* [PATCH 02/12] drm/arm/malidp: Always list modifiers
[not found] <20210413094904.3736372-1-daniel.vetter@ffwll.ch>
@ 2021-04-13 9:48 ` Daniel Vetter
2021-04-13 9:48 ` [PATCH 07/12] drm/msm/mdp4: Fix modifier support enabling Daniel Vetter
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Daniel Vetter @ 2021-04-13 9:48 UTC (permalink / raw)
To: DRI Development
Cc: Intel Graphics Development, Daniel Vetter, stable,
Pekka Paalanen, Liviu Dudau, Brian Starkey, Daniel Vetter
Even when all we support is linear, make that explicit. Otherwise the
uapi is rather confusing.
Cc: stable@vger.kernel.org
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
---
drivers/gpu/drm/arm/malidp_planes.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c
index ddbba67f0283..8c2ab3d653b7 100644
--- a/drivers/gpu/drm/arm/malidp_planes.c
+++ b/drivers/gpu/drm/arm/malidp_planes.c
@@ -927,6 +927,11 @@ static const struct drm_plane_helper_funcs malidp_de_plane_helper_funcs = {
.atomic_disable = malidp_de_plane_disable,
};
+static const uint64_t linear_only_modifiers[] = {
+ DRM_FORMAT_MOD_LINEAR,
+ DRM_FORMAT_MOD_INVALID
+};
+
int malidp_de_planes_init(struct drm_device *drm)
{
struct malidp_drm *malidp = drm->dev_private;
@@ -990,8 +995,8 @@ int malidp_de_planes_init(struct drm_device *drm)
*/
ret = drm_universal_plane_init(drm, &plane->base, crtcs,
&malidp_de_plane_funcs, formats, n,
- (id == DE_SMART) ? NULL : modifiers, plane_type,
- NULL);
+ (id == DE_SMART) ? linear_only_modifiers : modifiers,
+ plane_type, NULL);
if (ret < 0)
goto cleanup;
--
2.31.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 07/12] drm/msm/mdp4: Fix modifier support enabling
[not found] <20210413094904.3736372-1-daniel.vetter@ffwll.ch>
2021-04-13 9:48 ` [PATCH 02/12] drm/arm/malidp: Always list modifiers Daniel Vetter
@ 2021-04-13 9:48 ` Daniel Vetter
2021-04-13 9:48 ` [PATCH 08/12] drm/nouveau: Don't set allow_fb_modifiers explicitly Daniel Vetter
2021-04-13 9:49 ` [PATCH 10/12] drm/tegra: " Daniel Vetter
3 siblings, 0 replies; 6+ messages in thread
From: Daniel Vetter @ 2021-04-13 9:48 UTC (permalink / raw)
To: DRI Development
Cc: Intel Graphics Development, Daniel Vetter, stable,
Pekka Paalanen, Rob Clark, Jordan Crouse, Emil Velikov,
Sam Ravnborg, Daniel Vetter
Setting the cap without the modifier list is very confusing to
userspace. Fix that by listing the ones we support explicitly.
Stable backport so that userspace can rely on this working in a
reasonable way, i.e. that the cap set implies IN_FORMATS is available.
