stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/1] driver core: Fix driver_sysfs_remove() order in really_probe()
@ 2021-12-29  4:51 Lu Baolu
  2021-12-29 10:04 ` Greg Kroah-Hartman
  0 siblings, 1 reply; 3+ messages in thread
From: Lu Baolu @ 2021-12-29  4:51 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Rafael J . Wysocki, Kay Sievers, linux-kernel, Lu Baolu, stable

The driver_sysfs_remove() should always be called after successful
driver_sysfs_add(). Otherwise, NULL pointers will be passed to the
sysfs_remove_link(), where it is decoded as searching sysfs root.

Fixes: 1901fb2604fbc ("Driver core: fix "driver" symlink timing")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/base/dd.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 68ea1f949daa..9eaaff2f556c 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -577,14 +577,14 @@ static int really_probe(struct device *dev, struct device_driver *drv)
 	if (dev->bus->dma_configure) {
 		ret = dev->bus->dma_configure(dev);
 		if (ret)
-			goto probe_failed;
+			goto pinctrl_bind_failed;
 	}
 
 	ret = driver_sysfs_add(dev);
 	if (ret) {
 		pr_err("%s: driver_sysfs_add(%s) failed\n",
 		       __func__, dev_name(dev));
-		goto probe_failed;
+		goto sysfs_failed;
 	}
 
 	if (dev->pm_domain && dev->pm_domain->activate) {
@@ -657,6 +657,8 @@ static int really_probe(struct device *dev, struct device_driver *drv)
 	else if (drv->remove)
 		drv->remove(dev);
 probe_failed:
+	driver_sysfs_remove(dev);
+sysfs_failed:
 	if (dev->bus)
 		blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
 					     BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
@@ -666,7 +668,6 @@ static int really_probe(struct device *dev, struct device_driver *drv)
 	arch_teardown_dma_ops(dev);
 	kfree(dev->dma_range_map);
 	dev->dma_range_map = NULL;
-	driver_sysfs_remove(dev);
 	dev->driver = NULL;
 	dev_set_drvdata(dev, NULL);
 	if (dev->pm_domain && dev->pm_domain->dismiss)
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH 1/1] driver core: Fix driver_sysfs_remove() order in really_probe()
  2021-12-29  4:51 [PATCH 1/1] driver core: Fix driver_sysfs_remove() order in really_probe() Lu Baolu
@ 2021-12-29 10:04 ` Greg Kroah-Hartman
  2021-12-30  3:08   ` Lu Baolu
  0 siblings, 1 reply; 3+ messages in thread
From: Greg Kroah-Hartman @ 2021-12-29 10:04 UTC (permalink / raw)
  To: Lu Baolu; +Cc: Rafael J . Wysocki, Kay Sievers, linux-kernel, stable

On Wed, Dec 29, 2021 at 12:51:59PM +0800, Lu Baolu wrote:
> The driver_sysfs_remove() should always be called after successful
> driver_sysfs_add(). Otherwise, NULL pointers will be passed to the
> sysfs_remove_link(), where it is decoded as searching sysfs root.

What null pointer is being sent to sysfs_remove_link()?  For which link?

How are you triggering this failure path and how was it tested?

> 
> Fixes: 1901fb2604fbc ("Driver core: fix "driver" symlink timing")
> Cc: stable@vger.kernel.org
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> ---
>  drivers/base/dd.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/base/dd.c b/drivers/base/dd.c
> index 68ea1f949daa..9eaaff2f556c 100644
> --- a/drivers/base/dd.c
> +++ b/drivers/base/dd.c
> @@ -577,14 +577,14 @@ static int really_probe(struct device *dev, struct device_driver *drv)
>  	if (dev->bus->dma_configure) {
>  		ret = dev->bus->dma_configure(dev);
>  		if (ret)
> -			goto probe_failed;
> +			goto pinctrl_bind_failed;

Why not call the notifier chain here?  Did you verify that this change
still works properly?

