_size > MAX_STREAM_PROT_LEN) {
+		if (pdu_size > MAX_STREAM_PROT_LEN)
 			break;
-		}
 
 		/* 4 for rfc1002 length field */
 		size = pdu_size + 4;
--- a/fs/ksmbd/smb_common.c
+++ b/fs/ksmbd/smb_common.c
@@ -442,9 +442,26 @@ static int smb_handle_negotiate(struct k
 {
 	struct smb_negotiate_rsp *neg_rsp = work->response_buf;
 
-	ksmbd_debug(SMB, "Unsupported SMB protocol\n");
-	neg_rsp->hdr.Status.CifsError = STATUS_INVALID_LOGON_TYPE;
-	return -EINVAL;
+	ksmbd_debug(SMB, "Unsupported SMB1 protocol\n");
+
+	/*
+	 * Remove 4 byte direct TCP header, add 2 byte bcc and
+	 * 2 byte DialectIndex.
+	 */
+	*(__be32 *)work->response_buf =
+		cpu_to_be32(sizeof(struct smb_hdr) - 4 + 2 + 2);
+	neg_rsp->hdr.Status.CifsError = STATUS_SUCCESS;
+
+	neg_rsp->hdr.Command = SMB_COM_NEGOTIATE;
+	*(__le32 *)neg_rsp->hdr.Protocol = SMB1_PROTO_NUMBER;
+	neg_rsp->hdr.Flags = SMBFLG_RESPONSE;
+	neg_rsp->hdr.Flags2 = SMBFLG2_UNICODE | SMBFLG2_ERR_STATUS |
+		SMBFLG2_EXT_SEC | SMBFLG2_IS_LONG_NAME;
+
+	neg_rsp->hdr.WordCount = 1;
+	neg_rsp->DialectIndex = cpu_to_le16(work->conn->dialect);
+	neg_rsp->ByteCount = 0;
+	return 0;
 }
 
 int ksmbd_smb_negotiate_common(struct ksmbd_work *work, unsigned int command)
--- a/fs/ksmbd/smb_common.h
+++ b/fs/ksmbd/smb_common.h
@@ -158,8 +158,15 @@
 
 #define SMB1_PROTO_NUMBER		cpu_to_le32(0x424d53ff)
 #define SMB_COM_NEGOTIATE		0x72
-
 #define SMB1_CLIENT_GUID_SIZE		(16)
+
+#define SMBFLG_RESPONSE 0x80	/* this PDU is a response from server */
+
+#define SMBFLG2_IS_LONG_NAME	cpu_to_le16(0x40)
+#define SMBFLG2_EXT_SEC		cpu_to_le16(0x800)
+#define SMBFLG2_ERR_STATUS	cpu_to_le16(0x4000)
+#define SMBFLG2_UNICODE		cpu_to_le16(0x8000)
+
 struct smb_hdr {
 	__be32 smb_buf_length;
 	__u8 Protocol[4];
@@ -199,28 +206,7 @@ struct smb_negotiate_req {
 struct smb_negotiate_rsp {
 	struct smb_hdr hdr;     /* wct = 17 */
 	__le16 DialectIndex; /* 0xFFFF = no dialect acceptable */
-	__u8 SecurityMode;
-	__le16 MaxMpxCount;
-	__le16 MaxNumberVcs;
-	__le32 MaxBufferSize;
-	__le32 MaxRawSize;
-	__le32 SessionKey;
-	__le32 Capabilities;    /* see below */
-	__le32 SystemTimeLow;
-	__le32 SystemTimeHigh;
-	__le16 ServerTimeZone;
-	__u8 EncryptionKeyLength;
 	__le16 ByteCount;
-	union {
-		unsigned char EncryptionKey[8]; /* cap extended security off */
-		/* followed by Domain name - if extended security is off */
-		/* followed by 16 bytes of server GUID */
-		/* then security blob if cap_extended_security negotiated */
-		struct {
-			unsigned char GUID[SMB1_CLIENT_GUID_SIZE];
-			unsigned char SecurityBlob[1];
-		} __packed extended_response;
-	} __packed u;
 } __packed;
 
 struct filesystem_attribute_info {

[PATCH 6.1 196/224] wifi: mac80211: fix qos on mesh interfaces

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

commit 4e348c6c6e23491ae6eb5e077848a42d0562339c upstream.

When ieee80211_select_queue is called for mesh, the sta pointer is usually
NULL, since the nexthop is looked up much later in the tx path.
Explicitly check for unicast address in that case in order to make qos work
again.

Cc: stable@vger.kernel.org
Fixes: 50e2ab392919 ("wifi: mac80211: fix queue selection for mesh/OCB interfaces")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230314095956.62085-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/wme.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -144,12 +144,14 @@ u16 ieee80211_select_queue_80211(struct
 u16 __ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
 			     struct sta_info *sta, struct sk_buff *skb)
 {
+	const struct ethhdr *eth = (void *)skb->data;
 	struct mac80211_qos_map *qos_map;
 	bool qos;
 
 	/* all mesh/ocb stations are required to support WME */
-	if (sta && (sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
-		    sdata->vif.type == NL80211_IFTYPE_OCB))
+	if ((sdata->vif.type == NL80211_IFTYPE_MESH_POINT &&
+	    !is_multicast_ether_addr(eth->h_dest)) ||
+	    (sdata->vif.type == NL80211_IFTYPE_OCB && sta))
 		qos = true;
 	else if (sta)
 		qos = sta->sta.wme;

[PATCH 6.1 197/224] nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy()

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit 003587000276f81d0114b5ce773d80c119d8cb30 upstream.

The ioctl helper function nilfs_ioctl_wrap_copy(), which exchanges a
metadata array to/from user space, may copy uninitialized buffer regions
to user space memory for read-only ioctl commands NILFS_IOCTL_GET_SUINFO
and NILFS_IOCTL_GET_CPINFO.

This can occur when the element size of the user space metadata given by
the v_size member of the argument nilfs_argv structure is larger than the
size of the metadata element (nilfs_suinfo structure or nilfs_cpinfo
structure) on the file system side.

KMSAN-enabled kernels detect this issue as follows:

 BUG: KMSAN: kernel-infoleak in instrument_copy_to_user
 include/linux/instrumented.h:121 [inline]
 BUG: KMSAN: kernel-infoleak in _copy_to_user+0xc0/0x100 lib/usercopy.c:33
  instrument_copy_to_user include/linux/instrumented.h:121 [inline]
  _copy_to_user+0xc0/0x100 lib/usercopy.c:33
  copy_to_user include/linux/uaccess.h:169 [inline]
  nilfs_ioctl_wrap_copy+0x6fa/0xc10 fs/nilfs2/ioctl.c:99
  nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline]
  nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290
  nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343
  __do_compat_sys_ioctl fs/ioctl.c:968 [inline]
  __se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910
  __ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910
  do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
  __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
  do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
  do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
  entry_SYSENTER_compat_after_hwframe+0x70/0x82

 Uninit was created at:
  __alloc_pages+0x9f6/0xe90 mm/page_alloc.c:5572
  alloc_pages+0xab0/0xd80 mm/mempolicy.c:2287
  __get_free_pages+0x34/0xc0 mm/page_alloc.c:5599
  nilfs_ioctl_wrap_copy+0x223/0xc10 fs/nilfs2/ioctl.c:74
  nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline]
  nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290
  nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343
  __do_compat_sys_ioctl fs/ioctl.c:968 [inline]
  __se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910
  __ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910
  do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
  __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
  do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
  do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
  entry_SYSENTER_compat_after_hwframe+0x70/0x82

 Bytes 16-127 of 3968 are uninitialized
 ...

This eliminates the leak issue by initializing the page allocated as
buffer using get_zeroed_page().

Link: https://lkml.kernel.org/r/20230307085548.6290-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+132fdd2f1e1805fdc591@syzkaller.appspotmail.com
  Link: https://lkml.kernel.org/r/000000000000a5bd2d05f63f04ae@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -71,7 +71,7 @@ static int nilfs_ioctl_wrap_copy(struct
 	if (argv->v_index > ~(__u64)0 - argv->v_nmembs)
 		return -EINVAL;
 
-	buf = (void *)__get_free_pages(GFP_NOFS, 0);
+	buf = (void *)get_zeroed_page(GFP_NOFS);
 	if (unlikely(!buf))
 		return -ENOMEM;
 	maxmembs = PAGE_SIZE / argv->v_size;

[PATCH 6.1 198/224] drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found

[Greg Kroah-Hartman]

From: Matheus Castello <matheus.castello@toradex.com>

commit 1a70ca89d59c7c8af006d29b965a95ede0abb0da upstream.

Returns EPROBE_DEFER when of_drm_find_bridge() fails, this is consistent
with what all the other DRM bridge drivers are doing and this is
required since the bridge might not be there when the driver is probed
and this should not be a fatal failure.

Cc: <stable@vger.kernel.org>
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Matheus Castello <matheus.castello@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230322143821.109744-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/bridge/lontium-lt8912b.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/bridge/lontium-lt8912b.c
+++ b/drivers/gpu/drm/bridge/lontium-lt8912b.c
@@ -659,8 +659,8 @@ static int lt8912_parse_dt(struct lt8912
 
 	lt->hdmi_port = of_drm_find_bridge(port_node);
 	if (!lt->hdmi_port) {
-		dev_err(lt->dev, "%s: Failed to get hdmi port\n", __func__);
-		ret = -ENODEV;
+		ret = -EPROBE_DEFER;
+		dev_err_probe(lt->dev, ret, "%s: Failed to get hdmi port\n", __func__);
 		goto err_free_host_node;
 	}
 

[PATCH 6.1 199/224] drm/amd/display: fix wrong index used in dccg32_set_dpstreamclk

[Greg Kroah-Hartman]

From: Hersen Wu <hersenxs.wu@amd.com>

commit 4c94e57c258cb7800aa5f3a9d9597d91291407a9 upstream.

[Why & How]
When merging commit 9af611f29034
("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming"),
index change was not picked up.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 9af611f29034 ("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
index e4472c6be6c3..3fb4bcc34353 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dccg.c
@@ -271,8 +271,7 @@ static void dccg32_set_dpstreamclk(
 	dccg32_set_dtbclk_p_src(dccg, src, otg_inst);
 
 	/* enabled to select one of the DTBCLKs for pipe */
-	switch (otg_inst)
-	{
+	switch (dp_hpo_inst) {
 	case 0:
 		REG_UPDATE_2(DPSTREAMCLK_CNTL,
 			     DPSTREAMCLK0_EN,
-- 
2.40.0

[PATCH 6.1 200/224] drm/meson: fix missing component unbind on bind errors

[Greg Kroah-Hartman]

From: Johan Hovold <johan+linaro@kernel.org>

commit ba98413bf45edbf33672e2539e321b851b2cfbd1 upstream.

Make sure to unbind all subcomponents when binding the aggregate device
fails.

Fixes: a41e82e6c457 ("drm/meson: Add support for components")
Cc: stable@vger.kernel.org      # 4.12
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306103533.4915-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/meson/meson_drv.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -325,23 +325,23 @@ static int meson_drv_bind_master(struct
 
 	ret = meson_encoder_hdmi_init(priv);
 	if (ret)
-		goto exit_afbcd;
+		goto unbind_all;
 
 	ret = meson_plane_create(priv);
 	if (ret)
-		goto exit_afbcd;
+		goto unbind_all;
 
 	ret = meson_overlay_create(priv);
 	if (ret)
-		goto exit_afbcd;
+		goto unbind_all;
 
 	ret = meson_crtc_create(priv);
 	if (ret)
-		goto exit_afbcd;
+		goto unbind_all;
 
 	ret = request_irq(priv->vsync_irq, meson_irq, 0, drm->driver->name, drm);
 	if (ret)
-		goto exit_afbcd;
+		goto unbind_all;
 
 	drm_mode_config_reset(drm);
 
@@ -359,6 +359,9 @@ static int meson_drv_bind_master(struct
 
 uninstall_irq:
 	free_irq(priv->vsync_irq, drm);
+unbind_all:
+	if (has_components)
+		component_unbind_all(drm->dev, drm);
 exit_afbcd:
 	if (priv->afbcd.ops)
 		priv->afbcd.ops->exit(priv);

[PATCH 6.1 201/224] drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD Navi

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit 2b072442f4962231a8516485012bb2d2551ef2fe upstream.

S2idle resume freeze can be observed on Intel ADL + AMD WX5500. This is
caused by commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default").

The root cause is still not clear for now.

So extend and apply the ASPM quirk from commit e02fe3bc7aba
("drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems"), to
workaround the issue on Navi cards too.

Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2458
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h        |    1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |   15 +++++++++++++++
 drivers/gpu/drm/amd/amdgpu/nv.c            |    2 +-
 drivers/gpu/drm/amd/amdgpu/vi.c            |   17 +----------------
 4 files changed, 18 insertions(+), 17 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -1263,6 +1263,7 @@ void amdgpu_device_pci_config_reset(stru
 int amdgpu_device_pci_reset(struct amdgpu_device *adev);
 bool amdgpu_device_need_post(struct amdgpu_device *adev);
 bool amdgpu_device_should_use_aspm(struct amdgpu_device *adev);
+bool amdgpu_device_aspm_support_quirk(void);
 
 void amdgpu_cs_report_moved_bytes(struct amdgpu_device *adev, u64 num_bytes,
 				  u64 num_vis_bytes);
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -78,6 +78,10 @@
 
 #include <drm/drm_drv.h>
 
+#if IS_ENABLED(CONFIG_X86)
+#include <asm/intel-family.h>
+#endif
+
 MODULE_FIRMWARE("amdgpu/vega10_gpu_info.bin");
 MODULE_FIRMWARE("amdgpu/vega12_gpu_info.bin");
 MODULE_FIRMWARE("amdgpu/raven_gpu_info.bin");
@@ -1353,6 +1357,17 @@ bool amdgpu_device_should_use_aspm(struc
 	return pcie_aspm_enabled(adev->pdev);
 }
 
+bool amdgpu_device_aspm_support_quirk(void)
+{
+#if IS_ENABLED(CONFIG_X86)
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	return !(c->x86 == 6 && c->x86_model == INTEL_FAM6_ALDERLAKE);
+#else
+	return true;
+#endif
+}
+
 /* if we get transitioned to only one device, take VGA back */
 /**
  * amdgpu_device_vga_set_decode - enable/disable vga decode
--- a/drivers/gpu/drm/amd/amdgpu/nv.c
+++ b/drivers/gpu/drm/amd/amdgpu/nv.c
@@ -527,7 +527,7 @@ static void nv_pcie_gen3_enable(struct a
 
 static void nv_program_aspm(struct amdgpu_device *adev)
 {
-	if (!amdgpu_device_should_use_aspm(adev))
+	if (!amdgpu_device_should_use_aspm(adev) || !amdgpu_device_aspm_support_quirk())
 		return;
 
 	if (!(adev->flags & AMD_IS_APU) &&
--- a/drivers/gpu/drm/amd/amdgpu/vi.c
+++ b/drivers/gpu/drm/amd/amdgpu/vi.c
@@ -81,10 +81,6 @@
 #include "mxgpu_vi.h"
 #include "amdgpu_dm.h"
 
-#if IS_ENABLED(CONFIG_X86)
-#include <asm/intel-family.h>
-#endif
-
 #define ixPCIE_LC_L1_PM_SUBSTATE	0x100100C6
 #define PCIE_LC_L1_PM_SUBSTATE__LC_L1_SUBSTATES_OVERRIDE_EN_MASK	0x00000001L
 #define PCIE_LC_L1_PM_SUBSTATE__LC_PCI_PM_L1_2_OVERRIDE_MASK	0x00000002L
@@ -1138,24 +1134,13 @@ static void vi_enable_aspm(struct amdgpu
 		WREG32_PCIE(ixPCIE_LC_CNTL, data);
 }
 
-static bool aspm_support_quirk_check(void)
-{
-#if IS_ENABLED(CONFIG_X86)
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	return !(c->x86 == 6 && c->x86_model == INTEL_FAM6_ALDERLAKE);
-#else
-	return true;
-#endif
-}
-
 static void vi_program_aspm(struct amdgpu_device *adev)
 {
 	u32 data, data1, orig;
 	bool bL1SS = false;
 	bool bClkReqSupport = true;
 
-	if (!amdgpu_device_should_use_aspm(adev) || !aspm_support_quirk_check())
+	if (!amdgpu_device_should_use_aspm(adev) || !amdgpu_device_aspm_support_quirk())
 		return;
 
 	if (adev->flags & AMD_IS_APU ||

[PATCH 6.1 202/224] drm/i915/active: Fix missing debug object activation

[Greg Kroah-Hartman]

From: Nirmoy Das <nirmoy.das@intel.com>

commit e92eb246feb9019b0b137706c934b8891cdfe3c2 upstream.

debug_active_activate() expected ref->count to be zero
which is not true anymore as __i915_active_activate() calls
debug_active_activate() after incrementing the count.

v2: No need to check for "ref->count == 1" as __i915_active_activate()
already make sure of that(Janusz).

Fixes: 04240e30ed06 ("drm/i915: Skip taking acquire mutex for no ref->active callback")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313114613.9874-1-nirmoy.das@intel.com
(cherry picked from commit bfad380c542438a9b642f8190b7fd37bc77e2723)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/i915_active.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/gpu/drm/i915/i915_active.c
+++ b/drivers/gpu/drm/i915/i915_active.c
@@ -92,8 +92,7 @@ static void debug_active_init(struct i91
 static void debug_active_activate(struct i915_active *ref)
 {
 	lockdep_assert_held(&ref->tree_lock);
-	if (!atomic_read(&ref->count)) /* before the first inc */
-		debug_object_activate(ref, &active_debug_desc);
+	debug_object_activate(ref, &active_debug_desc);
 }
 
 static void debug_active_deactivate(struct i915_active *ref)

[PATCH 6.1 203/224] drm/i915: Preserve crtc_state->inherited during state clearing

[Greg Kroah-Hartman]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

commit 3a84f2c6c9558c554a90ec26ad25df92fc5e05b7 upstream.

intel_crtc_prepare_cleared_state() is unintentionally losing
the "inherited" flag. This will happen if intel_initial_commit()
is forced to go through the full modeset calculations for
whatever reason.

Afterwards the first real commit from userspace will not get
forced to the full modeset path, and thus eg. audio state may
not get recomputed properly. So if the monitor was already
enabled during boot audio will not work until userspace itself
does an explicit full modeset.

Cc: stable@vger.kernel.org
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223152048.20878-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 2553bacaf953b48c59357f5a622282bc0c45adae)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_display.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -5186,6 +5186,7 @@ intel_crtc_prepare_cleared_state(struct
 	 * only fields that are know to not cause problems are preserved. */
 
 	saved_state->uapi = crtc_state->uapi;
+	saved_state->inherited = crtc_state->inherited;
 	saved_state->scaler_state = crtc_state->scaler_state;
 	saved_state->shared_dpll = crtc_state->shared_dpll;
 	saved_state->dpll_hw_state = crtc_state->dpll_hw_state;

[PATCH 6.1 204/224] drm/amdgpu: skip ASIC reset for APUs when go to S4

[Greg Kroah-Hartman]

From: Tim Huang <tim.huang@amd.com>

commit b589626674de94d977e81c99bf7905872b991197 upstream.

For GC IP v11.0.4/11, PSP TMR need to be reserved
for ASIC mode2 reset. But for S4, when psp suspend,
it will destroy the TMR that fails the ASIC reset.

[  96.006101] amdgpu 0000:62:00.0: amdgpu: MODE2 reset
[  100.409717] amdgpu 0000:62:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000011 SMN_C2PMSG_82:0x00000002
[  100.411593] amdgpu 0000:62:00.0: amdgpu: Mode2 reset failed!
[  100.412470] amdgpu 0000:62:00.0: PM: pci_pm_freeze(): amdgpu_pmops_freeze+0x0/0x50 [amdgpu] returns -62
[  100.414020] amdgpu 0000:62:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xd0 returns -62
[  100.415311] amdgpu 0000:62:00.0: PM: pci_pm_freeze+0x0/0xd0 returned -62 after 4623202 usecs
[  100.416608] amdgpu 0000:62:00.0: PM: failed to freeze async: error -62

We can skip the reset on APUs, assuming we can resume them
properly. Verified on some GFX11, GFX10 and old GFX9 APUs.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -2447,7 +2447,10 @@ static int amdgpu_pmops_freeze(struct de
 	adev->in_s4 = false;
 	if (r)
 		return r;
-	return amdgpu_asic_reset(adev);
+
+	if (amdgpu_acpi_should_gpu_reset(adev))
+		return amdgpu_asic_reset(adev);
+	return 0;
 }
 
 static int amdgpu_pmops_thaw(struct device *dev)

[PATCH 6.1 205/224] drm/amdgpu: reposition the gpu reset checking for reuse

[Greg Kroah-Hartman]

From: Tim Huang <tim.huang@amd.com>

commit aaee0ce460b954e08b6e630d7e54b2abb672feb8 upstream.

Move the amdgpu_acpi_should_gpu_reset out of
CONFIG_SUSPEND to share it with hibernate case.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h      |    4 +--
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c |   41 +++++++++++++++++--------------
 2 files changed, 25 insertions(+), 20 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -1383,10 +1383,12 @@ int amdgpu_acpi_smart_shift_update(struc
 int amdgpu_acpi_pcie_notify_device_ready(struct amdgpu_device *adev);
 
 void amdgpu_acpi_get_backlight_caps(struct amdgpu_dm_backlight_caps *caps);
+bool amdgpu_acpi_should_gpu_reset(struct amdgpu_device *adev);
 void amdgpu_acpi_detect(void);
 #else
 static inline int amdgpu_acpi_init(struct amdgpu_device *adev) { return 0; }
 static inline void amdgpu_acpi_fini(struct amdgpu_device *adev) { }
+static inline bool amdgpu_acpi_should_gpu_reset(struct amdgpu_device *adev) { return false; }
 static inline void amdgpu_acpi_detect(void) { }
 static inline bool amdgpu_acpi_is_power_shift_control_supported(void) { return false; }
 static inline int amdgpu_acpi_power_shift_control(struct amdgpu_device *adev,
@@ -1397,11 +1399,9 @@ static inline int amdgpu_acpi_smart_shif
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_SUSPEND)
 bool amdgpu_acpi_is_s3_active(struct amdgpu_device *adev);
-bool amdgpu_acpi_should_gpu_reset(struct amdgpu_device *adev);
 bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev);
 #else
 static inline bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev) { return false; }
-static inline bool amdgpu_acpi_should_gpu_reset(struct amdgpu_device *adev) { return false; }
 static inline bool amdgpu_acpi_is_s3_active(struct amdgpu_device *adev) { return false; }
 #endif
 
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
@@ -971,6 +971,29 @@ static bool amdgpu_atcs_pci_probe_handle
 	return true;
 }
 
+
+/**
+ * amdgpu_acpi_should_gpu_reset
+ *
+ * @adev: amdgpu_device_pointer
+ *
+ * returns true if should reset GPU, false if not
+ */
+bool amdgpu_acpi_should_gpu_reset(struct amdgpu_device *adev)
+{
+	if (adev->flags & AMD_IS_APU)
+		return false;
+
+	if (amdgpu_sriov_vf(adev))
+		return false;
+
+#if IS_ENABLED(CONFIG_SUSPEND)
+	return pm_suspend_target_state != PM_SUSPEND_TO_IDLE;
+#else
+	return true;
+#endif
+}
+
 /*
  * amdgpu_acpi_detect - detect ACPI ATIF/ATCS methods
  *
@@ -1043,24 +1066,6 @@ bool amdgpu_acpi_is_s3_active(struct amd
 }
 
 /**
- * amdgpu_acpi_should_gpu_reset
- *
- * @adev: amdgpu_device_pointer
- *
- * returns true if should reset GPU, false if not
- */
-bool amdgpu_acpi_should_gpu_reset(struct amdgpu_device *adev)
-{
-	if (adev->flags & AMD_IS_APU)
-		return false;
-
-	if (amdgpu_sriov_vf(adev))
-		return false;
-
-	return pm_suspend_target_state != PM_SUSPEND_TO_IDLE;
-}
-
-/**
  * amdgpu_acpi_is_s0ix_active
  *
  * @adev: amdgpu_device_pointer

[PATCH 6.1 206/224] riscv: mm: Fix incorrect ASID argument when flushing TLB

[Greg Kroah-Hartman]

From: Dylan Jhong <dylan@andestech.com>

commit 9a801afd3eb95e1a89aba17321062df06fb49d98 upstream.

Currently, we pass the CONTEXTID instead of the ASID to the TLB flush
function. We should only take the ASID field to prevent from touching
the reserved bit field.

Fixes: 3f1e782998cd ("riscv: add ASID-based tlbflushing methods")
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Link: https://lore.kernel.org/r/20230313034906.2401730-1-dylan@andestech.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/include/asm/tlbflush.h |    2 ++
 arch/riscv/mm/context.c           |    2 +-
 arch/riscv/mm/tlbflush.c          |    2 +-
 3 files changed, 4 insertions(+), 2 deletions(-)

--- a/arch/riscv/include/asm/tlbflush.h
+++ b/arch/riscv/include/asm/tlbflush.h
@@ -12,6 +12,8 @@
 #include <asm/errata_list.h>
 
 #ifdef CONFIG_MMU
+extern unsigned long asid_mask;
+
 static inline void local_flush_tlb_all(void)
 {
 	__asm__ __volatile__ ("sfence.vma" : : : "memory");
--- a/arch/riscv/mm/context.c
+++ b/arch/riscv/mm/context.c
@@ -22,7 +22,7 @@ DEFINE_STATIC_KEY_FALSE(use_asid_allocat
 
 static unsigned long asid_bits;
 static unsigned long num_asids;
-static unsigned long asid_mask;
+unsigned long asid_mask;
 
 static atomic_long_t current_version;
 
--- a/arch/riscv/mm/tlbflush.c
+++ b/arch/riscv/mm/tlbflush.c
@@ -42,7 +42,7 @@ static void __sbi_tlb_flush_range(struct
 	/* check if the tlbflush needs to be sent to other CPUs */
 	broadcast = cpumask_any_but(cmask, cpuid) < nr_cpu_ids;
 	if (static_branch_unlikely(&use_asid_allocator)) {
-		unsigned long asid = atomic_long_read(&mm->context.id);
+		unsigned long asid = atomic_long_read(&mm->context.id) & asid_mask;
 
 		if (broadcast) {
 			sbi_remote_sfence_vma_asid(cmask, start, size, asid);

[PATCH 6.1 207/224] riscv: Handle zicsr/zifencei issues between clang and binutils

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit e89c2e815e76471cb507bd95728bf26da7976430 upstream.

