From: Nayna Jain <nayna-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
To: tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Cc: patrickc-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org,
linux-security-module-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-ima-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: [PATCH v2 2/4] tpm: define __wait_for_tpm_stat to specify variable polling sleep time
Date: Wed, 6 Sep 2017 08:56:37 -0400 [thread overview]
Message-ID: <20170906125643.5070-3-nayna@linux.vnet.ibm.com> (raw)
In-Reply-To: <20170906125643.5070-1-nayna-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
The existing wait_for_tpm_stat() checks the chip status before
sleeping for 5 msec in a polling loop. For some functions although
the status isn't ready immediately, the status returns extremely
quickly. Waiting for 5 msec causes an unnecessary delay. An
example is the send() call in the tpms_tis driver.
This patch defines __wait_for_tpm_stat(), allowing the caller
to specify the polling sleep timeout value within the loop.
The existing wait_for_tpm_stat() becomes a wrapper for this
function.
After this change, performance on a TPM 1.2 with an 8 byte
burstcount for 1000 extends improved from ~14sec to ~10sec.
Signed-off-by: Nayna Jain <nayna-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
Acked-by: Mimi Zohar <zohar-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
---
drivers/char/tpm/tpm-interface.c | 15 ++++++++++++---
drivers/char/tpm/tpm.h | 3 +++
drivers/char/tpm/tpm_tis_core.c | 11 ++++++-----
3 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index 1d6729be4cd6..b23d006243b7 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -1050,8 +1050,9 @@ static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
return false;
}
-int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
- wait_queue_head_t *queue, bool check_cancel)
+int __wait_for_tpm_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
+ unsigned int poll_sleep, wait_queue_head_t *queue,
+ bool check_cancel)
{
unsigned long stop;
long rc;
@@ -1085,7 +1086,7 @@ int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
}
} else {
do {
- tpm_msleep(TPM_TIMEOUT);
+ tpm_msleep(poll_sleep);
status = chip->ops->status(chip);
if ((status & mask) == mask)
return 0;
@@ -1093,6 +1094,14 @@ int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
}
return -ETIME;
}
+EXPORT_SYMBOL_GPL(__wait_for_tpm_stat);
+
+int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
+ wait_queue_head_t *queue, bool check_cancel)
+{
+ return __wait_for_tpm_stat(chip, mask, timeout, TPM_TIMEOUT,
+ queue, check_cancel);
+}
EXPORT_SYMBOL_GPL(wait_for_tpm_stat);
#define TPM_ORD_SAVESTATE 152
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 2d5466a72e40..eb2f8818eded 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -525,6 +525,9 @@ int tpm_do_selftest(struct tpm_chip *chip);
unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal);
int tpm_pm_suspend(struct device *dev);
int tpm_pm_resume(struct device *dev);
+int __wait_for_tpm_stat(struct tpm_chip *chip, u8 mask,
+ unsigned long timeout, unsigned int poll_sleep,
+ wait_queue_head_t *queue, bool check_cancel);
int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
wait_queue_head_t *queue, bool check_cancel);
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 6b9bf4c4d434..d1eab29cb447 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -268,8 +268,8 @@ static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
status = tpm_tis_status(chip);
if ((status & TPM_STS_COMMAND_READY) == 0) {
tpm_tis_ready(chip);
- if (wait_for_tpm_stat
- (chip, TPM_STS_COMMAND_READY, chip->timeout_b,
+ if (__wait_for_tpm_stat
+ (chip, TPM_STS_COMMAND_READY, chip->timeout_b, 1,
&priv->int_queue, false) < 0) {
rc = -ETIME;
goto out_err;
@@ -303,7 +303,8 @@ static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
if (ignore_burst_count)
continue;
- if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
+ if (__wait_for_tpm_stat(chip, TPM_STS_VALID,
+ chip->timeout_c, 1,
&priv->int_queue, false) < 0) {
rc = -ETIME;
goto out_err;
@@ -320,8 +321,8 @@ static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)
if (rc < 0)
goto out_err;
- if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
- &priv->int_queue, false) < 0) {
+ if (__wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
+ 1, &priv->int_queue, false) < 0) {
rc = -ETIME;
goto out_err;
}
--
2.13.3
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
next prev parent reply other threads:[~2017-09-06 12:56 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-06 12:56 [PATCH v2 0/4] additional TPM performance improvements Nayna Jain
2017-09-06 12:56 ` [PATCH v2 3/4] tpm: reduce tpm_msleep() time in get_burstcount() Nayna Jain
2017-09-13 1:00 ` Jarkko Sakkinen
2017-09-15 12:40 ` Nayna Jain
[not found] ` <20170906125643.5070-1-nayna-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2017-09-06 12:56 ` [PATCH v2 1/4] tpm: ignore burstcount to improve tpm_tis send() performance Nayna Jain
2017-09-06 16:12 ` Jason Gunthorpe
2017-09-13 18:52 ` [tpmdd-devel] " Ken Goldman
[not found] ` <3c418974-a4c7-518e-b218-f6373c10209e-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2017-09-13 19:01 ` Peter Huewe
2017-09-13 0:45 ` Jarkko Sakkinen
[not found] ` <20170912222010.ltm76m5vy2kupydi-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2017-09-13 18:39 ` Peter Huewe
2017-09-13 23:10 ` Jarkko Sakkinen
2017-09-15 12:29 ` Nayna Jain
2017-09-15 15:19 ` Jarkko Sakkinen
2017-09-06 12:56 ` Nayna Jain [this message]
2017-09-13 0:58 ` [PATCH v2 2/4] tpm: define __wait_for_tpm_stat to specify variable polling sleep time Jarkko Sakkinen
2017-09-15 12:37 ` Nayna Jain
2017-09-15 15:20 ` Jarkko Sakkinen
2017-09-06 12:56 ` [PATCH v2 4/4] tpm: use tpm_msleep() value as max delay Nayna Jain
2017-09-13 0:47 ` Jarkko Sakkinen
2017-09-14 9:25 ` Nayna Jain
2017-09-14 12:28 ` Jarkko Sakkinen
2017-09-06 12:56 ` [PATCH 2/4] tpm: define __wait_for_tpm_stat to specify variable polling sleep time Nayna Jain
2017-09-06 12:58 ` Nayna
2017-09-06 12:56 ` [PATCH 1/4] tpm: ignore burstcount to improve tpm_tis send() performance Nayna Jain
[not found] ` <20170906125643.5070-6-nayna-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2017-09-06 12:58 ` Nayna
2017-09-07 16:18 ` [PATCH v2 0/4] additional TPM performance improvements Jarkko Sakkinen
2017-09-11 15:20 ` [tpmdd-devel] " Alexander.Steffen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170906125643.5070-3-nayna@linux.vnet.ibm.com \
--to=nayna-23vcf4htsmix0ybbhkvfkdbpr1lh4cv8@public.gmane.org \
--cc=jarkko.sakkinen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org \
--cc=linux-ima-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-security-module-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=patrickc-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org \
--cc=tpmdd-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).