Cc: stable@vger.kernel.org
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
---
drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c | 2 --
drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c | 8 +++++++-
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c b/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c
index 3d729270bde1..4a5b518288b0 100644
--- a/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c
+++ b/drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c
@@ -88,8 +88,6 @@ static int mdp4_hw_init(struct msm_kms *kms)
if (mdp4_kms->rev > 1)
mdp4_write(mdp4_kms, REG_MDP4_RESET_STATUS, 1);
- dev->mode_config.allow_fb_modifiers = true;
-
out:
pm_runtime_put_sync(dev->dev);
diff --git a/drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c b/drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c
index 9aecca919f24..49bdabea8ed5 100644
--- a/drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c
+++ b/drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c
@@ -349,6 +349,12 @@ enum mdp4_pipe mdp4_plane_pipe(struct drm_plane *plane)
return mdp4_plane->pipe;
}
+static const uint64_t supported_format_modifiers[] = {
+ DRM_FORMAT_MOD_SAMSUNG_64_32_TILE,
+ DRM_FORMAT_MOD_LINEAR,
+ DRM_FORMAT_MOD_INVALID
+};
+
/* initialize plane */
struct drm_plane *mdp4_plane_init(struct drm_device *dev,
enum mdp4_pipe pipe_id, bool private_plane)
@@ -377,7 +383,7 @@ struct drm_plane *mdp4_plane_init(struct drm_device *dev,
type = private_plane ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
ret = drm_universal_plane_init(dev, plane, 0xff, &mdp4_plane_funcs,
mdp4_plane->formats, mdp4_plane->nformats,
- NULL, type, NULL);
+ supported_format_modifiers, type, NULL);
if (ret)
goto fail;
--
2.31.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 08/12] drm/nouveau: Don't set allow_fb_modifiers explicitly
[not found] <20210413094904.3736372-1-daniel.vetter@ffwll.ch>
2021-04-13 9:48 ` [PATCH 02/12] drm/arm/malidp: Always list modifiers Daniel Vetter
2021-04-13 9:48 ` [PATCH 07/12] drm/msm/mdp4: Fix modifier support enabling Daniel Vetter
@ 2021-04-13 9:48 ` Daniel Vetter
2021-04-13 9:49 ` [PATCH 10/12] drm/tegra: " Daniel Vetter
3 siblings, 0 replies; 6+ messages in thread
From: Daniel Vetter @ 2021-04-13 9:48 UTC (permalink / raw)
To: DRI Development
Cc: Intel Graphics Development, Daniel Vetter, stable,
Pekka Paalanen, Daniel Vetter, Ben Skeggs, nouveau
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Note that this fixes an inconsistency: We've set the cap everywhere,
but only nv50+ supports modifiers. Hence cc stable, but not further
back then the patch from Paul.
Cc: stable@vger.kernel.org # v5.1 +
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
---
drivers/gpu/drm/nouveau/nouveau_display.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index 14101bd2a0ff..929de41c281f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -697,7 +697,6 @@ nouveau_display_create(struct drm_device *dev)
dev->mode_config.preferred_depth = 24;
dev->mode_config.prefer_shadow = 1;
- dev->mode_config.allow_fb_modifiers = true;
if (drm->client.device.info.chipset < 0x11)
dev->mode_config.async_page_flip = false;
--
2.31.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 10/12] drm/tegra: Don't set allow_fb_modifiers explicitly
[not found] <20210413094904.3736372-1-daniel.vetter@ffwll.ch>
` (2 preceding siblings ...)
2021-04-13 9:48 ` [PATCH 08/12] drm/nouveau: Don't set allow_fb_modifiers explicitly Daniel Vetter
@ 2021-04-13 9:49 ` Daniel Vetter
2021-04-13 11:37 ` Thierry Reding
3 siblings, 1 reply; 6+ messages in thread
From: Daniel Vetter @ 2021-04-13 9:49 UTC (permalink / raw)
To: DRI Development
Cc: Intel Graphics Development, Daniel Vetter, stable,
Pekka Paalanen, Daniel Vetter, Thierry Reding, Jonathan Hunter,
linux-tegra
Since
commit 890880ddfdbe256083170866e49c87618b706ac7
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date: Fri Jan 4 09:56:10 2019 +0100
drm: Auto-set allow_fb_modifiers when given modifiers at plane init
this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
It was slightly inconsistently though, since planes with only linear
modifier support haven't listed that explicitly. Fix that, and cc:
stable to allow userspace to rely on this. Again don't backport
further than where Paul's patch got added.