There are two related issues that appear in certain combinations with
clang and GNU binutils.

The first occurs when a version of clang that supports zicsr or zifencei
via '-march=' [1] (i.e, >= 17.x) is used in combination with a version
of GNU binutils that do not recognize zicsr and zifencei in the
'-march=' value (i.e., < 2.36):

  riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
  riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/file.o
  riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
  riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/super.o

The second occurs when a version of clang that does not support zicsr or
zifencei via '-march=' (i.e., <= 16.x) is used in combination with a
version of GNU as that defaults to a newer ISA base spec, which requires
specifying zicsr and zifencei in the '-march=' value explicitly (i.e, >=
2.38):

  ../arch/riscv/kernel/kexec_relocate.S: Assembler messages:
  ../arch/riscv/kernel/kexec_relocate.S:147: Error: unrecognized opcode `fence.i', extension `zifencei' required
  clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)

This is the same issue addressed by commit 6df2a016c0c8 ("riscv: fix
build with binutils 2.38") (see [2] for additional information) but
older versions of clang miss out on it because the cc-option check
fails:

  clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'
  clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'

To resolve the first issue, only attempt to add zicsr and zifencei to
the march string when using the GNU assembler 2.38 or newer, which is
when the default ISA spec was updated, requiring these extensions to be
specified explicitly. LLVM implements an older version of the base
specification for all currently released versions, so these instructions
are available as part of the 'i' extension. If LLVM's implementation is
updated in the future, a CONFIG_AS_IS_LLVM condition can be added to
CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI.

To resolve the second issue, use version 2.2 of the base ISA spec when
using an older version of clang that does not support zicsr or zifencei
via '-march=', as that is the spec version most compatible with the one
clang/LLVM implements and avoids the need to specify zicsr and zifencei
explicitly due to still being a part of 'i'.

[1]: https://github.com/llvm/llvm-project/commit/22e199e6afb1263c943c0c0d4498694e15bf8a16
[2]: https://lore.kernel.org/ZAxT7T9Xy1Fo3d5W@aurel32.net/

Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1808
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230313-riscv-zicsr-zifencei-fiasco-v1-1-dd1b7840a551@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/Kconfig  |   22 ++++++++++++++++++++++
 arch/riscv/Makefile |   10 ++++++----
 2 files changed, 28 insertions(+), 4 deletions(-)

--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -442,6 +442,28 @@ config TOOLCHAIN_HAS_ZIHINTPAUSE
 	depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zihintpause)
 	depends on LLD_VERSION >= 150000 || LD_VERSION >= 23600
 
+config TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI
+	def_bool y
+	# https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=aed44286efa8ae8717a77d94b51ac3614e2ca6dc
+	depends on AS_IS_GNU && AS_VERSION >= 23800
+	help
+	  Newer binutils versions default to ISA spec version 20191213 which
+	  moves some instructions from the I extension to the Zicsr and Zifencei
+	  extensions.
+
+config TOOLCHAIN_NEEDS_OLD_ISA_SPEC
+	def_bool y
+	depends on TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI
+	# https://github.com/llvm/llvm-project/commit/22e199e6afb1263c943c0c0d4498694e15bf8a16
+	depends on CC_IS_CLANG && CLANG_VERSION < 170000
+	help
+	  Certain versions of clang do not support zicsr and zifencei via -march
+	  but newer versions of binutils require it for the reasons noted in the
+	  help text of CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI. This
+	  option causes an older ISA spec compatible with these older versions
+	  of clang to be passed to GAS, which has the same result as passing zicsr
+	  and zifencei to -march.
+
 config FPU
 	bool "FPU support"
 	default y
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -57,10 +57,12 @@ riscv-march-$(CONFIG_ARCH_RV64I)	:= rv64
 riscv-march-$(CONFIG_FPU)		:= $(riscv-march-y)fd
 riscv-march-$(CONFIG_RISCV_ISA_C)	:= $(riscv-march-y)c
 
-# Newer binutils versions default to ISA spec version 20191213 which moves some
-# instructions from the I extension to the Zicsr and Zifencei extensions.
-toolchain-need-zicsr-zifencei := $(call cc-option-yn, -march=$(riscv-march-y)_zicsr_zifencei)
-riscv-march-$(toolchain-need-zicsr-zifencei) := $(riscv-march-y)_zicsr_zifencei
+ifdef CONFIG_TOOLCHAIN_NEEDS_OLD_ISA_SPEC
+KBUILD_CFLAGS += -Wa,-misa-spec=2.2
+KBUILD_AFLAGS += -Wa,-misa-spec=2.2
+else
+riscv-march-$(CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI) := $(riscv-march-y)_zicsr_zifencei
+endif
 
 # Check if the toolchain supports Zicbom extension
 riscv-march-$(CONFIG_TOOLCHAIN_HAS_ZICBOM) := $(riscv-march-y)_zicbom

[PATCH 6.1 208/224] tee: amdtee: fix race condition in amdtee_open_session

[Greg Kroah-Hartman]

From: Rijo Thomas <Rijo-john.Thomas@amd.com>

commit f8502fba45bd30e1a6a354d9d898bc99d1a11e6d upstream.

There is a potential race condition in amdtee_open_session that may
lead to use-after-free. For instance, in amdtee_open_session() after
sess->sess_mask is set, and before setting:

    sess->session_info[i] = session_info;

if amdtee_close_session() closes this same session, then 'sess' data
structure will be released, causing kernel panic when 'sess' is
accessed within amdtee_open_session().

The solution is to set the bit sess->sess_mask as the last step in
amdtee_open_session().

Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver")
Cc: stable@vger.kernel.org
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tee/amdtee/core.c |   29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

--- a/drivers/tee/amdtee/core.c
+++ b/drivers/tee/amdtee/core.c
@@ -267,35 +267,34 @@ int amdtee_open_session(struct tee_conte
 		goto out;
 	}
 
+	/* Open session with loaded TA */
+	handle_open_session(arg, &session_info, param);
+	if (arg->ret != TEEC_SUCCESS) {
+		pr_err("open_session failed %d\n", arg->ret);
+		handle_unload_ta(ta_handle);
+		kref_put(&sess->refcount, destroy_session);
+		goto out;
+	}
+
 	/* Find an empty session index for the given TA */
 	spin_lock(&sess->lock);
 	i = find_first_zero_bit(sess->sess_mask, TEE_NUM_SESSIONS);
-	if (i < TEE_NUM_SESSIONS)
+	if (i < TEE_NUM_SESSIONS) {
+		sess->session_info[i] = session_info;
+		set_session_id(ta_handle, i, &arg->session);
 		set_bit(i, sess->sess_mask);
+	}
 	spin_unlock(&sess->lock);
 
 	if (i >= TEE_NUM_SESSIONS) {
 		pr_err("reached maximum session count %d\n", TEE_NUM_SESSIONS);
+		handle_close_session(ta_handle, session_info);
 		handle_unload_ta(ta_handle);
 		kref_put(&sess->refcount, destroy_session);
 		rc = -ENOMEM;
 		goto out;
 	}
 
-	/* Open session with loaded TA */
-	handle_open_session(arg, &session_info, param);
-	if (arg->ret != TEEC_SUCCESS) {
-		pr_err("open_session failed %d\n", arg->ret);
-		spin_lock(&sess->lock);
-		clear_bit(i, sess->sess_mask);
-		spin_unlock(&sess->lock);
-		handle_unload_ta(ta_handle);
-		kref_put(&sess->refcount, destroy_session);
-		goto out;
-	}
-
-	sess->session_info[i] = session_info;
-	set_session_id(ta_handle, i, &arg->session);
 out:
 	free_pages((u64)ta, get_order(ta_size));
 	return rc;

[PATCH 6.1 209/224] firmware: arm_scmi: Fix device node validation for mailbox transport

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

commit 2ab4f4018cb6b8010ca5002c3bdc37783b5d28c2 upstream.

When mailboxes are used as a transport it is possible to setup the SCMI
transport layer, depending on the underlying channels configuration, to use
one or two mailboxes, associated, respectively, to one or two, distinct,
shared memory areas: any other combination should be treated as invalid.

Add more strict checking of SCMI mailbox transport device node descriptors.

Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type")
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230307162324.891866-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/arm_scmi/mailbox.c |   37 ++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

--- a/drivers/firmware/arm_scmi/mailbox.c
+++ b/drivers/firmware/arm_scmi/mailbox.c
@@ -52,6 +52,39 @@ static bool mailbox_chan_available(struc
 					   "#mbox-cells", idx, NULL);
 }
 
+static int mailbox_chan_validate(struct device *cdev)
+{
+	int num_mb, num_sh, ret = 0;
+	struct device_node *np = cdev->of_node;
+
+	num_mb = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
+	num_sh = of_count_phandle_with_args(np, "shmem", NULL);
+	/* Bail out if mboxes and shmem descriptors are inconsistent */
+	if (num_mb <= 0 || num_sh > 2 || num_mb != num_sh) {
+		dev_warn(cdev, "Invalid channel descriptor for '%s'\n",
+			 of_node_full_name(np));
+		return -EINVAL;
+	}
+
+	if (num_sh > 1) {
+		struct device_node *np_tx, *np_rx;
+
+		np_tx = of_parse_phandle(np, "shmem", 0);
+		np_rx = of_parse_phandle(np, "shmem", 1);
+		/* SCMI Tx and Rx shared mem areas have to be distinct */
+		if (!np_tx || !np_rx || np_tx == np_rx) {
+			dev_warn(cdev, "Invalid shmem descriptor for '%s'\n",
+				 of_node_full_name(np));
+			ret = -EINVAL;
+		}
+
+		of_node_put(np_tx);
+		of_node_put(np_rx);
+	}
+
+	return ret;
+}
+
 static int mailbox_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
 			      bool tx)
 {
@@ -64,6 +97,10 @@ static int mailbox_chan_setup(struct scm
 	resource_size_t size;
 	struct resource res;
 
+	ret = mailbox_chan_validate(cdev);
+	if (ret)
+		return ret;
+
 	smbox = devm_kzalloc(dev, sizeof(*smbox), GFP_KERNEL);
 	if (!smbox)
 		return -ENOMEM;

[PATCH 6.1 210/224] arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent

[Greg Kroah-Hartman]

From: Krishna chaitanya chundru <quic_krichai@quicinc.com>

commit 8a63441e83724fee1ef3fd37b237d40d90780766 upstream.

If the controller is not marked as cache coherent, then kernel will
try to ensure coherency during dma-ops and that may cause data corruption.
So, mark the PCIe node as dma-coherent as the devices on PCIe bus are
cache coherent.

Cc: stable@vger.kernel.org
Fixes: 92e0ee9f83b3 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related node")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1677584952-17496-1-git-send-email-quic_krichai@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2077,6 +2077,8 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_clkreq_n>;
 
+			dma-coherent;
+
 			iommus = <&apps_smmu 0x1c80 0x1>;
 
 			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,

[PATCH 6.1 211/224] arm64: dts: qcom: sm8150: Fix the iommu mask used for PCIe controllers

[Greg Kroah-Hartman]

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

commit 672a58fc7c477e59981653a11241566870fff852 upstream.

The iommu mask should be 0x3f as per Qualcomm internal documentation.
Without the correct mask, the PCIe transactions from the endpoint will
result in SMMU faults. Hence, fix it!

Cc: stable@vger.kernel.org # 5.19
Fixes: a1c86c680533 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230224080045.6577-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1810,7 +1810,7 @@
 				      "slave_q2a",
 				      "tbu";
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
+			iommus = <&apps_smmu 0x1d80 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1909,7 +1909,7 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
+			iommus = <&apps_smmu 0x1e00 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 

[PATCH 6.1 212/224] soc: qcom: llcc: Fix slice configuration values for SC8280XP

[Greg Kroah-Hartman]

From: Abel Vesa <abel.vesa@linaro.org>

commit 77bf4b3ed42e31d29b255fcd6530fb7a1e217e89 upstream.

The slice IDs for CVPFW, CPUSS1 and CPUWHT currently overflow the 32bit
LLCC config registers, which means it is writing beyond the upper limit
of the ATTR0_CFGn and ATTR1_CFGn range of registers. But the most obvious
impact is the fact that the mentioned slices do not get configured at all,
which will result in reduced performance. Fix that by using the slice ID
values taken from the latest LLCC SC table.

