[PATCH 0/9] phyCORE-i.MX8MM Updates

[PATCH 0/9] phyCORE-i.MX8MM Updates

[Teresa Remmet]

This patchstack contains mainly cleanup for phyCORE-i.MX8MM but
also adds:
* SPI NOR flash support
* clk command
* binman support

Teresa

Teresa Remmet (9):
  board: phytec: phycore_imx8mm: Clean up spl
  include: configs: phycore_imx8mm: Remove hard coded network settings
  include: configs: phycore-imx8mm: Remove not needed defines
  include: configs: phycore-imx8mm: Do not use macro for address
  arm: dts: phycore-imx8mm-u-boot: Add wdog pinctrl entry
  arm: dts: phycore-imx8mm: Fix property
  board: phytec: phycore-imx8mm: Add SPI-NOR flash support
  configs: phycore-imx8mm_defconfig: Enable clk command
  board: phytec: imx8mm-phycore: Switch to binman

 arch/arm/dts/phycore-imx8mm-u-boot.dtsi       | 126 ++++++++++++++++++
 arch/arm/dts/phycore-imx8mm.dts               |  30 ++++-
 arch/arm/mach-imx/imx8m/Kconfig               |   1 +
 board/phytec/phycore_imx8mm/Kconfig           |   2 +-
 .../phytec/phycore_imx8mm/imximage-8mm-sd.cfg |   9 ++
 board/phytec/phycore_imx8mm/spl.c             |  19 +--
 configs/phycore-imx8mm_defconfig              |  22 ++-
 include/configs/phycore_imx8mm.h              |  18 +--
 8 files changed, 191 insertions(+), 36 deletions(-)
 create mode 100644 board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg

-- 
2.25.1

[PATCH 1/9] board: phytec: phycore_imx8mm: Clean up spl

[Teresa Remmet]

Remove not needed code in the spl board code.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
 board/phytec/phycore_imx8mm/spl.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c
index 64f0780f6e65..d54145ef995c 100644
--- a/board/phytec/phycore_imx8mm/spl.c
+++ b/board/phytec/phycore_imx8mm/spl.c
@@ -12,8 +12,6 @@
 #include <asm/global_data.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/iomux-v3.h>
-#include <dm/device.h>
-#include <dm/uclass.h>
 #include <hang.h>
 #include <init.h>
 #include <log.h>
@@ -39,7 +37,7 @@ int spl_board_boot_device(enum boot_device boot_dev_spl)
 	}
 }
 
-void spl_dram_init(void)
+static void spl_dram_init(void)
 {
 	ddr_init(&dram_timing);
 }
@@ -54,15 +52,10 @@ void spl_board_init(void)
 	puts("Normal Boot\n");
 }
 
-#ifdef CONFIG_SPL_LOAD_FIT
 int board_fit_config_name_match(const char *name)
 {
-	/* Just empty function now - can't decide what to choose */
-	debug("%s: %s\n", __func__, name);
-
 	return 0;
 }
-#endif
 
 #define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)
 #define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE)
@@ -91,7 +84,6 @@ int board_early_init_f(void)
 
 void board_init_f(ulong dummy)
 {
-	struct udevice *dev;
 	int ret;
 
 	arch_cpu_init();
@@ -100,8 +92,6 @@ void board_init_f(ulong dummy)
 
 	board_early_init_f();
 
-	timer_init();
-
 	preloader_console_init();
 
 	/* Clear the BSS. */
@@ -113,13 +103,6 @@ void board_init_f(ulong dummy)
 		hang();
 	}
 
-	ret = uclass_get_device_by_name(UCLASS_CLK,
-					"clock-controller@30380000", &dev);
-	if (ret < 0) {
-		printf("Failed to find clock node. Check device tree\n");
-		hang();
-	}
-
 	enable_tzc380();
 
 	/* DDR initialization */
-- 
2.25.1

[PATCH 2/9] include: configs: phycore_imx8mm: Remove hard coded network settings

[Teresa Remmet]

Remove ip address and server ip from board config as they should not
be added hardcoded.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
 include/configs/phycore_imx8mm.h | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
index 8d1fd153f62f..aa879122e844 100644
--- a/include/configs/phycore_imx8mm.h
+++ b/include/configs/phycore_imx8mm.h
@@ -37,10 +37,7 @@
 	"console=ttymxc2,115200\0" \
 	"fdt_addr=0x48000000\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"ipaddr=192.168.3.11\0" \
-	"serverip=192.168.3.10\0" \
-	"netmask=255.225.255.0\0" \
-	"ip_dyn=no\0" \
+	"ip_dyn=yes\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 	"mmcroot=2\0" \
-- 
2.25.1

