[PATCH v1 9/9] ARM: configs: Add defconfig for Nuvoton NPCM845

From: Stanley Chu <stanley.chuys@gmail.com>
To: lukma@denx.de, jagan@amarulasolutions.com,
	andre.przywara@arm.com, festevam@denx.de,
	narmstrong@baylibre.com, pbrobinson@gmail.com,
	tharvey@gateworks.com, christianshewitt@gmail.com,
	lokeshvutla@ti.com, sjg@chromium.org, sr@denx.de,
	michal.simek@xilinx.com, hs@denx.de, weijie.gao@mediatek.com,
	hannes.schmelzer@br-automation.com, harm.berntsen@nedap.com,
	sebastian.reichel@collabora.com, stephan@gerhold.net,
	fangyuanseu@gmail.com, kettenis@openbsd.org, seanga2@gmail.com,
	dsankouski@gmail.com, vabhav.sharma@nxp.com, bmeng.cn@gmail.com,
	patrick@blueri.se, samuel@sholland.org,
	giulio.benetti@benettiengineering.com, mr.bossman075@gmail.com,
	yschu@nuvoton.com, kwliu@nuvoton.com, ctcchien@nuvoton.com,
	avifishman70@gmail.com, tmaimon77@gmail.com
Cc: u-boot@lists.denx.de, openbmc@lists.ozlabs.org
Subject: [PATCH v1 9/9] ARM: configs: Add defconfig for Nuvoton NPCM845
Date: Wed, 15 Dec 2021 10:58:00 +0800	[thread overview]
Message-ID: <20211215025800.26918-10-yschu@nuvoton.com> (raw)
In-Reply-To: <20211215025800.26918-1-yschu@nuvoton.com>

Add defconfig for NPCM845 EVB (Arbel).

Signed-off-by: Stanley Chu <yschu@nuvoton.com>
---
 board/nuvoton/arbel/MAINTAINERS |  7 +++
 configs/arbel_evb_defconfig     | 77 +++++++++++++++++++++++++++++++++
 2 files changed, 84 insertions(+)
 create mode 100644 board/nuvoton/arbel/MAINTAINERS
 create mode 100644 configs/arbel_evb_defconfig

diff --git a/board/nuvoton/arbel/MAINTAINERS b/board/nuvoton/arbel/MAINTAINERS
new file mode 100644
index 0000000000..1086401f7d
--- /dev/null
+++ b/board/nuvoton/arbel/MAINTAINERS
@@ -0,0 +1,7 @@
+Arbel EVB
+M:	Stanley Chu <yschu@nuvoton.com>
+M:	Medad Cchien <ctcchien@nuvoton.com>
+S:	Maintained
+F:	board/nuvoton/arbel/
+F:	include/configs/arbel.h
+F:	configs/arbel_evb_defconfig
diff --git a/configs/arbel_evb_defconfig b/configs/arbel_evb_defconfig
new file mode 100644
index 0000000000..6efb72391a
--- /dev/null
+++ b/configs/arbel_evb_defconfig
@@ -0,0 +1,77 @@
+CONFIG_ARM=y
+CONFIG_ARCH_NPCM=y
+CONFIG_ARCH_NPCM8XX=y
+CONFIG_TARGET_ARBEL_EVB=y
+CONFIG_SYS_TEXT_BASE=0x8000
+CONFIG_SYS_LOAD_ADDR=0x10000000
+CONFIG_SYS_PROMPT="U-Boot>"
+CONFIG_SYS_MALLOC_LEN=0x240000
+CONFIG_SYS_MEMTEST_END=0x08000000
+CONFIG_SYS_MEMTEST_START=0
+CONFIG_DEFAULT_DEVICE_TREE="nuvoton-npcm845-evb"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_ENV_SIZE=0x40000
+CONFIG_ENV_SECT_SIZE=0x1000
+CONFIG_ENV_ADDR=0x80100000
+CONFIG_SF_DEFAULT_BUS=0
+CONFIG_SF_DEFAULT_CS=0
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_MTD_DEVICE=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_DM_SERIAL=y
+CONFIG_NPCM_SERIAL=y
+CONFIG_TIMER=y
+CONFIG_NPCM_TIMER=y
+CONFIG_CLK=y
+CONFIG_CMD_UUID=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_NPCM8XX=y
+CONFIG_PINCONF=y
+CONFIG_DM_GPIO=y
+CONFIG_NPCM_GPIO=y
+CONFIG_CMD_GPIO=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_DM_USB=y
+CONFIG_CMD_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_NEW=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_CMD_FAT=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NPCM_FIU_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_MEMORY=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_DHCP=y
+CONFIG_NET=y
+CONFIG_NETDEVICES=y
+CONFIG_PHY_BROADCOM=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_RGMII=y
+CONFIG_MII=y
+# CONFIG_EFI is not set
+# CONFIG_EFI_LOADER is not set
+# CONFIG_ENV_IS_IN_FLASH is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_PSCI_RESET is not set
+# CONFIG_INPUT is not set
-- 
2.17.1