Cc: stable@vger.kernel.org # v5.1 +
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
---
drivers/gpu/drm/tegra/dc.c | 10 ++++++++--
drivers/gpu/drm/tegra/drm.c | 2 --
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index c9385cfd0fc1..f9845a50f866 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -959,6 +959,11 @@ static const struct drm_plane_helper_funcs tegra_cursor_plane_helper_funcs = {
.atomic_disable = tegra_cursor_atomic_disable,
};
+static const uint64_t linear_modifiers[] = {
+ DRM_FORMAT_MOD_LINEAR,
+ DRM_FORMAT_MOD_INVALID
+};
+
static struct drm_plane *tegra_dc_cursor_plane_create(struct drm_device *drm,
struct tegra_dc *dc)
{
@@ -987,7 +992,7 @@ static struct drm_plane *tegra_dc_cursor_plane_create(struct drm_device *drm,
err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
&tegra_plane_funcs, formats,
- num_formats, NULL,
+ num_formats, linear_modifiers,
DRM_PLANE_TYPE_CURSOR, NULL);
if (err < 0) {
kfree(plane);
@@ -1106,7 +1111,8 @@ static struct drm_plane *tegra_dc_overlay_plane_create(struct drm_device *drm,
err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
&tegra_plane_funcs, formats,
- num_formats, NULL, type, NULL);
+ num_formats, linear_modifiers,
+ type, NULL);
if (err < 0) {
kfree(plane);
return ERR_PTR(err);
diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c
index 90709c38c993..136fe98f9459 100644
--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -1125,8 +1125,6 @@ static int host1x_drm_probe(struct host1x_device *dev)
drm->mode_config.max_width = 4096;
drm->mode_config.max_height = 4096;
- drm->mode_config.allow_fb_modifiers = true;
-
drm->mode_config.normalize_zpos = true;
drm->mode_config.funcs = &tegra_drm_mode_config_funcs;
--
2.31.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 10/12] drm/tegra: Don't set allow_fb_modifiers explicitly
2021-04-13 9:49 ` [PATCH 10/12] drm/tegra: " Daniel Vetter
@ 2021-04-13 11:37 ` Thierry Reding
2021-04-15 11:33 ` Daniel Vetter
0 siblings, 1 reply; 6+ messages in thread
From: Thierry Reding @ 2021-04-13 11:37 UTC (permalink / raw)
To: Daniel Vetter
Cc: DRI Development, Intel Graphics Development, stable,
Pekka Paalanen, Daniel Vetter, Jonathan Hunter, linux-tegra
[-- Attachment #1: Type: text/plain, Size: 2669 bytes --]
On Tue, Apr 13, 2021 at 11:49:01AM +0200, Daniel Vetter wrote:
> Since
>
> commit 890880ddfdbe256083170866e49c87618b706ac7
> Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> Date: Fri Jan 4 09:56:10 2019 +0100
>
> drm: Auto-set allow_fb_modifiers when given modifiers at plane init
>
> this is done automatically as part of plane init, if drivers set the
> modifier list correctly. Which is the case here.
>
> It was slightly inconsistently though, since planes with only linear
> modifier support haven't listed that explicitly. Fix that, and cc:
> stable to allow userspace to rely on this. Again don't backport
> further than where Paul's patch got added.
>
> Cc: stable@vger.kernel.org # v5.1 +
> Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Jonathan Hunter <jonathanh@nvidia.com>
> Cc: linux-tegra@vger.kernel.org
> ---
> drivers/gpu/drm/tegra/dc.c | 10 ++++++++--
> drivers/gpu/drm/tegra/drm.c | 2 --
> 2 files changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
> index c9385cfd0fc1..f9845a50f866 100644
> --- a/drivers/gpu/drm/tegra/dc.c
> +++ b/drivers/gpu/drm/tegra/dc.c
> @@ -959,6 +959,11 @@ static const struct drm_plane_helper_funcs tegra_cursor_plane_helper_funcs = {
> .atomic_disable = tegra_cursor_atomic_disable,
> };
>
> +static const uint64_t linear_modifiers[] = {
> + DRM_FORMAT_MOD_LINEAR,
> + DRM_FORMAT_MOD_INVALID
> +};
> +
> static struct drm_plane *tegra_dc_cursor_plane_create(struct drm_device *drm,
> struct tegra_dc *dc)
> {
> @@ -987,7 +992,7 @@ static struct drm_plane *tegra_dc_cursor_plane_create(struct drm_device *drm,
>
> err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
> &tegra_plane_funcs, formats,
> - num_formats, NULL,
> + num_formats, linear_modifiers,
> DRM_PLANE_TYPE_CURSOR, NULL);
> if (err < 0) {
> kfree(plane);
> @@ -1106,7 +1111,8 @@ static struct drm_plane *tegra_dc_overlay_plane_create(struct drm_device *drm,
>
> err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
> &tegra_plane_funcs, formats,
> - num_formats, NULL, type, NULL);
> + num_formats, linear_modifiers,
> + type, NULL);
I think we can do better than linear_modifiers for overlay planes, but
given that this doesn't change existing behaviour, I'll do that in a
separate patch.
Acked-by: Thierry Reding <treding@nvidia.com>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 10/12] drm/tegra: Don't set allow_fb_modifiers explicitly
2021-04-13 11:37 ` Thierry Reding
@ 2021-04-15 11:33 ` Daniel Vetter
0 siblings, 0 replies; 6+ messages in thread
From: Daniel Vetter @ 2021-04-15 11:33 UTC (permalink / raw)
To: Thierry Reding
Cc: Daniel Vetter, DRI Development, Intel Graphics Development,
stable, Pekka Paalanen, Daniel Vetter, Jonathan Hunter,
linux-tegra
On Tue, Apr 13, 2021 at 01:37:38PM +0200, Thierry Reding wrote:
> On Tue, Apr 13, 2021 at 11:49:01AM +0200, Daniel Vetter wrote:
> > Since
> >
> > commit 890880ddfdbe256083170866e49c87618b706ac7
> > Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > Date: Fri Jan 4 09:56:10 2019 +0100
> >
> > drm: Auto-set allow_fb_modifiers when given modifiers at plane init
> >
> > this is done automatically as part of plane init, if drivers set the
> > modifier list correctly. Which is the case here.
> >
> > It was slightly inconsistently though, since planes with only linear
> > modifier support haven't listed that explicitly. Fix that, and cc:
> > stable to allow userspace to rely on this. Again don't backport
> > further than where Paul's patch got added.
> >
> > Cc: stable@vger.kernel.org # v5.1 +
> > Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
> > Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> > Cc: Thierry Reding <thierry.reding@gmail.com>
> > Cc: Jonathan Hunter <jonathanh@nvidia.com>
> > Cc: linux-tegra@vger.kernel.org
> > ---
> > drivers/gpu/drm/tegra/dc.c | 10 ++++++++--
> > drivers/gpu/drm/tegra/drm.c | 2 --
> > 2 files changed, 8 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
> > index c9385cfd0fc1..f9845a50f866 100644
> > --- a/drivers/gpu/drm/tegra/dc.c
> > +++ b/drivers/gpu/drm/tegra/dc.c
> > @@ -959,6 +959,11 @@ static const struct drm_plane_helper_funcs tegra_cursor_plane_helper_funcs = {
> > .atomic_disable = tegra_cursor_atomic_disable,
> > };
> >
> > +static const uint64_t linear_modifiers[] = {
> > + DRM_FORMAT_MOD_LINEAR,
> > + DRM_FORMAT_MOD_INVALID
> > +};
> > +
> > static struct drm_plane *tegra_dc_cursor_plane_create(struct drm_device *drm,
> > struct tegra_dc *dc)
> > {
> > @@ -987,7 +992,7 @@ static struct drm_plane *tegra_dc_cursor_plane_create(struct drm_device *drm,
> >
> > err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
> > &tegra_plane_funcs, formats,
> > - num_formats, NULL,
> > + num_formats, linear_modifiers,
> > DRM_PLANE_TYPE_CURSOR, NULL);
> > if (err < 0) {
> > kfree(plane);
> > @@ -1106,7 +1111,8 @@ static struct drm_plane *tegra_dc_overlay_plane_create(struct drm_device *drm,
> >
> > err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
> > &tegra_plane_funcs, formats,
> > - num_formats, NULL, type, NULL);
> > + num_formats, linear_modifiers,
> > + type, NULL);
>
> I think we can do better than linear_modifiers for overlay planes, but
> given that this doesn't change existing behaviour, I'll do that in a
> separate patch.
>
> Acked-by: Thierry Reding <treding@nvidia.com>
Applied to drm-misc-next, thanks for taking a look.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-04-15 11:33 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20210413094904.3736372-1-daniel.vetter@ffwll.ch>
2021-04-13 9:48 ` [PATCH 02/12] drm/arm/malidp: Always list modifiers Daniel Vetter
2021-04-13 9:48 ` [PATCH 07/12] drm/msm/mdp4: Fix modifier support enabling Daniel Vetter
2021-04-13 9:48 ` [PATCH 08/12] drm/nouveau: Don't set allow_fb_modifiers explicitly Daniel Vetter
2021-04-13 9:49 ` [PATCH 10/12] drm/tegra: " Daniel Vetter
2021-04-13 11:37 ` Thierry Reding
2021-04-15 11:33 ` Daniel Vetter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).