* stable-rc 4.14.154-rc1/0d12dcf336c6: regressions detected in project stable v.4.14.y on OE - sanity [not found] <0100016e5ae0878e-7b9d1bef-b3be-4350-8823-440929ca4a81-000000@email.amazonses.com> @ 2019-11-11 18:15 ` Naresh Kamboju 2019-11-11 18:30 ` Greg Kroah-Hartman 0 siblings, 1 reply; 6+ messages in thread From: Naresh Kamboju @ 2019-11-11 18:15 UTC (permalink / raw) To: Greg Kroah-Hartman Cc: Sasha Levin, lkft-triage, Dan Rue, Daniel Diaz, Anders Roxell, linux- stable, open list, linux-mm Hi Greg, Regressions detected in project stable v.4.14. arm64, arm, x86_64 boot failed. Summary ------------------------------------------------------------------------ git branch: linux-4.14.y git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git git commit: a67492b55c53045e9c0b9969f04410723448c1ee git describe: v4.14.153-104-ga67492b55c53 make_kernelversion: 4.14.154-rc1 kernel-config: http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/juno/lkft/linux-stable-rc-4.14/641/config arm64 kernel crash log: --------------------------- [ 0.000000] Linux version 4.14.154-rc1 (oe-user@oe-host) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Mon Nov 11 17:15:34 UTC 2019 [ 0.000000] Boot CPU: AArch64 Processor [410fd033] [ 0.000000] Machine model: ARM Juno development board (r2) [ 0.000000] earlycon: pl11 at MMIO 0x000000007ff80000 (options '') [ 0.000000] bootconsole [pl11] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 16 MiB at 0x00000000fe000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000009ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x9fffc6f80-0x9fffc8bff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000009ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000feffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x00000009ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff] [ 0.000000] On node 0 totalpages: 2093056 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 520192 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 25 pages/cpu s62280 r8192 d31928 u102400 [ 0.000000] pcpu-alloc: s62280 r8192 d31928 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2060288 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/nfs rw nfsroot=10.66.16.123:/var/lib/lava/dispatcher/tmp/1004132/extract-nfsrootfs-jn9hl2x_,tcp,hard,intr,vers=3 rootwait earlycon=pl011,0x7ff80000 debug systemd.log_target=null user_debug=31 androidboot.hardware=juno loglevel=9 sky2.mac_address=0x00,0x02,0xF7,0x00,0x68,0x15 ip=dhcp [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB: mapped [mem 0xf9fff000-0xfdfff000] (64MB) [ 0.000000] Memory: 8123672K/8372224K available (12988K kernel code, 1878K rwdata, 5196K rodata, 1728K init, 12356K bss, 232168K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) [ 0.000000] .text : 0xffff000008080000 - 0xffff000008d30000 ( 12992 KB) [ 0.000000] .rodata : 0xffff000008d30000 - 0xffff000009250000 ( 5248 KB) [ 0.000000] .init : 0xffff000009250000 - 0xffff000009400000 ( 1728 KB) [ 0.000000] .data : 0xffff000009400000 - 0xffff0000095d5a00 ( 1879 KB) [ 0.000000] .bss : 0xffff0000095d5a00 - 0xffff00000a1e6dd0 ( 12357 KB) [ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 ( 4124 KB) [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) [ 0.000000] 0xffff7e0000000000 - 0xffff7e0026000000 ( 608 MB actual) [ 0.000000] memory : 0xffff800000000000 - 0xffff800980000000 ( 38912 MB) [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000510 [ 0.000000] Mem abort info: [ 0.000000] Exception class = DABT (current EL), IL = 32 bits [ 0.000000] SET = 0, FnV = 0 [ 0.000000] EA = 0, S1PTW = 0 [ 0.000000] Data abort info: [ 0.000000] ISV = 0, ISS = 0x00000004 [ 0.000000] CM = 0, WnR = 0 [ 0.000000] [0000000000000510] user address but active_mm is swapper [ 0.000000] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, stack limit = 0xffff000009400000) [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.154-rc1 #1 [ 0.000000] Hardware name: ARM Juno development board (r2) (DT) [ 0.000000] task: ffff000009419780 task.stack: ffff000009400000 [ 0.000000] PC is at __rmqueue+0x3c4/0x908 [ 0.000000] LR is at __rmqueue+0x384/0x908 [ 0.000000] pc : [<ffff0000082594ec>] lr : [<ffff0000082594ac>] pstate: 600000c5 [ 0.000000] sp : ffff000009403b10 [ 0.000000] x29: ffff000009403b10 x28: 0000000000000000 [ 0.000000] x27: 000000000000000a x26: ffff80097ffc7700 [ 0.000000] x25: 00007ff6800387c0 x24: 0000000000000000 [ 0.000000] x23: ffff00000940f000 x22: ffff80097ffc7800 [ 0.000000] x21: ffffffffffffff00 x20: ffff80097ffc7840 [ 0.000000] x19: ffff0000093ef000 x18: 0000000000000001 [ 