[PATCH 5.10 00/71] 5.10.106-rc1 review

[PATCH 5.10 00/71] 5.10.106-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.10.106 release.
There are 71 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 16 Mar 2022 11:27:22 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.106-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.106-rc1

David Howells <dhowells@redhat.com>
    watch_queue: Fix filter limit check

Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
    ARM: fix Thumb2 regression with Spectre BHB

Josh Triplett <josh@joshtriplett.org>
    ext4: add check to prevent attempting to resize an fs with sparse_super2

Li Huafei <lihuafei1@huawei.com>
    x86/traps: Mark do_int3() NOKPROBE_SYMBOL

Ross Philipson <ross.philipson@oracle.com>
    x86/boot: Add setup_indirect support in early_memremap_is_setup_data()

Ross Philipson <ross.philipson@oracle.com>
    x86/boot: Fix memremap of setup_indirect structures

David Howells <dhowells@redhat.com>
    watch_queue: Make comment about setting ->defunct more accurate

David Howells <dhowells@redhat.com>
    watch_queue: Fix lack of barrier/sync/lock between post and read

David Howells <dhowells@redhat.com>
    watch_queue: Free the alloc bitmap when the watch_queue is torn down

David Howells <dhowells@redhat.com>
    watch_queue: Fix the alloc bitmap size to reflect notes allocated

David Howells <dhowells@redhat.com>
    watch_queue: Fix to always request a pow-of-2 pipe ring size

David Howells <dhowells@redhat.com>
    watch_queue: Fix to release page in ->release()

David Howells <dhowells@redhat.com>
    watch_queue, pipe: Free watchqueue state after clearing pipe ring

Michael S. Tsirkin <mst@redhat.com>
    virtio: acknowledge all features before access

Michael S. Tsirkin <mst@redhat.com>
    virtio: unexport virtio_finalize_features

Pali Rohár <pali@kernel.org>
    arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0

Emil Renner Berthing <kernel@esmil.dk>
    riscv: Fix auipc+jalr relocation range checks

Rong Chen <rong.chen@amlogic.com>
    mmc: meson: Fix usage of meson_mmc_post_req()

Robert Hancock <robert.hancock@calian.com>
    net: macb: Fix lost RX packet wakeup race in NAPI receive

Dan Carpenter <dan.carpenter@oracle.com>
    staging: gdm724x: fix use after free in gdm_lte_rx()

Hans de Goede <hdegoede@redhat.com>
    staging: rtl8723bs: Fix access-point mode deadlock

Miklos Szeredi <mszeredi@redhat.com>
    fuse: fix pipe buffer lifetime for direct_io

Randy Dunlap <rdunlap@infradead.org>
    ARM: Spectre-BHB: provide empty stub for non-config

Mike Kravetz <mike.kravetz@oracle.com>
    selftests/memfd: clean up mapping in mfd_fail_write

Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
    selftest/vm: fix map_fixed_noreplace test failure

Sven Schnelle <svens@linux.ibm.com>
    tracing: Ensure trace buffer is at least 4096 bytes large

Niels Dossche <dossche.niels@gmail.com>
    ipv6: prevent a possible race condition with lifetimes

Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
    Revert "xen-netback: Check for hotplug-status existence before watching"

Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
    Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"

Shreeya Patel <shreeya.patel@collabora.com>
    gpio: Return EPROBE_DEFER if gc->to_irq is NULL

Vikash Chandola <vikash.chandola@linux.intel.com>
    hwmon: (pmbus) Clear pmbus fault/warning bits after read

suresh kumar <suresh2514@gmail.com>
    net-sysfs: add check for netdevice being present to speed_show

Jon Lin <jon.lin@rock-chips.com>
    spi: rockchip: terminate dma transmission when slave abort

Jon Lin <jon.lin@rock-chips.com>
    spi: rockchip: Fix error in getting num-cs property

Kumar Kartikeya Dwivedi <memxor@gmail.com>
    selftests/bpf: Add test for bpf_timer overwriting crash

Jeremy Linton <jeremy.linton@arm.com>
    net: bcmgenet: Don't claim WOL when its not available

Eric Dumazet <edumazet@google.com>
    sctp: fix kernel-infoleak for SCTP sockets

Clément Léger <clement.leger@bootlin.com>
    net: phy: DP83822: clear MISR2 register to disable interrupts

Miaoqian Lin <linmq006@gmail.com>
    gianfar: ethtool: Fix refcount leak in gfar_get_ts_info

Mark Featherston <mark@embeddedTS.com>
    gpio: ts4900: Do not set DAT and OE together

Guillaume Nault <gnault@redhat.com>
    selftests: pmtu.sh: Kill tcpdump processes launched by subshell.

Pavel Skripkin <paskripkin@gmail.com>
    NFC: port100: fix use-after-free in port100_send_complete

Roi Dayan <roid@nvidia.com>
    net/mlx5e: Lag, Only handle events from highest priority multipath entry

Moshe Shemesh <moshe@nvidia.com>
    net/mlx5: Fix a race on command flush flow

Mohammad Kabat <mohammadkab@nvidia.com>
    net/mlx5: Fix size field in bufferx_reg struct

Duoming Zhou <duoming@zju.edu.cn>
    ax25: Fix NULL pointer dereference in ax25_kill_by_device

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    net: ethernet: lpc_eth: Handle error for clk_enable

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    net: ethernet: ti: cpts: Handle error for clk_enable

Tung Nguyen <tung.q.nguyen@dektech.com.au>
    tipc: fix incorrect order of state message data sanity check

Miaoqian Lin <linmq006@gmail.com>
    ethernet: Fix error handling in xemaclite_of_probe

Jedrzej Jagielski <jedrzej.jagielski@intel.com>
    ice: Fix curr_link_speed advertised speed

Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
    ice: Rename a couple of variables

Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
    ice: Remove unnecessary checker loop

Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
    ice: Align macro names to the specification

Jacob Keller <jacob.e.keller@intel.com>
    ice: stop disabling VFs due to PF error responses

Jacob Keller <jacob.e.keller@intel.com>
    i40e: stop disabling VFs due to PF error responses

Joel Stanley <joel@jms.id.au>
    ARM: dts: aspeed: Fix AST2600 quad spi group

Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
    net: dsa: mt7530: fix incorrect test in mt753x_phylink_validate()

Jernej Skrabec <jernej.skrabec@gmail.com>
    drm/sun4i: mixer: Fix P010 and P210 format numbers

Tom Rix <trix@redhat.com>
    qed: return status of qed_iov_get_link

Steffen Klassert <steffen.klassert@secunet.com>
    esp: Fix BEET mode inter address family tunneling on GSO

Jia-Ju Bai <baijiaju1990@gmail.com>
    net: qlogic: check the return value of dma_alloc_coherent() in qed_vf_hw_prepare()

Jia-Ju Bai <baijiaju1990@gmail.com>
    isdn: hfcpci: check the return value of dma_set_mask() in setup_hw()

Xie Yongji <xieyongji@bytedance.com>
    virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero

Alexey Khoroshilov <khoroshilov@ispras.ru>
    mISDN: Fix memory leak in dsp_pipeline_build()

Zhen Lei <thunder.leizhen@huawei.com>
    mISDN: Remove obsolete PIPELINE_DEBUG debugging information

Tung Nguyen <tung.q.nguyen@dektech.com.au>
    tipc: fix kernel panic when enabling bearer

Pali Rohár <pali@kernel.org>
    arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    HID: vivaldi: fix sysfs attributes leak

Taniya Das <tdas@codeaurora.org>
    clk: qcom: gdsc: Add support to update GDSC transition delay

Maxime Ripard <maxime@cerno.tech>
    ARM: boot: dts: bcm2711: Fix HVS register range


-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi           |  2 +-
 arch/arm/boot/dts/bcm2711.dtsi                     |  1 +
 arch/arm/include/asm/spectre.h                     |  6 ++
 arch/arm/kernel/entry-armv.S                       |  4 +-
 .../boot/dts/marvell/armada-3720-turris-mox.dts    |  8 ++-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi       |  2 +-
 arch/riscv/kernel/module.c                         | 21 ++++--
 arch/x86/kernel/e820.c                             | 41 ++++++++----
 arch/x86/kernel/kdebugfs.c                         | 37 ++++++++---
 arch/x86/kernel/ksysfs.c                           | 77 +++++++++++++++++-----
 arch/x86/kernel/setup.c                            | 34 ++++++++--
 arch/x86/kernel/traps.c                            |  1 +
 arch/x86/mm/ioremap.c                              | 57 ++++++++++++++--
 drivers/block/virtio_blk.c                         | 10 ++-
 drivers/clk/qcom/gdsc.c                            | 26 ++++++--
 drivers/clk/qcom/gdsc.h                            |  8 ++-
 drivers/gpio/gpio-ts4900.c                         | 24 +++++--
 drivers/gpio/gpiolib.c                             | 10 +++
 drivers/gpu/drm/sun4i/sun8i_mixer.h                |  8 +--
 drivers/hid/hid-vivaldi.c                          |  2 +-
 drivers/hwmon/pmbus/pmbus_core.c                   |  5 ++
 drivers/isdn/hardware/mISDN/hfcpci.c               |  6 +-
 drivers/isdn/mISDN/dsp_pipeline.c                  | 52 ++-------------
 drivers/mmc/host/meson-gx-mmc.c                    | 15 +++--
 drivers/net/dsa/mt7530.c                           |  2 +-
 drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c |  7 ++
 drivers/net/ethernet/cadence/macb_main.c           | 25 ++++++-
 drivers/net/ethernet/freescale/gianfar_ethtool.c   |  1 +
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     |  6 +-
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 57 ++--------------
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h |  5 --
 drivers/net/ethernet/intel/ice/ice_adminq_cmd.h    | 10 +--
 drivers/net/ethernet/intel/ice/ice_common.c        | 13 ++--
 drivers/net/ethernet/intel/ice/ice_ethtool.c       | 70 +++++++++-----------
 drivers/net/ethernet/intel/ice/ice_main.c          | 12 ++--
 drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c   | 18 -----
 drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h   |  3 -
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c      | 15 +++--
 drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c   | 11 +++-
 drivers/net/ethernet/nxp/lpc_eth.c                 |  5 +-
 drivers/net/ethernet/qlogic/qed/qed_sriov.c        | 18 +++--
 drivers/net/ethernet/qlogic/qed/qed_vf.c           |  7 ++
 drivers/net/ethernet/ti/cpts.c                     |  4 +-
 drivers/net/ethernet/xilinx/xilinx_emaclite.c      |  4 +-
 drivers/net/phy/dp83822.c                          |  2 +-
 drivers/net/xen-netback/xenbus.c                   | 14 ++--
 drivers/nfc/port100.c                              |  2 +
 drivers/spi/spi-rockchip.c                         | 13 +++-
 drivers/staging/gdm724x/gdm_lte.c                  |  5 +-
 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c      |  7 +-
 drivers/staging/rtl8723bs/core/rtw_recv.c          | 10 ++-
 drivers/staging/rtl8723bs/core/rtw_sta_mgt.c       | 22 +++----
 drivers/staging/rtl8723bs/core/rtw_xmit.c          | 16 +++--
 drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c     |  2 +
 drivers/virtio/virtio.c                            | 40 ++++++-----
 fs/ext4/resize.c                                   |  5 ++
 fs/fuse/dev.c                                      | 12 +++-
 fs/fuse/file.c                                     |  1 +
 fs/fuse/fuse_i.h                                   |  1 +
 fs/pipe.c                                          | 11 ++--
 include/linux/mlx5/mlx5_ifc.h                      |  4 +-
 include/linux/virtio.h                             |  1 -
 include/linux/virtio_config.h                      |  3 +-
 include/linux/watch_queue.h                        |  3 +-
 kernel/trace/trace.c                               | 10 +--
 kernel/watch_queue.c                               | 15 +++--
 net/ax25/af_ax25.c                                 |  7 ++
 net/core/net-sysfs.c                               |  2 +-
 net/ipv4/esp4_offload.c                            |  3 +
 net/ipv6/addrconf.c                                |  2 +
 net/ipv6/esp6_offload.c                            |  3 +
 net/sctp/diag.c                                    |  9 +--
 net/tipc/bearer.c                                  | 12 ++--
 net/tipc/link.c                                    |  9 +--
 .../testing/selftests/bpf/prog_tests/timer_crash.c | 32 +++++++++
 tools/testing/selftests/bpf/progs/timer_crash.c    | 54 +++++++++++++++
 tools/testing/selftests/memfd/memfd_test.c         |  1 +
 tools/testing/selftests/net/pmtu.sh                |  7 +-
 tools/testing/selftests/vm/map_fixed_noreplace.c   | 49 ++++++++++----
 80 files changed, 744 insertions(+), 399 deletions(-)

[PATCH 5.10 01/71] ARM: boot: dts: bcm2711: Fix HVS register range

[Greg Kroah-Hartman]

From: Maxime Ripard <maxime@cerno.tech>

[ Upstream commit 515415d316168c6521d74ea8280287e28d7303e6 ]

While the HVS has the same context memory size in the BCM2711 than in
the previous SoCs, the range allocated to the registers doubled and it
now takes 16k + 16k, compared to 8k + 16k before.

The KMS driver will use the whole context RAM though, eventually
resulting in a pointer dereference error when we access the higher half
of the context memory since it hasn't been mapped.

Fixes: 4564363351e2 ("ARM: dts: bcm2711: Enable the display pipeline")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm2711.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 55ec83bde5a6..e46a3f4ad350 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -290,6 +290,7 @@ pixelvalve4: pixelvalve@7e216000 {
 
 		hvs: hvs@7e400000 {
 			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-- 
2.34.1

[PATCH 5.10 02/71] clk: qcom: gdsc: Add support to update GDSC transition delay

[Greg Kroah-Hartman]

From: Taniya Das <tdas@codeaurora.org>

[ Upstream commit 4e7c4d3652f96f41179aab3ff53025c7a550d689 ]

GDSCs have multiple transition delays which are used for the GDSC FSM
states. Older targets/designs required these values to be updated from
gdsc code to certain default values for the FSM state to work as
expected. But on the newer targets/designs the values updated from the
GDSC driver can hamper the FSM state to not work as expected.

On SC7180 we observe black screens because the gdsc is being
enabled/disabled very rapidly and the GDSC FSM state does not work as
expected. This is due to the fact that the GDSC reset value is being
updated from SW.

Thus add support to update the transition delay from the clock
controller gdscs as required.

Fixes: 45dd0e55317cc ("clk: qcom: Add support for GDSCs)
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/20220223185606.3941-1-tdas@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/gdsc.c | 26 +++++++++++++++++++++-----
 drivers/clk/qcom/gdsc.h |  8 +++++++-
 2 files changed, 28 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index 4ece326ea233..cf23cfd7e467 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2015, 2017-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, 2017-2018, 2022, The Linux Foundation. All rights reserved.
  */
 
 #include <linux/bitops.h>
@@ -34,9 +34,14 @@
 #define CFG_GDSCR_OFFSET		0x4
 
 /* Wait 2^n CXO cycles between all states. Here, n=2 (4 cycles). */
-#define EN_REST_WAIT_VAL	(0x2 << 20)
-#define EN_FEW_WAIT_VAL		(0x8 << 16)
-#define CLK_DIS_WAIT_VAL	(0x2 << 12)
+#define EN_REST_WAIT_VAL	0x2
+#define EN_FEW_WAIT_VAL		0x8
+#define CLK_DIS_WAIT_VAL	0x2
+
+/* Transition delay shifts */
+#define EN_REST_WAIT_SHIFT	20
+#define EN_FEW_WAIT_SHIFT	16
+#define CLK_DIS_WAIT_SHIFT	12
 
 #define RETAIN_MEM		BIT(14)
 #define RETAIN_PERIPH		BIT(13)
@@ -341,7 +346,18 @@ static int gdsc_init(struct gdsc *sc)
 	 */
 	mask = HW_CONTROL_MASK | SW_OVERRIDE_MASK |
 	       EN_REST_WAIT_MASK | EN_FEW_WAIT_MASK | CLK_DIS_WAIT_MASK;
-	val = EN_REST_WAIT_VAL | EN_FEW_WAIT_VAL | CLK_DIS_WAIT_VAL;
+
+	if (!sc->en_rest_wait_val)
+		sc->en_rest_wait_val = EN_REST_WAIT_VAL;
+	if (!sc->en_few_wait_val)
+		sc->en_few_wait_val = EN_FEW_WAIT_VAL;
+	if (!sc->clk_dis_wait_val)
+		sc->clk_dis_wait_val = CLK_DIS_WAIT_VAL;
+
+	val = sc->en_rest_wait_val << EN_REST_WAIT_SHIFT |
+		sc->en_few_wait_val << EN_FEW_WAIT_SHIFT |
+		sc->clk_dis_wait_val << CLK_DIS_WAIT_SHIFT;
+
 	ret = regmap_update_bits(sc->regmap, sc->gdscr, mask, val);
 	if (ret)
 		return ret;
diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h
index 5bb396b344d1..762f1b5e1ec5 100644
--- a/drivers/clk/qcom/gdsc.h
+++ b/drivers/clk/qcom/gdsc.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (c) 2015, 2017-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, 2017-2018, 2022, The Linux Foundation. All rights reserved.
  */
 
 #ifndef __QCOM_GDSC_H__
@@ -22,6 +22,9 @@ struct reset_controller_dev;
  * @cxcs: offsets of branch registers to toggle mem/periph bits in
  * @cxc_count: number of @cxcs
  * @pwrsts: Possible powerdomain power states
+ * @en_rest_wait_val: transition delay value for receiving enr ack signal
+ * @en_few_wait_val: transition delay value for receiving enf ack signal
+ * @clk_dis_wait_val: transition delay value for halting clock
  * @resets: ids of resets associated with this gdsc
  * @reset_count: number of @resets
  * @rcdev: reset controller
@@ -35,6 +38,9 @@ struct gdsc {
 	unsigned int			clamp_io_ctrl;
 	unsigned int			*cxcs;
 	unsigned int			cxc_count;
+	unsigned int			en_rest_wait_val;
+	unsigned int			en_few_wait_val;
+	unsigned int			clk_dis_wait_val;
 	const u8			pwrsts;
 /* Powerdomain allowable state bitfields */
 #define PWRSTS_OFF		BIT(0)
-- 
2.34.1

[PATCH 5.10 03/71] HID: vivaldi: fix sysfs attributes leak

[Greg Kroah-Hartman]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit cc71d37fd1f11e0495b1cf580909ebea37eaa886 ]

The driver creates the top row map sysfs attribute in input_configured()
method; unfortunately we do not have a callback that is executed when HID
interface is unbound, thus we are leaking these sysfs attributes, for
example when device is disconnected.

To fix it let's switch to managed version of adding sysfs attributes which
will ensure that they are destroyed when the driver is unbound.

Fixes: 14c9c014babe ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-vivaldi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/hid-vivaldi.c b/drivers/hid/hid-vivaldi.c
index 576518e704ee..d57ec1767037 100644
--- a/drivers/hid/hid-vivaldi.c
+++ b/drivers/hid/hid-vivaldi.c
@@ -143,7 +143,7 @@ static void vivaldi_feature_mapping(struct hid_device *hdev,
 static int vivaldi_input_configured(struct hid_device *hdev,
 				    struct hid_input *hidinput)
 {
-	return sysfs_create_group(&hdev->dev.kobj, &input_attribute_group);
+	return devm_device_add_group(&hdev->dev, &input_attribute_group);
 }
 
 static const struct hid_device_id vivaldi_table[] = {
-- 
2.34.1

[PATCH 5.10 04/71] arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

[ Upstream commit a0e897d1b36793fe0ab899f2fe93dff25c82f418 ]

U-Boot uses ethernet* aliases for setting MAC addresses. Therefore define
also alias for ethernet0.

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 2e437f20da39..ad963b51dcbe 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -18,6 +18,7 @@ / {
 
 	aliases {
 		spi0 = &spi0;
+		ethernet0 = &eth0;
 		ethernet1 = &eth1;
 		mmc0 = &sdhci0;
 		mmc1 = &sdhci1;
-- 
2.34.1

[PATCH 5.10 05/71] tipc: fix kernel panic when enabling bearer

[Greg Kroah-Hartman]

From: Tung Nguyen <tung.q.nguyen@dektech.com.au>

[ Upstream commit be4977b847f5d5cedb64d50eaaf2218c3a55a3a3 ]

When enabling a bearer on a node, a kernel panic is observed:

[    4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc]
...
[    4.520030] Call Trace:
[    4.520689]  <IRQ>
[    4.521236]  tipc_link_build_proto_msg+0x375/0x750 [tipc]
[    4.522654]  tipc_link_build_state_msg+0x48/0xc0 [tipc]
[    4.524034]  __tipc_node_link_up+0xd7/0x290 [tipc]
[    4.525292]  tipc_rcv+0x5da/0x730 [tipc]
[    4.526346]  ? __netif_receive_skb_core+0xb7/0xfc0
[    4.527601]  tipc_l2_rcv_msg+0x5e/0x90 [tipc]
[    4.528737]  __netif_receive_skb_list_core+0x20b/0x260
[    4.530068]  netif_receive_skb_list_internal+0x1bf/0x2e0
[    4.531450]  ? dev_gro_receive+0x4c2/0x680
[    4.532512]  napi_complete_done+0x6f/0x180
[    4.533570]  virtnet_poll+0x29c/0x42e [virtio_net]
...

The node in question is receiving activate messages in another
thread after changing bearer status to allow message sending/
receiving in current thread:

         thread 1           |              thread 2
         --------           |              --------
                            |
tipc_enable_bearer()        |
  test_and_set_bit_lock()   |
    tipc_bearer_xmit_skb()  |
                            | tipc_l2_rcv_msg()
                            |   tipc_rcv()
                            |     __tipc_node_link_up()
                            |       tipc_link_build_state_msg()
                            |         tipc_link_build_proto_msg()
                            |           tipc_mon_prep()
                            |           {
                            |             ...
                            |             // null-pointer dereference
                            |             u16 gen = mon->dom_gen;
                            |             ...
                            |           }
  // Not being executed yet |
  tipc_mon_create()         |
  {                         |
    ...                     |
    // allocate             |
    mon = kzalloc();        |
    ...                     |
  }                         |

Monitoring pointer in thread 2 is dereferenced before monitoring data
is allocated in thread 1. This causes kernel panic.

This commit fixes it by allocating the monitoring data before enabling
the bearer to receive messages.

Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework")
Reported-by: Shuang Li <shuali@redhat.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/bearer.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 12e535b43d88..6911f1cab206 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -342,16 +342,18 @@ static int tipc_enable_bearer(struct net *net, const char *name,
 		goto rejected;
 	}
 
-	test_and_set_bit_lock(0, &b->up);
-	rcu_assign_pointer(tn->bearer_list[bearer_id], b);
-	if (skb)
-		tipc_bearer_xmit_skb(net, bearer_id, skb, &b->bcast_addr);
-
+	/* Create monitoring data before accepting activate messages */
 	if (tipc_mon_create(net, bearer_id)) {
 		bearer_disable(net, b);
+		kfree_skb(skb);
 		return -ENOMEM;
 	}
 
+	test_and_set_bit_lock(0, &b->up);
+	rcu_assign_pointer(tn->bearer_list[bearer_id], b);
+	if (skb)
+		tipc_bearer_xmit_skb(net, bearer_id, skb, &b->bcast_addr);
+
 	pr_info("Enabled bearer <%s>, priority %u\n", name, prio);
 
 	return res;
-- 
2.34.1

[PATCH 5.10 06/71] mISDN: Remove obsolete PIPELINE_DEBUG debugging information

[Greg Kroah-Hartman]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 2682ea324b000709dafec7e9210caa5189377c45 ]

As Leon Romanovsky's tips:
The definition of macro PIPELINE_DEBUG is commented more than 10 years ago
and can be seen as a dead code that should be removed.

Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/dsp_pipeline.c | 46 ++-----------------------------
 1 file changed, 2 insertions(+), 44 deletions(-)

diff --git a/drivers/isdn/mISDN/dsp_pipeline.c b/drivers/isdn/mISDN/dsp_pipeline.c
index 40588692cec7..e11ca6bbc7f4 100644
--- a/drivers/isdn/mISDN/dsp_pipeline.c
+++ b/drivers/isdn/mISDN/dsp_pipeline.c
@@ -17,9 +17,6 @@
 #include "dsp.h"
 #include "dsp_hwec.h"
 
-/* uncomment for debugging */
-/*#define PIPELINE_DEBUG*/
-
 struct dsp_pipeline_entry {
 	struct mISDN_dsp_element *elem;
 	void                *p;
@@ -104,10 +101,6 @@ int mISDN_dsp_element_register(struct mISDN_dsp_element *elem)
 		}
 	}
 
-#ifdef PIPELINE_DEBUG
-	printk(KERN_DEBUG "%s: %s registered\n", __func__, elem->name);
-#endif
-
 	return 0;
 
 err2:
@@ -129,10 +122,6 @@ void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem)
 	list_for_each_entry_safe(entry, n, &dsp_elements, list)
 		if (entry->elem == elem) {
 			device_unregister(&entry->dev);
-#ifdef PIPELINE_DEBUG
-			printk(KERN_DEBUG "%s: %s unregistered\n",
-			       __func__, elem->name);
-#endif
 			return;
 		}
 	printk(KERN_ERR "%s: element %s not in list.\n", __func__, elem->name);
@@ -145,10 +134,6 @@ int dsp_pipeline_module_init(void)
 	if (IS_ERR(elements_class))
 		return PTR_ERR(elements_class);
 
-#ifdef PIPELINE_DEBUG
-	printk(KERN_DEBUG "%s: dsp pipeline module initialized\n", __func__);
-#endif
-
 	dsp_hwec_init();
 
 	return 0;
@@ -168,10 +153,6 @@ void dsp_pipeline_module_exit(void)
 		       __func__, entry->elem->name);
 		kfree(entry);
 	}
-
-#ifdef PIPELINE_DEBUG
-	printk(KERN_DEBUG "%s: dsp pipeline module exited\n", __func__);
-#endif
 }
 
 int dsp_pipeline_init(struct dsp_pipeline *pipeline)
@@ -181,10 +162,6 @@ int dsp_pipeline_init(struct dsp_pipeline *pipeline)
 
 	INIT_LIST_HEAD(&pipeline->list);
 
-#ifdef PIPELINE_DEBUG
-	printk(KERN_DEBUG "%s: dsp pipeline ready\n", __func__);
-#endif
-
 	return 0;
 }
 
@@ -210,15 +187,11 @@ void dsp_pipeline_destroy(struct dsp_pipeline *pipeline)
 		return;
 
 	_dsp_pipeline_destroy(pipeline);
-
-#ifdef PIPELINE_DEBUG
-	printk(KERN_DEBUG "%s: dsp pipeline destroyed\n", __func__);
-#endif
 }
 
 int dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg)
 {
-	int incomplete = 0, found = 0;
+	int found = 0;
 	char *dup, *tok, *name, *args;
 	struct dsp_element_entry *entry, *n;
 	struct dsp_pipeline_entry *pipeline_entry;
@@ -251,7 +224,6 @@ int dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg)
 					printk(KERN_ERR "%s: failed to add "
 					       "entry to pipeline: %s (out of "
 					       "memory)\n", __func__, elem->name);
-					incomplete = 1;
 					goto _out;
 				}
 				pipeline_entry->elem = elem;
@@ -268,20 +240,12 @@ int dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg)
 					if (pipeline_entry->p) {
 						list_add_tail(&pipeline_entry->
 							      list, &pipeline->list);
-#ifdef PIPELINE_DEBUG
-						printk(KERN_DEBUG "%s: created "
-						       "instance of %s%s%s\n",
-						       __func__, name, args ?
-						       " with args " : "", args ?
-						       args : "");
-#endif
 					} else {
 						printk(KERN_ERR "%s: failed "
 						       "to add entry to pipeline: "
 						       "%s (new() returned NULL)\n",
 						       __func__, elem->name);
 						kfree(pipeline_entry);
-						incomplete = 1;
 					}
 				}
 				found = 1;
@@ -290,11 +254,9 @@ int dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg)
 
 		if (found)
 			found = 0;
-		else {
+		else
 			printk(KERN_ERR "%s: element not found, skipping: "
 			       "%s\n", __func__, name);
-			incomplete = 1;
-		}
 	}
 
 _out:
@@ -303,10 +265,6 @@ int dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg)
 	else
 		pipeline->inuse = 0;
 
-#ifdef PIPELINE_DEBUG
-	printk(KERN_DEBUG "%s: dsp pipeline built%s: %s\n",
-	       __func__, incomplete ? " incomplete" : "", cfg);
-#endif
 	kfree(dup);
 	return 0;
 }
-- 
2.34.1

[PATCH 5.10 07/71] mISDN: Fix memory leak in dsp_pipeline_build()

[Greg Kroah-Hartman]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit c6a502c2299941c8326d029cfc8a3bc8a4607ad5 ]

dsp_pipeline_build() allocates dup pointer by kstrdup(cfg),
but then it updates dup variable by strsep(&dup, "|").
As a result when it calls kfree(dup), the dup variable contains NULL.

Found by Linux Driver Verification project (linuxtesting.org) with SVACE.

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 960366cf8dbb ("Add mISDN DSP")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/dsp_pipeline.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/isdn/mISDN/dsp_pipeline.c b/drivers/isdn/mISDN/dsp_pipeline.c
index e11ca6bbc7f4..c3b2c99b5cd5 100644
--- a/drivers/isdn/mISDN/dsp_pipeline.c
+++ b/drivers/isdn/mISDN/dsp_pipeline.c
@@ -192,7 +192,7 @@ void dsp_pipeline_destroy(struct dsp_pipeline *pipeline)
 int dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg)
 {
 	int found = 0;
-	char *dup, *tok, *name, *args;
+	char *dup, *next, *tok, *name, *args;
 	struct dsp_element_entry *entry, *n;
 	struct dsp_pipeline_entry *pipeline_entry;
 	struct mISDN_dsp_element *elem;
@@ -203,10 +203,10 @@ int dsp_pipeline_build(struct dsp_pipeline *pipeline, const char *cfg)
 	if (!list_empty(&pipeline->list))
 		_dsp_pipeline_destroy(pipeline);
 
-	dup = kstrdup(cfg, GFP_ATOMIC);
+	dup = next = kstrdup(cfg, GFP_ATOMIC);
 	if (!dup)
 		return 0;
-	while ((tok = strsep(&dup, "|"))) {
+	while ((tok = strsep(&next, "|"))) {
 		if (!strlen(tok))
 			continue;
 		name = strsep(&tok, "(");
-- 
2.34.1

[PATCH 5.10 08/71] virtio-blk: Dont use MAX_DISCARD_SEGMENTS if max_discard_seg is zero

[Greg Kroah-Hartman]

From: Xie Yongji <xieyongji@bytedance.com>

[ Upstream commit dacc73ed0b88f1a787ec20385f42ca9dd9eddcd0 ]

Currently the value of max_discard_segment will be set to
MAX_DISCARD_SEGMENTS (256) with no basis in hardware if device
set 0 to max_discard_seg in configuration space. It's incorrect
since the device might not be able to handle such large descriptors.
To fix it, let's follow max_segments restrictions in this case.

Fixes: 1f23816b8eb8 ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20220304100058.116-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/virtio_blk.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 42acf9587ef3..a03390127741 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -869,9 +869,15 @@ static int virtblk_probe(struct virtio_device *vdev)
 
 		virtio_cread(vdev, struct virtio_blk_config, max_discard_seg,
 			     &v);
+
+		/*
+		 * max_discard_seg == 0 is out of spec but we always
+		 * handled it.
+		 */
+		if (!v)
+			v = sg_elems - 2;
 		blk_queue_max_discard_segments(q,
-					       min_not_zero(v,
-							    MAX_DISCARD_SEGMENTS));
+					       min(v, MAX_DISCARD_SEGMENTS));
 
 		blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
 	}
-- 
2.34.1

[PATCH 5.10 09/71] isdn: hfcpci: check the return value of dma_set_mask() in setup_hw()

[Greg Kroah-Hartman]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit d0aeb0d4a3f7d2a0df7e9545892bbeede8f2ac7e ]

The function dma_set_mask() in setup_hw() can fail, so its return value
should be checked.

Fixes: 1700fe1a10dc ("Add mISDN HFC PCI driver")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/hfcpci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index bd087cca1c1d..af17459c1a5c 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -2005,7 +2005,11 @@ setup_hw(struct hfc_pci *hc)
 	}
 	/* Allocate memory for FIFOS */
 	/* the memory needs to be on a 32k boundary within the first 4G */
-	dma_set_mask(&hc->pdev->dev, 0xFFFF8000);
+	if (dma_set_mask(&hc->pdev->dev, 0xFFFF8000)) {
+		printk(KERN_WARNING
+		       "HFC-PCI: No usable DMA configuration!\n");
+		return -EIO;
+	}
 	buffer = dma_alloc_coherent(&hc->pdev->dev, 0x8000, &hc->hw.dmahandle,
 				    GFP_KERNEL);
 	/* We silently assume the address is okay if nonzero */
-- 
2.34.1

[PATCH 5.10 10/71] net: qlogic: check the return value of dma_alloc_coherent() in qed_vf_hw_prepare()

[Greg Kroah-Hartman]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit e0058f0fa80f6e09c4d363779c241c45a3c56b94 ]

The function dma_alloc_coherent() in qed_vf_hw_prepare() can fail, so
its return value should be checked.

Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_vf.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c
index 72a38d53d33f..e2a5a6a373cb 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_vf.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c
@@ -513,6 +513,9 @@ int qed_vf_hw_prepare(struct qed_hwfn *p_hwfn)
 						    p_iov->bulletin.size,
 						    &p_iov->bulletin.phys,
 						    GFP_KERNEL);
+	if (!p_iov->bulletin.p_virt)
+		goto free_pf2vf_reply;
+
 	DP_VERBOSE(p_hwfn, QED_MSG_IOV,
 		   "VF's bulletin Board [%p virt 0x%llx phys 0x%08x bytes]\n",
 		   p_iov->bulletin.p_virt,
@@ -552,6 +555,10 @@ int qed_vf_hw_prepare(struct qed_hwfn *p_hwfn)
 
 	return rc;
 
+free_pf2vf_reply:
+	dma_free_coherent(&p_hwfn->cdev->pdev->dev,
+			  sizeof(union pfvf_tlvs),
+			  p_iov->pf2vf_reply, p_iov->pf2vf_reply_phys);
 free_vf2pf_request:
 	dma_free_coherent(&p_hwfn->cdev->pdev->dev,
 			  sizeof(union vfpf_tlvs),
-- 
2.34.1

[PATCH 5.10 11/71] esp: Fix BEET mode inter address family tunneling on GSO

[Greg Kroah-Hartman]

From: Steffen Klassert <steffen.klassert@secunet.com>

[ Upstream commit 053c8fdf2c930efdff5496960842bbb5c34ad43a ]

The xfrm{4,6}_beet_gso_segment() functions did not correctly set the
SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family
tunneling case. Fix this by setting these gso types.

Fixes: 384a46ea7bdc7 ("esp4: add gso_segment for esp4 beet mode")
Fixes: 7f9e40eb18a99 ("esp6: add gso_segment for esp6 beet mode")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/esp4_offload.c | 3 +++
 net/ipv6/esp6_offload.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/net/ipv4/esp4_offload.c b/net/ipv4/esp4_offload.c
index 5aa7344dbec7..3450c9ba2728 100644
--- a/net/ipv4/esp4_offload.c
+++ b/net/ipv4/esp4_offload.c
@@ -160,6 +160,9 @@ static struct sk_buff *xfrm4_beet_gso_segment(struct xfrm_state *x,
 			skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV4;
 	}
 
+	if (proto == IPPROTO_IPV6)
+		skb_shinfo(skb)->gso_type |= SKB_GSO_IPXIP4;
+
 	__skb_pull(skb, skb_transport_offset(skb));
 	ops = rcu_dereference(inet_offloads[proto]);
 	if (likely(ops && ops->callbacks.gso_segment))
diff --git a/net/ipv6/esp6_offload.c b/net/ipv6/esp6_offload.c
index 4af56affaafd..1c3f02d05d2b 100644
--- a/net/ipv6/esp6_offload.c
+++ b/net/ipv6/esp6_offload.c
@@ -198,6 +198,9 @@ static struct sk_buff *xfrm6_beet_gso_segment(struct xfrm_state *x,
 			ipv6_skip_exthdr(skb, 0, &proto, &frag);
 	}
 
+	if (proto == IPPROTO_IPIP)
+		skb_shinfo(skb)->gso_type |= SKB_GSO_IPXIP6;
+
 	__skb_pull(skb, skb_transport_offset(skb));
 	ops = rcu_dereference(inet6_offloads[proto]);
 	if (likely(ops && ops->callbacks.gso_segment))
-- 
2.34.1

[PATCH 5.10 12/71] qed: return status of qed_iov_get_link

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit d9dc0c84ad2d4cc911ba252c973d1bf18d5eb9cf ]

Clang static analysis reports this issue
qed_sriov.c:4727:19: warning: Assigned value is
  garbage or undefined
  ivi->max_tx_rate = tx_rate ? tx_rate : link.speed;
                   ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

link is only sometimes set by the call to qed_iov_get_link()
qed_iov_get_link fails without setting link or returning
status.  So change the decl to return status.

Fixes: 73390ac9d82b ("qed*: support ndo_get_vf_config")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_sriov.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index b8dc5c4591ef..ef0ad4cf82e6 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -3778,11 +3778,11 @@ bool qed_iov_mark_vf_flr(struct qed_hwfn *p_hwfn, u32 *p_disabled_vfs)
 	return found;
 }
 
-static void qed_iov_get_link(struct qed_hwfn *p_hwfn,
-			     u16 vfid,
-			     struct qed_mcp_link_params *p_params,
-			     struct qed_mcp_link_state *p_link,
-			     struct qed_mcp_link_capabilities *p_caps)
+static int qed_iov_get_link(struct qed_hwfn *p_hwfn,
+			    u16 vfid,
+			    struct qed_mcp_link_params *p_params,
+			    struct qed_mcp_link_state *p_link,
+			    struct qed_mcp_link_capabilities *p_caps)
 {
 	struct qed_vf_info *p_vf = qed_iov_get_vf_info(p_hwfn,
 						       vfid,
@@ -3790,7 +3790,7 @@ static void qed_iov_get_link(struct qed_hwfn *p_hwfn,
 	struct qed_bulletin_content *p_bulletin;
 
 	if (!p_vf)
-		return;
+		return -EINVAL;
 
 	p_bulletin = p_vf->bulletin.p_virt;
 
@@ -3800,6 +3800,7 @@ static void qed_iov_get_link(struct qed_hwfn *p_hwfn,
 		__qed_vf_get_link_state(p_hwfn, p_link, p_bulletin);
 	if (p_caps)
 		__qed_vf_get_link_caps(p_hwfn, p_caps, p_bulletin);
+	return 0;
 }
 
 static int
@@ -4658,6 +4659,7 @@ static int qed_get_vf_config(struct qed_dev *cdev,
 	struct qed_public_vf_info *vf_info;
 	struct qed_mcp_link_state link;
 	u32 tx_rate;
+	int ret;
 
 	/* Sanitize request */
 	if (IS_VF(cdev))
@@ -4671,7 +4673,9 @@ static int qed_get_vf_config(struct qed_dev *cdev,
 
 	vf_info = qed_iov_get_public_vf_info(hwfn, vf_id, true);
 
-	qed_iov_get_link(hwfn, vf_id, NULL, &link, NULL);
+	ret = qed_iov_get_link(hwfn, vf_id, NULL, &link, NULL);
+	if (ret)
+		return ret;
 
 	/* Fill information about VF */
 	ivi->vf = vf_id;
-- 
2.34.1

[PATCH 5.10 13/71] drm/sun4i: mixer: Fix P010 and P210 format numbers

[Greg Kroah-Hartman]

From: Jernej Skrabec <jernej.skrabec@gmail.com>

[ Upstream commit 9470c29faa91c804aa04de4c10634bf02462bfa5 ]

It turns out that DE3 manual has inverted YUV and YVU format numbers for
P010 and P210. Invert them.

This was tested by playing video decoded to P010 and additionally
confirmed by looking at BSP driver source.

Fixes: 169ca4b38932 ("drm/sun4i: Add separate DE3 VI layer formats")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228181436.1424550-1-jernej.skrabec@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun8i_mixer.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.h b/drivers/gpu/drm/sun4i/sun8i_mixer.h
index 7576b523fdbb..b0178c045267 100644
--- a/drivers/gpu/drm/sun4i/sun8i_mixer.h
+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.h
@@ -113,10 +113,10 @@
 /* format 13 is semi-planar YUV411 VUVU */
 #define SUN8I_MIXER_FBFMT_YUV411	14
 /* format 15 doesn't exist */
-/* format 16 is P010 YVU */
-#define SUN8I_MIXER_FBFMT_P010_YUV	17
-/* format 18 is P210 YVU */
-#define SUN8I_MIXER_FBFMT_P210_YUV	19
+#define SUN8I_MIXER_FBFMT_P010_YUV	16
+/* format 17 is P010 YVU */
+#define SUN8I_MIXER_FBFMT_P210_YUV	18
+/* format 19 is P210 YVU */
 /* format 20 is packed YVU444 10-bit */
 /* format 21 is packed YUV444 10-bit */
 
-- 
2.34.1

[PATCH 5.10 14/71] net: dsa: mt7530: fix incorrect test in mt753x_phylink_validate()

[Greg Kroah-Hartman]

From: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

[ Upstream commit e5417cbf7ab5df1632e68fe7d9e6331fc0e7dbd6 ]

Discussing one of the tests in mt753x_phylink_validate() with Landen
Chao confirms that the "||" should be "&&". Fix this.

Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 1f642fdbf214..5ee8809bc271 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2342,7 +2342,7 @@ mt753x_phylink_validate(struct dsa_switch *ds, int port,
 
 	phylink_set_port_modes(mask);
 
-	if (state->interface != PHY_INTERFACE_MODE_TRGMII ||
+	if (state->interface != PHY_INTERFACE_MODE_TRGMII &&
 	    !phy_interface_mode_is_8023z(state->interface)) {
 		phylink_set(mask, 10baseT_Half);
 		phylink_set(mask, 10baseT_Full);
-- 
2.34.1

[PATCH 5.10 15/71] ARM: dts: aspeed: Fix AST2600 quad spi group

[Greg Kroah-Hartman]

From: Joel Stanley <joel@jms.id.au>

[ Upstream commit 2f6edb6bcb2f3f41d876e0eba2ba97f87a0296ea ]

Requesting quad mode for the FMC resulted in an error:

  &fmc {
         status = "okay";
 +       pinctrl-names = "default";
 +       pinctrl-0 = <&pinctrl_fwqspi_default>'

[    0.742963] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table


This is because the quad mode pins are a group of pins, not a function.

After applying this patch we can request the pins and the QSPI data
lines are muxed:

 # cat /sys/kernel/debug/pinctrl/1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep 1e620000.spi
 pin 196 (AE12): device 1e620000.spi function FWSPID group FWQSPID
 pin 197 (AF12): device 1e620000.spi function FWSPID group FWQSPID
 pin 240 (Y1): device 1e620000.spi function FWSPID group FWQSPID
 pin 241 (Y2): device 1e620000.spi function FWSPID group FWQSPID
 pin 242 (Y3): device 1e620000.spi function FWSPID group FWQSPID
 pin 243 (Y4): device 1e620000.spi function FWSPID group FWQSPID

Fixes: f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 910eacc8ad3b..a362714ae9fc 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -118,7 +118,7 @@ pinctrl_fwspid_default: fwspid_default {
 	};
 
 	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
+		function = "FWSPID";
 		groups = "FWQSPID";
 	};
 
-- 
2.34.1

[PATCH 5.10 16/71] i40e: stop disabling VFs due to PF error responses

[Greg Kroah-Hartman]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 5710ab79166504013f7c0ae6a57e7d2fd26e5c43 ]

The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf)
function has logic to detect "failure" responses sent to the VF. If a VF
is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is
marked as disabled. In either case, a dev_info message is printed
stating that a VF opcode failed.

This logic originates from the early implementation of VF support in
commit 5c3c48ac6bf5 ("i40e: implement virtual device interface").

That commit did not go far enough. The "logic" for this behavior seems
to be that error responses somehow indicate a malicious VF. This is not
really true. The PF might be sending an error for any number of reasons
such as lacking resources, an unsupported operation, etc. This does not
indicate a malicious VF. We already have a separate robust malicious VF
detection which relies on hardware logic to detect and prevent a variety
of behaviors.

There is no justification for this behavior in the original
implementation. In fact, a later commit 18b7af57d9c1 ("i40e: Lower some
message levels") reduced the opcode failure message from a dev_err to a
dev_info. In addition, recent commit 01cbf50877e6 ("i40e: Fix to not
show opcode msg on unsuccessful VF MAC change") changed the logic to
allow quieting it for expected failures.

That commit prevented this logic from kicking in for specific
circumstances. This change did not go far enough. The behavior is not
documented nor is it part of any requirement for our products. Other
operating systems such as the FreeBSD implementation of our driver do
not include this logic.

It is clear this check does not make sense, and causes problems which
led to ugly workarounds.

Fix this by just removing the entire logic and the need for the
i40e_vc_send_msg_to_vf_ex function.

Fixes: 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change")
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/i40e/i40e_debugfs.c    |  6 +-
 .../ethernet/intel/i40e/i40e_virtchnl_pf.c    | 57 +++----------------
 .../ethernet/intel/i40e/i40e_virtchnl_pf.h    |  5 --
 3 files changed, 9 insertions(+), 59 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 1114a15a9ce3..989d5c7263d7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -742,10 +742,8 @@ static void i40e_dbg_dump_vf(struct i40e_pf *pf, int vf_id)
 		vsi = pf->vsi[vf->lan_vsi_idx];
 		dev_info(&pf->pdev->dev, "vf %2d: VSI id=%d, seid=%d, qps=%d\n",
 			 vf_id, vf->lan_vsi_id, vsi->seid, vf->num_queue_pairs);
-		dev_info(&pf->pdev->dev, "       num MDD=%lld, invalid msg=%lld, valid msg=%lld\n",
-			 vf->num_mdd_events,
-			 vf->num_invalid_msgs,
-			 vf->num_valid_msgs);
+		dev_info(&pf->pdev->dev, "       num MDD=%lld\n",
+			 vf->num_mdd_events);
 	} else {
 		dev_info(&pf->pdev->dev, "invalid VF id %d\n", vf_id);
 	}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index f71b7334e295..9181e007e039 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1864,19 +1864,17 @@ int i40e_pci_sriov_configure(struct pci_dev *pdev, int num_vfs)
 /***********************virtual channel routines******************/
 
 /**
- * i40e_vc_send_msg_to_vf_ex
+ * i40e_vc_send_msg_to_vf
  * @vf: pointer to the VF info
  * @v_opcode: virtual channel opcode
  * @v_retval: virtual channel return value
  * @msg: pointer to the msg buffer
  * @msglen: msg length
- * @is_quiet: true for not printing unsuccessful return values, false otherwise
  *
  * send msg to VF
  **/
-static int i40e_vc_send_msg_to_vf_ex(struct i40e_vf *vf, u32 v_opcode,
-				     u32 v_retval, u8 *msg, u16 msglen,
-				     bool is_quiet)
+static int i40e_vc_send_msg_to_vf(struct i40e_vf *vf, u32 v_opcode,
+				  u32 v_retval, u8 *msg, u16 msglen)
 {
 	struct i40e_pf *pf;
 	struct i40e_hw *hw;
@@ -1891,25 +1889,6 @@ static int i40e_vc_send_msg_to_vf_ex(struct i40e_vf *vf, u32 v_opcode,
 	hw = &pf->hw;
 	abs_vf_id = vf->vf_id + hw->func_caps.vf_base_id;
 
-	/* single place to detect unsuccessful return values */
-	if (v_retval && !is_quiet) {
-		vf->num_invalid_msgs++;
-		dev_info(&pf->pdev->dev, "VF %d failed opcode %d, retval: %d\n",
-			 vf->vf_id, v_opcode, v_retval);
-		if (vf->num_invalid_msgs >
-		    I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED) {
-			dev_err(&pf->pdev->dev,
-				"Number of invalid messages exceeded for VF %d\n",
-				vf->vf_id);
-			dev_err(&pf->pdev->dev, "Use PF Control I/F to enable the VF\n");
-			set_bit(I40E_VF_STATE_DISABLED, &vf->vf_states);
-		}
-	} else {
-		vf->num_valid_msgs++;
-		/* reset the invalid counter, if a valid message is received. */
-		vf->num_invalid_msgs = 0;
-	}
-
 	aq_ret = i40e_aq_send_msg_to_vf(hw, abs_vf_id,	v_opcode, v_retval,
 					msg, msglen, NULL);
 	if (aq_ret) {
@@ -1922,23 +1901,6 @@ static int i40e_vc_send_msg_to_vf_ex(struct i40e_vf *vf, u32 v_opcode,
 	return 0;
 }
 