[PATCH 3/9] include: configs: phycore-imx8mm: Remove not needed defines

[Teresa Remmet]

Remove obsolet defines in phycore_imx8mm.h.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
 include/configs/phycore_imx8mm.h | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
index aa879122e844..b13787bc2471 100644
--- a/include/configs/phycore_imx8mm.h
+++ b/include/configs/phycore_imx8mm.h
@@ -98,23 +98,14 @@
 #define CONFIG_MXC_UART_BASE		UART3_BASE_ADDR
 
 /* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_CBSIZE		SZ_2K
 #define CONFIG_SYS_MAXARGS		64
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
+
 /* USDHC */
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
-/* ENET1 */
-#define CONFIG_ETHPRIME			"FEC"
-#define CONFIG_FEC_XCV_TYPE		RGMII
-#define CONFIG_FEC_MXC_PHYADDR		0
-#define FEC_QUIRK_ENET_MAC
-#define IMX_FEC_BASE			0x30BE0000
-
 #endif /* __PHYCORE_IMX8MM_H */
-- 
2.25.1

[PATCH 4/9] include: configs: phycore-imx8mm: Do not use macro for address

[Teresa Remmet]

Do not use size macros for addesses. So convert PHYS_SDRAM to address.
No functional change.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
 include/configs/phycore_imx8mm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
index b13787bc2471..e74f2b27954f 100644
--- a/include/configs/phycore_imx8mm.h
+++ b/include/configs/phycore_imx8mm.h
@@ -91,7 +91,7 @@
 
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 
-#define PHYS_SDRAM			SZ_1G
+#define PHYS_SDRAM			0x40000000
 #define PHYS_SDRAM_SIZE                 SZ_2G /* 2GB DDR */
 
 /* UART */
-- 
2.25.1

[PATCH 5/9] arm: dts: phycore-imx8mm-u-boot: Add wdog pinctrl entry

[Teresa Remmet]

Add missing pinctrl entry in spl.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
 arch/arm/dts/phycore-imx8mm-u-boot.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/dts/phycore-imx8mm-u-boot.dtsi b/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
index 91515b8df9a0..7c2dfb4a273c 100644
--- a/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
@@ -30,6 +30,10 @@
 	u-boot,dm-spl;
 };
 
+&pinctrl_wdog {
+	u-boot,dm-spl;
+};
+
 &gpio1 {
 	u-boot,dm-spl;
 };
-- 
2.25.1

[PATCH 6/9] arm: dts: phycore-imx8mm: Fix property

[Teresa Remmet]

Fix misspelled property "stdout-path".

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
 arch/arm/dts/phycore-imx8mm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/dts/phycore-imx8mm.dts b/arch/arm/dts/phycore-imx8mm.dts
index c46d3c72ced9..a4332619e5f7 100644
--- a/arch/arm/dts/phycore-imx8mm.dts
+++ b/arch/arm/dts/phycore-imx8mm.dts
@@ -14,7 +14,7 @@
 	compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm";
 
 	chosen {
-		stdout-patch = &uart3;
+		stdout-path = &uart3;
 	};
 
 	reg_usdhc2_vmmc: regulator-usdhc2 {
-- 
2.25.1

[PATCH 7/9] board: phytec: phycore-imx8mm: Add SPI-NOR flash support

[Teresa Remmet]

Adds SPI-NOR flash support to erase, read and write in bootloader.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
 arch/arm/dts/phycore-imx8mm.dts  | 28 ++++++++++++++++++++++++++++
 configs/phycore-imx8mm_defconfig | 19 +++++++++++++++++++
 2 files changed, 47 insertions(+)

diff --git a/arch/arm/dts/phycore-imx8mm.dts b/arch/arm/dts/phycore-imx8mm.dts
index a4332619e5f7..e57dfd368d6b 100644
--- a/arch/arm/dts/phycore-imx8mm.dts
+++ b/arch/arm/dts/phycore-imx8mm.dts
@@ -54,6 +54,23 @@
 	};
 };
 
+/* SPI nor flash */
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: norflash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
 /* i2c eeprom */
 &i2c1 {
 	clock-frequency = <400000>;
@@ -140,6 +157,17 @@
 		>;
 	};
 
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 91360b7d1a5c..6cb2d368552e 100644
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -29,6 +29,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
+CONFIG_SPL_SPI_FLASH_MTD=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="u-boot=> "
@@ -44,6 +45,7 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SF_TEST=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -78,6 +80,20 @@ CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS400_ES_SUPPORT=y
 CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_FSL_ESDHC_IMX=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_BUS=3
+CONFIG_SF_DEFAULT_MODE=0x0
+CONFIG_SF_DEFAULT_SPEED=80000000
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_TI_DP83867=y
 CONFIG_DM_ETH=y
@@ -91,6 +107,9 @@ CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
-- 
2.25.1

[PATCH 8/9] configs: phycore-imx8mm_defconfig: Enable clk command

[Teresa Remmet]

Enable clk command to dump clock tree.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
 configs/phycore-imx8mm_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 6cb2d368552e..1897cb398ffd 100644
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -41,6 +41,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_SYS_EEPROM_SIZE=4096
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
+CONFIG_CMD_CLK=y
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
-- 
2.25.1

[PATCH 9/9] board: phytec: imx8mm-phycore: Switch to binman

[Teresa Remmet]

Use binman for image creation.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
 arch/arm/dts/phycore-imx8mm-u-boot.dtsi       | 122 ++++++++++++++++++
 arch/arm/mach-imx/imx8m/Kconfig               |   1 +
 board/phytec/phycore_imx8mm/Kconfig           |   2 +-
 .../phytec/phycore_imx8mm/imximage-8mm-sd.cfg |   9 ++
 configs/phycore-imx8mm_defconfig              |   2 +-
 5 files changed, 134 insertions(+), 2 deletions(-)
 create mode 100644 board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg

diff --git a/arch/arm/dts/phycore-imx8mm-u-boot.dtsi b/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
index 7c2dfb4a273c..f842e02c771b 100644
--- a/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
@@ -7,6 +7,10 @@
 #include "imx8mm-u-boot.dtsi"
 
 / {
+	binman: binman {
+		multiple-images;
+	};
+
 	wdt-reboot {
 		compatible = "wdt-reboot";
 		wdt = <&wdog1>;
@@ -69,3 +73,121 @@
 &wdog1 {
 	u-boot,dm-spl;
 };
+
+&binman {
+	u-boot-spl-ddr {
+		filename = "u-boot-spl-ddr.bin";
+		pad-byte = <0xff>;
+		align-size = <4>;
+		align = <4>;
+
+		u-boot-spl {
+			align-end = <4>;
+		};
+
+		blob_1: blob-ext@1 {
+			filename = "lpddr4_pmu_train_1d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_2: blob-ext@2 {
+			filename = "lpddr4_pmu_train_1d_dmem.bin";
+			size = <0x4000>;
+		};
+
+		blob_3: blob-ext@3 {
+			filename = "lpddr4_pmu_train_2d_imem.bin";
+			size = <0x8000>;
+		};
+
+		blob_4: blob-ext@4 {
+			filename = "lpddr4_pmu_train_2d_dmem.bin";
+			size = <0x4000>;
+		};
+	};
+
+	spl {
+		filename = "spl.bin";
+
+		mkimage {
+			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
+
+			blob {
+				filename = "u-boot-spl-ddr.bin";
+			};
+		};
+	};
+
+	itb {
+		filename = "u-boot.itb";
+
+		fit {
+			description = "Configuration to load ATF before U-Boot";
+			#address-cells = <1>;
+			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+
+			images {
+				uboot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					arch = "arm64";
+					compression = "none";
+					load = <CONFIG_SYS_TEXT_BASE>;
+
+					uboot_blob: blob-ext {
+						filename = "u-boot-nodtb.bin";
+					};
+				};
+
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+					load = <0x920000>;
+					entry = <0x920000>;
+
+					atf_blob: blob-ext {
+						filename = "bl31.bin";
+					};
+				};
+
+				fdt {
+					description = "NAME";
+					type = "flat_dt";
+					compression = "none";
+
+					uboot_fdt_blob: blob-ext {
+						filename = "u-boot.dtb";
+					};
+				};
+			};
+
+			configurations {
+				default = "conf";
+
+				conf {
+					description = "NAME";
+					firmware = "uboot";
+					loadables = "atf";
+					fdt = "fdt";
+				};
+			};
+		};
+	};
+
+	imx-boot {
+		filename = "flash.bin";
+		pad-byte = <0x00>;
+
+		spl: blob-ext@1 {
+			filename = "spl.bin";
+			offset = <0x0>;
+		};
+
+		uboot: blob-ext@2 {
+			filename = "u-boot.itb";
+			offset = <0x57c00>;
+		};
+	};
+};
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index ccaf106be5d8..269d9774b558 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -121,6 +121,7 @@ config TARGET_IMX8MN_BEACON
 
 config TARGET_PHYCORE_IMX8MM
 	bool "PHYTEC PHYCORE i.MX8MM"
+	select BINMAN
 	select IMX8MM
         select SUPPORT_SPL
 	select IMX8M_LPDDR4
diff --git a/board/phytec/phycore_imx8mm/Kconfig b/board/phytec/phycore_imx8mm/Kconfig
index 9868e984875e..25e4bf2f8367 100644
--- a/board/phytec/phycore_imx8mm/Kconfig
+++ b/board/phytec/phycore_imx8mm/Kconfig
@@ -10,6 +10,6 @@ config SYS_CONFIG_NAME
 	default "phycore_imx8mm"
 
 config IMX_CONFIG
-	default "arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg"
+	default "board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg"
 
 endif
diff --git a/board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg b/board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg
new file mode 100644
index 000000000000..ea74fb7e590f
--- /dev/null
+++ b/board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 Phytec Messtechnik GmbH
+ */
+
+#define __ASSEMBLY__
+
+BOOT_FROM       sd
+LOADER          u-boot-spl-ddr.bin      0x7E1000
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 1897cb398ffd..c22139874768 100644
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -21,7 +21,7 @@ CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_DEFAULT_FDT_FILE="oftree"
 CONFIG_BOARD_LATE_INIT=y
-- 
2.25.1

Re: [PATCH 0/9] phyCORE-i.MX8MM Updates

[Stefano Babic]

On 06.10.21 11:56, Teresa Remmet wrote:
> This patchstack contains mainly cleanup for phyCORE-i.MX8MM but
> also adds:
> * SPI NOR flash support
> * clk command
> * binman support
> 
> Teresa
> 
> Teresa Remmet (9):
>    board: phytec: phycore_imx8mm: Clean up spl
>    include: configs: phycore_imx8mm: Remove hard coded network settings
>    include: configs: phycore-imx8mm: Remove not needed defines
>    include: configs: phycore-imx8mm: Do not use macro for address
>    arm: dts: phycore-imx8mm-u-boot: Add wdog pinctrl entry
>    arm: dts: phycore-imx8mm: Fix property
>    board: phytec: phycore-imx8mm: Add SPI-NOR flash support
>    configs: phycore-imx8mm_defconfig: Enable clk command
>    board: phytec: imx8mm-phycore: Switch to binman
> 
>   arch/arm/dts/phycore-imx8mm-u-boot.dtsi       | 126 ++++++++++++++++++
>   arch/arm/dts/phycore-imx8mm.dts               |  30 ++++-
>   arch/arm/mach-imx/imx8m/Kconfig               |   1 +
>   board/phytec/phycore_imx8mm/Kconfig           |   2 +-
>   .../phytec/phycore_imx8mm/imximage-8mm-sd.cfg |   9 ++
>   board/phytec/phycore_imx8mm/spl.c             |  19 +--
>   configs/phycore-imx8mm_defconfig              |  22 ++-
>   include/configs/phycore_imx8mm.h              |  18 +--
>   8 files changed, 191 insertions(+), 36 deletions(-)
>   create mode 100644 board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg
> 

For all series:

Reviewed-by: Stefano Babic <sbabic@denx.de>

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 7/9] board: phytec: phycore-imx8mm: Add SPI-NOR flash support

[sbabic]

> Adds SPI-NOR flash support to erase, read and write in bootloader.
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 2/9] include: configs: phycore_imx8mm: Remove hard coded network settings

[sbabic]

> Remove ip address and server ip from board config as they should not
> be added hardcoded.
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 8/9] configs: phycore-imx8mm_defconfig: Enable clk command

[sbabic]

> Enable clk command to dump clock tree.
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 6/9] arm: dts: phycore-imx8mm: Fix property

[sbabic]

> Fix misspelled property "stdout-path".
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 3/9] include: configs: phycore-imx8mm: Remove not needed defines

[sbabic]

> Remove obsolet defines in phycore_imx8mm.h.
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 1/9] board: phytec: phycore_imx8mm: Clean up spl

[sbabic]

> Remove not needed code in the spl board code.
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 9/9] board: phytec: imx8mm-phycore: Switch to binman

[sbabic]

> Use binman for image creation.
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 4/9] include: configs: phycore-imx8mm: Do not use macro for address

[sbabic]

> Do not use size macros for addesses. So convert PHYS_SDRAM to address.
> No functional change.
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

[PATCH 5/9] arm: dts: phycore-imx8mm-u-boot: Add wdog pinctrl entry

[sbabic]

> Add missing pinctrl entry in spl.
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================