Fixes: ec69dfbdc426 ("soc: qcom: llcc: Add sc8180x and sc8280xp configurations")
Cc: stable@vger.kernel.org	# 5.19+
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306135527.509796-1-abel.vesa@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/soc/qcom/llcc-qcom.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -170,9 +170,9 @@ static const struct llcc_slice_config sc
 	{ LLCC_CVP,      28, 512,  3, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
 	{ LLCC_APTCM,    30, 1024, 3, 1, 0x0,   0x1, 1, 0, 0, 1, 0, 0 },
 	{ LLCC_WRCACHE,  31, 1024, 1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
-	{ LLCC_CVPFW,    32, 512,  1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
-	{ LLCC_CPUSS1,   33, 2048, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
-	{ LLCC_CPUHWT,   36, 512,  1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
+	{ LLCC_CVPFW,    17, 512,  1, 0, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_CPUSS1,   3, 2048, 1, 1, 0xfff, 0x0, 0, 0, 0, 1, 0, 0 },
+	{ LLCC_CPUHWT,   5, 512,  1, 1, 0xfff, 0x0, 0, 0, 0, 0, 1, 0 },
 };
 
 static const struct llcc_slice_config sdm845_data[] =  {

[PATCH 6.1 213/224] mm/ksm: fix race with VMA iteration and mm_struct teardown

[Greg Kroah-Hartman]

From: Liam R. Howlett <Liam.Howlett@oracle.com>

commit 6db504ce55bdbc575723938fc480713c9183f6a2 upstream.

exit_mmap() will tear down the VMAs and maple tree with the mmap_lock held
in write mode.  Ensure that the maple tree is still valid by checking
ksm_test_exit() after taking the mmap_lock in read mode, but before the
for_each_vma() iterator dereferences a destroyed maple tree.

Since the maple tree is destroyed, the flags telling lockdep to check an
external lock has been cleared.  Skip the for_each_vma() iterator to avoid
dereferencing a maple tree without the external lock flag, which would
create a lockdep warning.

Link: https://lkml.kernel.org/r/20230308220310.3119196-1-Liam.Howlett@oracle.com
Fixes: a5f18ba07276 ("mm/ksm: use vma iterators instead of vma linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
  Link: https://lore.kernel.org/lkml/ZAdUUhSbaa6fHS36@xpf.sh.intel.com/
Reported-by: syzbot+2ee18845e89ae76342c5@syzkaller.appspotmail.com
  Link: https://syzkaller.appspot.com/bug?id=64a3e95957cd3deab99df7cd7b5a9475af92c93e
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <heng.su@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/ksm.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -960,9 +960,15 @@ static int unmerge_and_remove_all_rmap_i
 
 		mm = mm_slot->slot.mm;
 		mmap_read_lock(mm);
+
+		/*
+		 * Exit right away if mm is exiting to avoid lockdep issue in
+		 * the maple tree
+		 */
+		if (ksm_test_exit(mm))
+			goto mm_exiting;
+
 		for_each_vma(vmi, vma) {
-			if (ksm_test_exit(mm))
-				break;
 			if (!(vma->vm_flags & VM_MERGEABLE) || !vma->anon_vma)
 				continue;
 			err = unmerge_ksm_pages(vma,
@@ -971,6 +977,7 @@ static int unmerge_and_remove_all_rmap_i
 				goto error;
 		}
 
+mm_exiting:
 		remove_trailing_rmap_items(&mm_slot->rmap_list);
 		mmap_read_unlock(mm);
 

[PATCH 6.1 214/224] bus: imx-weim: fix branch condition evaluates to a garbage value

[Greg Kroah-Hartman]

From: Ivan Bornyakov <i.bornyakov@metrotek.ru>

commit 1adab2922c58e7ff4fa9f0b43695079402cce876 upstream.

If bus type is other than imx50_weim_devtype and have no child devices,
variable 'ret' in function weim_parse_dt() will not be initialized, but
will be used as branch condition and return value. Fix this by
initializing 'ret' with 0.

This was discovered with help of clang-analyzer, but the situation is
quite possible in real life.

Fixes: 52c47b63412b ("bus: imx-weim: improve error handling upon child probe-failure")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bus/imx-weim.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -204,8 +204,8 @@ static int weim_parse_dt(struct platform
 	const struct of_device_id *of_id = of_match_device(weim_id_table,
 							   &pdev->dev);
 	const struct imx_weim_devtype *devtype = of_id->data;
+	int ret = 0, have_child = 0;
 	struct device_node *child;
-	int ret, have_child = 0;
 	struct weim_priv *priv;
 	void __iomem *base;
 	u32 reg;

[PATCH 6.1 215/224] i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()

[Greg Kroah-Hartman]

From: Wei Chen <harperchen1110@gmail.com>

commit 92fbb6d1296f81f41f65effd7f5f8c0f74943d15 upstream.

The data->block[0] variable comes from user and is a number between
0-255. Without proper check, the variable may be very large to cause
an out-of-bounds when performing memcpy in slimpro_i2c_blkwr.

Fix this bug by checking the value of writelen.

Fixes: f6505fbabc42 ("i2c: add SLIMpro I2C device driver on APM X-Gene platform")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-xgene-slimpro.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/i2c/busses/i2c-xgene-slimpro.c
+++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
@@ -308,6 +308,9 @@ static int slimpro_i2c_blkwr(struct slim
 	u32 msg[3];
 	int rc;
 
+	if (writelen > I2C_SMBUS_BLOCK_MAX)
+		return -EINVAL;
+
 	memcpy(ctx->dma_buffer, data, writelen);
 	paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen,
 			       DMA_TO_DEVICE);

[PATCH 6.1 216/224] dm stats: check for and propagate alloc_percpu failure

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

commit d3aa3e060c4a80827eb801fc448debc9daa7c46b upstream.

Check alloc_precpu()'s return value and return an error from
dm_stats_init() if it fails. Update alloc_dev() to fail if
dm_stats_init() does.

Otherwise, a NULL pointer dereference will occur in dm_stats_cleanup()
even if dm-stats isn't being actively used.

Fixes: fd2ed4d25270 ("dm: add statistics support")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-stats.c |    7 ++++++-
 drivers/md/dm-stats.h |    2 +-
 drivers/md/dm.c       |    4 +++-
 3 files changed, 10 insertions(+), 3 deletions(-)

--- a/drivers/md/dm-stats.c
+++ b/drivers/md/dm-stats.c
@@ -188,7 +188,7 @@ static int dm_stat_in_flight(struct dm_s
 	       atomic_read(&shared->in_flight[WRITE]);
 }
 
-void dm_stats_init(struct dm_stats *stats)
+int dm_stats_init(struct dm_stats *stats)
 {
 	int cpu;
 	struct dm_stats_last_position *last;
@@ -197,11 +197,16 @@ void dm_stats_init(struct dm_stats *stat
 	INIT_LIST_HEAD(&stats->list);
 	stats->precise_timestamps = false;
 	stats->last = alloc_percpu(struct dm_stats_last_position);
+	if (!stats->last)
+		return -ENOMEM;
+
 	for_each_possible_cpu(cpu) {
 		last = per_cpu_ptr(stats->last, cpu);
 		last->last_sector = (sector_t)ULLONG_MAX;
 		last->last_rw = UINT_MAX;
 	}
+
+	return 0;
 }
 
 void dm_stats_cleanup(struct dm_stats *stats)
--- a/drivers/md/dm-stats.h
+++ b/drivers/md/dm-stats.h
@@ -21,7 +21,7 @@ struct dm_stats_aux {
 	unsigned long long duration_ns;
 };
 
-void dm_stats_init(struct dm_stats *st);
+int dm_stats_init(struct dm_stats *st);
 void dm_stats_cleanup(struct dm_stats *st);
 
 struct mapped_device;
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2105,7 +2105,9 @@ static struct mapped_device *alloc_dev(i
 	if (!md->pending_io)
 		goto bad;
 
-	dm_stats_init(&md->stats);
+	r = dm_stats_init(&md->stats);
+	if (r < 0)
+		goto bad;
 
 	/* Populate the mapping, nobody knows we exist yet */
 	spin_lock(&_minor_lock);

[PATCH 6.1 217/224] dm crypt: add cond_resched() to dmcrypt_write()

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit fb294b1c0ba982144ca467a75e7d01ff26304e2b upstream.

The loop in dmcrypt_write may be running for unbounded amount of time,
thus we need cond_resched() in it.

This commit fixes the following warning:

[ 3391.153255][   C12] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [dmcrypt_write/2:2897]
...
[ 3391.387210][   C12] Call trace:
[ 3391.390338][   C12]  blk_attempt_bio_merge.part.6+0x38/0x158
[ 3391.395970][   C12]  blk_attempt_plug_merge+0xc0/0x1b0
[ 3391.401085][   C12]  blk_mq_submit_bio+0x398/0x550
[ 3391.405856][   C12]  submit_bio_noacct+0x308/0x380
[ 3391.410630][   C12]  dmcrypt_write+0x1e4/0x208 [dm_crypt]
[ 3391.416005][   C12]  kthread+0x130/0x138
[ 3391.419911][   C12]  ret_from_fork+0x10/0x18

Reported-by: yangerkun <yangerkun@huawei.com>
Fixes: dc2676210c42 ("dm crypt: offload writes to thread")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-crypt.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1933,6 +1933,7 @@ pop_from_list:
 			io = crypt_io_from_node(rb_first(&write_tree));
 			rb_erase(&io->rb_node, &write_tree);
 			kcryptd_io_write(io);
+			cond_resched();
 		} while (!RB_EMPTY_ROOT(&write_tree));
 		blk_finish_plug(&plug);
 	}

[PATCH 6.1 218/224] dm crypt: avoid accessing uninitialized tasklet

[Greg Kroah-Hartman]

From: Mike Snitzer <snitzer@kernel.org>

commit d9a02e016aaf5a57fb44e9a5e6da8ccd3b9e2e70 upstream.

When neither "no_read_workqueue" nor "no_write_workqueue" are enabled,
tasklet_trylock() in crypt_dec_pending() may still return false due to
an uninitialized state, and dm-crypt will unnecessarily do io completion
in io_queue workqueue instead of current context.

Fix this by adding an 'in_tasklet' flag to dm_crypt_io struct and
initialize it to false in crypt_io_init(). Set this flag to true in
kcryptd_queue_crypt() before calling tasklet_schedule(). If set
crypt_dec_pending() will punt io completion to a workqueue.

This also nicely avoids the tasklet_trylock/unlock hack when tasklets
aren't in use.

Fixes: 8e14f610159d ("dm crypt: do not call bio_endio() from the dm-crypt tasklet")
Cc: stable@vger.kernel.org
Reported-by: Hou Tao <houtao1@huawei.com>
Suggested-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-crypt.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -71,7 +71,9 @@ struct dm_crypt_io {
 	struct crypt_config *cc;
 	struct bio *base_bio;
 	u8 *integrity_metadata;
-	bool integrity_metadata_from_pool;
+	bool integrity_metadata_from_pool:1;
+	bool in_tasklet:1;
+
 	struct work_struct work;
 	struct tasklet_struct tasklet;
 
@@ -1728,6 +1730,7 @@ static void crypt_io_init(struct dm_cryp
 	io->ctx.r.req = NULL;
 	io->integrity_metadata = NULL;
 	io->integrity_metadata_from_pool = false;
+	io->in_tasklet = false;
 	atomic_set(&io->io_pending, 0);
 }
 
@@ -1773,14 +1776,13 @@ static void crypt_dec_pending(struct dm_
 	 * our tasklet. In this case we need to delay bio_endio()
 	 * execution to after the tasklet is done and dequeued.
 	 */
-	if (tasklet_trylock(&io->tasklet)) {
-		tasklet_unlock(&io->tasklet);
-		bio_endio(base_bio);
+	if (io->in_tasklet) {
+		INIT_WORK(&io->work, kcryptd_io_bio_endio);
+		queue_work(cc->io_queue, &io->work);
 		return;
 	}
 
-	INIT_WORK(&io->work, kcryptd_io_bio_endio);
-	queue_work(cc->io_queue, &io->work);
+	bio_endio(base_bio);
 }
 
 /*
@@ -2229,6 +2231,7 @@ static void kcryptd_queue_crypt(struct d
 		 * it is being executed with irqs disabled.
 		 */
 		if (in_hardirq() || irqs_disabled()) {
+			io->in_tasklet = true;
 			tasklet_init(&io->tasklet, kcryptd_crypt_tasklet, (unsigned long)&io->work);
 			tasklet_schedule(&io->tasklet);
 			return;

[PATCH 6.1 219/224] sched/fair: sanitize vruntime of entity being placed

[Greg Kroah-Hartman]

From: Zhang Qiao <zhangqiao22@huawei.com>

commit 829c1651e9c4a6f78398d3e67651cef9bb6b42cc upstream.

When a scheduling entity is placed onto cfs_rq, its vruntime is pulled
to the base level (around cfs_rq->min_vruntime), so that the entity
doesn't gain extra boost when placed backwards.

However, if the entity being placed wasn't executed for a long time, its
vruntime may get too far behind (e.g. while cfs_rq was executing a
low-weight hog), which can inverse the vruntime comparison due to s64
overflow.  This results in the entity being placed with its original
vruntime way forwards, so that it will effectively never get to the cpu.

To prevent that, ignore the vruntime of the entity being placed if it
didn't execute for much longer than the characteristic sheduler time
scale.