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH 1/1] driver core: Fix driver_sysfs_remove() order in really_probe()
  2021-12-29 10:04 ` Greg Kroah-Hartman
@ 2021-12-30  3:08   ` Lu Baolu
  0 siblings, 0 replies; 3+ messages in thread
From: Lu Baolu @ 2021-12-30  3:08 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: baolu.lu, Rafael J . Wysocki, Kay Sievers, linux-kernel, stable

Hi Greg,

On 12/29/21 6:04 PM, Greg Kroah-Hartman wrote:
> On Wed, Dec 29, 2021 at 12:51:59PM +0800, Lu Baolu wrote:
>> The driver_sysfs_remove() should always be called after successful
>> driver_sysfs_add(). Otherwise, NULL pointers will be passed to the
>> sysfs_remove_link(), where it is decoded as searching sysfs root.
> 
> What null pointer is being sent to sysfs_remove_link()?  For which link?

Oh, my fault. Thank you for pointing this out.

The device and driver sysfs nodes have already been created, so there's
no null pointers. The out-of-order call of driver_sysfs_remove() just
tries to remove some nonexistent nodes under the device and driver sysfs
nodes. It is allowed by the sysfs layer.

> 
> How are you triggering this failure path and how was it tested?

I hacked the a driver to return failure in dma_configure() callback. I
didn't see any failure. But I mistakenly thought that
driver_sysfs_remove() could possibly delete some sysfs entries by
mistake. That's not true. Sorry for the noise.

> 
>>
>> Fixes: 1901fb2604fbc ("Driver core: fix "driver" symlink timing")
>> Cc: stable@vger.kernel.org

This patch only improves the readability of really_probe() and it does
not fix any bugs. I will remove above tags and resent a version if you
think this improvement is valuable.

>> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
>> ---
>>   drivers/base/dd.c | 7 ++++---
>>   1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/base/dd.c b/drivers/base/dd.c
>> index 68ea1f949daa..9eaaff2f556c 100644
>> --- a/drivers/base/dd.c
>> +++ b/drivers/base/dd.c
>> @@ -577,14 +577,14 @@ static int really_probe(struct device *dev, struct device_driver *drv)
>>   	if (dev->bus->dma_configure) {
>>   		ret = dev->bus->dma_configure(dev);
>>   		if (ret)
>> -			goto probe_failed;
>> +			goto pinctrl_bind_failed;
> 
> Why not call the notifier chain here?  Did you verify that this change
> still works properly?

The BUS_NOTIFY_DRIVER_NOT_BOUND event is listened in two places in the
tree.

$ git grep BUS_NOTIFY_DRIVER_NOT_BOUND -- :^drivers/base/dd.c :^include
drivers/acpi/acpi_lpss.c:       case BUS_NOTIFY_DRIVER_NOT_BOUND:
drivers/base/power/clock_ops.c: case BUS_NOTIFY_DRIVER_NOT_BOUND:

The usage pattern is setting up something in BUS_NOTIFY_BIND_DRIVER and
doing the cleanup in BUS_NOTIFY_DRIVER_NOT_BOUND or
BUS_NOTIFY_UNBIND_DRIVER. The right order of these events should be

  [failure case]
  - BUS_NOTIFY_BIND_DRIVER: driver is about to be bound
  - BUS_NOTIFY_DRIVER_NOT_BOUND: driver failed to be bound

or

  [successful case]
  - BUS_NOTIFY_BIND_DRIVER: driver is about to be bound
  - BUS_NOTIFY_BOUND_DRIVER: driver bound to device
  - BUS_NOTIFY_UNBIND_DRIVER: driver is about to be unbound
  - BUS_NOTIFY_UNBOUND_DRIVER: driver is unbound from the device

Without above change, when dma_configure() returns failure, the listener 
could get a BUS_NOTIFY_DRIVER_NOT_BOUND without BUS_NOTIFY_BIND_DRIVER.

Please guide me if my understanding is wrong.

> 
> thanks,
> 
> greg k-h
> 

Best regards,
baolu

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-12-30  3:09 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-29  4:51 [PATCH 1/1] driver core: Fix driver_sysfs_remove() order in really_probe() Lu Baolu
2021-12-29 10:04 ` Greg Kroah-Hartman
2021-12-30  3:08   ` Lu Baolu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).