* [PATCH] Revert "ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode"
@ 2022-03-08 12:55 Petr Štetiar
2022-03-15 7:28 ` Petr Štetiar
0 siblings, 1 reply; 5+ messages in thread
From: Petr Štetiar @ 2022-03-08 12:55 UTC (permalink / raw)
To: Rob Herring, Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec
Cc: Petr Štetiar, stable, Bastien Roucariès, devicetree,
linux-arm-kernel, linux-sunxi, linux-kernel
This reverts commit 55dd7e059098ce4bd0a55c251cb78e74604abb57 as it
breaks network on my A20-olinuxino-lime2 hardware revision "K" which has
Micrel KSZ9031RNXCC-TR Gigabit PHY. Bastien has probably some previous
hardware revisions which were based on RTL8211E-VB-CG1 PHY and thus this
fix was working on his board.
Cc: stable@vger.kernel.org
Cc: Bastien Roucariès <rouca@debian.org>
References: https://github.com/openwrt/openwrt/issues/9153
References: https://github.com/OLIMEX/OLINUXINO/blob/master/HARDWARE/A20-OLinuXino-LIME2/hardware_revision_changes_log.txt
Signed-off-by: Petr Štetiar <ynezz@true.cz>
---
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index ecb91fb899ff..8077f1716fbc 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -112,7 +112,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii-id";
+ phy-mode = "rgmii";
status = "okay";
};
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] Revert "ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode"
2022-03-08 12:55 [PATCH] Revert "ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode" Petr Štetiar
@ 2022-03-15 7:28 ` Petr Štetiar
2022-03-15 7:37 ` Corentin Labbe
2022-03-15 7:51 ` Greg Kroah-Hartman
0 siblings, 2 replies; 5+ messages in thread
From: Petr Štetiar @ 2022-03-15 7:28 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Maxime Ripard, Bastien Roucariès, Chen-Yu Tsai,
Jernej Skrabec, Rob Herring, stable, devicetree,
linux-arm-kernel, linux-sunxi, linux-kernel
Petr Štetiar <ynezz@true.cz> [2022-03-08 13:55:30]:
Hi Greg,
one week has passed and as I didn't received any feedback, I'm providing more
details in a hope to make it more clear, why I think, that this fix is wrong
and should be reverted in LTS kernels 5.10 and 5.15.
> This reverts commit 55dd7e059098ce4bd0a55c251cb78e74604abb57 as it breaks
> network on my A20-olinuxino-lime2 hardware revision "K" which has Micrel
> KSZ9031RNXCC-TR Gigabit PHY. Bastien has probably some previous hardware
> revisions which were based on RTL8211E-VB-CG1 PHY and thus this fix was
> working on his board.
Disclaimer, I don't own A20-olinuxino-lime2 board with earlier HW revisions
G/G1/G2 utilizing RTL8211E PHY.
My understanding is, that up to kernel version 5.9 and specifically commit
bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") it was
likely possible to use same DTS for A20-olinuxino-lime2 with KSZ9031 or
RTL8211E PHYs (all HW revisions).
At least I was using my A20-olinuxino-lime2 HW revision K with KSZ9031 PHY
just fine with 4.19 kernel. After upgrade to 5.10 LTS kernel my network
stopped working, reverting stable backport commit a90398438517 ("ARM: dts:
sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode") fixed it.
From my POV proper fix for earlier HW revisions G/G1/G2 is introduction of
sun7i-a20-olinuxino-lime2-revG.dts with a proper `phy-mode` for RTL8211E PHY.
Cheers,
Petr
> Cc: stable@vger.kernel.org
> Cc: Bastien Roucariès <rouca@debian.org>
> References: https://github.com/openwrt/openwrt/issues/9153
> References: https://github.com/OLIMEX/OLINUXINO/blob/master/HARDWARE/A20-OLinuXino-LIME2/hardware_revision_changes_log.txt
> Signed-off-by: Petr Štetiar <ynezz@true.cz>
> ---
> arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> index ecb91fb899ff..8077f1716fbc 100644
> --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> @@ -112,7 +112,7 @@ &gmac {
> pinctrl-names = "default";
> pinctrl-0 = <&gmac_rgmii_pins>;
> phy-handle = <&phy1>;
> - phy-mode = "rgmii-id";
> + phy-mode = "rgmii";
> status = "okay";
> };
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] Revert "ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode"
2022-03-15 7:28 ` Petr Štetiar
@ 2022-03-15 7:37 ` Corentin Labbe
2022-03-15 8:02 ` Petr Štetiar
2022-03-15 7:51 ` Greg Kroah-Hartman
1 sibling, 1 reply; 5+ messages in thread
From: Corentin Labbe @ 2022-03-15 7:37 UTC (permalink / raw)
To: Petr Štetiar
Cc: Greg Kroah-Hartman, Maxime Ripard, Bastien Roucariès,
Chen-Yu Tsai, Jernej Skrabec, Rob Herring, stable, devicetree,
linux-arm-kernel, linux-sunxi, linux-kernel
Le Tue, Mar 15, 2022 at 08:28:58AM +0100, Petr Štetiar a écrit :
> Petr Štetiar <ynezz@true.cz> [2022-03-08 13:55:30]:
>
> Hi Greg,
>
> one week has passed and as I didn't received any feedback, I'm providing more
> details in a hope to make it more clear, why I think, that this fix is wrong
> and should be reverted in LTS kernels 5.10 and 5.15.
>
> > This reverts commit 55dd7e059098ce4bd0a55c251cb78e74604abb57 as it breaks
> > network on my A20-olinuxino-lime2 hardware revision "K" which has Micrel
> > KSZ9031RNXCC-TR Gigabit PHY. Bastien has probably some previous hardware
> > revisions which were based on RTL8211E-VB-CG1 PHY and thus this fix was
> > working on his board.
>
> Disclaimer, I don't own A20-olinuxino-lime2 board with earlier HW revisions
> G/G1/G2 utilizing RTL8211E PHY.
>
> My understanding is, that up to kernel version 5.9 and specifically commit
> bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") it was
> likely possible to use same DTS for A20-olinuxino-lime2 with KSZ9031 or
> RTL8211E PHYs (all HW revisions).
>
> At least I was using my A20-olinuxino-lime2 HW revision K with KSZ9031 PHY
> just fine with 4.19 kernel. After upgrade to 5.10 LTS kernel my network
> stopped working, reverting stable backport commit a90398438517 ("ARM: dts:
> sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode") fixed it.
>
> From my POV proper fix for earlier HW revisions G/G1/G2 is introduction of
> sun7i-a20-olinuxino-lime2-revG.dts with a proper `phy-mode` for RTL8211E PHY.
>
> Cheers,
>
> Petr
>
Hello
If your patch is applied, older revisions will stop working, right ?
What about adding a new dtb like sun7i-a20-olinuxino-lime2-revk.dts ?
Regards
> > Cc: stable@vger.kernel.org
> > Cc: Bastien Roucariès <rouca@debian.org>
> > References: https://github.com/openwrt/openwrt/issues/9153
> > References: https://github.com/OLIMEX/OLINUXINO/blob/master/HARDWARE/A20-OLinuXino-LIME2/hardware_revision_changes_log.txt
> > Signed-off-by: Petr Štetiar <ynezz@true.cz>
> > ---
> > arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> > index ecb91fb899ff..8077f1716fbc 100644
> > --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> > +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> > @@ -112,7 +112,7 @@ &gmac {
> > pinctrl-names = "default";
> > pinctrl-0 = <&gmac_rgmii_pins>;
> > phy-handle = <&phy1>;
> > - phy-mode = "rgmii-id";
> > + phy-mode = "rgmii";
> > status = "okay";
> > };
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] Revert "ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode"
2022-03-15 7:28 ` Petr Štetiar
2022-03-15 7:37 ` Corentin Labbe
@ 2022-03-15 7:51 ` Greg Kroah-Hartman
1 sibling, 0 replies; 5+ messages in thread
From: Greg Kroah-Hartman @ 2022-03-15 7:51 UTC (permalink / raw)
To: Petr Štetiar
Cc: Maxime Ripard, Bastien Roucariès, Chen-Yu Tsai,
Jernej Skrabec, Rob Herring, stable, devicetree,
linux-arm-kernel, linux-sunxi, linux-kernel
On Tue, Mar 15, 2022 at 08:28:58AM +0100, Petr Štetiar wrote:
> Petr Štetiar <ynezz@true.cz> [2022-03-08 13:55:30]:
>
> Hi Greg,
>
> one week has passed and as I didn't received any feedback, I'm providing more
> details in a hope to make it more clear, why I think, that this fix is wrong
> and should be reverted in LTS kernels 5.10 and 5.15.
Why not reverted in Linus's tree first? Shouldn't that be also broken
here?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] Revert "ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode"
2022-03-15 7:37 ` Corentin Labbe
@ 2022-03-15 8:02 ` Petr Štetiar
0 siblings, 0 replies; 5+ messages in thread
From: Petr Štetiar @ 2022-03-15 8:02 UTC (permalink / raw)
To: Corentin Labbe
Cc: Greg Kroah-Hartman, Maxime Ripard, Bastien Roucariès,
Chen-Yu Tsai, Jernej Skrabec, Rob Herring, stable, devicetree,
linux-arm-kernel, linux-sunxi, linux-kernel
Corentin Labbe <clabbe.montjoie@gmail.com> [2022-03-15 08:37:06]:
Hi,
> If your patch is applied, older revisions will stop working, right ?
correct, in the same way new revisions stopped working when that wrong fix was
applied.
> What about adding a new dtb like sun7i-a20-olinuxino-lime2-revk.dts ?
From my POV proper fix for earlier HW revisions G/G1/G2 is introduction of
sun7i-a20-olinuxino-lime2-revG.dts with a proper `phy-mode` for RTL8211E PHY.
Cheers,
Petr
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-03-15 8:02 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-08 12:55 [PATCH] Revert "ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode" Petr Štetiar
2022-03-15 7:28 ` Petr Štetiar
2022-03-15 7:37 ` Corentin Labbe
2022-03-15 8:02 ` Petr Štetiar
2022-03-15 7:51 ` Greg Kroah-Hartman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).