0.000000] x17: 000000000000001c x16: 000000000000001b [ 0.000000] x15: 000000000000001a x14: ffff0000096833f8 [ 0.000000] x13: ffff0000095e3198 x12: 000000000c67c24e [ 0.000000] x11: ffff000009419fb0 x10: ffff00000a174000 [ 0.000000] x9 : ffff00000988b728 x8 : 0000000000000000 [ 0.000000] x7 : ffff0000092cf3a4 x6 : 0000000000000000 [ 0.000000] x5 : fffffffffffff1ff x4 : ffff7e0025de0020 [ 0.000000] x3 : ffff7e0025dd0020 x2 : 000000000000000a [ 0.000000] x1 : 000000000000001e x0 : 0000000000000410 [ 0.000000] Call trace: [ 0.000000] Exception stack(0xffff0000094039d0 to 0xffff000009403b10) [ 0.000000] 39c0: 0000000000000410 000000000000001e [ 0.000000] 39e0: 000000000000000a ffff7e0025dd0020 ffff7e0025de0020 fffffffffffff1ff [ 0.000000] 3a00: 0000000000000000 ffff0000092cf3a4 0000000000000000 ffff00000988b728 [ 0.000000] 3a20: ffff00000a174000 ffff000009419fb0 000000000c67c24e ffff0000095e3198 [ 0.000000] 3a40: ffff0000096833f8 000000000000001a 000000000000001b 000000000000001c [ 0.000000] 3a60: 0000000000000001 ffff0000093ef000 ffff80097ffc7840 ffffffffffffff00 [ 0.000000] 3a80: ffff80097ffc7800 ffff00000940f000 0000000000000000 00007ff6800387c0 [ 0.000000] 3aa0: ffff80097ffc7700 000000000000000a 0000000000000000 ffff000009403b10 [ 0.000000] 3ac0: ffff0000082594ac ffff000009403b10 ffff0000082594ec 00000000600000c5 [ 0.000000] 3ae0: ffffffffffffff00 ffff80097ffc7800 ffffffffffffffff ffff0000082594ac [ 0.000000] 3b00: ffff000009403b10 ffff0000082594ec [ 0.000000] [<ffff0000082594ec>] __rmqueue+0x3c4/0x908 [ 0.000000] [<ffff000008259e98>] get_page_from_freelist+0x468/0xcb8 [ 0.000000] [<ffff00000825aa3c>] __alloc_pages_nodemask+0x12c/0x1248 [ 0.000000] [<ffff0000082cdba8>] new_slab+0xc0/0x568 [ 0.000000] [<ffff0000082d5328>] __kmem_cache_create+0x2e0/0x628 [ 0.000000] [<ffff000009271dec>] create_boot_cache+0xa8/0xdc [ 0.000000] [<ffff000009275b40>] kmem_cache_init+0x58/0x120 [ 0.000000] [<ffff000009250b3c>] start_kernel+0x200/0x3d8 [ 0.000000] Code: 8b000401 8b010800 d37df000 8b081000 (f9408000) [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x54/0x70 with crng_init=0 [ 0.000000] ---[ end trace c75a488acdeef932 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! Full test log link, https://lkft.validation.linaro.org/scheduler/job/1004132#L482 - Naresh ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: stable-rc 4.14.154-rc1/0d12dcf336c6: regressions detected in project stable v.4.14.y on OE - sanity 2019-11-11 18:15 ` stable-rc 4.14.154-rc1/0d12dcf336c6: regressions detected in project stable v.4.14.y on OE - sanity Naresh Kamboju @ 2019-11-11 18:30 ` Greg Kroah-Hartman 2019-11-12 3:19 ` Daniel Díaz 0 siblings, 1 reply; 6+ messages in thread From: Greg Kroah-Hartman @ 2019-11-11 18:30 UTC (permalink / raw) To: Naresh Kamboju Cc: Sasha Levin, lkft-triage, Dan Rue, Daniel Diaz, Anders Roxell, linux- stable, open list, linux-mm On Mon, Nov 11, 2019 at 11:45:35PM +0530, Naresh Kamboju wrote: > Hi Greg, > > Regressions detected in project stable v.4.14. > arm64, arm, x86_64 boot failed. > > Summary > ------------------------------------------------------------------------ > git branch: linux-4.14.y > git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git > git commit: a67492b55c53045e9c0b9969f04410723448c1ee > git describe: v4.14.153-104-ga67492b55c53 > make_kernelversion: 4.14.154-rc1 > kernel-config: > http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/juno/lkft/linux-stable-rc-4.14/641/config > > > arm64 kernel crash log: > --------------------------- > [ 0.000000] Linux version 4.14.154-rc1 (oe-user@oe-host) (gcc > version 7.3.0 (GCC)) #1 SMP PREEMPT Mon Nov 11 17:15:34 UTC 2019 > [ 0.000000] Boot CPU: AArch64 Processor [410fd033] > [ 0.000000] Machine model: ARM Juno development board (r2) > [ 0.000000] earlycon: pl11 at MMIO 0x000000007ff80000 (options '') > [ 0.000000] bootconsole [pl11] enabled > [ 0.000000] efi: Getting EFI parameters from FDT: > [ 0.000000] efi: UEFI not found. > [ 0.000000] cma: Reserved 16 MiB at 0x00000000fe000000 > [ 0.000000] NUMA: No NUMA configuration found > [ 0.000000] NUMA: Faking a node at [mem > 0x0000000000000000-0x00000009ffffffff] > [ 0.000000] NUMA: NODE_DATA [mem 0x9fffc6f80-0x9fffc8bff] > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] > [ 0.000000] Normal [mem 0x0000000100000000-0x00000009ffffffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000feffffff] > [ 0.000000] node 0: [mem 0x0000000880000000-0x00000009ffffffff] > [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff] > [ 0.000000] On node 0 totalpages: 2093056 > [ 0.000000] DMA zone: 8192 