-/**
- * i40e_vc_send_msg_to_vf
- * @vf: pointer to the VF info
- * @v_opcode: virtual channel opcode
- * @v_retval: virtual channel return value
- * @msg: pointer to the msg buffer
- * @msglen: msg length
- *
- * send msg to VF
- **/
-static int i40e_vc_send_msg_to_vf(struct i40e_vf *vf, u32 v_opcode,
-				  u32 v_retval, u8 *msg, u16 msglen)
-{
-	return i40e_vc_send_msg_to_vf_ex(vf, v_opcode, v_retval,
-					 msg, msglen, false);
-}
-
 /**
  * i40e_vc_send_resp_to_vf
  * @vf: pointer to the VF info
@@ -2759,7 +2721,6 @@ static int i40e_vc_get_stats_msg(struct i40e_vf *vf, u8 *msg)
  * i40e_check_vf_permission
  * @vf: pointer to the VF info
  * @al: MAC address list from virtchnl
- * @is_quiet: set true for printing msg without opcode info, false otherwise
  *
  * Check that the given list of MAC addresses is allowed. Will return -EPERM
  * if any address in the list is not valid. Checks the following conditions:
@@ -2774,15 +2735,13 @@ static int i40e_vc_get_stats_msg(struct i40e_vf *vf, u8 *msg)
  * addresses might not be accurate.
  **/
 static inline int i40e_check_vf_permission(struct i40e_vf *vf,
-					   struct virtchnl_ether_addr_list *al,
-					   bool *is_quiet)
+					   struct virtchnl_ether_addr_list *al)
 {
 	struct i40e_pf *pf = vf->pf;
 	struct i40e_vsi *vsi = pf->vsi[vf->lan_vsi_idx];
 	int mac2add_cnt = 0;
 	int i;
 
-	*is_quiet = false;
 	for (i = 0; i < al->num_elements; i++) {
 		struct i40e_mac_filter *f;
 		u8 *addr = al->list[i].addr;
@@ -2806,7 +2765,6 @@ static inline int i40e_check_vf_permission(struct i40e_vf *vf,
 		    !ether_addr_equal(addr, vf->default_lan_addr.addr)) {
 			dev_err(&pf->pdev->dev,
 				"VF attempting to override administratively set MAC address, bring down and up the VF interface to resume normal operation\n");
-			*is_quiet = true;
 			return -EPERM;
 		}
 
@@ -2843,7 +2801,6 @@ static int i40e_vc_add_mac_addr_msg(struct i40e_vf *vf, u8 *msg)
 	    (struct virtchnl_ether_addr_list *)msg;
 	struct i40e_pf *pf = vf->pf;
 	struct i40e_vsi *vsi = NULL;
-	bool is_quiet = false;
 	i40e_status ret = 0;
 	int i;
 
@@ -2860,7 +2817,7 @@ static int i40e_vc_add_mac_addr_msg(struct i40e_vf *vf, u8 *msg)
 	 */
 	spin_lock_bh(&vsi->mac_filter_hash_lock);
 
-	ret = i40e_check_vf_permission(vf, al, &is_quiet);
+	ret = i40e_check_vf_permission(vf, al);
 	if (ret) {
 		spin_unlock_bh(&vsi->mac_filter_hash_lock);
 		goto error_param;
@@ -2898,8 +2855,8 @@ static int i40e_vc_add_mac_addr_msg(struct i40e_vf *vf, u8 *msg)
 
 error_param:
 	/* send the response to the VF */
-	return i40e_vc_send_msg_to_vf_ex(vf, VIRTCHNL_OP_ADD_ETH_ADDR,
-				       ret, NULL, 0, is_quiet);
+	return i40e_vc_send_msg_to_vf(vf, VIRTCHNL_OP_ADD_ETH_ADDR,
+				      ret, NULL, 0);
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
index 03c42fd0fea1..a554d0a0b09b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h
@@ -10,8 +10,6 @@
 
 #define I40E_VIRTCHNL_SUPPORTED_QTYPES 2
 
-#define I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED	10
-
 #define I40E_VLAN_PRIORITY_SHIFT	13
 #define I40E_VLAN_MASK			0xFFF
 #define I40E_PRIORITY_MASK		0xE000
@@ -92,9 +90,6 @@ struct i40e_vf {
 	u8 num_queue_pairs;	/* num of qps assigned to VF vsis */
 	u8 num_req_queues;	/* num of requested qps */
 	u64 num_mdd_events;	/* num of mdd events detected */
-	/* num of continuous malformed or invalid msgs detected */
-	u64 num_invalid_msgs;
-	u64 num_valid_msgs;	/* num of valid msgs detected */
 
 	unsigned long vf_caps;	/* vf's adv. capabilities */
 	unsigned long vf_states;	/* vf's runtime states */
-- 
2.34.1

[PATCH 5.10 17/71] ice: stop disabling VFs due to PF error responses

[Greg Kroah-Hartman]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 79498d5af8e458102242d1667cf44df1f1564e63 ]

The ice_vc_send_msg_to_vf function has logic to detect "failure"
responses being sent to a VF. If a VF is sent more than
ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled.
Almost identical logic also existed in the i40e driver.

This logic was added to the ice driver in commit 1071a8358a28 ("ice:
Implement virtchnl commands for AVF support") which itself copied from
the i40e implementation in commit 5c3c48ac6bf5 ("i40e: implement virtual
device interface").

Neither commit provides a proper explanation or justification of the
check. In fact, later commits to i40e changed the logic to allow
bypassing the check in some specific instances.

The "logic" for this seems to be that error responses somehow indicate a
malicious VF. This is not really true. The PF might be sending an error
for any number of reasons such as lack of resources, etc.

Additionally, this causes the PF to log an info message for every failed
VF response which may confuse users, and can spam the kernel log.

This behavior is not documented as part of any requirement for our
products and other operating system drivers such as the FreeBSD
implementation of our drivers do not include this type of check.

In fact, the change from dev_err to dev_info in i40e commit 18b7af57d9c1
("i40e: Lower some message levels") explains that these messages
typically don't actually indicate a real issue. It is quite likely that
a user who hits this in practice will be very confused as the VF will be
disabled without an obvious way to recover.

We already have robust malicious driver detection logic using actual
hardware detection mechanisms that detect and prevent invalid device
usage. Remove the logic since its not a documented requirement and the
behavior is not intuitive.

Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/ice/ice_virtchnl_pf.c   | 18 ------------------
 .../net/ethernet/intel/ice/ice_virtchnl_pf.h   |  3 ---
 2 files changed, 21 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 48511ad0e0c8..5134342ff70f 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -1849,24 +1849,6 @@ ice_vc_send_msg_to_vf(struct ice_vf *vf, u32 v_opcode,
 
 	dev = ice_pf_to_dev(pf);
 
-	/* single place to detect unsuccessful return values */
-	if (v_retval) {
-		vf->num_inval_msgs++;
-		dev_info(dev, "VF %d failed opcode %d, retval: %d\n", vf->vf_id,
-			 v_opcode, v_retval);
-		if (vf->num_inval_msgs > ICE_DFLT_NUM_INVAL_MSGS_ALLOWED) {
-			dev_err(dev, "Number of invalid messages exceeded for VF %d\n",
-				vf->vf_id);
-			dev_err(dev, "Use PF Control I/F to enable the VF\n");
-			set_bit(ICE_VF_STATE_DIS, vf->vf_states);
-			return -EIO;
-		}
-	} else {
-		vf->num_valid_msgs++;
-		/* reset the invalid counter, if a valid message is received. */
-		vf->num_inval_msgs = 0;
-	}
-
 	aq_ret = ice_aq_send_msg_to_vf(&pf->hw, vf->vf_id, v_opcode, v_retval,
 				       msg, msglen, NULL);
 	if (aq_ret && pf->hw.mailboxq.sq_last_status != ICE_AQ_RC_ENOSYS) {
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
index 59e5b4f16e96..d2e935c678a1 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
@@ -13,7 +13,6 @@
 #define ICE_MAX_MACADDR_PER_VF		18
 
 /* Malicious Driver Detection */
-#define ICE_DFLT_NUM_INVAL_MSGS_ALLOWED		10
 #define ICE_MDD_EVENTS_THRESHOLD		30
 
 /* Static VF transaction/status register def */
@@ -97,8 +96,6 @@ struct ice_vf {
 	unsigned int tx_rate;		/* Tx bandwidth limit in Mbps */
 	DECLARE_BITMAP(vf_states, ICE_VF_STATES_NBITS);	/* VF runtime states */
 
-	u64 num_inval_msgs;		/* number of continuous invalid msgs */
-	u64 num_valid_msgs;		/* number of valid msgs detected */
 	unsigned long vf_caps;		/* VF's adv. capabilities */
 	u8 num_req_qs;			/* num of queue pairs requested by VF */
 	u16 num_mac;
-- 
2.34.1

[PATCH 5.10 18/71] ice: Align macro names to the specification

[Greg Kroah-Hartman]

From: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>

[ Upstream commit d6730a871e68f10c786cdee59aebd6f92d49d249 ]

For get PHY abilities AQ, the specification defines "report modes"
as "with media", "without media" and "active configuration". For
clarity, rename macros to align with the specification.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_adminq_cmd.h | 10 +++++-----
 drivers/net/ethernet/intel/ice/ice_common.c     | 13 +++++++------
 drivers/net/ethernet/intel/ice/ice_ethtool.c    | 12 ++++++------
 drivers/net/ethernet/intel/ice/ice_main.c       | 12 ++++++------
 4 files changed, 24 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
index b06fbe99d8e9..b6dd8f81d699 100644
--- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
@@ -870,11 +870,11 @@ struct ice_aqc_get_phy_caps {
 	 * 01b - Report topology capabilities
 	 * 10b - Report SW configured
 	 */
-#define ICE_AQC_REPORT_MODE_S		1
-#define ICE_AQC_REPORT_MODE_M		(3 << ICE_AQC_REPORT_MODE_S)
-#define ICE_AQC_REPORT_NVM_CAP		0
-#define ICE_AQC_REPORT_TOPO_CAP		BIT(1)
-#define ICE_AQC_REPORT_SW_CFG		BIT(2)
+#define ICE_AQC_REPORT_MODE_S			1
+#define ICE_AQC_REPORT_MODE_M			(3 << ICE_AQC_REPORT_MODE_S)
+#define ICE_AQC_REPORT_TOPO_CAP_NO_MEDIA	0
+#define ICE_AQC_REPORT_TOPO_CAP_MEDIA		BIT(1)
+#define ICE_AQC_REPORT_ACTIVE_CFG		BIT(2)
 	__le32 reserved1;
 	__le32 addr_high;
 	__le32 addr_low;
diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 2b0d0373ab2c..ecdc467c4f6f 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -193,7 +193,7 @@ ice_aq_get_phy_caps(struct ice_port_info *pi, bool qual_mods, u8 report_mode,
 	ice_debug(hw, ICE_DBG_LINK, "   module_type[2] = 0x%x\n",
 		  pcaps->module_type[2]);
 
-	if (!status && report_mode == ICE_AQC_REPORT_TOPO_CAP) {
+	if (!status && report_mode == ICE_AQC_REPORT_TOPO_CAP_MEDIA) {
 		pi->phy.phy_type_low = le64_to_cpu(pcaps->phy_type_low);
 		pi->phy.phy_type_high = le64_to_cpu(pcaps->phy_type_high);
 		memcpy(pi->phy.link_info.module_type, &pcaps->module_type,
@@ -924,7 +924,8 @@ enum ice_status ice_init_hw(struct ice_hw *hw)
 
 	/* Initialize port_info struct with PHY capabilities */
 	status = ice_aq_get_phy_caps(hw->port_info, false,
-				     ICE_AQC_REPORT_TOPO_CAP, pcaps, NULL);
+				     ICE_AQC_REPORT_TOPO_CAP_MEDIA, pcaps,
+				     NULL);
 	devm_kfree(ice_hw_to_dev(hw), pcaps);
 	if (status)
 		goto err_unroll_sched;
@@ -2682,7 +2683,7 @@ enum ice_status ice_update_link_info(struct ice_port_info *pi)
 		if (!pcaps)
 			return ICE_ERR_NO_MEMORY;
 
-		status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP,
+		status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP_MEDIA,
 					     pcaps, NULL);
 
 		devm_kfree(ice_hw_to_dev(hw), pcaps);
@@ -2842,8 +2843,8 @@ ice_set_fc(struct ice_port_info *pi, u8 *aq_failures, bool ena_auto_link_update)
 		return ICE_ERR_NO_MEMORY;
 
 	/* Get the current PHY config */
-	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG, pcaps,
-				     NULL);
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_ACTIVE_CFG,
+				     pcaps, NULL);
 	if (status) {
 		*aq_failures = ICE_SET_FC_AQ_FAIL_GET;
 		goto out;
@@ -2989,7 +2990,7 @@ ice_cfg_phy_fec(struct ice_port_info *pi, struct ice_aqc_set_phy_cfg_data *cfg,
 	if (!pcaps)
 		return ICE_ERR_NO_MEMORY;
 
-	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP, pcaps,
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP_MEDIA, pcaps,
 				     NULL);
 	if (status)
 		goto out;
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 14eba9bc174d..be02f8f4d854 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -1081,7 +1081,7 @@ ice_get_fecparam(struct net_device *netdev, struct ethtool_fecparam *fecparam)
 	if (!caps)
 		return -ENOMEM;
 
-	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP,
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP_MEDIA,
 				     caps, NULL);
 	if (status) {
 		err = -EAGAIN;
@@ -1976,7 +1976,7 @@ ice_get_link_ksettings(struct net_device *netdev,
 		return -ENOMEM;
 
 	status = ice_aq_get_phy_caps(vsi->port_info, false,
-				     ICE_AQC_REPORT_SW_CFG, caps, NULL);
+				     ICE_AQC_REPORT_ACTIVE_CFG, caps, NULL);
 	if (status) {
 		err = -EIO;
 		goto done;
@@ -2013,7 +2013,7 @@ ice_get_link_ksettings(struct net_device *netdev,
 		ethtool_link_ksettings_add_link_mode(ks, advertising, FEC_RS);
 
 	status = ice_aq_get_phy_caps(vsi->port_info, false,
-				     ICE_AQC_REPORT_TOPO_CAP, caps, NULL);
+				     ICE_AQC_REPORT_TOPO_CAP_MEDIA, caps, NULL);
 	if (status) {
 		err = -EIO;
 		goto done;
@@ -2225,7 +2225,7 @@ ice_set_link_ksettings(struct net_device *netdev,
 		return -ENOMEM;
 
 	/* Get the PHY capabilities based on media */
-	status = ice_aq_get_phy_caps(p, false, ICE_AQC_REPORT_TOPO_CAP,
+	status = ice_aq_get_phy_caps(p, false, ICE_AQC_REPORT_TOPO_CAP_MEDIA,
 				     abilities, NULL);
 	if (status) {
 		err = -EAGAIN;
@@ -2954,7 +2954,7 @@ ice_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
 		return;
 
 	/* Get current PHY config */
-	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG, pcaps,
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_ACTIVE_CFG, pcaps,
 				     NULL);
 	if (status)
 		goto out;
@@ -3021,7 +3021,7 @@ ice_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
 		return -ENOMEM;
 
 	/* Get current PHY config */
-	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG, pcaps,
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_ACTIVE_CFG, pcaps,
 				     NULL);
 	if (status) {
 		kfree(pcaps);
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 6c75df216fa7..20c9d55f3adc 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -726,7 +726,7 @@ void ice_print_link_msg(struct ice_vsi *vsi, bool isup)
 	}
 
 	status = ice_aq_get_phy_caps(vsi->port_info, false,
-				     ICE_AQC_REPORT_SW_CFG, caps, NULL);
+				     ICE_AQC_REPORT_ACTIVE_CFG, caps, NULL);
 	if (status)
 		netdev_info(vsi->netdev, "Get phy capability failed.\n");
 
@@ -1645,7 +1645,7 @@ static int ice_force_phys_link_state(struct ice_vsi *vsi, bool link_up)
 	if (!pcaps)
 		return -ENOMEM;
 
-	retcode = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG, pcaps,
+	retcode = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_ACTIVE_CFG, pcaps,
 				      NULL);
 	if (retcode) {
 		dev_err(dev, "Failed to get phy capabilities, VSI %d error %d\n",
@@ -1705,7 +1705,7 @@ static int ice_init_nvm_phy_type(struct ice_port_info *pi)
 	if (!pcaps)
 		return -ENOMEM;
 
-	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_NVM_CAP, pcaps,
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP_NO_MEDIA, pcaps,
 				     NULL);
 
 	if (status) {
@@ -1821,7 +1821,7 @@ static int ice_init_phy_user_cfg(struct ice_port_info *pi)
 	if (!pcaps)
 		return -ENOMEM;
 
-	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP, pcaps,
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP_MEDIA, pcaps,
 				     NULL);
 	if (status) {
 		dev_err(ice_pf_to_dev(pf), "Get PHY capability failed.\n");
@@ -1900,7 +1900,7 @@ static int ice_configure_phy(struct ice_vsi *vsi)
 		return -ENOMEM;
 
 	/* Get current PHY config */
-	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_SW_CFG, pcaps,
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_ACTIVE_CFG, pcaps,
 				     NULL);
 	if (status) {
 		dev_err(dev, "Failed to get PHY configuration, VSI %d error %s\n",
@@ -1918,7 +1918,7 @@ static int ice_configure_phy(struct ice_vsi *vsi)
 
 	/* Use PHY topology as baseline for configuration */
 	memset(pcaps, 0, sizeof(*pcaps));
-	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP, pcaps,
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP_MEDIA, pcaps,
 				     NULL);
 	if (status) {
 		dev_err(dev, "Failed to get PHY topology, VSI %d error %s\n",
-- 
2.34.1

[PATCH 5.10 19/71] ice: Remove unnecessary checker loop

[Greg Kroah-Hartman]

From: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>

[ Upstream commit fd3dc1655eda6173566d56eaeb54f27ab4c9e33c ]

The loop checking for PF VSI doesn't make any sense. The VSI type
backing the netdev passed to ice_set_link_ksettings will always be
of type ICE_PF_VSI. Remove it.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index be02f8f4d854..300fd5d0ff32 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2189,8 +2189,8 @@ ice_set_link_ksettings(struct net_device *netdev,
 	struct ethtool_link_ksettings safe_ks, copy_ks;
 	struct ice_aqc_get_phy_caps_data *abilities;
 	u8 autoneg, timeout = TEST_SET_BITS_TIMEOUT;
-	u16 adv_link_speed, curr_link_speed, idx;
 	struct ice_aqc_set_phy_cfg_data config;
+	u16 adv_link_speed, curr_link_speed;
 	struct ice_pf *pf = np->vsi->back;
 	struct ice_port_info *p;
 	u8 autoneg_changed = 0;
@@ -2205,14 +2205,6 @@ ice_set_link_ksettings(struct net_device *netdev,
 	if (!p)
 		return -EOPNOTSUPP;
 
-	/* Check if this is LAN VSI */
-	ice_for_each_vsi(pf, idx)
-		if (pf->vsi[idx]->type == ICE_VSI_PF) {
-			if (np->vsi != pf->vsi[idx])
-				return -EOPNOTSUPP;
-			break;
-		}
-
 	if (p->phy.media_type != ICE_MEDIA_BASET &&
 	    p->phy.media_type != ICE_MEDIA_FIBER &&
 	    p->phy.media_type != ICE_MEDIA_BACKPLANE &&
-- 
2.34.1

[PATCH 5.10 20/71] ice: Rename a couple of variables

[Greg Kroah-Hartman]

From: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>

[ Upstream commit 0be39bb4c7c8c358f7baf10296db2426f7cf814c ]

In ice_set_link_ksettings, change 'abilities' to 'phy_caps' and 'p' to
'pi'. This is more consistent with similar usages elsewhere in the
driver.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 50 ++++++++++----------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 300fd5d0ff32..0582fca5e07f 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2187,12 +2187,12 @@ ice_set_link_ksettings(struct net_device *netdev,
 {
 	struct ice_netdev_priv *np = netdev_priv(netdev);
 	struct ethtool_link_ksettings safe_ks, copy_ks;
-	struct ice_aqc_get_phy_caps_data *abilities;
 	u8 autoneg, timeout = TEST_SET_BITS_TIMEOUT;
+	struct ice_aqc_get_phy_caps_data *phy_caps;
 	struct ice_aqc_set_phy_cfg_data config;
 	u16 adv_link_speed, curr_link_speed;
 	struct ice_pf *pf = np->vsi->back;
-	struct ice_port_info *p;
+	struct ice_port_info *pi;
 	u8 autoneg_changed = 0;
 	enum ice_status status;
 	u64 phy_type_high = 0;
@@ -2200,25 +2200,25 @@ ice_set_link_ksettings(struct net_device *netdev,
 	int err = 0;
 	bool linkup;
 
-	p = np->vsi->port_info;
+	pi = np->vsi->port_info;
 
-	if (!p)
+	if (!pi)
 		return -EOPNOTSUPP;
 
-	if (p->phy.media_type != ICE_MEDIA_BASET &&
-	    p->phy.media_type != ICE_MEDIA_FIBER &&
-	    p->phy.media_type != ICE_MEDIA_BACKPLANE &&
-	    p->phy.media_type != ICE_MEDIA_DA &&
-	    p->phy.link_info.link_info & ICE_AQ_LINK_UP)
+	if (pi->phy.media_type != ICE_MEDIA_BASET &&
+	    pi->phy.media_type != ICE_MEDIA_FIBER &&
+	    pi->phy.media_type != ICE_MEDIA_BACKPLANE &&
+	    pi->phy.media_type != ICE_MEDIA_DA &&
+	    pi->phy.link_info.link_info & ICE_AQ_LINK_UP)
 		return -EOPNOTSUPP;
 
-	abilities = kzalloc(sizeof(*abilities), GFP_KERNEL);
-	if (!abilities)
+	phy_caps = kzalloc(sizeof(*phy_caps), GFP_KERNEL);
+	if (!phy_caps)
 		return -ENOMEM;
 
 	/* Get the PHY capabilities based on media */
-	status = ice_aq_get_phy_caps(p, false, ICE_AQC_REPORT_TOPO_CAP_MEDIA,
-				     abilities, NULL);
+	status = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP_MEDIA,
+				     phy_caps, NULL);
 	if (status) {
 		err = -EAGAIN;
 		goto done;
@@ -2280,26 +2280,26 @@ ice_set_link_ksettings(struct net_device *netdev,
 	 * configuration is initialized during probe from PHY capabilities
 	 * software mode, and updated on set PHY configuration.
 	 */
-	memcpy(&config, &p->phy.curr_user_phy_cfg, sizeof(config));
+	memcpy(&config, &pi->phy.curr_user_phy_cfg, sizeof(config));
 
 	config.caps |= ICE_AQ_PHY_ENA_AUTO_LINK_UPDT;
 
 	/* Check autoneg */
-	err = ice_setup_autoneg(p, &safe_ks, &config, autoneg, &autoneg_changed,
+	err = ice_setup_autoneg(pi, &safe_ks, &config, autoneg, &autoneg_changed,
 				netdev);
 
 	if (err)
 		goto done;
 
 	/* Call to get the current link speed */
-	p->phy.get_link_info = true;
-	status = ice_get_link_status(p, &linkup);
+	pi->phy.get_link_info = true;
+	status = ice_get_link_status(pi, &linkup);
 	if (status) {
 		err = -EAGAIN;
 		goto done;
 	}
 
-	curr_link_speed = p->phy.link_info.link_speed;
+	curr_link_speed = pi->phy.link_info.link_speed;
 	adv_link_speed = ice_ksettings_find_adv_link_speed(ks);
 
 	/* If speed didn't get set, set it to what it currently is.
@@ -2318,7 +2318,7 @@ ice_set_link_ksettings(struct net_device *netdev,
 	}
 
 	/* save the requested speeds */
-	p->phy.link_info.req_speeds = adv_link_speed;
+	pi->phy.link_info.req_speeds = adv_link_speed;
 
 	/* set link and auto negotiation so changes take effect */
 	config.caps |= ICE_AQ_PHY_ENA_LINK;
@@ -2334,9 +2334,9 @@ ice_set_link_ksettings(struct net_device *netdev,
 	 * for set PHY configuration
 	 */
 	config.phy_type_high = cpu_to_le64(phy_type_high) &
-			abilities->phy_type_high;
+			phy_caps->phy_type_high;
 	config.phy_type_low = cpu_to_le64(phy_type_low) &
-			abilities->phy_type_low;
+			phy_caps->phy_type_low;
 
 	if (!(config.phy_type_high || config.phy_type_low)) {
 		/* If there is no intersection and lenient mode is enabled, then
@@ -2356,7 +2356,7 @@ ice_set_link_ksettings(struct net_device *netdev,
 	}
 
 	/* If link is up put link down */
-	if (p->phy.link_info.link_info & ICE_AQ_LINK_UP) {
+	if (pi->phy.link_info.link_info & ICE_AQ_LINK_UP) {
 		/* Tell the OS link is going down, the link will go
 		 * back up when fw says it is ready asynchronously
 		 */
@@ -2366,7 +2366,7 @@ ice_set_link_ksettings(struct net_device *netdev,
 	}
 
 	/* make the aq call */
-	status = ice_aq_set_phy_cfg(&pf->hw, p, &config, NULL);
+	status = ice_aq_set_phy_cfg(&pf->hw, pi, &config, NULL);
 	if (status) {
 		netdev_info(netdev, "Set phy config failed,\n");
 		err = -EAGAIN;
@@ -2374,9 +2374,9 @@ ice_set_link_ksettings(struct net_device *netdev,
 	}
 
 	/* Save speed request */
-	p->phy.curr_user_speed_req = adv_link_speed;
+	pi->phy.curr_user_speed_req = adv_link_speed;
 done:
-	kfree(abilities);
+	kfree(phy_caps);
 	clear_bit(__ICE_CFG_BUSY, pf->state);
 
 	return err;
-- 
2.34.1

[PATCH 5.10 21/71] ice: Fix curr_link_speed advertised speed

[Greg Kroah-Hartman]

From: Jedrzej Jagielski <jedrzej.jagielski@intel.com>

[ Upstream commit ad35ffa252af67d4cc7c744b9377a2b577748e3f ]

Change curr_link_speed advertised speed, due to
link_info.link_speed is not equal phy.curr_user_speed_req.
Without this patch it is impossible to set advertised
speed to same as link_speed.

