u-boot.lists.denx.de archive mirror
 help / color / mirror / Atom feed
From: Vyacheslav Bocharov <adeep@lexina.in>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: u-boot@lists.denx.de, u-boot-amlogic@groups.io
Subject: [PATCH v2 0/3] ARM: meson: add support for JetHub D1/H1
Date: Sun, 19 Sep 2021 18:52:13 +0300	[thread overview]
Message-ID: <20210919155216.4000369-1-adeep@lexina.in> (raw)

Add support for new home automation devices manufactured by JetHome.
Patches prepared for use with the "ARM: meson: Sync Amlogic DT from Linux 5.14" patch series by Neil Armstrong

JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features:
- DIN Rail Mounting case
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 512Mb/1GB DDR3
- 8/16GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Passive POE

JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features:
- Square plastic case
- Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1GB DDR3
- 8/16GB eMMC flash
- 2 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- MicroSD 2.x/3.x/4.x DS/HS cards.
- 1 x gpio LED
- ADC user Button
- DC source 5V microUSB with serial console

Changes from v1:
- fix BOOT_TARGET_DEVICES in jethub.h (patch 1/3)
- add lore URLs to description (patch 2/3)

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>

Vyacheslav Bocharov (3):
  ARM: amlogic: add JetHub common config header
  ARM: amlogic: add JetHub D1/H1 device support
  ARM: amlogic: add JetHub D1/H1 docs

 arch/arm/dts/Makefile                         |   2 +
 .../arm/dts/meson-axg-jethome-jethub-j100.dts | 361 ++++++++++++++++++
 .../meson-gxl-s905w-jethome-jethub-j80.dts    | 241 ++++++++++++
 board/amlogic/jethub-j80/MAINTAINERS          |   6 +
 board/amlogic/jethub-j80/Makefile             |   6 +
 board/amlogic/jethub-j80/jethub-j80.c         |  68 ++++
 configs/jethub_j100_defconfig                 |  55 +++
 configs/jethub_j80_defconfig                  |  63 +++
 doc/board/amlogic/index.rst                   | 128 ++++---
 doc/board/amlogic/jethub-j100.rst             | 108 ++++++
 doc/board/amlogic/jethub-j80.rst              |  97 +++++
 include/configs/jethub.h                      |  40 ++
 12 files changed, 1112 insertions(+), 63 deletions(-)
 create mode 100644 arch/arm/dts/meson-axg-jethome-jethub-j100.dts
 create mode 100644 arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts
 create mode 100644 board/amlogic/jethub-j80/MAINTAINERS
 create mode 100644 board/amlogic/jethub-j80/Makefile
 create mode 100644 board/amlogic/jethub-j80/jethub-j80.c
 create mode 100644 configs/jethub_j100_defconfig
 create mode 100644 configs/jethub_j80_defconfig
 create mode 100644 doc/board/amlogic/jethub-j100.rst
 create mode 100644 doc/board/amlogic/jethub-j80.rst
 create mode 100644 include/configs/jethub.h

-- 
2.30.2


             reply	other threads:[~2021-09-19 15:52 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-19 15:52 Vyacheslav Bocharov [this message]
2021-09-19 15:52 ` [PATCH v2 1/3] ARM: amlogic: add JetHub common config header Vyacheslav Bocharov
2021-09-19 15:52 ` [PATCH v2 2/3] ARM: amlogic: add JetHub D1/H1 device support Vyacheslav Bocharov
2021-09-20  6:43   ` Neil Armstrong
2021-09-20  7:06     ` Vyacheslav
2021-09-19 15:52 ` [PATCH v2 3/3] ARM: amlogic: add JetHub D1/H1 docs Vyacheslav Bocharov
2021-09-20  6:46   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210919155216.4000369-1-adeep@lexina.in \
    --to=adeep@lexina.in \
    --cc=narmstrong@baylibre.com \
    --cc=u-boot-amlogic@groups.io \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).