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 520192 pages, LIFO batch:31 > [ 0.000000] Normal zone: 24576 pages used for memmap > [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 > [ 0.000000] psci: probing for conduit method from DT. > [ 0.000000] psci: PSCIv1.1 detected in firmware. > [ 0.000000] psci: Using standard PSCI v0.2 function IDs > [ 0.000000] psci: Trusted OS migration not required > [ 0.000000] psci: SMC Calling Convention v1.0 > [ 0.000000] percpu: Embedded 25 pages/cpu s62280 r8192 d31928 u102400 > [ 0.000000] pcpu-alloc: s62280 r8192 d31928 u102400 alloc=25*4096 > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 > [ 0.000000] Detected VIPT I-cache on CPU0 > [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2060288 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 > root=/dev/nfs rw > nfsroot=10.66.16.123:/var/lib/lava/dispatcher/tmp/1004132/extract-nfsrootfs-jn9hl2x_,tcp,hard,intr,vers=3 > rootwait earlycon=pl011,0x7ff80000 debug systemd.log_target=null > user_debug=31 androidboot.hardware=juno loglevel=9 > sky2.mac_address=0x00,0x02,0xF7,0x00,0x68,0x15 ip=dhcp > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] software IO TLB: mapped [mem 0xf9fff000-0xfdfff000] (64MB) > [ 0.000000] Memory: 8123672K/8372224K available (12988K kernel > code, 1878K rwdata, 5196K rodata, 1728K init, 12356K bss, 232168K > reserved, 16384K cma-reserved) > [ 0.000000] Virtual kernel memory layout: > [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 > ( 128 MB) > [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 > (129022 GB) > [ 0.000000] .text : 0xffff000008080000 - 0xffff000008d30000 > ( 12992 KB) > [ 0.000000] .rodata : 0xffff000008d30000 - 0xffff000009250000 > ( 5248 KB) > [ 0.000000] .init : 0xffff000009250000 - 0xffff000009400000 > ( 1728 KB) > [ 0.000000] .data : 0xffff000009400000 - 0xffff0000095d5a00 > ( 1879 KB) > [ 0.000000] .bss : 0xffff0000095d5a00 - 0xffff00000a1e6dd0 > ( 12357 KB) > [ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 > ( 4124 KB) > [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 > ( 16 MB) > [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 > ( 2048 GB maximum) > [ 0.000000] 0xffff7e0000000000 - 0xffff7e0026000000 > ( 608 MB actual) > [ 0.000000] memory : 0xffff800000000000 - 0xffff800980000000 > ( 38912 MB) > [ 0.000000] Unable to handle kernel NULL pointer dereference at > virtual address 00000510 > [ 0.000000] Mem abort info: > [ 0.000000] Exception class = DABT (current EL), IL = 32 bits > [ 0.000000] SET = 0, FnV = 0 > [ 0.000000] EA = 0, S1PTW = 0 > [ 0.000000] Data abort info: > [ 0.000000] ISV = 0, ISS = 0x00000004 > [ 0.000000] CM = 0, WnR = 0 > [ 0.000000] [0000000000000510] user address but active_mm is swapper > [ 0.000000] Internal error: Oops: 96000004 [#1] PREEMPT SMP > [ 0.000000] Modules linked in: > [ 0.000000] Process swapper (pid: 0, stack limit = 0xffff000009400000) > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.154-rc1 #1 > [ 0.000000] Hardware name: ARM Juno development board (r2) (DT) > [ 0.000000] task: ffff000009419780 task.stack: ffff000009400000 > [ 0.000000] PC is at __rmqueue+0x3c4/0x908 > [ 0.000000] LR is at __rmqueue+0x384/0x908 > [ 0.000000] pc : [<ffff0000082594ec>] lr : [<ffff0000082594ac>] > pstate: 600000c5 > [ 0.000000] sp : ffff000009403b10 > [ 0.000000] x29: ffff000009403b10 x28: 0000000000000000 > [ 0.000000] x27: 000000000000000a x26: ffff80097ffc7700 > [ 0.000000] x25: 00007ff6800387c0 x24: 0000000000000000 > [ 0.000000] x23: ffff00000940f000 x22: ffff80097ffc7800 > [ 0.000000] x21: ffffffffffffff00 x20: ffff80097ffc7840 > [ 0.000000] x19: ffff0000093ef000 x18: 0000000000000001 > [ 0.000000] x17: 000000000000001c x16: 000000000000001b > [ 0.000000] x15: 000000000000001a x14: ffff0000096833f8 > [ 0.000000] x13: ffff0000095e3198 x12: 000000000c67c24e > [ 0.000000] x11: ffff000009419fb0 x10: ffff00000a174000 > [ 0.000000] x9 : ffff00000988b728 x8 : 0000000000000000 > [ 0.000000] x7 : ffff0000092cf3a4 x6 : 0000000000000000 > [ 0.000000] x5 : fffffffffffff1ff x4 : ffff7e0025de0020 > [ 0.000000] x3 : ffff7e0025dd0020 x2 : 000000000000000a > [ 0.000000] x1 : 000000000000001e x0 : 0000000000000410 > [ 0.000000] Call trace: > [ 0.000000] Exception stack(0xffff0000094039d0 to 0xffff000009403b10) > [ 0.000000] 39c0: > 0000000000000410 000000000000001e > [ 0.000000] 39e0: 000000000000000a ffff7e0025dd0020 > ffff7e0025de0020 fffffffffffff1ff > [ 0.000000] 3a00: 0000000000000000 ffff0000092cf3a4 > 0000000000000000 ffff00000988b728 > [ 0.000000] 3a20: ffff00000a174000 ffff000009419fb0 > 000000000c67c24e