Stable Archive on lore.kernel.org
 help / color / Atom feed
* [git:media_tree/master] media: hantro: Fix s_fmt for dynamic resolution changes
@ 2019-11-10 16:48 Mauro Carvalho Chehab
  0 siblings, 0 replies; only message in thread
From: Mauro Carvalho Chehab @ 2019-11-10 16:48 UTC (permalink / raw)
  To: linuxtv-commits; +Cc: Boris Brezillon, stable, Hans Verkuil, Ezequiel Garcia

This is an automatic generated email to let you know that the following patch were queued:

Subject: media: hantro: Fix s_fmt for dynamic resolution changes
Author:  Ezequiel Garcia <ezequiel@collabora.com>
Date:    Mon Oct 7 19:45:02 2019 +0200

Commit 953aaa1492c53 ("media: rockchip/vpu: Prepare things to support decoders")
changed the conditions under S_FMT was allowed for OUTPUT
CAPTURE buffers.

However, and according to the mem-to-mem stateless decoder specification,
in order to support dynamic resolution changes, S_FMT should be allowed
even if OUTPUT buffers have been allocated.

Relax decoder S_FMT restrictions on OUTPUT buffers, allowing a
resolution modification, provided the pixel format stays the same.

Tested on RK3288 platforms using ChromiumOS Video Decode/Encode
Accelerator Unittests.

[hverkuil: fix typo: In other -> In order]

Fixes: 953aaa1492c53 ("media: rockchip/vpu: Prepare things to support decoders")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: <stable@vger.kernel.org>      # for v5.4 and up
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

 drivers/staging/media/hantro/hantro_v4l2.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

---

diff --git a/drivers/staging/media/hantro/hantro_v4l2.c b/drivers/staging/media/hantro/hantro_v4l2.c
index 3dae52abb96c..fcf95c1d39ca 100644
--- a/drivers/staging/media/hantro/hantro_v4l2.c
+++ b/drivers/staging/media/hantro/hantro_v4l2.c
@@ -367,20 +367,27 @@ vidioc_s_fmt_out_mplane(struct file *file, void *priv, struct v4l2_format *f)
 {
 	struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
 	struct hantro_ctx *ctx = fh_to_ctx(priv);
+	struct vb2_queue *vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
 	const struct hantro_fmt *formats;
 	unsigned int num_fmts;
-	struct vb2_queue *vq;
 	int ret;
 
-	/* Change not allowed if queue is busy. */
-	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
-	if (vb2_is_busy(vq))
-		return -EBUSY;
+	ret = vidioc_try_fmt_out_mplane(file, priv, f);
+	if (ret)
+		return ret;
 
 	if (!hantro_is_encoder_ctx(ctx)) {
 		struct vb2_queue *peer_vq;
 
 		/*
+		 * In order to support dynamic resolution change,
+		 * the decoder admits a resolution change, as long
+		 * as the pixelformat remains. Can't be done if streaming.
+		 */
+		if (vb2_is_streaming(vq) || (vb2_is_busy(vq) &&
+		    pix_mp->pixelformat != ctx->src_fmt.pixelformat))
+			return -EBUSY;
+		/*
 		 * Since format change on the OUTPUT queue will reset
 		 * the CAPTURE queue, we can't allow doing so
 		 * when the CAPTURE queue has buffers allocated.
@@ -389,12 +396,15 @@ vidioc_s_fmt_out_mplane(struct file *file, void *priv, struct v4l2_format *f)
 					  V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
 		if (vb2_is_busy(peer_vq))
 			return -EBUSY;
+	} else {
+		/*
+		 * The encoder doesn't admit a format change if
+		 * there are OUTPUT buffers allocated.
+		 */
+		if (vb2_is_busy(vq))
+			return -EBUSY;
 	}
 
-	ret = vidioc_try_fmt_out_mplane(file, priv, f);
-	if (ret)
-		return ret;
-
 	formats = hantro_get_formats(ctx, &num_fmts);
 	ctx->vpu_src_fmt = hantro_find_format(formats, num_fmts,
 					      pix_mp->pixelformat);

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-10 16:48 [git:media_tree/master] media: hantro: Fix s_fmt for dynamic resolution changes Mauro Carvalho Chehab

Stable Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://lore.kernel.org/stable \
		stable@vger.kernel.org
	public-inbox-index stable

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git