[rkagan: formatted, adjusted commit log, comments, cutoff value]
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Co-developed-by: Roman Kagan <rkagan@amazon.de>
Signed-off-by: Roman Kagan <rkagan@amazon.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230130122216.3555094-1-rkagan@amazon.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/sched/fair.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4640,6 +4640,7 @@ static void
 place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial)
 {
 	u64 vruntime = cfs_rq->min_vruntime;
+	u64 sleep_time;
 
 	/*
 	 * The 'current' period is already promised to the current tasks,
@@ -4669,8 +4670,18 @@ place_entity(struct cfs_rq *cfs_rq, stru
 		vruntime -= thresh;
 	}
 
-	/* ensure we never gain time by being placed backwards. */
-	se->vruntime = max_vruntime(se->vruntime, vruntime);
+	/*
+	 * Pull vruntime of the entity being placed to the base level of
+	 * cfs_rq, to prevent boosting it if placed backwards.  If the entity
+	 * slept for a long time, don't even try to compare its vruntime with
+	 * the base as it may be too far off and the comparison may get
+	 * inversed due to s64 overflow.
+	 */
+	sleep_time = rq_clock_task(rq_of(cfs_rq)) - se->exec_start;
+	if ((s64)sleep_time > 60LL * NSEC_PER_SEC)
+		se->vruntime = vruntime;
+	else
+		se->vruntime = max_vruntime(se->vruntime, vruntime);
 }
 
 static void check_enqueue_throttle(struct cfs_rq *cfs_rq);

[PATCH 6.1 220/224] sched/fair: Sanitize vruntime of entity being migrated

[Greg Kroah-Hartman]

From: Vincent Guittot <vincent.guittot@linaro.org>

commit a53ce18cacb477dd0513c607f187d16f0fa96f71 upstream.

Commit 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed")
fixes an overflowing bug, but ignore a case that se->exec_start is reset
after a migration.

For fixing this case, we delay the reset of se->exec_start after
placing the entity which se->exec_start to detect long sleeping task.

In order to take into account a possible divergence between the clock_task
of 2 rqs, we increase the threshold to around 104 days.

Fixes: 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed")
Originally-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Qiao <zhangqiao22@huawei.com>
Link: https://lore.kernel.org/r/20230317160810.107988-1-vincent.guittot@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/sched/core.c |    3 ++
 kernel/sched/fair.c |   53 ++++++++++++++++++++++++++++++++++++++++++----------
 2 files changed, 46 insertions(+), 10 deletions(-)

--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2082,6 +2082,9 @@ static inline void dequeue_task(struct r
 
 void activate_task(struct rq *rq, struct task_struct *p, int flags)
 {
+	if (task_on_rq_migrating(p))
+		flags |= ENQUEUE_MIGRATED;
+
 	enqueue_task(rq, p, flags);
 
 	p->on_rq = TASK_ON_RQ_QUEUED;
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -4636,11 +4636,33 @@ static void check_spread(struct cfs_rq *
 #endif
 }
 
+static inline bool entity_is_long_sleeper(struct sched_entity *se)
+{
+	struct cfs_rq *cfs_rq;
+	u64 sleep_time;
+
+	if (se->exec_start == 0)
+		return false;
+
+	cfs_rq = cfs_rq_of(se);
+
+	sleep_time = rq_clock_task(rq_of(cfs_rq));
+
+	/* Happen while migrating because of clock task divergence */
+	if (sleep_time <= se->exec_start)
+		return false;
+
+	sleep_time -= se->exec_start;
+	if (sleep_time > ((1ULL << 63) / scale_load_down(NICE_0_LOAD)))
+		return true;
+
+	return false;
+}
+
 static void
 place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial)
 {
 	u64 vruntime = cfs_rq->min_vruntime;
-	u64 sleep_time;
 
 	/*
 	 * The 'current' period is already promised to the current tasks,
@@ -4672,13 +4694,24 @@ place_entity(struct cfs_rq *cfs_rq, stru
 
 	/*
 	 * Pull vruntime of the entity being placed to the base level of
-	 * cfs_rq, to prevent boosting it if placed backwards.  If the entity
-	 * slept for a long time, don't even try to compare its vruntime with
-	 * the base as it may be too far off and the comparison may get
-	 * inversed due to s64 overflow.
+	 * cfs_rq, to prevent boosting it if placed backwards.
+	 * However, min_vruntime can advance much faster than real time, with
+	 * the extreme being when an entity with the minimal weight always runs
+	 * on the cfs_rq. If the waking entity slept for a long time, its
+	 * vruntime difference from min_vruntime may overflow s64 and their
+	 * comparison may get inversed, so ignore the entity's original
+	 * vruntime in that case.
+	 * The maximal vruntime speedup is given by the ratio of normal to
+	 * minimal weight: scale_load_down(NICE_0_LOAD) / MIN_SHARES.
+	 * When placing a migrated waking entity, its exec_start has been set
+	 * from a different rq. In order to take into account a possible
+	 * divergence between new and prev rq's clocks task because of irq and
+	 * stolen time, we take an additional margin.
+	 * So, cutting off on the sleep time of
+	 *     2^63 / scale_load_down(NICE_0_LOAD) ~ 104 days
+	 * should be safe.
 	 */
-	sleep_time = rq_clock_task(rq_of(cfs_rq)) - se->exec_start;
-	if ((s64)sleep_time > 60LL * NSEC_PER_SEC)
+	if (entity_is_long_sleeper(se))
 		se->vruntime = vruntime;
 	else
 		se->vruntime = max_vruntime(se->vruntime, vruntime);
@@ -4758,6 +4791,9 @@ enqueue_entity(struct cfs_rq *cfs_rq, st
 
 	if (flags & ENQUEUE_WAKEUP)
 		place_entity(cfs_rq, se, 0);
+	/* Entity has migrated, no longer consider this task hot */
+	if (flags & ENQUEUE_MIGRATED)
+		se->exec_start = 0;
 
 	check_schedstat_required();
 	update_stats_enqueue_fair(cfs_rq, se, flags);
@@ -7460,9 +7496,6 @@ static void migrate_task_rq_fair(struct
 	/* Tell new CPU we are migrated */
 	se->avg.last_update_time = 0;
 
-	/* We have migrated, no longer consider this task hot */
-	se->exec_start = 0;
-
 	update_scan_period(p, new_cpu);
 }
 

[PATCH 6.1 221/224] drm/amdkfd: introduce dummy cache info for property asic

[Greg Kroah-Hartman]

From: Prike Liang <Prike.Liang@amd.com>

commit fd72e2cb2f9dd2734e8013b3e185a21f0d605d3e upstream.

This dummy cache info will enable kfd base function support.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_crat.c |   53 +++++++++++++++++++++++++++++++++-
 1 file changed, 52 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
@@ -891,6 +891,54 @@ static struct kfd_gpu_cache_info gc_10_3
 	},
 };
 
+static struct kfd_gpu_cache_info dummy_cache_info[] = {
+	{
+		/* TCP L1 Cache per CU */
+		.cache_size = 16,
+		.cache_level = 1,
+		.flags = (CRAT_CACHE_FLAGS_ENABLED |
+				CRAT_CACHE_FLAGS_DATA_CACHE |
+				CRAT_CACHE_FLAGS_SIMD_CACHE),
+		.num_cu_shared = 1,
+	},
+	{
+		/* Scalar L1 Instruction Cache per SQC */
+		.cache_size = 32,
+		.cache_level = 1,
+		.flags = (CRAT_CACHE_FLAGS_ENABLED |
+				CRAT_CACHE_FLAGS_INST_CACHE |
+				CRAT_CACHE_FLAGS_SIMD_CACHE),
+		.num_cu_shared = 2,
+	},
+	{
+		/* Scalar L1 Data Cache per SQC */
+		.cache_size = 16,
+		.cache_level = 1,
+		.flags = (CRAT_CACHE_FLAGS_ENABLED |
+				CRAT_CACHE_FLAGS_DATA_CACHE |
+				CRAT_CACHE_FLAGS_SIMD_CACHE),
+		.num_cu_shared = 2,
+	},
+	{
+		/* GL1 Data Cache per SA */
+		.cache_size = 128,
+		.cache_level = 1,
+		.flags = (CRAT_CACHE_FLAGS_ENABLED |
+				CRAT_CACHE_FLAGS_DATA_CACHE |
+				CRAT_CACHE_FLAGS_SIMD_CACHE),
+		.num_cu_shared = 6,
+	},
+	{
+		/* L2 Data Cache per GPU (Total Tex Cache) */
+		.cache_size = 2048,
+		.cache_level = 2,
+		.flags = (CRAT_CACHE_FLAGS_ENABLED |
+				CRAT_CACHE_FLAGS_DATA_CACHE |
+				CRAT_CACHE_FLAGS_SIMD_CACHE),
+		.num_cu_shared = 6,
+	},
+};
+
 static void kfd_populated_cu_info_cpu(struct kfd_topology_device *dev,
 		struct crat_subtype_computeunit *cu)
 {
@@ -1630,7 +1678,10 @@ static int kfd_fill_gpu_cache_info(struc
 				kfd_fill_gpu_cache_info_from_gfx_config(kdev, pcache_info);
 			break;
 		default:
-			return -EINVAL;
+			pcache_info = dummy_cache_info;
+			num_of_cache_types = ARRAY_SIZE(dummy_cache_info);
+			pr_warn("dummy cache info is used temporarily and real cache info need update later.\n");
+			break;
 		}
 	}
 

[PATCH 6.1 222/224] drm/amdkfd: Fix the warning of array-index-out-of-bounds

[Greg Kroah-Hartman]

From: Ma Jun <Jun.Ma2@amd.com>

commit c0cc999f3c32e65a7c88fb323893ddf897b24488 upstream.

For some GPUs with more CUs, the original sibling_map[32]
in struct crat_subtype_cache is not enough
to save the cache information when create the VCRAT table,
so skip filling the struct crat_subtype_cache info instead
fill struct kfd_cache_properties directly to fix this problem.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_crat.c     |  312 +++---------------------------
 drivers/gpu/drm/amd/amdkfd/kfd_crat.h     |   12 +
 drivers/gpu/drm/amd/amdkfd/kfd_topology.c |  245 ++++++++++++++++++++++-
 drivers/gpu/drm/amd/amdkfd/kfd_topology.h |    5 
 4 files changed, 282 insertions(+), 292 deletions(-)

--- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
@@ -50,16 +50,6 @@ static inline unsigned int get_and_inc_g
 	return current_id;
 }
 
-/* Static table to describe GPU Cache information */
-struct kfd_gpu_cache_info {
-	uint32_t	cache_size;
-	uint32_t	cache_level;
-	uint32_t	flags;
-	/* Indicates how many Compute Units share this cache
-	 * within a SA. Value = 1 indicates the cache is not shared
-	 */
-	uint32_t	num_cu_shared;
-};
 
 static struct kfd_gpu_cache_info kaveri_cache_info[] = {
 	{
@@ -1119,9 +1109,13 @@ static int kfd_parse_subtype_cache(struc
 			props->cachelines_per_tag = cache->lines_per_tag;
 			props->cache_assoc = cache->associativity;
 			props->cache_latency = cache->cache_latency;
+
 			memcpy(props->sibling_map, cache->sibling_map,
 					sizeof(props->sibling_map));
 
+			/* set the sibling_map_size as 32 for CRAT from ACPI */
+			props->sibling_map_size = CRAT_SIBLINGMAP_SIZE;
+
 			if (cache->flags & CRAT_CACHE_FLAGS_DATA_CACHE)
 				props->cache_type |= HSA_CACHE_TYPE_DATA;
 			if (cache->flags & CRAT_CACHE_FLAGS_INST_CACHE)
@@ -1339,125 +1333,6 @@ err:
 	return ret;
 }
 