ffff0000095e3198 > [ 0.000000] 3a40: ffff0000096833f8 000000000000001a > 000000000000001b 000000000000001c > [ 0.000000] 3a60: 0000000000000001 ffff0000093ef000 > ffff80097ffc7840 ffffffffffffff00 > [ 0.000000] 3a80: ffff80097ffc7800 ffff00000940f000 > 0000000000000000 00007ff6800387c0 > [ 0.000000] 3aa0: ffff80097ffc7700 000000000000000a > 0000000000000000 ffff000009403b10 > [ 0.000000] 3ac0: ffff0000082594ac ffff000009403b10 > ffff0000082594ec 00000000600000c5 > [ 0.000000] 3ae0: ffffffffffffff00 ffff80097ffc7800 > ffffffffffffffff ffff0000082594ac > [ 0.000000] 3b00: ffff000009403b10 ffff0000082594ec > [ 0.000000] [<ffff0000082594ec>] __rmqueue+0x3c4/0x908 > [ 0.000000] [<ffff000008259e98>] get_page_from_freelist+0x468/0xcb8 > [ 0.000000] [<ffff00000825aa3c>] __alloc_pages_nodemask+0x12c/0x1248 > [ 0.000000] [<ffff0000082cdba8>] new_slab+0xc0/0x568 > [ 0.000000] [<ffff0000082d5328>] __kmem_cache_create+0x2e0/0x628 > [ 0.000000] [<ffff000009271dec>] create_boot_cache+0xa8/0xdc > [ 0.000000] [<ffff000009275b40>] kmem_cache_init+0x58/0x120 > [ 0.000000] [<ffff000009250b3c>] start_kernel+0x200/0x3d8 > [ 0.000000] Code: 8b000401 8b010800 d37df000 8b081000 (f9408000) > [ 0.000000] random: get_random_bytes called from > print_oops_end_marker+0x54/0x70 with crng_init=0 > [ 0.000000] ---[ end trace c75a488acdeef932 ]--- > [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! > [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill > the idle task! > > > Full test log link, > https://lkft.validation.linaro.org/scheduler/job/1004132#L482 Any chance you can bisect? thanks, greg k-h ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: stable-rc 4.14.154-rc1/0d12dcf336c6: regressions detected in project stable v.4.14.y on OE - sanity 2019-11-11 18:30 ` Greg Kroah-Hartman @ 2019-11-12 3:19 ` Daniel Díaz 2019-11-12 5:17 ` Greg Kroah-Hartman 0 siblings, 1 reply; 6+ messages in thread From: Daniel Díaz @ 2019-11-12 3:19 UTC (permalink / raw) To: Greg Kroah-Hartman Cc: Naresh Kamboju, Sasha Levin, lkft-triage, Dan Rue, Anders Roxell, linux- stable, open list, linux-mm Hello! On Mon, 11 Nov 2019 at 12:58, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote: > On Mon, Nov 11, 2019 at 11:45:35PM +0530, Naresh Kamboju wrote: > > Hi Greg, > > > > Regressions detected in project stable v.4.14. > > arm64, arm, x86_64 boot failed. > > > > Summary > > ------------------------------------------------------------------------ > > git branch: linux-4.14.y > > git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git > > git commit: a67492b55c53045e9c0b9969f04410723448c1ee > > git describe: v4.14.153-104-ga67492b55c53 > > make_kernelversion: 4.14.154-rc1 > > kernel-config: > > http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/juno/lkft/linux-stable-rc-4.14/641/config > > > > > > arm64 kernel crash log: > > --------------------------- > > [ 0.000000] Linux version 4.14.154-rc1 (oe-user@oe-host) (gcc > > version 7.3.0 (GCC)) #1 SMP PREEMPT Mon Nov 11 17:15:34 UTC 2019 > > [ 0.000000] Boot CPU: AArch64 Processor [410fd033] > > [ 0.000000] Machine model: ARM Juno development board (r2) > > [ 0.000000] earlycon: pl11 at MMIO 0x000000007ff80000 (options '') > > [ 0.000000] bootconsole [pl11] enabled > > [ 0.000000] efi: Getting EFI parameters from FDT: > > [ 0.000000] efi: UEFI not found. > > [ 0.000000] cma: Reserved 16 MiB at 0x00000000fe000000 > > [ 0.000000] NUMA: No NUMA configuration found > > [ 0.000000] NUMA: Faking a node at [mem > > 0x0000000000000000-0x00000009ffffffff] > > [ 0.000000] NUMA: NODE_DATA [mem 0x9fffc6f80-0x9fffc8bff] > > [ 0.000000] Zone ranges: > > [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] > > [ 0.000000] Normal [mem 0x0000000100000000-0x00000009ffffffff] > > [ 0.000000] Movable zone start for each node > > [ 0.000000] Early memory node ranges > > [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000feffffff] > > [ 0.000000] node 0: [mem 0x0000000880000000-0x00000009ffffffff] > > [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff] > > [ 0.000000] On node 0 totalpages: 2093056 > > [ 0.000000] DMA zone: 8192 pages used for memmap > > [ 0.000000] DMA zone: 0 pages reserved > > [ 0.000000] DMA zone: 520192 pages, LIFO batch:31 > > [ 0.000000] Normal zone: 24576 pages used for memmap > > [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 > > [ 0.000000] psci: probing for conduit method from DT. > > [ 0.000000] psci: PSCIv1.1 detected in firmware. > > [ 0.000000] psci: Using standard PSCI v0.2 function IDs > > [ 0.000000] psci: Trusted OS migration not required > > [ 0.000000] psci: SMC Calling Convention v1.0 > > [ 0.000000] percpu: Embedded 25 pages/cpu s62280 r8192 d31928 u102400 > > [ 0.000000] pcpu-alloc: s62280 r8192 d31928 u102400 alloc=25*4096 > > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 > > [ 0.000000] Detected VIPT I-cache on CPU0 > > [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2060288 > > [ 0.000000] Policy zone: Normal > > [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 > > root=/dev/nfs rw > > nfsroot=10.66.16.123:/var/lib/lava/dispatcher/tmp/1004132/extract-nfsrootfs-jn9hl2x_,tcp,hard,intr,vers=3 > > rootwait earlycon=pl011,0x7ff80000 debug systemd.log_target=null > > user_debug=31 androidboot.hardware=juno loglevel=9 > > sky2.mac_address=0x00,0x02,0xF7,0x00,0x68,0x15 ip=dhcp > > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > > [ 0.000000] software IO TLB: mapped [mem 0xf9fff000-0xfdfff000] (64MB) > > [ 0.000000] Memory: 8123672K/8372224K available (12988K kernel > > code, 1878K rwdata, 5196K rodata, 1728K init, 12356K bss, 232168K > > reserved, 16384K cma-reserved) > > [ 0.000000] Virtual kernel memory layout: > > [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 > > ( 128 MB) > > [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 > > (129022 GB) > > [ 0.000000] .text : 0xffff000008080000 - 0xffff000008d30000 > > ( 12992 KB) > > [ 0.000000] .rodata : 0xffff000008d30000 - 0xffff000009250000 > > ( 5248 KB) > > [ 0.000000] .init : 0xffff000009250000 - 0xffff000009400000 > > ( 1728 KB) > > [ 0.000000] .data : 0xffff000009400000 - 0xffff0000095d5a00 > > ( 1879 KB) > > [ 0.000000] .bss : 0xffff0000095d5a00 - 0xffff00000a1e6dd0 > > ( 12357 KB) > > [ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 > > ( 4124 KB) > > [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 > > ( 16 MB) > > [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 > > ( 2048 GB maximum) > > [ 0.000000] 0xffff7e0000000000 - 0xffff7e0026000000 > > ( 608 MB actual) > > [ 0.000000] memory : 0xffff800000000000 - 0xffff800980000000 > > ( 38912 MB) > > [ 0.000000] Unable to handle kernel NULL pointer dereference at > > virtual address 00000510 > > [ 0.000000] Mem abort info: > > [ 0.000000] Exception class = DABT (current EL), IL = 32 bits > > [ 0.000000] SET = 0, FnV = 0 > > [ 0.000000] EA = 0, S1PTW = 0 > > [ 0.000000] Data abort info: > > [ 0.000000] ISV = 0, ISS = 0x00000004 > > [ 0.000000] CM = 0, WnR = 0 > > [ 0.000000] [0000000000000510] user address but active_mm is swapper > > [ 0.000000] Internal error: Oops: 96000004 [#1] PREEMPT SMP > > [ 0.000000] Modules linked in: > > [ 0.000000] Process swapper (pid: 0, stack limit = 0xffff000009400000) > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.154-rc1 #1 > > [ 0.000000] Hardware name: ARM Juno development board (r2) (DT) > > [ 0.000000] task: ffff000009419780 task.stack: ffff000009400000 > > [ 0.000000] PC is at __rmqueue+0x3c4/0x908 > > [ 0.000000] LR is at __rmqueue+0x384/0x908 > > [ 0.000000] pc : [<ffff0000082594ec>] lr : [<ffff0000082594ac>] > > pstate: 600000c5 > > [ 0.000000] sp : ffff000009403b10 > > [ 0.000000] x29: ffff000009403b10 x28: 0000000000000000 > > [ 0.000000] x27: 000000000000000a x26: ffff80097ffc7700 > > [ 0.000000] x25: 00007ff6800387c0 x24: 0000000000000000 > > [ 0.000000] x23: ffff00000940f000 x22: ffff80097ffc7800 > > [ 0.000000] x21: ffffffffffffff00 x20: ffff80097ffc7840 > > [ 0.000000] x19: ffff0000093ef000 x18: 0000000000000001 > > [ 0.000000] x17: 000000000000001c x16: 000000000000001b > > [ 0.000000] x15: 000000000000001a x14: ffff0000096833f8 > > [ 0.000000] x13: ffff0000095e3198 x12: 000000000c67c24e > > [ 0.000000] x11: ffff000009419fb0 x10: ffff00000a174000 > > [ 0.000000] x9 : ffff00000988b728 x8 : 0000000000000000 > > [ 0.000000] x7 : ffff0000092cf3a4 x6 : 0000000000000000 > > [ 0.000000] x5 : fffffffffffff1ff x4 : ffff7e0025de0020 > > [ 0.000000] x3 : ffff7e0025dd0020 x2 : 000000000000000a > > [ 0.000000] x1 : 000000000000001e x0 : 0000000000000410 > > [ 0.000000] Call trace: > > [ 0.000000] Exception stack(0xffff0000094039d0 to 0xffff000009403b10) > > [ 0.000000] 39c0: > > 0000000000000410 000000000000001e > > [ 0.000000] 39e0: 000000000000000a ffff7e0025dd0020 > > ffff7e0025de0020 fffffffffffff1ff > > [ 0.000000] 3a00: 0000000000000000 ffff0000092cf3a4 > > 0000000000000000 ffff00000988b728 > > [ 0.000000] 3a20: ffff00000a174000 ffff000009419fb0 > > 000000000c67c24e ffff0000095e3198 > > [ 0.000000] 3a40: ffff0000096833f8 000000000000001a > > 000000000000001b 000000000000001c > > [ 0.000000] 3a60: 0000000000000001 ffff0000093ef000 > > ffff80097ffc7840 ffffffffffffff00 > > [ 0.000000] 3a80: ffff80097ffc7800 ffff00000940f000 > > 0000000000000000 00007ff6800387c0 > > [ 0.000000] 3aa0: ffff80097ffc7700 000000000000000a > > 0000000000000000 ffff000009403b10 > > [ 0.000000] 3ac0: ffff0000082594ac ffff000009403b10 > > ffff0000082594ec 00000000600000c5 > > [ 0.000000] 3ae0: ffffffffffffff00 ffff80097ffc7800 > > ffffffffffffffff ffff0000082594ac > > [ 0.000000] 3b00: ffff000009403b10 ffff0000082594ec > > [ 0.000000] [<ffff0000082594ec>] __rmqueue+0x3c4/0x908 > > [ 0.000000] [<ffff000008259e98>] get_page_from_freelist+0x468/0xcb8 > > [ 0.000000] [<ffff00000825aa3c>] __alloc_pages_nodemask+0x12c/0x1248 > > [ 0.000000] [<ffff0000082cdba8>] new_slab+0xc0/0x568 > > [ 0.000000] [<ffff0000082d5328>] __kmem_cache_create+0x2e0/0x628 > > [ 0.000000] [<ffff000009271dec>] create_boot_cache+0xa8/0xdc > > [ 0.000000] [<ffff000009275b40>] kmem_cache_init+0x58/0x120 > > [ 0.000000] [<ffff000009250b3c>] start_kernel+0x200/0x3d8 > > [ 0.000000] Code: 8b000401 8b010800 d37df000 8b081000 (f9408000) > > [ 0.000000] random: get_random_bytes called from > > print_oops_end_marker+0x54/0x70 with crng_init=0 > > [ 0.000000] ---[ end trace c75a488acdeef932 ]--- > > [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! > > [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill > > the idle task! > > > > > > Full test log link, > > https://lkft.validation.linaro.org/scheduler/job/1004132#L482 > > Any chance you can bisect? Reverting 61dbb1f20417 ("mm, meminit: recalculate pcpu batch and high limits after init completes") got the system working again. Greetings! Daniel Díaz daniel.diaz@linaro.org ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: stable-rc 4.14.154-rc1/0d12dcf336c6: regressions detected in project stable v.4.14.y on OE - sanity 2019-11-12 3:19 ` Daniel Díaz @ 2019-11-12 5:17 ` Greg Kroah-Hartman 2019-11-12 7:20 ` Naresh Kamboju 0 siblings, 1 reply; 6+ messages in thread From: Greg Kroah-Hartman @ 2019-11-12 5:17 UTC (permalink / raw) To: Daniel Díaz Cc: Naresh Kamboju, Sasha Levin, lkft-triage, Dan Rue, Anders Roxell, linux- stable, open list, linux-mm On Mon, Nov 11, 2019 at 09:19:40PM -0600, Daniel Díaz wrote: > Hello! > > On Mon, 11 Nov 2019 at 12:58, Greg Kroah-Hartman > <gregkh@linuxfoundation.org> wrote: > > On Mon, Nov 11, 2019 at 11:45:35PM +0530, Naresh Kamboju wrote: > > > Hi Greg, > > > > > > Regressions detected in project stable v.4.14. > > > arm64, arm, x86_64 boot failed. > > > > > > Summary > > > ------------------------------------------------------------------------ > > > git branch: linux-4.14.y > > > git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git > > > git commit: a67492b55c53045e9c0b9969f04410723448c1ee > > > git describe: v4.14.153-104-ga67492b55c53 > > > make_kernelversion: 4.14.154-rc1 > > > kernel-config: > > > http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/juno/lkft/linux-stable-rc-4.14/641/config > > > > > > > > > arm64 kernel crash log: > > > --------------------------- > > > [ 0.000000] Linux version 4.14.154-rc1 (oe-user@oe-host) (gcc > > > version 7.3.0 (GCC)) #1 SMP PREEMPT Mon Nov 11 17:15:34 UTC 2019 > > > [ 0.000000] Boot CPU: AArch64 Processor [410fd033] > > > [ 0.000000] Machine model: ARM Juno development board (r2) > > > [ 0.000000] earlycon: pl11 at MMIO 0x000000007ff80000 (options '') > > > [ 0.000000] bootconsole [pl11] enabled > > > [ 0.000000] efi: Getting EFI parameters from FDT: > > > [ 0.000000] efi: UEFI not found. > > > [ 0.000000] cma: Reserved 16 MiB at 0x00000000fe000000 > > > [ 0.000000] NUMA: No NUMA configuration found > > > [ 0.000000] NUMA: Faking a node at [mem > > > 0x0000000000000000-0x00000009ffffffff] > > > [ 0.000000] NUMA: NODE_DATA [mem 0x9fffc6f80-0x9fffc8bff] > > > [ 0.000000] Zone ranges: > > > [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] > > > [ 0.000000] Normal [mem 0x0000000100000000-0x00000009ffffffff] > > > [ 0.000000] Movable zone start for each node > > > [ 0.000000] Early memory node ranges > > > [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000feffffff] > > > [ 0.000000] node 0: [mem 0x0000000880000000-0x00000009ffffffff] > > > [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff] > > > [ 0.000000] On node 0 totalpages: 2093056 > > > [ 0.000000] DMA zone: 8192 pages used for memmap > > > [ 0.000000] DMA zone: 0 pages reserved > > > [ 0.000000] DMA zone: 520192 pages, LIFO batch:31 > > > [ 0.000000] Normal zone: 24576 pages used for memmap > > > [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 > > > [ 0.000000] psci: probing for conduit method from DT. > > > [ 0.000000] psci: PSCIv1.1 detected in firmware. > > > [ 0.000000] psci: Using standard PSCI v0.2 function IDs > > > [ 0.000000] psci: Trusted OS migration not required > > > [ 0.000000] psci: SMC Calling Convention v1.0 > > > [ 0.000000] percpu: Embedded 25 pages/cpu s62280 r8192 d31928 u102400 > > > [ 0.000000] pcpu-alloc: s62280 r8192 d31928 u102400 alloc=25*4096 > > > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 > > > [ 0.000000] Detected VIPT I-cache on CPU0 > > > [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 > > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2060288 > > > [ 0.000000] Policy zone: Normal > > > [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 > > > root=/dev/nfs rw > > > nfsroot=10.66.16.123:/var/lib/lava/dispatcher/tmp/1004132/extract-nfsrootfs-jn9hl2x_,tcp,hard,intr,vers=3 > > > rootwait earlycon=pl011,0x7ff80000 debug systemd.log_target=null > > > user_debug=31 androidboot.hardware=juno loglevel=9 > > > sky2.mac_address=0x00,0x02,0xF7,0x00,0x68,0x15 ip=dhcp > > > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > > > [ 0.000000] software IO TLB: mapped [mem 0xf9fff000-0xfdfff000] (64MB) > > > [ 0.000000] Memory: 8123672K/8372224K available (12988K kernel > > > code, 1878K rwdata, 5196K rodata, 1728K init, 12356K bss, 232168K > > > reserved, 16384K cma-reserved) > > > [ 0.000000] Virtual kernel memory layout: > > > [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 > > > ( 128 MB) > > > [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 > > > (129022 GB) > > > [ 0.000000] .text : 0xffff000008080000 - 0xffff000008d30000 > > > ( 12992 KB) > > > [ 0.000000] .rodata : 0xffff000008d30000 - 0xffff000009250000 > > > ( 5248 KB) > > > [ 0.000000] .init : 0xffff000009250000 - 0xffff000009400000 > > > ( 1728 KB) > > > [ 0.000000] .data : 0xffff000009400000 - 0xffff0000095d5a00 > > > ( 1879 KB) > > > [ 0.000000] .bss : 0xffff0000095d5a00 - 0xffff00000a1e6dd0 > > > ( 12357 KB) > > > [ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 > > > ( 4124 KB) > > > [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 > > > ( 16 MB) > > > [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 > > > ( 2048 GB maximum) > > > [ 0.000000] 0xffff7e0000000000 - 0xffff7e0026000000 > > > ( 608 MB actual) > > > [ 0.000000] memory : 0xffff800000000000 - 0xffff800980000000 > > > ( 38912 MB) > > > [ 0.000000] Unable to handle kernel NULL pointer dereference at > > > virtual address 00000510 > > > [ 0.000000] Mem abort info: > > > [ 0.000000] Exception class = DABT (current EL), IL = 32 bits > > > [ 0.000000] SET = 0, FnV = 0 > > > [ 0.000000] EA = 0, S1PTW = 0 > > > [ 0.000000] Data abort info: > > > [ 0.000000] ISV = 0, ISS = 0x00000004 > > > [ 0.000000] CM = 0, WnR = 0 > > > [ 0.000000] [0000000000000510] user address but active_mm is swapper > > > [ 0.000000] Internal error: Oops: 96000004 [#1] PREEMPT SMP > > > [ 0.000000] Modules linked in: > > > [ 0.000000] Process swapper (pid: 0, stack limit = 0xffff000009400000) > > > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.154-rc1 #1 > > > [ 0.000000] Hardware name: ARM Juno development board (r2) (DT) > > > [ 0.000000] task: ffff000009419780 task.stack: ffff000009400000 > > > [ 0.000000] PC is at __rmqueue+0x3c4/0x908 > > > [ 0.000000] LR is at __rmqueue+0x384/0x908 > > > [ 0.000000] pc : [<ffff0000082594ec>] lr : [<ffff0000082594ac>] > > > pstate: 600000c5 > > > [ 0.000000] sp : ffff000009403b10 > > > [ 0.000000] x29: ffff000009403b10 x28: 0000000000000000 > > > [ 0.000000] x27: 000000000000000a x26: ffff80097ffc7700 > > > [ 0.000000] x25: 00007ff6800387c0 x24: 0000000000000000 > > > [ 0.000000] x23: ffff00000940f000 x22: ffff80097ffc7800 > > > [ 0.000000] x21: ffffffffffffff00 x20: ffff80097ffc7840 > > > [ 0.000000] x19: ffff0000093ef000 x18: 0000000000000001 > > > [ 0.000000] x17: 000000000000001c x16: 000000000000001b > > > [ 0.000000] x15: 000000000000001a x14: ffff0000096833f8 > > > [ 0.000000] x13: ffff0000095e3198 x12: 000000000c67c24e > > > [ 0.000000] x11: ffff000009419fb0 x10: ffff00000a174000 > > > [ 0.000000] x9 : ffff00000988b728 x8 : 0000000000000000 > > > [ 0.000000] x7 : ffff0000092cf3a4 x6 : 0000000000000000 > > > [ 0.000000] x5 : fffffffffffff1ff x4 : ffff7e0025de0020 > > > [ 0.000000] x3 : ffff7e0025dd0020 x2 : 000000000000000a > > > [ 0.000000] x1 : 000000000000001e x0 : 0000000000000410 > > > [ 0.000000] Call trace: > > > [ 0.000000] Exception stack(0xffff0000094039d0 to 0xffff000009403b10) > > > [ 0.000000] 39c0: > > > 0000000000000410 000000000000001e > > > [ 0.000000] 39e0: 000000000000000a ffff7e0025dd0020 > > > ffff7e0025de0020 fffffffffffff1ff > > > [ 0.000000] 3a00: 0000000000000000 ffff0000092cf3a4 > > > 0000000000000000 ffff00000988b728 > > > [ 0.000000] 3a20: ffff00000a174000 ffff000009419fb0 > > > 000000000c67c24e ffff0000095e3198 > > > [ 0.000000] 3a40: ffff0000096833f8 000000000000001a > > > 000000000000001b 000000000000001c > > > [ 0.000000] 3a60: 0000000000000001 ffff0000093ef000 > > > ffff80097ffc7840 ffffffffffffff00 > > > [ 0.000000] 3a80: ffff80097ffc7800 ffff00000940f000 > > > 0000000000000000 00007ff6800387c0 > > > [ 0.000000] 3aa0: ffff80097ffc7700 000000000000000a > > > 0000000000000000 ffff000009403b10 > > > [ 0.000000] 3ac0: ffff0000082594ac ffff000009403b10 > > > ffff0000082594ec 00000000600000c5 > > > [ 0.000000] 3ae0: ffffffffffffff00 ffff80097ffc7800 > > > ffffffffffffffff ffff0000082594ac > > > [ 0.000000] 3b00: ffff000009403b10 ffff0000082594ec > > > [ 0.000000] [<ffff0000082594ec>] __rmqueue+0x3c4/0x908 > > > [ 0.000000] [<ffff000008259e98>] get_page_from_freelist+0x468/0xcb8 > > > [ 0.000000] [<ffff00000825aa3c>] __alloc_pages_nodemask+0x12c/0x1248 > > > [ 0.000000] [<ffff0000082cdba8>] new_slab+0xc0/0x568 > > > [ 0.000000] [<ffff0000082d5328>] __kmem_cache_create+0x2e0/0x628 > > > [ 0.000000] [<ffff000009271dec>] create_boot_cache+0xa8/0xdc > > > [ 0.000000] [<ffff000009275b40>] kmem_cache_init+0x58/0x120 > > > [ 0.000000] [<ffff000009250b3c>] start_kernel+0x200/0x3d8 > > > [ 0.000000] Code: 8b000401 8b010800 d37df000 8b081000 (f9408000) > > > [ 0.000000] random: get_random_bytes called from > > > print_oops_end_marker+0x54/0x70 with crng_init=0 > > > [ 0.000000] ---[ end trace c75a488acdeef932 ]--- > > > [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! > > > [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill > > > the idle task! > > > > > > > > > Full test log link, > > > https://lkft.validation.linaro.org/scheduler/job/1004132#L482 > > > > Any chance you can bisect? > > Reverting 61dbb1f20417 ("mm, meminit: recalculate pcpu batch and high > limits after init completes") got the system working again. Yeah, I messed that one up :( I'm pushing out a -rc2 now to hopefully fix this up, thanks! greg k-h ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: stable-rc 4.14.154-rc1/0d12dcf336c6: regressions detected in project stable v.4.14.y on OE - sanity 2019-11-12 5:17 ` Greg Kroah-Hartman @ 2019-11-12 7:20 ` Naresh Kamboju 2019-11-12 8:51 ` Greg Kroah-Hartman 0 siblings, 1 reply; 6+ messages in thread From: Naresh Kamboju @ 2019-11-12 7:20 UTC (permalink / raw) To: Greg Kroah-Hartman Cc: Daniel Díaz, Sasha Levin, lkft-triage, Dan Rue, Anders Roxell, linux- stable, open list, linux-mm On Tue, 12 Nov 2019 at 11:02, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote: > > > > Any chance you can bisect? > > > > Reverting 61dbb1f20417 ("mm, meminit: recalculate pcpu batch and high > > limits after init completes") got the system working again. > > Yeah, I messed that one up :( > > I'm pushing out a -rc2 now to hopefully fix this up, thanks! The -rc2 boot pass. Full functional testing is in progress. - Naresh ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: stable-rc 4.14.154-rc1/0d12dcf336c6: regressions detected in project stable v.4.14.y on OE - sanity 2019-11-12 7:20 ` Naresh Kamboju @ 2019-11-12 8:51 ` Greg Kroah-Hartman 0 siblings, 0 replies; 6+ messages in thread From: Greg Kroah-Hartman @ 2019-11-12 8:51 UTC (permalink / raw) To: Naresh Kamboju Cc: Daniel Díaz, Sasha Levin, lkft-triage, Dan Rue, Anders Roxell, linux- stable, open list, linux-mm On Tue, Nov 12, 2019 at 12:50:39PM +0530, Naresh Kamboju wrote: > On Tue, 12 Nov 2019 at 11:02, Greg Kroah-Hartman > <gregkh@linuxfoundation.org> wrote: > > > > > > Any chance you can bisect? > > > > > > Reverting 61dbb1f20417 ("mm, meminit: recalculate pcpu batch and high > > > limits after init completes") got the system working again. > > > > Yeah, I messed that one up :( > > > > I'm pushing out a -rc2 now to hopefully fix this up, thanks! > > The -rc2 boot pass. Great! ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-11-12 8:51 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <0100016e5ae0878e-7b9d1bef-b3be-4350-8823-440929ca4a81-000000@email.amazonses.com>
2019-11-11 18:15 ` stable-rc 4.14.154-rc1/0d12dcf336c6: regressions detected in project stable v.4.14.y on OE - sanity Naresh Kamboju
2019-11-11 18:30 ` Greg Kroah-Hartman
2019-11-12 3:19 ` Daniel Díaz
2019-11-12 5:17 ` Greg Kroah-Hartman
2019-11-12 7:20 ` Naresh Kamboju
2019-11-12 8:51 ` Greg Kroah-Hartman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).