From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: u-boot@lists.denx.de, Joe Hershberger <joe.hershberger@ni.com>,
Ramon Fried <rfried.dev@gmail.com>,
Priyanka Jain <priyanka.jain@nxp.com>
Subject: [PATCH 0/9] Support the SJA1105 DSA switch on the NXP LS1021A-TSN board
Date: Tue, 28 Sep 2021 02:48:16 +0300 [thread overview]
Message-ID: <20210927234825.823582-1-vladimir.oltean@nxp.com> (raw)
The NXP LS1021A-TSN board (and many others) contains an automotive
Ethernet switch. Some boards only have Ethernet ports routed through the
switch, and it is therefore desirable to have TFTP functional.
These patches add support for the SJA1105 and SJA1110 switch family
(tested on first-gen SJA1105T, second-gen SJA1105S, but not on third-gen
SJA1110A yet, the support for that is blind). Along the way, fixes and
improvements to the DSA framework are also made.
I have not added documentation for the device tree bindings, the driver
is compatible with the device tree bindings from Linux, for which a
YAML schema-based validator exists.
Vladimir Oltean (9):
net: tsec: add support for promiscuous mode
include: import if_vlan.h from Linux
net: dsa: allow drivers to get the port OF node
net: introduce a helper to determine whether to use in-band autoneg
net: dsa: felix: configure the in-band autoneg property based on OF
node info
net: add driver for NXP SJA1105 DSA L2 switch
arm: dts: ls1021a-tsn: add sja1105 and eth2 bindings
configs: ls1021a-tsn: enable sja1105 switch driver
configs: ls1021a-tsn: enable the generation of random Ethernet MAC
addresses
arch/arm/dts/ls1021a-tsn.dts | 103 +
configs/ls1021atsn_qspi_defconfig | 3 +
configs/ls1021atsn_sdcard_defconfig | 3 +
drivers/core/of_extra.c | 12 +
drivers/net/Kconfig | 16 +
drivers/net/Makefile | 1 +
drivers/net/mscc_eswitch/felix_switch.c | 10 +-
drivers/net/sja1105.c | 3351 +++++++++++++++++++++++
drivers/net/tsec.c | 20 +-
include/dm/of_extra.h | 14 +
include/linux/if_vlan.h | 26 +
include/net/dsa.h | 12 +
include/tsec.h | 2 +
net/dsa-uclass.c | 20 +
14 files changed, 3583 insertions(+), 10 deletions(-)
create mode 100644 drivers/net/sja1105.c
create mode 100644 include/linux/if_vlan.h
--
2.25.1
next reply other threads:[~2021-09-27 23:49 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-27 23:48 Vladimir Oltean [this message]
2021-09-27 23:48 ` [PATCH 1/9] net: tsec: add support for promiscuous mode Vladimir Oltean
2021-09-28 13:34 ` Ramon Fried
2021-09-29 2:32 ` Bin Meng
2021-09-27 23:48 ` [PATCH 2/9] include: import if_vlan.h from Linux Vladimir Oltean
2021-09-28 13:26 ` Ramon Fried
2021-09-29 2:32 ` Bin Meng
2021-09-27 23:48 ` [PATCH 3/9] net: dsa: allow drivers to get the port OF node Vladimir Oltean
2021-09-28 13:34 ` Ramon Fried
2021-09-27 23:48 ` [PATCH 4/9] net: introduce a helper to determine whether to use in-band autoneg Vladimir Oltean
2021-09-28 13:34 ` Ramon Fried
2021-09-29 2:32 ` Bin Meng
2021-09-27 23:48 ` [PATCH 5/9] net: dsa: felix: configure the in-band autoneg property based on OF node info Vladimir Oltean
2021-09-28 13:34 ` Ramon Fried
2021-09-29 12:21 ` Vladimir Oltean
2021-09-27 23:48 ` [PATCH 6/9] net: add driver for NXP SJA1105 DSA L2 switch Vladimir Oltean
2021-09-28 13:35 ` Ramon Fried
2021-09-27 23:48 ` [PATCH 7/9] arm: dts: ls1021a-tsn: add sja1105 and eth2 bindings Vladimir Oltean
2021-09-28 13:26 ` Ramon Fried
2021-09-27 23:48 ` [PATCH 8/9] configs: ls1021a-tsn: enable sja1105 switch driver Vladimir Oltean
2021-09-28 13:26 ` Ramon Fried
2021-09-29 2:33 ` Bin Meng
2021-09-27 23:48 ` [PATCH 9/9] configs: ls1021a-tsn: enable the generation of random Ethernet MAC addresses Vladimir Oltean
2021-09-28 13:26 ` Ramon Fried
2021-09-29 2:33 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210927234825.823582-1-vladimir.oltean@nxp.com \
--to=vladimir.oltean@nxp.com \
--cc=joe.hershberger@ni.com \
--cc=priyanka.jain@nxp.com \
--cc=rfried.dev@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).