-/* Helper function. See kfd_fill_gpu_cache_info for parameter description */
-static int fill_in_l1_pcache(struct crat_subtype_cache *pcache,
-				struct kfd_gpu_cache_info *pcache_info,
-				struct kfd_cu_info *cu_info,
-				int mem_available,
-				int cu_bitmask,
-				int cache_type, unsigned int cu_processor_id,
-				int cu_block)
-{
-	unsigned int cu_sibling_map_mask;
-	int first_active_cu;
-
-	/* First check if enough memory is available */
-	if (sizeof(struct crat_subtype_cache) > mem_available)
-		return -ENOMEM;
-
-	cu_sibling_map_mask = cu_bitmask;
-	cu_sibling_map_mask >>= cu_block;
-	cu_sibling_map_mask &=
-		((1 << pcache_info[cache_type].num_cu_shared) - 1);
-	first_active_cu = ffs(cu_sibling_map_mask);
-
-	/* CU could be inactive. In case of shared cache find the first active
-	 * CU. and incase of non-shared cache check if the CU is inactive. If
-	 * inactive active skip it
-	 */
-	if (first_active_cu) {
-		memset(pcache, 0, sizeof(struct crat_subtype_cache));
-		pcache->type = CRAT_SUBTYPE_CACHE_AFFINITY;
-		pcache->length = sizeof(struct crat_subtype_cache);
-		pcache->flags = pcache_info[cache_type].flags;
-		pcache->processor_id_low = cu_processor_id
-					 + (first_active_cu - 1);
-		pcache->cache_level = pcache_info[cache_type].cache_level;
-		pcache->cache_size = pcache_info[cache_type].cache_size;
-
-		/* Sibling map is w.r.t processor_id_low, so shift out
-		 * inactive CU
-		 */
-		cu_sibling_map_mask =
-			cu_sibling_map_mask >> (first_active_cu - 1);
-
-		pcache->sibling_map[0] = (uint8_t)(cu_sibling_map_mask & 0xFF);
-		pcache->sibling_map[1] =
-				(uint8_t)((cu_sibling_map_mask >> 8) & 0xFF);
-		pcache->sibling_map[2] =
-				(uint8_t)((cu_sibling_map_mask >> 16) & 0xFF);
-		pcache->sibling_map[3] =
-				(uint8_t)((cu_sibling_map_mask >> 24) & 0xFF);
-		return 0;
-	}
-	return 1;
-}
-
-/* Helper function. See kfd_fill_gpu_cache_info for parameter description */
-static int fill_in_l2_l3_pcache(struct crat_subtype_cache *pcache,
-				struct kfd_gpu_cache_info *pcache_info,
-				struct kfd_cu_info *cu_info,
-				int mem_available,
-				int cache_type, unsigned int cu_processor_id)
-{
-	unsigned int cu_sibling_map_mask;
-	int first_active_cu;
-	int i, j, k;
-
-	/* First check if enough memory is available */
-	if (sizeof(struct crat_subtype_cache) > mem_available)
-		return -ENOMEM;
-
-	cu_sibling_map_mask = cu_info->cu_bitmap[0][0];
-	cu_sibling_map_mask &=
-		((1 << pcache_info[cache_type].num_cu_shared) - 1);
-	first_active_cu = ffs(cu_sibling_map_mask);
-
-	/* CU could be inactive. In case of shared cache find the first active
-	 * CU. and incase of non-shared cache check if the CU is inactive. If
-	 * inactive active skip it
-	 */
-	if (first_active_cu) {
-		memset(pcache, 0, sizeof(struct crat_subtype_cache));
-		pcache->type = CRAT_SUBTYPE_CACHE_AFFINITY;
-		pcache->length = sizeof(struct crat_subtype_cache);
-		pcache->flags = pcache_info[cache_type].flags;
-		pcache->processor_id_low = cu_processor_id
-					 + (first_active_cu - 1);
-		pcache->cache_level = pcache_info[cache_type].cache_level;
-		pcache->cache_size = pcache_info[cache_type].cache_size;
-
-		/* Sibling map is w.r.t processor_id_low, so shift out
-		 * inactive CU
-		 */
-		cu_sibling_map_mask =
-			cu_sibling_map_mask >> (first_active_cu - 1);
-		k = 0;
-		for (i = 0; i < cu_info->num_shader_engines; i++) {
-			for (j = 0; j < cu_info->num_shader_arrays_per_engine;
-				j++) {
-				pcache->sibling_map[k] =
-				 (uint8_t)(cu_sibling_map_mask & 0xFF);
-				pcache->sibling_map[k+1] =
-				 (uint8_t)((cu_sibling_map_mask >> 8) & 0xFF);
-				pcache->sibling_map[k+2] =
-				 (uint8_t)((cu_sibling_map_mask >> 16) & 0xFF);
-				pcache->sibling_map[k+3] =
-				 (uint8_t)((cu_sibling_map_mask >> 24) & 0xFF);
-				k += 4;
-				cu_sibling_map_mask =
-					cu_info->cu_bitmap[i % 4][j + i / 4];
-				cu_sibling_map_mask &= (
-				 (1 << pcache_info[cache_type].num_cu_shared)
-				 - 1);
-			}
-		}
-		return 0;
-	}
-	return 1;
-}
-
-#define KFD_MAX_CACHE_TYPES 6
 
 static int kfd_fill_gpu_cache_info_from_gfx_config(struct kfd_dev *kdev,
 						   struct kfd_gpu_cache_info *pcache_info)
@@ -1531,231 +1406,133 @@ static int kfd_fill_gpu_cache_info_from_
 	return i;
 }
 
-/* kfd_fill_gpu_cache_info - Fill GPU cache info using kfd_gpu_cache_info
- * tables
- *
- *	@kdev - [IN] GPU device
- *	@gpu_processor_id - [IN] GPU processor ID to which these caches
- *			    associate
- *	@available_size - [IN] Amount of memory available in pcache
- *	@cu_info - [IN] Compute Unit info obtained from KGD
- *	@pcache - [OUT] memory into which cache data is to be filled in.
- *	@size_filled - [OUT] amount of data used up in pcache.
- *	@num_of_entries - [OUT] number of caches added
- */
-static int kfd_fill_gpu_cache_info(struct kfd_dev *kdev,
-			int gpu_processor_id,
-			int available_size,
-			struct kfd_cu_info *cu_info,
-			struct crat_subtype_cache *pcache,
-			int *size_filled,
-			int *num_of_entries)
+int kfd_get_gpu_cache_info(struct kfd_dev *kdev, struct kfd_gpu_cache_info **pcache_info)
 {
-	struct kfd_gpu_cache_info *pcache_info;
-	struct kfd_gpu_cache_info cache_info[KFD_MAX_CACHE_TYPES];
 	int num_of_cache_types = 0;
-	int i, j, k;
-	int ct = 0;
-	int mem_available = available_size;
-	unsigned int cu_processor_id;
-	int ret;
-	unsigned int num_cu_shared;
 
 	switch (kdev->adev->asic_type) {
 	case CHIP_KAVERI:
-		pcache_info = kaveri_cache_info;
+		*pcache_info = kaveri_cache_info;
 		num_of_cache_types = ARRAY_SIZE(kaveri_cache_info);
 		break;
 	case CHIP_HAWAII:
-		pcache_info = hawaii_cache_info;
+		*pcache_info = hawaii_cache_info;
 		num_of_cache_types = ARRAY_SIZE(hawaii_cache_info);
 		break;
 	case CHIP_CARRIZO:
-		pcache_info = carrizo_cache_info;
+		*pcache_info = carrizo_cache_info;
 		num_of_cache_types = ARRAY_SIZE(carrizo_cache_info);
 		break;
 	case CHIP_TONGA:
-		pcache_info = tonga_cache_info;
+		*pcache_info = tonga_cache_info;
 		num_of_cache_types = ARRAY_SIZE(tonga_cache_info);
 		break;
 	case CHIP_FIJI:
-		pcache_info = fiji_cache_info;
+		*pcache_info = fiji_cache_info;
 		num_of_cache_types = ARRAY_SIZE(fiji_cache_info);
 		break;
 	case CHIP_POLARIS10:
-		pcache_info = polaris10_cache_info;
+		*pcache_info = polaris10_cache_info;
 		num_of_cache_types = ARRAY_SIZE(polaris10_cache_info);
 		break;
 	case CHIP_POLARIS11:
-		pcache_info = polaris11_cache_info;
+		*pcache_info = polaris11_cache_info;
 		num_of_cache_types = ARRAY_SIZE(polaris11_cache_info);
 		break;
 	case CHIP_POLARIS12:
-		pcache_info = polaris12_cache_info;
+		*pcache_info = polaris12_cache_info;
 		num_of_cache_types = ARRAY_SIZE(polaris12_cache_info);
 		break;
 	case CHIP_VEGAM:
-		pcache_info = vegam_cache_info;
+		*pcache_info = vegam_cache_info;
 		num_of_cache_types = ARRAY_SIZE(vegam_cache_info);
 		break;
 	default:
 		switch (KFD_GC_VERSION(kdev)) {
 		case IP_VERSION(9, 0, 1):
-			pcache_info = vega10_cache_info;
+			*pcache_info = vega10_cache_info;
 			num_of_cache_types = ARRAY_SIZE(vega10_cache_info);
 			break;
 		case IP_VERSION(9, 2, 1):
-			pcache_info = vega12_cache_info;
+			*pcache_info = vega12_cache_info;
 			num_of_cache_types = ARRAY_SIZE(vega12_cache_info);
 			break;
 		case IP_VERSION(9, 4, 0):
 		case IP_VERSION(9, 4, 1):
-			pcache_info = vega20_cache_info;
+			*pcache_info = vega20_cache_info;
 			num_of_cache_types = ARRAY_SIZE(vega20_cache_info);
 			break;
 		case IP_VERSION(9, 4, 2):
-			pcache_info = aldebaran_cache_info;
+			*pcache_info = aldebaran_cache_info;
 			num_of_cache_types = ARRAY_SIZE(aldebaran_cache_info);
 			break;
 		case IP_VERSION(9, 1, 0):
 		case IP_VERSION(9, 2, 2):
-			pcache_info = raven_cache_info;
+			*pcache_info = raven_cache_info;
 			num_of_cache_types = ARRAY_SIZE(raven_cache_info);
 			break;
 		case IP_VERSION(9, 3, 0):
-			pcache_info = renoir_cache_info;
+			*pcache_info = renoir_cache_info;
 			num_of_cache_types = ARRAY_SIZE(renoir_cache_info);
 			break;
 		case IP_VERSION(10, 1, 10):
 		case IP_VERSION(10, 1, 2):
 		case IP_VERSION(10, 1, 3):
 		case IP_VERSION(10, 1, 4):
-			pcache_info = navi10_cache_info;
+			*pcache_info = navi10_cache_info;
 			num_of_cache_types = ARRAY_SIZE(navi10_cache_info);
 			break;
 		case IP_VERSION(10, 1, 1):
-			pcache_info = navi14_cache_info;
+			*pcache_info = navi14_cache_info;
 			num_of_cache_types = ARRAY_SIZE(navi14_cache_info);
 			break;
 		case IP_VERSION(10, 3, 0):
-			pcache_info = sienna_cichlid_cache_info;
+			*pcache_info = sienna_cichlid_cache_info;
 			num_of_cache_types = ARRAY_SIZE(sienna_cichlid_cache_info);
 			break;
 		case IP_VERSION(10, 3, 2):
-			pcache_info = navy_flounder_cache_info;
+			*pcache_info = navy_flounder_cache_info;
 			num_of_cache_types = ARRAY_SIZE(navy_flounder_cache_info);
 			break;
 		case IP_VERSION(10, 3, 4):
-			pcache_info = dimgrey_cavefish_cache_info;
+			*pcache_info = dimgrey_cavefish_cache_info;
 			num_of_cache_types = ARRAY_SIZE(dimgrey_cavefish_cache_info);
 			break;
 		case IP_VERSION(10, 3, 1):
-			pcache_info = vangogh_cache_info;
+			*pcache_info = vangogh_cache_info;
 			num_of_cache_types = ARRAY_SIZE(vangogh_cache_info);
 			break;
 		case IP_VERSION(10, 3, 5):
-			pcache_info = beige_goby_cache_info;
+			*pcache_info = beige_goby_cache_info;
 			num_of_cache_types = ARRAY_SIZE(beige_goby_cache_info);
 			break;
 		case IP_VERSION(10, 3, 3):
-			pcache_info = yellow_carp_cache_info;
+			*pcache_info = yellow_carp_cache_info;
 			num_of_cache_types = ARRAY_SIZE(yellow_carp_cache_info);
 			break;
 		case IP_VERSION(10, 3, 6):
-			pcache_info = gc_10_3_6_cache_info;
+			*pcache_info = gc_10_3_6_cache_info;
 			num_of_cache_types = ARRAY_SIZE(gc_10_3_6_cache_info);
 			break;
 		case IP_VERSION(10, 3, 7):
-			pcache_info = gfx1037_cache_info;
+			*pcache_info = gfx1037_cache_info;
 			num_of_cache_types = ARRAY_SIZE(gfx1037_cache_info);
 			break;
 		case IP_VERSION(11, 0, 0):
 		case IP_VERSION(11, 0, 1):
 		case IP_VERSION(11, 0, 2):
 		case IP_VERSION(11, 0, 3):
-			pcache_info = cache_info;
 			num_of_cache_types =
-				kfd_fill_gpu_cache_info_from_gfx_config(kdev, pcache_info);
+				kfd_fill_gpu_cache_info_from_gfx_config(kdev, *pcache_info);
 			break;
 		default:
-			pcache_info = dummy_cache_info;
+			*pcache_info = dummy_cache_info;
 			num_of_cache_types = ARRAY_SIZE(dummy_cache_info);
 			pr_warn("dummy cache info is used temporarily and real cache info need update later.\n");
 			break;
 		}
 	}
-
-	*size_filled = 0;
-	*num_of_entries = 0;
-
-	/* For each type of cache listed in the kfd_gpu_cache_info table,
-	 * go through all available Compute Units.
-	 * The [i,j,k] loop will
-	 *		if kfd_gpu_cache_info.num_cu_shared = 1
-	 *			will parse through all available CU
-	 *		If (kfd_gpu_cache_info.num_cu_shared != 1)
-	 *			then it will consider only one CU from
-	 *			the shared unit
-	 */
-
-	for (ct = 0; ct < num_of_cache_types; ct++) {
-	  cu_processor_id = gpu_processor_id;
-	  if (pcache_info[ct].cache_level == 1) {
-	    for (i = 0; i < cu_info->num_shader_engines; i++) {
-	      for (j = 0; j < cu_info->num_shader_arrays_per_engine; j++) {
-	        for (k = 0; k < cu_info->num_cu_per_sh;
-		  k += pcache_info[ct].num_cu_shared) {
-		  ret = fill_in_l1_pcache(pcache,
-					pcache_info,
-					cu_info,
-					mem_available,
-					cu_info->cu_bitmap[i % 4][j + i / 4],
-					ct,
-					cu_processor_id,
-					k);
-
-		  if (ret < 0)
-			break;
-
-		  if (!ret) {
-				pcache++;
-				(*num_of_entries)++;
-				mem_available -= sizeof(*pcache);
-				(*size_filled) += sizeof(*pcache);
-		  }
-
-		  /* Move to next CU block */
-		  num_cu_shared = ((k + pcache_info[ct].num_cu_shared) <=
-					cu_info->num_cu_per_sh) ?
-					pcache_info[ct].num_cu_shared :
-					(cu_info->num_cu_per_sh - k);
-		  cu_processor_id += num_cu_shared;
-		}
-	      }
-	    }
-	  } else {
-			ret = fill_in_l2_l3_pcache(pcache,
-				pcache_info,
-				cu_info,
-				mem_available,
-				ct,
-				cu_processor_id);
-
-			if (ret < 0)
-				break;
-
-			if (!ret) {
-				pcache++;
-				(*num_of_entries)++;
-				mem_available -= sizeof(*pcache);
-				(*size_filled) += sizeof(*pcache);
-			}
-	  }
-	}
-
-	pr_debug("Added [%d] GPU cache entries\n", *num_of_entries);
-
-	return 0;
+	return num_of_cache_types;
 }
 
 static bool kfd_ignore_crat(void)
@@ -2314,8 +2091,6 @@ static int kfd_create_vcrat_image_gpu(vo
 	struct kfd_cu_info cu_info;
 	int avail_size = *size;
 	uint32_t total_num_of_cu;
-	int num_of_cache_entries = 0;
-	int cache_mem_filled = 0;
 	uint32_t nid = 0;
 	int ret = 0;
 
@@ -2416,31 +2191,12 @@ static int kfd_create_vcrat_image_gpu(vo
 	crat_table->length += sizeof(struct crat_subtype_memory);
 	crat_table->total_entries++;
 
-	/* TODO: Fill in cache information. This information is NOT readily
-	 * available in KGD
-	 */
-	sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
-		sub_type_hdr->length);
-	ret = kfd_fill_gpu_cache_info(kdev, cu->processor_id_low,
-				avail_size,
-				&cu_info,
-				(struct crat_subtype_cache *)sub_type_hdr,
-				&cache_mem_filled,
-				&num_of_cache_entries);
-
-	if (ret < 0)
-		return ret;
-
-	crat_table->length += cache_mem_filled;
-	crat_table->total_entries += num_of_cache_entries;
-	avail_size -= cache_mem_filled;
-
 	/* Fill in Subtype: IO_LINKS
 	 *  Only direct links are added here which is Link from GPU to
 	 *  its NUMA node. Indirect links are added by userspace.
 	 */
 	sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
-		cache_mem_filled);
+		sub_type_hdr->length);
 	ret = kfd_fill_gpu_direct_io_link_to_cpu(&avail_size, kdev,
 		(struct crat_subtype_iolink *)sub_type_hdr, proximity_domain);
 
--- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.h
@@ -317,6 +317,18 @@ struct cdit_header {
 
 struct kfd_dev;
 
+/* Static table to describe GPU Cache information */
+struct kfd_gpu_cache_info {
+	uint32_t	cache_size;
+	uint32_t	cache_level;
+	uint32_t	flags;
+	/* Indicates how many Compute Units share this cache
+	 * within a SA. Value = 1 indicates the cache is not shared
+	 */
+	uint32_t	num_cu_shared;
+};
+int kfd_get_gpu_cache_info(struct kfd_dev *kdev, struct kfd_gpu_cache_info **pcache_info);
+
 int kfd_create_crat_image_acpi(void **crat_image, size_t *size);
 void kfd_destroy_crat_image(void *crat_image);
 int kfd_parse_crat_table(void *crat_image, struct list_head *device_list,
--- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
@@ -364,7 +364,6 @@ static ssize_t kfd_cache_show(struct kob
 
 	/* Making sure that the buffer is an empty string */
 	buffer[0] = 0;
-
 	cache = container_of(attr, struct kfd_cache_properties, attr);
 	if (cache->gpu && kfd_devcgroup_check_permission(cache->gpu))
 		return -EPERM;
@@ -379,12 +378,13 @@ static ssize_t kfd_cache_show(struct kob
 	sysfs_show_32bit_prop(buffer, offs, "association", cache->cache_assoc);
 	sysfs_show_32bit_prop(buffer, offs, "latency", cache->cache_latency);
 	sysfs_show_32bit_prop(buffer, offs, "type", cache->cache_type);
+
 	offs += snprintf(buffer+offs, PAGE_SIZE-offs, "sibling_map ");
-	for (i = 0; i < CRAT_SIBLINGMAP_SIZE; i++)
+	for (i = 0; i < cache->sibling_map_size; i++)
 		for (j = 0; j < sizeof(cache->sibling_map[0])*8; j++)
 			/* Check each bit */
 			offs += snprintf(buffer+offs, PAGE_SIZE-offs, "%d,",
-					 (cache->sibling_map[i] >> j) & 1);
+						(cache->sibling_map[i] >> j) & 1);
 
 	/* Replace the last "," with end of line */
 	buffer[offs-1] = '\n';
@@ -1198,7 +1198,6 @@ static struct kfd_topology_device *kfd_a
 	struct kfd_iolink_properties *iolink;
 	struct kfd_iolink_properties *p2plink;
 
-	down_write(&topology_lock);
 	list_for_each_entry(dev, &topology_device_list, list) {
 		/* Discrete GPUs need their own topology device list
 		 * entries. Don't assign them to CPU/APU nodes.
@@ -1222,7 +1221,6 @@ static struct kfd_topology_device *kfd_a
 			break;
 		}
 	}
-	up_write(&topology_lock);
 	return out_dev;
 }
 
@@ -1593,6 +1591,221 @@ out:
 	return ret;
 }
 
+
+/* Helper function. See kfd_fill_gpu_cache_info for parameter description */
+static int fill_in_l1_pcache(struct kfd_cache_properties **props_ext,
+				struct kfd_gpu_cache_info *pcache_info,
+				struct kfd_cu_info *cu_info,
+				int cu_bitmask,
+				int cache_type, unsigned int cu_processor_id,
+				int cu_block)
+{
+	unsigned int cu_sibling_map_mask;
+	int first_active_cu;
+	struct kfd_cache_properties *pcache = NULL;
+
+	cu_sibling_map_mask = cu_bitmask;
+	cu_sibling_map_mask >>= cu_block;
+	cu_sibling_map_mask &= ((1 << pcache_info[cache_type].num_cu_shared) - 1);
+	first_active_cu = ffs(cu_sibling_map_mask);
+
+	/* CU could be inactive. In case of shared cache find the first active
+	 * CU. and incase of non-shared cache check if the CU is inactive. If
+	 * inactive active skip it
+	 */
+	if (first_active_cu) {
+		pcache = kfd_alloc_struct(pcache);
+		if (!pcache)
+			return -ENOMEM;
+
+		memset(pcache, 0, sizeof(struct kfd_cache_properties));
+		pcache->processor_id_low = cu_processor_id + (first_active_cu - 1);
+		pcache->cache_level = pcache_info[cache_type].cache_level;
+		pcache->cache_size = pcache_info[cache_type].cache_size;
+
+		if (pcache_info[cache_type].flags & CRAT_CACHE_FLAGS_DATA_CACHE)
+			pcache->cache_type |= HSA_CACHE_TYPE_DATA;
+		if (pcache_info[cache_type].flags & CRAT_CACHE_FLAGS_INST_CACHE)
+			pcache->cache_type |= HSA_CACHE_TYPE_INSTRUCTION;
+		if (pcache_info[cache_type].flags & CRAT_CACHE_FLAGS_CPU_CACHE)
+			pcache->cache_type |= HSA_CACHE_TYPE_CPU;
+		if (pcache_info[cache_type].flags & CRAT_CACHE_FLAGS_SIMD_CACHE)
+			pcache->cache_type |= HSA_CACHE_TYPE_HSACU;
+
+		/* Sibling map is w.r.t processor_id_low, so shift out
+		 * inactive CU
+		 */
+		cu_sibling_map_mask =
+			cu_sibling_map_mask >> (first_active_cu - 1);
+
+		pcache->sibling_map[0] = (uint8_t)(cu_sibling_map_mask & 0xFF);
+		pcache->sibling_map[1] =
+				(uint8_t)((cu_sibling_map_mask >> 8) & 0xFF);
+		pcache->sibling_map[2] =
+				(uint8_t)((cu_sibling_map_mask >> 16) & 0xFF);
+		pcache->sibling_map[3] =
+				(uint8_t)((cu_sibling_map_mask >> 24) & 0xFF);
+
+		pcache->sibling_map_size = 4;
+		*props_ext = pcache;
+
+		return 0;
+	}
+	return 1;
+}
+
+/* Helper function. See kfd_fill_gpu_cache_info for parameter description */
+static int fill_in_l2_l3_pcache(struct kfd_cache_properties **props_ext,
+				struct kfd_gpu_cache_info *pcache_info,
+				struct kfd_cu_info *cu_info,
+				int cache_type, unsigned int cu_processor_id)
+{
+	unsigned int cu_sibling_map_mask;
+	int first_active_cu;
+	int i, j, k;
+	struct kfd_cache_properties *pcache = NULL;
+
+	cu_sibling_map_mask = cu_info->cu_bitmap[0][0];
+	cu_sibling_map_mask &=
+		((1 << pcache_info[cache_type].num_cu_shared) - 1);
+	first_active_cu = ffs(cu_sibling_map_mask);
+
+	/* CU could be inactive. In case of shared cache find the first active
+	 * CU. and incase of non-shared cache check if the CU is inactive. If
+	 * inactive active skip it
+	 */
+	if (first_active_cu) {
+		pcache = kfd_alloc_struct(pcache);
+		if (!pcache)
+			return -ENOMEM;
+
+		memset(pcache, 0, sizeof(struct kfd_cache_properties));
+		pcache->processor_id_low = cu_processor_id
+					+ (first_active_cu - 1);
+		pcache->cache_level = pcache_info[cache_type].cache_level;
+		pcache->cache_size = pcache_info[cache_type].cache_size;
+
+		if (pcache_info[cache_type].flags & CRAT_CACHE_FLAGS_DATA_CACHE)
+			pcache->cache_type |= HSA_CACHE_TYPE_DATA;
+		if (pcache_info[cache_type].flags & CRAT_CACHE_FLAGS_INST_CACHE)
+			pcache->cache_type |= HSA_CACHE_TYPE_INSTRUCTION;
+		if (pcache_info[cache_type].flags & CRAT_CACHE_FLAGS_CPU_CACHE)
+			pcache->cache_type |= HSA_CACHE_TYPE_CPU;
+		if (pcache_info[cache_type].flags & CRAT_CACHE_FLAGS_SIMD_CACHE)
+			pcache->cache_type |= HSA_CACHE_TYPE_HSACU;
+
+		/* Sibling map is w.r.t processor_id_low, so shift out
+		 * inactive CU
+		 */
+		cu_sibling_map_mask = cu_sibling_map_mask >> (first_active_cu - 1);
+		k = 0;
+
+		for (i = 0; i < cu_info->num_shader_engines; i++) {
+			for (j = 0; j < cu_info->num_shader_arrays_per_engine; j++) {
+				pcache->sibling_map[k] = (uint8_t)(cu_sibling_map_mask & 0xFF);
+				pcache->sibling_map[k+1] = (uint8_t)((cu_sibling_map_mask >> 8) & 0xFF);
+				pcache->sibling_map[k+2] = (uint8_t)((cu_sibling_map_mask >> 16) & 0xFF);
+				pcache->sibling_map[k+3] = (uint8_t)((cu_sibling_map_mask >> 24) & 0xFF);
+				k += 4;
+
+				cu_sibling_map_mask = cu_info->cu_bitmap[i % 4][j + i / 4];
+				cu_sibling_map_mask &= ((1 << pcache_info[cache_type].num_cu_shared) - 1);
+			}
+		}
+		pcache->sibling_map_size = k;
+		*props_ext = pcache;
+		return 0;
+	}
+	return 1;
+}
+
+#define KFD_MAX_CACHE_TYPES 6
+
+/* kfd_fill_cache_non_crat_info - Fill GPU cache info using kfd_gpu_cache_info
+ * tables
+ */
+void kfd_fill_cache_non_crat_info(struct kfd_topology_device *dev, struct kfd_dev *kdev)
+{
+	struct kfd_gpu_cache_info *pcache_info = NULL;
+	int i, j, k;
+	int ct = 0;
+	unsigned int cu_processor_id;
+	int ret;
+	unsigned int num_cu_shared;
+	struct kfd_cu_info cu_info;
+	struct kfd_cu_info *pcu_info;
+	int gpu_processor_id;
+	struct kfd_cache_properties *props_ext;
+	int num_of_entries = 0;
+	int num_of_cache_types = 0;
+	struct kfd_gpu_cache_info cache_info[KFD_MAX_CACHE_TYPES];
+
+	amdgpu_amdkfd_get_cu_info(kdev->adev, &cu_info);
+	pcu_info = &cu_info;
+
+	gpu_processor_id = dev->node_props.simd_id_base;
+
+	pcache_info = cache_info;
+	num_of_cache_types = kfd_get_gpu_cache_info(kdev, &pcache_info);
+	if (!num_of_cache_types) {
+		pr_warn("no cache info found\n");
+		return;
+	}
+
+	/* For each type of cache listed in the kfd_gpu_cache_info table,
+	 * go through all available Compute Units.
+	 * The [i,j,k] loop will
+	 *		if kfd_gpu_cache_info.num_cu_shared = 1
+	 *			will parse through all available CU
+	 *		If (kfd_gpu_cache_info.num_cu_shared != 1)
+	 *			then it will consider only one CU from
+	 *			the shared unit
+	 */
+	for (ct = 0; ct < num_of_cache_types; ct++) {
+		cu_processor_id = gpu_processor_id;
+		if (pcache_info[ct].cache_level == 1) {
+			for (i = 0; i < pcu_info->num_shader_engines; i++) {
+				for (j = 0; j < pcu_info->num_shader_arrays_per_engine; j++) {
+					for (k = 0; k < pcu_info->num_cu_per_sh; k += pcache_info[ct].num_cu_shared) {
+
+						ret = fill_in_l1_pcache(&props_ext, pcache_info, pcu_info,
+										pcu_info->cu_bitmap[i % 4][j + i / 4], ct,
+										cu_processor_id, k);
+
+						if (ret < 0)
+							break;
+
+						if (!ret) {
+							num_of_entries++;
+							list_add_tail(&props_ext->list, &dev->cache_props);
+						}
+
+						/* Move to next CU block */
+						num_cu_shared = ((k + pcache_info[ct].num_cu_shared) <=
+							pcu_info->num_cu_per_sh) ?
+							pcache_info[ct].num_cu_shared :
+							(pcu_info->num_cu_per_sh - k);
+						cu_processor_id += num_cu_shared;
+					}
+				}
+			}
+		} else {
+			ret = fill_in_l2_l3_pcache(&props_ext, pcache_info,
+								pcu_info, ct, cu_processor_id);
+
+			if (ret < 0)
+				break;
+
+			if (!ret) {
+				num_of_entries++;
+				list_add_tail(&props_ext->list, &dev->cache_props);
+			}
+		}
+	}
+	dev->node_props.caches_count += num_of_entries;
+	pr_debug("Added [%d] GPU cache entries\n", num_of_entries);
+}
+
 int kfd_topology_add_device(struct kfd_dev *gpu)
 {
 	uint32_t gpu_id;
@@ -1617,9 +1830,9 @@ int kfd_topology_add_device(struct kfd_d
 	 * CRAT to create a new topology device. Once created assign the gpu to
 	 * that topology device
 	 */
+	down_write(&topology_lock);
 	dev = kfd_assign_gpu(gpu);
 	if (!dev) {
-		down_write(&topology_lock);
 		proximity_domain = ++topology_crat_proximity_domain;
 
 		res = kfd_create_crat_image_virtual(&crat_image, &image_size,
@@ -1631,6 +1844,7 @@ int kfd_topology_add_device(struct kfd_d
 			topology_crat_proximity_domain--;
 			return res;
 		}
+
 		res = kfd_parse_crat_table(crat_image,
 					   &temp_topology_device_list,
 					   proximity_domain);
@@ -1644,23 +1858,28 @@ int kfd_topology_add_device(struct kfd_d
 		kfd_topology_update_device_list(&temp_topology_device_list,
 			&topology_device_list);
 
+		dev = kfd_assign_gpu(gpu);
+		if (WARN_ON(!dev)) {
+			res = -ENODEV;
+			goto err;
+		}
+
+		/* Fill the cache affinity information here for the GPUs
+		 * using VCRAT
+		 */
+		kfd_fill_cache_non_crat_info(dev, gpu);
+
 		/* Update the SYSFS tree, since we added another topology
 		 * device
 		 */
 		res = kfd_topology_update_sysfs();
-		up_write(&topology_lock);
-
 		if (!res)
 			sys_props.generation_count++;
 		else
 			pr_err("Failed to update GPU (ID: 0x%x) to sysfs topology. res=%d\n",
 						gpu_id, res);
-		dev = kfd_assign_gpu(gpu);
-		if (WARN_ON(!dev)) {
-			res = -ENODEV;
-			goto err;
-		}
 	}
+	up_write(&topology_lock);
 
 	dev->gpu_id = gpu_id;
 	gpu->id = gpu_id;
--- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
@@ -80,6 +80,8 @@ struct kfd_mem_properties {
 	struct attribute	attr;
 };
 
+#define CACHE_SIBLINGMAP_SIZE 64
+
 struct kfd_cache_properties {
 	struct list_head	list;
 	uint32_t		processor_id_low;
@@ -90,10 +92,11 @@ struct kfd_cache_properties {
 	uint32_t		cache_assoc;
 	uint32_t		cache_latency;
 	uint32_t		cache_type;
-	uint8_t			sibling_map[CRAT_SIBLINGMAP_SIZE];
+	uint8_t			sibling_map[CACHE_SIBLINGMAP_SIZE];
 	struct kfd_dev		*gpu;
 	struct kobject		*kobj;
 	struct attribute	attr;
+	uint32_t		sibling_map_size;
 };
 
 struct kfd_iolink_properties {

[PATCH 6.1 223/224] drm/amdkfd: add GC 11.0.4 KFD support

[Greg Kroah-Hartman]

From: Yifan Zhang <yifan1.zhang@amd.com>

commit 88c21c2b56aa21dd34290d43ada74033dc3bfe35 upstream.

Add initial support for GC 11.0.4 in KFD compute driver.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_crat.c   |    1 +
 drivers/gpu/drm/amd/amdkfd/kfd_device.c |    2 ++
 2 files changed, 3 insertions(+)

--- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
@@ -1522,6 +1522,7 @@ int kfd_get_gpu_cache_info(struct kfd_de
 		case IP_VERSION(11, 0, 1):
 		case IP_VERSION(11, 0, 2):
 		case IP_VERSION(11, 0, 3):
+		case IP_VERSION(11, 0, 4):
 			num_of_cache_types =
 				kfd_fill_gpu_cache_info_from_gfx_config(kdev, *pcache_info);
 			break;
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
@@ -154,6 +154,7 @@ static void kfd_device_info_set_event_in
 	case IP_VERSION(11, 0, 1):
 	case IP_VERSION(11, 0, 2):
 	case IP_VERSION(11, 0, 3):
+	case IP_VERSION(11, 0, 4):
 		kfd->device_info.event_interrupt_class = &event_interrupt_class_v11;
 		break;
 	default:
@@ -396,6 +397,7 @@ struct kfd_dev *kgd2kfd_probe(struct amd
 			f2g = &gfx_v11_kfd2kgd;
 			break;
 		case IP_VERSION(11, 0, 1):
+		case IP_VERSION(11, 0, 4):
 			gfx_target_version = 110003;
 			f2g = &gfx_v11_kfd2kgd;
 			break;

[PATCH 6.1 224/224] drm/amdkfd: Fix the memory overrun

[Greg Kroah-Hartman]

From: Ma Jun <Jun.Ma2@amd.com>

commit 4cc16d64b6cdb179a26fb389cae9dce788e88f5d upstream.

Fix the memory overrun issue caused by wrong array size.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527133 ("Memory - corruptions")
Fixes: c0cc999f3c32e6 ("drm/amdkfd: Fix the warning of array-index-out-of-bounds")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_crat.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_crat.c
@@ -1111,7 +1111,7 @@ static int kfd_parse_subtype_cache(struc
 			props->cache_latency = cache->cache_latency;
 
 			memcpy(props->sibling_map, cache->sibling_map,
-					sizeof(props->sibling_map));
+					CRAT_SIBLINGMAP_SIZE);
 
 			/* set the sibling_map_size as 32 for CRAT from ACPI */
 			props->sibling_map_size = CRAT_SIBLINGMAP_SIZE;

Re: [PATCH 6.1 000/224] 6.1.22-rc1 review

[Markus Reichelt]

* Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> This is the start of the stable review cycle for the 6.1.22 release.
> There are 224 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 30 Mar 2023 14:25:33 +0000.
> Anything received after that time might be too late.

Hi Greg

6.1.22-rc1

compiles, boots and runs here on x86_64
(AMD Ryzen 5 PRO 4650G, Slackware64-15.0)

Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>

Re: [PATCH 6.1 000/224] 6.1.22-rc1 review

[Shuah Khan]

On 3/28/23 08:39, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.22 release.
> There are 224 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 30 Mar 2023 14:25:33 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.22-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 6.1 000/224] 6.1.22-rc1 review

[ogasawara takeshi]

Hi Greg

On Tue, Mar 28, 2023 at 11:56 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.1.22 release.
> There are 224 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 30 Mar 2023 14:25:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.22-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

6.1.22-rc1 tested.

x86_64

Build successfully completed.
Boot successfully completed.
No dmesg regressions.
Video output normal.
Sound output normal.

Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P, arch linux)

Thanks

Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>

Re: [PATCH 6.1 000/224] 6.1.22-rc1 review

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 538 bytes --]

On Tue, Mar 28, 2023 at 04:39:56PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.22 release.
> There are 224 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully cross-compiled for arm64 (bcm2711_defconfig, GCC 10.2.0) and
powerpc (ps3_defconfig, GCC 12.2.0).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

RE: [PATCH 6.1 000/224] 6.1.22-rc1 review

[Chris Paterson]

Hello Greg,

> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Sent: 28 March 2023 15:40
> 
> This is the start of the stable review cycle for the 6.1.22 release.
> There are 224 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 30 Mar 2023 14:25:33 +0000.
> Anything received after that time might be too late.

CIP configurations built and booted with Linux 6.1.22-rc1 (e6bbee2ba76f):
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/820595007
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/commits/linux-6.1.y

Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>

Kind regards, Chris

Re: [PATCH 6.1 000/224] 6.1.22-rc1 review

[Rudi Heitbaum]

On Tue, Mar 28, 2023 at 04:39:56PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.22 release.
> There are 224 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 30 Mar 2023 14:25:33 +0000.
> Anything received after that time might be too late.

Hi Greg,

6.1.22-rc1 tested.

Run tested on:
- Allwinner H6 (Tanix TX6)
- Intel Alder Lake x86_64 (nuc12 i7-1260P)

In addition - build tested for:
- Allwinner A64
- Allwinner H3
- Allwinner H5
- NXP iMX6
- NXP iMX8
- Qualcomm Dragonboard
- Rockchip RK3288
- Rockchip RK3328
- Rockchip RK3399pro
- Samsung Exynos

Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
--
Rudi

Re: [PATCH 6.1 000/224] 6.1.22-rc1 review

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 396 bytes --]

On Tue, Mar 28, 2023 at 04:39:56PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.22 release.
> There are 224 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Looks grand on our RISC-V stuff, thanks.
Tested-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 6.1 000/224] 6.1.22-rc1 review

[Naresh Kamboju]

On Tue, 28 Mar 2023 at 20:26, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.1.22 release.
> There are 224 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 30 Mar 2023 14:25:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.22-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 6.1.22-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-6.1.y
* git commit: e6bbee2ba76fd6c97025903e3b04b1461f02e8af
* git describe: v6.1.21-225-ge6bbee2ba76f
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.1.y/build/v6.1.21-225-ge6bbee2ba76f

## Test Regressions (compared to v6.1.21)

## Metric Regressions (compared to v6.1.21)

## Test Fixes (compared to v6.1.21)

## Metric Fixes (compared to v6.1.21)

## Test result summary
total: 164164, pass: 145146, fail: 4467, skip: 14236, xfail: 315

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 149 total, 148 passed, 1 failed
* arm64: 51 total, 50 passed, 1 failed
* i386: 39 total, 36 passed, 3 failed
* mips: 30 total, 28 passed, 2 failed
* parisc: 8 total, 8 passed, 0 failed
* powerpc: 38 total, 36 passed, 2 failed
* riscv: 16 total, 15 passed, 1 failed
* s390: 16 total, 16 passed, 0 failed
* sh: 14 total, 12 passed, 2 failed
* sparc: 8 total, 8 passed, 0 failed
* x86_64: 44 total, 44 passed, 0 failed

## Test suites summary
* boot
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* perf
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 6.1 000/224] 6.1.22-rc1 review

[Florian Fainelli]

On 3/28/23 07:39, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.22 release.
> There are 224 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 30 Mar 2023 14:25:33 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.22-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 6.1 117/224] scsi: ufs: core: Initialize devfreq synchronously

[Adrien Thierry]

A possible regression was found with this patch [1]

[1] https://lore.kernel.org/all/CAGaU9a_PMZhqv+YJ0r3w-hJMsR922oxW6Kg59vw+oen-NZ6Otw@mail.gmail.com

Best,

Adrien

Re: [PATCH 6.1 000/224] 6.1.22-rc1 review

[Ron Economos]

On 3/28/23 7:39 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.22 release.
> There are 224 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 30 Mar 2023 14:25:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.1.22-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.1.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 6.1 000/224] 6.1.22-rc1 review

[Guenter Roeck]

On Tue, Mar 28, 2023 at 04:39:56PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.1.22 release.
> There are 224 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 30 Mar 2023 14:25:33 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 519 pass: 519 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter