[PATCH v2 1/5] ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries

[PATCH v2 1/5] ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries

[Jonathan Bakker]

Since commit 766c6b63aa04 ("spi: fix client driver breakages when using
GPIO descriptors"), the panel has been blank due to an inverted CS GPIO.
In order to correct this, drop the spi-cs-high from the panel SPI device.

Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
---
Changes in v2
- CC Stable
- Put bugfix at start of series
---
 arch/arm/boot/dts/s5pv210-aries.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 160f8cd9a68d..740036a61c8e 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -564,7 +564,6 @@
 			reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
 			vdd3-supply = <&ldo7_reg>;
 			vci-supply = <&ldo17_reg>;
-			spi-cs-high;
 			spi-max-frequency = <1200000>;
 
 			pinctrl-names = "default";
-- 
2.20.1

[PATCH v2 2/5] ARM: dts: s5pv210: Correct interrupt name for bluetooth in Aries

[Jonathan Bakker]

Correct the name of the bluetooth interrupt from host-wake to
host-wakeup.

Fixes: 1c65b6184441b ("ARM: dts: s5pv210: Correct BCM4329 bluetooth node")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
---
Changes in v2
- CC Stable
- Correct Fixes tag by adding commit message
- Re-ordered bugfix to start of patchset
---
 arch/arm/boot/dts/s5pv210-aries.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 740036a61c8e..cbd378ac4e18 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -894,7 +894,7 @@
 		device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
 		interrupt-parent = <&gph2>;
 		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
+		interrupt-names = "host-wakeup";
 	};
 };
 
-- 
2.20.1