Testing Hints: Try to set advertised speed
to 25G only with 25G default link (use ethtool -s 0x80000000)

Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 0582fca5e07f..421fc707f80a 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2299,7 +2299,7 @@ ice_set_link_ksettings(struct net_device *netdev,
 		goto done;
 	}
 
-	curr_link_speed = pi->phy.link_info.link_speed;
+	curr_link_speed = pi->phy.curr_user_speed_req;
 	adv_link_speed = ice_ksettings_find_adv_link_speed(ks);
 
 	/* If speed didn't get set, set it to what it currently is.
-- 
2.34.1

[PATCH 5.10 22/71] ethernet: Fix error handling in xemaclite_of_probe

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit b19ab4b38b06aae12442b2de95ccf58b5dc53584 ]

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid the
refcount leak. As the remove function do.

Fixes: 5cdaaa12866e ("net: emaclite: adding MDIO and phy lib support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 962831cdde4d..4bd44fbc6ecf 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -1187,7 +1187,7 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
 	if (rc) {
 		dev_err(dev,
 			"Cannot register network device, aborting\n");
-		goto error;
+		goto put_node;
 	}
 
 	dev_info(dev,
@@ -1195,6 +1195,8 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
 		 (unsigned int __force)ndev->mem_start, lp->base_addr, ndev->irq);
 	return 0;
 
+put_node:
+	of_node_put(lp->phy_node);
 error:
 	free_netdev(ndev);
 	return rc;
-- 
2.34.1

[PATCH 5.10 23/71] tipc: fix incorrect order of state message data sanity check

[Greg Kroah-Hartman]

From: Tung Nguyen <tung.q.nguyen@dektech.com.au>

[ Upstream commit c79fcc27be90b308b3fa90811aefafdd4078668c ]

When receiving a state message, function tipc_link_validate_msg()
is called to validate its header portion. Then, its data portion
is validated before it can be accessed correctly. However, current
data sanity  check is done after the message header is accessed to
update some link variables.

This commit fixes this issue by moving the data sanity check to
the beginning of state message handling and right after the header
sanity check.

Fixes: 9aa422ad3266 ("tipc: improve size validations for received domain records")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/link.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/tipc/link.c b/net/tipc/link.c
index fb835a3822f4..7a353ff62844 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -2245,6 +2245,11 @@ static int tipc_link_proto_rcv(struct tipc_link *l, struct sk_buff *skb,
 		break;
 
 	case STATE_MSG:
+		/* Validate Gap ACK blocks, drop if invalid */
+		glen = tipc_get_gap_ack_blks(&ga, l, hdr, true);
+		if (glen > dlen)
+			break;
+
 		l->rcv_nxt_state = msg_seqno(hdr) + 1;
 
 		/* Update own tolerance if peer indicates a non-zero value */
@@ -2270,10 +2275,6 @@ static int tipc_link_proto_rcv(struct tipc_link *l, struct sk_buff *skb,
 			break;
 		}
 
-		/* Receive Gap ACK blocks from peer if any */
-		glen = tipc_get_gap_ack_blks(&ga, l, hdr, true);
-		if(glen > dlen)
-			break;
 		tipc_mon_rcv(l->net, data + glen, dlen - glen, l->addr,
 			     &l->mon_state, l->bearer_id);
 
-- 
2.34.1

[PATCH 5.10 24/71] net: ethernet: ti: cpts: Handle error for clk_enable

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 6babfc6e6fab068018c36e8f6605184b8c0b349d ]

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/cpts.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ti/cpts.c b/drivers/net/ethernet/ti/cpts.c
index 43222a34cba0..f9514518700e 100644
--- a/drivers/net/ethernet/ti/cpts.c
+++ b/drivers/net/ethernet/ti/cpts.c
@@ -568,7 +568,9 @@ int cpts_register(struct cpts *cpts)
 	for (i = 0; i < CPTS_MAX_EVENTS; i++)
 		list_add(&cpts->pool_data[i].list, &cpts->pool);
 
-	clk_enable(cpts->refclk);
+	err = clk_enable(cpts->refclk);
+	if (err)
+		return err;
 
 	cpts_write32(cpts, CPTS_EN, control);
 	cpts_write32(cpts, TS_PEND_EN, int_enable);
-- 
2.34.1

[PATCH 5.10 25/71] net: ethernet: lpc_eth: Handle error for clk_enable

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 2169b79258c8be803d2595d6456b1e77129fe154 ]

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/nxp/lpc_eth.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 9e098e40fb1c..a9a9bf2e065a 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -1468,6 +1468,7 @@ static int lpc_eth_drv_resume(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct netdata_local *pldat;
+	int ret;
 
 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(ndev->irq);
@@ -1477,7 +1478,9 @@ static int lpc_eth_drv_resume(struct platform_device *pdev)
 			pldat = netdev_priv(ndev);
 
 			/* Enable interface clock */
-			clk_enable(pldat->clk);
+			ret = clk_enable(pldat->clk);
+			if (ret)
+				return ret;
 
 			/* Reset and initialize */
 			__lpc_eth_reset(pldat);
-- 
2.34.1

[PATCH 5.10 26/71] ax25: Fix NULL pointer dereference in ax25_kill_by_device

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 71171ac8eb34ce7fe6b3267dce27c313ab3cb3ac ]

When two ax25 devices attempted to establish connection, the requester use ax25_create(),
ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to
accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the
ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug
caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding
fail log is shown below:

===============================================================
BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290
Call Trace:
...
ax25_device_event+0xfd/0x290
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x174/0x220
unregister_netdevice_many+0x1f7/0xa60
unregister_netdevice_queue+0x12f/0x170
unregister_netdev+0x13/0x20
mkiss_close+0xcd/0x140
tty_ldisc_release+0xc0/0x220
tty_release_struct+0x17/0xa0
tty_release+0x62d/0x670
...

This patch add condition check in ax25_kill_by_device(). If s->sk is
NULL, it will goto if branch to kill device.

Fixes: 4e0f718daf97 ("ax25: improve the incomplete fix to avoid UAF and NPD bugs")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ax25/af_ax25.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 23bd26057a82..9e0eef7fe9ad 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -87,6 +87,13 @@ static void ax25_kill_by_device(struct net_device *dev)
 	ax25_for_each(s, &ax25_list) {
 		if (s->ax25_dev == ax25_dev) {
 			sk = s->sk;
+			if (!sk) {
+				spin_unlock_bh(&ax25_list_lock);
+				s->ax25_dev = NULL;
+				ax25_disconnect(s, ENETUNREACH);
+				spin_lock_bh(&ax25_list_lock);
+				goto again;
+			}
 			sock_hold(sk);
 			spin_unlock_bh(&ax25_list_lock);
 			lock_sock(sk);
-- 
2.34.1

[PATCH 5.10 27/71] net/mlx5: Fix size field in bufferx_reg struct

[Greg Kroah-Hartman]

From: Mohammad Kabat <mohammadkab@nvidia.com>

[ Upstream commit ac77998b7ac3044f0509b097da9637184598980d ]

According to HW spec the field "size" should be 16 bits
in bufferx register.

Fixes: e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup")
Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mlx5/mlx5_ifc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index f5e829e12a76..eba1f1cbc9fb 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -9307,8 +9307,8 @@ struct mlx5_ifc_bufferx_reg_bits {
 	u8         reserved_at_0[0x6];
 	u8         lossy[0x1];
 	u8         epsb[0x1];
-	u8         reserved_at_8[0xc];
-	u8         size[0xc];
+	u8         reserved_at_8[0x8];
+	u8         size[0x10];
 
 	u8         xoff_threshold[0x10];
 	u8         xon_threshold[0x10];
-- 
2.34.1

[PATCH 5.10 28/71] net/mlx5: Fix a race on command flush flow

[Greg Kroah-Hartman]

From: Moshe Shemesh <moshe@nvidia.com>

[ Upstream commit 063bd355595428750803d8736a9bb7c8db67d42d ]

Fix a refcount use after free warning due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process released its refcount but didn't release the index yet. Fix it
by adding the needed spin lock.

It fixes the following warning trace:

refcount_t: addition on 0; use-after-free.
WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0
...
RIP: 0010:refcount_warn_saturate+0x80/0xe0
...
Call Trace:
 <TASK>
 mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core]
 mlx5_cmd_flush+0x3a/0xf0 [mlx5_core]
 enter_error_state+0x44/0x80 [mlx5_core]
 mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core]
 process_one_work+0x1be/0x390
 worker_thread+0x4d/0x3d0
 ? rescuer_thread+0x350/0x350
 kthread+0x141/0x160
 ? set_kthread_struct+0x40/0x40
 ret_from_fork+0x1f/0x30
 </TASK>

Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index 6af0dd847169..94426d29025e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -130,11 +130,8 @@ static int cmd_alloc_index(struct mlx5_cmd *cmd)
 
 static void cmd_free_index(struct mlx5_cmd *cmd, int idx)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&cmd->alloc_lock, flags);
+	lockdep_assert_held(&cmd->alloc_lock);
 	set_bit(idx, &cmd->bitmask);
-	spin_unlock_irqrestore(&cmd->alloc_lock, flags);
 }
 
 static void cmd_ent_get(struct mlx5_cmd_work_ent *ent)
@@ -144,17 +141,21 @@ static void cmd_ent_get(struct mlx5_cmd_work_ent *ent)
 
 static void cmd_ent_put(struct mlx5_cmd_work_ent *ent)
 {
+	struct mlx5_cmd *cmd = ent->cmd;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cmd->alloc_lock, flags);
 	if (!refcount_dec_and_test(&ent->refcnt))
-		return;
+		goto out;
 
 	if (ent->idx >= 0) {
-		struct mlx5_cmd *cmd = ent->cmd;
-
 		cmd_free_index(cmd, ent->idx);
 		up(ent->page_queue ? &cmd->pages_sem : &cmd->sem);
 	}
 
 	cmd_free_ent(ent);
+out:
+	spin_unlock_irqrestore(&cmd->alloc_lock, flags);
 }
 
 static struct mlx5_cmd_layout *get_inst(struct mlx5_cmd *cmd, int idx)
-- 
2.34.1

[PATCH 5.10 29/71] net/mlx5e: Lag, Only handle events from highest priority multipath entry

[Greg Kroah-Hartman]

From: Roi Dayan <roid@nvidia.com>

[ Upstream commit ad11c4f1d8fd1f03639460e425a36f7fd0ea83f5 ]

There could be multiple multipath entries but changing the port affinity
for each one doesn't make much sense and there should be a default one.
So only track the entry with lowest priority value.
The commit doesn't affect existing users with a single entry.

Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c
index 0f0d250bbc15..c04413f449c5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c
@@ -123,6 +123,10 @@ static void mlx5_lag_fib_route_event(struct mlx5_lag *ldev,
 		return;
 	}
 
+	/* Handle multipath entry with lower priority value */
+	if (mp->mfi && mp->mfi != fi && fi->fib_priority >= mp->mfi->fib_priority)
+		return;
+
 	/* Handle add/replace event */
 	nhs = fib_info_num_path(fi);
 	if (nhs == 1) {
@@ -132,12 +136,13 @@ static void mlx5_lag_fib_route_event(struct mlx5_lag *ldev,
 			int i = mlx5_lag_dev_get_netdev_idx(ldev, nh_dev);
 
 			if (i < 0)
-				i = MLX5_LAG_NORMAL_AFFINITY;
-			else
-				++i;
+				return;
 
+			i++;
 			mlx5_lag_set_port_affinity(ldev, i);
 		}
+
+		mp->mfi = fi;
 		return;
 	}
 
-- 
2.34.1

[PATCH 5.10 30/71] NFC: port100: fix use-after-free in port100_send_complete

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit f80cfe2f26581f188429c12bd937eb905ad3ac7b ]

Syzbot reported UAF in port100_send_complete(). The root case is in
missing usb_kill_urb() calls on error handling path of ->probe function.

port100_send_complete() accesses devm allocated memory which will be
freed on probe failure. We should kill this urbs before returning an
error from probe function to prevent reported use-after-free

Fail log:

BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26
...
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670

...

Allocated by task 1255:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track mm/kasan/common.c:45 [inline]
 set_alloc_info mm/kasan/common.c:436 [inline]
 ____kasan_kmalloc mm/kasan/common.c:515 [inline]
 ____kasan_kmalloc mm/kasan/common.c:474 [inline]
 __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524
 alloc_dr drivers/base/devres.c:116 [inline]
 devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823
 devm_kzalloc include/linux/device.h:209 [inline]
 port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502

Freed by task 1255:
 kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
 kasan_set_track+0x21/0x30 mm/kasan/common.c:45
 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
 ____kasan_slab_free mm/kasan/common.c:366 [inline]
 ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328
 kasan_slab_free include/linux/kasan.h:236 [inline]
 __cache_free mm/slab.c:3437 [inline]
 kfree+0xf8/0x2b0 mm/slab.c:3794
 release_nodes+0x112/0x1a0 drivers/base/devres.c:501
 devres_release_all+0x114/0x190 drivers/base/devres.c:530
 really_probe+0x626/0xcc0 drivers/base/dd.c:670

Reported-and-tested-by: syzbot+16bcb127fb73baeecb14@syzkaller.appspotmail.com
Fixes: 0347a6ab300a ("NFC: port100: Commands mechanism implementation")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308185007.6987-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/port100.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c
index 1caebefb25ff..2ae1474faede 100644
--- a/drivers/nfc/port100.c
+++ b/drivers/nfc/port100.c
@@ -1609,7 +1609,9 @@ static int port100_probe(struct usb_interface *interface,
 	nfc_digital_free_device(dev->nfc_digital_dev);
 
 error:
+	usb_kill_urb(dev->in_urb);
 	usb_free_urb(dev->in_urb);
+	usb_kill_urb(dev->out_urb);
 	usb_free_urb(dev->out_urb);
 	usb_put_dev(dev->udev);
 
-- 
2.34.1

[PATCH 5.10 31/71] selftests: pmtu.sh: Kill tcpdump processes launched by subshell.

[Greg Kroah-Hartman]

From: Guillaume Nault <gnault@redhat.com>

[ Upstream commit 18dfc667550fe9c032a6dcc3402b50e691e18029 ]

The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:

$ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception
TEST: ipv4: PMTU exceptions                                         [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects                       [ OK ]

$ pgrep -af tcpdump
6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap

Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.

Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.

Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.

Fixes: a92a0a7b8e7c ("selftests: pmtu: Simplify cleanup and namespace names")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/pmtu.sh | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index 3367fb5f2fef..3253fdc780d6 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -799,7 +799,6 @@ setup_ovs_bridge() {
 setup() {
 	[ "$(id -u)" -ne 0 ] && echo "  need to run as root" && return $ksft_skip
 
-	cleanup
 	for arg do
 		eval setup_${arg} || { echo "  ${arg} not supported"; return 1; }
 	done
@@ -810,7 +809,7 @@ trace() {
 
 	for arg do
 		[ "${ns_cmd}" = "" ] && ns_cmd="${arg}" && continue
-		${ns_cmd} tcpdump -s 0 -i "${arg}" -w "${name}_${arg}.pcap" 2> /dev/null &
+		${ns_cmd} tcpdump --immediate-mode -s 0 -i "${arg}" -w "${name}_${arg}.pcap" 2> /dev/null &
 		tcpdump_pids="${tcpdump_pids} $!"
 		ns_cmd=
 	done
@@ -1636,6 +1635,10 @@ run_test() {
 
 	unset IFS
 
+	# Since cleanup() relies on variables modified by this subshell, it
+	# has to run in this context.
+	trap cleanup EXIT
+
 	if [ "$VERBOSE" = "1" ]; then
 		printf "\n##########################################################################\n\n"
 	fi
-- 
2.34.1

[PATCH 5.10 32/71] gpio: ts4900: Do not set DAT and OE together

[Greg Kroah-Hartman]

From: Mark Featherston <mark@embeddedTS.com>

[ Upstream commit 03fe003547975680fdb9ff5ab0e41cb68276c4f2 ]

This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.

Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.

Fixes: 9c6686322d74 ("gpio: add Technologic I2C-FPGA gpio support")
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-ts4900.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/gpio-ts4900.c b/drivers/gpio/gpio-ts4900.c
index d885032cf814..d918d2df4de2 100644
--- a/drivers/gpio/gpio-ts4900.c
+++ b/drivers/gpio/gpio-ts4900.c
@@ -1,7 +1,7 @@
 /*
  * Digital I/O driver for Technologic Systems I2C FPGA Core
  *
- * Copyright (C) 2015 Technologic Systems
+ * Copyright (C) 2015, 2018 Technologic Systems
  * Copyright (C) 2016 Savoir-Faire Linux
  *
  * This program is free software; you can redistribute it and/or
@@ -55,19 +55,33 @@ static int ts4900_gpio_direction_input(struct gpio_chip *chip,
 {
 	struct ts4900_gpio_priv *priv = gpiochip_get_data(chip);
 
-	/*
-	 * This will clear the output enable bit, the other bits are
-	 * dontcare when this is cleared
+	/* Only clear the OE bit here, requires a RMW. Prevents potential issue
+	 * with OE and data getting to the physical pin at different times.
 	 */
-	return regmap_write(priv->regmap, offset, 0);
+	return regmap_update_bits(priv->regmap, offset, TS4900_GPIO_OE, 0);
 }
 
 static int ts4900_gpio_direction_output(struct gpio_chip *chip,
 					unsigned int offset, int value)
 {
 	struct ts4900_gpio_priv *priv = gpiochip_get_data(chip);
+	unsigned int reg;
 	int ret;
 
+	/* If changing from an input to an output, we need to first set the
+	 * proper data bit to what is requested and then set OE bit. This
+	 * prevents a glitch that can occur on the IO line
+	 */
+	regmap_read(priv->regmap, offset, &reg);
+	if (!(reg & TS4900_GPIO_OE)) {
+		if (value)
+			reg = TS4900_GPIO_OUT;
+		else
+			reg &= ~TS4900_GPIO_OUT;
+
+		regmap_write(priv->regmap, offset, reg);
+	}
+
 	if (value)
 		ret = regmap_write(priv->regmap, offset, TS4900_GPIO_OE |
 							 TS4900_GPIO_OUT);
-- 
2.34.1

[PATCH 5.10 33/71] gianfar: ethtool: Fix refcount leak in gfar_get_ts_info

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit 2ac5b58e645c66932438bb021cb5b52097ce70b0 ]

The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: 7349a74ea75c ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/gianfar_ethtool.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index cc7d4f93da54..799a1486f586 100644
--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -1456,6 +1456,7 @@ static int gfar_get_ts_info(struct net_device *dev,
 	ptp_node = of_find_compatible_node(NULL, NULL, "fsl,etsec-ptp");
 	if (ptp_node) {
 		ptp_dev = of_find_device_by_node(ptp_node);
+		of_node_put(ptp_node);
 		if (ptp_dev)
 			ptp = platform_get_drvdata(ptp_dev);
 	}
-- 
2.34.1

[PATCH 5.10 34/71] net: phy: DP83822: clear MISR2 register to disable interrupts

[Greg Kroah-Hartman]

From: Clément Léger <clement.leger@bootlin.com>

[ Upstream commit 37c9d66c95564c85a001d8a035354f0220a1e1c3 ]

MISR1 was cleared twice but the original author intention was probably
to clear MISR1 & MISR2 to completely disable interrupts. Fix it to
clear MISR2.

Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83822.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 7bf43031cea8..3d75b98f3051 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -289,7 +289,7 @@ static int dp83822_config_intr(struct phy_device *phydev)
 		if (err < 0)
 			return err;
 
-		err = phy_write(phydev, MII_DP83822_MISR1, 0);
+		err = phy_write(phydev, MII_DP83822_MISR2, 0);
 		if (err < 0)
 			return err;
 
-- 
2.34.1

[PATCH 5.10 35/71] sctp: fix kernel-infoleak for SCTP sockets

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 633593a808980f82d251d0ca89730d8bb8b0220c ]

syzbot reported a kernel infoleak [1] of 4 bytes.

After analysis, it turned out r->idiag_expires is not initialized
if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()

Make sure to clear idiag_timer/idiag_retrans/idiag_expires
and let inet_diag_msg_sctpasoc_fill() fill them again if needed.

[1]

BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 instrument_copy_to_user include/linux/instrumented.h:121 [inline]
 copyout lib/iov_iter.c:154 [inline]
 _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 copy_to_iter include/linux/uio.h:162 [inline]
 simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
 netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 __sys_recvfrom+0x795/0xa10 net/socket.c:2097
 __do_sys_recvfrom net/socket.c:2115 [inline]
 __se_sys_recvfrom net/socket.c:2111 [inline]
 __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3247 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1158 [inline]
 netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
 netlink_dump_start include/linux/netlink.h:254 [inline]
 inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
 sock_diag_rcv_msg+0x24a/0x620
 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 sock_write_iter+0x594/0x690 net/socket.c:1061
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_write+0x52c/0x1500 fs/read_write.c:851
 vfs_writev fs/read_write.c:924 [inline]
 do_writev+0x645/0xe00 fs/read_write.c:967
 __do_sys_writev fs/read_write.c:1040 [inline]
 __se_sys_writev fs/read_write.c:1037 [inline]
 __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Bytes 68-71 of 2508 are uninitialized
Memory access of size 2508 starts at ffff888114f9b000
Data copied to user address 00007f7fe09ff2e0

CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/diag.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/net/sctp/diag.c b/net/sctp/diag.c
index babadd6720a2..68ff82ff49a3 100644
--- a/net/sctp/diag.c
+++ b/net/sctp/diag.c
@@ -61,10 +61,6 @@ static void inet_diag_msg_sctpasoc_fill(struct inet_diag_msg *r,
 		r->idiag_timer = SCTP_EVENT_TIMEOUT_T3_RTX;
 		r->idiag_retrans = asoc->rtx_data_chunks;
 		r->idiag_expires = jiffies_to_msecs(t3_rtx->expires - jiffies);
-	} else {
-		r->idiag_timer = 0;
-		r->idiag_retrans = 0;
-		r->idiag_expires = 0;
 	}
 }
 
@@ -144,13 +140,14 @@ static int inet_sctp_diag_fill(struct sock *sk, struct sctp_association *asoc,
 	r = nlmsg_data(nlh);
 	BUG_ON(!sk_fullsock(sk));
 
+	r->idiag_timer = 0;
+	r->idiag_retrans = 0;
+	r->idiag_expires = 0;
 	if (asoc) {
 		inet_diag_msg_sctpasoc_fill(r, sk, asoc);
 	} else {
 		inet_diag_msg_common_fill(r, sk);
 		r->idiag_state = sk->sk_state;
-		r->idiag_timer = 0;
-		r->idiag_retrans = 0;
 	}
 
 	if (inet_diag_msg_attrs_fill(sk, skb, r, ext, user_ns, net_admin))
-- 
2.34.1

[PATCH 5.10 36/71] net: bcmgenet: Dont claim WOL when its not available

[Greg Kroah-Hartman]

From: Jeremy Linton <jeremy.linton@arm.com>

[ Upstream commit 00b022f8f876a3a036b0df7f971001bef6398605 ]

Some of the bcmgenet platforms don't correctly support WOL, yet
ethtool returns:

"Supports Wake-on: gsf"

which is false.

Ideally if there isn't a wol_irq, or there is something else that
keeps the device from being able to wakeup it should display:

"Supports Wake-on: d"

This patch checks whether the device can wakup, before using the
hard-coded supported flags. This corrects the ethtool reporting, as
well as the WOL configuration because ethtool verifies that the mode
is supported before attempting it.

Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
index e84ad587fb21..2c2a56d5a0a1 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -41,6 +41,13 @@
 void bcmgenet_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct device *kdev = &priv->pdev->dev;
+
+	if (!device_can_wakeup(kdev)) {
+		wol->supported = 0;
+		wol->wolopts = 0;
+		return;
+	}
 
 	wol->supported = WAKE_MAGIC | WAKE_MAGICSECURE | WAKE_FILTER;
 	wol->wolopts = priv->wolopts;
-- 
2.34.1

[PATCH 5.10 37/71] selftests/bpf: Add test for bpf_timer overwriting crash

[Greg Kroah-Hartman]

From: Kumar Kartikeya Dwivedi <memxor@gmail.com>

[ Upstream commit a7e75016a0753c24d6c995bc02501ae35368e333 ]

Add a test that validates that timer value is not overwritten when doing
a copy_map_value call in the kernel. Without the prior fix, this test
triggers a crash.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/prog_tests/timer_crash.c    | 32 +++++++++++
 .../testing/selftests/bpf/progs/timer_crash.c | 54 +++++++++++++++++++
 2 files changed, 86 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/timer_crash.c
 create mode 100644 tools/testing/selftests/bpf/progs/timer_crash.c

diff --git a/tools/testing/selftests/bpf/prog_tests/timer_crash.c b/tools/testing/selftests/bpf/prog_tests/timer_crash.c
new file mode 100644
index 000000000000..f74b82305da8
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/timer_crash.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <test_progs.h>
+#include "timer_crash.skel.h"
+
+enum {
+	MODE_ARRAY,
+	MODE_HASH,
+};
+
+static void test_timer_crash_mode(int mode)
+{
+	struct timer_crash *skel;
+
+	skel = timer_crash__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "timer_crash__open_and_load"))
+		return;
+	skel->bss->pid = getpid();
+	skel->bss->crash_map = mode;
+	if (!ASSERT_OK(timer_crash__attach(skel), "timer_crash__attach"))
+		goto end;
+	usleep(1);
+end:
+	timer_crash__destroy(skel);
+}
+
+void test_timer_crash(void)
+{
+	if (test__start_subtest("array"))
+		test_timer_crash_mode(MODE_ARRAY);
+	if (test__start_subtest("hash"))
+		test_timer_crash_mode(MODE_HASH);
+}
diff --git a/tools/testing/selftests/bpf/progs/timer_crash.c b/tools/testing/selftests/bpf/progs/timer_crash.c
new file mode 100644
index 000000000000..f8f7944e70da
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/timer_crash.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <vmlinux.h>
+#include <bpf/bpf_tracing.h>
+#include <bpf/bpf_helpers.h>
+
+struct map_elem {
+	struct bpf_timer timer;
+	struct bpf_spin_lock lock;
+};
+
+struct {
+	__uint(type, BPF_MAP_TYPE_ARRAY);
+	__uint(max_entries, 1);
+	__type(key, int);
+	__type(value, struct map_elem);
+} amap SEC(".maps");
+
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__uint(max_entries, 1);
+	__type(key, int);
+	__type(value, struct map_elem);
+} hmap SEC(".maps");
+
+int pid = 0;
+int crash_map = 0; /* 0 for amap, 1 for hmap */
+
+SEC("fentry/do_nanosleep")
+int sys_enter(void *ctx)
+{
+	struct map_elem *e, value = {};
+	void *map = crash_map ? (void *)&hmap : (void *)&amap;
+
+	if (bpf_get_current_task_btf()->tgid != pid)
+		return 0;
+
+	*(void **)&value = (void *)0xdeadcaf3;
+
+	bpf_map_update_elem(map, &(int){0}, &value, 0);
+	/* For array map, doing bpf_map_update_elem will do a
+	 * check_and_free_timer_in_array, which will trigger the crash if timer
+	 * pointer was overwritten, for hmap we need to use bpf_timer_cancel.
+	 */
+	if (crash_map == 1) {
+		e = bpf_map_lookup_elem(map, &(int){0});
+		if (!e)
+			return 0;
+		bpf_timer_cancel(&e->timer);
+	}
+	return 0;
+}
+
+char _license[] SEC("license") = "GPL";
-- 
2.34.1

[PATCH 5.10 38/71] spi: rockchip: Fix error in getting num-cs property

[Greg Kroah-Hartman]

From: Jon Lin <jon.lin@rock-chips.com>

[ Upstream commit 9382df0a98aad5bbcd4d634790305a1d786ad224 ]

Get num-cs u32 from dts of_node property rather than u16.

Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-2-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-rockchip.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 624273d0e727..a59431075411 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -636,7 +636,7 @@ static int rockchip_spi_probe(struct platform_device *pdev)
 	struct spi_controller *ctlr;
 	struct resource *mem;
 	struct device_node *np = pdev->dev.of_node;
-	u32 rsd_nsecs;
+	u32 rsd_nsecs, num_cs;
 	bool slave_mode;
 
 	slave_mode = of_property_read_bool(np, "spi-slave");
@@ -744,8 +744,9 @@ static int rockchip_spi_probe(struct platform_device *pdev)
 		 * rk spi0 has two native cs, spi1..5 one cs only
 		 * if num-cs is missing in the dts, default to 1
 		 */
-		if (of_property_read_u16(np, "num-cs", &ctlr->num_chipselect))
-			ctlr->num_chipselect = 1;
+		if (of_property_read_u32(np, "num-cs", &num_cs))
+			num_cs = 1;
+		ctlr->num_chipselect = num_cs;
 		ctlr->use_gpio_descriptors = true;
 	}
 	ctlr->dev.of_node = pdev->dev.of_node;
-- 
2.34.1

[PATCH 5.10 39/71] spi: rockchip: terminate dma transmission when slave abort

[Greg Kroah-Hartman]

From: Jon Lin <jon.lin@rock-chips.com>

[ Upstream commit 80808768e41324d2e23de89972b5406c1020e6e4 ]

After slave abort, all DMA should be stopped, or it will affect the
next transmission and maybe abort again.

Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-3-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-rockchip.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index a59431075411..a9f97023d5a0 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -567,6 +567,12 @@ static int rockchip_spi_slave_abort(struct spi_controller *ctlr)
 {
 	struct rockchip_spi *rs = spi_controller_get_devdata(ctlr);
 
+	if (atomic_read(&rs->state) & RXDMA)
+		dmaengine_terminate_sync(ctlr->dma_rx);
+	if (atomic_read(&rs->state) & TXDMA)
+		dmaengine_terminate_sync(ctlr->dma_tx);
+	atomic_set(&rs->state, 0);
+	spi_enable_chip(rs, false);
 	rs->slave_abort = true;
 	complete(&ctlr->xfer_completion);
 
-- 
2.34.1

[PATCH 5.10 40/71] net-sysfs: add check for netdevice being present to speed_show

[Greg Kroah-Hartman]

From: suresh kumar <suresh2514@gmail.com>

[ Upstream commit 4224cfd7fb6523f7a9d1c8bb91bb5df1e38eb624 ]

When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.

    [  755.549084] mlx5_core 0000:12:00.1: Shutdown was called
    [  756.404455] mlx5_core 0000:12:00.0: Shutdown was called
    ...
    [  757.937260] BUG: unable to handle kernel NULL pointer dereference at           (null)
    [  758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280

    crash> bt
    ...
    PID: 12649  TASK: ffff8924108f2100  CPU: 1   COMMAND: "amsd"
    ...
     #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
        [exception RIP: dma_pool_alloc+0x1ab]
        RIP: ffffffff8ee11acb  RSP: ffff89240e1a3968  RFLAGS: 00010046
        RAX: 0000000000000246  RBX: ffff89243d874100  RCX: 0000000000001000
        RDX: 0000000000000000  RSI: 0000000000000246  RDI: ffff89243d874090
        RBP: ffff89240e1a39c0   R8: 000000000001f080   R9: ffff8905ffc03c00
        R10: ffffffffc04680d4  R11: ffffffff8edde9fd  R12: 00000000000080d0
        R13: ffff89243d874090  R14: ffff89243d874080  R15: 0000000000000000
        ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
    #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
    #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
    #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
    #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
    #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
    #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
    #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
    #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
    #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
    #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
    #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
    #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
    #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
    #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
    #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
    #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92

    crash> net_device.state ffff89443b0c0000
      state = 0x5  (__LINK_STATE_START| __LINK_STATE_NOCARRIER)

To prevent this scenario, we also make sure that the netdevice is present.

Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/net-sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 99303897b7bb..989b3f7ee85f 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -213,7 +213,7 @@ static ssize_t speed_show(struct device *dev,
 	if (!rtnl_trylock())
 		return restart_syscall();
 
-	if (netif_running(netdev)) {
+	if (netif_running(netdev) && netif_device_present(netdev)) {
 		struct ethtool_link_ksettings cmd;
 
 		if (!__ethtool_get_link_ksettings(netdev, &cmd))
-- 
2.34.1

[PATCH 5.10 41/71] hwmon: (pmbus) Clear pmbus fault/warning bits after read

[Greg Kroah-Hartman]

From: Vikash Chandola <vikash.chandola@linux.intel.com>

[ Upstream commit 35f165f08950a876f1b95a61d79c93678fba2fd6 ]

Almost all fault/warning bits in pmbus status registers remain set even
after fault/warning condition are removed. As per pmbus specification
these faults must be cleared by user.
Modify hwmon behavior to clear fault/warning bit after fetching data if
fault/warning bit was set. This allows to get fresh data in next read.

Signed-off-by: Vikash Chandola <vikash.chandola@linux.intel.com>
Link: https://lore.kernel.org/r/20220222131253.2426834-1-vikash.chandola@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/pmbus/pmbus_core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index b0e2820a2d57..71798fde2ef0 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -898,6 +898,11 @@ static int pmbus_get_boolean(struct i2c_client *client, struct pmbus_boolean *b,
 		pmbus_update_sensor_data(client, s2);
 
 	regval = status & mask;
+	if (regval) {
+		ret = pmbus_write_byte_data(client, page, reg, regval);
+		if (ret)
+			goto unlock;
+	}
 	if (s1 && s2) {
 		s64 v1, v2;
 
-- 
2.34.1

[PATCH 5.10 42/71] gpio: Return EPROBE_DEFER if gc->to_irq is NULL

[Greg Kroah-Hartman]

From: Shreeya Patel <shreeya.patel@collabora.com>

[ Upstream commit ae42f9288846353982e2eab181fb41e7fd8bf60f ]

We are racing the registering of .to_irq when probing the
i2c driver. This results in random failure of touchscreen
devices.

Following explains the race condition better.

[gpio driver] gpio driver registers gpio chip
[gpio consumer] gpio is acquired
[gpio consumer] gpiod_to_irq() fails with -ENXIO
[gpio driver] gpio driver registers irqchip
gpiod_to_irq works at this point, but -ENXIO is fatal

We could see the following errors in dmesg logs when gc->to_irq is NULL

[2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ
[2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22

To avoid this situation, defer probing until to_irq is registered.
Returning -EPROBE_DEFER would be the first step towards avoiding
the failure of devices due to the race in registration of .to_irq.
Final solution to this issue would be to avoid using gc irq members
until they are fully initialized.

This issue has been reported many times in past and people have been
using workarounds like changing the pinctrl_amd to built-in instead
of loading it as a module or by adding a softdep for pinctrl_amd into
the config file.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209413
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index af5bb8fedfea..00526fdd7691 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3215,6 +3215,16 @@ int gpiod_to_irq(const struct gpio_desc *desc)
 
 		return retirq;
 	}
+#ifdef CONFIG_GPIOLIB_IRQCHIP
+	if (gc->irq.chip) {
+		/*
+		 * Avoid race condition with other code, which tries to lookup
+		 * an IRQ before the irqchip has been properly registered,
+		 * i.e. while gpiochip is still being brought up.
+		 */
+		return -EPROBE_DEFER;
+	}
+#endif
 	return -ENXIO;
 }
 EXPORT_SYMBOL_GPL(gpiod_to_irq);
-- 
2.34.1

[PATCH 5.10 43/71] Revert "xen-netback: remove hotplug-status once it has served its purpose"

[Greg Kroah-Hartman]

From: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

[ Upstream commit 0f4558ae91870692ce7f509c31c9d6ee721d8cdc ]

This reverts commit 1f2565780e9b7218cf92c7630130e82dcc0fe9c2.

The 'hotplug-status' node should not be removed as long as the vif
device remains configured. Otherwise the xen-netback would wait for
re-running the network script even if it was already called (in case of
the frontent re-connecting). But also, it _should_ be removed when the
vif device is destroyed (for example when unbinding the driver) -
otherwise hotplug script would not configure the device whenever it
re-appear.

Moving removal of the 'hotplug-status' node was a workaround for nothing
calling network script after xen-netback module is reloaded. But when
vif interface is re-created (on xen-netback unbind/bind for example),
the script should be called, regardless of who does that - currently
this case is not handled by the toolstack, and requires manual
script call. Keeping hotplug-status=connected to skip the call is wrong
and leads to not configured interface.

More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netback/xenbus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c
index 94d19158efc1..7acf3940dc1f 100644
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -256,6 +256,7 @@ static void backend_disconnect(struct backend_info *be)
 		unsigned int queue_index;
 
 		xen_unregister_watchers(vif);
+		xenbus_rm(XBT_NIL, be->dev->nodename, "hotplug-status");
 #ifdef CONFIG_DEBUG_FS
 		xenvif_debugfs_delif(vif);
 #endif /* CONFIG_DEBUG_FS */
@@ -675,7 +676,6 @@ static void hotplug_status_changed(struct xenbus_watch *watch,
 
 		/* Not interested in this watch anymore. */
 		unregister_hotplug_status_watch(be);
-		xenbus_rm(XBT_NIL, be->dev->nodename, "hotplug-status");
 	}
 	kfree(str);
 }
-- 
2.34.1

[PATCH 5.10 44/71] Revert "xen-netback: Check for hotplug-status existence before watching"

[Greg Kroah-Hartman]

From: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

[ Upstream commit e8240addd0a3919e0fd7436416afe9aa6429c484 ]

This reverts commit 2afeec08ab5c86ae21952151f726bfe184f6b23d.

The reasoning in the commit was wrong - the code expected to setup the
watch even if 'hotplug-status' didn't exist. In fact, it relied on the
watch being fired the first time - to check if maybe 'hotplug-status' is
already set to 'connected'. Not registering a watch for non-existing
path (which is the case if hotplug script hasn't been executed yet),
made the backend not waiting for the hotplug script to execute. This in
turns, made the netfront think the interface is fully operational, while
in fact it was not (the vif interface on xen-netback side might not be
configured yet).

This was a workaround for 'hotplug-status' erroneously being removed.
But since that is reverted now, the workaround is not necessary either.

More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Michael Brown <mbrown@fensystems.co.uk>
Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netback/xenbus.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c
index 7acf3940dc1f..ca261e0fc9c9 100644
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -824,15 +824,11 @@ static void connect(struct backend_info *be)
 	xenvif_carrier_on(be->vif);
 
 	unregister_hotplug_status_watch(be);
-	if (xenbus_exists(XBT_NIL, dev->nodename, "hotplug-status")) {
-		err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch,
-					   NULL, hotplug_status_changed,
-					   "%s/%s", dev->nodename,
-					   "hotplug-status");
-		if (err)
-			goto err;
+	err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, NULL,
+				   hotplug_status_changed,
+				   "%s/%s", dev->nodename, "hotplug-status");
+	if (!err)
 		be->have_hotplug_status_watch = 1;
-	}
 
 	netif_tx_wake_all_queues(be->vif->dev);
 
-- 
2.34.1

[PATCH 5.10 45/71] ipv6: prevent a possible race condition with lifetimes

[Greg Kroah-Hartman]

From: Niels Dossche <dossche.niels@gmail.com>

[ Upstream commit 6c0d8833a605e195ae219b5042577ce52bf71fff ]

valid_lft, prefered_lft and tstamp are always accessed under the lock
"lock" in other places. Reading these without taking the lock may result
in inconsistencies regarding the calculation of the valid and preferred
variables since decisions are taken on these fields for those variables.

Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/addrconf.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 072c34823753..7c5bf39dca5d 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4979,6 +4979,7 @@ static int inet6_fill_ifaddr(struct sk_buff *skb, struct inet6_ifaddr *ifa,
 	    nla_put_s32(skb, IFA_TARGET_NETNSID, args->netnsid))
 		goto error;
 
+	spin_lock_bh(&ifa->lock);
 	if (!((ifa->flags&IFA_F_PERMANENT) &&
 	      (ifa->prefered_lft == INFINITY_LIFE_TIME))) {
 		preferred = ifa->prefered_lft;
@@ -5000,6 +5001,7 @@ static int inet6_fill_ifaddr(struct sk_buff *skb, struct inet6_ifaddr *ifa,
 		preferred = INFINITY_LIFE_TIME;
 		valid = INFINITY_LIFE_TIME;
 	}
+	spin_unlock_bh(&ifa->lock);
 
 	if (!ipv6_addr_any(&ifa->peer_addr)) {
 		if (nla_put_in6_addr(skb, IFA_LOCAL, &ifa->addr) < 0 ||
-- 
2.34.1

[PATCH 5.10 46/71] tracing: Ensure trace buffer is at least 4096 bytes large

[Greg Kroah-Hartman]

From: Sven Schnelle <svens@linux.ibm.com>

[ Upstream commit 7acf3a127bb7c65ff39099afd78960e77b2ca5de ]

Booting the kernel with 'trace_buf_size=1' give a warning at
boot during the ftrace selftests:

[    0.892809] Running postponed tracer tests:
[    0.892893] Testing tracer function:
[    0.901899] Callback from call_rcu_tasks_trace() invoked.
[    0.983829] Callback from call_rcu_tasks_rude() invoked.
[    1.072003] .. bad ring buffer .. corrupted trace buffer ..
[    1.091944] Callback from call_rcu_tasks() invoked.
[    1.097695] PASSED
[    1.097701] Testing dynamic ftrace: .. filter failed count=0 ..FAILED!
[    1.353474] ------------[ cut here ]------------
[    1.353478] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1951 run_tracer_selftest+0x13c/0x1b0

Therefore enforce a minimum of 4096 bytes to make the selftest pass.

Link: https://lkml.kernel.org/r/20220214134456.1751749-1-svens@linux.ibm.com

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 71ed0616d83b..953dd9568dd7 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1490,10 +1490,12 @@ static int __init set_buf_size(char *str)
 	if (!str)
 		return 0;
 	buf_size = memparse(str, &str);
-	/* nr_entries can not be zero */
-	if (buf_size == 0)
-		return 0;
-	trace_buf_size = buf_size;
+	/*
+	 * nr_entries can not be zero and the startup
+	 * tests require some buffer space. Therefore
+	 * ensure we have at least 4096 bytes of buffer.
+	 */
+	trace_buf_size = max(4096UL, buf_size);
 	return 1;
 }
 __setup("trace_buf_size=", set_buf_size);
-- 
2.34.1

[PATCH 5.10 47/71] selftest/vm: fix map_fixed_noreplace test failure

[Greg Kroah-Hartman]

From: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

[ Upstream commit f39c58008dee7ab5fc94c3f1995a21e886801df0 ]

On the latest RHEL the test fails due to executable mapped at 256MB
address

     # ./map_fixed_noreplace
    mmap() @ 0x10000000-0x10050000 p=0xffffffffffffffff result=File exists
    10000000-10010000 r-xp 00000000 fd:04 34905657                           /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
    10010000-10020000 r--p 00000000 fd:04 34905657                           /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
    10020000-10030000 rw-p 00010000 fd:04 34905657                           /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
    10029b90000-10029bc0000 rw-p 00000000 00:00 0                            [heap]
    7fffbb510000-7fffbb750000 r-xp 00000000 fd:04 24534                      /usr/lib64/libc.so.6
    7fffbb750000-7fffbb760000 r--p 00230000 fd:04 24534                      /usr/lib64/libc.so.6
    7fffbb760000-7fffbb770000 rw-p 00240000 fd:04 24534                      /usr/lib64/libc.so.6
    7fffbb780000-7fffbb7a0000 r--p 00000000 00:00 0                          [vvar]
    7fffbb7a0000-7fffbb7b0000 r-xp 00000000 00:00 0                          [vdso]
    7fffbb7b0000-7fffbb800000 r-xp 00000000 fd:04 24514                      /usr/lib64/ld64.so.2
    7fffbb800000-7fffbb810000 r--p 00040000 fd:04 24514                      /usr/lib64/ld64.so.2
    7fffbb810000-7fffbb820000 rw-p 00050000 fd:04 24514                      /usr/lib64/ld64.so.2
    7fffd93f0000-7fffd9420000 rw-p 00000000 00:00 0                          [stack]
    Error: couldn't map the space we need for the test

Fix this by finding a free address using mmap instead of hardcoding
BASE_ADDRESS.

Link: https://lkml.kernel.org/r/20220217083417.373823-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jann Horn <jannh@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/vm/map_fixed_noreplace.c        | 49 ++++++++++++++-----
 1 file changed, 37 insertions(+), 12 deletions(-)

diff --git a/tools/testing/selftests/vm/map_fixed_noreplace.c b/tools/testing/selftests/vm/map_fixed_noreplace.c
index d91bde511268..eed44322d1a6 100644
--- a/tools/testing/selftests/vm/map_fixed_noreplace.c
+++ b/tools/testing/selftests/vm/map_fixed_noreplace.c
@@ -17,9 +17,6 @@
 #define MAP_FIXED_NOREPLACE 0x100000
 #endif
 
-#define BASE_ADDRESS	(256ul * 1024 * 1024)
-
-
 static void dump_maps(void)
 {
 	char cmd[32];
@@ -28,18 +25,46 @@ static void dump_maps(void)
 	system(cmd);
 }
 
+static unsigned long find_base_addr(unsigned long size)
+{
+	void *addr;
+	unsigned long flags;
+
+	flags = MAP_PRIVATE | MAP_ANONYMOUS;
+	addr = mmap(NULL, size, PROT_NONE, flags, -1, 0);
+	if (addr == MAP_FAILED) {
+		printf("Error: couldn't map the space we need for the test\n");
+		return 0;
+	}
+
+	if (munmap(addr, size) != 0) {
+		printf("Error: couldn't map the space we need for the test\n");
+		return 0;
+	}
+	return (unsigned long)addr;
+}
+
 int main(void)
 {
+	unsigned long base_addr;
 	unsigned long flags, addr, size, page_size;
 	char *p;
 
 	page_size = sysconf(_SC_PAGE_SIZE);
 
+	//let's find a base addr that is free before we start the tests
+	size = 5 * page_size;
+	base_addr = find_base_addr(size);
+	if (!base_addr) {
+		printf("Error: couldn't map the space we need for the test\n");
+		return 1;
+	}
+
 	flags = MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED_NOREPLACE;
 
 	// Check we can map all the areas we need below
 	errno = 0;
-	addr = BASE_ADDRESS;
+	addr = base_addr;
 	size = 5 * page_size;
 	p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0);
 
@@ -60,7 +85,7 @@ int main(void)
 	printf("unmap() successful\n");
 
 	errno = 0;
-	addr = BASE_ADDRESS + page_size;
+	addr = base_addr + page_size;
 	size = 3 * page_size;
 	p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0);
 	printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
@@ -80,7 +105,7 @@ int main(void)
 	 *     +4 |  free  | new
 	 */
 	errno = 0;
-	addr = BASE_ADDRESS;
+	addr = base_addr;
 	size = 5 * page_size;
 	p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0);
 	printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
@@ -101,7 +126,7 @@ int main(void)
 	 *     +4 |  free  |
 	 */
 	errno = 0;
-	addr = BASE_ADDRESS + (2 * page_size);
+	addr = base_addr + (2 * page_size);
 	size = page_size;
 	p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0);
 	printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
@@ -121,7 +146,7 @@ int main(void)
 	 *     +4 |  free  | new
 	 */
 	errno = 0;
-	addr = BASE_ADDRESS + (3 * page_size);
+	addr = base_addr + (3 * page_size);
 	size = 2 * page_size;
 	p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0);
 	printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
@@ -141,7 +166,7 @@ int main(void)
 	 *     +4 |  free  |
 	 */
 	errno = 0;
-	addr = BASE_ADDRESS;
+	addr = base_addr;
 	size = 2 * page_size;
 	p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0);
 	printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
@@ -161,7 +186,7 @@ int main(void)
 	 *     +4 |  free  |
 	 */
 	errno = 0;
-	addr = BASE_ADDRESS;
+	addr = base_addr;
 	size = page_size;
 	p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0);
 	printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
@@ -181,7 +206,7 @@ int main(void)
 	 *     +4 |  free  |  new
 	 */
 	errno = 0;
-	addr = BASE_ADDRESS + (4 * page_size);
+	addr = base_addr + (4 * page_size);
 	size = page_size;
 	p = mmap((void *)addr, size, PROT_NONE, flags, -1, 0);
 	printf("mmap() @ 0x%lx-0x%lx p=%p result=%m\n", addr, addr + size, p);
@@ -192,7 +217,7 @@ int main(void)
 		return 1;
 	}
 
-	addr = BASE_ADDRESS;
+	addr = base_addr;
 	size = 5 * page_size;
 	if (munmap((void *)addr, size) != 0) {
 		dump_maps();
-- 
2.34.1

[PATCH 5.10 48/71] selftests/memfd: clean up mapping in mfd_fail_write

[Greg Kroah-Hartman]

From: Mike Kravetz <mike.kravetz@oracle.com>

[ Upstream commit fda153c89af344d21df281009a9d046cf587ea0f ]

Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:

    memfd-hugetlb: CREATE
    memfd-hugetlb: BASIC
    memfd-hugetlb: SEAL-WRITE
    memfd-hugetlb: SEAL-FUTURE-WRITE
    memfd-hugetlb: SEAL-SHRINK
    fallocate(ALLOC) failed: No space left on device
    ./run_hugetlbfs_test.sh: line 60: 166855 Aborted                 (core dumped) ./memfd_test hugetlbfs
    opening: ./mnt/memfd
    fuse: DONE

If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test.  In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap.  As a
result, two hugetlb pages remain reserved for the mapping.  When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.

Fix by making sure to unmap in mfd_fail_write.

Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/memfd/memfd_test.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/memfd/memfd_test.c b/tools/testing/selftests/memfd/memfd_test.c
index 334a7eea2004..fba322d1c67a 100644
--- a/tools/testing/selftests/memfd/memfd_test.c
+++ b/tools/testing/selftests/memfd/memfd_test.c
@@ -455,6 +455,7 @@ static void mfd_fail_write(int fd)
 			printf("mmap()+mprotect() didn't fail as expected\n");
 			abort();
 		}
+		munmap(p, mfd_def_size);
 	}
 
 	/* verify PUNCH_HOLE fails */
-- 
2.34.1

[PATCH 5.10 49/71] ARM: Spectre-BHB: provide empty stub for non-config

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit 68453767131a5deec1e8f9ac92a9042f929e585d upstream.

When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.

Fixes this build error:

  arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
  proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
  arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/include/asm/spectre.h |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/arch/arm/include/asm/spectre.h
+++ b/arch/arm/include/asm/spectre.h
@@ -25,7 +25,13 @@ enum {
 	SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8),
 };
 
+#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES
 void spectre_v2_update_state(unsigned int state, unsigned int methods);
+#else
+static inline void spectre_v2_update_state(unsigned int state,
+					   unsigned int methods)
+{}
+#endif
 
 int spectre_bhb_update_vectors(unsigned int method);
 

[PATCH 5.10 50/71] fuse: fix pipe buffer lifetime for direct_io

[Greg Kroah-Hartman]

From: Miklos Szeredi <mszeredi@redhat.com>

commit 0c4bcfdecb1ac0967619ee7ff44871d93c08c909 upstream.

In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls
fuse_direct_write_iter(), which normally calls fuse_direct_io(), which then
imports the write buffer with fuse_get_user_pages(), which uses
iov_iter_get_pages() to grab references to userspace pages instead of
actually copying memory.

On the filesystem device side, these pages can then either be read to
userspace (via fuse_dev_read()), or splice()d over into a pipe using
fuse_dev_splice_read() as pipe buffers with &nosteal_pipe_buf_ops.

This is wrong because after fuse_dev_do_read() unlocks the FUSE request,
the userspace filesystem can mark the request as completed, causing write()
to return. At that point, the userspace filesystem should no longer have
access to the pipe buffer.

Fix by copying pages coming from the user address space to new pipe
buffers.

Reported-by: Jann Horn <jannh@google.com>
Fixes: c3021629a0d8 ("fuse: support splice() reading from fuse device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/fuse/dev.c    |   12 +++++++++++-
 fs/fuse/file.c   |    1 +
 fs/fuse/fuse_i.h |    1 +
 3 files changed, 13 insertions(+), 1 deletion(-)

--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -945,7 +945,17 @@ static int fuse_copy_page(struct fuse_co
 
 	while (count) {
 		if (cs->write && cs->pipebufs && page) {
-			return fuse_ref_page(cs, page, offset, count);
+			/*
+			 * Can't control lifetime of pipe buffers, so always
+			 * copy user pages.
+			 */
+			if (cs->req->args->user_pages) {
+				err = fuse_copy_fill(cs);
+				if (err)
+					return err;
+			} else {
+				return fuse_ref_page(cs, page, offset, count);
+			}
 		} else if (!cs->len) {
 			if (cs->move_pages && page &&
 			    offset == 0 && count == PAGE_SIZE) {
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1418,6 +1418,7 @@ static int fuse_get_user_pages(struct fu
 			(PAGE_SIZE - ret) & (PAGE_SIZE - 1);
 	}
 
+	ap->args.user_pages = true;
 	if (write)
 		ap->args.in_pages = true;
 	else
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -263,6 +263,7 @@ struct fuse_args {
 	bool nocreds:1;
 	bool in_pages:1;
 	bool out_pages:1;
+	bool user_pages:1;
 	bool out_argvar:1;
 	bool page_zeroing:1;
 	bool page_replace:1;

[PATCH 5.10 51/71] staging: rtl8723bs: Fix access-point mode deadlock

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit 8f4347081be32e67b0873827e0138ab0fdaaf450 upstream.

Commit 54659ca026e5 ("staging: rtl8723bs: remove possible deadlock when
disconnect (v2)") split the locking of pxmitpriv->lock vs sleep_q/lock
into 2 locks in attempt to fix a lockdep reported issue with the locking
order of the sta_hash_lock vs pxmitpriv->lock.

But in the end this turned out to not fully solve the sta_hash_lock issue
so commit a7ac783c338b ("staging: rtl8723bs: remove a second possible
deadlock") was added to fix this in another way.

The original fix was kept as it was still seen as a good thing to have,
but now it turns out that it creates a deadlock in access-point mode:

[Feb20 23:47] ======================================================
[  +0.074085] WARNING: possible circular locking dependency detected
[  +0.074077] 5.16.0-1-amd64 #1 Tainted: G         C  E
[  +0.064710] ------------------------------------------------------
[  +0.074075] ksoftirqd/3/29 is trying to acquire lock:
[  +0.060542] ffffb8b30062ab00 (&pxmitpriv->lock){+.-.}-{2:2}, at: rtw_xmit_classifier+0x8a/0x140 [r8723bs]
[  +0.114921]
              but task is already holding lock:
[  +0.069908] ffffb8b3007ab704 (&psta->sleep_q.lock){+.-.}-{2:2}, at: wakeup_sta_to_xmit+0x3b/0x300 [r8723bs]
[  +0.116976]
              which lock already depends on the new lock.

[  +0.098037]
              the existing dependency chain (in reverse order) is:
[  +0.089704]
              -> #1 (&psta->sleep_q.lock){+.-.}-{2:2}:
[  +0.077232]        _raw_spin_lock_bh+0x34/0x40
[  +0.053261]        xmitframe_enqueue_for_sleeping_sta+0xc1/0x2f0 [r8723bs]
[  +0.082572]        rtw_xmit+0x58b/0x940 [r8723bs]
[  +0.056528]        _rtw_xmit_entry+0xba/0x350 [r8723bs]
[  +0.062755]        dev_hard_start_xmit+0xf1/0x320
[  +0.056381]        sch_direct_xmit+0x9e/0x360
[  +0.052212]        __dev_queue_xmit+0xce4/0x1080
[  +0.055334]        ip6_finish_output2+0x18f/0x6e0
[  +0.056378]        ndisc_send_skb+0x2c8/0x870
[  +0.052209]        ndisc_send_ns+0xd3/0x210
[  +0.050130]        addrconf_dad_work+0x3df/0x5a0
[  +0.055338]        process_one_work+0x274/0x5a0
[  +0.054296]        worker_thread+0x52/0x3b0
[  +0.050124]        kthread+0x16c/0x1a0
[  +0.044925]        ret_from_fork+0x1f/0x30
[  +0.049092]
              -> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[  +0.074101]        __lock_acquire+0x10f5/0x1d80
[  +0.054298]        lock_acquire+0xd7/0x300
[  +0.049088]        _raw_spin_lock_bh+0x34/0x40
[  +0.053248]        rtw_xmit_classifier+0x8a/0x140 [r8723bs]
[  +0.066949]        rtw_xmitframe_enqueue+0xa/0x20 [r8723bs]
[  +0.066946]        rtl8723bs_hal_xmitframe_enqueue+0x14/0x50 [r8723bs]
[  +0.078386]        wakeup_sta_to_xmit+0xa6/0x300 [r8723bs]
[  +0.065903]        rtw_recv_entry+0xe36/0x1160 [r8723bs]
[  +0.063809]        rtl8723bs_recv_tasklet+0x349/0x6c0 [r8723bs]
[  +0.071093]        tasklet_action_common.constprop.0+0xe5/0x110
[  +0.070966]        __do_softirq+0x16f/0x50a
[  +0.050134]        __irq_exit_rcu+0xeb/0x140
[  +0.051172]        irq_exit_rcu+0xa/0x20
[  +0.047006]        common_interrupt+0xb8/0xd0
[  +0.052214]        asm_common_interrupt+0x1e/0x40
[  +0.056381]        finish_task_switch.isra.0+0x100/0x3a0
[  +0.063670]        __schedule+0x3ad/0xd20
[  +0.048047]        schedule+0x4e/0xc0
[  +0.043880]        smpboot_thread_fn+0xc4/0x220
[  +0.054298]        kthread+0x16c/0x1a0
[  +0.044922]        ret_from_fork+0x1f/0x30
[  +0.049088]
              other info that might help us debug this:

[  +0.095950]  Possible unsafe locking scenario:

[  +0.070952]        CPU0                    CPU1
[  +0.054282]        ----                    ----
[  +0.054285]   lock(&psta->sleep_q.lock);
[  +0.047004]                                lock(&pxmitpriv->lock);
[  +0.074082]                                lock(&psta->sleep_q.lock);
[  +0.077209]   lock(&pxmitpriv->lock);
[  +0.043873]
               *** DEADLOCK ***

[  +0.070950] 1 lock held by ksoftirqd/3/29:
[  +0.049082]  #0: ffffb8b3007ab704 (&psta->sleep_q.lock){+.-.}-{2:2}, at: wakeup_sta_to_xmit+0x3b/0x300 [r8723bs]

Analysis shows that in hindsight the splitting of the lock was not
a good idea, so revert this to fix the access-point mode deadlock.

Note this is a straight-forward revert done with git revert, the commented
out "/* spin_lock_bh(&psta_bmc->sleep_q.lock); */" lines were part of the
code before the reverted changes.

Fixes: 54659ca026e5 ("staging: rtl8723bs: remove possible deadlock when disconnect (v2)")
Cc: stable <stable@vger.kernel.org>
Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215542
Link: https://lore.kernel.org/r/20220302101637.26542-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8723bs/core/rtw_mlme_ext.c  |    7 +++++--
 drivers/staging/rtl8723bs/core/rtw_recv.c      |   10 +++++++---
 drivers/staging/rtl8723bs/core/rtw_sta_mgt.c   |   22 ++++++++++------------
 drivers/staging/rtl8723bs/core/rtw_xmit.c      |   16 +++++++++-------
 drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c |    2 ++
 5 files changed, 33 insertions(+), 24 deletions(-)

--- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
@@ -6679,6 +6679,7 @@ u8 chk_bmc_sleepq_hdl(struct adapter *pa
 	struct sta_info *psta_bmc;
 	struct list_head	*xmitframe_plist, *xmitframe_phead;
 	struct xmit_frame *pxmitframe = NULL;
+	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
 	struct sta_priv  *pstapriv = &padapter->stapriv;
 
 	/* for BC/MC Frames */
@@ -6689,7 +6690,8 @@ u8 chk_bmc_sleepq_hdl(struct adapter *pa
 	if ((pstapriv->tim_bitmap&BIT(0)) && (psta_bmc->sleepq_len > 0)) {
 		msleep(10);/*  10ms, ATIM(HIQ) Windows */
 
-		spin_lock_bh(&psta_bmc->sleep_q.lock);
+		/* spin_lock_bh(&psta_bmc->sleep_q.lock); */
+		spin_lock_bh(&pxmitpriv->lock);
 
 		xmitframe_phead = get_list_head(&psta_bmc->sleep_q);
 		xmitframe_plist = get_next(xmitframe_phead);
@@ -6715,7 +6717,8 @@ u8 chk_bmc_sleepq_hdl(struct adapter *pa
 			rtw_hal_xmitframe_enqueue(padapter, pxmitframe);
 		}
 
-		spin_unlock_bh(&psta_bmc->sleep_q.lock);
+		/* spin_unlock_bh(&psta_bmc->sleep_q.lock); */
+		spin_unlock_bh(&pxmitpriv->lock);
 
 		/* check hi queue and bmc_sleepq */
 		rtw_chk_hi_queue_cmd(padapter);
--- a/drivers/staging/rtl8723bs/core/rtw_recv.c
+++ b/drivers/staging/rtl8723bs/core/rtw_recv.c
@@ -1144,8 +1144,10 @@ sint validate_recv_ctrl_frame(struct ada
 		if ((psta->state&WIFI_SLEEP_STATE) && (pstapriv->sta_dz_bitmap&BIT(psta->aid))) {
 			struct list_head	*xmitframe_plist, *xmitframe_phead;
 			struct xmit_frame *pxmitframe = NULL;
+			struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
 
-			spin_lock_bh(&psta->sleep_q.lock);
+			/* spin_lock_bh(&psta->sleep_q.lock); */
+			spin_lock_bh(&pxmitpriv->lock);
 
 			xmitframe_phead = get_list_head(&psta->sleep_q);
 			xmitframe_plist = get_next(xmitframe_phead);
@@ -1180,10 +1182,12 @@ sint validate_recv_ctrl_frame(struct ada
 					update_beacon(padapter, _TIM_IE_, NULL, true);
 				}
 
-				spin_unlock_bh(&psta->sleep_q.lock);
+				/* spin_unlock_bh(&psta->sleep_q.lock); */
+				spin_unlock_bh(&pxmitpriv->lock);
 
 			} else {
-				spin_unlock_bh(&psta->sleep_q.lock);
+				/* spin_unlock_bh(&psta->sleep_q.lock); */
+				spin_unlock_bh(&pxmitpriv->lock);
 
 				/* DBG_871X("no buffered packets to xmit\n"); */
 				if (pstapriv->tim_bitmap&BIT(psta->aid)) {
--- a/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
+++ b/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
@@ -330,48 +330,46 @@ u32 rtw_free_stainfo(struct adapter *pad
 
 	/* list_del_init(&psta->wakeup_list); */
 
-	spin_lock_bh(&psta->sleep_q.lock);
+	spin_lock_bh(&pxmitpriv->lock);
+
 	rtw_free_xmitframe_queue(pxmitpriv, &psta->sleep_q);
 	psta->sleepq_len = 0;
-	spin_unlock_bh(&psta->sleep_q.lock);
-
-	spin_lock_bh(&pxmitpriv->lock);
 
 	/* vo */
-	spin_lock_bh(&pstaxmitpriv->vo_q.sta_pending.lock);
+	/* spin_lock_bh(&(pxmitpriv->vo_pending.lock)); */
 	rtw_free_xmitframe_queue(pxmitpriv, &pstaxmitpriv->vo_q.sta_pending);
 	list_del_init(&(pstaxmitpriv->vo_q.tx_pending));
 	phwxmit = pxmitpriv->hwxmits;
 	phwxmit->accnt -= pstaxmitpriv->vo_q.qcnt;
 	pstaxmitpriv->vo_q.qcnt = 0;
-	spin_unlock_bh(&pstaxmitpriv->vo_q.sta_pending.lock);
+	/* spin_unlock_bh(&(pxmitpriv->vo_pending.lock)); */
 
 	/* vi */
-	spin_lock_bh(&pstaxmitpriv->vi_q.sta_pending.lock);
+	/* spin_lock_bh(&(pxmitpriv->vi_pending.lock)); */
 	rtw_free_xmitframe_queue(pxmitpriv, &pstaxmitpriv->vi_q.sta_pending);
 	list_del_init(&(pstaxmitpriv->vi_q.tx_pending));
 	phwxmit = pxmitpriv->hwxmits+1;
 	phwxmit->accnt -= pstaxmitpriv->vi_q.qcnt;
 	pstaxmitpriv->vi_q.qcnt = 0;
-	spin_unlock_bh(&pstaxmitpriv->vi_q.sta_pending.lock);
+	/* spin_unlock_bh(&(pxmitpriv->vi_pending.lock)); */
 
 	/* be */
-	spin_lock_bh(&pstaxmitpriv->be_q.sta_pending.lock);
+	/* spin_lock_bh(&(pxmitpriv->be_pending.lock)); */
 	rtw_free_xmitframe_queue(pxmitpriv, &pstaxmitpriv->be_q.sta_pending);
 	list_del_init(&(pstaxmitpriv->be_q.tx_pending));
 	phwxmit = pxmitpriv->hwxmits+2;
 	phwxmit->accnt -= pstaxmitpriv->be_q.qcnt;
 	pstaxmitpriv->be_q.qcnt = 0;
-	spin_unlock_bh(&pstaxmitpriv->be_q.sta_pending.lock);
+	/* spin_unlock_bh(&(pxmitpriv->be_pending.lock)); */
 
 	/* bk */
-	spin_lock_bh(&pstaxmitpriv->bk_q.sta_pending.lock);
+	/* spin_lock_bh(&(pxmitpriv->bk_pending.lock)); */
 	rtw_free_xmitframe_queue(pxmitpriv, &pstaxmitpriv->bk_q.sta_pending);
 	list_del_init(&(pstaxmitpriv->bk_q.tx_pending));
 	phwxmit = pxmitpriv->hwxmits+3;
 	phwxmit->accnt -= pstaxmitpriv->bk_q.qcnt;
 	pstaxmitpriv->bk_q.qcnt = 0;
-	spin_unlock_bh(&pstaxmitpriv->bk_q.sta_pending.lock);
+	/* spin_unlock_bh(&(pxmitpriv->bk_pending.lock)); */
 
 	spin_unlock_bh(&pxmitpriv->lock);
 
--- a/drivers/staging/rtl8723bs/core/rtw_xmit.c
+++ b/drivers/staging/rtl8723bs/core/rtw_xmit.c
@@ -1871,6 +1871,8 @@ void rtw_free_xmitframe_queue(struct xmi
 	struct list_head	*plist, *phead;
 	struct	xmit_frame	*pxmitframe;
 
+	spin_lock_bh(&pframequeue->lock);
+
 	phead = get_list_head(pframequeue);
 	plist = get_next(phead);
 
@@ -1881,6 +1883,7 @@ void rtw_free_xmitframe_queue(struct xmi
 
 		rtw_free_xmitframe(pxmitpriv, pxmitframe);
 	}
+	spin_unlock_bh(&pframequeue->lock);
 }
 
 s32 rtw_xmitframe_enqueue(struct adapter *padapter, struct xmit_frame *pxmitframe)
@@ -1943,7 +1946,6 @@ s32 rtw_xmit_classifier(struct adapter *
 	struct sta_info *psta;
 	struct tx_servq	*ptxservq;
 	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
-	struct xmit_priv *xmit_priv = &padapter->xmitpriv;
 	struct hw_xmit	*phwxmits =  padapter->xmitpriv.hwxmits;
 	sint res = _SUCCESS;
 
@@ -1972,14 +1974,12 @@ s32 rtw_xmit_classifier(struct adapter *
 
 	ptxservq = rtw_get_sta_pending(padapter, psta, pattrib->priority, (u8 *)(&ac_index));
 
-	spin_lock_bh(&xmit_priv->lock);
 	if (list_empty(&ptxservq->tx_pending))
 		list_add_tail(&ptxservq->tx_pending, get_list_head(phwxmits[ac_index].sta_queue));
 
 	list_add_tail(&pxmitframe->list, get_list_head(&ptxservq->sta_pending));
 	ptxservq->qcnt++;
 	phwxmits[ac_index].accnt++;
-	spin_unlock_bh(&xmit_priv->lock);
 
 exit:
 
@@ -2397,10 +2397,11 @@ void wakeup_sta_to_xmit(struct adapter *
 	struct list_head	*xmitframe_plist, *xmitframe_phead;
 	struct xmit_frame *pxmitframe = NULL;
 	struct sta_priv *pstapriv = &padapter->stapriv;
+	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
 
 	psta_bmc = rtw_get_bcmc_stainfo(padapter);
 
-	spin_lock_bh(&psta->sleep_q.lock);
+	spin_lock_bh(&pxmitpriv->lock);
 
 	xmitframe_phead = get_list_head(&psta->sleep_q);
 	xmitframe_plist = get_next(xmitframe_phead);
@@ -2508,7 +2509,7 @@ void wakeup_sta_to_xmit(struct adapter *
 
 _exit:
 
-	spin_unlock_bh(&psta->sleep_q.lock);
+	spin_unlock_bh(&pxmitpriv->lock);
 
 	if (update_mask)
 		update_beacon(padapter, _TIM_IE_, NULL, true);
@@ -2520,8 +2521,9 @@ void xmit_delivery_enabled_frames(struct
 	struct list_head	*xmitframe_plist, *xmitframe_phead;
 	struct xmit_frame *pxmitframe = NULL;
 	struct sta_priv *pstapriv = &padapter->stapriv;
+	struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
 
-	spin_lock_bh(&psta->sleep_q.lock);
+	spin_lock_bh(&pxmitpriv->lock);
 
 	xmitframe_phead = get_list_head(&psta->sleep_q);
 	xmitframe_plist = get_next(xmitframe_phead);
@@ -2577,7 +2579,7 @@ void xmit_delivery_enabled_frames(struct
 		}
 	}
 
-	spin_unlock_bh(&psta->sleep_q.lock);
+	spin_unlock_bh(&pxmitpriv->lock);
 }
 
 void enqueue_pending_xmitbuf(
--- a/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c
@@ -572,7 +572,9 @@ s32 rtl8723bs_hal_xmit(
 			rtw_issue_addbareq_cmd(padapter, pxmitframe);
 	}
 
+	spin_lock_bh(&pxmitpriv->lock);
 	err = rtw_xmitframe_enqueue(padapter, pxmitframe);
+	spin_unlock_bh(&pxmitpriv->lock);
 	if (err != _SUCCESS) {
 		RT_TRACE(_module_hal_xmit_c_, _drv_err_, ("rtl8723bs_hal_xmit: enqueue xmitframe fail\n"));
 		rtw_free_xmitframe(pxmitpriv, pxmitframe);

[PATCH 5.10 52/71] staging: gdm724x: fix use after free in gdm_lte_rx()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit fc7f750dc9d102c1ed7bbe4591f991e770c99033 upstream.

The netif_rx_ni() function frees the skb so we can't dereference it to
save the skb->len.

Fixes: 61e121047645 ("staging: gdm7240: adding LTE USB driver")
Cc: stable <stable@vger.kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220228074331.GA13685@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/gdm724x/gdm_lte.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/staging/gdm724x/gdm_lte.c
+++ b/drivers/staging/gdm724x/gdm_lte.c
@@ -76,14 +76,15 @@ static void tx_complete(void *arg)
 
 static int gdm_lte_rx(struct sk_buff *skb, struct nic *nic, int nic_type)
 {
-	int ret;
+	int ret, len;
 
+	len = skb->len + ETH_HLEN;
 	ret = netif_rx_ni(skb);
 	if (ret == NET_RX_DROP) {
 		nic->stats.rx_dropped++;
 	} else {
 		nic->stats.rx_packets++;
-		nic->stats.rx_bytes += skb->len + ETH_HLEN;
+		nic->stats.rx_bytes += len;
 	}
 
 	return 0;

[PATCH 5.10 53/71] net: macb: Fix lost RX packet wakeup race in NAPI receive

[Greg Kroah-Hartman]

From: Robert Hancock <robert.hancock@calian.com>

commit 0bf476fc3624e3a72af4ba7340d430a91c18cd67 upstream.

There is an oddity in the way the RSR register flags propagate to the
ISR register (and the actual interrupt output) on this hardware: it
appears that RSR register bits only result in ISR being asserted if the
interrupt was actually enabled at the time, so enabling interrupts with
RSR bits already set doesn't trigger an interrupt to be raised. There
was already a partial fix for this race in the macb_poll function where
it checked for RSR bits being set and re-triggered NAPI receive.
However, there was a still a race window between checking RSR and
actually enabling interrupts, where a lost wakeup could happen. It's
necessary to check again after enabling interrupts to see if RSR was set
just prior to the interrupt being enabled, and re-trigger receive in that
case.

This issue was noticed in a point-to-point UDP request-response protocol
which periodically saw timeouts or abnormally high response times due to
received packets not being processed in a timely fashion. In many
applications, more packets arriving, including TCP retransmissions, would
cause the original packet to be processed, thus masking the issue.

Fixes: 02f7a34f34e3 ("net: macb: Re-enable RX interrupt only when RX is done")
Cc: stable@vger.kernel.org
Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/cadence/macb_main.c |   25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -1448,7 +1448,14 @@ static int macb_poll(struct napi_struct
 	if (work_done < budget) {
 		napi_complete_done(napi, work_done);
 
-		/* Packets received while interrupts were disabled */
+		/* RSR bits only seem to propagate to raise interrupts when
+		 * interrupts are enabled at the time, so if bits are already
+		 * set due to packets received while interrupts were disabled,
+		 * they will not cause another interrupt to be generated when
+		 * interrupts are re-enabled.
+		 * Check for this case here. This has been seen to happen
+		 * around 30% of the time under heavy network load.
+		 */
 		status = macb_readl(bp, RSR);
 		if (status) {
 			if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
@@ -1456,6 +1463,22 @@ static int macb_poll(struct napi_struct
 			napi_reschedule(napi);
 		} else {
 			queue_writel(queue, IER, bp->rx_intr_mask);
+
+			/* In rare cases, packets could have been received in
+			 * the window between the check above and re-enabling
+			 * interrupts. Therefore, a double-check is required
+			 * to avoid losing a wakeup. This can potentially race
+			 * with the interrupt handler doing the same actions
+			 * if an interrupt is raised just after enabling them,
+			 * but this should be harmless.
+			 */
+			status = macb_readl(bp, RSR);
+			if (unlikely(status)) {
+				queue_writel(queue, IDR, bp->rx_intr_mask);
+				if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
+					queue_writel(queue, ISR, MACB_BIT(RCOMP));
+				napi_schedule(napi);
+			}
 		}
 	}
 

[PATCH 5.10 54/71] mmc: meson: Fix usage of meson_mmc_post_req()

[Greg Kroah-Hartman]

From: Rong Chen <rong.chen@amlogic.com>

commit f0d2f15362f02444c5d7ffd5a5eb03e4aa54b685 upstream.

Currently meson_mmc_post_req() is called in meson_mmc_request() right
after meson_mmc_start_cmd(). This could lead to DMA unmapping before the request
is actually finished.

To fix, don't call meson_mmc_post_req() until meson_mmc_request_done().

Signed-off-by: Rong Chen <rong.chen@amlogic.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220216124239.4007667-1-rong.chen@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/meson-gx-mmc.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -173,6 +173,8 @@ struct meson_host {
 	int irq;
 
 	bool vqmmc_enabled;
+	bool needs_pre_post_req;
+
 };
 
 #define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
@@ -652,6 +654,8 @@ static void meson_mmc_request_done(struc
 	struct meson_host *host = mmc_priv(mmc);
 
 	host->cmd = NULL;
+	if (host->needs_pre_post_req)
+		meson_mmc_post_req(mmc, mrq, 0);
 	mmc_request_done(host->mmc, mrq);
 }
 
@@ -869,7 +873,7 @@ static int meson_mmc_validate_dram_acces
 static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 {
 	struct meson_host *host = mmc_priv(mmc);
-	bool needs_pre_post_req = mrq->data &&
+	host->needs_pre_post_req = mrq->data &&
 			!(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
 
 	/*
@@ -885,22 +889,19 @@ static void meson_mmc_request(struct mmc
 		}
 	}
 
-	if (needs_pre_post_req) {
+	if (host->needs_pre_post_req) {
 		meson_mmc_get_transfer_mode(mmc, mrq);
 		if (!meson_mmc_desc_chain_mode(mrq->data))
-			needs_pre_post_req = false;
+			host->needs_pre_post_req = false;
 	}
 
-	if (needs_pre_post_req)
+	if (host->needs_pre_post_req)
 		meson_mmc_pre_req(mmc, mrq);
 
 	/* Stop execution */
 	writel(0, host->regs + SD_EMMC_START);
 
 	meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd);
-
-	if (needs_pre_post_req)
-		meson_mmc_post_req(mmc, mrq, 0);
 }
 
 static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)

[PATCH 5.10 55/71] riscv: Fix auipc+jalr relocation range checks

[Greg Kroah-Hartman]

From: Emil Renner Berthing <kernel@esmil.dk>

commit 0966d385830de3470b7131db8e86c0c5bc9c52dc upstream.

RISC-V can do PC-relative jumps with a 32bit range using the following
two instructions:

	auipc	t0, imm20	; t0 = PC + imm20 * 2^12
	jalr	ra, t0, imm12	; ra = PC + 4, PC = t0 + imm12

Crucially both the 20bit immediate imm20 and the 12bit immediate imm12
are treated as two's-complement signed values. For this reason the
immediates are usually calculated like this:

	imm20 = (offset + 0x800) >> 12
	imm12 = offset & 0xfff

..where offset is the signed offset from the auipc instruction. When
the 11th bit of offset is 0 the addition of 0x800 doesn't change the top
20 bits and imm12 considered positive. When the 11th bit is 1 the carry
of the addition by 0x800 means imm20 is one higher, but since imm12 is
then considered negative the two's complement representation means it
all cancels out nicely.

However, this addition by 0x800 (2^11) means an offset greater than or
equal to 2^31 - 2^11 would overflow so imm20 is considered negative and
result in a backwards jump. Similarly the lower range of offset is also
moved down by 2^11 and hence the true 32bit range is

	[-2^31 - 2^11, 2^31 - 2^11)

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/kernel/module.c |   21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

--- a/arch/riscv/kernel/module.c
+++ b/arch/riscv/kernel/module.c
@@ -13,6 +13,19 @@
 #include <linux/pgtable.h>
 #include <asm/sections.h>
 
+/*
+ * The auipc+jalr instruction pair can reach any PC-relative offset
+ * in the range [-2^31 - 2^11, 2^31 - 2^11)
+ */
+static bool riscv_insn_valid_32bit_offset(ptrdiff_t val)
+{
+#ifdef CONFIG_32BIT
+	return true;
+#else
+	return (-(1L << 31) - (1L << 11)) <= val && val < ((1L << 31) - (1L << 11));
+#endif
+}
+
 static int apply_r_riscv_32_rela(struct module *me, u32 *location, Elf_Addr v)
 {
 	if (v != (u32)v) {
@@ -95,7 +108,7 @@ static int apply_r_riscv_pcrel_hi20_rela
 	ptrdiff_t offset = (void *)v - (void *)location;
 	s32 hi20;
 
-	if (offset != (s32)offset) {
+	if (!riscv_insn_valid_32bit_offset(offset)) {
 		pr_err(
 		  "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n",
 		  me->name, (long long)v, location);
@@ -197,10 +210,9 @@ static int apply_r_riscv_call_plt_rela(s
 				       Elf_Addr v)
 {
 	ptrdiff_t offset = (void *)v - (void *)location;
-	s32 fill_v = offset;
 	u32 hi20, lo12;
 
-	if (offset != fill_v) {
+	if (!riscv_insn_valid_32bit_offset(offset)) {
 		/* Only emit the plt entry if offset over 32-bit range */
 		if (IS_ENABLED(CONFIG_MODULE_SECTIONS)) {
 			offset = module_emit_plt_entry(me, v);
@@ -224,10 +236,9 @@ static int apply_r_riscv_call_rela(struc
 				   Elf_Addr v)
 {
 	ptrdiff_t offset = (void *)v - (void *)location;
-	s32 fill_v = offset;
 	u32 hi20, lo12;
 
-	if (offset != fill_v) {
+	if (!riscv_insn_valid_32bit_offset(offset)) {
 		pr_err(
 		  "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n",
 		  me->name, (long long)v, location);

[PATCH 5.10 56/71] arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

commit a1cc1697bb56cdf880ad4d17b79a39ef2c294bc9 upstream.

Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.

Since commit 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from
'ranges' DT property") kernel can set different PCIe address on CPU and
different on the bus for the one A37xx address mapping without any firmware
support in case the bus address does not conflict with other A37xx mapping.

So remap I/O space to the bus address 0x0 to enable support for old legacy
I/O port based cards which have hardcoded I/O ports in low address space.

Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O
space can be set to address 0x0 too because MEM space and I/O space are
separate and so do not conflict.

Remapping IO space on Turris Mox to different address is not possible to
due bootloader bug.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Cc: stable@vger.kernel.org # 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property")
Cc: stable@vger.kernel.org # 514ef1e62d65 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts |    7 ++++++-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi           |    2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -138,7 +138,9 @@
 	/*
 	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
 	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
-	 * 2 size cells and also expects that the second range starts at 16 MB offset. If these
+	 * 2 size cells and also expects that the second range starts at 16 MB offset. Also it
+	 * expects that first range uses same address for PCI (child) and CPU (parent) cells (so
+	 * no remapping) and that this address is the lowest from all specified ranges. If these
 	 * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
 	 * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window
 	 * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB.
@@ -147,6 +149,9 @@
 	 * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
 	 * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
 	 * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
+	 * Bug related to requirement of same child and parent addresses for first range is fixed
+	 * in U-Boot version 2022.04 by following commit:
+	 * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17
 	 */
 	#address-cells = <3>;
 	#size-cells = <2>;
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -495,7 +495,7 @@
 			 * (totaling 127 MiB) for MEM.
 			 */
 			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
-				  0x81000000 0 0xefff0000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
+				  0x81000000 0 0x00000000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc 0>,
 					<0 0 0 2 &pcie_intc 1>,

[PATCH 5.10 57/71] virtio: unexport virtio_finalize_features

[Greg Kroah-Hartman]

From: Michael S. Tsirkin <mst@redhat.com>

commit 838d6d3461db0fdbf33fc5f8a69c27b50b4a46da upstream.

virtio_finalize_features is only used internally within virtio.
No reason to export it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/virtio/virtio.c |    3 +--
 include/linux/virtio.h  |    1 -
 2 files changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -167,7 +167,7 @@ void virtio_add_status(struct virtio_dev
 }
 EXPORT_SYMBOL_GPL(virtio_add_status);
 
-int virtio_finalize_features(struct virtio_device *dev)
+static int virtio_finalize_features(struct virtio_device *dev)
 {
 	int ret = dev->config->finalize_features(dev);
 	unsigned status;
@@ -203,7 +203,6 @@ int virtio_finalize_features(struct virt
 	}
 	return 0;
 }
-EXPORT_SYMBOL_GPL(virtio_finalize_features);
 
 static int virtio_dev_probe(struct device *_d)
 {
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -135,7 +135,6 @@ void virtio_break_device(struct virtio_d
 void virtio_config_changed(struct virtio_device *dev);
 void virtio_config_disable(struct virtio_device *dev);
 void virtio_config_enable(struct virtio_device *dev);
-int virtio_finalize_features(struct virtio_device *dev);
 #ifdef CONFIG_PM_SLEEP
 int virtio_device_freeze(struct virtio_device *dev);
 int virtio_device_restore(struct virtio_device *dev);

[PATCH 5.10 58/71] virtio: acknowledge all features before access

[Greg Kroah-Hartman]

From: Michael S. Tsirkin <mst@redhat.com>

commit 4fa59ede95195f267101a1b8916992cf3f245cdb upstream.

The feature negotiation was designed in a way that
makes it possible for devices to know which config
fields will be accessed by drivers.

This is broken since commit 404123c2db79 ("virtio: allow drivers to
validate features") with fallout in at least block and net.  We have a
partial work-around in commit 2f9a174f918e ("virtio: write back
F_VERSION_1 before validate") which at least lets devices find out which
format should config space have, but this is a partial fix: guests
should not access config space without acknowledging features since
otherwise we'll never be able to change the config space format.

To fix, split finalize_features from virtio_finalize_features and
call finalize_features with all feature bits before validation,
and then - if validation changed any bits - once again after.

Since virtio_finalize_features no longer writes out features
rename it to virtio_features_ok - since that is what it does:
checks that features are ok with the device.

As a side effect, this also reduces the amount of hypervisor accesses -
we now only acknowledge features once unless we are clearing any
features when validating (which is uncommon).

IRC I think that this was more or less always the intent in the spec but
unfortunately the way the spec is worded does not say this explicitly, I
plan to address this at the spec level, too.

Acked-by: Jason Wang <jasowang@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 404123c2db79 ("virtio: allow drivers to validate features")
Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate")
Cc: "Halil Pasic" <pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/virtio/virtio.c       |   39 ++++++++++++++++++++++-----------------
 include/linux/virtio_config.h |    3 ++-
 2 files changed, 24 insertions(+), 18 deletions(-)

--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -167,14 +167,13 @@ void virtio_add_status(struct virtio_dev
 }
 EXPORT_SYMBOL_GPL(virtio_add_status);
 
-static int virtio_finalize_features(struct virtio_device *dev)
+/* Do some validation, then set FEATURES_OK */
+static int virtio_features_ok(struct virtio_device *dev)
 {
-	int ret = dev->config->finalize_features(dev);
 	unsigned status;
+	int ret;
 
 	might_sleep();
-	if (ret)
-		return ret;
 
 	ret = arch_has_restricted_virtio_memory_access();
 	if (ret) {
@@ -239,17 +238,6 @@ static int virtio_dev_probe(struct devic
 		driver_features_legacy = driver_features;
 	}
 
-	/*
-	 * Some devices detect legacy solely via F_VERSION_1. Write
-	 * F_VERSION_1 to force LE config space accesses before FEATURES_OK for
-	 * these when needed.
-	 */
-	if (drv->validate && !virtio_legacy_is_little_endian()
-			  && device_features & BIT_ULL(VIRTIO_F_VERSION_1)) {
-		dev->features = BIT_ULL(VIRTIO_F_VERSION_1);
-		dev->config->finalize_features(dev);
-	}
-
 	if (device_features & (1ULL << VIRTIO_F_VERSION_1))
 		dev->features = driver_features & device_features;
 	else
@@ -260,13 +248,26 @@ static int virtio_dev_probe(struct devic
 		if (device_features & (1ULL << i))
 			__virtio_set_bit(dev, i);
 
+	err = dev->config->finalize_features(dev);
+	if (err)
+		goto err;
+
 	if (drv->validate) {
+		u64 features = dev->features;
+
 		err = drv->validate(dev);
 		if (err)
 			goto err;
+
+		/* Did validation change any features? Then write them again. */
+		if (features != dev->features) {
+			err = dev->config->finalize_features(dev);
+			if (err)
+				goto err;
+		}
 	}
 
-	err = virtio_finalize_features(dev);
+	err = virtio_features_ok(dev);
 	if (err)
 		goto err;
 
@@ -437,7 +438,11 @@ int virtio_device_restore(struct virtio_
 	/* We have a driver! */
 	virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER);
 
-	ret = virtio_finalize_features(dev);
+	ret = dev->config->finalize_features(dev);
+	if (ret)
+		goto err;
+
+	ret = virtio_features_ok(dev);
 	if (ret)
 		goto err;
 
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -62,8 +62,9 @@ struct virtio_shm_region {
  *	Returns the first 64 feature bits (all we currently need).
  * @finalize_features: confirm what device features we'll be using.
  *	vdev: the virtio_device
- *	This gives the final feature bits for the device: it can change
+ *	This sends the driver feature bits to the device: it can change
  *	the dev->feature bits if it wants.
+ * Note: despite the name this can be called any number of times.
  *	Returns 0 on success or error status
  * @bus_name: return the bus name associated with the device (optional)
  *	vdev: the virtio_device

[PATCH 5.10 59/71] watch_queue, pipe: Free watchqueue state after clearing pipe ring

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit db8facfc9fafacefe8a835416a6b77c838088f8b upstream.

In free_pipe_info(), free the watchqueue state after clearing the pipe
ring as each pipe ring descriptor has a release function, and in the
case of a notification message, this is watch_queue_pipe_buf_release()
which tries to mark the allocation bitmap that was previously released.

Fix this by moving the put of the pipe's ref on the watch queue to after
the ring has been cleared.  We still need to call watch_queue_clear()
before doing that to make sure that the pipe is disconnected from any
notification sources first.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/pipe.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -830,10 +830,8 @@ void free_pipe_info(struct pipe_inode_in
 	int i;
 
 #ifdef CONFIG_WATCH_QUEUE
-	if (pipe->watch_queue) {
+	if (pipe->watch_queue)
 		watch_queue_clear(pipe->watch_queue);
-		put_watch_queue(pipe->watch_queue);
-	}
 #endif
 
 	(void) account_pipe_buffers(pipe->user, pipe->nr_accounted, 0);
@@ -843,6 +841,10 @@ void free_pipe_info(struct pipe_inode_in
 		if (buf->ops)
 			pipe_buf_release(pipe, buf);
 	}
+#ifdef CONFIG_WATCH_QUEUE
+	if (pipe->watch_queue)
+		put_watch_queue(pipe->watch_queue);
+#endif
 	if (pipe->tmp_page)
 		__free_page(pipe->tmp_page);
 	kfree(pipe->bufs);

[PATCH 5.10 60/71] watch_queue: Fix to release page in ->release()

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit c1853fbadcba1497f4907971e7107888e0714c81 upstream.

When a pipe ring descriptor points to a notification message, the
refcount on the backing page is incremented by the generic get function,
but the release function, which marks the bitmap, doesn't drop the page
ref.

Fix this by calling generic_pipe_buf_release() at the end of
watch_queue_pipe_buf_release().

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/watch_queue.c |    1 +
 1 file changed, 1 insertion(+)

--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -54,6 +54,7 @@ static void watch_queue_pipe_buf_release
 	bit += page->index;
 
 	set_bit(bit, wqueue->notes_bitmap);
+	generic_pipe_buf_release(pipe, buf);
 }
 
 // No try_steal function => no stealing

[PATCH 5.10 61/71] watch_queue: Fix to always request a pow-of-2 pipe ring size

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit 96a4d8912b28451cd62825fd7caa0e66e091d938 upstream.

The pipe ring size must always be a power of 2 as the head and tail
pointers are masked off by AND'ing with the size of the ring - 1.
watch_queue_set_size(), however, lets you specify any number of notes
between 1 and 511.  This number is passed through to pipe_resize_ring()
without checking/forcing its alignment.

Fix this by rounding the number of slots required up to the nearest
power of two.  The request is meant to guarantee that at least that many
notifications can be generated before the queue is full, so rounding
down isn't an option, but, alternatively, it may be better to give an
error if we aren't allowed to allocate that much ring space.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/watch_queue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -244,7 +244,7 @@ long watch_queue_set_size(struct pipe_in
 		goto error;
 	}
 
-	ret = pipe_resize_ring(pipe, nr_notes);
+	ret = pipe_resize_ring(pipe, roundup_pow_of_two(nr_notes));
 	if (ret < 0)
 		goto error;
 

[PATCH 5.10 62/71] watch_queue: Fix the alloc bitmap size to reflect notes allocated

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit 3b4c0371928c17af03e8397ac842346624017ce6 upstream.

Currently, watch_queue_set_size() sets the number of notes available in
wqueue->nr_notes according to the number of notes allocated, but sets
the size of the bitmap to the unrounded number of notes originally asked
for.

Fix this by setting the bitmap size to the number of notes we're
actually going to make available (ie. the number allocated).

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/watch_queue.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -244,6 +244,7 @@ long watch_queue_set_size(struct pipe_in
 		goto error;
 	}
 
+	nr_notes = nr_pages * WATCH_QUEUE_NOTES_PER_PAGE;
 	ret = pipe_resize_ring(pipe, roundup_pow_of_two(nr_notes));
 	if (ret < 0)
 		goto error;
@@ -269,7 +270,7 @@ long watch_queue_set_size(struct pipe_in
 	wqueue->notes = pages;
 	wqueue->notes_bitmap = bitmap;
 	wqueue->nr_pages = nr_pages;
-	wqueue->nr_notes = nr_pages * WATCH_QUEUE_NOTES_PER_PAGE;
+	wqueue->nr_notes = nr_notes;
 	return 0;
 
 error_p:

[PATCH 5.10 63/71] watch_queue: Free the alloc bitmap when the watch_queue is torn down

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit 7ea1a0124b6da246b5bc8c66cddaafd36acf3ecb upstream.

Free the watch_queue note allocation bitmap when the watch_queue is
destroyed.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/watch_queue.c |    1 +
 1 file changed, 1 insertion(+)

--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -373,6 +373,7 @@ static void __put_watch_queue(struct kre
 
 	for (i = 0; i < wqueue->nr_pages; i++)
 		__free_page(wqueue->notes[i]);
+	bitmap_free(wqueue->notes_bitmap);
 
 	wfilter = rcu_access_pointer(wqueue->filter);
 	if (wfilter)

[PATCH 5.10 64/71] watch_queue: Fix lack of barrier/sync/lock between post and read

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit 2ed147f015af2b48f41c6f0b6746aa9ea85c19f3 upstream.

There's nothing to synchronise post_one_notification() versus
pipe_read().  Whilst posting is done under pipe->rd_wait.lock, the
reader only takes pipe->mutex which cannot bar notification posting as
that may need to be made from contexts that cannot sleep.

Fix this by setting pipe->head with a barrier in post_one_notification()
and reading pipe->head with a barrier in pipe_read().

If that's not sufficient, the rd_wait.lock will need to be taken,
possibly in a ->confirm() op so that it only applies to notifications.
The lock would, however, have to be dropped before copy_page_to_iter()
is invoked.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/pipe.c            |    3 ++-
 kernel/watch_queue.c |    2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -252,7 +252,8 @@ pipe_read(struct kiocb *iocb, struct iov
 	 */
 	was_full = pipe_full(pipe->head, pipe->tail, pipe->max_usage);
 	for (;;) {
-		unsigned int head = pipe->head;
+		/* Read ->head with a barrier vs post_one_notification() */
+		unsigned int head = smp_load_acquire(&pipe->head);
 		unsigned int tail = pipe->tail;
 		unsigned int mask = pipe->ring_size - 1;
 
--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -113,7 +113,7 @@ static bool post_one_notification(struct
 	buf->offset = offset;
 	buf->len = len;
 	buf->flags = PIPE_BUF_FLAG_WHOLE;
-	pipe->head = head + 1;
+	smp_store_release(&pipe->head, head + 1); /* vs pipe_read() */
 
 	if (!test_and_clear_bit(note, wqueue->notes_bitmap)) {
 		spin_unlock_irq(&pipe->rd_wait.lock);

[PATCH 5.10 65/71] watch_queue: Make comment about setting ->defunct more accurate

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit 4edc0760412b0c4ecefc7e02cb855b310b122825 upstream.

watch_queue_clear() has a comment stating that setting ->defunct to true
preventing new additions as well as preventing notifications.  Whilst
the latter is true, the first bit is superfluous since at the time this
function is called, the pipe cannot be accessed to add new event
sources.

Remove the "new additions" bit from the comment.

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/watch_queue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -569,7 +569,7 @@ void watch_queue_clear(struct watch_queu
 	rcu_read_lock();
 	spin_lock_bh(&wqueue->lock);
 
-	/* Prevent new additions and prevent notifications from happening */
+	/* Prevent new notifications from being stored. */
 	wqueue->defunct = true;
 
 	while (!hlist_empty(&wqueue->watches)) {

[PATCH 5.10 66/71] x86/boot: Fix memremap of setup_indirect structures

[Greg Kroah-Hartman]

From: Ross Philipson <ross.philipson@oracle.com>

commit 7228918b34615ef6317edcd9a058a057bc54aa32 upstream.

As documented, the setup_indirect structure is nested inside
the setup_data structures in the setup_data list. The code currently
accesses the fields inside the setup_indirect structure but only
the sizeof(struct setup_data) is being memremapped. No crash
occurred but this is just due to how the area is remapped under the
covers.

Properly memremap both the setup_data and setup_indirect structures
in these cases before accessing them.

Fixes: b3c72fc9a78e ("x86/boot: Introduce setup_indirect")
Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1645668456-22036-2-git-send-email-ross.philipson@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/e820.c     |   41 +++++++++++++++++------
 arch/x86/kernel/kdebugfs.c |   35 +++++++++++++++-----
 arch/x86/kernel/ksysfs.c   |   77 +++++++++++++++++++++++++++++++++++----------
 arch/x86/kernel/setup.c    |   34 +++++++++++++++----
 arch/x86/mm/ioremap.c      |   24 +++++++++++---
 5 files changed, 165 insertions(+), 46 deletions(-)

--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -995,8 +995,10 @@ early_param("memmap", parse_memmap_opt);
  */
 void __init e820__reserve_setup_data(void)
 {
+	struct setup_indirect *indirect;
 	struct setup_data *data;
-	u64 pa_data;
+	u64 pa_data, pa_next;
+	u32 len;
 
 	pa_data = boot_params.hdr.setup_data;
 	if (!pa_data)
@@ -1004,6 +1006,14 @@ void __init e820__reserve_setup_data(voi
 
 	while (pa_data) {
 		data = early_memremap(pa_data, sizeof(*data));
+		if (!data) {
+			pr_warn("e820: failed to memremap setup_data entry\n");
+			return;
+		}
+
+		len = sizeof(*data);
+		pa_next = data->next;
+
 		e820__range_update(pa_data, sizeof(*data)+data->len, E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
 
 		/*
@@ -1015,18 +1025,27 @@ void __init e820__reserve_setup_data(voi
 						 sizeof(*data) + data->len,
 						 E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
 
-		if (data->type == SETUP_INDIRECT &&
-		    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT) {
-			e820__range_update(((struct setup_indirect *)data->data)->addr,
-					   ((struct setup_indirect *)data->data)->len,
-					   E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
-			e820__range_update_kexec(((struct setup_indirect *)data->data)->addr,
-						 ((struct setup_indirect *)data->data)->len,
-						 E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
+		if (data->type == SETUP_INDIRECT) {
+			len += data->len;
+			early_memunmap(data, sizeof(*data));
+			data = early_memremap(pa_data, len);
+			if (!data) {
+				pr_warn("e820: failed to memremap indirect setup_data\n");
+				return;
+			}
+
+			indirect = (struct setup_indirect *)data->data;
+
+			if (indirect->type != SETUP_INDIRECT) {
+				e820__range_update(indirect->addr, indirect->len,
+						   E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
+				e820__range_update_kexec(indirect->addr, indirect->len,
+							 E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
+			}
 		}
 
-		pa_data = data->next;
-		early_memunmap(data, sizeof(*data));
+		pa_data = pa_next;
+		early_memunmap(data, len);
 	}
 
 	e820__update_table(e820_table);
--- a/arch/x86/kernel/kdebugfs.c
+++ b/arch/x86/kernel/kdebugfs.c
@@ -88,11 +88,13 @@ create_setup_data_node(struct dentry *pa
 
 static int __init create_setup_data_nodes(struct dentry *parent)
 {
+	struct setup_indirect *indirect;
 	struct setup_data_node *node;
 	struct setup_data *data;
-	int error;
+	u64 pa_data, pa_next;
 	struct dentry *d;
-	u64 pa_data;
+	int error;
+	u32 len;
 	int no = 0;
 
 	d = debugfs_create_dir("setup_data", parent);
@@ -112,12 +114,29 @@ static int __init create_setup_data_node
 			error = -ENOMEM;
 			goto err_dir;
 		}
+		pa_next = data->next;
 
-		if (data->type == SETUP_INDIRECT &&
-		    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT) {
-			node->paddr = ((struct setup_indirect *)data->data)->addr;
-			node->type  = ((struct setup_indirect *)data->data)->type;
-			node->len   = ((struct setup_indirect *)data->data)->len;
+		if (data->type == SETUP_INDIRECT) {
+			len = sizeof(*data) + data->len;
+			memunmap(data);
+			data = memremap(pa_data, len, MEMREMAP_WB);
+			if (!data) {
+				kfree(node);
+				error = -ENOMEM;
+				goto err_dir;
+			}
+
+			indirect = (struct setup_indirect *)data->data;
+
+			if (indirect->type != SETUP_INDIRECT) {
+				node->paddr = indirect->addr;
+				node->type  = indirect->type;
+				node->len   = indirect->len;
+			} else {
+				node->paddr = pa_data;
+				node->type  = data->type;
+				node->len   = data->len;
+			}
 		} else {
 			node->paddr = pa_data;
 			node->type  = data->type;
@@ -125,7 +144,7 @@ static int __init create_setup_data_node
 		}
 
 		create_setup_data_node(d, no, node);
-		pa_data = data->next;
+		pa_data = pa_next;
 
 		memunmap(data);
 		no++;
--- a/arch/x86/kernel/ksysfs.c
+++ b/arch/x86/kernel/ksysfs.c
@@ -91,26 +91,41 @@ static int get_setup_data_paddr(int nr,
 
 static int __init get_setup_data_size(int nr, size_t *size)
 {
-	int i = 0;
+	u64 pa_data = boot_params.hdr.setup_data, pa_next;
+	struct setup_indirect *indirect;
 	struct setup_data *data;
-	u64 pa_data = boot_params.hdr.setup_data;
+	int i = 0;
+	u32 len;
 
 	while (pa_data) {
 		data = memremap(pa_data, sizeof(*data), MEMREMAP_WB);
 		if (!data)
 			return -ENOMEM;
+		pa_next = data->next;
+
 		if (nr == i) {
-			if (data->type == SETUP_INDIRECT &&
-			    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT)
-				*size = ((struct setup_indirect *)data->data)->len;
-			else
+			if (data->type == SETUP_INDIRECT) {
+				len = sizeof(*data) + data->len;
+				memunmap(data);
+				data = memremap(pa_data, len, MEMREMAP_WB);
+				if (!data)
+					return -ENOMEM;
+
+				indirect = (struct setup_indirect *)data->data;
+
+				if (indirect->type != SETUP_INDIRECT)
+					*size = indirect->len;
+				else
+					*size = data->len;
+			} else {
 				*size = data->len;
+			}
 
 			memunmap(data);
 			return 0;
 		}
 
-		pa_data = data->next;
+		pa_data = pa_next;
 		memunmap(data);
 		i++;
 	}
@@ -120,9 +135,11 @@ static int __init get_setup_data_size(in
 static ssize_t type_show(struct kobject *kobj,
 			 struct kobj_attribute *attr, char *buf)
 {
+	struct setup_indirect *indirect;
+	struct setup_data *data;
 	int nr, ret;
 	u64 paddr;
-	struct setup_data *data;
+	u32 len;
 
 	ret = kobj_to_setup_data_nr(kobj, &nr);
 	if (ret)
@@ -135,10 +152,20 @@ static ssize_t type_show(struct kobject
 	if (!data)
 		return -ENOMEM;
 
-	if (data->type == SETUP_INDIRECT)
-		ret = sprintf(buf, "0x%x\n", ((struct setup_indirect *)data->data)->type);
-	else
+	if (data->type == SETUP_INDIRECT) {
+		len = sizeof(*data) + data->len;
+		memunmap(data);
+		data = memremap(paddr, len, MEMREMAP_WB);
+		if (!data)
+			return -ENOMEM;
+
+		indirect = (struct setup_indirect *)data->data;
+
+		ret = sprintf(buf, "0x%x\n", indirect->type);
+	} else {
 		ret = sprintf(buf, "0x%x\n", data->type);
+	}
+
 	memunmap(data);
 	return ret;
 }
@@ -149,9 +176,10 @@ static ssize_t setup_data_data_read(stru
 				    char *buf,
 				    loff_t off, size_t count)
 {
+	struct setup_indirect *indirect;
+	struct setup_data *data;
 	int nr, ret = 0;
 	u64 paddr, len;
-	struct setup_data *data;
 	void *p;
 
 	ret = kobj_to_setup_data_nr(kobj, &nr);
@@ -165,10 +193,27 @@ static ssize_t setup_data_data_read(stru
 	if (!data)
 		return -ENOMEM;
 
-	if (data->type == SETUP_INDIRECT &&
-	    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT) {
-		paddr = ((struct setup_indirect *)data->data)->addr;
-		len = ((struct setup_indirect *)data->data)->len;
+	if (data->type == SETUP_INDIRECT) {
+		len = sizeof(*data) + data->len;
+		memunmap(data);
+		data = memremap(paddr, len, MEMREMAP_WB);
+		if (!data)
+			return -ENOMEM;
+
+		indirect = (struct setup_indirect *)data->data;
+
+		if (indirect->type != SETUP_INDIRECT) {
+			paddr = indirect->addr;
+			len = indirect->len;
+		} else {
+			/*
+			 * Even though this is technically undefined, return
+			 * the data as though it is a normal setup_data struct.
+			 * This will at least allow it to be inspected.
+			 */
+			paddr += sizeof(*data);
+			len = data->len;
+		}
 	} else {
 		paddr += sizeof(*data);
 		len = data->len;
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -371,21 +371,41 @@ static void __init parse_setup_data(void
 
 static void __init memblock_x86_reserve_range_setup_data(void)
 {
+	struct setup_indirect *indirect;
 	struct setup_data *data;
-	u64 pa_data;
+	u64 pa_data, pa_next;
+	u32 len;
 
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
 		data = early_memremap(pa_data, sizeof(*data));
+		if (!data) {
+			pr_warn("setup: failed to memremap setup_data entry\n");
+			return;
+		}
+
+		len = sizeof(*data);
+		pa_next = data->next;
+
 		memblock_reserve(pa_data, sizeof(*data) + data->len);
 
-		if (data->type == SETUP_INDIRECT &&
-		    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT)
-			memblock_reserve(((struct setup_indirect *)data->data)->addr,
-					 ((struct setup_indirect *)data->data)->len);
+		if (data->type == SETUP_INDIRECT) {
+			len += data->len;
+			early_memunmap(data, sizeof(*data));
+			data = early_memremap(pa_data, len);
+			if (!data) {
+				pr_warn("setup: failed to memremap indirect setup_data\n");
+				return;
+			}
+
+			indirect = (struct setup_indirect *)data->data;
+
+			if (indirect->type != SETUP_INDIRECT)
+				memblock_reserve(indirect->addr, indirect->len);
+		}
 
-		pa_data = data->next;
-		early_memunmap(data, sizeof(*data));
+		pa_data = pa_next;
+		early_memunmap(data, len);
 	}
 }
 
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -633,6 +633,7 @@ static bool memremap_is_efi_data(resourc
 static bool memremap_is_setup_data(resource_size_t phys_addr,
 				   unsigned long size)
 {
+	struct setup_indirect *indirect;
 	struct setup_data *data;
 	u64 paddr, paddr_next;
 
@@ -645,6 +646,10 @@ static bool memremap_is_setup_data(resou
 
 		data = memremap(paddr, sizeof(*data),
 				MEMREMAP_WB | MEMREMAP_DEC);
+		if (!data) {
+			pr_warn("failed to memremap setup_data entry\n");
+			return false;
+		}
 
 		paddr_next = data->next;
 		len = data->len;
@@ -654,10 +659,21 @@ static bool memremap_is_setup_data(resou
 			return true;
 		}
 
-		if (data->type == SETUP_INDIRECT &&
-		    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT) {
-			paddr = ((struct setup_indirect *)data->data)->addr;
-			len = ((struct setup_indirect *)data->data)->len;
+		if (data->type == SETUP_INDIRECT) {
+			memunmap(data);
+			data = memremap(paddr, sizeof(*data) + len,
+					MEMREMAP_WB | MEMREMAP_DEC);
+			if (!data) {
+				pr_warn("failed to memremap indirect setup_data\n");
+				return false;
+			}
+
+			indirect = (struct setup_indirect *)data->data;
+
+			if (indirect->type != SETUP_INDIRECT) {
+				paddr = indirect->addr;
+				len = indirect->len;
+			}
 		}
 
 		memunmap(data);

[PATCH 5.10 67/71] x86/boot: Add setup_indirect support in early_memremap_is_setup_data()

[Greg Kroah-Hartman]

From: Ross Philipson <ross.philipson@oracle.com>

commit 445c1470b6ef96440e7cfc42dfc160f5004fd149 upstream.

The x86 boot documentation describes the setup_indirect structures and
how they are used. Only one of the two functions in ioremap.c that needed
to be modified to be aware of the introduction of setup_indirect
functionality was updated. Adds comparable support to the other function
where it was missing.

Fixes: b3c72fc9a78e ("x86/boot: Introduce setup_indirect")
Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1645668456-22036-3-git-send-email-ross.philipson@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/mm/ioremap.c |   33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -694,22 +694,51 @@ static bool memremap_is_setup_data(resou
 static bool __init early_memremap_is_setup_data(resource_size_t phys_addr,
 						unsigned long size)
 {
+	struct setup_indirect *indirect;
 	struct setup_data *data;
 	u64 paddr, paddr_next;
 
 	paddr = boot_params.hdr.setup_data;
 	while (paddr) {
-		unsigned int len;
+		unsigned int len, size;
 
 		if (phys_addr == paddr)
 			return true;
 
 		data = early_memremap_decrypted(paddr, sizeof(*data));
+		if (!data) {
+			pr_warn("failed to early memremap setup_data entry\n");
+			return false;
+		}
+
+		size = sizeof(*data);
 
 		paddr_next = data->next;
 		len = data->len;
 
-		early_memunmap(data, sizeof(*data));
+		if ((phys_addr > paddr) && (phys_addr < (paddr + len))) {
+			early_memunmap(data, sizeof(*data));
+			return true;
+		}
+
+		if (data->type == SETUP_INDIRECT) {
+			size += len;
+			early_memunmap(data, sizeof(*data));
+			data = early_memremap_decrypted(paddr, size);
+			if (!data) {
+				pr_warn("failed to early memremap indirect setup_data\n");
+				return false;
+			}
+
+			indirect = (struct setup_indirect *)data->data;
+
+			if (indirect->type != SETUP_INDIRECT) {
+				paddr = indirect->addr;
+				len = indirect->len;
+			}
+		}
+
+		early_memunmap(data, size);
 
 		if ((phys_addr > paddr) && (phys_addr < (paddr + len)))
 			return true;

[PATCH 5.10 68/71] x86/traps: Mark do_int3() NOKPROBE_SYMBOL

[Greg Kroah-Hartman]

From: Li Huafei <lihuafei1@huawei.com>

commit a365a65f9ca1ceb9cf1ac29db4a4f51df7c507ad upstream.

Since kprobe_int3_handler() is called in do_int3(), probing do_int3()
can cause a breakpoint recursion and crash the kernel. Therefore,
do_int3() should be marked as NOKPROBE_SYMBOL.

Fixes: 21e28290b317 ("x86/traps: Split int3 handler up")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220310120915.63349-1-lihuafei1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/traps.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -651,6 +651,7 @@ static bool do_int3(struct pt_regs *regs
 
 	return res == NOTIFY_STOP;
 }
+NOKPROBE_SYMBOL(do_int3);
 
 static void do_int3_user(struct pt_regs *regs)
 {

[PATCH 5.10 69/71] ext4: add check to prevent attempting to resize an fs with sparse_super2

[Greg Kroah-Hartman]

From: Josh Triplett <josh@joshtriplett.org>

commit b1489186cc8391e0c1e342f9fbc3eedf6b944c61 upstream.

The in-kernel ext4 resize code doesn't support filesystem with the
sparse_super2 feature. It fails with errors like this and doesn't finish
the resize:
EXT4-fs (loop0): resizing filesystem from 16640 to 7864320 blocks
EXT4-fs warning (device loop0): verify_reserved_gdb:760: reserved GDT 2 missing grp 1 (32770)
EXT4-fs warning (device loop0): ext4_resize_fs:2111: error (-22) occurred during file system resize
EXT4-fs (loop0): resized filesystem to 2097152

To reproduce:
mkfs.ext4 -b 4096 -I 256 -J size=32 -E resize=$((256*1024*1024)) -O sparse_super2 ext4.img 65M
truncate -s 30G ext4.img
mount ext4.img /mnt
python3 -c 'import fcntl, os, struct ; fd = os.open("/mnt", os.O_RDONLY | os.O_DIRECTORY) ; fcntl.ioctl(fd, 0x40086610, struct.pack("Q", 30 * 1024 * 1024 * 1024 // 4096), False) ; os.close(fd)'
dmesg | tail
e2fsck ext4.img

The userspace resize2fs tool has a check for this case: it checks if the
filesystem has sparse_super2 set and if the kernel provides
/sys/fs/ext4/features/sparse_super2. However, the former check requires
manually reading and parsing the filesystem superblock.

Detect this case in ext4_resize_begin and error out early with a clear
error message.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/74b8ae78405270211943cd7393e65586c5faeed1.1623093259.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/resize.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -74,6 +74,11 @@ int ext4_resize_begin(struct super_block
 		return -EPERM;
 	}
 
+	if (ext4_has_feature_sparse_super2(sb)) {
+		ext4_msg(sb, KERN_ERR, "Online resizing not supported with sparse_super2");
+		return -EOPNOTSUPP;
+	}
+
 	if (test_and_set_bit_lock(EXT4_FLAGS_RESIZING,
 				  &EXT4_SB(sb)->s_ext4_flags))
 		ret = -EBUSY;

[PATCH 5.10 70/71] ARM: fix Thumb2 regression with Spectre BHB

[Greg Kroah-Hartman]

From: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

commit 6c7cb60bff7aec24b834343ff433125f469886a3 upstream.

When building for Thumb2, the vectors make use of a local label. Sadly,
the Spectre BHB code also uses a local label with the same number which
results in the Thumb2 reference pointing at the wrong place. Fix this
by changing the number used for the Spectre BHB local label.

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/kernel/entry-armv.S |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1043,9 +1043,9 @@ vector_bhb_loop8_\name:
 
 	@ bhb workaround
 	mov	r0, #8
-1:	b	. + 4
+3:	b	. + 4
 	subs	r0, r0, #1
-	bne	1b
+	bne	3b
 	dsb
 	isb
 	b	2b

[PATCH 5.10 71/71] watch_queue: Fix filter limit check

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit c993ee0f9f81caf5767a50d1faeba39a0dc82af2 upstream.

In watch_queue_set_filter(), there are a couple of places where we check
that the filter type value does not exceed what the type_filter bitmap
can hold.  One place calculates the number of bits by:

   if (tf[i].type >= sizeof(wfilter->type_filter) * 8)

which is fine, but the second does:

   if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG)

which is not.  This can lead to a couple of out-of-bounds writes due to
a too-large type:

 (1) __set_bit() on wfilter->type_filter
 (2) Writing more elements in wfilter->filters[] than we allocated.

Fix this by just using the proper WATCH_TYPE__NR instead, which is the
number of types we actually know about.

The bug may cause an oops looking something like:

  BUG: KASAN: slab-out-of-bounds in watch_queue_set_filter+0x659/0x740
  Write of size 4 at addr ffff88800d2c66bc by task watch_queue_oob/611
  ...
  Call Trace:
   <TASK>
   dump_stack_lvl+0x45/0x59
   print_address_description.constprop.0+0x1f/0x150
   ...
   kasan_report.cold+0x7f/0x11b
   ...
   watch_queue_set_filter+0x659/0x740
   ...
   __x64_sys_ioctl+0x127/0x190
   do_syscall_64+0x43/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae

  Allocated by task 611:
   kasan_save_stack+0x1e/0x40
   __kasan_kmalloc+0x81/0xa0
   watch_queue_set_filter+0x23a/0x740
   __x64_sys_ioctl+0x127/0x190
   do_syscall_64+0x43/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae

  The buggy address belongs to the object at ffff88800d2c66a0
   which belongs to the cache kmalloc-32 of size 32
  The buggy address is located 28 bytes inside of
   32-byte region [ffff88800d2c66a0, ffff88800d2c66c0)

Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/watch_queue.h |    3 ++-
 kernel/watch_queue.c        |    4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

--- a/include/linux/watch_queue.h
+++ b/include/linux/watch_queue.h
@@ -28,7 +28,8 @@ struct watch_type_filter {
 struct watch_filter {
 	union {
 		struct rcu_head	rcu;
-		unsigned long	type_filter[2];	/* Bitmask of accepted types */
+		/* Bitmask of accepted types */
+		DECLARE_BITMAP(type_filter, WATCH_TYPE__NR);
 	};
 	u32			nr_filters;	/* Number of filters */
 	struct watch_type_filter filters[];
--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -322,7 +322,7 @@ long watch_queue_set_filter(struct pipe_
 		    tf[i].info_mask & WATCH_INFO_LENGTH)
 			goto err_filter;
 		/* Ignore any unknown types */
-		if (tf[i].type >= sizeof(wfilter->type_filter) * 8)
+		if (tf[i].type >= WATCH_TYPE__NR)
 			continue;
 		nr_filter++;
 	}
@@ -338,7 +338,7 @@ long watch_queue_set_filter(struct pipe_
 
 	q = wfilter->filters;
 	for (i = 0; i < filter.nr_filters; i++) {
-		if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG)
+		if (tf[i].type >= WATCH_TYPE__NR)
 			continue;
 
 		q->type			= tf[i].type;

Re: [PATCH 5.10 00/71] 5.10.106-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 661 bytes --]

Hi!

> This is the start of the stable review cycle for the 5.10.106 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

RE: [PATCH 5.10 00/71] 5.10.106-rc1 review

[Fox Chen]

On Mon, 14 Mar 2022 12:52:53 +0100, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.10.106 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Mar 2022 11:27:22 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.106-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.10.106-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.10 00/71] 5.10.106-rc1 review

[Florian Fainelli]

On 3/14/22 4:52 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.106 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Mar 2022 11:27:22 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.106-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.10 00/71] 5.10.106-rc1 review

[Guenter Roeck]

On Mon, Mar 14, 2022 at 12:52:53PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.106 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Mar 2022 11:27:22 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 161 pass: 161 fail: 0
Qemu test results:
	total: 477 pass: 477 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.10 00/71] 5.10.106-rc1 review

[Samuel Zou]

On 2022/3/14 19:52, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.106 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Mar 2022 11:27:22 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.106-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.10.106-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.106-rc1
Commit: 1ef0e2b3149031c288a85198919cc1778754e515
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9013
passed: 9013
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9013
passed: 9013
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 5.10 00/71] 5.10.106-rc1 review

[Naresh Kamboju]

On Mon, 14 Mar 2022 at 17:31, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.106 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 16 Mar 2022 11:27:22 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.106-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.10.106-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.10.y
* git commit: 1ef0e2b3149031c288a85198919cc1778754e515
* git describe: v5.10.105-72-g1ef0e2b31490
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.105-72-g1ef0e2b31490

## Test Regressions (compared to v5.10.105)
No test regressions found.

## Metric Regressions (compared to v5.10.105)
No metric regressions found.

## Test Fixes (compared to v5.10.105)
No test fixes found.

## Metric Fixes (compared to v5.10.105)
No metric fixes found.

## Test result summary
total: 95856, pass: 82843, fail: 543, skip: 11705, xfail: 765

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 291 total, 291 passed, 0 failed
* arm64: 41 total, 41 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 40 total, 40 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 60 total, 46 passed, 14 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 41 total, 41 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.10 00/71] 5.10.106-rc1 review

[Bagas Sanjaya]

On 14/03/22 18.52, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.106 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully cross-compiled for arm64 (bcm2711_defconfig, gcc 10.2.0) and
powerpc (ps3_defconfig, gcc 11.2.0).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

Re: [PATCH 5.10 00/71] 5.10.106-rc1 review

[Jon Hunter]

On Mon, 14 Mar 2022 12:52:53 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.106 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Mar 2022 11:27:22 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.106-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    75 tests:	75 pass, 0 fail

Linux version:	5.10.106-rc1-g1ef0e2b31490
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.10 00/71] 5.10.106-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Mar 14, 2022 at 12:52:53PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.106 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 16 Mar 2022 11:27:22 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20220301): 63 configs -> no new failure
arm (gcc version 11.2.1 20220301): 105 configs -> no new failure
arm64 (gcc version 11.2.1 20220301): 3 configs -> no failure
x86_64 (gcc version 11.2.1 20220301): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]

[1]. https://openqa.qa.codethink.co.uk/tests/882
[2]. https://openqa.qa.codethink.co.uk/tests/885


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip